Dispersive micro-solid phase extraction of aromatic amines based on an efficient sorbent made from poly(1,8-diaminonaphtalen) and magnetic multiwalled carbon nanotubes composite

In-syringe homogeneous liquid-phase microextraction followed by filtration-based phase separation for on-site extraction of chloroanilines from water samples

This study introduces a new in-syringe homogeneous liquid-phase microextraction method for the rapid on-site extraction of chloroanilines from water samples. Extraction was performed using a plastic syringe, eliminating the use of any electrical power source. Di-(2-ethylhexyl) phosphoric acid (DEHPA) served as the extractant. The process initially involved dissolving DEHPA in an alkaline solution to obtain a homogeneous solution. Subsequently, the sodium salt of DEHPA was precipitated by salting-out, and the resulting heterogeneous mixture was filtered using a syringe filter. The precipitate containing the analytes was then dissolved in methanol for analysis by high-performance liquid chromatography. Under optimal conditions, extraction recovery for chloroanilines ranged from 26% to 71%. Method linearity was evaluated within a concentration range of 1.0-100 µg/L, resulting in coefficients of determination exceeding 0.9987 for all analytes. Method detection limits ranged from 0.28 to 0.41 µg/L. Intra and inter-day precision values were below 9.5% and 10.8%, respectively. The developed method was applied to determine chloroanilines in real waters, yielding acceptable recoveries ranging from 80% to 109% for spiked tap, rain, and stream waters. Additionally, the method was successfully employed for on-site extraction of target contaminants, demonstrating no statistically significant differences compared to laboratory results.

Determination of furfurals in baby food samples after extraction by a novel functionalized magnetic porous carbon

Herein, a novel polypyrrole-polyaniline functionalized magnetic porous carbon (MPC@PPy-PANI) composite material was fabricated and utilized for the separation/extraction of furfurals from baby food and dry milk samples. In this way, magnetite@silica nanoparticles were first synthesized, and then a magnetic metal–organic framework (MMIL-101(Fe)) was prepared. After that, the MMIL-101(Fe) was pyrolyzed in a neutral atmosphere to obtain MPC. Ultimately, the MPC was functionalized with a co-polymer of aniline–pyrrole via oxidation polymerization. The synthesis of MPC@PPy-PANI was confirmed with FT-IR spectroscopy, SEM, TEM, VSM, and XRD techniques. Furfural and hydroxymethyl furfural were selected as the model analytes, which were separated/quantified on an HPLC-UV instrument. The LODs, LOQs, and linear dynamic ranges (LDRs) were in the range of 0.3–0.7 μg kg⁻¹, 1.0–2.5 μg kg⁻¹, and 1.0–600 μg kg⁻¹, respectively. Repeatability of the method was studied as an RSD parameter, and was located in the range of 5.5–6.8% (within-day, n = 5) and 8.2–9.4% (between-day, n = 3 days). The applicability of the proposed method was established by analyzing several baby food and dry milk samples. The relative recovery (RR%) and repeatability were located in the range of 86–111% and 3.3–10.1%, respectively, showing excellent accuracy and precision of the method.

Herein, a novel polypyrrole-polyaniline functionalized magnetic porous carbon (MPC@PPy- PANI) composite material was fabricated and utilized for the separation/extraction of furfurals from baby food and dry milk samples.

Creatine@SiO2 @Fe3 O4 nanocomposite as an efficient sorbent for magnetic solid-phase extraction of escitalopram and chlordiazepoxide from urine samples through quantitation via HPLC-UV

An efficient, cost-effective, and fast-synthesis method is presented in the current study to prepare magnetic nanoparticles covered by cheap and nitrogen-rich creatine. The hydrothermal method was used for the synthesis of the magnetic core. The prepared magnetic core was then covered by SiO₂ and subsequently functionalized using creatine. The prepared creatine@SiO₂ @Fe₃ O₄ was utilized as a sorbent in the magnetic solid-phase extraction of the selected antidepressants including escitalopram and chlordiazepoxide as the model drugs. The extracted drugs were desorbed by a suitable organic solvent and analyzed by high-performance liquid chromatography equipped with an ultraviolet detection system. The influence of different variables on the magnetic solid-phase extraction method was examined by the Plackett-Burman and Box-Behnken designs for screening and optimization, respectively. Under the obtained optimum conditions, the linear ranges of the method were found to be in the range of 1-500 µg L^-1 . The limits of detection and limits of quantification were in the range of 0.27-0.63 µg L^-1 and 0.89-1.93 µg L^-1 for the selected analytes, respectively. Furthermore, the enrichment factors were found to be 79.8 and 92.7 for chlordiazepoxide and escitalopram, respectively. The method was successfully employed for the analysis of selected drugs in urine samples.

Performance comparison between solid phase extraction and magnetic carbon nanotubes facilitated dispersive-micro solid phase extractions (Mag-CNTs/d-µSPE) of a cyanide metabolite in biological samples using GC–MS

Dispersive-micro solid phase extraction (d-µSPE) has gained increasing attention due to its convenience, effectiveness, and flexibility for sorbent selection. Among a various selection of materials, magnetic carbon nanotubes (Mag-CNTs) is a promising d-µSPE sorbent with excellent separation efficiency in addition to its high surface area and adsorption capability. In this work, two different surface-modified Mag-CNTs, Mag-CNTs-COOH and Mag-CNTs-SO3H, were developed to facilitate d-µSPE (Mag-CNTs/d-µSPE). The cyanide metabolite, 2-aminothiazoline-4-carboxylic acid (ATCA), was selected to evaluate their extraction performance using gas chromatography–mass spectrometry (GC–MS) analysis. The Mag-CNTs-COOH enabled a one-step derivatization/desorption approach in the workflow; therefore, a better overall performance was achieved. Compared to the Mag-CNTs-SO3H/d-µSPE and SPE workflow, the one-step desorption/derivatization approach improved the overall extraction efficiency and reduced solvent consumption and waste production. Both Mag-CNTs/d-µSPE workflows were validated according to ANSI/ASB 036 guidelines and showed excellent analytical performances. The limit of detection (LOD) and limit of quantitation (LOQ) of ATCA in synthetic urine were 5 and 10 ng/mL, respectively, and that in bovine blood were achieved at 10 and 60 ng/mL. The SPE method’s LOD and LOQ were also determined at 1 and 25 ng/mL in bovine blood samples. The Mag-CNTs/d-µSPE methods demonstrated great potential to extract polar and ionic metabolites from biological matrices. The extraction processes of ATCA described in this work can provide an easier-to-adopt procedure for potential routine forensic testing of the stable biomarker in cyanide poisoning cases, particularly for those cases where the cyanide detection window has passed.

Synthesis and characterization of a novel magnetic porous carbon coated with poly(p-phenylenediamine) and its application for furfural preconcentration and determination in baby food and dry milk powder samples

The aim of the current research is to develop a MSPE method for the determination of furfural in baby food and dry milk samples. In this regard, a novel magnetic porous carbon composite coated with poly(p-phenylenediamine) was fabricated, characterized, and then applied to the preconcentration/extraction of furfurals from baby food and dry milk powder samples. Initially, magnetic nanoparticles (Fe3O4) were synthesized, and then coated with a metal-organic framework layer named MIL-101(Fe). Afterward, the magnetic MIL-101(Fe) was subjected to calcination under a nitrogen atmosphere and magnetic porous carbon was achieved. Finally, a layer of poly(p-phenylenediamine) was coated on the magnetic porous carbon. The structure of the nanocomposite was investigated with various methods, including FT-IR spectroscopy, electron microcopies (SEM and TEM), VSM, and XRD. The fabricated nanocomposite was applied in magnetic solid-phase extraction of furfural and hydroxymethyl furfural and their determination with liquid chromatography. The effect of experimental variables was explored by using an experimental design approach. The LODs and linear range for the target furfurals were 1.0-2.0 μg kg-1 and 3.0-500 μg kg-1, respectively. The method's repeatability was explored using RSD values and was found to be in the range of 5.2-6.4% (one-day, n = 5) and 9.1-10.8% (day to day, n = 3). Eventually, this new method was employed for the extraction/quantification of target compounds in baby food and dry milk powder samples.

Magnetic porous carbon nanocomposite derived from cobalt based-metal-organic framework for extraction and determination of homo and hetero-polycyclic aromatic hydrocarbons

Herein, a novel magnetic porous carbon nanocomposite derived from a cobalt based-metal-organic framework was synthesized and evaluated for simultaneous preconcentration of homo and hetero-polycyclic aromatic hydrocarbons. Briefly, magnetite nanoparticles (MNPs) were synthesized and then were coated with a metal-organic framework layer. Finally, the magnetic nanocomposite was carbonized under an inert atmosphere to obtain the magnetic porous carbon (MPC). Various characterization techniques such as FT-IR spectroscopy, transmission and scanning electron microcopies, vibrating sample magnetometry, and X-ray diffraction were employed. Applicability of the MPC was explored using benzothiophene, dibenzothiophene, 9,10-dimethylanthracene, and benz[α]anthracene as the model analytes. Limits of detection and linearities were achieved in the range of 0.06-0.18 μg L^-1 and 0.25-500 μg L^-1, respectively. Precision of the method as RSDs was evaluated which was in the range of 4.2-7.0% (within-day, n = 5) and 8.2-11.3% (between-day, n = 3). Ultimately, the method was applied to analyze two seawater samples and satisfactory results (RSDs%, 5.0-9.0%; relative recoveries, 89-104%) were obtained.

Multi-Walled Carbon Nanotubes for Magnetic Solid-Phase Extraction of Six Heterocyclic Pesticides in Environmental Water Samples Followed by HPLC-DAD Determination

Magnetic multi-walled carbon nanotubes were prepared as magnetic solid-phase extraction (MSPE) adsorbent for the enrichment of six heterocyclic pesticides in environmental water samples, including imidacloprid, triadimefon, fipronil, flusilazole, chlorfenapyr and fenpyroximate. Then six heterocyclic pesticides were separated and determined by high-performance liquid chromatography-diode-array detector (HPLC-DAD). Major factors influencing MSPE efficiency, including the dose of mag-multi-walled carbon nanotubes (mag-MWCNTs), extraction time, solution pH, salt concentration, type and volume of eluent and desorption time were investigated. Under the optimized conditions, the enrichment factor of the method reached to 250. The linearity was achieved within 0.05–10.0 μg/L for imidacloprid and chlorfenapyr, 0.10–10.0 μg/L for fipronil, flusilazole, triadimefon and fenpyroximate. Limits of detection were in the range of 0.01–0.03 μg/L. Good precision at three spiked levels were 1.1–11.2% (intra-day) and 1.7–11.0% (inter-day) with relative standard deviation of peak area, respectively. The developed method was utilized to analyze tap water, river water and reservoir water samples and recoveries at three spiked concentration levels ranged from 72.2% to 107.5%. The method was proved to be a convenient, rapid and practical method for sensitive determination of heterocyclic pesticides.

On-site sample preparation of trace aromatic amines in environmental waters with monolith-based multichannel in-tip microextraction apparatus followed by HPLC determination

A novel on-site preparation strategy for the determination of trace aromatic amines (AAs) in environmental waters was developed in the present study. To extract AAs effectively, 4-vinylbenzoic acid was copolymerized with ethylene dimethacrylate (ED)/divinylbenzene (DVB) in a pipette tip to obtain a new monolith-based adsorbent (MBA). The MBAs were employed as the extraction phases of home-made multichannel in-tip microextraction apparatus (ITMA) which was used to perform field sample preparation of AAs in different water samples followed by HPLC/DAD analysis. Due to the abundant functional groups, the prepared MBA displayed satisfying extraction performance for studied AAs. Under the optimized conditions, limits of detection varied from 2.1 to 26 ng/L with good coefficients of determination and precision. The recoveries for real water samples with different fortified concentrations were in the range of 78.1-119%, and the RSD values varied from 0.85 to 11%. In addition, the results achieved with the introduced method were well comparable to that obtained with conventional laboratory sample pretreatment process. Compared with existing approaches, the proposed method exhibits some merits such as s high throughput, good sensitivity and eco-friendliness. Most of important, the MBA/ITMA for on-site preparation avoids the storage and transportation of large volumes of waters, and guarantees the analytical accuracy of studied AAs.

Dispersive solid-phase extraction of buprenorphine from biological fluids using metal-organic frameworks and its determination by ultra-performance liquid chromatography

In this work, various types of metal-organic frameworks were synthesized, and their affinities toward buprenorphine were evaluated using dispersive solid-phase extraction. The extracted buprenorphine was determined by ultra high performance liquid chromatography-ultraviolet detection system. The highest extraction recovery was observed by employing zeolitic imidazole framework-67. Then, a facile and fast extraction method was designed for the extraction and purification of the target drug. Optimization of the extraction method was carried out by the design of experiment approach. A linearity range of 1-1000 μg/L with the limit of detection of 0.15 μg/L and relative standard deviations (50 μg/L, n = 5) of 3.4% was obtained for standard sample analysis. Under optimized experimental and instrumental conditions, the relative recoveries were in the range of 95 to 111%. Eventually, zeolitic imidazole framework-67 was successfully employed for the extraction and determination of buprenorphine in the biological fluids with satisfactory results.

Liquid chromatographic determination of trace levels of nitrophenols in water samples after dispersive magnetic solid phase extraction

An efficient and fast dispersive magnetic solid phase extraction method was developed using MIL-101(Cr)/poly (mercaptobenzothiazole)@magnetite nanoparticles for the preconcentration and determination of nitrophenols in river and rain water samples. High-performance liquid chromatography-Ultraviolet instrument was applied for the analysis of target nitrophenols. The effect of several variables on the extraction performance was explored via design of experiment approach. Limits of detection and linear dynamic ranges were attained in the range of 0.05-0.10 µg/L and 0.2-250 µg/L, respectively. The enrichment factors were in the range of 317-363. The precision (n = 3) of dispersive magnetic solid phase extraction method was in the range of 5.3-6.8%. Eventually, the method was utilized for the analysis of target nitrophenols in river and rain water samples.

Trace determination and characterization of ginsenosides in rat plasma through magnetic dispersive solid-phase extraction based on core-shell polydopamine-coated magnetic nanoparticles

Enrichment of trace bioactive constituents and metabolites from complex biological samples is challenging. This study presented a one-pot synthesis of magnetic polydopamine nanoparticles (Fe₃O₄@SiO₂@PDA NPs) with multiple recognition sites for the magnetic dispersive solid-phase extraction (MDSPE) of ginsenosides from rat plasma treated with white ginseng. The extracted ginsenosides were characterized by combining an ultra-high-performance liquid chromatography coupled to a high-resolution mass spectrometry with supplemental UNIFI libraries. Response surface methodology was statistically used to optimize the extraction procedure of the ginsenosides. The reusability of Fe₃O₄@SiO₂@PDA NPs was also examined and the results showed that the recovery rate exceeded 80% after recycling 6 times. Furthermore, the proposed method showed greater enrichment efficiency and could rapidly determine and characterize 23 ginsenoside prototypes and metabolites from plasma. In comparison, conventional methanol method can only detect 8 ginsenosides from the same plasma samples. The proposed approach can provide methodological reference for the trace determination and characterization of different bioactive ingredients and metabolites of traditional Chinese medicines and food.

•

The Fe₃O₄@SiO₂@PDA NPs were synthesized through one-pot method.

•

The RSM was designed to promote the extraction of trace active ingredients.

•

The MDSPE, UPLC-MS and UNIFI software were integrated into an analytical platform.

•

The synergetic strategy was applied to enrich ginsenosides from rat plasma.

•

The synergetic strategy provided an easy, rapid and sensitive method for analytes.

A nanosized magnetic metal-organic framework of type MIL-53(Fe) as an efficient sorbent for coextraction of phenols and anilines prior to their quantitation by HPLC

The authors describe the synthesis of a magnetic metal-organic framework (MOF) of type MIL-53(Fe) for coextraction of phenols and anilines from various environmental samples. A quick method for dispersive micro-solid phase extraction (D-μ-SPE) was developed for coextraction of the analytes 4-nitrophenol (4-NP), 4-chlorophenol (4-CP), 4-chloroaniline (4-CA), 1-amino-2-naphtol (1-A2N) and 2, 4-dichloroaniline (2, 4-DCA). The MOF was characterized by SEM, TEM, FT-IR, EDS, thermogravimetry, VSM and XRD. The method was optimized by response surface methodology combined with desirability function approach, specifically with respect to pH value of the sample, amount of sorbent, sorption time, salt concentration, sample volume, type and volume of the eluent, and elution time. Following elution with acetonitrile, the analytes were quantified by HPLC with photodiode array detection. Responses are linear in 0.1-2000 μg·L^-1 concentration ranges. The limits of detection and relative standard deviations (for n = 5) are in the range of 0.03-0.2 μg·L^-1 and 3.5-12.6%, respectively. Enrichment factors are 113, 61, 87, 144 and 114 for 4-NP, 4-CP, 4-CA, 1-A2N and 2,4-DCA, respectively. Recoveries from spiked samples ranged from 39.5 to 93.3%. The magnetic sorbent was successfully applied to the coextraction and determination of the analytes in river, rain and hookah water samples. Graphical abstract Schematic presentation for the synthesis of (a) Fe₃O₄ nanoparticles (NPs) and (b) Fe₃O₄@MIL-53(Fe). Fe₃O₄@MIL-53(Fe) was employed as a new nanosorbent in dispersive micro-solid phase extraction of phenols and anilines. The limits of detection are in the range of 0.03-0.2 μg·L^-1.

Determination of trace amounts of aromatic amines after magnetic solid-phase extraction using silver-modified Fe3 O4 /graphene nanocomposite

In this work, a fast and simple magnetic dispersive solid phase extraction methodology was developed utilizing Ag@magnetite nanoparticles@graphene nanocomposite as an efficient magnetic nanosorbent for preconcentration and determine of five aromatic amines in water samples. The sorbent was characterized by diverse characterization techniques. After the extraction, high-performance liquid chromatography with UV detection was utilized to analysis the aromatic amines. The effects of different factors on the extraction process were studied thoroughly via design of experiment and desirability function. Detection limits and linear dynamic ranges were obtained in the range of 0.10-0.20 and 0.3-300 μg/L, respectively. The relative standard deviations (n = 5) were in the range of 4.3-6.5%. Eventually, the method was employed for determination of target aromatic amines in various water samples.

Porous magnetized carbon sheet nanocomposites for dispersive solid-phase microextraction of organophosphorus pesticides prior to analysis by gas chromatography-ion mobility spectrometry

Carbon sheets were attached to magnetite (Fe₃O₄) nanoparticles. The resulting nanocomposite is shown to be a viable sorbent for use in magnetic dispersive solid-phase microextraction of three organophosphorus pesticides. The sorbent was synthesized via the sol-gel process followed by calcination and was characterized by an X-ray diffractometer, field emission scanning electron microscopy and energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and Raman spectrometry techniques. The affecting parameters in the adsorption and desorption steps were assessed and optimized via response surface methodology. Following desorption with dichloromethane, the OPPs were quantified by gas chromatography along with ion mobility spectrometry detection. Under optimized conditions, the limits of detection were 1.00, 0.46 and 0.85 μg L^-1 for fenthion, malathion and chlorpyrifos, respectively. Response is linear in the concentration range of 2-500 μg L^-1 for fenthion and malathion, and 2-1000 μg L^-1 for chlorpyrifos with the determination coefficient larger than 0.9969. The intra-day and inter-day precision were from 3 to 9% and 5 to 16%, respectively. The enrichment factor was greater than 142 for all the studied pesticides. The sorbent was used for analyze spiked water and vegetable samples and gave relative recovery higher than 82%. Graphical abstract A flowchart of the synthesis of porous magnetized carbon sheet nanocomposites and the process of the magnetic dispersive solid-phase microextraction (MD-μ-SPE) of three organophosphorus pesticides prior to analysis by gas chromatography-ion mobility spectrometry (GC-IMS).

Ultrasound combined with manganese-oxide nanoparticles loaded on activated carbon for extraction and pre-concentration of thymol and carvacrol in methanolic extracts of Thymus daenensis, Salvia officinalis, Stachys pilifera, Satureja khuzistanica, and mentha, and water samples

A dispersive micro solid-phase extraction (DMSPE) technique was developed using manganese-oxide nanoparticles loaded on activated carbon (Mn₃O₄-NPs-AC) as an effective sorbent combined with ultrasound for the extraction and determination of a trace amount of thymol and carvacrol in methanolic extracts of Thymus daenensis, Salvia officinalis, Stachys pilifera, Satureja khuzistanica and mentha, and water samples.

Micro-solid phase extraction of some polycyclic aromatic hydrocarbons from environmental water samples using magnetic β-cyclodextrin-carbon nano-tube composite as a sorbent

Previous studies have demonstrated the excellent capability of the cyclodextrins in pre-concentration of the organic pollutants from the aqueous solutions. In this work, β-cyclodextrin- multiwalled carbon nano-tube composite was produced from the reaction of oxidized carbon nano-tube with cyclodextrin in the presence of the hydrazine hydrate, and subsequently attaching this composite to the iron oxide nano-particles. Prepared magnetic nano-composite was characterized by the attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), the thermogravimetric analysis (TGA), the field emission scanning electron microscopy (FESEM), and the X-ray diffraction (XRD). This composite was applied to extract seven polycyclic aromatic hydrocarbons (PAHs) from the environmental water samples as follows: naphthalene, acenaphthene, fluorene, phenanthrene, fluoranthene, pyrene and benzo[a]pyrene. Analytes analysis was performed using the gas chromatography (GC) followed by the flame ionization detection (FID), and the predominant parameters influencing the extraction efficiency were investigated thoroughly. Under the optimized extraction conditions, the enrichment factor (EF) was ranging from 41.3 to 49.3 (EF_max = 50.0), and a suitable linearity was obtained (R² = 0.992-0.997) within the range of 2.0-1000 ng/mL. The limits of the quantification and detection were 2.0-10.0 and 0.6-3.0 ng/mL, respectively. Finally, the synthesized magnetic sorbent and method were successfully utilized for the analysis of rain, well and agricultural water samples. The relative recoveries were ranging from 75.3-107.0% with an acceptable precision (5.5-8.3%) for PAHs extraction.

Cu- and S- @SnO2 nanoparticles loaded on activated carbon for efficient ultrasound assisted dispersive µSPE-spectrophotometric detection of quercetin in Nasturtium officinale extract and fruit juice samples: CCD-RSM design

A simple, rapid, and efficient method of dispersive micro solid phase extraction (D-μ-SPE) combined with UV-Vis spectrophotometry via ultrasound-assisted (UA) was applied for the determination and preconcentration of quercetin in extract of watercress (Nasturtium officinale), fruit juice and water samples. The sorbent in this method was synthesized by doping copper and sulfide into the tetragonal structure of SnO₂-nanoparticles (Cu- and S- @SnO₂-NPs) and subsequently loading it on activated carbon (AC). The D-μ-SPE parameters with direct effect on the extraction efficiency of the targeted analyte, such as sample pH, volume of eluent, sorbent mass and ultrasound time were optimized using central composite design method. Under optimized conditions, the calibration graph for quercetin was linear in the range of 20-4000 ng mL^-1; the limit of detection and quantitation were 4.35 and 14.97 ng mL^-1, respectively and the enrichment factor was 95.24. Application of this method to analyze spiked extract, fruit juice and water samples resulted in acceptable recovery values ranging from 90.3% to 97.28% with intra-day and inter-day relative standard deviation values lower than 6.0% in all cases. Among the equilibrium isotherms tested, Langmuir was found to be the best fitted model with maximum sorption capacity of 39.37 mg g^-1, suggesting a homogeneous mode of sorption for quercetin.

Preparation of a magnetic multiwalled carbon nanotube@polydopamine/zeolitic imidazolate framework-8 composite for magnetic solid-phase extraction of triazole fungicides from environmental water samples

A novel magnetic zinc-based zeolitic imidazolate framework (MMP/ZIF-8) has been prepared using a magnetic multiwalled carbon nanotube@polydopamine nanocomposite as the magnetic core and support. It was then used as an adsorbent for magnetic solid-phase extraction of triazole fungicides from environmental water samples. Successful synthesis of MMP/ZIF-8 was confirmed by material characterization, and the results showed that the synthetic composite has a high Brunauer-Emmett-Teller surface area (141.56 m2 g-1), large total pore volume (0.636 mL g-1), and high superparamagnetism with a saturation magnetization of 44.1 emu g-1. To evaluate the extraction performance of MMP/ZIF-8, the main parameters that affect the extraction efficiency were optimized. Under the optimal conditions, the developed method shows good linearity (R 2 ≥ 0.9915) in the concentration range 1-400 μg L-1. Low limits of detection (0.08-0.27 μg L-1, signal/noise = 3 : 1) and good precision (intraday relative standard deviation ≤ 7.73%, interday relative standard deviation ≤ 9.65%) are also achieved. The developed method was applied for analysis of triazole fungicides in environmental water samples.

Synthesis of Fe3O4@CuS@Ni2P-CNTs magnetic nanocomposite for sonochemical-assisted sorption and pre-concentration of trace Allura Red from aqueous samples prior to HPLC-UV detection: CCD-RSM design

A simple procedure based on ultrasound-assisted (UA) dispersive micro solid phase extraction (D-μ-SPE) was applied for sorption of trace amount Allura Red (AR) in fruit juice and water samples. After loading process by UA-D-μ-SPE, the concentrated AR was eluted and monitored using high-performance liquid chromatography-ultraviolet -visible detector (HPLC-UV). The best operational conditions were obtained as follows: pH = 3.0, 8 mg of the sorbent, sonication time of 4.5 min and 0.16 mL of THF as elution solvent. Under the optimum operational conditions, the present method was acceptable for AR quantification in the range of 1.0-5000 ng mL^-1. The repeatability based on RSD with the amount of 1.67-3.18%, low LOD (0.198 ng mL^-1) and LOQ (0.659 ng mL^-1) were obtained. The UA-D-μ-SPE-HPLC-UV method was successfully applied for trace quantification of AR from water and commercial fruit juice samples supplied from local supermarkets, and acceptable relative recoveries over the range of 97.7-105.4% with RSDs ≤5.50% were obtained.

Ultrasonically synthesis of Mn- and Cu- @ ZnS-NPs-AC based ultrasound assisted extraction procedure and validation of a spectrophotometric method for a rapid preconcentration of Allura Red AC (E129) in food and water samples

This study is devoted on Allura Red as food colorant preconcentration and determination in beverage, fruit juice and drink water samples is based on usage of Mn- and Cu- @ ZnS-NPs-AC as new sorbent for ultrasound-assisted-dispersive solid-phase microextraction (UA-DSPME) combined with ultraviolet-visible spectrophotometric based method (UV-Vis). Contribution of volume of eluent, pH, sorbent mass and sonication time on response following conduction of 28 experiments were optimized and investigated while their significantly justified according to p-value. Values of "Prob > F" less than 0.0500 is proportional with their significant influence on recovery of analyte. Under the optimum conditions 0.14 mL of THF; pH of 2.5; 8 mg of sorbent and 3 min sonication time guide and help achievement of limit of quantification (LOQ) and limit of detection (LOD) of 6.08 and 20.26 ng mL^-1, respectively. The accuracy of method was validated according to calculation of recovery following spiking 400 and 600 ng mL^-1 to blank solution and recovery as more reliable indication of accuracy 93.41 and 102.17% recoveries with RSD < 3.5%, which demonstrate the successful applicability of present method for real sample analysis. The maximum sorbent capacity was 50.0 mg g^-1 based on Langmuir isotherm as best model with high correlation coefficient. Combination of UA-DSPME and UV-Vis lead to higher sensitivity and lower cost for accurate and repeatable monitoring of Allura Red level in beverage, fruit juice and drink water samples with acceptable recovery and reasonable RSD%.

Preconcentration of Trace Neonicotinoid Insecticide Residues Using Vortex-Assisted Dispersive Micro Solid-Phase Extraction with Montmorillonite as an Efficient Sorbent

In this work, we investigated montmorillonite for adsorption of neonicotinoid insecticides in vortex-assisted dispersive micro-solid phase extraction (VA-d-μ-SPE). High-performance liquid chromatography with photodiode array detection was used for quantification and determination of neonicotinoid insecticide residues, including thiamethoxam, clothianidin, imidacloprid, acetamiprid, and thiacloprid. In this method, the solid sorbent was dispersed into the aqueous sample solution and vortex agitation was performed to accelerate the extraction process. Finally, the solution was filtered from the solid sorbent with a membrane filter. The parameters affecting the extraction efficiency of the proposed method were optimized, such as amount of sorbent, sample volume, salt addition, type and volume of extraction solvent, and vortex time. The adsorbing results show that montmorillonite could be reused at least 4 times and be used as an effective adsorbent for rapid extraction/preconcentration of neonicotinoid insecticide residues. Under optimum conditions, linear dynamic ranges were achieved between 0.5 and 1000 ng mL^-1 with a correlation of determination (R²) greater than 0.99. Limit of detection (LOD) ranged from 0.005 to 0.065 ng mL^-1, while limit of quantification (LOQ) ranged from 0.008 to 0.263 ng mL^-1. The enrichment factor (EF) ranged from 8 to 176-fold. The results demonstrated that the proposed method not only provided a more simple and sensitive method, but also can be used as a powerful alternative method for the simultaneous determination of insecticide residues in natural surface water and fruit juice samples.

A molecularly imprinted polymer coupled with high-performance liquid chromatography-UV for the determination of albendazole in plasma and urine samples: CCD-RSM design

The present study attempted to develop a fast and sensitive ultrasound-assisted-dispersive-micro-solid phase extraction method for the separation and preconcentration of albendazole from plasma and urine samples.

Simple and selective detection of quercetin in extracts of plants and food samples by dispersive-micro-solid phase extraction based on core–shell magnetic molecularly imprinted polymers

In the present study, a D-μ-SPE clean-up method was established for the analysis of quercetin in extracts of plants and food samples using a magnetic molecularly imprinted polymer as the sorbent by HPLC-UV detection.

Fabrication and evaluation of magnetic phosphodiesterase-5 linked nanoparticles as adsorbent for magnetic dispersive solid-phase extraction of inhibitors from Chinese herbal medicine prior to ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry analysis

In the present study, the preparation of the magnetic phosphodiesterase-5 linked Fe₃O₄@ SiO₂ nanoparticles was successfully achieved by amide reaction and the magnetic phosphodiesterase-5 linked Fe₃O₄@SiO₂ nanoparticles were evaluated as a new adsorbent for magnetic dispersive solid-phase extraction of ligands from medicinal plant samples before the analysis by UHPLC-Q-TOF/MS. The prepared phosphodiesterase-5 linked Fe₃O₄@SiO₂ nanoparticles were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, vibration sample magnetometer and potential laser particle size analyzer. The effects of EDC concentration, incubation time and bead-protein ratio on the amount of immobilized protein were studied. The main experimental parameters affect extraction efficiency of ligands, such as wash times, wash solvents, incubation pH, ion strength and incubation temperature, were investigated and optimized by using echinacoside as a model compound. The absolute recovery of echinacoside was ranged from 98.36%-102.16% in Cistanche tubulosa sample under the optimal extraction conditions. Good linearity was observed in the investigated concentration range of 0.006 mgmL^-1-0.97 mgmL^-1(R² = 0.9999). The limit of detection was 0.002 mgmL^-1. The RSDs of within-day and between-day precision were less than 2.3%. Due to the excellent magnetic behavior of Fe₃O₄@SiO₂ nanoparticles, the proposed method was shown to be simple and rapid. Remarkably, the magnetic phosphodiesterase-5 linked Fe₃O₄@SiO₂ nanoparticles could be recycled for ten times with loss of 10% activity.