Determination of alkylphenols in water samples using liquid chromatography–tandem mass spectrometry after pre-column derivatization with dansyl chloride

Simultaneous analysis of advanced glycation end products using dansyl derivatization

Herein, new pre-column derivatization based on dansylation is present to resolve analytical difficulties, such as chromatographic separation difficulty, in identifying and quantifying advanced glycation end products (AGEs) owing to their high hydrophilicity, wide variety, and structural similarity. The proposed analytical method facilitated the separation of 14 AGEs, including structural isomers. Limits of detection of 1.0-43.3 ng/mL and linear ranges of the double- or triple-digit were achieved. Intra- and inter-day precisions of 1.1-3.0% and 1.3-3.1%, respectively, were achieved for standard solutions, while those for food specimens were 1.4-11.2% and 1.7-15.7%, respectively. The matrix effect was insignificant with regard to the percent recoveries and differences between slopes for both the standard solutions and food specimens. Furthermore, the quantitation results of AGEs in foods (coffee, beer, and sausage) and glycated proteins revealed the potential applicability of the developed method in various fields of food chemistry and biochemistry.

Endocrine disrupting chemicals in the environment: Environmental sources, biological effects, remediation techniques, and perspective

Endocrine disrupting chemicals (EDCs) have been identified as emerging contaminants, which poses a great threat to human health and ecosystem. Pesticides, polycyclic aromatic hydrocarbons, dioxins, brominated flame retardants, steroid hormones and alkylphenols are representative of this type of contaminant, which are closely related to daily life. Unfortunately, many wastewater treatment plants (WWTPs) do not treat EDCs as targets in the normal treatment process, resulting in EDCs entering the environment. Few studies have systematically reviewed the related content of EDCs in terms of occurrence, harm and remediation. For this reason, in this article, the sources and exposure routes of common EDCs are systematically described. The existence of EDCs in the environment is mainly related to human activities (Wastewater discharges and industrial activities). The common hazards of these EDCs are clarified based on available toxicological data. At the same time, the mechanism and effect of some mainstream EDCs remediation technologies (such as adsorption, advanced oxidation, membrane bioreactor, constructed wetland, etc.) are separately mentioned. Moreover, our perspectives are provided for further research of EDCs.

Multi-residue determination of bisphenol analogues in organism tissues by ultra-high performance liquid chromatography-tandem mass spectrometry

A reliable and sensitive analyzing method was developed and validated for determination of 13 novel bisphenol analogues (BPs) along with bisphenol A (BPA) in organism tissues. The complex organism tissues were treated by ultrasonic-assisted extraction using acetonitrile/formic acid (99:1, v/v), followed by successive purification using enhanced matrix removal-lipid sorbents and primary secondary amine sorbents. The BPs were finally determined by ultra-high performance liquid chromatography-tandem mass spectrometry after derivatization using pyridine-3-sulfonyl chloride. Satisfactory recoveries of 75 - 118% were obtained for the BPs, with good repeatability (RSD < 20%). Matrix interferences were efficiently diminished. The method quantification limits (MQLs) reached 0.003 - 0.1 ng g^-1 dry weight (dw). The validated method was successfully applied to a preliminary investigation of the BPs in wild marine organisms collected from the nearshore waters along the coast of Guangdong, China. Besides BPA, novel BPs such as bisphenol F, bisphenol AF, and tetrabromobisphenol A were also detected at < MDL - 15.5 ng g^-1 dw. This work laid a strong basis for further in-depth research on bioaccumulation of the novel BPs in the environment.

Determination of trace concentrations of simple phenols in ambient PM samples

Phenols are hazardous, but yet ubiquitous in the environment, including in atmospheric aerosols due to combustion emissions. There, phenols are subjected to secondary transformations, producing even more toxic nitrophenolic air pollutants. However, primary simple phenols, i.e. those containing only hydroxyl, methyl and methoxy substituents are not easy to detect. Trace concentrations, semi-volatile character and poorly ionizable functional groups prevent us from their determination by the most common analytical techniques, such as gas and liquid chromatography with mass spectrometric detection (GC/LC-MS). Here, we present a new derivatization method for MS/MS detection with positive ion electrospray ionization (+ESI-MS/MS) of simple phenols in atmospheric particulate matter (PM) extracts. The method is sensitive, selective, and robust, and requires no sample concentration step, which is critical due to the volatile character of the target analytes. After derivatization with dansyl chloride, phenol, catechol, cresols and guaiacol were detected in urban PM samples from Ljubljana, Slovenia. This method finally enables to study the abundance of primary phenols in atmospheric PM from different sources, which will improve understanding of secondary aerosol (trans)formation pathways and allow for more targeted mitigation strategies in respect to airborne phenolic pollutants.

Analysis of alkylphenols, bisphenols and alkylphenol ethoxylates in microbial-fermented functional beverages and bottled water: Optimization of a dispersive liquid-liquid microextraction protocol based on natural hydrophobic deep eutectic solvents

In this work, the analysis of alkylphenols, bisphenols and alkylphenol ethoxylates in bottled waters, kombuchas and water kefir was performed through a vortex-assisted dispersive liquid-liquid microextraction method based on a natural hydrophobic eutectic solvent. For this purpose, mixtures of monoterpenes and fatty acids were employed. Different factors affecting extraction were optimized and the method was validated in terms of matrix effect, linearity, limits of detection and recovery. Recovery values varied between 70.0 and 124.3% (except for 4-tert-butylphenol: 67.0% and 4-n-nonylphenol: 60.8% in water kefir) and limits of detection were in the range 0.10 ng/L - 2.99 µg/L. Finally, 8 bottled waters, 8 kombuchas and 4 water kefirs were analyzed and 4-tert-octylphenol monoethoxylate was detected in water (20.28 ± 0.99 - 62.08 ± 3.63 µg/L). This is the first application analyzing xenobiotic contaminants in kombucha and water kefir and the first time in which the three types of compounds are simultaneously extracted by dispersive liquid-liquid microextraction.

The Influence of Biomolecule Composition on Colloidal Beer Structure

Recent studies have revealed an interest in the composition of beer biomolecules as a colloidal system and their influence on the formation of beer taste. The purpose of this research was to establish biochemical interactions between the biomolecules of plant-based raw materials of beer in order to understand the overall structure of beer as a complex system of bound biomolecules. Generally accepted methods of analytical research in the field of brewing, biochemistry and proteomics were used to solve the research objectives. The studies allowed us to establish the relationship between the grain and plant-based raw materials used, as well as the processing technologies and biomolecular profiles of beer. The qualitative profile of the distribution of protein compounds as a framework for the formation of a colloidal system and the role of carbohydrate dextrins and phenol compounds are given. This article provides information about the presence of biogenic compounds in the structure of beer that positively affect the functioning of the body. A critical assessment of the influence of some parameters on the completeness of beer taste by biomolecules is given. Conclusion: the conducted analytical studies allowed us to confirm the hypothesis about the nitrogen structure of beer and the relationship of other biomolecules with protein substances, and to identify the main factors affecting the distribution of biomolecules by fractions.

The dose effect of dansyl chloride on the derivative products of bisphenols and its application for the determination of bisphenols in human serum by high-performance liquid chromatography-tandem mass spectrometry

Human exposure to bisphenols has rarely been reported. The most important challenges in this regard are the sensitivity and accuracy of the analytical methods employed. Dansyl chloride derivatization prior to high-performance liquid chromatography-tandem mass spectrometry has been prevalently employed to improve sensitivity. However, the dose effect of the derivatization reagent on the reaction products is not well understood, especially for reactants with two or more active groups. This study investigated the mass ratio of dansyl chloride to bisphenols and found the mass ratio played a vital role in changing the composition of derivatives; further, the optimal ratio for obtaining di-substituted derivatives was confirmed. Under optimal conditions, solid-phase extraction followed by dansyl chloride derivatization coupled with high-performance liquid chromatography-tandem mass spectrometry was used to detect eight bisphenols in human serum samples. The method detection limits of the eight bisphenols were 0.025-0.28 ng/mL, and the recoveries were 72.9-121.7% by spiking bisphenols (2, 5, and 20 ng/mL) into bovine serum. The detection frequencies of bisphenol A and bisphenol F in 73 serum samples obtained from children from Guangzhou were 41.1% and 71.2%, respectively, while the detection frequencies of other bisphenols were below 20%. The concentrations of bisphenol A and bisphenol F were < 0.28-8.0 ng/mL and < 0.028-7.6 ng/mL, respectively.

Characterisation, release and migration of phenolic compounds from resoles used in polyester-phenol coatings intended for food contact materials

Resoles are multifarious pre-polymeric resins produced by the condensation of basic chemicals phenols, formaldehyde and optionally aliphatic alcohols like butanol. They are widely used as cross-linkers to form resistant internal coatings on metal surfaces of cans, containers or closures. Although the application of resoles is common in food contact, usually little is known about their exact composition, the toxicological hazards of their individual constituents and the migration of phenolic compounds, e.g., of the potentially endocrine-disrupting chemical bisphenol F. Our study fills major gaps of knowledge in risk assessment, using the example of a two-layer polyester-phenol coating system, which is based on three different resoles and is commercially used for closures of infant food glass jars. Various analytical approaches, namely size-exclusion chromatography, nuclear magnetic resonance spectroscopy, liquid chromatography coupled to mass spectrometry, fluorescence and diode array detection as well as gas chromatography-mass spectrometry were evaluated to quantitatively characterise resoles. Additionally, derivatisation with dansyl chloride as well as Folin-Ciocalteu colorimetric assay was adapted first times to determine the total phenol content from technical resoles. Individual mono- and bisphenols were determined in resoles up to about 120 mg/g, while the concentration of bisphenol F isomers was below 10 mg/g. Migration from the coating system was determined after sterilisation (121°C, 1 h, 20% ethanol). Results were ~2 µg/dm2 for identified individual mono-phenols like 2-hydroxybenzyl alcohol and up to ~120 µg/dm2 for total phenolic compounds, representing approximately 7% of the overall migration. The migration of bisphenol F isomers was negligible below 0.3 µg/dm2. Potential exposure to migrating phenols was assessed based on the threshold of toxicological concern concept to be significantly below for individual phenols and in the same order of magnitude for total phenols compared to the respective thresholds calculated for infants.

Worldwide bottled water occurrence of emerging contaminants: A review of the recent scientific literature

Contaminants of emerging concern (CECs) have recently been detected in bottled water and have brought about discussions on possible risks for human health. However, a systematic review of CECs in bottled water is currently lacking due to the relatively new introduction and/or detection of these pollutants. Hence, this paper reviews the existing studies on the presence of six major groups of emerging contaminants including microplastics (MPs), pharmaceuticals and personal care products (PPCPs), bisphenol A (BPA), phthalates, alkylphenols (APs), and perfluoroalkyl and polyfluoroalkyl substances (PFASs) in bottled water from different countries. Also, the findings related to CECs' levels, their possible sources, and their risks are summarized. The gathered data indicate that MPs within the size range of 1-5 μm are the most predominant and potentially toxic classes of MPs in bottled water. In addition, PPCPs, PFASs, APs, and BPA occur in concentration levels of ng/L, while phthalates occur in the μg/L level in bottled water. The bottle type plays an important role in the contamination level. As expected, water in plastic bottles with plastic caps is more polluted than in glass bottles. However, other sources of contamination such as contact materials during cleaning, bottling, and storage are not negligible. Based on the gathered data in this review, the CEC levels except for MPs (no threshold values) in bottled water of most countries do not raise a safety concern for the human. However, the occurrence of individual CECs and their association in bottled water need more accurate data to understand their own/synergistic effects on human health.

Development of an innovative phytosterol derivatization method to improve the HPLC-DAD analysis and the ESI-MS detection of plant sterols/stanols

HPLC analyses of phytosterols are associated with the issues of sensitivity due to their high lipophilicity and their lack of chromophore. These problems could be solved through chemical modifications of plant sterols/stanols structures. Therefore, the present study aims to develop a new method for phytosterols derivatization. This method was performed using dansyl chloride (4 mg ml^-1) as derivatizing agent and different reaction parameters have been optimized. The highest yields of phytosterol derivatization were obtained with 4-dimethylaminopyridine (DMAP) as catalyst at a concentration of 8 mg ml^-1 and dichloromethane as reaction solvent. In addition, 40 ˚C was the best reaction temperature for 30 min as the best reaction time. This derivatization method presented a high reproducibility (%RSD = 1.2-2.7%) and a good linearity (R² = 0.9982-0.9999). The UV absorption intensities after derivatization showed a 23-fold increment for plant sterols and a 400-fold increment for plant stanols. Moreover, this derivatization method allowed the use of high and more selective wavelengths of detection and improved the chromatographic separation of phytosterols. Furthermore, the developed method allowed the ESI-MS ionization and analysis of phytosterols. This method can therefore contribute to the improvement of the HPLC analyses of plant sterols/stanols.

Analysis of Non-Ionic Surfactant Triton X-100 Using Hydrophilic Interaction Liquid Chromatography and Mass Spectrometry

It is well known that surfactants increase the solubility of hydrophobic organic compounds and cause adverse environmental effects. The removal of these compounds from the contaminated soil or ground-water is particularly difficult due to their water soluble feature. In this work, an ultra-high performance hydrophilic interaction liquid chromatographic method was developed for the separation of oligomers of Triton X-100 octylphenol-polyethoxylate non-ionic surfactant. Liquid chromatography-mass spectrometry (LC-MS) was used to identify the Triton X-100 compounds. There was a 44 mass unit difference between two adjacent peaks that is the molar mass of one ethylene oxide group (–CH2CH2O–). A quadratic retention model was applied for the estimation of retention of the examined non-ionic surfactant and the optimization of gradient elution conditions. The optimized method was suitable for the baseline separation of 28 Triton X-100 oligomers in five minutes.

Endocrine-disrupting metabolites of alkylphenol ethoxylates - A critical review of analytical methods, environmental occurrences, toxicity, and regulation

Despite the fact that metabolites of alkylphenol ethoxylates (APEO) are classified as hazardous substances, they continue to be released into the environment from a variety of sources and are not usually monitored. Their wide use has led to an increase in the possible exposure pathways for humans, which is cause for alarm. Moreover, there is a lack of knowledge about the behaviour of these metabolites with respect to the environment and toxicity, and their biological effects on human health. The aim of this work is to give an overview of the APEO metabolites and their analysis, occurrences and toxicity in various environmental and human samples. APEO metabolites have adverse effects on humans, wildlife, and the environment through their release into the environment. Currently, there are some reviews available on the behaviour of alkylphenols in soil, sediments, groundwater, surface water and food. However, none of these articles consider their toxicity in humans and especially their effect on the nervous and immune system. This work summarises the environmental occurrences of metabolites of APEOs in matrices, e.g. water, food and biological matrices, their effect on the immune and nervous systems, and isomer-specific issues. With that emphasis we are able to cover most common occurrences of human exposure, whether direct or indirect.

Estrogenic activity and contributing compounds in stagnant water bodies with massive occurrence of phytoplankton

Stagnant water bodies have generally received little attention regarding the presence of endocrine disruptive compounds, although they can integrate diverse pollutants from multiple different sources. Many compounds of anthropogenic as well as natural origin can contribute to the overall estrogenicity of surface waters and some of them can exhibit adverse effects on aquatic biota even in very low concentrations. This study focused on freshwater ponds and reservoirs affected by water blooms and determined the estrogenic activity of water by in vitro bioassay as well as concentrations of several important groups of estrogenic compounds (estrogenic hormones, alkylphenols, and phytoestrogens) by LC-MS/MS analyses. Estrogenic hormones were found at concentrations up to 7.1 ng.L^-1, similarly to flavonoids, whose concentrations did not exceed 12.5 ng.L^-1. Among alkylphenols, only bisphenol A and 4-tert-octylphenol were detected in levels reaching 100 ng.L^-1 at maximum. Estrogenic activity of water samples varied from below the quantification limit to 1.95 ng.L^-1. There does not seem to be any general causal link of the massive phytoplankton occurrence with the estrogenicity of water or concentration of phytoestrogens, since they showed no direct relationship with the phytoplankton abundance or composition across sites. The contribution of the analysed compounds to the estrogenic activity was calculated in three scenarios. In minimum scenario, just the compounds above quantification limit (LOQ) were taken into account and for most samples, only minor part (<6%) of the biological activity could be explained. In the mean and maximum scenarios, we included also compounds below LOQ into the calculations at the level of LOQ/2 and LOQ, respectively. In these cases, a considerable part of the estrogenic activity could be attributed to the possible presence of steroid estrogens below LOQ. However, for the samples with estrogenic activity greater than 1 ng.L^-1, more than 50% of the estrogenic activity remained unexplained even in the maximum scenario. Probably other compounds or possible interactions between individual substances cause the estrogenic activity in these types of water bodies and in this case, the results of LC-MS/MS analyses cannot sufficiently predict the biological effects. A complex approach including bioassays is needed when assessing the estrogenicity of these types of surface waters.

Solid phase extraction with high polarity Carb/PSA as composite fillers prior to UPLC-MS/MS to determine six bisphenols and alkylphenols in trace level hotpot seasoning

The present study reports an ultra high-performance liquid chromatography tandem mass spectrometry method for the simultaneous determination of six bisphenols (bisphenol A, bisphenol B and bisphenol F) and alkylphenols (4-nonylphenol, 4-n-nonylphenol and octylphenol) in hotpot seasoning. Samples were dispersed in n-hexane after addition of internal standards bisphenol A-d₄ and 4-n-nonylphenol-d₄. Sample solutions were then centrifuged, and the supernatants purified using solid phase extraction with high polarity Carb/PSA composite fillers. Six target analytes were separated on a Waters ACQUITY BEH C18 column by gradient elution with methanol and 0.05% ammonium hydroxide in water as the mobile phase, and determined under multiple reactions monitoring mode. The limits of detection and quantitation, matrix effect, recovery and precision of the method were investigated. Results were linear in the concentration range 0.1-250 µg/L for all compounds of interest, with R² > 0.9950. Limits of detection were in the range 0.1-0.4 μg/kg, and limits of quantitation were between 0.5 μg/kg and 1.0 μg/kg. The mean recoveries for negative samples at three spiked concentrations were in the range 87.9%-102.4%, and the intra-day precision and inter-day precision were in the ranges 2.1-8.2% and 4.8-11.2%, respectively. This method is accurate and sensitive, and had good clean-up characteristics, which might apply to screening and quantitation of target bisphenols and alkylphenols in hotpot seasoning.

Simultaneous identification and quantification of bisphenol A and 12 bisphenol analogues in environmental samples using precolumn derivatization and ultra high performance liquid chromatography with tandem mass spectrometry

A method for the identification and quantification of bisphenol A and 12 bisphenol analogues in river water and sediment samples combining liquid-liquid extraction, precolumn derivatization, and ultra high-performance liquid chromatography coupled with tandem mass spectrometry was developed and validated. Analytes were extracted from the river water sample using a liquid-liquid extraction method. Dansyl chloride was selected as a derivatization reagent. Derivatization reaction conditions affecting production of the dansyl derivatives were tested and optimized. All the derivatized target compounds were well separated and eluted in 10 min. Dansyl chloride labeled compounds were analyzed using a high-resolution mass spectrometer with electrospray ionization in the positive mode, and the results were confirmed and quantified in the parallel reaction monitoring mode. The method validation results showed a satisfactory level of sensitivity. Linearity was assessed using matrix-matched standard calibration, and good correlation coefficients were obtained. The limits of quantification for the analytes ranged from 0.005 to 0.02 ng/mL in river water and from 0.15 to 0.80 ng/g in sediment. Good reproducibility of the method in terms of intra- and interday precision was achieved, yielding relative standard deviations of less than 10.1 and 11.6%, respectively. Finally, this method was successfully applied to the analysis of real samples.

Rapid and sensitive determination of multiple endocrine-disrupting chemicals by ultrasound-assisted in situ derivatization dispersive liquid-liquid microextraction coupled with ultra-high-performance liquid chromatography/tandem mass spectrometry

RATIONALE

Endocrine-disrupting chemicals (EDCs) in environment samples and food stuffs are an increasing serious public health issue due to their potency to interfere and deregulate several aspects of the endocrine system. Because of their extremely low abundance, it remains a challenging task to develop a sensitive detection method.

METHODS

4'-Carbonyl chloride rosamine (CCR) was used as a derivatization reagent for EDCs for the first time. A new ultrasound-assisted in situ derivatization/dispersive liquid-liquid microextraction (UA-DLLME with in situ derivatization) method for multiple EDCs including five estrogens, two alkylphenols, eight bisphenols, seven parabens and triclosan coupled with ultra-high-performance liquid chromatography/tandem mass spectrometry (UHPLC/MS/MS) has been developed and validated.

RESULTS

The ionization efficiency of EDCs was greatly enhanced through the introduction of a permanent charged moiety of CCR into the derivatives during electrospray ionization (ESI)-MS analysis. The main variables potentially affecting the UA-DLLME with in situ derivatization process are optimized. The recoveries and matrix effects of 23 EDCs for the spiking samples were in the range of 83.0-116.0% and 85.8-114.6%, respectively. Good method reproducibility was achieved.

CONCLUSIONS

The limits of detection (LODs) for 23 EDCs were 0.05-0.40 ng/L and 0.03-0.25 ng/g (dry weight, d.w.) for environment samples and food stuffs, respectively. The proposed method has been demonstrated to be suitable for simultaneous determination of multiple EDCs in real samples with high sensitivity, speediness, and good sample clean-up ability. Copyright © 2017 John Wiley & Sons, Ltd.

Drinking water contaminants from epoxy resin-coated pipes: A field study

Rehabilitation of aged drinking water pipes is an extensive renovation and increasingly topical in many European cities. Spray-on-lining of drinking water pipes is an alternative cost-effective rehabilitation technology in which the insides of pipes are relined with organic polymer. A commonly used polymer is epoxy resin consisting of monomer bisphenol A (BPA). Leaching of BPA from epoxy lining to drinking water has been a concern among public and authorities. Currently epoxy lining is not recommended in some countries. BPA leaching has been demonstrated in laboratory studies but the behavior and ageing process of epoxy lining in situ is not well known. In this study 6 locations with different age epoxy linings of drinking water pipes done using two distinct technologies were studied. While bisphenol F, 4-n-nonylphenol, and 4-t-octylphenol were rarely found and in trace concentrations, BPA was detected in majority of samples. Pipes lined with the older technology (LSE) leached more BPA than those with more recent technology (DonPro): maxima in cold water were 0.25 μg/L and 10 ng/L, respectively. Incubation of water in pipes 8-10 h prior to sampling increased BPA concentration in cold water 1.1-43-fold. Hot water temperature caused even more BPA leaching - at maximum 23.5 μg/L. The influence of ageing of epoxy lining on BPA leaching on could be shown in case of LSE technology: locations with 8-9 years old lining leached 4-20-fold more BPA compared to a location with 2-year-old lining. Analysis of metals showed that epoxy lining can reduce especially iron concentration in water. No significant burden to water could be shown by the analyzed 72 volatile organic compounds, including epichlorhydrin, precursor used in epoxy resin. Estrogenicity was detected in water samples with the highest BPA loads. Comparable responses of two yeast bioreporters (estrogen receptor α and BPA-targeted) indicated that bisphenol-like compounds were the main cause of estrogenicity. Compared to the estimated average daily BPA exposure, additional BPA load via cold drinking water in the studied locations was low, maximum 8.7%. However, hot water should also be considered as exposure source due to higher BPA concentrations. Epoxy lined locations should be monitored in future in order to evaluate ageing process and control increasing leaching of potentially harmful chemicals.