Ultrasound-assisted emulsification–microextraction of emergent contaminants and pesticides in environmental waters

A closer look at how the dispersive liquid-liquid microextraction method works. Investigation of the effect of solvent mixture composition on the quality and stability of the cloudy state

The dispersive liquid-liquid microextraction (DLLME) is one of the most popular miniaturized extraction procedures. In this paper, the degree of dispersion and dispersion stability were studied with the aim to assess the correlations of these parameters with efficiency for the selected analytical application. The dependence between the degree of dispersion (cloudy state quality) and its stability obtained by various emulsification procedures, such as solvent-assisted emulsification (using various dispersive solvents) and mechanical emulsification (using auxiliary energies), is investigated and discussed. It was found out that the degree of dispersion depends on the type of emulsification procedure and decreases in the series: solvent-assisted (SA-) = ultrasound-assisted (UA-) > air-assisted (AA-) > vortex-assisted (VA-) emulsification. The emulsion stability depends on the degree of dispersion and there were 1810 and 2070 s for the most effective emulsification procedures, such us solvent-assisted and ultrasound-assisted emulsification, respectively. A comparison between the sensitivity of the analytical methods (using spectrophotometric determination of the anionic surfactants) and the degree of dispersion have been made. The sensitivity of the methods was ranked as follows: DLLME > UA-LLME > VA-LLME > AA-LLME.

The determination of thallium in the environment: A review of conventional and advanced techniques and applications

Thallium (Tl) is a potential toxicity element that poses significant ecological and environmental risks. Recently, a substantial amount of Tl has been released into the environment through natural and human activities, which attracts increasing attention. The determination of this hazardous and trace element is crucial for controlling its pollution. This article summarizes the advancement and progress in optimizing Tl detection techniques, including atomic absorption spectroscopy (AAS), voltammetry, inductively coupled plasma (ICP)-based methods, spectrophotometry, and X-ray-based methods. Additionally, it introduces sampling and pretreatment methods such as diffusive gradients in thin films (DGT), liquid-liquid extraction, solid phase extraction, and cloud point extraction. Among these techniques, ICP-mass spectrometry (MS) is the preferred choice for Tl detection due to its high precision in determining Tl as well as its species and isotopic composition. Meanwhile, some new materials and agents are employed in detection. The application of novel work electrode materials and chromogenic agents is discussed. Emphasis is placed on reducing solvent consumption and utilizing pretreatment techniques such as ultrasound-assisted processes and functionalized magnetic particles. Most detection is performed in aqueous matrices, while X-ray-based methods applied to solid phases are summarized which provide non-destructive analysis. This work improves the understanding of Tl determination technology while serving as a valuable resource for researchers seeking appropriate analytical techniques.

Fabrication of Eco-Friendly Hydrolyzed Ethylene-Maleic Anhydride Copolymer-Avermectin Nanoemulsion with High Stability, Adhesion Property, pH, and Temperature-Responsive Releasing Behaviors

In this study, novel amphiphilic polymer emulsifiers for avermectin (Avm) were synthesized facilely via the hydrolysis of ethylene-maleic anhydride copolymer (EMA) with different agents, and their structures were confirmed by various techniques. Then, water-based Avm-nanoemulsions were fabricated with the emulsifiers via phase inversion emulsification process, and superior emulsifier was selected via the emulsification effects. Using the superior emulsifier, an optimal Avm-nanoemulsion (defined as Avm@HEMA) with satisfying particle size of 156.8 ± 4.9 nm, encapsulation efficiency (EE) of 69.72 ± 4.01% and drug loading capacity (DLC) of 54.93 ± 1.12% was constructed based on response surface methodology (RSM). Owing to the emulsifier, the Avm@HEMA showed a series of advantages, including high stability, ultraviolet resistance, low surface tension, good spreading and high affinity to different leaves. Additionally, compared to pure Avm and Avm-emulsifiable concentrate (Avm-EC), Avm@HEMA displayed a controlled releasing feature. The encapsulated Avm was released quite slowly at normal conditions (pH 7.0, 25 °C or 15 °C) but could be released at an accelerated rate in weak acid (pH 5.5) or weak alkali (pH 8.5) media or at high temperature (40 °C). The drug releasing profiles of Avm@HEMA fit the Korsmeyer-Peppas model quite well at pH 7.0 and 25 °C (controlled by Fickian diffusion) and at pH 7.0 and 10 °C (controlled by non-Fickian diffusion), while it fits the logistic model under other conditions (pH 5.5 and 25 °C, pH 8.5 and 25 °C, pH 7.0 and 40 °C).

Implementation of simple and effective fine droplet formation-based spray-assisted liquid phase microextraction for the simultaneous determination of twenty-nine endocrine disruptor compounds and pesticides in rock, soil, water, moss, and feces samples from antarctica using gas chromatography-mass spectrometry

This study established the simultaneous determination of the selected endocrine-disrupting compounds (EDCs) and pesticides in rock, soil, water, moss, and feces samples collected from the Antarctic region. The spray-assisted droplet formation-based liquid phase microextraction (SADF-LPME) coupled to GC-MS system was developed and validated for the screening and monitoring of 29 selected EDCs and pesticides. Binary solvent system, 1:1 (v/v) dichlormethane: 1,2-dichloroethane mixture was employed as an extraction solvent and sprayed onto sample or standard solutions using a straightforward and practical spray apparatus. The factors affecting the extraction process such as extraction solvent type and ratio, extraction solvent volume (spray repetition), vortexing period, and sample pH were properly optimized. Analytical figures of the merit of the method were recorded under the optimal extraction/chromatographic conditions. The LOD, LOQ, and enhancement factor were in the range of 1.0 to 6.6 ng/g, 3.2 to 22.1 ng/g, and 3.7 to 158.9, respectively. The method demonstrated a good linear working range for all the selected analytes with proper coefficients of determination. The usability and reliability of the microextraction strategy was confirmed using seawater, moss, and soil samples, and the %recoveries were within an acceptable range (> 70%) for all examined samples. The environmental samples collected from the Horseshoe and Faure Islands of the Antarctica region were analyzed to assess the potential pollution of EDCs and pesticides. This method has the potential to be employed for the analysis of EDCs in routine analytical laboratories and for controlling and screening the organic pollutant content of different environmental samples.

Diuretics in Different Samples: Update on the Pretreatment and Analysis Techniques

Diuretics are drugs that promote the excretion of water and electrolytes in the body and produce diuretic effects. Clinically, they are often used in the treatment of edema caused by various reasons and hypertension. In sports, diuretics are banned by the World Anti-Doping Agency (WADA). Therefore, in order to monitor blood drug concentration, identify drug quality and maintain the fairness of sports competition, accurate, rapid, highly selective and sensitive detection methods are essential. This review provides a comprehensive summary of the pretreatment and detection of diuretics in various samples since 2015. Commonly used techniques to extract diuretics include liquid-liquid extraction, liquid-phase microextraction, solid-phase extraction, solid-phase microextraction, among others. Determination methods include methods based on liquid chromatography, fluorescent spectroscopy, electrochemical sensor method, capillary electrophoresis and so on. The advantages and disadvantages of various pretreatment and analytical techniques are elaborated. In addition, future development prospects of these techniques are discussed.

Emerging contaminants migration from pipes used in drinking water distribution systems: a review of the scientific literature

Migration of emerging contaminants (ECs) from pipes into water is a global concern due to potential human health effects. Nevertheless, a review of migration ECs from pipes into water distribution systems is presently lacking. This paper reviews, the reported occurrence migration of ECs from pipes into water distribution systems in the world. Furthermore, the results related to ECs migration from pipes into water distribution systems, their probable sources, and their hazards are discussed. The present manuscript considered the existing reports on migration of five main categories of ECs including microplastics (MPs), bisphenol A (BPA), phthalates, nonylphenol (NP), perfluoroalkyl, and polyfluoroalkyl substances (PFAS) from distribution network into tap water. A focus on tap water in published literature suggests that pipes type used had an important role on levels of ECs migration in water during transport and storage of water. For comparison, tap drinking water in contact with polymer pipes had the highest mean concentrations of reviewed contaminants. Polyvinyl chloride (PVC), polyamide (PA), polypropylene (PP), polyethylene (PE), and polyethylene terephthalate (PET) were the most frequently detected types of microplastics (MPs) in tap water. Based on the risk assessment analysis of ECs, levels of perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), perfluorodecanoic acid (PFDA), perfluorohexane sulfonate (PFHxS), and perfluorooctane sulfonate (PFOS) were above 1, indicating a potential non-carcinogenic health risk to consumers. Finally, there are still scientific gaps on occurrence and migration of ECs from pipes used in distribution systems, and this needs more in-depth studies to evaluate their exposure hazards on human health.

Gone with the flow - Assessment of personal care products in Portuguese rivers

Although there are several works in the literature that study the presence of pharmaceuticals and personal care products (PPCPs) in surface waters, the vast majority focus their attention on pharmaceuticals and little information is found about personal care products (PCPs). Therefore, this study focused, for the first time, on the monitoring of five classes of PCPs - fragrance allergens, synthetic musks, phthalates, antioxidants, and ultraviolet-filters - in the surface water of four small-size typically pollution-impacted Portuguese rivers (Ave, Leça, Antuã and Cértima). A solid-phase microextraction (SPME) followed by gas chromatography - tandem mass spectrometry (GC-MS/MS) protocol was employed to analyse surface water samples collected in two seasonal campaigns - summer and winter (34 samples per season). A total of 22 out of 37 target PCPs were detected concomitantly at least once in one sampling point, being the most frequently detected α-isomethyl ionone, galaxolide, tonalide and cashmeran. The highest concentrations were confirmed for diethylhexyl phthalate (610.6 ng L^-1), galaxolide (379.2 ng L^-1), geraniol (290.9 ng L^-1), linalool (271.2 ng L^-1), benzophenone-3 (254.1 ng L^-1) and citronellol (200.2 ng L^-1). Leça River, traversing the more densely urban and industrialized area, had the highest levels of contaminants, which were also found in the sampling points located downstream of wastewater treatment plants discharge points. In general, higher levels were detected in summer, when the river flows are lower. Hazard quotients were determined and octocrylene, tonalide, and geraniol presented values above 1 in some sampling sites, which may indicate an ecotoxicological risk to the aquatic environment. The results presented suggest that these three PCPs should be included as priority pollutants in environmental monitoring schemes in surface waters, due to their high detection, persistence, and potential adverse effects.

In-syringe dispersive liquid-liquid microextraction

Dispersive liquid-liquid microextraction (DLLME) has recently been widely used in the separation and preconcentration of various chemical species. Among the various approaches using DLLME are systems that use a syringe as an extraction environment. In this review, details of some methods that use this approach are presented. The ways to promote dispersion, analytical characteristics, and the advantages and disadvantages of the methods, among other aspects, are discussed critically. Finally, some trends in the use of in-syringe microextraction systems are described.

Occurrence of Fungicides in Vineyard and the Surrounding Environment

Seventeen fungicides were determined in different matrices from vineyard areas, including vine leaves, soils, grapes and water, using gas chromatography coupled to tandem mass spectrometry (GC-MS/MS). For leaf analysis, ultrasound-assisted extraction (UAE) was performed evaluating different solvents. UAE was compared with other extraction techniques such as vortex extraction (VE) and matrix solid-phase dispersion (MSPD). The performance of the UAE method was demonstrated on vine leaf samples and on other types of samples such as tea leaves, underlining its general suitability for leaf crops. As regards other matrices, soils were analyzed by UAE and microwave-assisted extraction (MAE), grapes by UAE and waters by SPE using cork as the sorbent. The proposed method was applied to 17 grape leaf samples in which 14 of the target fungicides were detected at concentrations up to 1000 μg g⁻¹. Furthermore, the diffusion and transport of fungicides was demonstrated not only in crops but also in environmental matrices.

Techniques for the detection and quantification of emerging contaminants

In recent years, the diverse industrial practices and human inputs widely disseminated emerging contaminants (ECs) throughout environmental matrices, which is of great concern. Even at low concentrations, ECs pose major ecological problems and threaten human health and the environment’s biota. Consequently, people’s interest and concerns on the widespread dissemination of environmentally connected ECs of great concern as developed due to their scientific understanding, technical innovation, and socioeconomic awareness. Increased detection of contaminants may occur from climatic, socioeconomic, and demographic changes and the growing sensitivity of analytical techniques. Hence, this article reviews the determination of ECs in ecological specimens, from aquatic setup (river water, marine water, and wastewater), sludge, soil, sediment, and air. Sample collection and the quality measures are summarized. The preparation of samples, including extraction and cleanup and the subsequent instrumental analysis of ECs, are all covered. Traditional and recent extraction and cleanup applications to analyze ECs in samples are reviewed here in this paper. The detection and quantification of ECs using gas chromatography (GC) and liquid chromatography (LC) linked with various detectors, particularly mass spectrometry (MS), is also summarized and explored, as are other possible techniques. This study aims to give readers a more excellent knowledge of how new and improved approaches are being developed and serve as a resource for researchers looking for the best method for detecting ECs in their studies.

Recent Advances in Sample Preparation for Cosmetics and Personal Care Products Analysis

The use of cosmetics and personal care products is increasing worldwide. Their high matrix complexity, together with the wide range of products currently marketed under different forms imply a challenge for their analysis, most of them requiring a sample pre-treatment step before analysis. Classical sample preparation methodologies involve large amounts of organic solvents as well as multiple steps resulting in large time consumption. Therefore, in recent years, the trends have been moved towards the development of simple, sustainable, and environmentally friendly methodologies in two ways: (i) the miniaturization of conventional procedures allowing a reduction in the consumption of solvents and reagents; and (ii) the development and application of sorbent- and liquid-based microextraction technologies to obtain a high analyte enrichment, avoiding or significantly reducing the use of organic solvents. This review provides an overview of analytical methodology during the last ten years, placing special emphasis on sample preparation to analyse cosmetics and personal care products. The use of liquid–liquid and solid–liquid extraction (LLE, SLE), ultrasound-assisted extraction (UAE), solid-phase extraction (SPE), pressurized liquid extraction (PLE), matrix solid-phase extraction (MSPD), and liquid- and sorbent-based microextraction techniques will be reviewed. The most recent advances and future trends including the development of new materials and green solvents will be also addressed.

Simultaneous determination of low molecule benzotriazoles and benzotriazole UV stabilizers in wastewater by ultrasound-assisted emulsification microextraction followed by GC-MS detection

A rapid, sensitive, economically and ecologically friendly method based on one-step ultrasound-assisted emulsification microextraction and in situ derivatization followed by gas chromatography-mass spectrometry for simultaneous determination of low molecular benzotriazoles and benzotriazole-based ultraviolet filters was developed. The optimized method allows quantification of benzotriazole, 4-methylbenzotriazole, 5-methylbenzotriazole; 5-chlorobenzotriazole, 2-(2'-hydroxy-3'-tert-butyl-5'-methylphenyl)-5-chlorobenzortriazole and 2-(2'-hydroxy-5'-(1,1,3,3-tetramethylbutyl)phenyl)benzotriazole in municipal and industrial (dairy) wastewater. The method was validated using real influent and effluent wastewater and samples at various stages of the purification process. Relative recoveries obtained using wastewater as sample matrix were between 77 and 137%, method limits of detection from 0.001 to 0.035 µg/L, method limits of quantification from 0.003 to 0.116 µg/L, the repeatability expressed by the coefficient of variation did not exceed 12%. The use of the method for the determination of tested compounds in municipal and industrial wastewater showed their presence in most of the tested samples, in concentrations from LoD to 6.110 µg/L. The conducted studies of samples from municipal wastewater treatment plant located in north-east Poland showed that the effectiveness of benzotriazole removal by this plant wasfrom 29 to 84%. The load of tested compounds released into the environment by this facility ranges from 2 to 269 mg/day/1000 inhabitants.

Polydopamine-coated magnetic nanoparticles for the determination of nitro musks in environmental water samples by stir bar sorptive-dispersive microextraction

Magnetic-based microextraction approaches have gained popularity in recent years due to the magnetic properties of the extraction phases allowing to handle them easier and more efficiently. This work describes a magnetic-based analytical method for the determination of the family of nitro musks in environmental water samples. These compounds have been of great concern due to their environmental impacts and potential health effects. The method is based on stir bar sorptive-dispersive microextraction (SBSDME) as extraction approach, prior to thermal desorption coupled to gas chromatography-mass spectrometry analysis (TD-GC-MS). For this purpose, polydopamine-coated cobalt ferrite magnetic nanoparticles (CoFe₂O₄@PDA) were used as extraction material. The main parameters involved in the extraction procedure (i.e., sorbent amount, extraction time and ionic strength) as well as in the thermal desorption step (i.e., temperature and desorption time) were evaluated in order to obtain the highest sensitivity. Under the selected conditions, the method showed good linearity, limits of detection and quantification in the low ng L^-1 range, intra- and inter-day repeatability with RSD <15%, and high enrichment factors (178-640). Finally, the method was applied to four environmental water samples of different origin. Relative recovery values ranging from 91 to 120% highlighted that the matrices under consideration do not affect the extraction process. This work constitutes the first time in which nitro musks compounds were selectively extracted by taking advantage the high potential that magnetic-based microextraction techniques offer, specially SBSDME.

Deep eutectic solvent-based ultrasound-assisted emulsification microextraction for the rapid determination of benzotriazole and benzothiazole derivatives in surface water samples

This work describes a simple and environmental-friendly method for the simultaneous determination of five benzotriazole derivatives (BTRs) and four benzothiazole derivatives (BTs) that are frequently found in surface water. The target analytes were efficiently extracted from water samples using a "green" deep eutectic solvent (DES) as the extraction solvent based- ultrasound-assisted emulsification microextraction (DES-USAEME), and their determination were performed by ultrahigh-performance liquid chromatography and electrospray ionization (+)-quadrupole time-of-flight mass spectrometry (UHPLC-ESI(+)-QToF-MS). The DES was composed of a mixture of choline chloride and phenol (molar ratio 1:2). The DES-USAEME factors were optimized by a Box-Behnken Design coupled response surface methodology. The developed method was validated, providing limits of quantitation (LOQs; 02 μg L^-1), high precisions (1-8%), and satisfactory mean spiked recoveries (72-104 %). Relatively high total concentrations of the target analytes were found in samples collected from a reservoir (47.2-101.3 μg L^-1), which may have been released from tire-wear particles and scrap tires from buses and old tires that were strung alongside the shuttle boats to prevent the boats from coming into contact with each other or from impacting against the dock during docking. This is the first study on the occurrence of BTRs and BTs in reservoir samples.

Hydrophobic borneol-based natural deep eutectic solvents as a green extraction media for air-assisted liquid-liquid micro-extraction of warfarin in biological samples

In the present study, a new generation of water-immiscible natural deep eutectic solvents (DESs) was synthesized using borneol as a hydrogen-bonding acceptor and decanoic acid, oleic acid, and thymol as a hydrogen-bonding donor in different molar ratios. These green hydrophobic solvents which are chemically stable in aqueous solutions were used as extraction solvents for isolation and pre-concentration of warfarin in biological samples. In this method, fine droplets of DESs were dispersed into the sample solution by using the air-assisted liquid-liquid micro-extraction method to accelerate the cloudy emulsion system formation and increase the mass transfer of the analyte to the DES-rich phase. The borneol based deep eutectic solvent is a worthy generation of the extraction solvents in the ALLME method due to low-cost and less toxicity. A Plackett-Burman design was utilized for screening the experimental parameters. The effective parameters were then optimized by Box-Behnken design (BBD). Optimized extraction conditions were pH of sample solution of 3.9, number of aspiration/dispersion cycles of 15, the volume of DES of 60 μL, and rate and time of centrifuge of 6000 rpm and 10 min, respectively. Under the optimized conditions, the developed NADES-ALLME method exhibited a wide linear range of 5-500 µg L ^- 1 for plasma and urine samples with satisfactory recoveries above 88.80%. Limit of detections (LODs) and Limit of quantifications (LOQs) of warfarin were in the ranges of 0.5-2.7 and 1.65-8.91, respectively. The enrichment factors were obtained in the range of 148-164 and precisions were lower than 5.87%. Finally, the proposed method was successfully employed for the analysis of warfarin in human urine and plasma samples.

Worldwide bottled water occurrence of emerging contaminants: A review of the recent scientific literature

Contaminants of emerging concern (CECs) have recently been detected in bottled water and have brought about discussions on possible risks for human health. However, a systematic review of CECs in bottled water is currently lacking due to the relatively new introduction and/or detection of these pollutants. Hence, this paper reviews the existing studies on the presence of six major groups of emerging contaminants including microplastics (MPs), pharmaceuticals and personal care products (PPCPs), bisphenol A (BPA), phthalates, alkylphenols (APs), and perfluoroalkyl and polyfluoroalkyl substances (PFASs) in bottled water from different countries. Also, the findings related to CECs' levels, their possible sources, and their risks are summarized. The gathered data indicate that MPs within the size range of 1-5 μm are the most predominant and potentially toxic classes of MPs in bottled water. In addition, PPCPs, PFASs, APs, and BPA occur in concentration levels of ng/L, while phthalates occur in the μg/L level in bottled water. The bottle type plays an important role in the contamination level. As expected, water in plastic bottles with plastic caps is more polluted than in glass bottles. However, other sources of contamination such as contact materials during cleaning, bottling, and storage are not negligible. Based on the gathered data in this review, the CEC levels except for MPs (no threshold values) in bottled water of most countries do not raise a safety concern for the human. However, the occurrence of individual CECs and their association in bottled water need more accurate data to understand their own/synergistic effects on human health.

Liquid phase microextraction techniques combined with chromatography analysis: a review

Sample pretreatment is the first and the most important step of an analytical procedure. In routine analysis, liquid–liquid microextraction (LLE) is the most widely used sample pre-treatment technique, whose goal is to isolate the target analytes, provide enrichment, with cleanup to lower the chemical noise, and enhance the signal. The use of extensive volumes of hazardous organic solvents and production of large amounts of waste make LLE procedures unsuitable for modern, highly automated laboratories, expensive, and environmentally unfriendly. In the past two decades, liquid-phase microextraction (LPME) was introduced to overcome these drawbacks. Thanks to the need of only a few microliters of extraction solvent, LPME techniques have been widely adopted by the scientific community. The aim of this review is to report on the state-of-the-art LPME techniques used in gas and liquid chromatography. Attention was paid to the classification of the LPME operating modes, to the historical contextualization of LPME applications, and to the advantages of microextraction in methods respecting the value of green analytical chemistry. Technical aspects such as description of methodology selected in method development for routine use, specific variants of LPME developed for complex matrices, derivatization, and enrichment techniques are also discussed.

Detection of C60 in environmental water using dispersive liquid-liquid micro-extraction followed by high-performance liquid chromatography

The wide application of fullerene C₆₀ nanoparticles would inevitably lead to their release into the environment. In order to evaluate the environment risks of C₆₀ and the subsequent effects on ecosystem health, a reliable quantitative methodology of C₆₀ should be established. In this study, a rapid pretreatment method called low-density solvent-based dispersive liquid-liquid micro-extraction (DLLME) combined high-performance liquid chromatography-UV detector (HPLC-UV) was developed to detect C₆₀ in environmental water. In this proposed method, toluene and methanol were chosen as the extraction solvent and the dispersive solvent, respectively. The optimized volume of extraction solvent and dispersive solvent were 100 μL and 10 μL, respectively. And the best shaking time was chosen as 10 min at room temperature for the optimal homogenization procedure for the extraction of C₆₀ in water samples. The enrichment factor of 50 was obtained with 100 μL toluene, and the recoveries of C₆₀ from various environmental samples were in the range of 81.4 ± 5.0-101.4 ± 6.2% at 1.25-5.00 µg/L spiked levels. The detection limits of C₆₀ in tap water, surface water, living sewage and mining waste water were 0.19, 0.29, 0.34 and 0.22 μg/L, respectively. The low detection limit, good linear range and high recoveries of C₆₀ in environmental water indicated that the proposed method could provide an efficient approach for the analysis and tracking of C₆₀ in the environment.

A screen-printed electrode modified with silver nanoparticles and carbon nanofibers in a nafion matrix for ionic liquid-based dispersive liquid-liquid microextraction and voltammetric assay of heterocyclic amine 8-MeIQx in food

An electrochemical method is described for the determination of 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (8-MeIQx) which is a heterocyclic aromatic amine formed in cooked food samples. The method uses a screen-printed carbon nanofiber electrode that is modified with silver nanoparticles (AgNPs) in a Nafion matrix. The surface of the modified electrode was characterized by UV-vis spectrometry, dynamic light scattering, scanning electron microscopy and Raman spectroscopy. The average size of the AgNPs is 14 nm. The modified electrode exhibits good properties in terms of reversibility, fast kinetics of electron transfer, and large electroactive area toward the reduction of 8-MeIQx. Differential pulse voltammetry is the most suitable electrochemical technique for quantification of 8-MeIQx, best at a voltage of -0.21 V (versus Ag reference electrode). The first derivative serves as the analytical signal that increases linearly in the 0.015-40 mg L^-1 8-MeIQx concentration range, with a 5 μg L^-1 detection limit. A dispersive liquid-liquid microextraction procedure assisted via ionic liquid was developed to isolate the analyte from real samples. The whole extraction-preconcentration and voltammetric method allows to determine 30 and 70 μg L^-1 in (spiked) bouillon cube, meat broth, beer and wine, with recoveries in the 93.6-110.4% range. Graphical abstractSchematic presentation for the analysis of aromatic amine 8-MeIQx, resultant compound from cooking meat. Extracted sample solution was placed onto modified electrode surface thus obtaining voltammetric analytical signal. So, quantification atrelevant levels can be performed.

Rapid and Sensitive Analysis of Hormones and Other Emerging Contaminants in Groundwater Using Ultrasound-Assisted Emulsification Microextraction with Solidification of Floating Organic Droplet Followed by GC-MS Detection

Ultrasound-assisted emulsification microextraction with solidification of floating organic droplet (USAEME-SFOD) has been applied to isolate hormones and other emerging contaminants from groundwater samples. Simultaneously with the extraction process, derivatization in the matrix was carried out using acetic anhydride. Quantification of studied organic pollutants was done through gas chromatography mass spectrometry (GC-MS). Hormones included β-estradiol (E2), estrone (E1), and diethylstilbestrol (DES). Other compounds belonged to groups of pharmaceuticals (diclofenac (DIC)), antiseptics (triclosan (TRC)), preservatives (propylparaben (PP) and butylparaben (BP)), sunscreen agents (benzophenone (BPH), and 3-(4-methylbenzylidene)camphor (3MBC)), repellents (N,N-diethyltoluamide (DEET)), industrial chemicals (bisphenol A (BPA), 4-t-octylphenol (4OP), 4-n-nonylphenol (4NP)). A non-toxic and inexpensive 1-undecanol was successfully used as the extraction solvent. Volume of extractant and derivatization agent, ionic strength, and time of extraction were optimized. Very low limits of detection (LoD) ranging from 0.01 to 5.9 ng/L were obtained. Recoveries ranged from 90% to 123%, with relative standard deviation being lower than 17%. The developed procedure was used to determine target compounds in groundwater collected at municipal waste landfills as well as in groundwater from wells distant from sources of pollution.

Microfunnel-filter-based emulsification microextraction followed by gas chromatography for simple determination of organophosphorus pesticides in environmental water samples

A simple and fast method named microfunnel-filter-based emulsification microextraction is introduced for an efficient determination of some organophosphorus pesticides including diazinon, malathion, and chlorpyrifos in the environmental samples including the river, sea, and well water. This method is based upon the dispersion of a low-toxicity organic solvent (dihexyl ether), as the extractant, in a high volume of an aqueous sample solution (45 mL). It is implemented without a centrifugation step, and using a syringe filter and a micro-funnel, the phase separation and transfer of the enriched analytes to the gas chromatograph are simply achieved. By filtration of the extractant phase, a suitable sample clean-up is obtained, and the total extraction time is just a few minutes. The factors influencing the extraction efficiency are optimized, and under the optimal conditions, the proposed method provides a good linearity (in the range of 15-1500 ng/mL (R²  > 0.996). A high enrichment factor is obtained (in the range of 306-342), and the method provides low limits of detection and quantification (in the ranges of 4-8 and 15-25 ng/mL, respectively).