Application of nanomaterials in sample preparation

Synergistically Enhanced Electrochemical Sensing of Food Adulterant in Milk Sample at Erbium Vanadate/Graphitic Carbon Nitride Composite

Dimetridazole (DMZ), a nitroimidazole derivative, is a notable antibiotic that has garnered growing interest in the medical community owing to its noteworthy pharmacological and toxicological properties. Increasing interest is being directed toward developing high-performance sensors for continuous monitoring of DMZ in food samples. This research investigated an electrochemical sensor-based nano-sized ErVO4 attached to a sheet-like g-CN-coated glassy carbon electrode to determine dimetridazole (DMZ). The chemical structure and morphological characterization of synthesized ErVO4@g-CN were analyzed with XRD, FTIR, TEM, and EDS. Irregular shapes of ErVO4 nanoparticles are approximately 15 nm. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were followed to examine the electrochemical performance in pH 7 phosphate buffer solution for higher performance. This electrochemical sensor showed a low detection limit (LOD) of 1 nM over a wide linear range of 0.5 to 863.5 µM. Also, selectivity, stability, repeatability, and reproducibility studies were investigated. Furthermore, this electrochemical sensor was applied to real-time milk sample analysis for the detection of analytes.

Adsorption of thorium (IV) ions using a novel borate-based nano material Ca3Y2B4O12: Application of response surface methodology and Artificial Neural Network

Since nuclear wastes are the most important wastes in terms of health and the environment, they are evaluated differently within nuclear reactors as well as in terms of their use in medical and industrial applications. In some cases, emergency intervention is necessary due to the amount of radioactivity or the physical and/or chemical conditions. . The purpose of this study is to investigate the adsorption properties of nano Ca₃Y₂B₄O₁₂ (CYBO) material synthesized by the sol-gel combustion method for the adsorption of Thorium (IV) from an aqueous medium. We tested how pH (3-8), the concentration of Th (IV) (25-125 mg/L), amount of adsorbent value (0.005-0.08 g) and temperature (20-60 °C), affect adsorption efficiency. The best possible combinations of these parameters were examined by Response Surface Methodology (RSM) and Artificial Neural Network (ANN). R² values for RSM and ANN were 0.9964 and 0.9666, respectively. According to the models, the adsorption capacity under the optimum conditions determined for the RSM and ANN model was found to be 134.62 mg/g and 125.12 mg/g, respectively.

Synthesis of molecularly-imprinted polymers towards a group of amphetamine-type stimulants by reflux precipitation polymerization with a pseudo template

Determination of amphetamine-type drugs (ATSs) in urine and wastewater is a simplified approach for the widespread monitoring of ATSs abuse. To improve the sensitivity of the analytical methods, molecularly imprinted polymers (MIPs) based solid-phase extraction (SPE) pretreatment attracted great attention in this field. Generally, smaller particle sizes and more uniform morphology of the MIPs could provide higher detection sensitivity. Our previous works showed reflux precipitation polymerization (RPP) is a method for synthesizing monodispersed MIPs with small particle size. However, synthesis of uniform spherical MIPs towards a group of targets has never been reported. Therefore, in the present work, MIPs towards a group of ATSs were synthesized via RPP with a pseudo template for the first time. After screening potential pseudo-templates, N-methylphenylethylamine (MPEA) was selected as the optimal pseudo-template. MPEA-MIPs were characterized by scanning electron microscope (SEM), FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS) spectra. Adsorption isotherms, adsorption kinetics and selectivity were evaluated, and the experimental results indicated that the MPEA-MIPs possessed good selectivity and adsorption property towards ATSs. After optimization of the MIP-SPE procedure, the MIP-SPE cartridges were then coupled with liquid chromatography and tandem mass spectrometry (LC-MS/MS) for determination of ATSs. The evaluation results showed that MIP-SPE-LC-MS/MS displayed good linearity (R² >0.991) in the linear range (1.0-50.0 µg/L for urine and 0.5-50.0 µg/L for wastewater), and low matrix effect (85-112%). The limit of detection (LOD) was 0.05 -0.29 µg/L, and the accuracy (85-115%) and repeatability (RSD ≤ 15%) were satisfactory at low, medium and high concentrations. To the best of our knowledge, this is the first time that dummy MIPs towards a group of ATSs were synthesized by RPP polymerization, which showed great potential for the detection of ATSs in urine and wastewater.

Superhydrophobic Nanosilica Decorated Electrospun Polyethylene Terephthalate Nanofibers for Headspace Solid Phase Microextraction of 16 Organochlorine Pesticides in Environmental Water Samples

A new solid phase micro extraction (SPME) fiber coating composed of electrospun polyethylene terephthalate (PET) nanofibrous mat doped with superhydrophobic nanosilica (SiO2) was coated on a stainless-steel wire without the need of a binder. The coating was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectrometer (FTIR) techniques and it was used in headspace-SPME of 16 organochlorine pesticides in water samples prior to gass chromatography micro electron capture detector (GC-µECD) analysis. The effects of main factors such as adsorption composition, electrospinning flow rate, salt concentration, extraction temperature, extraction time, and desorption conditions were investigated. Under the optimum conditions, the linear dynamic range (8−1000 ng L−1, R2 > 0.9907), limits of detection (3−80 ng L−1), limits of quantification (8−200 ng L−1), intra-day and inter-day precisions (at 400 and 1000 ng L−1, 1.7−13.8%), and fiber-to-fiber reproducibility (2.4−13.4%) were evaluated. The analysis of spiked tap, sewage, industrial, and mineral water samples for the determination of the analytes resulted in satisfactory relative recoveries (78−120%).

Solventless Microextration Techniques for Pharmaceutical Analysis: The Greener Solution

Extensive efforts have been made in the last decades to simplify the holistic sample preparation process. The idea of maximizing the extraction efficiency along with the reduction of extraction time, minimization/elimination of hazardous solvents, and miniaturization of the extraction device, eliminating sample pre- and posttreatment steps and reducing the sample volume requirement is always the goal for an analyst as it ensures the method’s congruency with the green analytical chemistry (GAC) principles and steps toward sustainability. In this context, the microextraction techniques such as solid-phase microextraction (SPME), stir bar sorptive extraction (SBSE), microextraction by packed sorbent (MEPS), fabric phase sorptive extraction (FPSE), in-tube extraction dynamic headspace (ITEX-DHS), and PAL SPME Arrow are being very active areas of research. To help transition into wider applications, the new solventless microextraction techniques have to be commercialized, automated, and validated, and their operating principles to be anchored to theory. In this work, the benefits and drawbacks of the advanced microextraction techniques will be discussed and compared, together with their applicability to the analysis of pharmaceuticals in different matrices.

A capillary driven microfluidic chip for SERS based hCG detection

In this study, a capillary driven microfluidic chip-based immunoassay was developed for the determination of Human Chorionic Gonadotropin (hCG) protein, which is prohibited by the World Anti-Doping Agency (WADA). Here, we used antibody modified magnetic metal organic framework nanoparticles (MMOFs) as a capture prob in urine sample. MMOF captured hCG was transferred in a capillary driven microfluidic chip consisting of four chambers, and the interaction of MMOF with gold nanorods labelled with 5,5'-Dithiobis-(2-nitrobenzoic acid) (DTNB) as a Raman label was carried out in the capillary driven microfluidic chip. The movement of MMOF through first chamber to the last chamber was achieved with a simple magnet. In the last chamber of capillary driven microfluidic chip, SERS signals of DTNB molecules from the sandwich complex were recorded using a Raman spectrophotometer. The selectivity of the developed method was demonstrated by applying the same procedure for the detection of Human Luteinizing Hormone (hLH), Human Chorionic Gonadotropin Hormone (hGH) and Immunoglobulin G (IgG) protein. The regression coefficient and limit of detection obtained from the standard addition method were found as 0,9985 and 0,61 IU/L, respectively. Furthermore, the conventional ELISA method confirmed that the results obtained by the presented method were acceptable with the similarity of 97.9% in terms of average recovery value, for the detection of hCG in urine samples. The analysis system developed for target proteins will be an alternative technique such as Western Blot used in routine analysis that is expensive and time consuming.

Rapid synthesis of graphite phase carbon nitride/zeolitic imidazolate framework-8 with hierarchical structure and its superior adsorption of polycyclic aromatic hydrocarbons from aqueous solution

Graphite phase carbon nitride (g-C₃N₄) incorporating zeolitic imidazolate framework-8 (ZIF-8) nanocomposite (g-C₃N₄ /ZIF-8) with hierarchical structure was synthesized successfully by simple and rapid in situ growth method at room temperature. The composites were used as an adsorbent of solid-phase extraction (SPE) and the superior adsorptive removal of polycyclic aromatic hydrocarbons (PAHs) for the first time. Under several optimum conditions, the g-C₃N₄ /ZIF-8-SPE-HPLC-FLD method show low detection limits (0.006-3.41 μg L^-1) and limit of quantification (0.02-11.3 μg L^-1), wide linear ranges from 0.02 to 1000 μg L^-1 for all compounds, correlation coefficients (r) of more than 0.9968, and satisfying reproducibility (relative standard deviations, RSDs < 4.0% for intra-day, RSDs < 8.3% for inter-day), the spiked recoveries at two levels of 10.0, 50.0 μg L^-1 were in the range of 77.4%-114% with the RSDs less than 8.66%. In addition, the g-C₃N₄/ZIF-8 nanocomposites demonstrated excellent enrichment ability and extraction efficiency for PAHs compared with commercial adsorbents, which might since there were strong π-π stacking force, hydrophobic interaction, hydrogen bonding, and more adsorption sites compared with other adsorbents. Finally, the g-C₃N₄ /ZIF-8 based SPE method was combined with high-performance liquid chromatography (HPLC) to detect fifteen PAHs in environmental water samples successfully.

Adsorption of thorium (IV) ions by metal ion doped ZnO nanomaterial prepared with combustion synthesis: Empirical modelling and process optimization by response surface methodology (RSM)

Environmental problems have reached enormous dimensions, driving efforts to remove and recycle waste from energy and industrial production. In particular, removing the radionuclide contamination that occurs as the nuclear industry grows is difficult and costly, but it is vital. Technologic and economical methods and advanced facilities are needed for the separation and purification of radioactive elements arising from the nuclear industry and uranium and thorium mining. With the adsorption method, which is the most basic separation and recovery method, the use of high-capacity nanomaterials has recently gained great importance in reducing the activity of the waste, reducing its volume by transforming it into solid form, and recovering and removing liquid radioactive wastes that might harm the ecological environment. This study aimed to determine the adsorption properties of metal ion-doped nano ZnO (nano-ZnO:Al) material synthesized by the microwave-assisted gel combustion method for the adsorption of thorium (IV) from aqueous media. First, characterization processes such as XRD, SEM, BET and zeta potential were performed to observe changes in the host ZnO adsorbent structure caused by the doping process. Later, this was optimized via the response surface method (RSM), which is widely used in the characterization of the adsorption properties of thorium (IV) from aqueous solutions. Such characterization is commonly used in industrial research. We tested how pH (3-8), temperature (20-60 °C), Th (IV) concentration (25-125 mg/L) and adsorbent amount (0.01-0.1 g) affect adsorption efficiency. The best possible combinations of these parameters were determined by RSM. It was calculated by RSM that the design fits the second order (quadratic) model using the central composite design (CCD) for the design of experimental conditions. R² and R² adjusted values from the parameters showing the model fit were 0.9923 and 0.9856, respectively. According to the model, the experimental adsorption capacity was 192.3 mg/g for the doped-ZnO nanomaterial under the theoretically specified optimum conditions. Also, the suitability of Th (IV) adsorption to isotherms was examined and thermodynamic parameters were calculated.

Carbon xerogels combined with nanotubes as solid-phase extraction sorbent to determine metaflumizone and seven other surface and drinking water micropollutants

Carbon xerogels (CXs) were synthesized by polycondensation of resorcinol and formaldehyde, followed by thermal annealing, and subjected to hydrothermal oxidation. Solid-phase extraction (SPE) cartridges were filled with CXs and tested for extraction of metaflumizone and other seven environmental micropollutants (acetamiprid, atrazine, isoproturon, methiocarb, carbamazepine, diclofenac, and perfluorooctanesulfonic acid) before chromatographic analysis. The recoveries obtained with the pristine CX were low for most analytes, except for metaflumizone (69 ± 5%). Moreover, it was concluded that the adsorption/desorption process of the micropollutants performed better on CXs with a less acidic surface (i.e., pristine CX). Thus, cartridges were prepared with pristine CX and multi-walled carbon nanotubes (MWCNTs) in a multi-layer configuration. This reusable cartridge was able to simultaneously extract the eight micropollutants and was used to validate an analytical methodology based on SPE followed by ultra-high performance liquid chromatography-tandem mass spectrometry. A widespread occurrence of 6/8 target compounds was observed in surface water collected in rivers supplying three drinking water treatment plants and in the resulting drinking water at the endpoint of each distribution system. Therefore, the first study employing CXs and MWCNTs as sorbent in multi-layer SPE cartridges is herein reported as a proof of concept for determination of multi-class water micropollutants.

Research progress on the carcinogenicity of metal nanomaterials

With the rapid development of nanotechnology, new nanomaterials with enormous potentials continue to emerge, especially metal nanomaterials. Metal nanomaterials possess the characteristics of metals and nanomaterials, so they are widely used in many fields. But at the same time, whether the use or release of metal nan4omaterials into the environment is toxic to human beings and animals has now attained widespread attention at home and abroad. Currently, it is an indisputable fact that cancer ranks among the top causes of death among residents worldwide. The properties of causing DNA damage and mutations possessed by these metal nanomaterials make them unpredictable influences in the body, subsequently leading to genotoxicity and carcinogenicity. Due to the increasing evidence of their roles in carcinogenicity, this article reviews the toxicological and carcinogenic effects of metal nanomaterials, including nano-metal elements (nickel nanoparticles, silver nanoparticles, and cobalt nanoparticles) and nano-metal oxides (titanium dioxide nanoparticles, silica nanoparticles, zinc oxide nanoparticles, and alumina nanoparticles). This article provides a reference for the researchers and policymakers to use metal nanomaterials rationally in modern industries and biomedicine.

Determination of trace bisphenols in functional beverages through the magnetic solid-phase extraction with MOF-COF composite

In this study, a novel porous composite (Fe₃O₄@TAPB-COF@ZIF-8) consisting of metal-organic and covalent organic frameworks was developed and applied to the magnetic solid-phase extraction (MSPE) of bisphenols. The extraction parameters such as the extraction time, solution pH, amounts of adsorbent, and ionic strength were investigated to obtain the best extraction conditions. By optimizing the MSPE, a convenient and sensitive analytical method was established in combination with high-performance liquid chromatography. The method achieved low detection limits (0.04-0.05 ng mL^-1), wide linear range (0.25-1000 ng mL^-1), good repeatability (1.20-4.30%), good reproducibility (1.34-4.03%), and satisfactory recoveries of four functional beverages (66.2-116.6%).

Nanocellulose Hybrids with Metal Oxides Nanoparticles for Biomedical Applications

Cellulose is one of the most affordable, sustainable and renewable resources, and has attracted much attention especially in the form of nanocellulose. Bacterial cellulose, cellulose nanocrystals or nanofibers may serve as a polymer support to enhance the effectiveness of metal nanoparticles. The resultant hybrids are valuable materials for biomedical applications due to the novel optical, electronic, magnetic and antibacterial properties. In the present review, the preparation methods, properties and application of nanocellulose hybrids with different metal oxides nanoparticles such as zinc oxide, titanium dioxide, copper oxide, magnesium oxide or magnetite are thoroughly discussed. Nanocellulose-metal oxides antibacterial formulations are preferred to antibiotics due to the lack of microbial resistance, which is the main cause for the antibiotics failure to cure infections. Metal oxide nanoparticles may be separately synthesized and added to nanocellulose (ex situ processes) or they can be synthesized using nanocellulose as a template (in situ processes). In the latter case, the precursor is trapped inside the nanocellulose network and then reduced to the metal oxide. The influence of the synthesis methods and conditions on the thermal and mechanical properties, along with the bactericidal and cytotoxicity responses of nanocellulose-metal oxides hybrids were mainly analyzed in this review. The current status of research in the field and future perspectives were also signaled.

A Review on the Use of Impedimetric Sensors for the Inspection of Food Quality

This paper exhibits a thorough review of the use of impedimetric sensors for the analysis of food quality. It helps to understand the contribution of some of the major types of impedimetric sensors that are used for this application. The deployment of impedimetric sensing prototypes has been advantageous due to their wide linear range of responses, detection of the target analyte at low concentrations, good stability, high accuracy and high reproducibility in the results. The choice of these sensors was classified on the basis of structure and the conductive material used to develop them. The first category included the use of nanomaterials such as graphene and metallic nanowires used to form the sensing devices. Different forms of graphene nanoparticles, such as nano-hybrids, nanosheets, and nano-powders, have been largely used to sense biomolecules in the micro-molar range. The use of conductive materials such as gold, copper, tungsten and tin to develop nanowire-based prototypes for the inspection of food quality has also been shown. The second category was based on conventional electromechanical circuits such as electronic noses and other smart systems. Within this sector, the standardized systems, such as electronic noses, and LC circuit -based systems have been explained. Finally, some of the challenges posed by the existing sensors have been listed out, along with an estimate of the increase in the number of sensors employed to assess food quality.

Magnetic solid-phase extraction coupled with UHPLC-MS/MS for four antidepressants and one metabolite in clinical plasma and urine samples

Aim: Routine therapeutic drug monitoring is highly recommended since common antidepressant combinations increase the risk of drug-drug interactions or overlapping toxicity. Materials & methods: A magnetic solid-phase extraction by using C₁₈-functionalized magnetic silica nanoparticles (C₁₈-Fe₃O₄@SiO₂ NPs) as sorbent was proposed for rapid extraction of venlafaxine, paroxetine, fluoxetine, norfluoxetine and sertraline from clinical plasma and urine samples followed by ultra-HPLC-MS/MS assay. Results: The synthesized C₁₈-Fe₃O₄@SiO₂ NPs showed high magnetization and efficient extraction for the analytes. After cleanup by magnetic solid-phase extraction, no matrix effects were found in plasma and urine matrices. The analytes showed LODs among 0.15-0.75 ng ml^-1, appropriate linearity (R ≥ 0.9990) from 2.5 to 1000 ng ml^-1, acceptable accuracies 89.1-110.9% with precisions ≤11.0%. The protocol was successfully applied for the analysis of patients' plasma and urine samples. Conclusion: It shows high potential in routine therapeutic drug monitoring of clinical biological samples.

A facile one-pot green synthesis of β-cyclodextrin decorated porous graphene nanohybrid as a highly efficient adsorbent for extracting aflatoxins from maize and animal feeds

In this paper, β-cyclodextrin (β-CD) supported on porous graphene nanohybrid (β-CDPG) was obtained by self-assembly of functionalized graphene nanosheets into a three-dimensional network in the presence of ascorbic acid via an in situ graphene oxide reduction and β-CD functionalization process during a hydrothermal reaction. The prepared supramolecular nanohybrid was further packed into a reusable syringe filter holder and applied as an adsorbent for solid phase extraction of four aflatoxins (B1, B2, G1, G2). Under optimal conditions, the detection limits and linear dynamic ranges were achieved in the range of 0.0075-0.030 μg kg^-1 and 0.025-100 μg kg^-1, respectively and the relative standard deviations were less than 6.1%. Good recoveries were observed for analyzing target AFs in maize and cereal-based chicken feed samples ranged from 90.5 to 105%. The method offered simultaneous advantages of high supramolecular recognition and enrichment capability of β-CD and the high specific surface area of the porous graphene.

Green Silver Nanoparticles Confined in Monolithic Silica Disk-packed Spin Column for Human Serum Albumin Preconcentration

Background:

In recent times many new uses have been found for nanomaterials that have undergone homogenous immobilization within porous supports. For this paper, immobilization of SNPs on a thiol-functionalized silica monolith using a fast, easy, environmentally friendly and costeffective process was performed. This was achieved by modifying the surface of a silica-based monolith using thiol groups, and then we fabricated green SNPs in situ, reducing an inorganic precursor silver nitrate solution (AgNO3) by employing tangerine peel extract as a reducing reagent, with Ag-thiol bonds forming along the monument. Doing this allows monoliths to be prepared in such a way that, as TEM analysis demonstrated, SNPs are evenly distributed along the rod's length. Once the materials had been fabricated, they were employed as a sorbent by being placed in a centrifuge. The SNP-thiol functionalized silica monolith was then tested using a standard protein (HSA).

Methods:

The process involves creating monolithic materials by employing a two-part sol-gel technique before modifying the surface of the silica-based monolith using thiol groups for hosting purposes. Homogenous surface coverage was achieved through the use of a non-toxic "green" reducing reagent (tangerine peel extract) to reduce a silver nitrate solution in place to create SNPs joined to the pore surface of a thiol-functionalized silica monolith, employing bonds of Ag-thiol. Once these materials were synthesized, they were classified by utilizing a number of methods based on SEM coupled with EDAX, TEM, AFM and BET analysis. The silica-based monolith, embedded with constructed SNPs, was employed as a sorbent in the preconcentration of human serum albumin (HSA).

Results:

The performance of the fabricated materials was measured against a silica-based monolith with no SNPs. Also, a silica monolith with constructed SNPs embedded was employed to capture HSA within a sample of human urine mixed with a double detergent concentrate (SDS). Such a monolith containing functionalized SNPs can be a highly effective sorbent for preconcentration of proteins in complex samples.

Conclusion:

It was shown to have superior performance compared to a bare silica-based monolith. Additionally, it was shown that a monolithic column modified by SNPs could preconcentrate spiked HSA in urine samples.

Multifunctional nanocellulose/metal and metal oxide nanoparticle hybrid nanomaterials

Nanocellulose materials are derived from cellulose, the most abundant biopolymer on the earth. Nanocellulose have been extensively used in the field of food packaging materials, wastewater treatment, drug delivery, tissue engineering, hydrogels, aerogels, sensors, pharmaceuticals, and electronic sectors due to their unique chemical structure and excellent mechanical properties. On the other hand, metal and metal oxide nanoparticles (NP) such as Ag NP, ZnO NP, CuO NP, and Fe₃O₄ NP have a variety of functional properties such as UV-barrier, antimicrobial, and magnetic properties. Recently, nanocelluloses materials have been used as a green template for producing metal or metal oxide nanoparticles. As a result, multifunctional nanocellulose/metal or metal oxide hybrid nanomaterials with high antibacterial properties, ultraviolet barrier properties, and mechanical properties were prepared. This review emphasized recent information on the synthesis, properties, and potential applications of multifunctional nanocellulose-based hybrid nanomaterials with metal or metal oxides such as Ag NP, ZnO NP, CuO NP, and Fe₃O₄ NP. The nanocellulose-based hybrid nanomaterials have huge potential applications in the area of food packaging, biopharmaceuticals, biomedical, and cosmetics.

Novel mesoporous MnO2/SnO2 nanomaterials synthesized by ultrasonic-assisted co-precipitation method and their application in the catalytic decomposition of hydrogen peroxide

Novel mesoporous MnO₂/SnO₂ catalysts were successfully synthesized via traditional and ultrasonic co-precipitation methods. Moreover, their catalytic efficiencies were evaluated in decomposition of hydrogen peroxide (H₂O₂). Interestingly, it was found that the mixing of MnO₂ with SnO₂ catalyst led to a significant improvement in their catalytic efficiencies compared with single oxides catalysts. However, the influence of ultrasonic power and irradiation time on MnO₂/SnO₂ nanomaterials were compared to get optimum synthetic condition. Subsequently, the catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption-desorption analysis and high-resolution transmission electron microscopy (HR-TEM). Results represented that the effect of ultrasonic power and irradiation time on MnO₂/SnO₂ catalysts exerted a great influence on the BET surface area and average particle diameter. Furthermore, the results showed that the best catalytic efficiency was obtained for the mesoporous MnO₂/SnO₂ catalyst which is sonicated at power of 60% for 30 min as optimum conditions. Finally, the outcomes appeared that the catalysts synthesized by ultrasonic co-precipitation method were more efficient than those synthesized by traditional co-precipitation in catalyzing H₂O₂ decomposition.

Preparation of macroscopic carbon nanohorn-based monoliths in polypropylene tips by medium internal phase emulsion for the determination of parabens in urine samples

A porous monolithic solid based on single-walled carbon nanohorns dahlia-like structure, produced from a medium internal phase emulsion (MIPE), was prepared in a polypropylene tip using UV energy. Thus, single-walled carbon nanohorns (SWNHs) were added to the organic phase where they polymerized in the presence of a radical initiator. A cross-linker (ethylene dimethacrylate, EDMA) was also used in order to obtain a more robust structure. On the other hand, aqueous phase was the responsible for generating the pores in the final solid being inside the droplets generated by the surfactant (Pluronic L121) used to stabilize the polymerization emulsion. Variables related to the formation of the monolithic phase including the stability and composition of emulsion mixture, size of pores, solvent flow resistance and robustness, were studied in detail. In addition, the potential of the SWNH-monolith as extractant phase was evaluated using parabens as target analytes. The LODs ranged from 1 to 7 μg L^-1, while the linear range was extended up to 5000 μg L^-1. The reproducibility of the extraction procedure with different batches of emulsions was acceptable with RSD values < 16% and one prepared SWNH-tip can be used for more than 100 times without apparent extraction losses. The microextraction unit yielded an enrichment factor of 20 for all analytes (extraction efficiency of 100%), with recovery values between 80% and 116% in human urine samples.

Characterization of nZVI nanoparticles functionalized by EDTA and dipicolinic acid: a comparative study of metal ion removal from aqueous solutions

Surface modification of nZVI particles by EDTA and PDCA leads to the formation of magnetite and feroxyhyte shell. PDCA capping caused the elongation of spheres into ellipsoids. Metals adsorption was more efficient on smaller ellipsoidal particles.