Simultaneous determination of positive and negative pharmaceutical counterions using mixed-mode chromatography coupled with charged aerosol detector

Unified and Versatile Multiplex Platform for Expedited Method Development and Comprehensive Characterization of Therapeutic Peptides

Agile analytical approaches are needed for fast and comprehensive characterization of peptide drug candidates. In this study, a unified and versatile multiplex platform was developed to expedite method development and enable the routine determination of multiple quality attributes simultaneously. The platform integrates the automation of size exclusion chromatography (SEC), reversed phase liquid chromatography coupled to reversed phase liquid chromatography (RPLC-RPLC), and hydrophilic interaction liquid chromatography hyphenated to charged aerosol detection (HILIC-CAD). Various therapeutic peptide constructs, including macrocyclic peptides and disulfide constrained peptides, across different lots were studied. The effect of the mobile phase acetonitrile content on the impurity profiles was systematically studied using two SEC columns. A prototype MaxPeak Premier SEC 125 Å column packed with BEH PEO particles achieved the separation of impurities (>2.0% area), whereas no impurities could be observed with an ACQUITY UPLC Protein BEH SEC 125 Å column packed with BEH diol particles. Comprehensive impurity profiling and expedited method development was performed utilizing RPLC-RPLC. Each peptide was analyzed by a combination of 12 conditions in the second dimension, using four columns with octadecyl, phenyl-hexyl, and cyano bonded phases, and three mobile phases with various solvents, modifiers, and pH compositions. Additionally, a HILIC-CAD method was developed for the quantification of TFA, commonly present in peptide products.

Modelling the pH dependent retention and competitive adsorption of charged and ionizable solutes in mixed-mode and reversed-phase liquid chromatography

This study investigated the influence of pH on the retention of solutes using a mixed-mode column with carboxyl (-COOH) groups acting as weak cation exchanger bonded to the terminal of C18 ligands (C18-WCX column) and a traditional reversed-phase C18 column. First, a model based on electrostatic theory was derived and successfully used to predict the retention of charged solutes (charged, and ionizable) as a function of mobile phase pH on a C18-WCX column. While the Horváth model predicts the pH-dependent retention of ionizable solutes in reversed-phase liquid chromatography (RPLC) solely based on solute ionization, the developed model incorporates the concept of surface potential generated on the surface of the stationary phase and its variation with pH. To comprehensively understand the adsorption process, adsorption isotherms for these solutes were individually acquired on the C18-WCX and reversed-phase C18 columns. The adsorption isotherms followed the Langmuir model for the uncharged solute and the electrostatically modified Langmuir model for charged solutes. The elution profiles for the single components were calculated from these isotherms using the equilibrium dispersion column model and were found to be in close agreement with the experimental elution profiles. To enable modelling of two-component cases involving charged solute(s), a competitive adsorption isotherm model based on electrostatic theory was derived. This model was later successfully used to calculate the elution profiles of two components for scenarios involving (a) a C18 Column: two charged solutes, (b) a C18 Column: one charged and one uncharged solute, and (c) a C18-WCX Column: two charged solutes. The strong alignment between the experimental and calculated elution profiles in all three scenarios validated the developed competitive adsorption model.

Quantification of residual organic bases in an active pharmaceutical ingredient using mixed-mode chromatography and UV detection

The use of organic bases is ubiquitous in chemical synthesis, yet quantifying these compounds with traditional HPLC methodologies is often hampered by poor peak shape, low retention, and limited UV absorption. When employed in the manufacture of an active pharmaceutical ingredient (API), these compounds must be controlled to levels that are safe for human consumption, requiring robust analytical methods with sufficiently low quantification limits. This work describes the development of an HPLC method for the quantification of imidazole and 1,8-Diazabicyclo[5.4.0]undec‑7-ene (DBU) in an API using mixed-mode chromatography. Through control of the pH and organic modifier gradients, the retention of the basic analytes and API can be tuned independently to achieve desirable retention and sensitivity for each compound. The resulting HPLC method exhibits good performance in linearity, accuracy, sensitivity, specificity, and solution stability. Notably, these conditions avoid more complex detection modalities, such as mass spectrometry, while maintaining a system pressure below 400 bar, making the method compatible with a broad range of instruments. This approach to mixed-mode chromatography method development could be extended to different organic bases in the presence of complex molecules to fit the needs of projects in an academic or industrial environment.

Determination of inorganic ions and carbohydrates in cardioplegia and nephroplegia solutions by ion chromatography

In this study, methods for analyzing inorganic ions and carbohydrates in cardioplegia and nephroplegia solutions were developed and validated using ion chromatography with both conductivity and pulsed amperometric detection. The inorganic ions such as sodium, potassium, and calcium were separated by a cation-exchange column with 27 mM methanesulfonic acid as mobile phase at 0.5 mL/min. The anion (chloride) and carbohydrates (mannitol and glucose) were analyzed by an anion-exchange column using a mobile phase of 20 mM sodium hydroxide at 1.0 mL/min. The methods showed a high sensitivity for all analytes, with quantification limits from 0.0002 to 0.06 mg/L. Good linearities between the peak areas and concentrations were found for all analytes within the selected concentration range (R2  > 0.999). Relative standard deviation values for repeatability and interday precision were 0.1%-1.0% and 0.7%-1.6%, respectively. The accuracy was validated by determining the percentage recovery, which was between 98.0% and 101.3% for all analytes, indicating good accuracy of the methods. The robustness was verified by using an experimental design. Finally, real samples were analyzed to determine the content of the analytes. All assay values were between 96.8% and 102.5%.

Exploration of the effects of chloride ions on the analysis of polar compounds at low concentrations by hydrophilic interaction liquid chromatography coupled to a charged aerosol detector: Application to tromethamine

In this study, we discuss the origin of the slightly increased response of the charged aerosol detector when low-concentration polar drugs formulated with sodium chloride are analyzed by hydrophilic interaction liquid chromatography coupled to the charged aerosol detector. In the case of tromethamine mixed with saline solutions, we investigated several levels including the mobile phase, sample matrix, and detection. We show that the analysis of the rich-salted sample results in both interactions with the mobile phase modifiers and the stationary phase during the run time. With 150 mM NaCl as a compounding solution, a slight increase in the tromethamine peak area was observed (<5.5%). Our study suggests that chloride ions in excess sequentially interact firstly with the counterions from the organic modifiers and secondly with the analyte via the stationary phase and the contribution of hydrophilic interaction liquid chromatography retention mechanisms. Because of these effects, the hydrophilic interaction liquid chromatography-charged aerosol detector analysis of drugs in saline solutions requires particular attention, and a correction factor for quantitative purposes that accounts for formulation ions remains appropriate.

Quantitative nuclear magnetic resonance of chloride by an accurate internal standard approach

Chloride is the most common counterion used to improve aqueous solubility and enhance stability of small molecule active pharmaceutical ingredients. While several analytical techniques, such as titration, HPLC with charged aerosol detection, and ion chromatography, are currently utilized to assay the level of chloride, they have notable limitations, and these instruments may not be readily available. Here, we present a generally applicable ³⁵ Cl solution NMR method to assay the level of chloride in pharmaceutical compounds. The method uses KClO₄ as an internal standard for improved accuracy in comparison with external standard methods, and it was found to be robust, linear over three orders of magnitude, precise (<3% RSD), and accurate (<0.5% absolute error).

Simultaneous quantification of nicotine salts in e-liquids by LC-MS/MS and GC-MS

Nicotine salts, formed by nicotine and organic acids, are commonly added to electronic cigarette liquids for their ability to provide desirable sensory effects. Analytical strategies have been developed to detect the types of organic acids and nicotine levels, but methods for directly measuring nicotine salts are still desirable. Herein, a novel approach is presented for the simultaneous quantification of non-volatile and volatile nicotine salts via liquid chromatography/tandem mass spectroscopy (LC-MS/MS) and gas chromatography/mass spectroscopy (GC-MS). This approach was validated with recovery experiments, which yielded recovery values between 92.0% and 110.8%. This method is the first technique for quantifying multiple nicotine salts that could be present in commercial e-liquids. Without using derivatization steps, different nicotine salts could be detected rapidly and conveniently. This new method was demonstrated with 10 e-cigarette liquid samples, providing satisfactory outcomes. It could be used to study organic acids and protonated nicotine in e-liquids and the release behaviour of nicotine salts in electronic cigarettes.

Investigation of hydrophilic interaction liquid chromatography coupled with charged aerosol detector for the analysis of tromethamine

Tromethamine (TMM), often encountered in a final drug product, exhibits interesting chemical properties as a counter ion, buffer, or active ingredient. European and US pharmacopeias propose titration against hydrogen chloride for TMM assays. However, this method can be a hindrance when using drugs containing low concentrations of TMM in complex buffered formulations. Due to the lack of chromophores and the high hydrophilicity of TMM, we performed a simple and reliable hydrophilic interaction chromatography coupled with a charged aerosol detector (HILIC-CAD) separation approach as an alternative for TMM analysis. An amide stationary phase and a mobile phase consisting of a binary mixture of acetonitrile and 10 mM ammonium formate, pH 3 (80/20, V/V) were used. As the CAD response deeply depends on parameters such as stationary phases and pH buffer, we investigated their impact and explored the optimal signal conditions. Including TMM analogs such as tris(hydroxymethyl) nitromethane and 2-amino-2-ethyl-1,3-propanediol allowed us to select these parameters appropriately. The effects of the evaporation temperature, flow rate, and power function value (PFV) on the CAD signal response were also studied and optimized. The method was validated according to the ICH Q2 R1 guidelines. A linear response (mean R² > 0.997) covering the range for low TMM concentrations (170-520 μg/mL) was achieved. Satisfactory intra-day and inter-day precisions were obtained with RSDs lower than 1.9% and 2.8%, respectively. The trueness ranged from 99.6% to 101.2%, and the LOD was found to be 1.1 μg/mL. The HILIC-CAD method has been applied to a sterile TMM solution for injection.

Performance of ion pairing chromatography and hydrophilic interaction liquid chromatography coupled to charged aerosol detection for the analysis of underivatized amino acids

The charged aerosol detector (CAD) is frequently employed in liquid chromatography for the analysis of small polar and ionizable compounds such as amino acids and amino sugars, which provide a weak chromophore only. Separation of these compounds is achieved by means of ion pair chromatography (IPC), and, more recently, hydrophilic interaction chromatography (HILIC) techniques. However, as the CAD's response is highly dependent on the mobile phase composition, the substantial differences in the mobile phase composition of IPC and HILIC have a distinct impact on the detector's performance. This study was aimed at systematically comparing the performance of IPC and HILIC when coupled to the CAD. Therefore, the separation techniques characterized by their specific mobile phase compositions were evaluated for their influence on the CAD response and the signal-to-noise ratio (S/N) of the amino acids L-alanine, L-leucine, and L-phenylalanine applying the response surface methodology (RSM). The RSM results derived from flow injection analysis (FIA) indicated that the CAD response and thus the obtainable S/N are significantly higher in HILIC compared to IPC where the S/N decreased with the chain length of the applied ion-pairing reagent. In addition, an IPC and a HILIC method, respectively, were developed for the impurity profiling of the branched-chain amino acids (BCAAs) L-leucine, L-isoleucine, and L-valine. The beneficial effects of the HILIC conditions on the S/N observed under FIA conditions were partly offset by moderate column bleed effects when using an amide functionalized column, which facilitates the separation in the HILIC method. Satisfactory LOQs (3-10 ng on column) were obtained with both methods; however, the HILIC method was found to be slightly superior in terms of sensitivity and separation efficiency.

Preparation, characterization and antimicrobial assessment of selected ciprofloxacin salts

The formation of salts is considered a simple strategy to modify the physicochemical properties of active pharmaceutical ingredients. In this study, seven novel binary and ternary organic salts of ciprofloxacin (CP) were prepared with benzoic acid (BA), acetylsalicylic acid (ASA), p-coumaric acid (PCMA) and p-aminosalicylic acid (PASA). They were characterized by spectroscopic techniques and differential scanning calorimetry. Solubility and partition coefficients values were also measured. Evaluation of the antimicrobial activity of the organic salts against Staphylococcus aureus and Staphylococcus epidermidis revealed that most of the new salts had higher antimicrobial activity than CPHCl against both strains. The most active compounds against S. epidermidis and S. aureus were CP-PASA and CPPCMA, resp., which were up to fourteen times more potent than parent CP-HCl. Our findings indicated a strong correlation between the lipophilicity of the formed salts and their antimicrobial activity and showed that an optimum value of lipophilicity (log P = 0.75) seemed to be necessary to maximize the antimicrobial activity. These findings highlighted the improved physical, thermal and antimicrobial properties of the new salts of CP that can aid in providing higher bioavailability than CP-HCl.

Simultaneous quantitation of inorganic ions in oligonucleotides using mixed-mode liquid chromatography coupled with a charged aerosol detector

The amounts of inorganic ions (e.g. sodium, potassium, magnesium, calcium, chloride, and phosphate) in intrathecally administered oligonucleotide drug products need to be controlled in order to meet the final target formulation composition. During process development, these ions are measured to ensure the solution composition does not change during purification or drug product compounding and to ensure the final drug product targets are achieved. A quantitative method for ion analysis in antisense oligonucleotide (ASO) drugs was developed by mixed-mode anion exchange/cation exchange-hydrophilic interaction liquid chromatography (AEX/CEX-HILIC) with a charged aerosol detector (CAD). This thirteen-minute method measures monovalent and multivalent cations and anions simultaneously. LC separation conditions, CAD parameters, and sample preparation were judiciously optimized to ensure that the method is specific, accurate, precise, linear, robust, and rugged. With this LC-CAD approach, ion analysis for oligonucleotide drugs can be performed in most analytical labs to support drug development.

Preparation and evaluation of a polymer-based sulfobetaine zwitterionic stationary phase

We describe a polymer-based sulfobetaine zwitterionic stationary phase for hydrophilic interaction liquid chromatography (HILIC). It was prepared by grafting acrylamide-type sulfobetaine monomer instead of common methacrylate-type sulfobetaine onto hydrolysed poly (glycidyl methacrylate-divinylbenzene) (GMA-DVB) microspheres via pendant double bonds of DVB. The phase has been characterized by elemental analysis, scanning electron micrograph and N₂ adsorption-desorption experiment. It shows wider pH tolerance range (from 2 to 12) and excellent separation ability towards common strong polar analytes such as nucleosides and nucleic bases, water-soluble vitamins, amino acids, inorganic anions and cations. Notably, it exhibits negligible baseline noise level (~0.15 pA) under typical HILIC mobile phase. Excellent selectivity in separation of α- and β-anomers of reducing sugars and lactose/lactulose has also been observed.

Simultaneous Quantification of Commonly Used Counter Ions in Peptides and Active Pharmaceutical Ingredients by Mixed Mode Chromatography and Evaporative Light Scattering Detection

In academia and industry, the analysis of counter ions in small molecules and synthetic peptides represents a great challenge. Due to the frequent use of salt forms and the application of a wider range of counter ions in pharmaceutically used substances, simple and generic methods for quantification are required. Especially, the analysis of trifluoracetic acid (TFA) in synthetic peptides is of high interest. Quantification of TFA is needed to assess the content and safety of synthetic peptides and for the interpretation of functional assay results, respectively. In here, a full quantitative mixed mode high performance liquid chromatography based method coupled to evaporative light scattering detection is presented. Finally, 14 positively and negatively charged counter ions were simultaneously quantified within 30 minutes. The method was validated in terms of specificity, accuracy, precision, limit of quantification, sample stability and carry over as proposed by the International Council of Harmonization. In order to prove the applicability of the procedure, small molecules reference substances and synthetic peptides were analyzed, respectively. The obtained results indicated a successful determination of counter ions in small molecules and differences to expected concentrations of prepared peptide solutions. Furthermore, an unexpectedly high content of sodium was observed for synthetic peptides.

Hydrophilic Interaction Liquid Chromatography (HILIC): Latest Applications in the Pharmaceutical Researches

Background:

Significant advances have been occurred in analytical research since the 1970s by Liquid Chromatography (LC) as the separation method. Reverse Phase Liquid Chromatography (RPLC) method, using hydrophobic stationary phases and polar mobile phases, is the most commonly used chromatographic method. However, it is difficult to analyze some polar compounds with this method. Another separation method is the Normal Phase Liquid Chromatography (NPLC), which involves polar stationary phases with organic eluents. NPLC presents low-efficiency separations and asymmetric chromatographic peak shapes when analyzing polar compounds. Hydrophilic Interaction Liquid Chromatography (HILIC) is an interesting and promising alternative method for the analysis of polar compounds. HILIC is defined as a separation method that combines stationary phases used in the NPLC method and mobile phases used in the RPLC method. HILIC can be successfully applied to all types of liquid chromatographic separations such as pharmaceutical compounds, small molecules, metabolites, drugs of abuse, carbohydrates, toxins, oligosaccharides, peptides, amino acids and proteins.

Objective:

This paper provides a general overview of the recent application of HILIC in the pharmaceutical research in the different sample matrices such as pharmaceutical dosage form, plasma, serum, environmental samples, animal origin samples, plant origin samples, etc. Also, this review focuses on the most recent and selected papers in the drug research from 2009 to the submission date in 2020, dealing with the analysis of different components using HILIC.

Results and Conclusion:

The literature survey showed that HILIC applications are increasing every year in pharmaceutical research. It was found that HILIC allows simultaneous analysis of many compounds using different detectors.

Multiplexed small molecule impurity monitoring in antibody-based therapeutics by mixed-mode chromatography paired with charged aerosol detection

With advanced genetic engineering technologies and better understanding of disease biology, antibody-based therapeutics are emerging as promising new generation biopharmaceuticals. These novel antibody formats are carefully designed to possess desired features such as enhanced selectivity. However, their high level of structural complexity with multiple components often leads to long development and complex multi-step manufacturing processes, through which a variety of potential small molecule impurities can be introduced. In this work, an in-process assay was developed in which mixed-mode chromatography coupled with charged aerosol detection was utilized for multiplexed detection of nine reagents commonly used in development and manufacturing of antibody-based therapeutics: isopropyl β-d-1-thiogalactopyranoside, methionine sulfoximine, ampicillin, guanidine, dehydroascorbic acid, glutathione, tris(2-carboxyethyl)phosphine, N-acetyl cysteine, and arginine. This method utilized a mixed-mode column with ion-exchange properties operated in the hydrophilic interaction chromatography mode. Various parameters were systematically optimized and under optimal conditions, the method demonstrated excellent specificity, sensitivity, linearity, precision, accuracy, and was successfully applied to determine residual impurities in multiple samples from antibody-derived molecules.

Practical optimization of liquid chromatography/mass spectrometry conditions and pretreatment methods toward the sensitive quantification of auxin in plants

RATIONALE

The plant hormone auxin, indole-3-acetic acid, regulates many aspects of plant growth and development. Auxin quantification should offer broad insights into its mechanistic action in plants. However, limited auxin content in plant tissues hampers the establishment of quantification methods without the highest graded instruments or deeply specialized experimental techniques.

METHODS

In this study, we detailed optimized conditions for high-performance liquid chromatography coupled with triple-quadrupole mass spectrometry (LC/MS). We compared LC/MS conditions, such as columns, mobile phases, parameters of acquisition methods (selective or multiple ion monitoring), dwell times (DTs), and channel numbers, using differentially mixed authentic auxin and its related compounds. We further investigated pretreatment methods through the optimization of auxin recovery and irrelative compound removal from plant tissues prior to the LC/MS analysis.

RESULTS

Our LC/MS analysis demonstrated the particular importance of the column, DTs, and channel numbers on detection sensitivity. Our comparative analysis developed optimal pretreatment methods, including the pulverization of plants, concentration of extract through centrifugal evaporation, and removal of irrelative metabolites using liquid-liquid extraction and a spin filter. We injected plant samples into our LC/MS system, quantified auxin and eight related compounds in a single measurement, and determined the auxin increase in an auxin over-producing mutant.

CONCLUSIONS

Our practical optimization of LC/MS conditions and pretreatment methods provides detailed experimental processes toward the sensitive quantification of auxin from 10 mg of plant tissue. These processes have not always been clearly documented; therefore, our protocol could broadly contribute to technical advances in plant growth and development research.

Seeking universal detectors for analytical characterizations

It is highly desirable to have a universal detector that can detect all types of compounds and give a uniform response regardless of the physiochemical properties of the compounds. With such a universal detector, all components in a sample can be accurately quantified without the need for individual standards. This is especially needed for the characterization of unknowns and for non-targeted analysis, or for samples that have no isolated standards available for each component. Over the years, much effort has been put into seeking a universal detection technology. In this review, we discuss the commonly used detectors for analytical characterization, including UV, RI, ELSD, CAD, CLND, FID, VUV, MS, NMR, and hyphenated detection, with the focuses on the "universal" features of these detectors regarding the types of molecules they can detect and the uniformity of responses.

Direct analysis of chiral active pharmaceutical ingredients and their counterions by ultra high performance liquid chromatography with macrocyclic glycopeptide-based chiral stationary phases

In this work the simultaneous separation of chiral active pharmaceutical ingredients (API) in salt form from their counterions has been performed by using different high-efficiency macrocyclic glycopeptide-based chiral stationary phases (CSPs). Not only a new zwitterionic vancomycin-based CSP has been prepared (similarly to what was done for teicoplanin) but macrocyclic selectors have also been bonded to sub-2 μm fully porous silica particles through traditional ureidic linkage to obtain versions of CSPs suitable for ultra-high performance applications. The direct separation of chiral APIs and counterions is particularly attracting since it simplifies the workflow traditionally used with reduction of analysis time and costs. The wide selection of macrocyclic antibiotics CSPs now available has allowed to manage different cases that can happen in the simultaneous separation of APIs and their counterions (either cations or anions). Indeed, while inorganic cations are retained on traditional vancomycin- and teicoplanin-based CSPs, inorganic anions are almost unretained (due to Donnan's effect). On the other hand, cations and anions can be both retained on the zwitterionic versions of these CSPs. Afterwards, zwitterionic CSPs allowed the separation of other compounds including N-derivative amino-acids, profens, polyols, sugar anomers, oligosaccharides and inorganic anions/cations opening new perspectives in the use of this family of CSPs.

Impurity profiling of drug candidates: Analytical strategies using reversed-phase and mixed-mode high-performance liquid chromatography methods

The development of new active pharmaceutical ingredients (API) requires accurate impurity profiling. Nowadays, reversed-phase HPLC (RPLC) on C18 stationary phase is the method of first choice for this task and usually employed in generic screening methods. However, this method sometimes fails, especially when the target analyte is not sufficiently retained, making impurity analysis difficult or even impossible. In such cases, a second method must be available. In the present paper, we compare the merits of RPLC on C18 phase to those of previously optimized alternative methods, based on the analysis of a large and diverse set of small-molecule drug candidates. Various strategies are considered: RPLC on C18 phase but with different mobile phase composition (acidic or basic), RPLC with a pentafluorophenyl stationary phase, or mixed-mode HPLC with both bimodal and trimodal stationary phases. First, method performances were compared in terms of response rate (proportion of compounds eluted) and peak shapes for a large set of synthetic drugs (140) with structural diversity and their orthogonality was evaluated. Then a subset of compounds (25) containing varied impurity profiles was used to compare the methods based on the capability to detect impurities and evaluate the relative purity of the API.

Quantitative analysis of acid-catalyzed levulinic acid product mixture from cellulose by mixed-mode liquid chromatography

A mixed-mode weak anion-exchange/reversed-phase liquid chromatography (LC) column was successfully applied for the analysis of levulinic acid (4-oxopentanoic acid, LA) product mixture derived from cellulose. Due to the existence of ionic and neutral byproducts, the analysis of the product mixture usually requires ion chromatography, LC and gas chromatography simultaneously. The new method enables accomplishment of the analysis in one LC run within 6min. LC mobile phase of 10mM phosphate buffer containing 5% acetonitrile with pH=5.5 was used. The linear regression coefficients for the UV signal of standard compounds with the corresponding mass concentrations were greater than 0.999. The method recoveries were between 98.57-103.48%. The limits of quantification were 5, 10,1000, 1500 and 3000ng/mL for 5-hydroxymethylfurfural, furfural, acetic acid, formic acid and LA respectively. The mixed-mode column exhibits comprehensive separation mechanism of both reversed-phase and ion-exchange interactions. The mobile phase with different pH, organic modifier solvent and buffer concentration provided flexible LC method for the sample with different complexity.

Screening for Polar Chemicals in Water by Trifunctional Mixed-Mode Liquid Chromatography-High Resolution Mass Spectrometry

The presence of persistent and mobile organic contaminants (PMOC) in aquatic environments is a matter of high concern due to their capability of crossing through natural and anthropogenic barriers, even reaching drinking water. Most analytical methods rely on reversed-phase liquid chromatography (RPLC), which is quite limited for the detection of very polar chemicals. Thus, many of these PMOCs may have not been recognized as water pollutants yet, due to the lack of analytical methods capable to detect them. Mixed-mode LC (MMLC), providing the combination of RP and ion-exchange functionalities is explored in this work with a trifunctional column, combining RPLC, anion and cation exchange, which allows the simultaneous determination of analytes with extremely different properties. A nondiscriminant sample concentration step followed by a MMLC-high resolution mass spectrometry method was developed for a group of 37 very polar model chemicals with different acid/base functionalities. The overall method performance was satisfactory with a mean limit of detection of 50 ng/L, relative standard deviation lower than 20% and overall recoveries (including matrix effects) higher than 60% for 54% of model compounds. Then, the method was applied to 15 real water samples, by a suspect screening approach. For those detected PMOC with standard available, a preliminary estimation of concentrations was also performed. Thus, 22 compounds were unequivocally identified in a range of expected concentrations from 6 ng/L to 540 μg/L. Some of them are well-known PMOC, such as acesulfame, perfluorobutanoic acid or metformin, but other novel pollutants were also identified, as for example di-o-tolylguanidine or trifluoromethanesulfonic acid, which had not or were scarcely studied in water so far.

A high-sensitivity HPLC assay for measuring intracellular Na(+) and K(+) and its application to Plasmodium falciparum infected erythrocytes

The measurement of intracellular ion concentrations, and the screening of chemical agents to identify molecules targeting ion transport, has traditionally involved low-throughput techniques. Here we present a novel HPLC method that allows the rapid, high-sensitivity measurement of cell Na⁺ and K⁺ content, demonstrating its utility by monitoring the ionic changes induced in the intracellular malaria parasite by the new spiroindolone antimalarial KAE609.

A high-throughput hydrophilic interaction liquid chromatography coupled with a charged aerosol detector method to assess trisulfides in IgG1 monoclonal antibodies using tris(2-carboxyethyl)phosphine reaction products: Tris(2-carboxyethyl)phosphine-oxide and tris(2-carboxyethyl)phosphine-sulfide

A robust, high-throughput method using hydrophilic interaction liquid chromatography (HILIC) coupled with a charged aerosol detector (CAD) is reported as a novel approach for trisulfide quantitation in monoclonal antibodies (mAbs). The products of mAb reduction using tris(2-carboxyethyl)phosphine (TCEP) include a species (TCEP(S)) that is stoichiometrically produced from trisulfides. The TCEP reaction products are chromatographically separated, detected, and quantified by the HILICCAD method. The method was qualified to quantify trisulfides across a range of 1-40% (mol trisulfide/mol mAb). In all tested matrix components, assay linearity and intermediate precision were established with correlation coefficients (R(2))>0.99, and relative standard deviations (RSD)<10%. A method comparability study was performed using peptide mapping LC-MS as an orthogonal measurement. For the range of 1-40% trisulfides, the analysis demonstrates that, on average, HILICCAD reads between 0.95 and 1.10 times the value of LC-MS with 95% confidence. Applications of the HILICCAD method include trisulfide determination in purified mAbs to be used in the production of cysteine-linked antibody-drug conjugates, and in cell culture development studies to understand sources of, and strategies for control of, trisulfides.

Mixed-mode chromatography in pharmaceutical and biopharmaceutical applications

Mixed-mode chromatography (MMC) is a fast growing area in recent years, thanks to the new generation of mixed-mode stationary phases and better understanding of multimode interactions. MMC has superior applications in the separation of compounds that are not retained or not well resolved by typical reversed-phase LC methods, especially for polar and charged molecules. Due to the multiple retention modes that a single MMC column can offer, often MMC provides additional dimension to a separation method by adjusting the mobile phase conditions. Mixed-mode media is also an effective way to clean up complex sample matrices for purification purposes or for sensitive detection of trace amounts of analytes. In this article, we discuss mixed-mode stationary phases and separation mechanisms and review recent advances in pharmaceutical and biopharmaceutical applications including the analysis and/or purification of counterions, small molecule drugs, impurities, formulation excipients, peptides and proteins.

Imidazolium embedded C8 based stationary phase for simultaneous reversed-phase/hydrophilic interaction mixed-mode chromatography

A new imidazolium embedded C8 based stationary phase (SIL-MPS-VOL) was facilely prepared by two steps and characterized by Fourier transform infrared spectrometry and thermogravimetric analysis. Due to the introduction of quaternary imidazolium group to the traditional C8 stationary phase, the developed SIL-MPS-VOL column demonstrated both reversed-phase liquid chromatography (RPLC) and hydrophilic interaction liquid chromatography (HILIC) retention mechanisms. A series of hydrophobic and hydrophilic test samples, including benzene homologues, anilines, positional isomers, nucleosides and nucleotides, were used to evaluate the developed SIL-MPS-VOL stationary phase. A rapid separation time, high separation efficiency and planar selectivity were achieved, compared with the commercially available C8 column. Moreover, the developed stationary phase was further used to detect and separate of melamine in powdered infant formula and high polar component of secondary metabolites of Trichoderma, and improved separation efficiency was achieved, indicating the potential merits of the developed SIL-MPS-VOL stationary phase for simultaneous separation of complex hydrophobic and hydrophilic samples with high selectivity.

Simultaneous determination of water-soluble vitamins in beverages and dietary supplements by LC-MS/MS

An LC-MS/MS method was developed for the simultaneous determination of 15 water-soluble vitamins that are widely used as additives in beverages and dietary supplements. This combined method involves the following simple pre-treatment procedures: dietary supplement samples were prepared by centrifugation and filtration after an extraction step, whereas beverage samples were diluted prior to injection. Chromatographic analysis in this method utilised a multi-mode ODS column, which provided reverse-phase, anion- and cation-exchange capacities, and therefore improved the retention of highly polar analytes such as water-soluble vitamins. Additionally, the multi-mode ODS column did not require adding ion pair reagents to the mobile phase. We optimised the chromatographic separation of 15 water-soluble vitamins by adjusting the mobile phase pH and the organic solvent. We also conducted an analysis of a NIST Standard Reference Material (SRM 3280 Multi-vitamin/Multi-element tablets) using this method to verify its accuracy. In addition, the method was applied to identify the vitamins in commercial beverages and dietary supplements. By comparing results with the label values and results obtained by official methods, it was concluded that the method could be used for quality control and to compose nutrition labels for vitamin-enriched products.