QuEChERS and ultra-high performance liquid chromatography–tandem mass spectrometry method for the determination of parabens and ultraviolet filters in human milk samples

Metal organic framework derived composite as a new sorbent for micro-solid phase extraction of parabens from breast milk samples

In an attempt to enhance the adsorptive properties while addressing the limitations associated with powdered nature, zeolitic imidazolate framework (ZIF-67)-derived cobalt-doped nanoporous carbon (Co-NPC) was incorporated into chitosan and then shaped like hollow fiber by a simple casting method. Further modification with polyaniline (PANI) was also performed to improve extraction efficacy. The applicability of the modified hollow fibers was then investigated by packing them into a cartridge and utilizing them for conducting hollow fibers-packed in-cartridge micro solid-phase extraction (HF-IC µ-SPE) of parabens including methylparaben (MP), ethylparaben (EP), and propylparaben (PP) from human breast milk samples. Factors affecting extraction performance were studied using central composite design (CCD). Under the optimal conditions, good linearity was achieved within the range of 0.5-500 μg L-1 with the determination coefficient (R2) higher than 0.9901. All analytical parameters were obtained by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. In this regard, the limits of detection values (LODs) were 0.5 to 1.0 μg L-1. Intra- and inter-assay precision RSDs % were lower than 7.9 % and 8.4 %, respectively. Relative recoveries of breast milk samples were found in the range of 88.0-109.5 %. Accordingly, the novel nanocomposite sorbent based on PANI@Co-NPC/Chitosan hollow fiber was found to be an efficient, simple, and cost-effective packing material for HF-IC µ-SPE. It can also be offered as a promising alternative adsorbent to coated conventional hollow fiber.

An optimized methodology for the determination of multiclass organic ultraviolet sunscreens and metabolites in human milk through chromatographic and chemometric resolution

Organic UV filters (UVFS) are used to mitigate the dermal effects associated with health risks from UV radiation, making them essential in personal care products. UVFS are frequently identified in environmental samples due to their high lipophilicity and persistence, underscoring the urgency of comprehensive assessments and regulatory measures aimed at safeguarding ecosystems and human health. The present study reports a multiclass analytical method for determining 16 UV sunscreens and metabolites in breast milk based on an ultrasound-assisted-dispersive liquid-liquid micro-extraction (UA-DLLME) with further chromatographic and chemometric resolution. The experimental conditions of the UA-DLLME were optimized through the implementation of the Design of Experiment tools. To model the responses, least-squares and artificial neural network methodologies were implemented. The optimal conditions were found by employing the desirability function. The samples were analyzed through reverse-phase liquid chromatographic separation, UV diode array, and fast-scanning fluorescence detection. The chromatographic analysis enabled the resolution of 16 analytes in a total time of 13.0 min. Multivariate curve resolution-alternating least-square (MCR-ALS) modelling was implemented to resolve analytes that were not fully resolved and to determine analytes that coeluted with endogenous components of the breast milk samples. An enrichment factor of 5-fold concentration was obtained with this methodology, reaching recoveries between 65 % and 105 % for 13 multiclass UV sunscreens and metabolites in breast milk samples with RSD % and REP % lower than 12 %.

Determination of parabens in breast milk using stir bar sorptive extraction coupled with UHPLC-UV

We developed an analytical method based on ultra-high performance liquid chromatography with UV detection, using a stir bar coated with amino/hydroxyl bifunctional microporous organic network (B-MON), for the analysis of parabens in breast milk samples. B-MON demonstrated superior performance with maximal methylparaben adsorption of 112.15 mg/g. Kinetic fitting revealed that outer diffusion was the key limiting step, and the adsorption was chemisorption. The thermodynamic analysis demonstrated that increased methylparaben adsorption was found at higher temperatures in spontaneous processes. The developed approach showed excellent linearity (R2 ≥ 0.9964) and a low detection limit (0.01 μg/L). Recoveries ranged from 85.8 to 105.5 % and the relative standard deviation was lower than 9.2 %. Based on the daily exposure assessment, these pollutants do not pose unacceptable health hazards to babies. However, the high detection frequencies (41.9%-93.5 %) suggest that breast milk still should be monitored.

Quantification of parabens in marine fish samples by a rapid, simple, effective sample preparation method

Parabens (p-hydroxybenzoic acid esters) commonly used preservatives (in cosmetics, pharmaceuticals, and foods) can pose potential effects on environmental health. In this study, seven parabens were quantified in marine fish samples using an ultra-high performance liquid chromatography triple quadrupole mass spectrometer (UHPLC-MS/MS) system. Parabens in the fish samples were extracted and purified by a rapid, simple, and effective procedure comprising sample homogenization with solvent, solid-phase extraction clean-up, and solvent evaporation. Results demonstrated that the recoveries of seven compounds (with relative standard deviation < 15%) were 88-103% in matrix-spike samples and 86-105% in surrogate standards. The method detection limits and method quantification limits of seven parabens were 0.015-0.030 and 0.045-0.090 ng/g-ww (wet weight), respectively. The optimized method was applied to measure the concentration of parabens in the 37 marine fish samples collected from Vietnam coastal waters. The concentration ranges of seven parabens found in round scad and greater lizardfish samples were 6.82-25.3 ng/g ww and 6.21-17.2 ng/g-ww, respectively. Among parabens, methylparaben accounted for the highest contribution in both fish species (43.2 and 44.9%, respectively). Based on the measured concentrations of parabens in marine fish samples, the estimated daily intake was calculated for children and adults with the corresponding values of 0.0477 µg/kg/day and 0.0119 µg/kg/day, respectively. However, the presence of parabens in Vietnamese marine fish may not pose a significant risk to human health.

Butylparaben weakens female fertility via causing oocyte meiotic arrest and fertilization failure in mice

Butylparaben is an ubiquitous environmental endocrine disruptor, that is commonly used in cosmetics and personal care product due to its anti-microbial properties. Butylparaben has been shown to cause developmental toxicity, endocrine and metabolic disorders and immune diseases. However, little is known about the impact on female fertility, especially oocyte quality. In the present study, we reported that butylparaben influenced female fertility by showing the disturbed oocyte meiotic capacity and fertilization potential. Specifically, butylparaben results in the oocyte maturation arrest by impairing spindle/chromosome structure and microtubule stability. Besides, butylparaben results in fertilization failure by impairing the dynamics of Juno and ovastacin and the sperm binding ability. Last, single-cell transcriptome analysis showed that butylparaben-induced oocyte deterioration was caused by mitochondrial dysfunction, which led to the accumulation of ROS and occurrence of apoptosis. Collectively, our study indicates that mitochondrial dysfunction and redox perturbation is the major cause of the weakened female fertility expoesd to butylparaben.

Primary and ultimate degradation of benzophenone-type UV filters under different environmental conditions and the underlying structure-biodegradability relationships

Ten common benzophenone-based UV filters (BPs), sharing the same basic structure and differing only in their substituents, were investigated with respect to their primary and ultimate biodegradability. This study was carried out in order to gain deeper insights into the relationship between structure and biodegradability. The primary biodegradation of the selected BPs was studied in river water at environmentally relevant concentrations (1 µg/L) while varying specific, crucial environmental conditions (aerobic, suboxic, supplementation of nutrients). For this purpose, both batch and column degradation tests were performed, which allowed a systematic study of the effects. Subsequently, the ultimate biodegradation, i.e. the potential to achieve full mineralization of BPs, was examined according to OECD guideline 301 F. The results indicate that mineralization is limited to derivatives in which both aromatic rings contain substituents. This hypothesis was supported by docking simulations showing systematic differences in the orientation of BPs within the active site of the cytochrome P450 enzyme. These differences in orientation correspond to the substitution pattern of the BPs. This study provides valuable insights for assessing the environmental hazards of this class of trace organic compounds.

Polyvinyl alcohol-based hydrogel sorbent for extraction of parabens in human milk samples by in-tube SPME–LC–UV

In this work, we developed an in-tube solid-phase microextraction (SPME) device consisting of a fused silica capillary modified with a polyvinyl alcohol (PVOH) hydrogel. Methylparaben, ethylparaben, propylparaben, and butylparaben were determined in human milk samples by using the in-tube SPME device coupled with liquid chromatography with spectrophotometric detection in the ultraviolet region (LC-UV). The inner surface of the fused silica capillary was silanized to allow covalent modification with the PVOH-hydrogel, using glutaraldehyde as cross-linking agent. The developed device was used up to 250 times with no reduction in the analytes' peak areas or carryover effect, besides having a low production cost. The human milk samples showed a significant matrix effect for parabens with higher logKo/w. Low limits of quantification (LLOQ) between 10.0 and 15.0 ng mL-1 were obtained with RSD values in the range of 1.18 to 18.3%. For the intra- and inter-day assays, RSD values from 5.6 to 16.5% and accuracy from 74.5 to 128.8% were achieved. The PVOH-based hydrogel sorbent allowed the use of water as desorption solvent, eliminating the use of organic solvents, which follows the principles of green chemistry. The results showed a great application potential of the PVOH-based hydrogel sorbent for the extraction of organic compounds from high-complexity samples.

Determination of UV Filters in Waste Sludge Using QuEChERS Method Followed by In-Port Derivatization Coupled with GC-MS/MS

UV filters (UVFs) are widely used in personal care and in industrial products for protection against photodegradation. In recent years, their potential toxicological and environmental effects have received growing attention. Due to their excessive use, their residue levels in the environment are gradually increasing and they tend to accumulate on biological wastewater treatment sludge. The utilization of sludge as fertilizer could be one of the main routes of UVF contamination in the environment. Therefore, the development of a reliable and sensitive method of analyzing their trace level residues in waste sludge samples is of great importance. The success of the method largely depends on the sample preparation technique in such complex matrices. This study presents a rapid, sensitive and green analysis method for eight UVFs in sludge samples, selected for their rather low no-observed-effect concentrations (NOEC). For this purpose, the QuEChERS methodology was coupled with in-port derivatization for subsequent detection of the targeted UVFs via GC−MS/MS. The analysis time was substantially shortened using this method, and reagent utilization was also reduced. The method was validated in the sludge samples, and high recovery (66−123%) and low RSD values (<25.6%) were obtained. In addition, major contributing uncertainty sources and expanded uncertainties were determined.

Structure-related endocrine-disrupting potential of environmental transformation products of benzophenone-type UV filters: A review

Benzophenone-type UV filters (BPs) represent a very diverse group of chemicals that are used across a range of industrial sectors around the world. They are found within different environmental compartments (e.g. surface water, groundwater, wastewater, sediments and biota) at concentrations ranging from ng/L to mg/L. Some are known as endocrine disruptors and are currently within the scope of international regulations. A structural alert for high potential of endocrine disrupting activity was assigned to 11 BP derivatives. Due to the widespread use, distribution and disruptive effects of some BPs, knowledge of their elimination pathways is required. This review demonstrates that biodegradation and photolytic decomposition are the major elimination processes for BP-type UV filters in the environment. Under aerobic conditions, transformation pathways have only been reported for BP, BP-3 and BP-4, which are also the most common derivatives. Primary biodegradation mainly results in the formation of hydroxylated BPs, which exhibit a structure-related increase in endocrine activity when compared to their parent substances. By combining 76 literature-based transformation products (TPs) with in silico results relating to their receptor activity, it is demonstrated that 32 TPs may retain activity and that further knowledge of the degradation of BPs in the environment is needed.

Concentrations of bisphenols, parabens, and benzophenones in human breast milk: A systematic review and meta-analysis

BACKGROUND

Breast milk is the main source of nutrition for infants but may be responsible for their exposure to environmental chemicals, including endocrine-disrupting chemicals.

AIM

To review available evidence on the presence and concentrations of bisphenols, parabens (PBs), and benzophenones (BPs) in human milk and to explore factors related to exposure levels.

METHODS

A systematic review was carried out using Medline, Web of Science, and Scopus databases, conducting a comprehensive search of peer-reviewed original articles published during the period 2000-2020, including epidemiological and methodological studies. Inclusion criteria were met by 50 studies, which were compiled by calculating weighted detection frequencies and arithmetic mean concentrations of the chemicals. Their risk of bias was assessed using the ROBINS-I checklist.

RESULTS

Among the 50 reviewed studies, concentrations of bisphenols were assessed by 37 (74.0%), PBs by 21 (42.0%), and BPs by 10 (20.0%). Weighted detection frequencies were 63.6% for bisphenol-A (BPA), 27.9-63.4% for PBs, and 39.5% for benzophenone-3 (BP-3). Weighted mean concentrations were 1.4 ng/mL for BPA, 0.2-14.2 ng/mL for PBs, and 24.4 ng/mL for BP-3. Mean concentrations ranged among studies from 0.1 to 3.9 ng/mL for BPA, 0.1 to 1063.6 ng/mL for PBs, and 0.5 to 72.4 ng/mL for BP-3. The highest concentrations of BPA and PBs were reported in samples from Asia (versus America and Europe). Higher BPA and lower methyl-paraben concentrations were observed in samples collected after 2010. Elevated concentrations of these chemicals were associated with socio-demographic and lifestyle factors in eight studies (16.0%). Two epidemiological studies showed moderate/serious risk of bias.

CONCLUSIONS

This systematic review contributes the first overview of the widespread presence and concentrations of bisphenols, PBs, and BPs in human breast milk, revealing geographical and temporal variations. The methodological heterogeneity of published studies underscores the need for well-conducted studies to assess the magnitude of exposure to these chemicals from human milk.

A simple, rapid and sensitive method for the simultaneous determination of eighteen environmental phenols in human urine

Environmental phenols are a typical group of endocrine disrupting compounds (EDCs) and have caused growing concerns upon the potential adverse effects on humans. Urinary concentrations of phenols can be used as valid biomarkers for the assessment of human exposure. A method was developed for the simultaneous determination of eighteen environmental phenols (six parabens, seven bisphenols, four benzophenones and triclosan) in human urine using liquid-liquid extraction (LLE) coupled to high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The optimized LLE was time saving and required low volumes of organic solvents. A volume of only 0.2 mL urine sample was extracted and analyzed. The method yielded good linearity (0.9925-0.9994) and satisfactory limit of detection (LOD) (≤0.08 ng mL^-1). The relative recoveries ranged between 76.7% and 116% at three spiked levels, with intra- and inter-day precision less than 8.04% and 13.5%, respectively. Our method has been proved to be simple, rapid and sensitive by a comprehensive comparison between methods. This proposed method provides a large-scale biomonitoring tool for exposure assessment of human population to environmental phenols.

An Overview of the Analytical Methods for the Determination of Organic Ultraviolet Filters in Cosmetic Products and Human Samples

UV filters are a group of compounds commonly used in different cosmetic products to absorb UV radiation. They are classified into a variety of chemical groups, such as benzophenones, salicylates, benzotriazoles, cinnamates, p-aminobenzoates, triazines, camphor derivatives, etc. Different tests have shown that some of these chemicals are absorbed through the skin and metabolised or bioaccumulated. These processes can cause negative health effects, including mutagenic and cancerogenic ones. Due to the absence of official monitoring protocols, there is an increased number of analytical methods that enable the determination of those compounds in cosmetic samples to ensure user safety, as well as in biological fluids and tissues samples, to obtain more information regarding their behaviour in the human body. This review aimed to show and discuss the published studies concerning analytical methods for the determination of organic UV filters in cosmetic and biological samples. It focused on sample preparation, analytical techniques, and analytical performance (limit of detection, accuracy, and repeatability).

Review of the safety of application of cosmetic products containing parabens

Cosmetics are a source of lifetime exposure to various substances including parabens, being the most popular synthetic preservatives. Because the use of cosmetics shows an increasing trend and some adverse health outcomes of parabens present in these products have been reported, the present review focused on the safety of dermal application of these compounds. Special attention has been paid to the absorption of parabens and their retention in the human body in the intact form, as well as to their toxicological characteristics. Particular emphasis has been placed on the estrogenic potential of parabens. Based on the available published data of the concentrations of parabens in various kinds of cosmetics, the average ranges of systemic exposure dose (SED) for methylparaben, ethylparaben, propylparaben, and butylparaben have been calculated. Safety evaluations [margin of safety (MoS)] for these compounds, based on their aggregate exposure, have also been performed. Moreover, evidence for the negative impact of methylparaben on skin cells has been provided, and the main factors that may intensify dermal absorption of parabens and their impact on the skin have been described. Summarizing, the use of single cosmetics containing parabens should not pose a hazard for human health; however, using excessive quantities of cosmetic preparations containing these compounds may lead to the development of unfavorable health outcomes. Due to the real risk of estrogenic effects, as a result of exposure to parabens in cosmetics, simultaneous use of many cosmetic products containing these preservatives should be avoided.

Determination of Intact Parabens in the Human Plasma of Cancer and Non-Cancer Patients Using a Validated Fabric Phase Sorptive Extraction Reversed-Phase Liquid Chromatography Method with UV Detection

Parabens have been widely employed as preservatives since the 1920s for extending the shelf life of foodstuffs, medicines, and daily care products. Given the fact that there are some legitimate concerns related to their potential multiple endocrine-disrupting properties, the development of novel bioanalytical methods for their biomonitoring is crucial. In this study, a fabric phase sorptive extraction reversed-phase liquid chromatography method coupled with UV detection (FPSE-HPLC-UV) was developed and validated for the quantitation of seven parabens in human plasma samples. Chromatographic separation of the seven parabens and p-hydroxybenzoic acid was achieved on a semi-micro Spherisorb ODS1 analytical column under isocratic elution using a mobile phase containing 0.1% (v/v) formic acid and 66% 49 mM ammonium formate aqueous solution in acetonitrile at flow rate 0.25 mL min⁻¹ with a 24-min run time for each sample. The method was linear at a concentration range of 20 to 500 ng mL⁻¹ for the seven parabens under study in human plasma samples. The efficiency of the method was proven with the analysis of 20 human plasma samples collected from women subjected to breast cancer surgery and to reconstructive and aesthetic breast surgery. The highest quantitation rates in human plasma samples from cancerous cases were found for methylparaben and isobutylparaben with average plasma concentrations at 77 and 112.5 ng mL⁻¹. The high concentration levels detected agree with previous findings for some of the parabens and emphasize the need for further epidemiological research on the possible health effects of the use of these compounds.

Simultaneous Determination of Isothiazolinones and Parabens in Cosmetic Products Using Solid-Phase Extraction and Ultra-High Performance Liquid Chromatography/Diode Array Detector

Isothiazolinones methylisothiazolinone (MI) and methylchloroisothiazolinone (MCI), and parabens methylparaben (MP), ethylparaben (EP), propylparaben (PP) and butylparaben (BP) are the most common synthetic preservatives. They are all known to be potential skin allergens that lead to contact dermatitis. Thus, the identification of these unsafe chemicals in cosmetic products is of high importance. In the present study, solid-phase extraction (SPE) based on HyperSep reversed-phase C8/benzene sulfonic acid ion exchanger (HyperSep C8/BSAIE) and Sep-Pak C18 sorbents, and ultra-high performance liquid chromatography/diode array detector (UHPLC/DAD) were optimized for the simultaneous determination of MI, MCI, MP, EP, PP and BP in cosmetic products. HyperSep C8/BSAIE and UHPLC/DAD with the eluting solvent mixture (acetonitrile/methanol, 2:1, v/v) and detection wavelength (255 nm) were found to be the optimal conditions, respectively. The method illustrates the excellent linearity range (0.008–20 μg/mL) with coefficient of determination (R², 0.997–0.999), limits of detection (LOD, 0.001–0.002 μg/mL), precision in terms of relative standard deviation (RSD < 3%, intra-day and <6%, inter-day) when examining a standard mixture at low (0.07 µg/mL), medium (3 µg/mL) and high (15 µg/mL) concentrations. A total of 31 cosmetic samples were studied, achieving concentrations (MI, not detected (nd)-0.89 µg/g), (MCI, nd-0.62 µg/g), (MP, nd-6.53 µg/g), (EP, nd-0.90 µg/g), (PP, nd-9.69 µg/g) and (BP, nd-17.80 µg/g). Recovery values ranged from 92.33 to 101.43% depending on the types of sample. To our knowledge, this is the first specific method which covers the theme and describes background amounts of such preservatives in cosmetics.

Synthesis of Magnetic Molecularly Imprinted Polymer Sorbents for Isolation of Parabens from Breast Milk

Magnetic molecularly imprinted polymers (MMIPs) are an invaluable asset in the development of many methods in analytical chemistry, particularly sample preparation. Novel adsorbents based on MMIPs are characterized by high selectivity towards a specific analyte due to the presence of a specific cavity on their polymer surface, enabling the lock-key model interactions to occur. In addition, the magnetic core provides superparamagnetic properties that allow rapid separation of the sorbent from the sample solution. Such a combination of imprinted polymers with a magnetic core has an innovative influence on the development of separation techniques. Hence, the present study describes the synthesis of MMIPs with 17β-estradiol used as a template molecule in the production of imprinted polymers. The as-prepared sorbent was used for a sorption/desorption study of five parabens from breast milk samples. The obtained results were characterized by sorption efficiency exceeding 92%, which shows the high affinity of the analytes to the functional groups on the sorbent. The final determination of the selected analytes was done with high-performance liquid chromatography using a fluorometric detector. The determined linearity ranges for selected parabens were characterized by high determination coefficients (r² from 0.9992 to 0.9999), and the calculated limit of detection (LOD) and limit of quantification (LOQ) for the identified compounds were low (LOD from 1.1-2.7 ng mL^-1; LOQ from 3.6-8.1 ng mL^-1), which makes their quantitative analysis in real samples feasible.

Biomonitoring of parabens in human milk and estimated daily intake for breastfed infants

In this study, we assessed the presence of four parabens in human milk of 120 mothers from Valencia (Spain) which took part in a human biomonitoring project (BETTERMILK). The detection frequency ranges of parabens were 41-60% and 61-89% for unconjugated- and total (unconjugated + conjugated)-parabens, respectively. The concentrations ranged from <LoQ to 31 ng/mL and from <LoQ to 49 ng/mL for unconjugated- and total-parabens, respectively. The frequency of use of some cosmetic products and human milk protein levels were the main predictors of parabens in milk. The study evidences the presence of both conjugated and unconjugated paraben forms in human milk. The newborns estimated daily intake of parabens through human milk was several orders of magnitude lower than the 0-10 mg/kg bw-day acceptable daily intake for the sum of methyl and ethyl paraben established by EFSA. To our knowledge, this is currently the largest biomonitoring study of parabens in human milk.

QuEChERS pretreatment combined with high-performance liquid chromatography-tandem mass spectrometry for determination of aristolochic acids I and II in Chinese herbal patent medicines

Aristolochic acid I and II (AA I and II), a kind of nephrotoxic and carcinogenic compound, are widely added in Chinese herbal patent medicines though they have been banned due to their toxicity. However, the traditional sample pre-treatment combined with the LC-MS analysis system is not effective to determine AAs in such complicated patent medicines. The QuEChERS pretreatment method possesses some merits such as being quick and effective. In this work, the modified QuEChERS method was first used to determine AA I and II in Chinese herbal patent medicines combined with the HPLC-MS/MS analysis system. Extraction and removal of target analytes from powder, tablet, and capsule samples were conducted using the modified QuEChERS pretreatment. The liquid extracts of Chinese herbal patent medicines could be analyzed directly. The method optimization results show that average recoveries ranged from 96.6% to 110.3% with relative standard deviations ranging from 4.2% to 13.0%. The quantization limits of the three selected matrices are estimated as follows (AA I/II): 2.8/6.5 ng mL^−l in liquid herbal extract, 6.5/12.5 ng g⁻¹ in tablets, and 22.1/42.1 ng g⁻¹ in capsules. This method was conducted to investigate the presence of AAs, which are a type of nephrotoxic and carcinogenic carboxylic acid, in 30 herbal products sold through the Internet in China. AA I and II were detected in 53% and 20%, respectively, of tested samples.

Aristolochic acid I and II (AA I and II), a kind of nephrotoxic and carcinogenic compound, are widely added in Chinese herbal patent medicines though they have been banned due to their toxicity.

Parabens in breast milk and possible sources of exposure among lactating women in Korea

Parabens, broad-spectrum antimicrobial preservatives widely used in various consumer products and food, are suspected to be linked with several adverse health effects in humans, especially newborn babies, infants, and young children. While human exposure to parabens has been frequently reported by measuring the concentration of parabens in urine, similar measurements in breast milk have rarely been made. To determine paraben concentrations in breast milk and possible sources of exposure, four major parabens, including methylparaben (MP), ethylparaben (EP), propylparaben (PP), and butylparaben (BP) were measured in breast milk samples collected from 260 lactating women in South Korea. Demographic, socioeconomic, and behavioral factors associated with the presence of parabens in breast milk were determined. EP concentrations were detected at the highest levels in breast milk samples, followed by MP, PP, and BP. Pre-pregnancy BMI, parity, use of basic skin care products, use of cosmetics, canned beverage, and type of milk consumption were associated with higher frequencies of paraben detection. In addition, type of milk, parity, and drinking status were significantly associated with the concentration of EP. Multiple regression analyses showed that colostrum and transitional milk samples had higher levels of EP than mature milk samples. The estimated daily intake of parabens in infants via breastfeeding appears to be negligible when compared to the acceptable daily intake values set forth by the European Food Safety Authority (EFSA); however, considering the vulnerability of breastfed infants and ubiquitous sources of exposure from daily use of household and personal toiletries, efforts to identify sources and mitigate exposure are warranted.

QuEChERS - Fundamentals, relevant improvements, applications and future trends

The Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method is a simple and straightforward extraction technique involving an initial partitioning followed by an extract clean-up using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS approach was developed for recovering pesticide residues from fruits and vegetables, but rapidly gained popularity in the comprehensive isolation of analytes from different matrices. According to PubMed, since its development in 2003 up to November 2018, about 1360 papers have been published reporting QuEChERS as extraction method. Several papers have reported different improvements and modifications to the original QuEChERS protocol to ensure more efficient extractions of pH-dependent analytes and to minimize the degradation of labile analytes. This analytical approach shows several advantages over traditional extraction techniques, requiring low sample and solvent volumes, as well as less time for sample preparation. Furthermore, most of the published studies show that the QuEChERS protocol provides higher recovery rate and a better analytical performance than conventional extraction procedures. This review proposes an updated overview of the most recent developments and applications of QuEChERS beyond its original application to pesticides, mycotoxins, veterinary drugs and pharmaceuticals, forensic analysis, drugs of abuse and environmental contaminants. Their pros and cons will be discussed, considering the factors influencing the extraction efficiency. Whenever possible, the performance of the QuEChERS is compared to other extraction approaches. In addition to the evolution of this technique, changes and improvements to the original method are discussed.

Development and optimization of a QuEChERS-GC-MS/MS methodology to analyse ultraviolet-filters and synthetic musks in sewage sludge

A Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) methodology followed by gas chromatography-triple quadrupole mass spectrometry (GC-MS/MS) analysis was developed to extract synthetic musk compounds (SMCs) (6 polycyclic, 2 macrocyclic and 5 nitro musks) and ultraviolet-filters (UVFs) (6 compounds) from sludge. This methodology fills a gap in the literature, since the proposed technique does not require specific equipment, nor large amounts of solvents, sorbents and time to extract SMCs and UVFs from sludge. To optimize this new methodology, a design of experiments (DoE) approach was used, applying first a screening design (SD) and then a central composite design (CCD). The best conditions achieved to extract these 19 compounds simultaneously were: 500 mg freeze dried sludge, 2.5 min of vortex and 15 min ultrasound and the use of a QuEChERS for the dispersive solid-phase extraction (d-SPE) containing 500 mg MgSO₄, 410 mg C18 and 315 mg PSA. Then, this methodology was successfully validated. Recoveries of the target compounds ranged from 75% (cashmeran, DPMI) to 122% (2‑ethylhexyl 4‑methoxycinnamate, EHMC), with good repeatability (relative standard deviation < 10%). The instrumental detection limits (IDLs) and quantification (IQLs) varied from 0.001 pg (musk moskene, MM) to 7.5 pg (musk xylene, MX) and from 0.003 (MM) to 25 pg (MX), respectively. The method detection and quantification limits (MDLs and MQLs) ranged between 0.5 (DPMI) and 1394 (exaltolide, EXA) ng/g dw and 2 and 4648 ng/g-dw, respectively. Both SMCs and UVFs were detected in all sludge samples analysed. Higher concentrations were found for octocrylene (OC: maximum value of 115,486 ng/g-dw) followed by galaxolide (HHCB: 81,771 ng/g-dw). Only the nitro musks ambrette, xylene, moskene and tibetene and macrocyclic musk ethylene brassylate (EB) were not detected in any sample.