Selenium speciation analysis using inductively coupled plasma-mass spectrometry

Polymer properties of softwood organosolv lignins produced in two different reactor systems

Lignin, the second most abundant biopolymer on earth and with a predominantly aromatic structure, has the potential to be a raw material for valuable chemicals and other bio-based chemicals. In industry, lignin is underutilized by being used mostly as a fuel for producing thermal energy. Valorization of lignin requires knowledge of the structure and different linkages in the isolated lignin, making the study of structure of lignin important. In this article, lignin samples isolated from two types of reactors (autoclave reactor and displacement reactor) were analyzed by FT-IR, size exclusion chromatography, thermogravimetric analysis (TGA), and Py-GC-MS. The average molecular mass of the organosolv lignins isolated from the autoclave reactor decreased at higher severities, and FT-IR showed an increase in free phenolic content with increasing severity. Except for molecular mass and molecular mass dispersity, there were only minor differences between lignins isolated from the autoclave reactor and lignins isolated from the displacement reactor. Carbohydrate analysis, Py-GC-MS and TGA showed that the lignin isolated using either of the reactor systems is of high purity, suggesting that organosolv lignin is a good candidate for valorization.

Mitochondria-Targetable Ratiometric Time-Gated Luminescence Probe Activated by Selenocysteine for the Visual Monitoring of Liver Injuries

Liver injury can result from various risk factors including diabetes, virus, alcohol, drugs, and other toxins, which is mainly responsible for global mortality and morbidity. Selenocysteine (Sec), as the main undertaker of selenium function in the life system, features prominently in a series of hepatic injuries and has close association with the pathological progression of liver injuries. Here, we report a mitochondria-targetable lanthanide complex-based probe, Mito-NPTTA-Tb³⁺/Eu³⁺, that can be used for accurately determining Sec in live cells and laboratory animals via the ratiometric time-gated luminescence (TGL) technique. This probe is composed of 2,2':6',2″-terpyridine-Tb³⁺/Eu³⁺ mixed complexes as the luminophore, 2,4-dinitrophenyl (DNP) as the responsive moiety and a lipophilic triphenylphosphonium cation (PPh³⁺) as the mitochondria-targeting moiety. Upon reaction with Sec, accompanied by the cleavage of DNP from the probe molecule, the I₅₄₀/I₆₉₀ ratio of the probe increased by 55 times, which enabled Sec to be detected with the ratiometric TGL method. After being incubated with living cells, the probe molecules were selectively accumulated in mitochondria to allow the mitochondrial Sec to be successfully imaged under the ratiometric TGL mode. Importantly, using this probe coupled with the ratiometric TGL imaging technique, the fluctuations of liver Sec in various liver injuries of model mice induced by diabetes, drug, toxin, and alcohol were precisely monitored, revealing that Sec plays an important antioxidant role during the oxidative stress process in liver injury, and the Sec levels have a close interrelationship with the degree of liver injury. All the results suggest that the new probe Mito-NPTTA-Tb³⁺/Eu³⁺ could be a potential tool for the accurate diagnosis of liver injury.

The importance and status of the micronutrient selenium in South Africa: a review

Selenium (Se) is a vital micronutrient with widespread biological action but leads to toxicity when taken in excessive amounts. The biological benefits of Se are mainly derived from its presence in active sites of selenoproteins such as glutathione peroxidase (GPx). An enzyme whose role is to protect tissues against oxidative stress by catalysing the reduction of peroxidase responsible for various forms of cellular damage. The benefits of Se can be harvested when proper regulations of its intake are used. In South Africa, Se distribution in people's diets and animals are low with socio-economic factors and heterogeneous spread of Se in soil throughout the country playing a significant role. The possible causes of low Se in soils may be influenced by underlying geological material, climatic conditions, and anthropogenic activities. Sedimentary rock formations show higher Se concentrations compared to igneous and metamorphic rock formations. Higher Se concentrations in soils dominates in humid and sub-humid areas of South Africa. Furthermore, atmospheric acid deposition dramatically influences the availability of Se to plants. The studies reviewed in this article have shown that atomic absorption spectroscopy (AAS) is the most utilised analytical technique for total Se concentration determination in environmental samples and there is a lack of speciation data for Se concentrations. Shortcomings in Se studies have been identified, and the future research directions of Se in South Africa have been discussed.

Selenomethionine incorporation in proteins of individual mammalian cells determined with a genetically encoded fluorescent sensor

Selenomethionine (SeMet) randomly replaces methionine (Met) in protein translation. Because of strongly differing redox properties of SeMet and Met, SeMet mis-incorporation may have detrimental effects on protein function, possibly compromising the use of nutritional SeMet supplementation as an anti-oxidant. Studying the functional impact of SeMet in proteins on a cellular level is hampered by the lack of accurate and efficient methods for estimating the SeMet incorporation level in individual viable cells. Here we introduce and apply a method to measure the extent of SeMet incorporation in cellular proteins by utilizing a genetically encoded fluorescent methionine oxidation probe. Supplementation of SeMet in mammalian culture medium resulted in >84% incorporation of SeMet, and SeMet labeling as low as 5% was readily measured. Kinetics and extent of SeMet incorporation on the single-cell level under live-cell imaging conditions provided direct access to protein turn-over kinetics and SeMet redox properties in a cellular context. The method is furthermore suited for experiments utilizing high-throughput fluorescence microplate readers or fluorescence-activated cell sorting (FACS) analysis.

Environmental Impacts of Selenium Contamination: A Review on Current-Issues and Remediation Strategies in an Aqueous System

In both aquatic and terrestrial environment, selenium contamination may exist at concentrations above the micronutrient limit. Since there is such a narrow bandwidth between which selenium concentration is acceptable, the health of the public may be at risk of selenium toxicity once the concentration increases beyond a threshold. Selenium contamination in an aqueous environment can occur due to anthropogenic activities and/or from natural sources. This study presents a review of the forms of selenium, inorganic and organic selenium contamination, mobilization, analytical methods for various forms of selenium and remediation strategies. The review also provides recent advances in removal methods for selenium from water including bioremediation, precipitation, coagulation, electrocoagulation, adsorption, nano-zerovalent iron, iron co-precipitation and other methods. A review of selenomethionine and selenocysteine removal strategy from industrial wastewaters is presented. Selenium resource recovery from copper ore processing has been discussed. Various analytical methods used for selenium and heavy metal analysis were compared. Importantly, existing knowledge gaps were identified and prospective areas for further research were recommended.

Hollow Zinc Oxide Microflowers for Selective Preconcentration of Selenium Ions in Natural Water

Background:

Selenium’s popularity in a wide variety of products and industries means that it has, unfortunately, become a common environmental pollutant, particularly from sources such as industrial wastewater discharge and agricultural runoff.

Objective:

Quantification of the selenium (IV) ion content of natural water sources via atomic fluorescence spectrophotometry (AFS) was performed using hollow ZnO microflowers as the enriched materials. The hollow ZnO microflowers were prepared via a hydrothermal method with polystyrene (PS) microspheres as the template.

Methods:

Since the pH of the selenium (IV) solution is known to influence the degree of adsorption onto the sorbent, both the acidity of adsorption and elution were studied at various pH values to obtain the adsorption isotherm and adsorption capacity of the sorbent. AFS was used to quantify the amount of selenium ion that was present in the samples. The structure of the hollow ZnO microflowers was characterized using XRD, SEM, and TEM characterization methodologies.

Results:

When the pH was between 6.0 and 7.0, the percentage of Se (IV) adsorption was as high as 93%. It was found that the amount of Se (IV) that was eluted from the sorbent exceeded 96% with 5.0 mL of a 0.01 mol L−1 NaOH solution over the course of 10 minutes. The maximum adsorption capacity was 31.5, 31.8, and 32.0 mg·g−1 at 273, 333, and 353 K, respectively.

Conclusion:

The LOD for Se (IV) detection via enrichment was achieved at 0.006 μg L−1 with a linear range between 0.1 and 200 μg L−1. Thus, this method is applicable to the analysis of natural water samples and GBW(E)080394.

Determination of eleven small selenium species in human urine by chromatographic-coupled ICP-MS methods

BACKGROUND

The determination of various selenium species in urine enables a specific biomonitoring of the exposure to different selenium compounds.

METHODS

For this task a coupling of three chromatographic techniques with ICP-MS was developed for the separate quantification of eleven species in urine. The first procedure was based on reverse phase chromatography and was designed for the separate determination of methyl-2-acetamido-2-deoxy-1-seleno-b-d-galactopyranoside (SeSug1), methyl-2-acetamido-2-deoxy-1-seleno-b-d-glucopyranoside (SeSug2), selenomethionine (SeMet), methylselenocysteine (MeSeC), seleno-D,L-ethionine (SeEt), methylselenic acid (MeSeA) and methylselenoglutathione (MeSeG); the second procedure was based on anion exchange chromatography and measured selenate (Se (VI)) and selenite (Se (IV)); the third procedure was based on cationic exchange chromatography and determined methyl-2-amino-2-deoxy-1-seleno-b-d-galactopyranoside (SeSug3) and the trimethylselenium ion (TMSe). A fourth method for the more sensitive determination of TMSe was upgraded by an on-line after-column reaction process.

RESULTS

The validation of the methods yielded sensitive detection limits of the species between 0.03 and 0.10 μg Se/L. For TMSe a detection limit of 0.02 μg Se/L resulted by the fourth method. An intra-day precision of 2.7-10.6% and a relative recovery between 87 % and 108 % confirm the robustness of the methods.

CONCLUSION

The developed procedures enable a separate and sensitive determination of eleven selenium species in urine and thus permit the exploring of metabolic factors in the general population and particularly exposed individuals.

Influence of selenium yeast on the growth, selenium uptake and mineral composition of Coriolus versicolor mushroom

The ability of Coriolus versicolor medicinal mushroom to grow and accumulate selenium during submerged cultivation in a selenium-fortified medium is examined in this paper. For selenium supplementation, commercial selenium yeast was used. Control, nonenriched sample and reference cultures cultivated in the medium enriched with commercial yeast Saccharomyces cerevisiae were also prepared. The mushroom demonstrated a high ability to accumulate selenium from the added source (around 970 and 1,300 µg/g of dry mycelium weight for samples enriched with selenium in a concentration of 10 and 20 mg Se/L, respectively). The addition of selenium significantly (p ≤ .05) increased the biomass yield, whereas the addition of nonenriched yeast had no significant (p ≤ .05) impact. Furthermore, regression analysis showed statistically significant (p ≤ .05) and positive correlations between the content of Se and Fe (r = .92), Se and Cu (r = .92), Se and Mn (r = .98), and Se and Sr (r = .96), suggesting that selenium incorporation was followed by incorporation of these elements, and led to mineral enrichment of the obtained mycelium. Methanol extracts prepared from mycelium biomass demonstrated a better inhibitory effect on Gram-positive bacterial strains with minimal inhibitory concentrations between <0.3125 and 40 mg/ml. The obtained results showed that selenium yeast could be used for obtaining a potential novel food supplement: mushroom biomass with high selenium content and enhanced mineral composition.

Effect of milking frequency and α-tocopherol plus selenium supplementation on sheep milk lipid composition and oxidative stability

The aim of this research was to study the effect of milking frequency [once-daily milking (ODM) vs. twice-daily milking (TDM)] and antioxidant (AOX) supplementation on fatty acid (FA) profile and oxidative stability in sheep milk. Sixteen Assaf ewes were used; 8 did not receive any vitamin-mineral supplement (control), and the other 8 received an oral dose of 1,000 IU of α-tocopherol and 0.4 mg of Se daily. The experiment consisted of 2 consecutive periods; the first was 3 wk with TDM of both mammary glands. The second period was 8 wk and consisted of ODM of one mammary gland and TDM of the other gland. All ewes were fed ad libitum the same total mixed ration from lambing and throughout the experiment. There were no differences in plasma or milk Se concentrations between control and AOX ewes. However, plasma and milk α-tocopherol concentrations and AOX capacity were increased in ewes receiving the AOX supplement. Milk FA profile was practically unaffected after 21 d of AOX supplementation. However, after 77 d, AOX supplementation increased the relative percentage of C16:0 and cis-9 C18:1 and reduced the proportions of some saturated FA with less than 16 carbons and cis-9 C12:1. Antioxidant supplementation had no effect on the proportions of conjugated linoleic acid or total polyunsaturated FA (PUFA) but decreased the proportion of trans-7,cis-9 C18:2 and increased that of n-6 C20:3. Once-daily milking did not affect α-tocopherol, Se, or fat resistance to oxidation in milk. Total monounsaturated FA, cis-9 C16:1, and several cis and trans isomers of C18:1 were increased and total saturated FA were decreased in milk from ODM glands. Compared with TDM, ODM increased the proportions of cis-9,cis-12 C18:2 and several isomers of C18:2 and reduced those of cis-9,cis-12,cis-15 C18:3 and some PUFA of 20 and 22 carbons, but total proportion of PUFA was unaffected. Once-daily milking and AOX supplementation modified milk FA profile, but the effects of ODM could be considered of little biological relevance for consumer health. Supplementing ewes with α-tocopherol plus Se could be considered an effective strategy to improve plasma AOX status and reduce milk fat oxidation without substantial changes in the milk FA profile.

A rapid and sensitive IC-ICP-MS method for determining selenium speciation in natural waters

Selenium (Se) is an element monitored by water quality agencies worldwide. The challenge of assessing its presence in aquatic systems is its low concentrations (parts per trillion) and the need for determining its chemical speciation. A method was developed using an ion chromatograph (IC) paired with a quadrupole inductively coupled plasma mass spectrometer (ICP-MS) equipped with a hydrogen reaction cell to provide analysts with a rapid and sensitive method to measure Se speciation with suitable accuracy and precision. The Se species selenite (SeIV) and selenate (SeVI) were separated within a 5 min span using dilute nitric acid as a mobile phase in a step-wise gradient (50–400 mmol L−1) and quantified using 80Se isotope that yielded low limits of detection (<10 ng L−1). Spectral interference from plasma generated diatomic argon ions (40Ar2+; m/z = 80) on 80Se was eliminated by hydrogen gas (H2) in the reaction cell. Polyatomic 79Br1H+ (m/z = 80) did not interfere with 80Se for quantification of common aquatic Se species (SeVI and SeIV) due to different column retention times. Two organic species (methylselenocysteine and selenomethionine) commonly found in aquatic and terrestrial plant tissues were also tested to rule out possible chromatographic interference and explore the potential application to biological samples. Urban rainwater and Canadian river water samples were analyzed for Se species to demonstrate the applicability of the method. Owing to its ability to rapidly determine Se species in water samples at environmentally relevant concentrations, the method may be useful for monitoring agencies to routinely measure Se species in freshwater aquatic systems.

Evaluation Selenocysteine Protective Effect in Carbon Disulfide Induced Hepatitis with a Mitochondrial Targeting Ratiometric Near-Infrared Fluorescent Probe

As important active sites of oxidoreductase in mitochondria, selenocysteine (Sec) takes the responsibility for cytoprotective effect and intracellular redox homeostasis. Carbon disulfide (CS₂) is a common solvent in industry, which can inhibit the activities of oxidoreductase and induce oxidative stress. It is necessary to investigate the cytoprotective effect of Sec against CS₂ exposure. After integrated, the response moiety 2,4-dinitrobenzenesulfonamide and mitochondrial targeting moiety into the near-infrared heptamethine cyanine fluorophore, we develop a mitochondrial targeting near-infrared ratiometric fluorescent probe Mito- diNO₂ for the selective and sensitive analysis of Sec concentration fluctuations in living cells and in mice models under the stimulation of CS₂. The probe can effectively accumulate in mitochondria and selectively detect the endogenous Sec concentrations in BRL 3A, RH-35, HL-7702, HepG2, and SMMC-7721 cell lines. The results indicate that CS₂ exposure can lead to a decrease of Sec level and result in mitochondrial related acute inflammation. The exogenous supplement of Sec can protect cells from oxidative damage and reduce the symptoms of inflammation. We also establish CS₂ induced acute and chronic hepatitis mice models to examine the tissue toxicity of CS₂ and cytoprotection of Sec in liver. The organism can increase the concentration of Sec to deal with the damage caused by CS₂ in acute hepatitis mice model. Also the exogenous supplement of Sec for the two mice models can effectively defend the CS₂ induced liver damage. The real-time imaging of Sec concentrations in liver can be used to assess the degrees of liver injury during CS₂ poisoning. The above applications make our probe a potential candidate for the clinical accurate diagnosis and treatment of CS₂ poisoning.

Diet composition and serum levels of selenium species: A cross-sectional study

Selenium is a trace element of both nutritional and toxicological interest, depending on its dose and chemical form. Diet is the primary source of exposure for most individuals. We sought to investigate the influence of food intake on serum levels of selenium species. Among fifty subjects randomly selected from a Northern Italian population, we assessed dietary habits using a validated semi-quantitative food frequency questionnaire. We also measured circulating levels of selenium species in serum using high pressure liquid chromatography associated with inductively-coupled plasma dynamic reaction cell mass spectrometer. Circulating levels of inorganic selenium, the most toxic selenium species, were positively associated with intake of fish, legumes and dry fruits, and inversely associated with intake of dairy products and mushrooms. Concerning the organic selenium species, selenoproteinP-bound selenium was inversely associated with intake of fish, fresh fruits, vegetables, and legumes, while selenocysteine-bound selenium positively associated with intake of fresh fruit, potato, legume and mushroom. In the present study, intakes of different foods were correlated with different types of selenium species. These results have important public health implications when assessing the nutritional and toxicological potential of diet composition with reference to selenium exposure.

Biology and toxicology of tellurium explored by speciation analysis

Tellurium (Te) is widely used in industry because it has unique physicochemical properties. Although Te is a non-essential element in animals and plants, it is expected to be metabolized to organometallic compounds having a carbon-Te bond in living organisms exposed to inorganic Te compounds. Thus, the speciation and identification of tellurometabolites are expected to contribute to the depiction of the metabolic chart of Te. Speciation by elemental mass spectrometry and identification by molecular mass spectrometry coupled with separation techniques have significantly contributed to the discovery of tellurometabolites in animals and plants. The aim of this mini review is to present recent advances in the biology and toxicology of tellurium as revealed by speciation and identification by molecular mass spectrometry.

Application of enzymatic probe sonication for selenium speciation in animal feeds

Enzymatic probe sonication (EPS) was investigated as a novel and alternative technology for the extraction of five Se species SeCys₂, MeSeCys, Se (IV), SeMet and Se (VI) from animal feeds. The critical parameters of EPS such as enzyme types, ultrasonic power, sample/enzyme ratio, extraction time and temperature were carefully optimized. Under current conditions, one sample can be extracted in 60s, in contrast to several hours required by the conventional enzymatic methods Moreover, the extraction is performed in pure water, no further temperature control or pH adjustment is needed, and therefore the risk of species interconvertion is drastically reduced or inhibited. The Se species were separated and quantitatively determined by high-performance liquid chromatography-hydride generation atomic fluorescence spectrometry (HPLC-HG-AFS), which allows the separation of organic and inorganic Se species in a single chromatographic run. The newly developed method was successfully applied to the determination of Se species in 18 feed samples collected from markets and local farms. Concerning the feed samples studied, the results of this work suggest that stricter measures should be taken to control the Se-enriched feed supplements in terms of Se species.

Deproteinization assessment using isotopically enriched compounds to trace the coprecipitation of low-molecular-weight selenium species with proteins

Studies have shown that information related to the presence of low-molecular-weight metabolites is frequently lost after deproteinization of complex matrices, such as blood and plasma, during sample preparation. Therefore, the effect of several deproteinization reagents on low-molecular-weight selenium species has been compared by species-specific isotope labeling. Two isotopically enriched selenium tracers were used to mimic models of small inorganic anionic (⁷⁷Se-selenite) and organic zwitterionic (⁷⁶Se-selenomethionine) species. The results presented here show that the use of a methanol-acetonitrile-acetone (1:1:1 v/v/v) mixture provided approximately two times less tracer loss from plasma samples in comparison with the classic procedure using acetonitrile, which may not be optimal as it leads to important losses of low-molecular-weight selenium species. In addition, the possible interactions between selenium tracers and proteins were investigated, revealing that both coprecipitation phenomena and association with proteins were potentially responsible for selenite tracer losses during protein precipitation in blood samples. However, coprecipitation phenomena were found to be fully responsible for losses of both tracers observed in plasma samples and of the selenomethionine tracer in blood samples. This successfully applied strategy is anticipated to be useful for more extensive future studies in selenometabolomics.

Bioaccumulation and distribution of selenium in Enterococcus durans

Selenium is an essential nutrient for all living organisms. Under appropriate conditions lactic acid bacteria (LAB) are capable for accumulating large amounts of trace elements, such as selenium, and incorporating them into organic compounds. In this study, the capacity of selenium bioaccumulation by Enterococcus durans LAB18s was evaluated. The distribution of organic selenium in selenium-enriched E. durans LAB18s biomass was analyzed, and the highest percentage of organic selenium was found in the fraction of total protein, followed by the fractions of polysaccharides and nucleic acids. When the protein fraction was obtained by different extractions (water, NaCl, ethanol and NaOH) it was demonstrated that alkali-soluble protein showed the higher Selenium content. Analysis of protein fractions by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) revealed that selenium was present in the proteins ranging from 23 to 100kDa. The cells were analyzed by scanning electron microscopy (SEM); scanning electron microscopy/energy dispersive spectrometry (SEM/EDS) and transmission electron microscopy (TEM). SEM, TEM and SEM/EDS showed the morphology, the selenium particles bioaccumulated into and on the cells and the amounts of selenium present into the cells, respectively. Thus, the isolate E. durans LAB18s can be a promising probiotic to be used as selenium-enriched biomass in feed trials.

Ionic liquid-assisted separation and determination of selenium species in food and beverage samples by liquid chromatography coupled to hydride generation atomic fluorescence spectrometry

Different ionic liquids (ILs) were assayed as mobile phase modifiers for the separation and determination of selenite [Se(IV)], selenate [Se(VI)], selenomethionine (SeMet) and Se-methylselenocysteine (SeMeSeCys) by reversed-phase high-performance liquid chromatography coupled to hydride generation atomic fluorescence spectrometry (RP-HPLC-HG-AFS). The use of several ILs: 1-butyl-3-methylimidazolium chloride, 1-hexyl-3-methylimidazolium chloride ([C₆mim]Cl), 1-octyl-3-methylimidazolium chloride, 1-dodecyl-3-methylimidazolium bromide, 1-hexadecyl-3-methylimidazolium bromide and tributyl(methyl)phosphonium methylsulphate was evaluated. Also, the effect of pH, buffer type and IL concentration on the separation of Se species was studied. Complete separation was attained within 12min using a C₈ column and a gradient performed with a mobile phase containing 0.1% (v/v) [C₆mim]Cl at pH 6.0. The proposed method allows the separation of inorganic and organic Se species in a single chromatographic run, adding further benefits over already reported methods based on RP-HPLC. In addition, the influence of ILs on the AFS signals of each Se species was evaluated and a multivariate methodology was used for optimization of AFS sensitivity. The limits of detection were 0.92, 0.86, 1.41 and 1.19μgL^-1 for Se(IV), Se(VI), SeMet and SeMeSeCys, respectively. The method was successfully applied for speciation analysis of Se in complex samples, such as wine, beer, yeast and garlic.

Sorption and speciation of selenium in boreal forest soil

Sorption and speciation of selenium in the initial chemical forms of selenite and selenate were investigated in batch experiments on humus and mineral soil samples taken from a 4-m deep boreal forest soil excavator pit on Olkiluoto Island, on the Baltic Sea coast in southwestern Finland. The HPLC-ICP-MS technique was used to monitor any possible transformations in the selenium liquid phase speciation and to determine the concentrations of selenite and selenate in the samples for calculation of the mass distribution coefficient, K_d, for both species. Both SeO₃^2- and SeO₄^2- proved to be resistant forms in the prevailing soil conditions and no changes in selenium liquid phase speciation were seen in the sorption experiments in spite of variations in the initial selenium species, incubation time or conditions, pH, temperature or microbial activity. Selenite sorption on the mineral soil increased with time in aerobic conditions whilst the opposite trend was seen for the anaerobic soil samples. Selenite retention correlated with the contents of organic matter and weakly crystalline oxides of aluminum and iron, solution pH and the specific surface area. Selenate exhibited poorer sorption on soil than selenite and on average the K_d values were 27-times lower. Mineral soil was more efficient in retaining selenite and selenate than humus, implicating the possible importance of weakly crystalline aluminum and iron oxides for the retention of oxyanions in Olkiluoto soil. Sterilization of the soil samples decreased the retention of selenite, thus implying some involvement of soil microbes in the sorption processes or a change in sample composition, but it produced no effect for selenate. There was no sorption of selenite by quartz, potassium feldspar, hornblende or muscovite. Biotite showed the best retentive properties for selenite in the model soil solution at about pH 8, followed by hematite, plagioclase and chlorite. The K_d values for these minerals were 18, 14, 8 and 7 L/kg, respectively. It is proposed that selenite sorption is affected by the structural Fe(II) in biotite, which is capable of inducing the reduction of SeO₃^2- to Se(0). Selenite probably forms a surface complex with Fe(III) atoms on the surface of hematite, thus explaining its retention on this mineral. None of the minerals retained selenate to any extent.

Operationally defined species characterization and bioaccessibility evaluation of cobalt, copper and selenium in Cape gooseberry (Physalis Peruviana L.) by SEC-ICP MS

Physalis peruviana could attract great interest because of its nutritional and industrial properties. It is an excellent source of vitamins, minerals, essential fatty acids and carotenoids. Physalis Peruviana is also known to have a positive impact on human health. Unfortunately, still little is known about trace elements present in Physalis Peruviana and their forms available for the human body. Thus, the aim of this study was to estimate bioaccessibility and characterization of species of cobalt, copper and selenium in Physalis Peruviana fruits. Total and extractable contents of elements were determined by mass spectrometer with inductively coupled plasma (ICP MS). In order to separate the different types of metal complexes Physalis peruviana fruits were treated with the following solvents: Tris-HCl (pH 7.4), sodium dodecyl sulfate (SDS) (pH 7.4) and ammonium acetate (pH 5.5). The best efficiency of extraction of: cobalt was obtained for ammonium acetate (56%) and Tris-HCl (60%); for copper was obtained for SDS (66%), for selenium the best extraction efficiency was obtained after extraction with SDS (48%). To obtain information about bioaccessibility of investigated elements, enzymatic extraction based on in vitro simulation of gastric (pepsin) and intestinal (pancreatin) digestion was performed. For copper and selenium the simulation of gastric digestion leads to the extraction yield above 90%, while both steps of digestion method were necessary to obtain satisfactory extraction yield in the case of cobalt. Size exclusion chromatography (SEC) coupled to on-line ICP MS detection was used to investigate collected metal species. The main fraction of metal compounds was found in the 17 kDa region. Cobalt and copper create complexes mostly with compounds extracted by means of ammonium acetate and SDS, respectively. Cobalt, copper and selenium were found to be highly bioaccessible from Physalis Peruviana. Investigation of available standards of cobalt and selenium allows confirming the presence of vitamin B12 and probably selenomethionine in the fraction bioaccessible by human body (obtained during enzymatic extraction). It should be noted that the presence of small seleno-compounds in Cape gooseberry was performed for the first time. The results show that the combination of SEC and ICP MS could provide a simple method for separating of soluble element species.

Importance of selenium and selenoprotein for brain function: From antioxidant protection to neuronal signalling

Multiple biological functions of selenium manifest themselves mainly via 25 selenoproteins that have selenocysteine at their active centre. Selenium is vital for the brain and seems to participate in the pathology of disorders such as Alzheimer's disease, Parkinson's disease, amyotrophic lateral sclerosis and epilepsy. Since selenium was shown to be involved in diverse functions of the central nervous system, such as motor performance, coordination, memory and cognition, a possible role of selenium and selenoproteins in brain signalling pathways may be assumed. The aim of the present review is to analyse possible relations between selenium and neurotransmission. Selenoproteins seem to be of special importance in the development and functioning of GABAergic (GABA, γ-aminobutyric acid) parvalbumin positive interneurons of the cerebral cortex and hippocampus. Dopamine pathway might be also selenium dependent as selenium shows neuroprotection in the nigrostriatal pathway and also exerts toxicity towards dopaminergic neurons under higher concentrations. Recent findings also point to acetylcholine neurotransmission involvement. The role of selenium and selenoproteins in neurotransmission might not only be limited to their antioxidant properties but also to inflammation, influencing protein phosphorylation and ion channels, alteration of calcium homeostasis and brain cholesterol metabolism. Moreover, a direct signalling function was proposed for selenoprotein P through interaction with post-synaptic apoliprotein E receptors 2 (ApoER2).

Nanomembrane Canister Architectures for the Visualization and Filtration of Oxyanion Toxins with One-Step Processing

Nanomembrane canister-like architectures were fabricated by using hexagonal mesocylinder-shaped aluminosilica nanotubes (MNTs)-porous anodic alumina (PAA) hybrid nanochannels. The engineering pattern of the MNTs inside a 60 μm-long membrane channel enabled the creation of unique canister-like channel necks and cavities. The open-tubular canister architecture design provides controllable, reproducible, and one-step processing patterns of visual detection and rejection/permeation of oxyanion toxins such as selenite (SeO3(2-)) in aquatic environments (i.e., in ground and river water sources) in the Ibaraki Prefecture of Japan. The decoration of organic ligand moieties such as omega chrome black blue (OCG) into inorganic Al2O3@tubular SiO2/Al2O3 canister membrane channel cavities led to the fabrication of an optical nanomembrane sensor (ONS). The OCG ligand was not leached from the canister as observed in washing, sensing, and recovery assays of selenite anions in solution, which enabled its multiple reuse. The ONS makes a variety of alternate processing analyses of selective quantification, visual detection, rejection/permeation, and recovery of toxic selenite quick and simple without using complex instrumentation. Under optimal conditions, the ONS canister exhibited a high selectivity toward selenite anions relative to other ions and a low-level detection limit of 0.0093 μM. Real analytical data showed that approximately 96% of SeO3(2-) anions can be recovered from aquatic and wastewater samples. The ONS canister holds potential for field recovery applications of toxic selenite anions from water.

Detoxification of selenite to form selenocyanate in mammalian cells

When human hepatoma HepG2 cells were exposed to sodium selenite, an unknown selenium metabolite was detected in the cytosolic fraction by HPLC-inductively coupled plasma mass spectrometry (ICP-MS). The unknown selenium metabolite was also detected in the mixture of HepG2 homogenate and sodium selenite in the presence of exogenous glutathione (GSH). The unknown selenium metabolite was identified as selenocyanate by electrospray ionization mass spectrometry (ESI-MS) and ESI quadrupole time-of-flight mass spectrometry (ESI-Q-TOF-MS). Because exogenous cyanide increased the amount of selenocyanate in the mixture, selenocyanate seemed to be formed by the reaction between selenide or its equivalent, the product of the reduction of selenite, and endogenous cyanide. Rhodanase, an enzyme involved in thiocyanate synthesis, was not required for the formation of selenocyanate. Selenocyanate was less toxic to HepG2 cells than selenite or cyanide, suggesting that it was formed to reduce the toxicity of selenite. However, selenocyanate could be assimilated into selenoproteins and selenometabolites in rats in the same manner as selenite. Consequently, selenite was metabolized to selenocyanate to temporarily ameliorate its toxicity, and selenocyanate acted as an intrinsic selenium pool in cultured cells exposed to surplus selenite.

Biochemical Comparison of Commercial Selenium Yeast Preparations

The trace mineral selenium (Se) is an essential element for human and animal nutrition. The addition of Se to the diet through dietary supplements or fortified food/feed is increasingly common owing to the often sub-optimal content of standard diets of many countries. Se supplements commercially available include the inorganic mineral salts such as sodium selenite or selenate, and organic forms such as Se-enriched yeast. Today, Se yeast is produced by several manufacturers and has become the most widely used source of Se for human supplementation and is also widely employed in animal nutrition where approval in all species has been granted by regulatory bodies such as the European Food Safety Authority (EFSA). Characterisation and comparison of Se-enriched yeast products has traditionally been made by quantifying total selenomethionine (SeMet) content. A disadvantage of this approach, however, is that it does not consider the effects of Se deposition on subsequent digestive availability. In this study, an assessment was made of the water-soluble extracts of commercially available Se-enriched yeast samples for free, peptide-bound and total water-soluble SeMet. Using LC-MS/MS, a total of 62 Se-containing proteins were identified across four Se yeast products, displaying quantitative/qualitative changes in abundance relative to the certified reference material, SELM-1 (P value <0.05; fold change ≥2). Overall, the study indicates that significant differences exist between Se yeast products in terms of SeMet content, Se-containing protein abundance and associated metabolic pathways.

Influence of Dietary Selenium Species on Selenoamino Acid Levels in Rainbow Trout

Two forms of selenium (Se) supplementation of fish feeds were compared in two different basal diets. A 12-week feeding trial was performed with rainbow trout fry using either a plant-based or a fish meal-based diet. Se yeast and selenite were used for Se supplementation. Total Se and Se speciation were determined in both diets and whole body of trout fry using inductively coupled plasma mass spectrometry (ICP MS) and high-performance liquid chromatography (HPLC). The two selenoamino acids, selenomethionine (SeMet) and selenocysteine (SeCys), were determined in whole body of fry after enzymatic digestion using protease type XIV with a prior derivatization step in the case of SeCys. The plant-based basal diet was found to have a much lower total Se than the fish meal-based basal diet with concentrations of 496 and 1222 μg(Se) kg(-1), respectively. Dietary Se yeast had a higher ability to raise whole body Se compared to selenite. SeMet concentration in the fry was increased only in the case of Se yeast supplementation, whereas SeCys levels were similar at the end of the feeding trial for both Se supplemented forms. The results show that the fate of dietary Se in fry is highly dependent on the form brought through supplementation and that a plant-based diet clearly benefits from Se supplementation.

Selenium contaminated waters: An overview of analytical methods, treatment options and recent advances in sorption methods

Selenium is an essential trace element for many organisms, including humans, but it is bioaccumulative and toxic at higher than homeostatic levels. Both selenium deficiency and toxicity are problems around the world. Mines, coal-fired power plants, oil refineries and agriculture are important examples of anthropogenic sources, generating contaminated waters and wastewaters. For reasons of human health and ecotoxicity, selenium concentration has to be controlled in drinking-water and in wastewater, as it is a potential pollutant of water bodies. This review article provides firstly a general overview about selenium distribution, sources, chemistry, toxicity and environmental impact. Analytical techniques used for Se determination and speciation and water and wastewater treatment options are reviewed. In particular, published works on adsorption as a treatment method for Se removal from aqueous solutions are critically analyzed. Recent published literature has given particular attention to the development and search for effective adsorbents, including low-cost alternative materials. Published works mostly consist in exploratory findings and laboratory-scale experiments. Binary metal oxides and LDHs (layered double hydroxides) have presented excellent adsorption capacities for selenium species. Unconventional sorbents (algae, agricultural wastes and other biomaterials), in raw or modified forms, have also led to very interesting results with the advantage of their availability and low-cost. Some directions to be considered in future works are also suggested.

Synthesis and characterization of Se-adenosyl-L-selenohomocysteine selenoxide

Selenium is an essential micronutrient in humans due to the important roles of the selenocysteine-containing selenoproteins. Organoselenium metabolites are generally found to be substrates for the biochemical pathways of their sulfur analogs, and the redox chemistry of selenomethionine and some other metabolites have been previously reported. We now report the first synthesis and characterization of Se-adenosylselenohomocysteine selenoxide (SeAHO) prepared via hydrogen peroxide oxidation of Se-adenosylselenohomocysteine (SeAH). The selenoxide SeAHO, in contrast to its corresponding sulfoxide S-adenosylhomocysteine (SAHO), can form hydrate, has an electrostatic interaction between the α-amino acid moiety and the highly polar selenoxide functional group, and readily oxidizes glutathione (GSH) and cysteine thiols.

Selenium compounds as therapeutic agents in cancer

BACKGROUND

With cancer cells encompassing consistently higher production of reactive oxygen species (ROS) and with an induced antioxidant defense to counteract the increased basal ROS production, tumors have a limited reserve capacity resulting in an increased vulnerability of some cancer cells to ROS. Based on this, oxidative stress has been recognized as a tumor-specific target for the rational design of new anticancer agents. Among redox modulating compounds, selenium compounds have gained substantial attention due to their promising chemotherapeutic potential.

SCOPE OF REVIEW

This review aims in summarizing and providing the recent developments of our understanding of the molecular mechanisms that underlie the potential anticancer effects of selenium compounds.

MAJOR CONCLUSIONS

It is well established that selenium at higher doses readily can turn into a prooxidant and thereby exert its potential anticancer properties. However, the biological activity of selenium compounds and the mechanism behind these effects are highly dependent on its speciation and the specific metabolic pathways of cells and tissues. Conversely, the chemical properties and the main molecular mechanisms of the most relevant inorganic and organic selenium compounds as well as selenium-based nanoparticles must be taken into account and are discussed herein.

GENERAL SIGNIFICANCE

Elucidating and deepening our mechanistic knowledge of selenium compounds will help in designing and optimizing compounds with more specific antitumor properties for possible future application of selenium compounds in the treatment of cancer. This article is part of a Special Issue entitled Redox regulation of differentiation and de-differentiation.

Efficient interface for online coupling of capillary electrophoresis with inductively coupled plasma-mass spectrometry and its application in simultaneous speciation analysis of arsenic and selenium

A simple and highly efficient online system coupling of capillary electrophoresis to inductively coupled plasma-mass spectrometry (CE-ICP-MS) for simultaneous separation and determination of arsenic and selenium compounds was developed. CE was coupled to an ICP-MS system by a sprayer with a novel direct-injection high-efficiency nebulizer (DIHEN) chamber as the interface. By using this interface, six arsenic species, including arsenite (As(III), arsenate (As(V)), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB), and arsenocholine (AsC) and five selenium species (such as sodium selenite (Se(IV)), sodium selenate (Se(VI)), selenocysteine (SeCys), selenomethionine (SeMet), and Se-methylselenocysteine (MeSeCys)) were baseline-separated and determined in a single run within 9 min under the optimized conditions. Minimum dead volume, low and steady sheath flow liquid, high nebulization efficiency, and high sample transport efficiency were obtained by using this interface. Detection limits were in the range of 0.11-0.37 μg L(-1) for the six arsenic compounds (determined as (75)As at m/z 75) and 1.33-2.31 μg L(-1) for the five selenium species (determined as (82)Se at m/z 82). Repeatability expressed as the relative standard deviations (RSD, n = 6) of both migration time and peak area were better than 2.68% for arsenic compounds and 3.28% for selenium compounds, respectively. The proposed method had been successfully applied for the determination of arsenic and selenium species in the certified reference materials DORM-3, water, urine, and fish samples.

Quantification of methylated selenium, sulfur, and arsenic in the environment

Biomethylation and volatilization of trace elements may contribute to their redistribution in the environment. However, quantification of volatile, methylated species in the environment is complicated by a lack of straightforward and field-deployable air sampling methods that preserve element speciation. This paper presents a robust and versatile gas trapping method for the simultaneous preconcentration of volatile selenium (Se), sulfur (S), and arsenic (As) species. Using HPLC-HR-ICP-MS and ESI-MS/MS analyses, we demonstrate that volatile Se and S species efficiently transform into specific non-volatile compounds during trapping, which enables the deduction of the original gaseous speciation. With minor adaptations, the presented HPLC-HR-ICP-MS method also allows for the quantification of 13 non-volatile methylated species and oxyanions of Se, S, and As in natural waters. Application of these methods in a peatland indicated that, at the selected sites, fluxes varied between 190–210 ng Se·m⁻²·d⁻¹, 90–270 ng As·m⁻²·d⁻¹, and 4–14 µg S·m⁻²·d⁻¹, and contained at least 70% methylated Se and S species. In the surface water, methylated species were particularly abundant for As (>50% of total As). Our results indicate that methylation plays a significant role in the biogeochemical cycles of these elements.