The comparison of dispersive solid phase extraction and multi-plug filtration cleanup method based on multi-walled carbon nanotubes for pesticides multi-residue analysis by liquid chromatography tandem mass spectrometry

A comparison of the determination of multiple pesticide residues in fruits, vegetables, and edible fungi using gas chromatography combined with filtration purification and solid-phase extraction

The multiplug filtration clean-up (m-PFC) and solid-phase extraction (SPE) pretreatment methods were employed to process 8 representative matrices in fruits, vegetables, and edible fungi, respectively. 37 pesticide residues were determined using gas chromatography equipped with ECD and FPD detectors. The measurement data were compared and analyzed following m-PFC purification and gas chromatography analysis, and both accuracy and precision met the (EU) 2021/808 requirements, achieving recovery rates for the 8 matrices ranging from 67.0% to 112.8% (averaging over 83.8% recovery), and RSDs between 0.2% and 15.2%. The 37 pesticides exhibited good linearity between 0.05 and 1.6 μg mL-1, and the matrix effect was found to be weaker compared to that of the Florisil solid-phase extraction method. The detection limits ranged from 0.0001 to 0.03 μg kg-1, with 31 pesticides showing lower detection limits compared to the SPE method. The application of this method to 150 real samples resulted in the detection of 17 pesticides across all samples. Fewer pigments were detected in m-PFC purified solutions compared to Florisil PR SPE when analyzed by liquid chromatography. m-PFC achieved more thorough adsorption of endogenous substances like pigments, reducing instrument contamination, utilizing less organic solvent, and simplifying the operation. This purification step offers clear advantages, allowing for the processing of larger sample batches in a short time. It can serve as a replacement for SPE methods like Florisi PR in batch detection of fruit and vegetable samples.

Research progress of applications for nano-materials in improved QuEChERS method

The quick, easy, cheap, effective, rugged, and safe (QuEChERS) approach is widely used in sample pretreatment in agricultural products, food, environment, etc. And nano-materials are widely used in QuEChERS method due to its small size and large specific surface area. In this review, we examine the typical applications of several commonly used nano-materials in improved QuEChERS method. These materials include multi-walled carbon nanotubes (MWCNTs) and their derivatives, magnetic nanoparticles (MNPs), metal organic frameworks (MOFs), covalent organic frameworks (COFs), graphene oxide (GO), lipid and protein adsorbent (LPAS), cucurbituril (CBs), and carbon nano-cages (CNCs), and so on. The strengths and weaknesses of each nano-material are presented, as well as the challenging aspects that need to be addressed in future research. By comparing the applications and the current technology development, this review suggests utilizing artificial intelligence (AI) to screen suitable combinations of purification agents and performing virtual simulation experiments to verify the reliability of this methodology. By doing so, we aim to accelerate the development of new products and decrease the cost of innovation. It also recommends designing smarter pretreatment instruments to enhance the convenience and automation of the sample pretreatment process and reduce the margin for human error.

Simultaneous determination of the nematicide fluensulfone and its two major metabolites in soils by ultra-high performance liquid chromatography-tandem mass spectrometry

A fast and sensitive method for simultaneously detecting nonfumigant nematicide fluensulfone (FSF) and its two major metabolites [3,4,4-trifluorobut-3-ene-1-sulfonic acid (BSA) and 5‑chloro-1,3-thiazole-2-sulfonic acid (TSA)] in different types of agricultural soils (black soil, krasnozem, sierozem) was established and validated through ultra-high performance liquid chromatography-tandem mass spectrometry. The samples were prepared by a modified quick, easy, cheap, effective, rugged, and safe method. The soil samples were firstly extracted with acetonitrile/water (4/1) and then purified with multi-walled carbon nanotubes (MWCNTs). Parameters influencing purification efficiency and recoveries, such as the type and the amount of sorbent were evaluated and compared. The overall average recoveries of three target analytes in soils were in the range of 73.1%-113.9% and the relative standard deviations (including intra-day and inter-day precision) were less than 12.7%. The limit of quantification was 5 μg/kg for all three compounds. The established method was successfully applied to examine the degradation of FSF and the formation of its two major metabolites in three different types of soil, indicating its efficacy in investigating the environmental behavior of FSF in agricultural soil system.

Global distribution of pesticides in freshwater resources and their remediation approaches

The role of pesticides in enhancing global agricultural production is magnificent. However, their unmanaged use threatens water resources and individual health. A significant pesticide concentration leaches to groundwater or reaches surface waters through runoff. Water contaminated with pesticides may cause acute or chronic toxicity to impacted populations and exert adverse environmental effects. It necessitates the monitoring and removing pesticides from water resources as prime global concerns. This work reviewed the global occurrences of pesticides in potable water and discussed the conventional and advanced technologies for the removal of pesticides. The concentration of pesticides highly varies in freshwater resources across the globe. The highest concentration of α-HCH (6.538 μg/L, at Yucatan, Mexico), lindane (6.08 μg/L at Chilka lake, Odisha, India), 2,4, DDT (0.90 μg/L, at Akkar, Lebanon), chlorpyrifos (9.1 μg/L, at Kota, Rajasthan, India), malathion (5.3 μg/L, at Kota, Rajasthan, India), atrazine (28.0 μg/L, at Venado Tuerto City, Argentina), endosulfan (0.78 μg/L, at Yavtmal, Maharashtra, India), parathion (4.17 μg/L, at Akkar, Lebanon), endrin (3.48 μg/L, at KwaZuln-Natl Province, South Africa) and imidacloprid (1.53 μg/L, at Son-La province, Vietnam) are reported. Pesticides can be significantly removed through physical, chemical, and biological treatment. Mycoremediation technology has the potential for up to 90% pesticide removal from water resources. Complete removal of the pesticides through a single biological treatment approach such as mycoremediation, phytoremediation, bioremediation, and microbial fuel cells is still a challenging task, however, the integration of two or more biological treatment approaches can attain complete removal of pesticides from water resources. Physical methods along with oxidation methods can be employed for complete removal of pesticides from drinking water.

Determination of Multi-pesticides Residues in Jasmine Flower and Its Scented Tea

For minor crops such as jasmine, the lack of pesticide registration and maximum residue limits are important issues that need to be solved in order to facilitate trading and ensure food safety. Meanwhile, reliable and quick analytical methods for multi-pesticide residues in these commodities are few, but required by various stakeholders. In this study, a method for detecting twenty-five most frequently used pesticides in jasmine flower and its scented tea by multi-plug filtration cleanup and ultra-high-performance liquid chromatography-tandem mass spectrometry was developed and validated. The cleanup process was optimized and compared with the dispersive solid phase extraction procedure. The method was validated, showing that except for methomyl, recoveries of twenty-five pesticides were 64%-108%, with relative standard deviations (n = 5) of 0.33%-10%. The method was successfully applied to detect pesticide residues in marketed samples. The results showed that some flower and tea samples contained a combination of different pesticide residues.

Automatic Multi-Plug Filtration Cleanup Tip-Filtration with Ultra-Performance Liquid Chromatography/Tandem Mass Spectrometry Detection For 22 Pesticide Residues in Typical Vegetables

An automatic multi-plug filtration cleanup (m-PFC) tip-filtration method was developed to reduce the manual operation workload in sample preparation. In this work, m-PFC was based on multi-walled carbon nanotubes mixed with primary secondary amines and anhydrous magnesium sulfate (MgSO4) in a packed column for analysis of pesticide residues followed by ultra-performance liquid chromatography coupled with tandem mass spectrometry. Method validation was performed on 22 pesticide residues in carrot, spinach and leek, at spiked levels of 5, 10 and 50 μg/kg, respectively. The average recoveries were between 70.1 and 119.5% with associated relative standard deviations <20% (n = 6) indicating satisfactory accuracy and repeatability. Matrix-matched calibration curves were performed with the correlation coefficients (R2) higher than 0.9903 within a linearity range of 5-100 ng/mL. The limits of quantification were 5 μg/kg for all the pesticides in carrot, spinach and leek matrices. The developed method was successfully used to determine pesticide residues in market samples.

Dissipative behavior, residual pattern, and risk assessment of four pesticides and their metabolites during tea cultivation, processing and infusion

BACKGROUND

In recent years, metabolic products of pesticides have gained much attention due to their substantial characteristics as organic pollutants. So far, the behavior and metabolite levels of pesticide metabolites in crops have not been characterized well. In the present study, four registered pesticides (imidacloprid, diafenthiuron, malathion and chlorothalonil) were applied on tea plants in Fujian and Sichuan to characterize their metabolites residue pattern and dietary risk.

RESULTS

Four pesticides dissipated first-order kinetics in the fresh tea leaves with the half-lives of 1.4-3.8 days. Nine metabolites were detected in the fresh tea leaves and green tea after processing. The metabolites residues showed an increasing trend first and then declined after treatment, and reached the maximum near the half-lives of pesticide. Compared with the parent pesticide, the total residue and acute risk (included the metabolites) increased by 1.7-105.2 times. Some metabolites, especially those whose parent pesticides have high water solubility and low Log Kow, will be more easily transferred to tea infusion.

CONCLUSION

Pesticides were metabolized rapidly on tea plants after application, but the production of metabolites increased the health risk of tea consumption. These results could provide insights to use the pesticides in tea gardens and risk monitoring after application. © 2022 Society of Chemical Industry.

Dissipation and residue analysis of novel nematicide trifluorocide in ginseng and soil using modified QuEChERS method coupled with HPLC-MS/MS

In the present study, an analytical method that combined a modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) method and high-performance liquid chromatography coupled with tandem mass spectrometry was developed to determine trifluorocide in fresh and dried ginseng roots, plants (stems and leaves), and soil. At three spiked levels (0.01, 0.1, and 1.0 mg kg^-1), the mean recoveries (n = 15) of trifluorocide from fresh and dried ginseng roots, plants, and soil were in the range of 95.6 - 109.7%, with relative standard deviations less than 10.0%. The limits of quantitation of different matrices were determined to be 0.01 mg kg^-1. Dissipation and residue study of trifluorocide was conducted in ginseng cultivation ecosystems in Northeast China. The t_1/2 (half-life) of trifluorocide in ginseng fresh roots, plants, and soil were 8.3-13.1 days, 7.4-10.9 days, and 8.8-10.6 days, respectively. The terminal residues of trifluorocide in ginseng fresh roots were less than 0.01 mg kg^-1 after 35 days of trifluorocide application. This study could be beneficial in residue analysis and assist in the scientific application of trifluorocide during ginseng cultivation.

Utilizing a Rapid Multi-Plug Filtration Cleanup Method for 72 Pesticide Residues in Grape Wines Followed by Detection with Gas Chromatography Tandem Mass Spectrometry

A convenient and fast multi-residue method for the efficient identification and quantification of 72 pesticides belonging to different chemical classes in red and white grape wines has been developed. The analysis was based on gas chromatography tandem quadrupole mass spectrometric determination (GC-MS/MS). The optimization strategy involved the selection of the amount of multi-walled carbon nanotubes (MWCNTs) and the number of cleanup procedure cycles for multi-plug filtration cleanup (m-PFC) to achieve ideal recoveries and reduce the sample matrix compounds in the final extracts. The optimized procedure obtained consistent recoveries between 70.2 and 108.8% (70.2 and 108.8% for white wine, and 72.3 and 108.4% for red wine), with relative standard deviations (RSDs) that were generally lower than 9.2% at the three spiking levels of 0.01, 0.05 and 0.1 mg/kg. The linearity was studied in the range between 0.002 and 0.1 mg/kg using pesticide standards prepared both in pure solvent and in the presence of the matrix, showing coefficients of determination (R²) higher than 0.9495 for all the pesticides. To improve accuracy, matrix-matched calibration curves were used for calculating the quantification results. Finally, the method was used successfully for detecting pesticide residues in commercial grape wines.

The pesticide residue analysis in commodities with high content of chlorophyll based on the quick, easy, cheap, effective, rugged, and safe method: A review

In multiresidue analysis, the QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) is one of the most popular techniques routinely used by researchers during pesticide analysis of food and vegetable samples. Originally, the QuEChERS method was developed for analysis of pesticide residues from fruits and vegetables, but rapidly gained popularity in the extraction of analytes from different matrices. This analytical approach shows several advantages over traditional extraction techniques: it requires lower sample and solvent amounts while shortening the time of sample preparation. However, it presents some limitations for complex matrices such as those containing high amounts of chlorophyll. To overcome the problem of strong matrix effect and influence of interferences, different approaches are applied. Most are concerning modifications of the cleanup step, that is, sorbent type and its amount. Optimization of other parameters, such as sample size, hydration level, extraction solvent, and buffering, also has an impact on overall performance. Combining proper sample preparation with modern highly sensitive and selective detection techniques enables receiving desired limits of quantification. This article presents an overview of strategies employed by researchers for analysis of green, high chlorophyll content commodities and results obtained in their studies.

Review of sample preparation methods for chromatographic analysis of neonicotinoids in agricultural and environmental matrices: From classical to state-of-the-art methods

This review specifically examines the development of sample preparation methods for residue analyses of neonicotinoid insecticides in agricultural and environmental matrices. Pesticide residue analysis is fundamentally important to ensure the safety of foods and processed foods of plant and animal origin, and to preserve the environment, particularly soil and water. For the development of pesticide residue analysis, the sample preparation process is an important key to maximizing the analytical performance of highly sensitive and accurate chromatographic instruments and to acquiring reliable analytical results. This review outlines sample preparation methods that have been proposed to date for extraction of neonicotinoids that might remain in a complicated sample matrix in quantitatively trace amounts, and for cleaning up, to the greatest extent possible, the interfering components that coexist in the sample extract.

Determination and risk assessment of acrylamide in thermally processed Atractylodis Macrocephalae Rhizoma

As one of the medicine homologous foods in China, Atractylodis Macrocephalae Rhizoma (AMR) is usually distributed after thermal processing, which raised the possibility of acrylamide pollution and a potential carcinogenic risk. In this study, a method was developed for the determination of the acrylamide in AMR using graphited multiwalled carbon nanotubes as the dispersive solid phase extraction sorbent and liquid chromatography tandem mass spectrometry. The concentration of acrylamide was investigated at processing conditions of 80℃-210℃ and 5 min-100 min. Method validation results demonstrated the reliability of the method with good linearity, accuracy and precision. Significant increment of acrylamide was found in AMR after thermal processing with the highest concentration at 9826 μg/kg, which led to a margin of exposure at 90.83-181.7 according to the BMDL₁₀ of carcinogenicity at 0.17 mg/kg, indicating a high health risk of taking thermally processed AMR, and monitoring and controlling should be considered.

Determination of 12 Carbamate Insecticides in Typical Vegetables and Fruits by Rapid Multi-Plug Filtration Cleanup and Ultra-Performance Liquid Chromatography/Tandem Mass Spectrometry Detection

A multiresidue method for determining 12 carbamate pesticides in purple cabbage, orange, watermelon, cucumber, cowpea and Lactuca sativa L. employing multi-plug filtration cleanup (m-PFC) and ultra-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry (UPLC-ESI-MS/MS) was developed. M-PFC was carried out by cleanup at dispersive solid phase extraction (d-SPE), one m-PFC tip-filtration, two m-PFC tip-filtration and other methods (1-3 m-PFC cleanups). Results demonstrated that filtration simplified the cleanup method compared with d-SPE and other m-PFC methods (1-3 m-PFC cleanups). The method validation results showed that the method was linear, selective and accurate. The limits of quantification (LOQs) were 0.05-5.0 μg/kg, and the recoveries were in the range of 70.1-119.9% in different matrices. Although matrix effects were observed, they were successfully compensated using matrix-matched calibration. Finally, the developed method was successfully applied to detect pesticides in real samples.

Comparison of Sin-QuEChERS Nano and d-SPE Methods for Pesticide Multi-Residues in Lettuce and Chinese Chives

In this study, a new rapid cleanup method was developed for the analysis of 111 pesticide multi-residues in lettuce and Chinese chives by GC-MS/MS and LC-MS/MS. QuEChERS (quick, easy, cheap, effective, rugged and safe)-based sample extraction was used to obtain the extracts, and the cleanup procedure was carried out using a Sin-QuEChERS nano cartridge. Comparison of the cleanup effects, limits of quantification and limits of detection, recoveries, precision and matrix effects (MEs) between the Sin-QuEChERS nano method and the classical dispersive solid phase extraction (d-SPE) method were performed. When spiked at 10 and 100 μg/kg, the number of pesticides with recoveries between 90% to 110% and relative standard deviations < 15% were greater when using the Sin-QuEChERS nano method. The MEs of Sin-QuEChERS nano and d-SPE methods ranged between 0.72 to 3.41 and 0.63 to 3.56, respectively. The results verified that the Sin-QuEChERS nano method was significantly more effective at removing pigments and more convenient than the d-SPE method. The developed method with the Sin-QuEChERS nano cleanup procedure was applied successfully to determine pesticide residues in market samples.

Development and evaluation of an automated multi-channel multiplug filtration cleanup device for pesticide residue analysis on mulberry leaves and processed tea

An automated multi-channel multiplug filtration cleanup (m-PFC) device was designed and developed. m-PFC columns were suitably installed in the device. The cycle times, speed and nitrogen pressure parameters of the m-PFC column were optimized. The device was utilized to analyze the 82 pesticide residues in fresh mulberry leaves and processed tea with GC-MS/MS detection. Method validation was performed on 82 pesticide residues in fresh mulberry leaves and processed tea at spiked levels of 0.01, 0.05 and 0.5 mg kg⁻¹. The fortified recoveries of 82 pesticides were 72–115% and the relative standard deviations were 1–15%, except for diniconazole and clodinafop-propargyl in mulberry leaves. The automated multi-channel m-PFC device was successfully applied to detect the pesticide residues in fresh mulberry leaves and processed tea samples. With comparison to the conventional QuEChERS method, the current method using this device did not need additional vortex or centrifugation steps, and could process 48–64 samples in about one hour. The automated m-PFC method saved labor and improved the precision and was shown to be efficient and practical in pesticide residue analysis.

An automated device based on QuEChERS cleanup was developed, which is simple, fully automated, highly precise and highly efficient.

Simultaneous Determination of Five Diamide Insecticides in Food Matrices Using Carbon Nanotube Multiplug Filtration Cleanup and Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

In this study, an analytical method was developed and validated for simultaneous determination of five diamide insecticides (chlorantraniliprole, cyantraniliprole, flubendiamide, cyclaniliprole, and tetrachlorantraniliprole) in food matrices. Determination of the latter two diamide compounds is first reported. Samples were cleaned up by multiplug filters containing carbon nanotubes (CNT) or hydrophilic-lipophilic balanced copolymers (HLB) and classic dispersive solid phase extraction (d-SPE) procedures, respectively. The CNT multiplug filter performed the best in terms of process rapidity and cleanup efficiency; thus, it was finally chosen for sample cleanup. Instrumental analysis was completed in 5 min using ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Mean recoveries of the five diamides ranged from 84.3 to 110.0%, with intraday and interday relative standard deviations (RSD) of less than 13.5%. Limits of quantitation (LOQ) of all analytes ranged from 0.005 to 0.01 mg kg^-1 in different matrices. The results indicate this method is reliable for monitoring the five diamide insecticides in various foods.

Residue Analysis of 60 Pesticides in Red Swamp Crayfish Using QuEChERS with High-Performance Liquid Chromatography-Tandem Mass Spectrometry

In this study, a multi-residue analytical method using quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction and dispersive solid-phase extraction (d-SPE) cleanup, followed by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), was investigated for rapid determination of 60 pesticide residues in whole crayfish and crayfish meat. The final method used 10 mL of acetonitrile for extraction, 3 g of NaCl for partitioning, and 50 mg of primary secondary amine for d-SPE cleanup. The method was validated at three spiking levels (10, 50, and 100 ng/g) using triphenyl phosphate as an internal standard and both gradient and isocratic HPLC elution. Under gradient conditions, satisfactory recoveries (70-120%) and relative standard deviations of ≤20% were achieved for 83 and 88% of pesticides in whole crayfish and crayfish meat, respectively. Matrix effects were estimated using both gradient and isocratic HPLC elution. To our knowledge, this is the first study involving multi-residue analysis of HPLC-amenable pesticides in crayfish and mantis shrimp. The final method was successfully applied for analysis of 11 crayfish and mantis shrimp samples from markets in China, and propamocarb (<limit of quantitation) and difenoconazole (8 ng/g) were detected in two different mantis shrimps.

Simultaneous determination of neonicotinoid insecticides and insect growth regulators residues in honey using LC-MS/MS with anion exchanger-disposable pipette extraction

In this study, we developed an anion exchanger-disposable pipette extraction (DPX) method to detect the residual concentrations of eight neonicotinoid insecticides (dinotefuran, acetamiprid, clothianidin, thiacloprid, imidachloprid, imidaclothiz, nitenpyram, and thiamethoxam) and eight insect growth regulators (IGRs; triflumuron, cyromazine, buprofezin, methoxyfenozide, tebufenozide, chromafenozide, fenoxycarb, and RH 5849) in Chinese honey samples collected from different floral sources and different geographical regions using liquid chromatography tandem mass spectrometry (LC-MS/MS). QAE Sephadex A-25 was used as the anion exchanger in the DPX column for the purification and cleanup of honey samples. Analytes were eluted with a mixture of acetonitrile and 0.1 M HCl, and the elution was subjected to LC analysis. This method was thoroughly validated for its reproducibility, linearity, trueness, and recovery. Satisfactory recovery of pesticides was obtained ranging from 72% to 111% with intraday RSDs (n = 5) of 1%-10%. High linearity (R² ≥ 0.9987) was observed for all 16 pesticides. Limits of detection and quantification for all 16 compounds ranged from 0.3 to 3 μg/kg and from 1 to 10 μg/kg, respectively. Pesticide residues (9-113 μg/kg) were found in Chinese honey samples. The anion exchanger-DPX method was effective for removing sugars and retaining target analytes. Moreover, this method was highly reliable and sensitive for detecting neonicotinoids and IGRs in different floral sources of honey and will be applicable to matrixes with high sugar content.

Comparison between dispersive solid-phase and dispersive liquid-liquid microextraction combined with spectrophotometric determination of malachite green in water samples based on ultrasound-assisted and preconcentration under multi-variable experimental design optimization

The ultrasound-assisted dispersive solid-phase microextraction (USA-DSPME) and the ultrasound-assisted dispersive liquid-liquid microextraction (USA-DLLME) developed for as an ultra preconcentration and/or technique for the determination of malachite green (MG) in water samples. Central composite design based on analysis of variance and desirability function guide finding best operational conditions and represent dependency of response to variables viz. volume of extraction, eluent and disperser solvent, pH, adsorbent mass and ultrasonication time has significant influence on methods efficiency. Optimum conditions was set for USA-DSPME as: 1mg CNTs/Zn:ZnO@Ni₂P-NCs; 4min sonication time and 130μL eluent at pH 6.0. Meanwhile optimum point for USA-DLLME conditions were fixed at pH 6.0; 4min sonication time and 130, 650μL and 10mL of extraction solvent (CHCl₃), disperser solvent (ethanol) and sample volume, respectively. Under the above specified best operational conditions, the enrichment factors for the USA-DSPME and USA-DLLME were 88.89 and 147.30, respectively. The methods has linear response in the range of 20.0 to 4000.0ngmL^-1 with the correlation coefficients (r) between 0.9980 to 0.9995, while its reasonable detection limits viz. 1.386 to 2.348ngmL^-1 and good relative standard deviations varied from 1.1% to 2.8% (n=10) candidate this method for successful monitoring of analyte from various media. The relative recoveries of the MG dye from water samples at spiking level of 500ngmL^-1 were in the range between 94.50% and 98.86%. The proposed methods has been successfully applied to the analysis of the MG dye in water samples, and a satisfactory result was obtained.

Simultaneous determination of 124 pesticide residues in Chinese liquor and liquor-making raw materials (sorghum and rice hull) by rapid Multi-plug Filtration Cleanup and gas chromatography-tandem mass spectrometry

A multi-residue method was developed for the determination of 124 pesticide residues in Chinese liquor and liquor-making raw materials (sorghum and rice hull) by rapid Multi-plug Filtration Cleanup (m-PFC) and GC-MS/MS detection. Different combination and proportion sets of sorbents were initially optimized for each matrix with adispersive solid-phase extraction (d-SPE) procedure. Satisfactory linearity was obtained for the 124 pesticides with regression coefficients (R²) greater than 0.9901. Mean recoveries of 121 pesticides were in the range of 71-121% with Relative Standard Deviations (RSDs) lower than 16.8% except cyprodinil, diflufenican and prothioconazole. The Limit of Quantification (LOQs) was in the range of 1.0×10^-4-5.0×10^-3mgkg^-1 and the Limit of Detection (LODs) ranged from 3.0×10^-5 to 1.5×10^-3mgkg^-1 for the 124 pesticides in the matrices. It is demonstrated the m-PFC procedure is superior to the d-SPE method and it could be used to routinely monitor of pesticide residues in market samples.

Automated multi-filtration cleanup with nitrogen-enriched activated carbon material as pesticide multi-residue analysis method in representative crop commodities

An automated multi-filtration cleanup (Auto m-FC) method with nitrogen-enriched activated carbon material based on modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) extracts was developed. It was applied to pesticide multi-residue analysis in six representative crop commodities. The automatic device was aimed to improve the cleanup efficiency and reduce manual operation workload in cleanup step. By controlling extracts volume, flow rate and Auto m-FC cycles, the device could finish cleanup process accurately. In this work, nitrogen-enriched activated carbon mixed with alternative sorbents and anhydrous magnesium sulfate (MgSO₄) was packed in a column for Auto m-FC and followed by liquid chromatography with tandem mass spectrometric (LC-MS/MS) detection. This newly developed carbon material showed excellent cleanup performance. It was validated by analyzing 23 pesticides in six representative matrices spiked at two concentration levels of 10 and 100μg/kg. Water addition volume, salts, sorbents, Auto m-FC procedure including the flow rate and the Auto m-FC cycles for each matrix were optimized. Then, three general Auto m-FC methods were introduced to high water content, high oil and starch content, difficult commodities. Spike recoveries were within 82 and 106% and 1-14% RSD for all analytes in the tested matrices. Matrix-matched calibrations were performed with the coefficients of determination over 0.997 between concentration levels of 10 and 1000μg/kg. The developed method was successfully applied to the determination of pesticide residues in market samples.

Magnetic graphene coated inorganic-organic hybrid nanocomposite for enhanced preconcentration of selected pesticides in tomato and grape

The new magnetic graphene based hybrid silica-N-[3-(trimethoxysilyl)propyl]ethylenediamine (MG@SiO₂-TMSPED) nanocomposite was synthesized via sol-gel process, and used as an effective adsorbent in magnetic solid phase extraction (MSPE) of three selected pesticides followed by gas chromatography micro-electron capture detection (GC-μECD). The adsorbent was characterized using Fourier transform-infrared spectroscopy (FT-IR), Brunauer-Emmett-Teller (BET), Barrett-Joyner-Halenda (BJH), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDXS) techniques. The analytical validity of the developed method was evaluated under optimized conditions and the following figures of merit were obtained: linearity, 1-20μgkg^-1 with good determination coefficients (R²=0.995-0.999); limits of detection (LODs), 0.23-0.30μgkg^-1 (3×SD/m, n=3); and limits of quantitation (LOQ), 0.76-1.0μgkg^-1 (10×SD/m, n=3). The precision (RSD%) of the proposed MSPE method was studied based on intra-day (3.43-8.83%, n=3) and inter-day (6.68-8.37%, n=12) precisions. Finally, the adsorbent was applied to determination of pesticides in tomato and grape samples and good recoveries were obtained in the range from 82 to 113% (RSDs 5.1-8.1%, n=3).

Analysis of sulfonamides, tilmicosin and avermectins residues in typical animal matrices with multi-plug filtration cleanup by liquid chromatography-tandem mass spectrometry detection

The frequent use of various veterinary drugs could lead to residue bioaccumulation in animal tissues, which could cause dietary risks to human health. In order to quickly analyze the residues, a liquid chromatography tandem mass spectrometry (LC-MS/MS) method was developed for detecting Sulfonamides, Tilmicosin and Avermectins (AVMs) residues in animal samples. For sample preparation, modified QuEChERS (quick, easy, cheap, effective, rugged and safe) and ultrasound-assisted extraction (UAE) methods were used. For sample cleanup, n-Hexane delipidation and multi-plug filtration cleanup (m-PFC) method based on primary-secondary amine (PSA) and octadecyl-silica (C18) were used, followed by LC-MS/MS analysis. It was validated on 7 animal matrices (bovine, caprine, swine meat and their kidneys, milk) at two fortified concentration levels of 5 and 100μg/kg. The recoveries ranged from 82 to 107% for all analytes with relative standard deviations (RSDs) less than 15%. Matrix-matched calibrations were performed with coefficients of determination above 0.998 for all analytes within concentration levels of 5-500μg/kg. The developed method was successfully used to analysis veterinary drugs of real animal samples from local markets.

Study on Mobility, Distribution and Rapid Ion Mobility Spectrometry Detection of Seven Pesticide Residues in Cucumber, Apple, and Cherry Tomato

This research explores the mobility and distribution rules of simazine, acetamiprid, hexazinone, paclobutrazol, amitraz, clofentezine, and boscalid in the pulp and peel of apple, cucumber, and cherry tomato. A laboratory test was carried out by treating the matrices with standard solution for different periods of time. The percentage sorption of pesticides ranged from 0.02 to 89.3% for the three matrices. The pesticides' distribution was also determined, and all pesticides showed ratio values (Q) between pulp and peel concentrations in the three matrices of <0.8, which proved that the highest pesticides' content was found in the peel. In addition, a rapid and simple process combining a surface swab capture method and pulse glow discharge-ion mobility spectrometry (PGD-IMS) detection was established for the detection of pesticides on matrix surfaces. In the swab method, the whole matrix surface was swabbed manually by swab sticks, and swab sticks were agitated in acetonitrile to release the pesticides. The releasing factors of pesticides in the three matrices were calculated. The linearity, LOD, LOQ, and matrix effect were investigated to assess the applicability of the swab-IMS process in practical analysis. The swab-IMS method is rapid, sensitive, and quantitative and can be achieved in the field.

Dissipation and metabolism of tebufenozide in cabbage and soil under open field conditions in South China

The novel nonsteroidal ecdysone agonist tebufenozide is capable of controlling a wide range of lepidopteran pests. However its intensive use in vegetables has raised concerns towards the safety of food and environment. Here, we developed an easy and reliable method to analyze tebufenozide in cabbage and soil by reversed-phase high performance liquid chromatography (HPLC). The average recoveries of tebufenozide ranged from 72.01% to 101.10% with the relative standard deviations (RSD)<6%, and the LOD and LOQ were 0.02µgg^-1 and 0.05µgg^-1, respectively. According to the dissipation study, the half-lives of tebufenozide were 2.96 and 4.08 d in cabbage and 4.95-7.70d in soil, respectively. The final residues were determined below the maximum residue limit (MRL) (0.5mgkg^-1) after a pre-harvest interval (PHI) of 7d. Moreover, its major metabolites were identified by liquid chromatography tandem mass spectrometry (LC-MS/MS) on LTQ-Orbitrap XL, which leading to the first report of the degradation pathway of tebufenozide in cabbage. The present study is expected to provide basic data for the use guidance and safety evaluation of tebufenozide in agricultural crops and environment.