Microemulsions as transdermal drug delivery vehicles

Transtympanic delivery of V2O5 nanowires with a tympanic-membrane penetrating peptide

Otitis media is a prevalent pediatric condition. Local delivery of antimicrobial agents to treat otitis media is hindered by the low permeability of the stratum corneum layer in the tympanic membrane. While nanozymes, often inorganic nanoparticles, have been developed to cure otitis media in an antibiotic-free manner in a chinchilla animal model, the tympanic membrane creates an impenetrable barrier that prevents the local and non-invasive delivery of nanozymes. Here, we use a newly developed vanadium pentoxide (V2O5) nanowire as an example, which catalyzes the metabolic products of an otitis media pathogen (Streptococcus pneumoniae) into antiseptics, to explore the transtympanic delivery strategies for antimicrobial nanozymes. V2O5 nanowires with smaller dimensions (<300 nm in length) were synthesized by optimizing the synthesis conditions. To enhance penetrations across intact tympanic membranes, the nanowire was mixed or surface-modified with a trans-tympanic peptide, TMT3. The peptide-modified nanowires were characterized for their physical properties, catalytic activities, and antimicrobial activities. The cytotoxicity profile and permeation across ex vivo tympanic membrane samples were analyzed for the mixed and surface-modified nanozyme formulations.

Hansen solubility parameters and quality-by-design oriented optimized cationic nanoemulsion for transdermal drug delivery of tolterodine tartrate

Tolterodine tartrate (TOT) is a selective anti-muscarinic drug to treat urinary urgency and overactive urinary bladder (OAB) occurring in children, renal disease and elderly patients. Oral delivery is associated with several adverse effects. We addressed HSPiP and QbD (quality by design)-oriented TOT loaded cationic nanoemulsions for transdermal delivery. Hansen solubility parameters (HSP) screened excipients based on theoretical solubility whereas, QbD optimized cationic nanoemulsions (CNE-TOT-6). Formulation characteristic parameters were desirable to execute targeted in vitro drug release and ex vivo permeation profiles. In vitro hemolysis was conducted at varied concentrations whereas, histopathological study supported the safety aspect of CNE-TOT6. A comparative bioavailability was carried out in a rat model. Capmul PG8 (CAP), tween 80, and PEG 400 (polyethylene glycol 400) were screened based on HSP and experimental solubility data. QbD suggested optimized content of CAP, tween 80, and PEG 400 to achieve the lowest value of size (184 nm), maximum % entrapment efficiency (87.2 %), high zeta potential (+32.6 mV), optimum viscosity (47.19 cP), and high extrudability (96 %) as compared to its gel. High gel consistency slowed down the drug release and permeation flux as compared to CNE-TOT6 suspension. Hemocompatible CNE-TOT6 increased pharmacokinetic parameters as compared to the control and gel without causing skin toxicity after application. Thus, HSPiP and QbD oriented cationic nanoemulsions are promising carriers to treat overactive urinary bladder.

Microemulsions strongly promoted the activity of α-bisabolol against different Leishmania species and its skin permeation

This study aimed to develop microemulsions (MEs) containing α-bisabolol for the topical treatment of cutaneous leishmaniasis (CL). Initially, pseudoternary phase diagrams were developed using α-bisabolol as the oil phase, Eumulgin® CO 40 as the surfactant, Polymol® HE as the co-surfactant, and distilled water as the aqueous phase. Two transparent liquid systems (TLS) containing 5% of α-bisabolol were selected and characterized (F5E25 and F5EP25). Next, skin permeation and retention assays were performed using Franz cells. The interaction of the formulation with the stratum corneum (SC) was evaluated using the FTIR technique. The cytotoxicity was evaluated in murine peritoneal macrophages. Finally, the antileishmanial activity of microemulsions was determined in promastigotes and amastigotes of L. amazonensis (strain MHOM/BR/77/LTB 0016). As a result, the selected formulations showed isotropy, nanometric size (below 25 nm), Newtonian behavior and pH ranging from 6.5 to 6.9. The MEs achieved a 2.5-fold increase in the flux and skin-permeated amount of α-bisabolol. ATR-FTIR results showed that microemulsions promoted fluidization and extraction of lipids and proteins of the stratum corneum, increasing the diffusion coefficient and partition coefficient of the drug in the skin. Additionally, F5E25 and F5EP25 showed higher activity against promastigotes (IC50 13.27 and 18.29, respectively) compared to unencapsulated α-bisabolol (IC50 53.8). Furthermore, F5E25 and F5EP25 also showed antileishmanial activity against intracellular amastigotes of L. amazonensis, with IC50 50 times lower than free α-bisabolol and high selectivity index (up to 15). Therefore, the systems obtained are favorable to topical administration, with significant antileishmanial activity against L. amazonensis promastigotes and amastigotes, being a promising system for future in vivo trials.

The ability of different diffusing enhancers to deliver chlorhexidine into dentinal tubules: An in vitro evaluation

Background/purpose

Root canal irrigants are difficult to diffuse deep into the dentinal tubules for root canal disinfection. The purpose of this study was to assess the ability of different diffusing enhancers to deliver chlorhexidine (CHX) into dentinal tubules.

Materials and methods

The diffusing property of five diffusing enhancers (acetone, DMSO, Triton X-100, JFC-E and azone) into dentinal tubules was firstly assessed using the Rhodamine B. The ability of the diffusing enhancers to deliver CHX into dentinal tubules was then evaluated both qualitatively and quantitatively. A deep dentinal tubule Enterococcus faecalis infection model was further established to test the bactericidal effect of CHX delivered by different diffusing enhancers. Finally, the in vitro cytotoxicity of these diffusing enhancers was tested using the CCK-8 method.

Results

Azone, Triton X-100 and JFC-E exhibited the largest maximum diffusing depths at all root canal parts (P < 0.05). Azone group also showed the highest percentage of diffusing depths for all root canal parts, followed by Triton X-100 (P < 0.05). The percentage of dead bacteria in dentinal tubules close to cementum layer was significantly higher in the CHX + azone group than in the other groups (P < 0.05), followed by CHX + Triton X-100 and CHX + JFC-E groups. The concentration of CHX diffusing onto the exterior surface of root was significantly higher in CHX + azone group than in the other groups (P < 0.05). All the diffusing enhancers showed relatively low cytotoxicity.

Conclusion

Azone showed the highest diffusing ability with low cytotoxicity and might be employed as a carrier agent for either intracanal irrigants or medications to achieve more thorough root canal disinfection.

Comparison of Machine Learning Approaches for Prediction of the Equivalent Alkane Carbon Number for Microemulsions Based on Molecular Properties

The chemical properties of oils are vital in the design of microemulsion systems. The hydrophilic-lipophilic difference equation used to predict microemulsions' phase behavior expresses the oils' physiochemical properties as the equivalent alkane carbon number (EACN). The experimental determination of EACN requires knowledge of the temperature dependence of the microemulsion system and the effects of different surfactant concentrations. Thus, the experimental determination is time-intensive and tedious, requiring days to months for proper separations. Furthermore, the experiments require high purity of chemicals because microemulsions are sensitive to impurities. Our work focuses on the quick and reliable predictions of the EACN with machine learning (ML) models. Due to the immaturity of ML chemical predictions, we compare three graph neural networks (GNNs) and a gradient-boosted tree algorithm, known as XGBoost. The GNNs use the molecular structures represented as simplified molecular-input line-entry system (SMILES) codes for the initial input, which allows us to assess whether geometry optimization is necessary for reliable results. The XGBoost model also begins with the SMILES representations of the molecules but uses molecular descriptors instead of geometry optimizations. The best model tested (crystal graph convolutional neural network with Merck molecular force field-94) has an error of 1.15 EACN units of the true EACN for unknown data with the errors skewed toward zero and an R2 score of 0.9.

Sabry S, El-Nahas HM, Ayoub MM. Maximizing the Use of Ivermectin Transethosomal Cream in the Treatment of Scabies

In an effort to tackle the skin reactions frequently observed with topical application of ivermectin (IVM), a study was conducted to develop and optimize transethosomes (TESMs) loaded with IVM for scabies treatment. A three-factor, two-level (23) full factorial design was employed. Soyabean phosphatidylcholine concentration (A), ethanol concentration (B) and Span 60 amount (C) were studied as independent factors, while entrapment efficiency (EE), particle size (PS), polydispersity index (PDI), zeta potential (ZP) and drug release after 6 h (Q6h) were characterized. The skin sensitivity of the optimized formulation was evaluated by skin irritation test and histopathological examination. The EE% ranged from 88.55 ± 0.576% to 94.13 ± 0.305%, PS was from 318.033 ± 45.61 nm to 561.400 ± 45.17 nm, PDI was from 0.328 ± 0.139 to 0.671 ± 0.103, ZP was from -54.13 ± 1.09 mV to -60.50 ± 2.34 mV and Q6h was from 66.20 ± 0.30% to 93.46 ± 0.86%. The IVM-loaded transethosomal cream showed lower skin irritation and a more intact epidermal layer with intact keratinocyte, compared to the marketed cream which showed severe destruction of the keratin layer. Therefore, patient compliance can be improved by encapsulating IVM within TESMs to minimize its skin reactions.

Oleogels: Versatile Novel Semi-Solid System for Pharmaceuticals

Oleogels is a novel semi-solid system, focusing on its composition, formulation, characterization, and diverse pharmaceutical applications. Due to their stability, smoothness, and controlled release qualities, oleogels are frequently utilized in food, cosmetics, and medicinal products. Oleogels are meticulously formulated by combining oleogelators like waxes, fatty acids, ethyl cellulose, and phytosterols with edible oils, leading to a nuanced understanding of their impact on rheological characteristics. They can be characterized by methods like visual inspection, texture analysis, rheological measurements, gelation tests, and microscopy. The applications of oleogels are explored in diverse fields such as nutraceuticals, cosmetics, food, lubricants, and pharmaceutics. Oleogels have applications in topical, transdermal, and ocular drug delivery, showcasing their potential for revolutionizing drug administration. This review aims to enhance the understanding of oleogels, contributing to the evolving landscape of pharmaceutical formulations. Oleogels emerge as a versatile and promising solution, offering substantial potential for innovation in drug delivery and formulation practices.

Development and Characterization of a Microemulsion Containing a Cannabidiol Oil and a Hydrophilic Extract from Sambucus ebulus for Topical Administration

Cannabidiol (CBD) is a safe and non-psychotropic phytocannabinoid with a wide range of potential therapeutic anti-inflamatory and antioxidant activities. Due to its lipophilicity, it is normally available dissolved in oily phases. The main aim of this work was to develop and characterize a new formulation of a microemulsion with potential anti-inflammatory and antioxidant activity for the topical treatment of inflammatory skin disorders. The microemulsion system was composed of a 20% CBD oil, which served as the hydrophobic phase; Labrasol/Plurol Oleique (1:1), which served as surfactant and cosurfactant (S/CoS), respectively; and an aqueous vegetal extract obtained from Sambucus ebulus L. (S. ebulus) ripe fruits, which has potential anti-oxidant and anti-inflammatory activity and which served as the aqueous phase. A pseudo-ternary phase diagram was generated, leading to the selection of an optimal proportion of 62% (S/CoS), 27% CBD oil and 11% water and, after its reproducibility was tested, the aqueous phases were replaced by the vegetal hydrophilic extract. The defined systems were characterized in terms of conductivity, droplet size (by laser scattering), compatibility of components (by differential scanning calorimetry) and rheological properties (using a rotational rheometer). The designed microemulsion showed good stability and slight pseudo-plastic behavior. The release properties of CBD from the oil phase and caffeic acid from the aqueous phase of the microemulsion were studied via in vitro diffusion experiments using flow-through diffusion cells and were compared to those of a CBD oil and a microemulsion containing only CBD as an active substance. It was found that the inclusion of the original oil in microemulsions did not result in a significant modification of the release of CBD, suggesting the possibility of including hydrophilic active compounds in the formulation and establishing an interesting strategy for the development of future formulations.

Strategies to Improve the Transdermal Delivery of Poorly Water-Soluble Non-Steroidal Anti-Inflammatory Drugs

The transdermal delivery of non-steroidal anti-inflammatory drugs (NSAIDs) has the potential to overcome some of the major disadvantages relating to oral NSAID usage, such as gastrointestinal adverse events and compliance. However, the poor solubility of many of the newer NSAIDs creates challenges in incorporating the drugs into formulations suitable for application to skin and may limit transdermal permeation, particularly if the goal is therapeutic systemic drug concentrations. This review is an overview of the various strategies used to increase the solubility of poorly soluble NSAIDs and enhance their permeation through skin, such as the modification of the vehicle, the modification of or bypassing the barrier function of the skin, and using advanced nano-sized formulations. Furthermore, the simple yet highly versatile microemulsion system has been found to be a cost-effective and highly successful technology to deliver poorly water-soluble NSAIDs.

Effect of mango butter on the physicochemical properties of beeswax-Moringa seed oil-based oleogels for topical application

OBJECTIVE

The purpose of this research was to determine any connections between the characteristics of oleogels made of beeswax and the impact of mango butter.

METHODS

Oleogel was prepared through inverted tube methods, and optimized through oil binding capacity. Other evaluations like bright field and polarized microscopy, Fourier-transform infrared (FTIR) spectroscopy, crystallization kinetics, mechanical study, and X-ray diffractometry (XRD). The drug release kinetic studies and in vitro antibacterial studies were performed.

RESULTS

FTIR study reveals that the gelation process does not significantly alter the chemical composition of the individual components. Prepared gel exhibiting fluid-like behavior or composed of brittle networks is particularly vulnerable to disruptions in their network design. The incorporation of mango butter increases the drug permeation. In-vitro microbial efficacy study was found to be excellent.

CONCLUSION

The studies revealed that mango butter can be used to modify the physico-chemical properties of the oleogels.

Revolutionizing Knee Osteoarthritis Treatment: Innovative Self-Nano-Emulsifying Polyethylene Glycol Organogel of Curcumin for Effective Topical Delivery

In the current study, self-nano-emulsifying (SNE) physically cross-linked polyethylene glycol (PEG) organogel (SNE-POG) as an innovative hybrid system was fabricated for topical delivery of water-insoluble and unstable bioactive compound curcumin (CUR). Response surface methodology (RSM) based on Optimal Design was utilized to evaluate the formulation factors. Solid fiber mechanism with homogenization was used to prepare formulations. Pharmaceutical evaluation including rheological and texture analysis, their mathematical correlations besides physical and chemical stability experiments, DSC study, in vitro release, skin permeation behavior, and clinical evaluation were carried out to characterize and optimize the SNE-OGs. PEG 4000 as the main organogelator, Poloxamer 188 (Plx188) and Ethyl Cellulose (EC) as co-gelator/nanoemulsifier agents, and PEG 400 and glycerin as solvent/co-emulsifier agents could generate SNE-POGs in PS range of 356 to 1410 nm that indicated organic base percentage and PEG 4000 were the most detrimental variables. The optimized OG maintained CUR stable in room and accelerated temperatures and could release CUR sustainably up to 72 h achieving high flux of CUR through guinea pig skin. A double-blind clinical trial confirmed that pain scores, stiffness, and difficulty with physical function were remarkably diminished at the end of 8 weeks compared to the placebo (71.68% vs. 7.03%, 62.40% vs. 21.44%, and 45.54% vs. 8.66%, respectively) indicating very high efficiency of system for treating knee osteoarthritis. SNE-POGs show great potential as a new topical drug delivery system for water-insoluble and unstable drugs like CUR that could offer a safe and effective alternative to conventional topical drug delivery system.

Novel Microemulsion Containing Benzocaine and Fusidic Acid Simultaneously: Formulation, Characterization, and In Vitro Evaluation for Wound Healing

Modern drug carrier technologies, such as microemulsions with small droplet sizes and high surface areas, improve the ability of low water solubility active ingredients to permeate and localize. The goal of this study was to create microemulsion formulations for wound healing that contained both fusidic acid (FA), an antibacterial agent, and benzocaine (BNZ), a local anesthetic. Studies on characterization were carried out, including viscosity, droplet size, and zeta potential. The drug-loaded microemulsion had a stable structure with -3.014 ± 1.265 mV of zeta potential and 19.388 ± 0.480 nm of droplet size. In both in vitro release and ex vivo permeability studies, the microemulsion was compared with Fucidin cream and oily BNZ solution. According to the drug release studies, BNZ release from the microemulsion and the BNZ solution showed a similar profile (p > 0.05), while FA release from the microemulsion had a higher drug release compared to Fucidin cream (p < 0.001). The microemulsion presented lower drug permeation (p > 0.05) for both active ingredients, on the other hand, provided higher drug accumulation compared to the control preparations. Moreover, according to the results of in vitro wound healing activity, the microemulsion indicated a dose-dependent wound healing potential with the highest wound healing activity at the highest concentrations. To the best of our knowledge, this developed BNZ- and FA-loaded microemulsion would be a promising candidate to create new opportunities for wound healing thanks to present the active ingredients, which have low water solubility, in a single formulation and achieved higher accumulation than control preparations.

Enhanced in vitro and ex vivo transdermal permeation of microemulsion gel of tapentadol hydrochloride

Aim of the current study is to develop a microemulsion gel for transdermal delivery of tapentadol hydrochloride. Microemulsion was developed using phase diagram and subjected to assay, globule size, PDI, zeta potential, TEM and in vitro drug release studies. The optimized microemulsion was converted into gel using carbopol 934 NF and evaluated for viscosity, spreadability, in vitro, ex vivo, FTIR, DSC, stability and skin irritation studies. The mean globule size, PDI, zeta potential and in vitro drug release of microemulsion were found 247.3 nm, 0.298, -17.6 mV and 98.42% respectively. In vitro and ex vivo drug release of gel was found 92.2% and 88.6% in 24 h. Viscosity and spreadability results indicated ease of application and no incompatibility was observed from FTIR studies. The skin irritation studies showed absence of erythema. Key findings from the current research concluded that microemulsion gel was suitable for effective transdermal delivery.

Pharmacodynamic Studies of Pravastatin Sodium Nanoemulsion Loaded Transdermal Patch for Treatment of Hyperlipidemia

Pravastatin sodium (PVS) is a hypolipidemic drug with poor oral bioavailability due to the first-pass effect. Therefore, this study aims to formulate and evaluate transdermal patches containing PVS-loaded nanoemulsions (PVS-NEs) to increase PVS's hypolipidemic and hepatoprotective activities. PVS-NEs were prepared using the aqueous titration method, where oleic acid was chosen as an oil phase, and span 80 and tween 80 were used as surfactant and cosurfactant respectively. Droplet size (DS), polydispersity index (PDI), zeta potential (ZP), clarity, and thermodynamic stability of NEs were all characterized. Also, PVS-NEs (NE2) with 50% oil phase, 40% SC mix 2:1, and 10% water were selected as an optimum formula based on the results of DS (251 ± 16), PDI (0.4 ± 0.16), and ZP (-70 ± 10.4) to be incorporated into a transdermal patch, and PVS-NE2 loaded transdermal patches (PVS-NE2-TDPs) were prepared by solvent evaporation method. F1 patch with HPMC E15 and PVP K30 in a ratio of 3:1 represented satisfactory patch properties with good drug-excipients compatibility. Thus, it was selected as an optimum patch formula. The optimized F1 patch was characterized for thickness, moisture content, weight variation, and drug-excipients incompatibility. Therefore, it was subjected to ex vivo skin permeation and finally pharmacodynamic studies. Ex vivo permeation studies of F1 revealed that the cumulative amount of PVS permeated across rat skin was 271.66 ± 19 µg/cm2 in 72 h, and the pharmacodynamic studies demonstrated that the F1 patch was more effective in treating hyperlipidemia than PVS-TDP (control patch) based on both blood analysis and histopathological examination. .

3D human foreskin model for testing topical formulations of sildenafil citrate

Sildenafil citrate is an approved drug used for the treatment of erectile dysfunction and premature ejaculation. Despite a widespread application, sildenafil citrate shows numerous adverse cardiovascular effects in high-risk patients. Local transdermal drug delivery of this drug is therefore being explored as an interesting and noninvasive alternative administration method that avoids adverse effects arised from peak plasma drug concentrations. Although human and animal skin represents the most reliable models to perform penetration studies, they involve a series of ethical issues and restrictions. For these reasons new in vitro approaches based on artificially reconstructed human skin or "human skin equivalents" are being developed as possible alternatives for transdermal testing. There is little information, however, on the efficiency of such new in vitro methods on cutaneous penetration of active ingredients. The objective of the current study was to investigate the sildenafil citrate loaded in three commercial transdermal vehicles using 3D full-thickness skin equivalent and compare the results with the permeability experiments using porcine skin. Our results demonstrated that, while the formulation plays an imperative role in an appropriate dermal uptake of sildenafil citrate, the D coefficient results obtained by using the 3D skin equivalent are comparable to those obtained by using the porcine skin when a simple drug suspension is applied (1.17 × 10-10 ± 0.92 × 10-10 cm2/s vs 3.5 × 102 ± 3.3 × 102 cm2/s), suggesting that in such case, this 3D skin model can be a valid alternative for ex-vivo skin absorption experiments.

Nanotechnology-based Drug Delivery of Topical Antifungal Agents

Among the various prominent fungal infections, superficial ones are widespread. A large number of antifungal agents and their formulations for topical use are commercially available. They have some pharmacokinetic limitations which cannot be retracted by conventional delivery systems. While nanoformulations composed of lipidic and polymeric nanoparticles have the potential to overcome the limitations of conventional systems. The broad spectrum category of antifungals i.e. azoles (ketoconazole, voriconazole, econazole, miconazole, etc.) nanoparticles have been designed, prepared and their pharmacokinetic and pharmacodynamic profile was established. This review briefly elaborates on the types of nano-based topical drug delivery systems and portrays their advantages for researchers in the related field to benefit the available antifungal therapeutics.

Double Emulsion-Mediated Delivery of Polyphenol Mixture Alleviates Atopic Dermatitis

Although the polyphenols have been studied to alleviate inflammation, there are still challenges to delivering the polyphenols with stabilized formulation due to their low water solubility and susceptibility to oxidation. Herein, the transdermal delivery system of polyphenol mixture (PM), including quercetin (Q), phloretin (P), and ellagic acid (E), is developed using double emulsion for applying to atopic dermatitis (AD). Through the in vitro anti-degranulation assay, the optimal molar ratio of each polyphenol (Q:P:E = 5:1:1) is obtained, and the PM shows at most a 43.6% reduction of degranulation of immune cells, which is the primary factor of AD. Moreover, the water-in-oil-in-water double emulsion (W/O/W) enhances the PM's stability and has a higher anti-degranulation effect than the oil-in-water emulsion (O/W). In the in vivo 1-chloro-2,4-dinitrobenzene (DNCB)-induced mice AD model, PM reduces more AD symptoms than every single polyphenol. The PM-encapsulated W/O/W (PM_W/O/W) shows the most effectiveness in AD by decreasing dermatitis score, i.e., skin/ear thickness, mast cells, and serum IgE level. Finally, this suggests that the findings on the optimal ratio of PM and double emulsion-based delivery would be beneficial in treating AD and can be applied to other allergic diseases.

Acacetin-loaded microemulsion for transdermal delivery: preparation, optimization and evaluation

CONTEXT

Acacetin is reported as a potential drug candidate for the treatment of atrial fibrillation. However, clinical applications are limited by poor water solubility, limited ethanol solubility, and extremely low oral bioavailability.

OBJECTIVE

The present study prepared and evaluated acacetin-loaded microemulsion (ME) to achieve efficient pharmacokinetics together with no or minimal invasiveness for transdermal delivery.

MATERIALS AND METHODS

The formulation of ME was determined by the water titration method based on solubility results. The optimized formulation was achieved by the simplex lattice experiment design. The optimized ME formulations FA, FB and FC (FA with 10% and 50% DMSO as enhancers, respectively) were evaluated by ex vivo permeation with Franz diffusion cell and excised mice skin. In vivo pharmacokinetic studies were also performed at 8 mg/kg in rats within 6 h by transdermal administration.

RESULTS

The optimal ME (FA) was comprised of 12.2% caprylic acid decanoate monoditriglyceride (MCF-NF), 39.8% Smix (RH40: Trans = 2:1 w/w) and 48% water, respectively. Acacetin-loaded FA with particle size 36.0 ± 3.6 nm and drug solubility 803.7 ± 32.1 mg/g was prepared. FB had significantly higher cumulative amounts and higher AUC_0-∞ (196.6 ± 11.0 min × μg/mL, p < 0.05) than that FA alone (121.4 ± 33.1 min × μg/mL).

DISCUSSION AND CONCLUSIONS

The formulation of ME combined with the penetration enhancer can effectively improve the solubility and percutaneous absorption efficiency of acacetin, providing a new option for the non-invasive delivery of acacetin.

A Study of Microemulsion Systems for Transdermal Delivery of Risperidone Using Penetration Enhancers

The aim of this study was to develop and characterize microemulsion formulations using penetration enhancers as potential transdermal delivery systems for risperidone. Initially, a simple formulation of risperidone in Propylene Glycol (PG) was prepared as a control formulation, together with formulations incorporating various penetration enhancers, alone and/or in combination, and also microemulsion formulations with various chemical penetration enhancers, were prepared and all were evaluated for risperidone transdermal delivery. An ex-vivo permeation study was carried out using human cadaver skin and vertical glass Franz diffusion cells to compare all the microemulsion formulations. The microemulsion prepared from oleic acid as the oil (15%), Tween 80 (15%) as the surfactant and isopropyl alcohol (20%) as the co-surfactant, and water (50%) showed higher permeation with a flux value of 32.50±3.60 ug/hr/sq.cm, a globule size of 2.96±0.01 nm, a polydispersity index of 0.33±0.02 and pH of 4.95. This novel in vitro research disclosed that an optimized microemulsion formulated using penetration enhancers was able to increase permeation of risperidone by 14-fold compared to the control formulation. The data suggested that microemulsions may be useful in the delivery of risperidone via the transdermal route.

Development of the Forskolin Microemulsion Formula and its Irritation Test on Rabbits

Objectives

This study aimed to develop a microemulsion formula that can increase the solubility and stability of forskolin and its safety for topical use.

Materials and Methods

The materials used for the development of the microemulsion formula were triglyceride oil, non-ionic surfactants, and polyethylene glycol (PEG) for cosurfactants, which were selected on the basis of the results of the forskolin solubility test using high performance liquid chromatography (HPLC). The microemulsion was formulated by the phase titration method. Formula stability was determined by storage for 90 days in a refrigerator at room temperature, and an accelerated stability test was performed by determining globule size, forskolin concentration, and pH. The safety of using microemulsions was determined by skin irritation tests on albino rabbits.

Results

The optimum microemulsion formula consisted of Maisine® CC, polyoxyethylene sorbitan 20 (POE 20), and PEG 400 with a ratio of 4:25:5 w/v, which increased the solubility of forskolin the most, namely 2.19 mg mL-1. Based on globule size (<50 nm), forskolin concentration (2 mg.mL-1), and pH (6.0-6.35), the formula was stable in refrigerator storage and room temperature but unstable in the accelerated stability test (40 °C) starting on day 21. This optimum formula exhibits a primary irritation index (PII) of 0.11, which is categorized as feeble irritation and can be ignored.

Conclusion

The microemulsion prepared by the phase titration method containing Maisine® CC, POE 20, and PEG 400 (4:25:5, w/v) as a base and 0.2% forskolin was stable in refrigerator storage and at room temperature. This microemulsion is mild or negligible irritant with a PII: 0.11.

Lipid nanoparticles containing coenzyme Q10 for topical applications: An overview of their characterization

The coenzyme Q10 is a compound widely used in pharmaceutical and cosmetic formulations because it is a potent eliminator of free radicals, giving it antioxidant and anti-aging properties. It is naturally synthesized by the human body, but its production wanes with age, leading to the formation of wrinkles. The efficacy of topical application of the coenzyme to counteract this process is subject to several difficulties, due to its instability in the presence of light, low solubility in water and high lipophilicity. Because of these drawbacks, many studies have been conducted of release systems. Lipid nanoparticles stand out in this sense due to the advantages of skin compatibility, protection of the active ingredient against degradation in the external medium, capacity to increase penetration of that ingredient in the skin, and its controlled and prolonged release. In this context, this article presents a review of the main studies of the coenzyme Q10 encapsulated in lipid nanoparticles for topical use, focusing on the analytic methods used to characterize the systems regarding morphology, zeta potential, release profile, Q10 content, encapsulation efficiency, crystalline organization and structure of the lipid matrix, rheology, antioxidant activity, skin penetration and efficacy, among other aspects. We also describe the main results of the different studies and discuss the critical aspects - the simplest, most reproducible, best, and most relevant - that characterize lipid nanoparticles with encapsulated Q10 for topical use.

Application of nanotechnology in bladder cancer diagnosis and therapeutic drug delivery

Bladder cancer (BC) is one of the most common malignant tumors in the urinary system, and its high recurrence rate is a great economic burden to patients. Traditional diagnosis and treatment methods have the disadvantages of insufficient targeting, obvious side effects and low sensitivity, which seriously limit the accurate diagnosis and efficient treatment of BC. Due to their small size, easy surface modification, optical properties such as plasmon resonance, and surface enhanced Raman scattering, good electrical conductivity and photothermal conversion properties, nanomaterials have great potential application value in the realization of specific diagnosis and targeted therapy of BC. At present, the application of nanomaterials in the diagnosis and treatment of BC is attracting great attention and achieving rich research results. Therefore, this paper summarizes the recent research on nanomaterials in the diagnosis and treatment of BC, clarifies the existing advantages and disadvantages, and provides theoretical guidance for promoting the accurate diagnosis and efficient treatment of BC.

Nano- and Microemulsions in Biomedicine: From Theory to Practice

Nano- and microemulsions are colloidal systems that are widely used in various fields of biomedicine, including wound and burn healing, cosmetology, the development of antibacterial and antiviral drugs, oncology, etc. The stability of these systems is governed by the balance of molecular interactions between nanodomains. Microemulsions as a colloidal form play a special important role in stability. The microemulsion is the thermodynamically stable phase from oil, water, surfactant and co-surfactant which forms the surface of drops with very small surface energy. The last phenomena determines the shortage time of all fluid dispersions including nanoemulsions and emulgels. This review examines the theory and main methods of obtaining nano- and microemulsions, particularly focusing on the structure of microemulsions and methods for emulsion analysis. Additionally, we have analyzed the main preclinical and clinical studies in the field of wound healing and the use of emulsions in cancer therapy, emphasizing the prospects for further developments in this area.

Topical Microemulsions: Skin Irritation Potential and Anti-Inflammatory Effects of Herbal Substances

Microemulsions (MEs) have gained prominence as effective drug delivery systems owing to their optical transparency, low viscosity, and thermodynamic stability. MEs, when stabilized with surfactants and/or co-surfactants, exhibit enhanced drug solubilization, prolonged shelf life, and simple preparation methods. This review examines the various types of MEs, explores different preparation techniques, and investigates characterization approaches. Plant extracts and bioactive compounds are well established for their utilization as active ingredients in the pharmaceutical and cosmetic industries. Being derived from natural sources, they serve as preferable alternatives to synthetic chemicals. Furthermore, they have demonstrated a wide range of therapeutic effects, including anti-inflammatory, antimicrobial, and antioxidant activities. However, the topical application of plant extracts and bioactive compounds has certain limitations, such as low skin absorption and stability. To overcome these challenges, the utilization of MEs enables enhanced skin absorption, thereby making them a valuable mode of administration. However, considering the significant surfactant content in MEs, this review evaluates the potential skin irritation caused by MEs containing herbal substances. Additionally, the review explores the topical application of MEs specifically for herbal substances, with an emphasis on their anti-inflammatory properties.

Solidified saturated fats coating subunit vaccines greatly extended vaccine booster release and contributed to a Th1/Th2 mixed immune response in mice

Delayed release of vaccine coupled with a soluble vaccine acts as a primer and a booster with only a single administration, which would be very beneficial to livestock producers. We developed a subdermal pellet consisting of solid-phase pure stearic acid (SA) or palmitic acid (PA) that was used to encapsulate a small volume liquid vaccine consisting of fluorescently labeled *Ovalbumin (Cy5-*OVA) formulated with Emulsigen-D +/- Poly I:C (EMP) adjuvants. Mice were also immunized via the subcutaneous route with Cy5-*OVA-EMP (soluble liquid). The vaccine leached out of the pellet with very little dissolution of the fat itself resulting in the sustained subdermal delivery of antigens and adjuvants. Cy5-*OVA was still visible 60 days post administration in mice immunized with stearic acid-coated or palmitic acid-coated pellets. In these mice, persistently high IgG1 and IgG2a antibody titres were detected as well as significant IFNγ production at least 60 days post-injection. These responses were significantly higher than those observed after a single subcutaneous injection of the vaccine. A repeat trial with the pellets alone +/- the soluble vaccine showed comparable immune responses after surgical implantation of the pellet, suggesting that pellet alone may be sufficient. The PA-coated vaccines led to dermal inflammation in the mice that would limit usefulness of this vehicle, but this was largely absent when SA was used to coat the pellets. These data suggest that the SA-coated adjuvanted vaccine prolonged the release of the vaccine and triggered a comparable immune response to the mice that received the two liquid injections, and a single pellet vaccine should be tested as a novel immunization method for livestock.

Exploring the Versatility of Microemulsions in Cutaneous Drug Delivery: Opportunities and Challenges

Microemulsions are novel drug delivery systems that have garnered significant attention in the pharmaceutical research field. These systems possess several desirable characteristics, such as transparency and thermodynamic stability, which make them suitable for delivering both hydrophilic and hydrophobic drugs. In this comprehensive review, we aim to explore different aspects related to the formulation, characterization, and applications of microemulsions, with a particular emphasis on their potential for cutaneous drug delivery. Microemulsions have shown great promise in overcoming bioavailability concerns and enabling sustained drug delivery. Thus, it is crucial to have a thorough understanding of their formulation and characterization in order to optimize their effectiveness and safety. This review will delve into the different types of microemulsions, their composition, and the factors that affect their stability. Furthermore, the potential of microemulsions as drug delivery systems for skin applications will be discussed. Overall, this review will provide valuable insights into the advantages of microemulsions as drug delivery systems and their potential for improving cutaneous drug delivery.

Preparation and In Vitro Characterization of Alkyl Polyglucoside-Based Microemulsion for Topical Administration of Curcumin

The skin is a complex and selective system from the perspective of permeability to substances from the external environment. Microemulsion systems have demonstrated a high performance in encapsulating, protecting and transporting active substances through the skin. Due to the low viscosity of microemulsion systems and the importance of a texture that is easy to apply in the cosmetic and pharmaceutical fields, gel microemulsions are increasingly gaining more interest. The aim of this study was to develop new microemulsion systems for topical use; to identify a suitable water-soluble polymer in order to obtain gel microemulsions; and to study the efficacy of the developed microemulsion and gel microemulsion systems in the delivery of a model active ingredient, namely curcumin, into the skin. A pseudo-ternary phase diagram was developed using AKYPO^® SOFT 100 BVC, PLANTACARE^® 2000 UP Solution and ethanol as a surfactant mix; caprylic/capric triglycerides, obtained from coconut oil, as the oily phase; and distilled water. To obtain gel microemulsions, sodium hyaluronate salt was used. All these ingredients are safe for the skin and are biodegradable. The selected microemulsions and gel microemulsions were physicochemically characterized by means of dynamic light scattering, electrical conductivity, polarized microscopy and rheometric measurements. To evaluate the efficiency of the selected microemulsion and gel microemulsion to deliver the encapsulated curcumin, an in vitro permeation study was performed.

Potential of Lipid-Based Nanocarriers against Two Major Barriers to Drug Delivery-Skin and Blood-Brain Barrier

Over the past few years, pharmaceutical and biomedical areas have made the most astounding accomplishments in the field of medicine, diagnostics and drug delivery. Nanotechnology-based tools have played a major role in this. The implementation of this multifaceted nanotechnology concept encourages the advancement of innovative strategies and materials for improving patient compliance. The plausible usage of nanotechnology in drug delivery prompts an extension of lipid-based nanocarriers with a special reference to barriers such as the skin and blood-brain barrier (BBB) that have been discussed in the given manuscript. The limited permeability of these two intriguing biological barriers restricts the penetration of active moieties through the skin and brain, resulting in futile outcomes in several related ailments. Lipid-based nanocarriers provide a possible solution to this problem by facilitating the penetration of drugs across these obstacles, which leads to improvements in their effectiveness. A special emphasis in this review is placed on the composition, mechanism of penetration and recent applications of these carriers. It also includes recent research and the latest findings in the form of patents and clinical trials in this field. The presented data demonstrate the capability of these carriers as potential drug delivery systems across the skin (referred to as topical, dermal and transdermal delivery) as well as to the brain, which can be exploited further for the development of safe and efficacious products.

Delivery of Active Peptides by Self-Healing, Biocompatible and Supramolecular Hydrogels

Supramolecular and biocompatible hydrogels with a tunable pH ranging from 5.5 to 7.6 lead to a wide variety of formulations useful for many different topical applications compatible with the skin pH. An in vitro viability/cytotoxicity test of the gel components demonstrated that they are non-toxic, as the cells continue to proliferate after 48 h. An analysis of the mechanical properties demonstrates that the hydrogels have moderate strength and an excellent linear viscoelastic range with the absence of a proper breaking point, confirmed with thixotropy experiments. Two cosmetic active peptides (Trifluoroacetyl tripeptide-2 and Palmitoyl tripeptide-5) were successfully added to the hydrogels and their transdermal permeation was analysed with Franz diffusion cells. The liquid chromatography-mass spectrometry (HPLC-MS) analyses of the withdrawn samples from the receiving solutions showed that Trifluoroacetyl tripeptide-2 permeated in a considerable amount while almost no transdermal permeation of Palmitoyl tripeptide-5 was observed.

Topical Delivery of Diacetyl Boldine in a Microemulsion Formulation for Chemoprotection against Melanoma

This study aimed to develop a microemulsion formulation for topical delivery of Diacetyl Boldine (DAB) and to evaluate its cytotoxicity against melanoma cell line (B16BL6) in vitro. Using a pseudo-ternary phase diagram, the optimal microemulsion formulation region was identified, and its particle size, viscosity, pH, and in vitro release characteristics were determined. Permeation studies were performed on excised human skin using Franz diffusion cell assembly. The cytotoxicity of the formulations on B16BL6 melanoma cell lines was evaluated by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide) assay. Two formulation compositions were selected based on the higher microemulsion area of the pseudo-ternary phase diagrams. The formulations showed a mean globule size of around 50 nm and a polydispersity index of <0.2. The ex vivo skin permeation study demonstrated that the microemulsion formulation exhibited significantly higher skin retention levels than the DAB solution in MCT oil (Control, DAB-MCT). Furthermore, the formulations showed substantially higher cytotoxicity toward B16BL6 cell lines than the control formulation (p < 0.001). The half-maximal inhibitory concentrations (IC50) of F1, F2, and DAB-MCT formulations against B16BL6 cells were calculated to be 1 µg/mL, 10 µg/mL, and 50 µg/mL, respectively. By comparison, the IC50 of F1 was 50-fold lower than that of the DAB-MCT formulation. The results of the present study suggest that microemulsion could be a promising formulation for the topical administration of DAB.

Current advances in the application of nanomedicine in bladder cancer

Bladder cancer is the most common malignant tumor of the urinary system, however there are several shortcomings in current diagnostic and therapeutic measures. In terms of diagnosis, the diagnostic tools currently available are not sufficiently sensitive and specific, and imaging is poor, leading to misdiagnosis and missed diagnoses, which can delay treatment. In terms of treatment, current treatment options include surgery, chemotherapy, immunotherapy, gene therapy, and other emerging treatments, as well as combination therapies. However, the main reasons for poor efficacy and side effects during treatment are the lack of specificity and targeting, improper dose control of drugs and photosensitizers, damage to normal cells while attacking cancer cells, and difficulty in delivering siRNA to cancer cells. Nanomedicine is an emerging approach. Among the many nanotechnologies applied in the medical field, nanocarrier-assisted drug delivery systems have attracted extensive research interest due to their great translational value. Well-designed nanoparticles can deliver agents or drugs to specific cell types within target organs through active targeting or passive targeting (enhanced permeability and retention), which allows for imaging, diagnosis, as well as treatment of cancer. This paper reviews advances in the application of various nanocarriers and their advantages and drawbacks, with a focus on their use in the diagnosis and treatment of bladder cancer.

Self-Assembled Structure of α-Isostearyl Glyceryl Ether Affects Skin Permeability-a Lamellar with 70-nm Spaces and L3 Phase Enhanced the Transdermal Delivery of a Hydrophilic Model Drug

Self-assembled surfactant structures, such as liquid crystals, have the potential to enhance transdermal drug delivery. In the present study, the pseudo-ternary system of GET (composed of α-Isostearyl glyceryl ether (GEIS) and polysorbate 60)/1,3 butanediol (BG)/water) was shown to exhibit a complex phase diagram. Small- and wide-angle X-ray scattering (SWAXS) and freeze-fracture transmission electron microscopy (FF-TEM) revealed that GET6BG60 (6%GET/60%BG/34%Water) formed a lamellar phase with a repeated distance of approximately 72 nm. Such a long-repeated distance of the lamellar phase was unique in the surfactant system. Moreover, the various structures, such as multilamellar vesicles and branched-like layers, were observed, which suggested that they might be deformable. On the other hand, only core-shell particles were observed in GET6BG20, the core of which was an L₃ phase. GET6BG20 and GET6BG60 significantly enhanced the skin permeation of the hydrophilic model drug, antipyrine (ANP) (log K_o/w, - 1.51). However, their permeation profiles were distinct. Liquid chromatography-tandem mass spectrometry revealed that epidermal accumulation of GEIS was significantly higher with GET6BG60 than GET6BG20 after 1.5 h of permeation, which might be attributed to differences in their deformable properties. Furthermore, GEIS was reported to affect intercellular lipids. Accumulated GEIS in the epidermis may have interacted with intercellular lipids and enhanced the transdermal delivery of ANP. The difference in the permeation profiles of ANP may be attributed to the penetration process of GEIS in the epidermis. This study suggests that GET6BG20 and GET6BG60 are unique carriers to enhance the permeation of hydrophilic drugs, such as ANP.

Reversible stability of colloids switched by CO2 based on polyhexamethylene guanidine

The stability of a colloid, including emulsion and polymer latex, can be destroyed irreversibly by the addition of salt. Using the CO₂ stimulus, amines can be converted into organic ammonium salts reversibly, which can access the switching of colloids. Polyhexamethylene guanidine (PHMG), was chosen as a switchable amine. The conductivity of PHMG aqueous solution switched by adding and removing CO₂. Surface tension measurements verified that, under CO₂, the critical micelle concentration of sodium dodecyl benzene sulfonate (SDBS) decreased from 1.0 × 10^-3 to 5.0 × 10^-4 M with the addition of PHMG. The crude oil emulsion containing SDBS and PHMG was destroyed and restored reversibly by the treatment with CO₂ and N₂. The polystyrene latex also occurred an obvious stratification after sparging with CO₂ and returned a homogeneous phase upon bubbling N₂. This study is intended to pave the way for colloids which has reversible stability in response to CO₂ stimulation.

In vitro and in vivo evaluation of cinnamaldehyde Microemulsion-Mucus interaction

The current investigation explores the possible mechanism of the microemulsion drug delivery system to improve the oral bioavailability of cinnamaldehyde (CA), an important food spice, from the perspective of the microemulsion-mucus system. The cinnamaldehyde microemulsion (CA-ME) was prepared by the water titration method combined with the pseudo-ternary phase diagram. The dynamic analysis was applied to detect the drug release in vitro. An intestinal mucosal injury test was conducted to evaluate the safety of CA-ME and drug absorption across the intestinal tract of rats was investigated through an Ussing chamber system. The rheology of blank mucus and drug-loaded mucus was investigated using a rheometer. The bioavailability of CA-ME in rats was evaluated through pharmacokinetic characteristics. The ratio of optimal prescription was Tween 80: 1,2-propanediol: vitamin E oil: CA: water = 24.3:4.8:5:7.5:58.4. The droplets were uniform in size and evenly dispersed. Rheological studies showed that the microemulsion-mucus system all exhibit pseudoplastic fluid behavior, and CA-ME increased the viscosity of the mucus to a certain extent. Compared with CA solution, CA-ME promoted the absorption of CA in various intestinal segments, especially the ileum. Pharmacokinetic experiments showed that the relative bioavailability of CA-ME was enhanced 2.5-fold higher than that of CA solution. ME as a carrier for lipophobic substances, may increase the viscosity of the intestine mucus system to obtain longer residue time and better absorption. PRACTICAL APPLICATIONS: In this study, in vitro absorption Ussing model was combined with rheological and pharmacokinetic analysis to systematically analyze the intestinal mucus mechanism of microemulsion to improve the oral bioavailability of cinnamic aldehyde. It laid the foundation for exploring the absorption and transport of drugs in the intestinal mucus barrier.

Solid lipid nanoformulation of berberine attenuates Doxorubicin triggered in vitro inflammation in H9c2 rat cardiomyocytes

AIM

To evaluate berberine solid lipid nanoparticles' efficacy against doxorubicin-induced cardiotoxicity.

BACKGROUND

Berberine (Ber) is cardioprotective, but its oral bioavailability is low and its effect in chemotherapy-induced cardiotoxicity has not been studied.

OBJECTIVE

Solid lipid nanoparticles (SLNs) of berberine chloride were prepared, characterized and evaluated in vitro against Doxorubicin induced cardiomyocyte injury.

METHODOLOGY

Berberine loaded SLNs (Ber-SLNs) were synthesized using water-in-oil microemulsion technique with tripalmitin, Tween 80 and poloxamer 407. Ber-SLNs were evaluated for preventive effect against toxicity of Doxorubicin in H9c2 cells. The culture was pre-treated (24 h) with Ber (10 µM) and Ber-SLNs (1 and 10 µM) and exposed to 1 µM of Doxorubicin (Dox) was added for 3 h. The cell viability (LDH (Lactate dehydrogenase) assay and MTT (3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide)), levels of Creatine kinase-MB (CK-MB), Nitrite, MDA (Malondialdehyde), ROS (Reactive oxygen species) generation and apoptotic DNA (Deoxyribonucleic acid) content were assessed.

RESULTS

Ber-SLNs had a mean particle size of 13.12±1.188 nm, zeta potential of -1.05 ± 0.08 mV, poly-dispersity index (PDI) of 0.317 ± 0.05 and entrapment efficiency of 50 ± 4.8%. Cell viability was 81  0.17% for Ber-SLNs (10 µM) and 73.22  0.83% for Ber (10 µM) treated cells in MTT assay. Percentage cytotoxicity calculated from LDH release was 58.91  0.54% after Dox, 40.3  1.3% with Ber (10 µM) and 40.7  1.3% with Ber-SLNs (1 µM) (p<0.001). Inflammation and oxidative stress markers were lower with Ber and Ber-SLNs. Attenuation of ROS generation and apoptosis of cardiomyocytes were noted on fluorescence microscopy.

CONCLUSION

Ber loaded SLNs effectively prevented Doxorubicin-induced inflammation and oxidative stress in rat cardiomyocytes. The results demonstrate that microemulsion is a simple, cost-effective technique to prepare Ber-SLNs and may be considered as a drug delivery vehicle for berberine.

Microemulsions formed by PPG-5-CETETH-20 at low concentrations for transdermal delivery of nifedipine: Structural and in vitro study

Nifedipine is a potent anti-hypertensive, which is poorly orally bioavailable on account of first-pass metabolism, short half-life, and low water solubility. This study aimed to develop a microemulsified system with low surfactant concentration and to evaluate the influence of microemulsion (ME) phase behavior on skin permeation of nifedipine, as drug model. Thereafter, MEs were obtained using PPG-5-CETETH-20, oleic acid, and phosphate buffer at pH 5.0. The selected MEs were isotropic, with droplet diameters less than 10 nm, polydispersity index < 0.25, and pH between 5.0 and 5.2. MEs presented low viscosity and Newtonian behavior. SAXS results confirmed bicontinuous and oil-in-water (o/w) MEs formation. The presence of the drug promoted only very slight modifications in the ME structure. The MEs presented ability to deliver nifedipine via the transdermal route when in comparison with the control. Nevertheless, the skin permeated and retained amounts from the o/w and bicontinuous formulations did not differ significantly. The ATR-FTIR demonstrated that both formulations promoted fluidization and disorganization of lipids and increased the drug diffusion and partition coefficients in the skin. In conclusion, PPG-5-CETETH-20 MEs obtained proved to be effective skin permeation enhancers, acting by rising the coefficients of partition and diffusion of the nifedipine in the skin.

Lethal and sublethal effects of an emulsion based on Pogostemon cablin (Lamiaceae) essential oil on the coffee berry borer, Hypothenemus hampei

The global search for eco-friendly and human-safe pesticides has intensified, and research on essential oils (EOs) has expanded due to their remarkable insecticidal activities and apparent human-safe. Despite this, most of the literature focuses on short-term and simplified efforts to understand lethal effects, with only a few comprehensive studies addressing sublethal exposures. To fill this shortcoming, we explore the lethal and sublethal effects of Pogostemon cablin (Lamiaceae) EO and an EO-based emulsion (18%) using the coffee berry borer Hypothenemus hampei Ferrari (Coleoptera: Curculionidae: Scolytinae) as a model. First, we determine the toxicity of EO and EO-based emulsion using dose-mortality curves and lethal times. Second, we subjected adult females of H. hampei to sublethal doses to assess whether they affected their behavior, reproductive output, and histological features. Our findings reveal that patchoulol (43.05%), α-Guaiene (16.06%), and α-Bulnesene (13.69%) were the main components of the EO. Furthermore, the EO and its emulsion had similar toxicity, with dose-mortality curves and lethal times overlapping 95% confidence intervals. We also observed that sublethal exposure of females of H. hampei reduces reproduction and feeding, increases walking activity, and causes histopathological changes in the midgut. This study advances the knowledge of the lethal and sublethal effects of an eco-friendly substance on insects.Responsible Editor: Giovanni Benelli.

Microemulsions as Emerging Electrolytes: The Correlation of Structure to Electrochemical Response

We describe the structural studies of microemulsions (μEs) prepared from water, toluene, butanol, and polysorbate 20 (PS20) that we recently used as electrolytes. Small-angle neutron scattering was used to monitor the development of the bicontinuous system as a function of the water-to-surfactant mass ratio on a constant oil-to-surfactant dilution line, revealing how the domain size, correlation length, amphiphilicity factor, and bending moduli change with composition. Kratky and Porod analyses are also employed, providing further structural detail of the scattering domains. We demonstrate that controlling the water-to-surfactant ratio with a constant oil-to-surfactant dilution affects the bicontinuous phase, reveals a sizeable compositional region with structural similarities, and provides insight into the correlation of structure to physical properties. Voltammetric results are presented to examine how the evolution of the bicontinuous structure formed in a μE prepared from water, toluene, butanol, and PS20 contributes to the electrochemical response. These findings, therefore, provide essential information that will guide the formulation of μEs as electrolytes for energy storage.

Phospholipid-Based Microemulsions for Cutaneous Imiquimod Delivery

Imiquimod (IMQ) is a potent immune response modifier with antiviral and antitumor properties. IMQ’s low aqueous solubility and unsatisfactory cutaneous permeability limit its formulation into effective dosage forms. This work aimed to develop IMQ-loaded microemulsions (MEs) based on phospholipids and oleic acid to improve IMQ penetration into the epidermis. A pseudo-ternary phase diagram was constructed, and the microstructure of the formulations was examined by measuring the conductivity values. Selected MEs were characterized and studied for their ability to deliver IMQ into and through ex vivo human skin. ME1 with 1% IMQ (bicontinuous ME with Bingham rheology) delivered similar IMQ quantities to the human epidermis ex vivo as the commercial product while having a 5-fold lower IMQ dose. IMQ was not detected in the acceptor phase after the permeation experiment, suggesting a lower systemic absorption risk than the established product. Infrared spectroscopy of the stratum corneum revealed less ordered and less tightly packed lipids after ME1 application. The ME1-induced barrier disruption recovered within less than 5 h after the formulation removal, as detected by transepidermal water loss measurements. In conclusion, our findings demonstrate that phospholipid and oleic acid-based MEs could become a promising alternative for topical IMQ administration.

Microemulsions and Nanoemulsions in Skin Drug Delivery

Microemulsions and nanoemulsions are lipid-based pharmaceutical systems with a high potential to increase the permeation of drugs through the skin. Although being isotropic dispersions of two nonmiscible liquids (oil and water), significant differences are encountered between microemulsions and nanoemulsions. Microemulsions are thermodynamically stable o/w emulsions of mean droplet size approximately 100–400 nm, whereas nanoemulsions are thermodynamically unstable o/w emulsions of mean droplet size approximately 1 to 100 nm. Their inner oil phase allows the solubilization of lipophilic drugs, achieving high encapsulation rates, which are instrumental for drug delivery. In this review, the importance of these systems, the key differences regarding their composition and production processes are discussed. While most of the micro/nanoemulsions on the market are held by the cosmetic industry to enhance the activity of drugs used in skincare products, the development of novel pharmaceutical formulations designed for the topical, dermal and transdermal administration of therapeutic drugs is being considered. The delivery of poorly water-soluble molecules through the skin has shown some advantages over the oral route, since drugs escape from first-pass metabolism; particularly for the treatment of cutaneous diseases, topical delivery should be the preferential route in order to reduce the number of drugs used and potential side-effects, while directing the drugs to the site of action. Thus, nanoemulsions and microemulsions represent versatile options for the delivery of drugs through lipophilic barriers, and many synthetic and natural compounds have been formulated using these delivery systems, aiming to improve stability, delivery and bioactivity. Detailed information is provided concerning the most relevant recent scientific publications reporting the potential of these delivery systems to increase the skin permeability of drugs with anti-inflammatory, sun-protection, anticarcinogenic and/or wound-healing activities. The main marketed skincare products using emulsion-based systems are also presented and discussed.

Investigating the morphological transitions in an associative surfactant ternary system

Associative surfactants systems involving polar oils have recently been shown to stabilize immiscible liquids by forming nanostructures at the liquid interface and have been used to print soft materials. Although these associating surfactant systems show great promise for creating nanostructured soft materials, a fundamental understanding of the self-assembly process is still unknown. In this study, a ternary phase diagram for a system of cationic surfactant cetylpyridinium chloride monohydrate (CPCl), a polar oil (oleic acid), and water is established using experiment and simulation, to study the equilibrium phase behavior. A combination of visual inspection, small-angle X-ray scattering (SAXS), and rheological measurements was employed to establish the phase behavior and properties of the self-assembled materials. Dissipative particle dynamics (DPD) is used to simulate the formation of the morphologies in this system and support the experimental results. The ternary phase diagram obtained from the simulations agrees with the experimental results, indicating the robustness of the computational simulation as a supplement to the mesoscale experimental systems. We observe that morphological transitions (e.g., micelle-to-bilayer and vesicle-to-lamellar) are in agreement between experiments and simulations across the ternary diagram. DPD simulations correctly predict that associative surfactant systems form new nanoscale phases due to the co-assembly of the components. The established ternary phase diagram and the DPD model pave the way towards predicting and controlling the formation of different mesostructures like lamellar or vesicles, opening new avenues to tailor and synthesize desired morphologies for applications related to liquid-in-liquid 3D printing.

Highlighting the efficiency of ultrasound-based emulsifier-free emulsions to penetrate reconstructed human skin

OBJECTIVE

The cosmetic industry endeavours to strengthen the greener and safer claims of processes to respond to the high demand from customers for natural and environmentally friendly products. High Frequency Ultrasonication Technology (HFUT) is a physical process enabling the stabilisation of emulsions without requiring additional ingredients such as Emulsifying Surfactants (ES) to be introduced into the formulations. In this study, key formulation characteristics of an emulsion synthesised by HFUT and a reference emulsion (RE) were compared, as well as the permeation kinetics of caffeine, used as a model active cosmetic ingredient, from both types of emulsions.

METHODS

The pH, particle size and viscosity of emulsions prepared by the HFUT and the RE were determined and compared. The permeation of caffeine from the HFUT emulsion and the RE applied to the surface of reconstructed human epidermis (RHE) models was compared.

RESULTS

The ES-free formulations prepared by HFUT displayed a nearly 2-fold lower average particle size and over 3-fold greater viscosity, compared to the RE. Despite these differences, the absence of ES in the HFUT emulsion did not significantly alter the permeation kinetics of caffeine through RHE. The caffeine steady-state flux, lag time and permeability coefficients differed by 20 to 30% only.

CONCLUSION

This study demonstrates the potential of the HFUT to yield topical cosmetic products with lower requirements ingredients-wise, without losing efficacy, supporting the possible implementation of the technology in the cosmetic industry.

Microemulsion Delivery System Improves Cellular Uptake of Genipin and Its Protective Effect against Aβ1-42-Induced PC12 Cell Cytotoxicity

Genipin has attracted much attention for its hepatoprotective, anti-inflammatory, and neuroprotection activities. However, poor water solubility and active chemical properties limit its application in food and pharmaceutical industries. This article aimed to develop a lipid-based microemulsion delivery system to improve the stability and bioavailability of genipin. The excipients for a genipin microemulsion (GME) preparation were screened and a pseudo-ternary phase diagram was established. The droplet size (DS), zeta potential (ZP), polydispersity index (PDI), physical and simulated gastrointestinal digestion stability, and in vitro drug release properties were characterized. Finally, the effect of the microemulsion on its cellular uptake by Caco-2 cells and the protective effect on PC12 cells were investigated. The prepared GME had a transparent appearance with a DS of 16.17 ± 0.27 nm, ZP of −8.11 ± 0.77 mV, and PDI of 0.183 ± 0.013. It exhibited good temperature, pH, ionic strength, and simulated gastrointestinal digestion stability. The in vitro release and cellular uptake data showed that the GME had a lower release rate and better bioavailability compared with that of free genipin. Interestingly, the GME showed a significantly better protective effect against amyloid-β (Aβ1-42)-induced PC12 cell cytotoxicity than that of the unencapsulated genipin. These findings suggest that the lipid-based microemulsion delivery system could serve as a promising approach to improve the application of genipin.

In vitro percutaneous absorption studies of cannabidiol using human skin: Exploring the effect of drug concentration, chemical enhancers, and essential oils

Cannabidiol, a non-psychoactive constituent of cannabis, has garnered much attention after United States Food and Drug Administration approved Epidiolex® for oral use. Although therapeutic effect of cannabidiol after systemic absorption has been investigated extensively, its therapeutic potential in treating skin disorders after local delivery still needs further exploration. Our study has investigated the effect of cannabidiol concentration, chemical enhancers, and essential oils on percutaneous absorption of cannabidiol. In vitro permeation tests were conducted on human skin. The 24 h study results suggest no significant difference in amount of drug absorbed into skin, between 5% (242.41 ± 12.17 µg/cm²) and 10% (232.79 ± 20.82 cm²) cannabidiol solutions. However, 1% delivered (23.02 ± 4.74 µg/cm²) significantly lower amount of drug into skin than 5% and 10%. Transcutol and isopropyl myristate did not enhance delivery of cannabidiol. However, oleic acid was found to be useful as chemical enhancer. Oleic acid (43.07 ± 10.11 µg/cm²) had significantly higher cannabidiol delivery into skin than the group without oleic acid (10.98 ± 3.40 µg/cm²) after a 4 h in vitro permeation study. Essential oils at concentrations tested had lower total cannabidiol delivery when compared to control. This study's findings will help guide future research on the pharmacological effect of percutaneously delivered cannabidiol on inflammatory skin disorders.

Physicochemical and biopharmaceutical aspects influencing skin permeation and role of SLN and NLC for skin drug delivery

The skin is a complex and multifunctional organ, in which the static versus dynamic balance is responsible for its constant adaptation to variations in the external environment that is continuously exposed. One of the most important functions of the skin is its ability to act as a protective barrier, against the entry of foreign substances and against the excessive loss of endogenous material. Human skin imposes physical, chemical and biological limitations on all types of permeating agents that can cross the epithelial barrier. For a molecule to be passively permeated through the skin, it must have properties, such as dimensions, molecular weight, pKa and hydrophilic-lipophilic gradient, appropriate to the anatomy and physiology of the skin. These requirements have limited the number of commercially available products for dermal and transdermal administration of drugs. To understand the mechanisms involved in the drug permeation process through the skin, the approach should be multidisciplinary in order to overcome biological and pharmacotechnical barriers. The study of the mechanisms involved in the permeation process, and the ways to control it, can make this route of drug administration cease to be a constant promise and become a reality. In this work, we address the physicochemical and biopharmaceutical aspects encountered in the pathway of drugs through the skin, and the potential added value of using solid lipid nanoparticles (SLN) and nanostructured lipid vectors (NLC) to drug permeation/penetration through this route. The technology and architecture for obtaining lipid nanoparticles are described in detail, namely the composition, production methods and the ability to release pharmacologically active substances, as well as the application of these systems in the vectorization of various pharmacologically active substances for dermal and transdermal applications. The characteristics of these systems in terms of dermal application are addressed, such as biocompatibility, occlusion, hydration, emollience and the penetration of pharmacologically active substances. The advantages of using these systems over conventional formulations are described and explored from a pharmaceutical point of view.

Experimental Design and Optimization of Nano-Transfersomal Gel to Enhance the Hypoglycemic Activity of Silymarin

Current advancements in the research investigations focused at using natural products to generate novel dosage forms with a potential therapeutic impact. Silymarin is a natural product obtained from the herb Silybum marianum that has been shown to have remarkable hypoglycemic activity. Owing to the low enteral absorption, instability in stomach secretion, and poor solubility of Silymarin, it was better to be produced as a topical dosage form. A three-factor, three-level Box Behnken (3³ BB) design was constructed to develop 15 formulations using three independent variables (phospholipid concentration, surfactant concentration, and sonication time) and two dependent variables (encapsulation efficiency and in vitro drug release). The optimized formula was added to HPMC gel and the resulting transfersomal gel was investigated for its characteristics, in vitro, ex vivo and hypoglycemic behaviors. The pH of the Silymarin-loaded transfersomal gel was 7.05, the spreadability was 55.35 mm, and the viscosity was 6.27 Pa. Furthermore, Silymarin loaded transfersomal gel had the greatest transdermal flux (92.41 µg/cm²·h), which was much greater than all other formulations. In vivo observations revealed that Silymarin loaded transfersomal gel significantly reduced blood glucose levels, compared to either Silymarin gel or oral Silymarin suspension. The findings show that the developed transfersomal gel could be an effective carrier for Silymarin transdermal delivery.

Therapeutic Potential of Perillaldehyde in Ameliorating Vulvovaginal Candidiasis by Reducing Vaginal Oxidative Stress and Apoptosis

Vulvovaginal candidiasis (VVC) is one of the most frequent diseases induced by Candida albicans (C. albicans) during pregnancy, which results in enormous pain to women and their partners in daily life. Perillaldehyde (PAE), a natural monoterpenoid, has significant anti-microbial, anti-inflammatory and anti-oxidation effects. Reactive oxygen species (ROS) are key factors for the host to resist the invasion of fungi. However, excess ROS can cause additional damage independent of the pathogen itself, and the mechanism of ROS in VVC has not been investigated. In this murine study, we revealed that C. albicans infection increased the expression of NADPH oxidase 2 (NOX2) and the content of malonaldehyde (MDA). C. albicans inhibited the activity of antioxidant enzymes in the vagina, including superoxide dismutase (SOD), Catalase (CAT), glutathione peroxidase (GSH-PX) and heme oxygenase (HO-1), which were returned to normal levels after treatment with PAE. Furthermore, PAE inhibited the activities of Keap1 and promoted Nrf2 transfer from cytoplasm to nucleus, which were mediated by excessive accumulation of ROS in the VVC mice. In this study, we also indicated that PAE inhibited the apoptosis of vagina cells via Caspase 9- Caspase 7-PARP pathway and prevented the release of IL-1ꞵ in VVC mice. In summary, this study revealed that the treatment of VVC in mice with PAE might be mediated by inhibition of ROS, and established the therapeutic potential of PAE as an antifungal agent for the treatment of VVC.