Magnetic porous carbon derived from a bimetallic metal–organic framework for magnetic solid-phase extraction of organochlorine pesticides from drinking and environmental water samples

Simultaneous effervescence-assisted microextraction and magnetic adsorbent generation for rapid and cost-effective organochlorine pesticides analysis

This study introduced an innovative magnetic effervescence-assisted microextraction method, streamlining the preparation of effervescent tablets through a one-pot method that blends a CO2 donor (Na2CO3) and an H+ donor (NaH2PO4) with bare magnetic particles (Fe3O4) and an adsorbent (hydroxylated multi-walled carbon nanotubes), followed by pressing. During the extraction process, the bare magnetic particles and adsorbent undergo in-situ self-assembly to create a magnetic adsorbent. The effervescence generates bubbles that enhance effective extraction and magnetism facilitates the easy separation of the magnetic adsorbent from the sample solution, completing the process within 4 min. Applied to organochlorine pesticide analysis in fruit juices and herbal extracts, the method exhibits excellent linearity (R2 > 0.993), sensitivity (detection limits: 0.010-0.125 ng/mL), accuracy (recoveries: 85.8-99.9%), and precision (RSDs < 9.7%) with GC-ECD. Overall, this approach stands out for its simplicity, cost-effectiveness, and suitability for on-site analysis, owing to its operational ease and independence from specialized equipment.

Low transition temperature mixture-based extraction of 14 pesticides from tomato samples and their high-performance liquid chromatography-tandem mass spectrometry analysis

The extensive use of pesticides to control pest infestations has led to the development of analytical methods to determine pesticide residues in food matrices to prevent food exposure. However, most developed analytical methods do not consider impact on the environment in terms of the toxicity of the chemicals used and the amount of waste produced. An environmentally-friendly method, based on a miniaturized matrix solid-phase dispersion followed by high-performance liquid chromatography-tandem mass spectrometry, for the analysis of fourteen pesticides in tomatoes, was exploited. For the recovery of pesticides from tomato samples, a low transition temperature mixture (LTTM), containing choline chloride and sesamol 1:3 molar ratio, was employed. Extraction parameters like sample-to-dispersant ratio, extraction solvent volume and LTTM volume were optimized through a Box-Behnken design. The 1:4 sample-to-dispersant ratio, 900 µL of ethanol as extraction solvent and 50 µL of LTTM ensured the best result considering the pesticides' peak areas. The optimized analytical method was validated obtaining the following results: linearity range was between LOQ and 5 mg kg-1 with a minimum R2 of 0.9944 for tebufenozide, values in the range of 0.001-0.023 and 0.004-0.076 mg kg-1 were obtained for LOD and LOQ respectively, while peak areas intra-day and inter-day repeatability were maximum of 10.19 and 9.15 %, respectively. The analytical method was then applied to real samples studying whole, pulp and peel tomato pool. The analysis of whole and tomato pulp revealed the presence of seven and eight of the fourteen investigated pesticides, respectively. However, their concentration was lower than the limit of quantification. In tomato peel, five pesticides, namely dimethomorph, methoxyfenozide, pyraclostrobin, pyriproxyfen, and spiromesifen were quantified and their concentrations were below maximum residue levels.

Ternary solvent based homogeneous liquid-liquid microextraction for the preconcentration of organochlorine pesticides from water and apple juice samples

In the present study, the optimal experimental conditions were determined by optimizing the effect of extraction solvent types and volume, salt types and concentration, centrifugation speed and time using one variable at a time. Under optimal experimental conditions, calibration curves were constructed separately using water and apple juice samples as representative matrices, and good linearities were achieved over a wide concentration range of 0.2-1600 ng L-1 with a coefficient of determination (r2) ≥ 0.998. The limits of detection (LOD) and limits of quantification (LOQ), determined to be 3 and 10 times the signal-to-noise ratios (S/N), were between 0.07-3.9 and 0.2-12.0 ng L-1 for water samples and 2.6-10.0 and 8.0-30.0 ng L-1 for the apple juice sample respectively. The precisions study showed %RSD values of ≤6% for both matrices, indicating satisfactory precisions. The enrichment factors and recoveries of the proposed method ranged from 41.4-74.5 and 86-109% respectively. The proposed method could be used as a simple and environmentally friendly alternative for the analysis of OCPs from environmental and food matrices. This method potentially offers a more sustainable and effective approach to monitoring OCPs in environmental and food products. Its use in the analysis of apple juice samples is particularly novel and can provide valuable insights into pesticide contamination in fruit juices.

ZIF67-derived porous carbon-reinforced electrospun nanofiber as an extractive phase for on-chip micro-solid-phase extraction of antifungals from biological fluids prior to liquid chromatography tandem mass spectrometry

With a view to improving applicability as a sorbent while overcoming the challenges associated with its powdery nature, cobalt-doped zeolitic imidazolate framework (ZIF 67)-derived nanoporous carbon (Co-NPC) was employed as an additive in nanofiber through the process of electrospinning. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Brunauer-Emmett-Teller (BET) surface area analysis were used to characterize the resulting nanocomposite. A microfluidic chip device with four layers, including two layers entailing spiral channels, was designed and employed to assess the analytical performance of the fabricated Co-NPC-reinforced electrospun composite. To do so, a folded piece of electrospun composite was sandwiched between two layers with spiral channels. Therefore, both sides of the folded composite acted as a sorptive phase to extract antifungal drugs as target analytes. The significant factors affecting the efficiency of the extraction process were investigated and optimized. Subsequently, the technique was verified through the utilization of liquid chromatography-tandem mass spectrometry (LC-MS/MS) by employing optimal parameters. The optimal conditions were applied to evaluate the figures of merit. A linear range was obtained for antifungal drugs within the range 0.25-200.0 ng ml-1 with an R2 value of ≥ 0.9914. The method demonstrated detection limits ranging between 0.08 and 0.40 ng ml-1. The intra-day and inter-day precisions were less than 6.9%. Relative recoveries exhibited variations between 91.4-106.8%, 95.9-103.6%, and 96.4-109.3% for ketoconazole, clotrimazole, and miconazole, respectively. The proposed approach yielded satisfactory results, demonstrating its efficiency.

A magnetic molecularly imprinted polymer based on an eco-friendly deep eutectic solvent for the selective recognition of dichlorodiphenyl trichloroethane and its degradation products in fruits and vegetables

A new magnetic molecularly imprinted polymer was successfully synthesized using a ternary deep eutectic solvent derived from caffeic acid-choline chloride-formic acid as a functional monomer, thymol-menthol deep eutectic solvent as a template, ethylene glycol dimethacrylate as a cross-linker, potassium peroxodisulfate as an initiator, and aqueous ethanol solution (90% (v/v)) as a porogen. The synthesized material was characterized and applied for magnetic solid-phase extraction of dichlorodiphenyl trichloroethane and its degradation products. Optimization of the extraction condition was carried out using the central composite design and response surface methodology. The good analytical performance of magnetic solid phase extraction/gas chromatography‒mass spectrometry using the proposed adsorbent shows a wide linear range of 0.07-500 ng g-1 with R2 greater than 0.992. Low detection limits and quantitation limits were observed in the ranges of 0.01-2.00 ng g-1 and 0.07-2.50 ng g-1, respectively. The precisions shown in terms of relative standard deviations were lower than 7.0% for intraday (n=5) and 8.6% for interday (n=5 × 3) experiments. The proposed method was applied for preconcentration and determination of dichlorodiphenyl trichloroethane and its degradation products in fruit and vegetable samples. The satisfactory recoveries of the real samples at three spiked concentrations were obtained in the range of 79.1%-110.9% with RSDs lower than 7.5%. The findings highlight the importance of developing efficient sorbents for the enrichment of persistent organic pollutants in food matrices.

Metal-organic frameworks for food contaminant adsorption and detection

Metal-organic framework materials (MOFs) have been widely used in food contamination adsorption and detection due to their large specific surface area, specific pore structure and flexible post-modification. MOFs with specific pore size can be targeted for selective adsorption of some contaminants and can be used as pretreatment and pre-concentration steps to purify samples and enrich target analytes for food contamination detection to improve the detection efficiency. In addition, MOFs, as a new functional material, play an important role in developing new rapid detection methods that are simple, portable, inexpensive and with high sensitivity and accuracy. The aim of this paper is to summarize the latest and insightful research results on MOFs for the adsorption and detection of food contaminants. By summarizing Zn-based, Cu-based and Zr-based MOFs with low cost, easily available raw materials and convenient synthesis conditions, we describe their principles and discuss their applications in chemical and biological contaminant adsorption and sensing detection in terms of stability, adsorption capacity and sensitivity. Finally, we present the limitations and challenges of MOFs in food detection, hoping to provide some ideas for future development.

A novel poly(2-mercaptobenzothiazole) coated magnetic nanoadsorbent derived from ZIF-8 for preconcentration/determination of palladium and silver

Herein, a novel poly(2-mercaptobenzothiazole) coated magnetic nanoadsorbent derived from zeolitic-imidazole framework-8 (ZIF-8) was synthesized and then employed for the extraction/preconcentration of trace amounts of palladium and silver in various real matrixes. In this way, magnetite was fabricated first, and then functionalized with tetraethyl orthosilicate. After that, the synthesized magnetite@silica was coated with the ZIF-8 to obtain magnetic ZIF-8. Afterward, the magnetic ZIF-8 was pyrolyzed under the protection of a nitrogen atmosphere to get a magnetic carbon nanoadsorbent. Finally, the magnetic carbon was functionalized with a conductive polymer (poly-2-mercaptobenzothiazole). Fabrication of the nanoadsorbent was affirmed with scanning and transmission electron microscopies, elemental analysis, X-ray diffraction, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. The method is linear from 0.25 to 200 μg L^-1 for silver, and from 0.5 to 250 μg L^-1 for palladium. The detection limits are 0.07 and 0.15 μg L^-1 for Ag and Pd, respectively. The precision was evaluated at three concentration levels (1, 75, 200 μg L^-1, n = 5) and all the relative standard deviation (RSD) values were lower than 10.3%. In the end, the new method was utilized for the preconcentration/determination of trace amounts of palladium and silver in various real matrixes, satisfactorily (relative recovery: 86% to 104%; RSD%: 4.0-9.5%).

Superhydrophobic Nanosilica Decorated Electrospun Polyethylene Terephthalate Nanofibers for Headspace Solid Phase Microextraction of 16 Organochlorine Pesticides in Environmental Water Samples

A new solid phase micro extraction (SPME) fiber coating composed of electrospun polyethylene terephthalate (PET) nanofibrous mat doped with superhydrophobic nanosilica (SiO2) was coated on a stainless-steel wire without the need of a binder. The coating was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectrometer (FTIR) techniques and it was used in headspace-SPME of 16 organochlorine pesticides in water samples prior to gass chromatography micro electron capture detector (GC-µECD) analysis. The effects of main factors such as adsorption composition, electrospinning flow rate, salt concentration, extraction temperature, extraction time, and desorption conditions were investigated. Under the optimum conditions, the linear dynamic range (8−1000 ng L−1, R2 > 0.9907), limits of detection (3−80 ng L−1), limits of quantification (8−200 ng L−1), intra-day and inter-day precisions (at 400 and 1000 ng L−1, 1.7−13.8%), and fiber-to-fiber reproducibility (2.4−13.4%) were evaluated. The analysis of spiked tap, sewage, industrial, and mineral water samples for the determination of the analytes resulted in satisfactory relative recoveries (78−120%).

Recent progress in organic-inorganic hybrid materials as absorbents in sample pretreatment for pesticide detection

Sample pretreatment is essential for trace analysis of pesticides in complex food and environment matrices. Recently, organic-inorganic hybrid materials have gained increasing attention in pesticide extraction and preconcentration. This review highlighted the common organic-inorganic hybrid materials used as absorbents in sample pretreatment for pesticide detection. Furthermore, the preparation and characterization of organic-inorganic hybrid materials were summarized. To obtain a deep understanding of adsorption toward target analytes, the adsorption mechanism and absorption evaluation were discussed. Finally, the applications of organic-inorganic hybrid materials in sample pretreatment techniques and perspectives in the future are also discussed.

Sample preparation techniques for suspect and non-target screening of emerging contaminants

The progress in sensitivity and resolution in mass spectrometers in recent years provides the possibility to detect a broad range of organic compounds in a single procedure. For this reason, suspect and non-target screening techniques are gaining attention since they enable the detection of hundreds of known and unknown emerging contaminants in various matrices of environmental, food and human sources. Sample preparation is a critical step before analysis as it can significantly affect selectivity, sensitivity and reproducibility. The lack of generic sample preparation protocols is obvious in this fast-growing analytical field, and most studies use those of traditional targeted analysis methods. Among them, solvent extraction and solid phase extraction (SPE) are widely used to extract emerging contaminants from solid and liquid sample types, respectively. Sequential solvent extraction and a combination of different SPE sorbents can cover a broad range of chemicals in the samples. Gel permeation chromatography (GPC) and adsorption chromatography, including acidification, are typically used to remove matrix components such as lipids from complex matrices, but usually at the expense of compound losses. Ideally, the purification of samples intended for non-target analysis should be selective of matrix interferences. Recent studies have suggested quality assurance/quality control measures for suspect and non-target screening, based on expansion and extrapolation of target compound lists, but method validations remain challenging in the absence of analytical standards and harmonized sample preparation approaches.

Magnetic porous carbons derived from iron-based metal-organic framework loaded with glucose for effective extraction of synthetic organic dyes in drinks

The conversion of metal-organic frameworks (MOFs) to porous carbon has attracted extensive attention for developing multifunctional adsorbent materials. Herein, we demonstrated a facile method to prepare magnetic porous carbon via calcinating MIL-101(Fe) precursor loaded with glucose at 700 °C in an N₂ atmosphere. The obtained magnetic porous carbon (MPCG) contained plenty of oxygen-containing functional groups and exhibited an enlarged specific surface area (177.7 m²/g) compared with its precursor (41.2 m²/g). In addition, MPCG can be easily separated from the matrix by a magnet. Benefitting from these advantages, the magnetic porous carbon exhibited high affinity toward four synthetic organic dyes (amaranth, ponceau 4R, sunset yellow, and lemon yellow) in an aqueous solution. Moreover, the adsorbent can be applied to quantitatively detect synthetic organic dyes in drinks coupled with chromatography. A new magnetic solid-phase extraction method for dye analysis yielded reasonable linearity (r □ 0.99), low limits of detection (0.047-0.076 μg/L), and good precision within the analyte concentration range of 0.25-50 μg/L.

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a challenging process for the analytical chemistry. Metal-organic frameworks (MOFs) are novel porous nanomaterials that are composed of metal ions and an organic connector. These materials are gaining more and more attention due to their superior characteristics, such as high surface area, tunable pore size, mechanical and thermal stability, luminosity, and charge transfer ability between metals and ligands. Among the various applications of MOFs are gas storage, separation, catalysis, and drug delivery. Recently, MOFs have been successfully introduced in the field of sample preparation for analytical chemistry and they have been used for sample pretreatment of various matrices. This review focuses on the applications of MOFs as novel adsorbents for the extraction of organic compounds from environmental samples.

Dispersive liquid-liquid microextraction method combined with sugaring-out homogeneous liquid-liquid extraction for the determination of some pesticides in molasses samples

In this study, a sensitive analytical method was developed to determine some pesticides (cyprodinil, trifloxystrobin, prometryn, propachlor, fenitrothion, chlorpyrifos, profenofos, and phosalone) in molasses samples. Pesticides were extracted from samples by dispersive liquid-liquid microextraction method combined with sugaring-out homogeneous liquid-liquid extraction and determined by gas chromatography-mass spectrometry analysis. In this method, pesticides in molasses samples were first extracted using a water-miscible solvent (acetonitrile) in the sugaring-out homogeneous liquid-liquid extraction stage. The sugar in the ratio of 84-88% naturally contained in the molasses sample enabled phase separation in the acetonitrile-water homogeneous mixture. Then acetonitrile phase containing pesticides was used as dispersing solvent in the second step of the process. Under the specified optimum conditions, the limit of detection was calculated between 0.8-6.1 ng/g and the limit of quantification was in the range of 2.5-20 ng/g. The relative standard deviation values of molasses samples containing 150 ng/g of each analyte were found to be lower than 4.9% intra-day and 5.6% for inter-day. This validated method has been successfully applied to different types of molasses.

[Research progress in application of metal-organic framework-derived materials to sample pretreatment]

Sample pretreatment technology plays a vital role throughout the analysis of complex samples. Sample pretreatment can not only increase the concentration of trace targets in the sample, but also effectively eliminate interference from the sample matrix in instrumental analysis. Adsorbent materials are a key component of sample pretreatment technology. Therefore, the development of efficient and stable new adsorbent materials has acquired significance in research on pretreatment technology. Porous materials are advantageous for use in diverse applications, such as in adsorbents, when they possess controllable nanostructures, a tailored pore surface chemistry, and abundant porosity, and are inexpensive. Particularly in recent years, porous materials derived from metal-organic frameworks (MOFs) feature excellent properties, such as diverse morphology and structure, adjustable pore size, high specific surface area, good thermal stability, and chemical resistance. MOF-derived materials, when used as adsorbents for sample pretreatment, offer the following advantages: (1) The porous materials derived from MOFs typically possess a larger specific surface area than other porous materials. This characteristic is beneficial to improve the extraction capacity and extraction efficiency via an increase in the contact area between the materials and targets; (2) The microscopic porous structure of MOF-derived materials can be easily tuned (by controlling the temperature and time during pyrolysis, gas atmosphere, and heating rate), which is conducive to improve the selectivity of sample pretreatment methods; (3) The metal active sites can be evenly distributed. Owing to the ordered distribution of metal ions in the precursor MOFs and a good periodic framework structure, the metal active sites of the derivatives formed can still maintain a corresponding distance. These metal active sites will not form agglomerates and affect the extraction performance; conversely, other porous materials often require extremely complicated processes to achieve a uniform distribution; (4) Heteroatoms such as nitrogen and sulfur can be easily doped on the framework of MOF-derived porous materials. This doping enables the materials to induce additional interactions such as hydrogen bonding and π-π stacking for adsorbing target analytes. The excellent properties of MOF-derived materials make them promising for use in sample pretreatment. Novel sample pretreatment methods that use MOF-derived materials are constantly being developed. However, the use of MOF-derived materials is limited by the complex preparation process and high production cost of MOF precursors, along with difficulties in mass production. Further, the precise design or functionalization of MOF-derived materials according to the characteristics of targets is a new direction with immense challenges as well as application potential. This review summarizes the application of MOF-derived materials in sample pretreatment methods, including dispersive solid phase extraction (dSPE), magnetic solid phase extraction (MSPE), solid phase microextraction (SPME), stir bar sorptive extraction (SBSE), and dispersive micro solid phase extraction (DMSPE). The preparation methods, functional control, and enrichment efficiencies of various MOF-derived materials are also reviewed. Finally, the application prospects of MOF-derived materials in sample pretreatment are discussed to provide a clear outlook and reference for further related research.

Preparation of magnetic zeolitic imidazolate framework-8 for magnetic solid-phase extraction of strobilurin fungicides from environmental water samples

In this paper, magnetic zeolitic imidazolate framework-8 composites were synthesized by a simple in situ method and then used for the first time as an adsorbent in magnetic solid-phase extraction for extracting multiple strobilurin fungicides. The magnetic composites were characterized in detail. The results showed that Fe₃O₄ nanoparticles were attached on the surface of zeolitic imidazolate framework-8 with a uniform particle size of 150-200 nm and that the magnetic composites possessed a perfect molecular transfer rate towards strobilurin fungicides. The parameters of the magnetic solid-phase extraction process, including solution pH, adsorption time, solution volume, elution solvent, and elution volume, were investigated. Under the optimum conditions, the recoveries of all five fungicides fell within the range 80.8-109.0% with spiking levels of 10, 20 and 50 ng mL^-1. A magnetic solid-phase extraction-high performance liquid chromatography-tandem mass spectrometry method based on the magnetic composites was established and confirmed to be simple, time-efficient and highly sensitive.

Magnetic polyamidoamine dendrimers for magnetic separation and sensitive determination of organochlorine pesticides from water samples by high-performance liquid chromatography

Organochlorine pesticides (OCPs) have received much attention due to their toxicity. Reliable methods to monitor their residues in the environment are needed. Here, magnetic polyamidoamine dendrimers were prepared by co-precipitation, Michael addition, and amidation. The magnetic polyamidoamine dendrimers demonstrated good adsorption ability for OCPs-this feature was utilized to construct a sensitive tool for monitoring OCPs in water samples. The proposed method provided remarkable linearity from 0.1 to 500 μg/L and satisfactory limits of detection from 0.012 to 0.029 μg/L. The spiked recoveries of the four target analytes were 91.8%-103.5% with relative standard deviations less than 4.5%. The magnetic materials had good reusability. The results indicated that the resulting method was an efficient, easy, rapid, economical, and eco-friendly tool for monitoring OCPs in aqueous samples.

New frontiers and prospects of metal-organic frameworks for removal, determination, and sensing of pesticides

Pesticides have been widely used in agriculture to control, reduce, and kill insects. Humans are also being using pesticides to control insidious animals in daily life. By these practices, a huge volume of pesticides is introduced to the environment. Despite broad-spectrum applicability, pesticides also have hazardous effects on both humans and animals at high and low concentrations. Long-term exposure to pesticides can cause different diseases, like leukemia, lymphoma, and cancers of the brain, breasts, prostate, testis, and ovaries. Reproductive disorders from pesticides include birth defects, stillbirth, spontaneous abortion, sterility, and infertility. Therefore, the application of determination and treatment methods for pre-concentration and removal of these toxic materials from the environment appears a vital concern. To date, different materials and approaches have been employed for these purposes. Among these approaches, multifunctional metal-organic frameworks (MOFs)-assisted adsorption and determination processes have always been in the spotlight. These facts are due to exclusive properties of MOFs in terms of the crystallinity, large surface area, high chemical, and physical stability, and controllable structure as well as unique features of adsorption and determination process in terms of simple, easy, cheap, available method and ability to use in large and industrial scales. In the present work, we illustrate the exceptional features of MOFs as well as the possible mechanism for the adsorption of pesticides by MOFs. The use of these fantastic materials for pre-concentration and removal of pesticides are extensively explored. In addition, the performance of MOFs was compared with other adsorbents. Finally, the new frontiers and prospects of MOFs for the determination, sensing, and removal of pesticides are presented.

Metal-organic framework for the extraction and detection of pesticides from food commodities

Pesticide residues in food matrices, threatening the survival and development of humanity, is one of the critical challenges worldwide. Metal-organic frameworks (MOFs) possess excellent properties, which include excellent adsorption capacity, tailorable shape and size, hierarchical structure, numerous surface-active sites, high specific surface areas, high chemical stabilities, and ease of modification and functionalization. These promising properties render MOFs as advantageous porous materials for the extraction and detection of pesticides in food samples. This review is based on a brief introduction of MOFs and highlights recent advances in pesticide extraction and detection through MOFs. Furthermore, the challenges and prospects in this field are also described.

Double layer MOFs M-ZIF-8@ZIF-67: The adsorption capacity and removal mechanism of fipronil and its metabolites from environmental water and cucumber samples

In this study, a novel metal-organic framework (M-ZIF-8@ZIF-67) was successfully prepared using the single layer Fe3O4-ZIF-8 as magnetic core and wrapped a layer of ZIF-67 outer. This M-ZIF-8@ZIF-67 was employed as an adsorbent for the adsorption and removal of fipronil and its metabolites from environmental water and cucumber samples. The characterization results suggested that M-ZIF-8@ZIF-67 has the double layer structure a polyhedral structure with uniform pores, while ZIF-67 was successfully coated on the surface of Fe3O4-ZIF-8. The unique structure endowed M-ZIF-8@ZIF-67 a high surface area (219 m2/g) and high adsorption capacity for fipronil, fipronil desulfinyl, fipronil sulfide and fipronil sulfone. To our knowledge, this is the first report detailing the adsorption properties of M-ZIF-8@ZIF-67 with double layer structure relating to the adsorption and removal of pesticides. Furthermore, the adsorption model analysis demonstrated that the static adsorption data fitted the Freundlich bimolecular layer adsorption model better than the Langmuir monolayer adsorption model. This study indicates that M-ZIF-8@ZIF-67 has significant potential in the adsorption and removal of fipronil and its metabolites in water and vegetable samples.

PCN-222 metal-organic framework: a selective and highly efficient sorbent for the extraction of aspartame from gum, juice, and diet soft drink before its spectrophotometric determination

In this paper, we describe synthesis and application of an iron porphyrinc metal-organic framework PCN-222(Fe) for solid phase extraction of aspartame, an artificial non-saccharine sweetener, from gum, juice and diet soft drink samples prior to its determination by spectrophotometry. The mesoporous MOF was synthesized solvo-thermally and characterized by Fourier transform-infrared spectroscopy, powder X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller techniques. To obtain the best extraction efficiency of aspartame, significant affecting parameters such as pH of sample solution, amount of the sorbent, type and volume of eluting solvent, and adsorption and desorption times were investigated and optimized. Under optimum conditions, the calibration graph for aspartame was linear in the range of 0.1 to 100.0 mg.L^-1 and relative standard deviation of aspartame was 1.7% (n = 7). Limit of detection of method calculated as 0.019 mg.L^-1 and the enrichment factor of 350 folds was obtained. Adsorption capacity of synthesized sorbent was found to be 356 mg.g^-1. Hierarchical porosity, the eight terminal-OH groups of the Zr₆ node, and hydrogen bonding possibly play vital role for selective adsorption of aspartame. The optimized method was successfully applied to the determination of aspartame in real samples with reasonable recoveries (> 98%).

Magnetic porous carbons derived from cobalt(ii)-based metal–organic frameworks for the solid-phase extraction of sulfonamides

A highly porous magnetic C/Co-SIM-1 carbon obtained via a simple carbonization process as a promising material for the simultaneous extraction of sulfonamides.

A beta-cyclodextrin-functionalized magnetic metal organic framework for efficient extraction and determination of prochloraz and triazole fungicides in vegetables samples

A β-cyclodextrin-functionalized magnetic zinc-metal organic framework (M-MOF/β-CD) was synthesized via a facile one-pot reaction. M-MOF/β-CD was used as a magnetic porous absorbent for the extraction and determination of prochloraz and three triazole fungicides in vegetable samples. M-MOF/β-CD was prepared by creating MOF layers on the surface of a Fe₃O₄-graphene oxide (GO) nanocomposite and bonding them with β-CD molecules. Characterization suggested that a 3D porous structure was formed, with M-MOF/β-CD exhibiting high superparamagnetism and a large surface area. As a new strategy, integrating MOFs with Fe₃O₄-GO could improve their water-resistance and mechanical strength by providing a rigid nanosupport interface. Combining M-MOF and β-CD resulted in excellent selective adsorption capacities for prochloraz and three triazole fungicides. The static adsorption process was evaluated and the results were in good agreement with the Freundlich model. Subsequently, M-MOF/β-CD was applied to extracting prochloraz and triazole fungicides from tomato and lettuce vegetables, followed by HPLC-MS/MS determination. The limits of detection for the above fungicides were found to be 0.25-1.0 μg/L at a signal-to-noise ratio of 3, with spiked recoveries of 74.13%-119.83%, indicating that M-MOF/β-CD was promising for application to the extraction and determination of fungicides in complex matrices.

Core-shell structured magnetic mesoporous carbon nanospheres derived from metal-polyphenol coordination polymer-coated Fe3 O4 and its application in the enrichment of phthalates from water samples

In this work, core-shell structured magnetic mesoporous carbon nanospheres were fabricated from the carbonization of metal-polyphenol coordination polymer-coated Fe₃ O₄ nanoparticles. The preparation method is simple, fast, versatile, and easy to scale up. Magnetic mesoporous carbon nanospheres exhibit a high specific surface area, high superparamagnetism, and high adsorption efficiencies for phthalates. Four phthalates were extracted from aqueous solutions by using magnetic mesoporous carbon nanospheres via magnetic solid phase extraction. Subsequent analysis was performed by using high-performance liquid chromatography with ultraviolet detection. The analytical method has good linearity in the concentration range of 1-200 ng/mL for diethyl phthalate, diisobutyl phthalate, and dicyclohexyl phthalate, and 3-200 ng/mL for dipropyl phthalate. The limits of detection were in the range of 0.10-0.62 ng/mL. Compared with previous methods, this method has a lower detection limit, wider linearity range, and faster adsorption and desorption rates. The results indicate that magnetic mesoporous carbon nanospheres are suitable for the enrichment of hydrophobic substances from aqueous solutions.

Facile synthesis of magnetic carbon nanotubes derived from ZIF-67 and application to magnetic solid-phase extraction of profens from human serum

Magnetic carbon nanotubes (CNTs) with encapsulated Co nanoparticles (Co@CNTs), was synthesized by exploiting the one-step pyrolysis strategy using ZIF-67 as template. The as-synthesized Co@CNTs is provided with the nanopores, a large specific surface area, and strong magnetic response. The obtained Co@CNTs was used as magnetic solid-phase extraction adsorbents to extract two profens including flurbiprofen and ketoprofen. The parameters of extraction efficiency, involving extraction time, sample solution volume, ionic strength, pH and the conditions of desorption efficiency, were optimized in detail. After determined by high-performance liquid chromatography-ultraviolet (HPLC-UV), the results evinced that Co@CNTs showed a high extraction efficiency with high enrichment factors of 832 and 672. The good linear range of both flurbiprofen and ketoprofen were all 5.0-1000 ng L^-1, with the limit of detection were 0.60 ng L^-1 and 0.70 ng L^-1, respectively. Furthermore, a valid method for the extraction of flurbiprofen and ketoprofen from human serum was established. The spiking recoveries of two profens were between 86.74% and 97.22%, and the relative standard deviation was less than 6.55%. Co@CNTs can be repeatedly used at least 10 times, indicating its excellent regeneration and reusability. The results demonstrated that the Co@CNTs materials exhibits high enrichment ability and extraction efficiency, playing great promise in MSPE.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

Magnetic Solid-Phase Extraction of Dichlorodiphenyltrichloroethane and Its Metabolites from Environmental Water Samples Using Ionic Liquid Modified Magnetic Multiwalled Carbon Nanotube/Zeolitic Imidazolate Framework-8 as Sorbent

As persistent organic pollutants, dichlorodiphenyltrichloroethanes (DDTs) and their metabolites pose considerable risks to human health and the environment. Therefore, monitoring DDTs in the environment is essential. Here, we developed a green, simple, and effective magnetic solid-phase extraction (MSPE) method coupled with gas chromatography tandem triple-quadrupole mass spectrometry to determine the DDT content of environmental water samples. A magnetic ionic liquid (IL) adsorbent was developed based on a modified magnetic multiwalled carbon nanotube/zeolitic imidazolate framework-8 (MM/ZIF-8/IL), synthesized by immobilizing the IL on the surface of MM/ZIF-8. We confirmed successful synthesis of MM/ZIF-8/IL by material characterization, and our results suggested that the MM/ZIF-8/IL had a high Brunauer-Emmett-Teller surface area (159.9 m2 g-1), good thermostability (<800 °C), and a high degree of superparamagnetism (52.9 emu g-1). Several experimental conditions affecting the MSPE efficiency were optimized. Under the best conditions, good detection linearity was achieved (0.5-500 µg L-1) with determination coefficients ranging from 0.9927 to 0.9971. The lower limits of detection (0.0016-0.0072 µg L-1) also had good precision, having an intraday relative standard deviation (RSD) ≤ 6.5% and an interday RSD ≤ 8.9%. Finally, we used the as-developed method to determine DDT levels in environmental water samples.