Rapid and sensitive determination of aminoglycoside antibiotics in water samples using a strong cation-exchange chromatography non-derivatisation method with chemiluminescence detection

A Status Update on Pharmaceutical Analytical Methods of Aminoglycoside Antibiotic: Amikacin

Amikacin (AMK) is one of the commonly used aminoglycoside antibiotics, introduced for clinical use in patients suffering from bacterial infections especially life-threatening gram-negative infections. Due to lack of chromophore in the molecule, the detection of AMK during analysis is a challenge. Thus, pre and post-column derivatization techniques are generally used for AMK estimation. This review focuses on different analytical methods used for detection and quantification of AMK in pure or fixed dose combination pharmaceutical formulations and biological samples. Various reported methods described in the literature include high-performance liquid chromatography techniques, pulsed electrochemical detection techniques, Chemiluminescence techniques, Capillary electrophoresis and immunological methods. High-performance-liquid-chromatography based methods with UV/Vis spectrophotometric, fluorescence and mass spectrometric detection are the most prevailing methods employed for the analysis of AMK. This review could be of significant importance in the area of future AMK analytical method development studies.

Rapid and sensitive determination of neomycin and kanamycin in measles, mumps, and rubella vaccine via high-performance liquid chromatography-tandem mass spectrometry using modified super-paramagnetic Fe3O4 nanospheres

A simple magnetic dispersive solid-phase extraction (MDSPE) methodology based on mesoporous Fe₃O₄@ succinic acid nanospheres and high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) has been developed to determine kanamycin (KNM) and neomycin (NEO) contents in Measles, Mumps, and Rubella (MMR) vaccine products. The monodispersed mesoporous Fe₃O₄ nanospheres with self-assembled carboxyl terminated shell have been prepared via a simple solvothermal method. These as-synthesized mesoporous Fe₃O₄ nanospheres showed a high magnetic saturation value (M_s = 46 emu g^-1) and large specific surface area (111.12 m² g^-1) which made them potential candidates as sorbents in magnetic solid-phase extraction. The adsorption experimental data fitted well with the Freundlich-Langmuir isotherm and followed a pseudo-second-order kinetic model. Moreover influential parameters on extraction efficiency were investigated and optimized. Under optimal conditions, the limits of detection for KNM and NEO were 1.0 and 0.1 ng mL^-1, respectively. Recovery assessments using real samples exhibited recoveries in the range of 96.0 ± 4.3 to 101.5 ± 7.1 %, with relative standard deviations of <10.7% (for intra- day) and <14.6% (for inter- day). The proposed method was successfully applied for different spiked and un-spiked MMR vaccine samples. The presented extraction method provides a fast, selective, robust and practical platform for the detection of KNM and NEO in MMR vaccine samples.

Specific fluorometric assay for direct determination of amikacin by molecularly imprinting polymer on high fluorescent g-C3N4 quantum dots

Here, a specific and reliable fluorometric method for the rapid determination of amikacin was developed based on the molecularly imprinting polymer (MIP) capped g-C₃N₄ quantum dots (QDs). g-C₃N₄ QDs were obtained by facile and one-spot ethanol-thermal treatment of bulk g-C₃N₄ powder and showed a high yield fluorescence emission under UV irradiation. The MIP layer was also created on the surface on QDs, via usual self-assembly process of 3-aminopropyl triethoxysilane (APTES) functional monomers and tetraethyl ortho-silicate (TEOS) cross linker in the presence of amikacin as template molecules. The synthesized MIP-QDs composite showed an improved tendency toward the amikacin molecules. In this state, amikacin molecules located adjacent to the g-C₃N₄ QDs caused a remarkable quenching effect on the fluorescence emission intensity of QDs. This effect has a linear relationship with amikacin concentration and so, formed the basis of a selective assay to recognize amikacin. Under optimized experimental conditions, a linear calibration graph was obtained as the quenched emission and amikacin concentration, in the range of 3-400 ng mL^-1 (4.4-585.1 nM) with a detection limit of 1.2 ng mL^-1 (1.8 nM). The high selectivity of MIP sites as well as individual fluorescence properties of g-C₃N₄ QDs offers a high specific and sensitive monitoring method for drug detection. The method was acceptably applied for the measurement of amikacin in biological samples.

Development and validation of an HPLC method for determination of Amikacin in water samples by solid phase extraction and pre-column derivatization

This work presents a rapid and sensitive high performance liquid chromatography method for the determination of amikacin in water samples with solid phase extraction and pre-column derivatization. Amikacin residue was extracted from water samples with solid phase extraction cartridge. Then the extraction solution was derivatized with 4-chloro-3,5-dinitrobenzotrifluoride in the presence of triethylamine at 70°C in 20 min. The amikacin derivative was separated on a C18 column and detected by application of UV detection at 238 nm. The limit of detection is 0.2 μg/L with a signal-to-noise ratio of 3 and linearity is established over the concentration range from 0 to 500.0 μg/L. Recoveries of the amikacin in three types of water samples are from 87.5 % to 99.6 % and RSDs are 2.1 %-4.5 %. This method can be used for the quantification of amikacin residues in water samples.

Monitoring the presence of 13 active compounds in surface water collected from rural areas in northwestern Spain

Drug residues are considered environmental contaminants, and their occurrence has recently become a matter of concern. Analytical methods and monitoring systems are therefore required to control the continuous input of these drug residues into the environment. This article presents a suitable HPLC-ESI-MS/MS method for the simultaneous extraction, detection and quantification of residues of 13 drugs (antimicrobials, glucocorticosteroids, anti-inflammatories, anti-hypertensives, anti-cancer drugs and triphenylmethane dyes) in surface water. A monitoring study with 549 water samples was carried out in northwestern Spain to detect the presence of drug residues over two sampling periods during 2010, 2011 and 2012. Samples were collected from rural areas with and without farming activity and from urban areas. The 13 analytes were detected, and 18% of the samples collected showed positive results for the presence of at least one analyte. More collection sites were located in rural areas than in urban areas. However, more positive samples with higher concentrations and a larger number of analytes were detected in samples collected from sites located after the discharge of a WWTP. Results indicated that the WWTPs seems to act as a concentration point. Positive samples were also detected at a site located near a drinking water treatment plant.

Luminol-based chemiluminescent signals: clinical and non-clinical application and future uses

Chemiluminescence (CL) is an important method for quantification and analysis of various macromolecules. A wide range of CL agents such as luminol, hydrogen peroxide, fluorescein, dioxetanes and derivatives of oxalate, and acridinium dyes are used according to their biological specificity and utility. This review describes the application of luminol chemiluminescence (LCL) in forensic, biomedical, and clinical sciences. LCL is a very useful detection method due to its selectivity, simplicity, low cost, and high sensitivity. LCL has a dynamic range of applications, including quantification and detection of macro and micromolecules such as proteins, carbohydrates, DNA, and RNA. Luminol-based methods are used in environmental monitoring as biosensors, in the pharmaceutical industry for cellular localization and as biological tracers, and in reporter gene-based assays and several other immunoassays. Here, we also provide information about different compounds that may enhance or inhibit the LCL along with the effect of pH and concentration on LCL. This review covers most of the significant information related to the applications of luminol in different fields.

Detection of veterinary drug residues in surface waters collected nearby farming areas in Galicia, North of Spain

The occurrence of pharmaceuticals in the aquatic environment has become a matter of concern in the last decade due to potential risks posed to non-target organisms and the potential for unintended human exposure via food chain. This concern has been driven by a high detection frequency for drugs in environmental samples; these substances are produced in large quantities and are used in both veterinary and human medicine, leading to deposition and potential effects in the environment. However, few studies have focused on the presence of pharmaceuticals in rural areas associated with farming activities in comparison to urban areas. The aim of this study is to investigate the occurrence of pharmaceutically active compounds in surface waters collected from urban and rural areas in northwestern Spain. A monitoring study was conducted with 312 river water samples analysed by high-performance liquid chromatography coupled to tandem mass spectrometry. Positive detection of pharmaceuticals was made for 51 % of the samples. Decoquinate, sulfamethazine, sulfamethoxypyridazine and trimethoprim were the drugs most frequently detected, being present in more than 10 % of the samples. The sampling sites located downstream of the discharge points for wastewater treatment plants yielded the highest number of positive samples, 13 % of the positive samples were detected in these sites and 38 % of the samples collected near the collection point of a drinking water treatment plant were positive.

Antibiotic microbial assay using kinetic-reading microplate system

The aim of this study was to determine the optimal experimental conditions to develop a methodology for microbiological assay of apramycin employing microplate and kinetic reading mode, and to validate the developed method, through evaluation of parameters of selectivity, linearity, linear range, limits of detection and quantification, accuracy and precision. The turbidimetric assay principle is simple: the test solution is added to a suspension of test microorganism in culture media, the mixture is incubated under appropriate conditions and the microbial growth is measured by photometric reading. Microplate with kinetic reading mode employed in antibiotic assay is of considerable interest since it allows reduction of material and analysis time and enables a large number of samples to be analyzed simultaneously, with automated reading and calculating. Established conditions considered the standard-curve of apramycin at concentrations from 5.0 to 35.0 μg mL-1, and tryptic soy broth inoculated with 5% Escherichia coli (ATCC 8739) suspension. Satisfactory results were obtained with 2 hours of incubation. The developed method showed appropriate selectivity, linearity in the range from 5.0 to 35.0 μg mL-1, limits of detection and quantification of 0.1 and 0.4 μg mL-1, respectively, as well as satisfactory accuracy (recuperation = 98.5%) and precision (RSD = 6.0%). Microplate assay combined the characteristics of microbiological (evaluation of antibiotic activity against sensitive test microorganism) and physico-chemical (operationally straightforward and faster results) assays.

Development of a multicommutated flow system with chemiluminometric detection for quantification of gentamicin in pharmaceuticals

A new flow procedure based on multicommutation with chemiluminometric detection was developed to quantify gentamicin sulphate in pharmaceutical formulations. This approach is based on gentamicin's ability to inhibit the chemiluminometric reaction between luminol and hypochlorite in alkaline medium, causing a decrease in the analytical signal. The inhibition of the analytical signal is proportional to the concentration of gentamicin sulphate, within a linear range of 1 to 4 μg mL(-1) with a coefficient variation <3%. A sample throughput of 55 samples h(-1) was obtained. The developed method is sensitive, simple, with low reagent consumption, reproducible, and inexpensive, and when applied to the analysis of pharmaceutical formulations (eye drops and injections) it gave results with RSD between 1.10 and 4.40%.

Determination of penicillin V potassium in pharmaceuticals and spiked human urine by chemiluminescence

A simple and selective method for penicillin V potassium (PVK) determination by chemiluminescence (CL) was developed. Oxidation of PVK by alkaline hydrogen peroxide produces CL, which is greatly enhanced by N, N-dimethyl formamide (DMF) and N-cetyl-N,N,N-trimethylammonium bromide (CTMAB). Optimum conditions were established using luminometry. There is a linear relationship between the chemiluminescent peak height and the amount of PVK within the range 0.5–129.5 mg L−1, with a detection limit of 0.2 mg L−1. The coefficient of variation was 1.2% for 40 mg L−1 PVK solution (n = 7). The method is very simple, has high sensitivity and good selectivity, and is usable for process control. It was successfully utilized for the determination of PVK in pharmaceuticals and spiked human urine.

A generic method for the quantitative analysis of aminoglycosides (and spectinomycin) in animal tissue using methylated internal standards and liquid chromatography tandem mass spectrometry

Aminoglycosides (AGs) are a large and diverse group of antibiotics. Although AGs may cause side effects of nephrotoxicity and ototoxicity, they are still occasionally being used for the treatment of serious infections. In this study the development of a method is described for the quantitative determination and confirmation of seven aminoglycosides (and relevant isomers) and spectinomycin in animal tissues. The extraction was based on an extraction followed by a concentration and clean-up step using weak cation exchange solid phase extraction. The separation was performed by ion-pair liquid chromatography on a C(18) column followed by mass spectrometric detection. The method was validated according to the EU requirements for a quantitative confirmatory method. Permethylated aminoglycosides (in-house synthesised internal standards) were used for accurate quantification. The accuracy of the analyses of AGs in kidney ranged from 94 to 111%, intra-day precision ranged between 2.5 and 7.4% (R.S.D.(r)) and inter-day precision ranged between 2.2 and 17.3% (R.S.D.(RL), n=21, MRL level). Accuracy (muscle tissue) varied from 83 to 128% with an intra-day precision between 2.2 and 17.3% (R.S.D.(r), n=7, MRL level). From the results it was concluded that the method was able to monitor MRL levels which ranged from 750 to 20,000 microgkg(-1) for kidney and from 50 to 10,000 microgkg(-1) for muscle tissue.

Use of SDS micelles for improving sensitivity, resolution, and speed in the analysis of β-lactam antibiotics in environmental waters by SPE and CE

This study dealt with the potential of MEKC with LIF detection involving derivatization with sulfoindocyanine succinimidyl ester (Cy5) for the separation and determination of beta-lactam antibiotics (ampicillin, amoxicillin, cephradine, and cephalexin) in environmental water samples. Water samples of 50 mL were enriched by SPE by passage through a weak base-cation Amberlite(R) IRA-93 exchange column. SDS micelles play important roles in the whole analytical process by improving the yield (sensitivity) and the kinetics of the labeling reaction, the elution of the retained antibiotics from the SPE preconcentration system and the electrophoretic resolution of their Cy5-derivatives. The optimum procedure includes a derivatization step of the antibiotics at 25 degrees C for 10 min and direct injection for MEKC analysis, which is conducted within about 15 min using 15 mM SDS in the running buffer (35 mM sodium borate at pH 9.3). LODs from 30 to 45 ng/L and RSDs (within-day precision) from 3.5 to 5.9% were obtained for the antibiotics in water samples with average recoveries ranging from 96.4 to 99.4%. These results indicate that the method proposed is a straightforward and sensitive tool for the determination of these antibiotics in environmental water samples providing similar quantitative results to those using more expensive equipment like LC-electrospray MS/MS.

Determination of amikacin in body fluid by high-performance liquid-chromatography with chemiluminescence detection

A simple and sensitive method was developed for the quantification of amikacin in human plasma and urine samples. The method involves centrifugation of body fluid plasma after dilution with an ethanol/sodium carbonate mixture, and then an aliquot of the supernatant is directly injected into the chromatograph. After separation on a reversed-phase C18 column (runtime 20 min), aminoglycoside is detected on the basis of its complex formation reaction with Cu(II), the catalyst of the luminol/hydrogen peroxide chemiluminescence system. Using a volume of 500 microl biological sample, linearity is established over the concentration range 0.15-2.0 microg/ml and the limit of detection (LOD) is ca. 50 microg/l in plasma or urine. The intra-day and inter-day precision (measured by relative standard deviation, R.S.D.%) are always less than 9%, and relative recoveries are found to be over 92%.