Complexation of oppositely charged polyelectrolytes and surfactants in aqueous solutions. A review

Aminoglycoside/Hexadecanoic Acid Complex Lamellar Core Nanoparticles

An aminoglycoside, tobramycin sulfate (TbS), was complexed with hexadecanoic acid (HdA), resulting in a TbS/HdA complex with a repeat unit of 5.3 nm of a lamellar nanostructure. The nanometer-sized TbS/HdA particles were produced using poloxamer 188 as a dispersing agent. The particles were agglomerate-free with sizes in the range of 90-450 nm. The particle size was controlled by optimizing the homogenization conditions and the concentration of poloxamer-188. The lamellar nanostructure of the TbS/HdA complex was retained in the nanoparticle cores, even after the rigorous homogenization step. These core-shell-type nanoparticles were called lamellosomes because each particle consisted of a TbS/HdA lamellar core surrounded by a crown of hydrophilic poloxamer. The ζ-potentials of nanoparticles were in the range of -20 to -26 mV and did not aggregate even after exposing them up to the concentrations of 0.2 mol  L-1 NaCl. However, the nanoparticles were sensitive to the changes in the pH in terms of their aggregation or disintegration. Thus, the steric effects and ionic charge seem to be responsible for the stabilization of the nanoparticles. The TbS/HdA matrix or HdA lamella could dissolve dexamethasone up to ∼2% (w/w) without causing crystallization. The release of the entrapped drug was significantly retarded. The TbS/HdA lamellosomes could serve as aminoglycoside carriers, which can further load drugs, showing potential as a multidrug cargo.

Design Rules for the Sequestration of Viruses into Polypeptide Complex Coacervates

Encapsulation is a strategy that has been used to facilitate the delivery and increase the stability of proteins and viruses. Here, we investigate the encapsulation of viruses via complex coacervation, which is a liquid-liquid phase separation resulting from the complexation of oppositely charged polymers. In particular, we utilized polypeptide-based coacervates and explored the effects of peptide chemistry, chain length, charge patterning, and hydrophobicity to better understand the effects of the coacervating polypeptides on virus incorporation. Our study utilized two nonenveloped viruses, porcine parvovirus (PPV) and human rhinovirus (HRV). PPV has a higher charge density than HRV, and they both appear to be relatively hydrophobic. These viruses were compared to characterize how the charge, hydrophobicity, and patterning of chemistry on the surface of the virus capsid affects encapsulation. Consistent with the electrostatic nature of complex coacervation, our results suggest that electrostatic effects associated with the net charge of both the virus and polypeptide dominated the potential for incorporating the virus into a coacervate, with clustering of charges also playing a significant role. Additionally, the hydrophobicity of a virus appears to determine the degree to which increasing the hydrophobicity of the coacervating peptides can enhance virus uptake. Nonintuitive trends in uptake were observed with regard to both charge patterning and polypeptide chain length, with these parameters having a significant effect on the range of coacervate compositions over which virus incorporation was observed. These results provide insights into biophysical mechanisms, where sequence effects can control the uptake of proteins or viruses into biological condensates and provide insights for use in formulation strategies.

Polyelectrolyte-Surfactant Complex Nanofibrous Membranes for Antibacterial Applications

Polyelectrolyte-surfactant complexes (PESCs) have garnered significant attention due to their extensive range of biological and industrial applications. Most present applications are predominantly used in liquid or emulsion states, which limits their efficacy in solid material-based applications. Herein, pre-hydrolyzed polyacrylonitrile (HPAN) and quaternary ammonium salts (QAS) are employed to produce PESC electrospun membranes via electrospinning. The formation process of PESCs in a solution is observed. The results show that the degree of PAN hydrolysis and the varying alkyl chain lengths of surfactants affect the rate of PESC formation. Moreover, PESCs/PCL hybrid electrospun membranes are fabricated, and their antibacterial activities against both Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus) are investigated. The resulting electrospun membranes exhibit high bactericidal efficacy, which enables them to serve as candidates for future biomedical and filtration applications.

Hybrid Polymer-Surfactant Wormlike Micelles for Concurrent Use for Oil Recovery and Drag Reduction

We report on the effect of a hydrocarbon (n-dodecane) on the rheological properties and shapes of the hybrid wormlike micelles (WLMs) of a surfactant potassium oleate with an embedded polymer poly(4-vinylpyridine). With and without hydrocarbon solutions, the hybrid micelles exhibit the same values of viscosity at shear rates typical for hydraulic fracturing (HF) tests, as solutions of polymer-free WLMs. Therefore, similar to WLMs of surfactants, they could be applied as thickeners in HF fluids without breakers. At the same time, in the presence of n-dodecane, the hybrid micelles have much higher drag-reducing efficiency compared to microemulsions formed in polymer-free systems since they form "beads-on-string" structures according to results obtained using cryo-transmission electron microscopy (cryo-TEM), dynamic-light scattering (DLS), and small-angle X-ray scattering (SAXS). Consequently, they could also act as drag-reducing agents in the pipeline transport of recovered oil. Such a unique multi-functional additive to a fracturing fluid, which permits its concurrent use in oil production and oil transportation, has not been proposed before.

The evolution of equilibrium poly(styrene sulfonate) and dodecyl trimethylammonium bromide supramolecular structure in dilute aqueous solution with increasing surfactant binding

HYPOTHESIS

In the last 20 years, it has been demonstrated that oppositely charged polyelectrolyte-surfactant (PE-S) mixtures are prone to forming kinetically arrested non-equilibrium aggregates, which are present in the prepared mixtures from rather low surfactant-to-polymer-repeat-unit ratios. Practically, this means that the PE-S mixtures used for the structural investigations of the formed PE-S complexes are typically a mixture of the primary PE-S complexes and large non-equilibrium aggregates of close to charge-neutral complexes.

EXPERIMENTS

In this work, we present a unique approach that allows the preparation of PE-S mixtures in the equilibrium one-phase region (surfactant binding β, is typically below 80%) without forming non-equilibrium aggregates. We used this method to prepare equilibrium, non-aggregated complexes of sodium poly(styrene sulfonate) (NaPSS, Mw = 17 kDa) and dodecyltrimethylammonium bromide (DTAB) (β = 10 - 70%) both in water and in an inert electrolyte (100 mM NaCl). The evolution of the complex structure was monitored by small-angle X-ray scattering (SAXS) as a function of increasing surfactant binding (β), and the measured scattering data were fitted by suitable structural models on an absolute scale where concentrations, compositions, and scattering contrasts calculated from molecular properties are used as restraints.

FINDINGS

We could show that at low binding (β < 30%), the system is a mixture of bare polyelectrolyte coils and NaPSS-DTAB complexes containing a closed surfactant associates of low aggregation number wrapped by the polyelectrolyte chain. Once all polymer chains are occupied by a micelle-like surfactant aggregate, the aggregation number increases linearly with increasing surfactant chemical potential. Using the structural insight provided by the SAXS measurements, we could fit the experimental binding isotherm data with a physically coherent, simple thermodynamic model. Finally, we also compared the stoichiometric NaPSS-DTAB precipitate's structure with the equilibrium complexes' structure.

Regulable Polyelectrolyte-Surfactant Complex for Antibacterial Biomedical Catheter Coating via a Readily Scalable Route

Constructing multifunctional surfaces is one of the practical approaches to address catheter-related multiple complications but is generally time-consuming and substrate-dependent. Herein, a novel anti-adhesion, antibacterial, low friction, and robustness coating on medical catheters are developed via a universal and readily scalable method based on a regulable polyelectrolyte surfactant complex. The complex is rapidly assembled in one step by electrostatic and hydrophobic interactions between organosilicon quaternary ammonium surfactant (N⁺ _Si ) and adjustable polyelectrolyte with cross-linkable, anti-adhesive, and anionic groups. The alcohol-soluble feature of the complex is conducive to the rapid formation of coatings on any medical device with arbitrary shapes via dip coating. Different from the conventional polyelectrolyte-surfactant complex coating, the regulated complex coating with nonleaching mode could be stable in harsh conditions (high concentration salt solution, organic reagents, etc.) because of the cross-linked structure while improving the biocompatibility and reducing the adhesion of various bacteria, proteins, and blood cells. The coated catheter exhibits good antibacterial infection in vitro and in vivo, owing to the synergistic effect of N⁺ _Si and zwitterionic groups. Therefore, the rationally designed complex supplies a facile coating approach for the potential development in combating multiple complications of the medical catheter.

Tuning Properties of Polyelectrolyte-Surfactant Associates in Two-Phase Microfluidic Flows

This work focuses on identifying and prioritizing factors that allow control of the properties of polyelectrolyte-surfactant complexes in two-phase microfluidic confinement and provide advantages over synthesis of such complexes in macroscopic conditions. We characterize the impact of polymer and surfactant aqueous flow conditions on the formation of microscale droplets and fluid threads in the presence of an immiscible organic solvent. We perform an experimental and selected numerical analysis of fast supramolecular reactions in droplets and threads. The work offers a quantitative control over properties of polyelectrolyte-surfactant complexes produced in two-phase confinement by varying capillary numbers and the ratio of aqueous and organic flowrates. We propose a combined thread-droplet mode to synthesize polyelectrolyte-surfactant complexes. This mode allows the production of complexes in a broader size range of R ≈ 70-200 nm, as compared with synthesis in macroscopic conditions and the respective sizes R ≈ 100-120 nm. Due to a minimized impact of undesirable post-chip reactions and ordered microfluidic confinement conditions, the dispersity of microfluidic aggregates (PDI = 0.2-0.25) is lower than that of their analogs synthesized in bulk (PDI = 0.3-0.4). The proposed approach can be used for tailored synthesis of target drug delivery polyelectrolyte-surfactant systems in lab-on-chip devices for biomedical applications.

Polyelectrolyte-Surfactant Complexes As a Formulation Tool for Drug Delivery

Aqueous polyelectrolyte-surfactant complexes (PESCs) are very rich with respect to their properties and the structures formed by them. By design they normally contain hydrophobic micellar surfactant aggregates complexed by long polyelectrolyte chains, thereby combining the formation of small hydrophobic domains given by the surfactant with large-scale structuring due to the presence of the polyelectrolyte chain. In addition, they contain highly polar regions of surfactant head groups in contact with polyelectrolyte, forming a shell around the micellar aggregates, which often also possesses a certain hydrophobic character. Accordingly, the ability for solubilization of water-insoluble compounds of different sorts is particularly versatile in PESCs. Their solubilization sites with very different polarities and hydrophobic characters make them very flexible in adapting to the requirements of a given drug molecule. This renders them attractive for potential applications in drug delivery. In addition, modification of the rheological properties via self-assembly and network formation can be very important in PESC applications. In the following, we discuss the structures of PESCs and their properties, with a focus on the solubilization properties. Subsequently, examples are described where PESCs have been employed in the context of drug solubilization and delivery. These comprise examples with individual aggregates, cross-linked hydrogels, and ones taking advantage of the high solubilization capacity of microemulsions.

Activation and Switching of Supramolecular Chemical Signals in Multi-Output Microfluidic Devices

In this study, we report on the developing of a continuous microfluidic reaction device that allows selective activation of polyelectrolyte-surfactant chemical signals in microflows and switches them between multiple outputs. A numerical model was developed for convection-diffusion reaction processes in reactive polymer-colloid microfluidic flows. Matlab scripts and scaling laws were developed for this model to predict reaction initiation and completion conditions in microfluidic devices and the location of the reaction front. The model allows the optimization of microfluidic device geometry and the setting of operation modes that provide release of the reaction product through specific outputs. Representing a chemical signal, polyelectrolyte-surfactant reaction products create various logic gate states at microfluidic chip outputs. Such systems may have potential as biochemical signal transmitters in organ-on-chip applications or chemical logic gates in cascaded microfluidic devices.

Polyelectrolyte/Surfactant Mixtures: A Pathway to Smart Foams

This review deals with liquid foams stabilized by polyelectrolyte/surfactant (PS) complexes in aqueous solution. It briefly reviews all the important aspects of foam physics at several scales, from interfaces to macroscopic foams, needed to understand the basics of these complex systems, focusing on those particular aspects of foams stabilized by PS mixtures. The final section includes a few examples of smart foams based on PS complexes that have been reported recently in the literature. These PS complexes open an opportunity to develop new intelligent dispersed materials with potential in many fields, such as oil industry, environmental remediation, and pharmaceutical industry, among others. However, there is much work to be done to understand the mechanism involved in the stabilization of foams with PS complexes. Understanding those underlying mechanisms is vital to successfully formulate smart systems. This review is written in the hope of stimulating further work in the physics of PS foams and, particularly, in the search for responsive foams based on polymer-surfactant mixtures.

On-Chip Control over Polyelectrolyte-Surfactant Complexation in Nonequilibrium Microfluidic Confinement

The goal of this work is to classify and quantify the factors that govern polyelectrolyte–surfactant complexation in microfluidic confinement and optimize the designs and operating modes of microfluidic reactors to offer additional advantages over the macroscopic synthesis of such complexes. We analyze and solve a system of governing convection–diffusion–reaction equations to conveniently represent these factors or their combinations as dimensionless similarity criteria. We discuss how these factors contribute to the on-chip control of the reaction initiation, the complex product distribution in a microfluidic device, and the phase behavior of the confined reacting flows and experimentally verify the results in microchips. This approach allows for designing microfluidic devices and setting their operating modes to avoid undesirable clogging by reaction products, control the initiation of the complexation reaction, and produce polyelectrolyte–surfactant aggregates with a broader size range and reduced dispersity.

Stimuli-responsive polyelectrolyte surfactant complexes for the reversible control of solution viscosity

Interactions of polyelectrolytes with oppositely charged surfactants can give rise to a large variety of self-assembled structures. Some of these systems cause a drastic increase in solution viscosity, which is related to the surfactant forming aggregates interconnecting several polyelectrolyte chains. For these aggregates to form, the surfactant needs to be sufficiently hydrophobic. Here, we present a system consisting of the anionic surfactant sodium monododecyl phosphate and the cationic cellulose-based polyelectrolyte JR 400. The hydrophobicity of the surfactant can be controlled by the solution's pH. At pH > 12, the surfactant headgroup bears two charges. As a consequence, the solution viscosity decreases drastically by up to two orders of magnitude, while it can be as high as 10 Pa s at lower pH. In this paper, we investigate the changes of the mesoscopic structure of the system which lead to such drastic changes in viscosity using small angle neutron scattering and neutron spin-echo spectroscopy. Such systems are potentially interesting as they allow for a modular design where stimuli responsiveness is introduced by relatively small amounts of surfactant reusing the same simple polyelectrolyte.

Molecular diffusion in ternary poly(vinyl alcohol) solutions

The diffusion kinetics of a molecular probe—rhodamine B—in ternary aqueous solutions containing poly(vinyl alcohol), glycerol, and surfactants was investigated using fluorescence correlation spectroscopy and dynamic light scattering. We show that the diffusion characteristics of rhodamine B in such complex systems is determined by a synergistic effect of molecular crowding and intermolecular interactions between chemical species. The presence of glycerol has no noticeable impact on rhodamine B diffusion at low concentration, but significantly slows down the diffusion of rhodamine B above 3.9% (w/v) due to a dominating steric inhibition effect. Furthermore, introducing surfactants (cationic/nonionic/anionic) to the system results in a decreased diffusion coefficient of the molecular probe. In solutions containing nonionic surfactant, this can be explained by an increased crowding effect. For ternary poly(vinyl alcohol) solutions containing cationic or anionic surfactant, surfactant—polymer and surfactant—rhodamine B interactions alongside the crowding effect of the molecules slow down the overall diffusivity of rhodamine B. The results advance our insight of molecular migration in a broad range of industrial complex formulations that incorporate multiple compounds, and highlight the importance of selecting the appropriate additives and surfactants in formulated products.

Charge Modification as a Mechanism for Tunable Properties in Polymer-Surfactant Complexes

Oppositely charged polymer-surfactant complexes are frequently explored as a function of phase space defined by the charge ratio Z, (where Z = [+polymer]/[-surfactant]), commonly accessed through the surfactant concentration. Tuning the phase behaviour and related properties of these complexes is an important tool for optimising commercial formulations; hence, understanding the relationship between Z and bulk properties is pertinent. Here, within a homologous series of cationic hydroxyethyl cellulose (cat-HEC) polymers with minor perturbations in the degree of side chain charge modification, phase space is instead explored through [+polymer] at fixed Cpolymer. The nanostructures were characterised by small-angle neutron scattering (SANS) in D2O solutions and in combination with the oppositely charged surfactant sodium dodecylsulfate (h- or d-SDS). Scattering consistent with thin rods with an average radius of ∼7.7 Å and length of ∼85 Å was observed for all cat-HEC polymers and no significant interactions were shown between the neutral HEC polymer and SDS (CSDS < CMC). For the charge-modified polymers, interactions with SDS were evident and the radius of the formed complexes grew up to ∼15 Å with increasing Z. This study demonstrates a novel approach in which the Z phase space of oppositely charged polymer-surfactant complexes can be controlled at fixed concentrations.

A pH-Responsive Foam Formulated with PAA/Gemini 12-2-12 Complexes

In the search for responsive complexes with potential applications in the formulation of smart dispersed systems such as foams, we hypothesized that a pH-responsive system could be formulated with polyacrylic acid (PAA) mixed with a cationic surfactant, Gemini 12-2-12 (G12). We studied PAA-G12 complexes at liquid–air interfaces by equilibrium and dynamic surface tension, surface rheology, and X-ray reflectometry (XRR). We found that complexes adsorb at the interfaces synergistically, lowering the equilibrium surface tension at surfactant concentrations well below the critical micelle concentration (cmc) of the surfactant. We studied the stability of foams formulated with the complexes as a function of pH. The foams respond reversibly to pH changes: at pH 3.5, they are very stable; at pH > 6, the complexes do not form foams at all. The data presented here demonstrate that foam formation and its pH responsiveness are due to interfacial dynamics.

Molecular features of the interaction and antimicrobial activity of chitosan in a solution containing sodium dodecyl sulfate

Molecular interaction of chitosan with sodium dodecyl sulfate (SDS) is a more complicated process than it has been imagined so far. For the first time it has been shown that the shorter chitosan chains are, the more preferably they interact with the SDS and the larger-in-size microparticles they form. The influence of ionic strength, urea and temperature on microparticles formation allows interpreting the mechanism of microparticles formation as a cooperative electrostatic interaction between SDS and chitosan with simultaneous decrease in the surface charge of the complexes initiating the aggregation of microparticles. It is shown that hydrogen bonding is mainly responsible for the aggregation while hydrophobic interaction has a lesser effect. Chitosan demonstrates a high bacteriostatic activity in the presence of SDS in solution and can be promising for preparation of microbiologically stable pharmaceutical hydrocolloids, cosmetic products and chitosan-based Pickering emulsions containing strong anionic surfactants.

Interactions between an Associative Amphiphilic Block Polyelectrolyte and Surfactants in Water: Effect of Charge Type on Solution Properties and Aggregation

The study of interactions between polyelectrolytes (PE) and surfactants is of great interest for both fundamental and applied research. These mixtures can represent, for example, models of self-assembly and molecular organization in biological systems, but they are also relevant in industrial applications. Amphiphilic block polyelectrolytes represent an interesting class of PE, but their interactions with surfactants have not been extensively explored so far, most studies being restricted to non-associating PE. In this work, interactions between an anionic amphiphilic triblock polyelectrolyte and different types of surfactants bearing respectively negative, positive and no charge, are investigated via surface tension and solution rheology measurements for the first time. It is evidenced that the surfactants have different effects on viscosity and surface tension, depending on their charge type. Micellization of the surfactant is affected by the presence of the polymer in all cases; shear viscosity of polymer solutions decreases in presence of the same charge or nonionic surfactants, while the opposite charge surfactant causes precipitation. This study highlights the importance of the charge type, and the role of the associating hydrophobic block in the PE structure, on the solution behavior of the mixtures. Moreover, a possible interaction model is proposed, based on the obtained data.

Polymer-Colloid Complexes Based on Cationic Imidazolium Amphiphile, Polyacrylic Acid and DNA Decamer

The solution behavior and physicochemical characteristics of polymer-colloid complexes based on cationic imidazolium amphiphile with a dodecyl tail (IA-12) and polyacrylic acid (PAA) or DNA decamer (oligonucleotide) were evaluated using tensiometry, conductometry, dynamic and electrophoretic light scattering and fluorescent spectroscopy and microscopy. It has been established that PAA addition to the surfactant system resulted in a ca. 200-fold decrease in the aggregation threshold of IA-12, with the hydrodynamic diameter of complexes ranging within 100-150 nm. Electrostatic forces are assumed to be the main driving force in the formation of IA-12/PAA complexes. Factors influencing the efficacy of the complexation of IA-12 with oligonucleotide were determined. The nonconventional mode of binding with the involvement of hydrophobic interactions and the intercalation mechanism is probably responsible for the IA-12/oligonucleotide complexation, and a minor contribution of electrostatic forces occurred. The latter was supported by zeta potential measurements and the gel electrophoresis technique, which demonstrated the low degree of charge neutralization of the complexes. Importantly, cellular uptake of the IA-12/oligonucleotide complex was confirmed by fluorescence microscopy and flow cytometry data on the example of M-HeLa cells. While single IA-12 samples exhibit roughly similar cytotoxicity, IA-12-oligonucleotide complexes show a selective effect toward M-HeLa cells (IC50 1.1 µM) compared to Chang liver cells (IC50 23.1 µM).

Foams with Enhanced Rheology for Stopping Bleeding

Bleeding from injuries to the torso region is a leading cause of fatalities in the military and in young adults. Such bleeding cannot be stopped by applying direct pressure (compression) of a bandage. An alternative is to introduce a foam at the injury site, with the expansion of the foam counteracting the bleeding. Foams with an active hemostatic agent have been tested for this purpose, but the barrier created by these foams is generally not strong enough to resist blood flow. In this paper, we introduce a new class of foams with enhanced rheological properties that enable them to form a more effective barrier to blood loss. These aqueous foams are delivered out of a double-barrelled syringe by combining precursors that produce bubbles of gas (CO₂) in situ. In addition, one barrel contains a cationic polymer (hydrophobically modified chitosan, hmC) and the other an anionic polymer (hydrophobically modified alginate, hmA). Both these polymers function as hemostatic agents due to their ability to connect blood cells into networks. The amphiphilic nature of these polymers also enables them to stabilize gas bubbles without the need for additional surfactants. hmC-hmA foams have a mousse-like texture and exhibit a high modulus and yield stress. Their properties are attributed to the binding of hmC and hmA chains (via electrostatic and hydrophobic interactions) to form a coacervate around the gas bubbles. Rheological studies are used to contrast the improved rheology of hmC-hmA foams (where a coacervate arises) with those formed by hmC alone (where there is no such coacervate). Studies with animal wound models also confirm that the hmC-hmA foams are more effective at curtailing bleeding than the hmC foams due to their greater mechanical integrity.

Dynamics in polyelectrolyte/microemulsion complexes

Oil-in-water (O/W) microemulsion droplets are convenient carriers for hydrophobic molecules in an aqueous phase and are used for a wide range of applications. We studied weakly charged O/W microemulsion droplets complexed with oppositely charged polyacrylates that form long linear arrangements of droplets. All samples showed rather low viscosities, which is in contrast to similar systems of hydrophobically interconnected droplets. Here, we applied small-angle neutron scattering, dynamic light scattering and neutron spin-echo spectroscopy to characterise the dynamic properties of polyacrylate/microemulsion complexes in order to understand the origin of the low-viscous behaviour. We found that the electrostatic interactions lead to very dynamic complexes with high exchange rates of droplets and only a fraction of the droplets is contained within the transient complexes at a given time. These results were only accessible by the combination of different methods as one method alone would have given an incomplete picture.

Uncommon Structures of Oppositely Charged Hyaluronan/Surfactant Assemblies under Physiological Conditions

Self-assembled aggregates formed by semidilute polyanion hyaluronan (hyaluronic acid, HA) and an oppositely charged surfactant tetradecyltrimethylammonium bromide (TTAB) in an aqueous phosphate-buffered saline (PBS) solution have been studied via light scattering (LS), small-angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM). The addition of 0-20 mM TTAB to a 27.7 mM (monomer, 1 wt %) HA solution (597 kDa) in PBS buffer leads to soluble complexes until phase separation occurs near charge equilibrium (>20 mM TTAB). While the viscosity remains rather constant, already small amounts of added TTAB lead to the formation of large globular superstructures, which are built in a hierarchical fashion from a locally threadlike structural arrangement of TTA micelles along the stiff HA chains, within the little changed HA network. These globular domains have radii of 60-100 nm and contain 500-700 TTA micelles, which means that they are very "fluffy" and composed of about 99% water. They do not grow in size or number upon further TTAB addition, but, instead, the additional TTA micelles form further threadlike complexes outside of the big globular domains. Such a type of polyelectrolyte-surfactant complexes (PESCs) has not been described before and has to be attributed to the particular properties of HA, which are high stiffness and relatively weak interactions with oppositely charged micelles due to having the charged carboxylic group close to the polysaccharide backbone. These findings demonstrate that the HA network structure in solution basically remains unaffected by complexation with an oppositely charged surfactant, explaining the unchanged rheological behavior and the formation of a unique PESC local "coacervate" structure within the HA hydrogel network.

Effects of Polypropylene Glycol at Very Low Concentrations on Rheological Properties at the Air-Water Interface and Foam Stability of Sodium Bis(2-ethylhexyl)sulfosuccinate Aqueous Solutions

The present study investigates the effects of very low concentrations of polypropylene glycol (PPG) on the rheological properties of sodium bis(2-ethylhexyl)sulfosuccinate (AOT) aqueous solutions at the surface for the precise control of foam properties. Langmuir trough experiments and Brewster angle microscopy (BAM) of the AOT monolayer on the surfaces of PPG aqueous solutions indicated that a very low concentration of PPG increased the number of AOT molecules at the surface. Viscoelastic behaviors at the surface and surface tension isotherms in mixed aqueous solutions of AOT and PPG revealed that AOT interacted with PPG in the surface and bulk phase. A modified Ross-Miles method was performed to assess the foam stabilities of AOT aqueous solutions with and without PPG. The stabilization of foam by PPG was attributed to the rheological properties of AOT aqueous solutions at the surface.

Impact of the bulk aggregation on the adsorption of oppositely charged polyelectrolyte-surfactant mixtures onto solid surfaces

The understanding of the deposition of oppositely charged polyelectrolytes-surfactant mixtures onto solid surfaces presents a high interest in current days due to the recognized impact of the obtained layers on different industrial sectors and the performance of several consumer products (e.g. formulations of shampoos and hair conditioners). This results from the broad range of structures and properties that can present the mixed layers, which in most of the cases mirror the association process occurring between the polyelectrolyte chains and the oppositely charged surfactants in the bulk. Therefore, the understanding of the adsorption processes and characteristics of the adsorbed layers can be only attained from a careful examination of the self-assembly processes occurring in the solution. This review aims to contribute to the understanding of the interaction of polyelectrolyte-surfactant mixtures with solid surfaces, which is probably one of the most underexplored aspects of these type of systems. For this purpose, a comprehensive discussion on the correlations between the aggregates formed in the solutions and the deposition of the obtained complexes upon such association onto solid surfaces will be presented. This makes it necessary to take a closer look to the most important forces driving such processes.

Controlling the Emulsion Type Using Adjustable Polyelectrolyte-Surfactant Complexes

The combination of polyelectrolytes and ionic surfactants in precise proportions presents the possibility of producing a new class of emulsifiers with tunable emulsification properties. We use chitosan along with dioctyl sulfosuccinate sodium, also known as aerosol-OT (AOT), to demonstrate that emulsion types can be varied, and phase inversion emulsification (PIE) can be induced via changes in the water-phase pH and the molar ratio of the surfactant to the repeat unit of the polyelectrolyte. Confocal microscopy of the emulsions shows that the morphology can be changed from O/W to O/W/O to W/O by varying the surfactant to polyelectrolyte molar ratio at a fixed aqueous-phase pH while maintaining droplet sizes in the range of micrometers to tens of micrometers. Measurements of the oil (toluene)-water partition coefficient suggest that controlling the emulsion type relies on the ability of the surfactants to partition from the bulk oil to the bulk water phase and to induce polyelectrolyte-surfactant aggregation. We confirm this hypothesis using different combinations of polyelectrolytes and surfactants. Changes in the water-phase pH in situ induce phase inversion only in a particular direction, which suggests that the complexes at the interface are in a kinetically trapped state. Changes in the molar ratio in situ by addition of an oppositely charged surfactant also can induce phase inversion.

Counterion Condensation, the Gibbs Equation, and Surfactant Binding: An Integrated Description of the Behavior of Polyelectrolytes and Their Mixtures with Surfactants at the Air-Water Interface

By applying the Gibbs equation to the bulk binding isotherms and surface composition of the air-water (A-W) interface in polyelectrolyte-surfactant (PE-S) systems, we show that their surface behavior can be explained semiquantitatively in terms of four concentration regions, which we label as A, B, C, and D. In the lowest-concentration range A, there are no bound PE-S complexes in the bulk but there may be adsorption of PE-S complexes at the surface. When significant adsorption occurs in this region, the surface tension (ST) drops with increasing concentration like a simple surfactant solution. Region B extends from the onset of bulk PE-S binding to the end of cooperative binding, in which the slow variation of surfactant activity with cooperative binding means that the ST changes relatively little, although adsorption may be significant. This leads to an approximate plateau, which may be at high or low ST. Region C starts where the binding in the bulk complex loses its cooperativity leading to a rapid change of surfactant activity with the total concentration. This, combined with significant adsorption, often leads to a sharp drop in ST. Region D is where precipitation and redissolution of the bulk PE-S complex occur. ST peaks may arise in region D because of loss of the solution complex that matches the value of the preferred surface stoichiometry, which seems to have a well-defined value for each system. The analysis is applied to the experimental systems, sodium polystyrene sulfonate-alkyltrimethylammonium bromides and poly(diallyldimethyl chloride)-sodium alkyl sulfates, with and without the added electrolyte, and includes data from bulk binding isotherms, phase diagrams, aggregation behavior, and direct measurements of the surface excess and stoichiometry of the surface. The successful fits of the Gibbs equation to the data confirm that the surfaces in these systems are largely equilibrated.

Polyelectrolyte-surfactant-complex nanoparticles as a delivery platform for poorly soluble drugs: A case study of ibuprofen loaded cetylpyridinium-alginate system

Previously, we reported on the surfactant cetylpyridinium chloride (CPC) as a crosslinker of alginate for the formation of stable polyelectrolyte-surfactant-complex nanoparticles. Here, we evaluate this system for increased solubility of a poorly soluble drug. The aim was to use CPC for solubilisation of ibuprofen and to use the micellar associates formed for alginate complexation and nanoparticle formation. We acquired deeper insights into the entropy led interactions between alginate, CPC and ibuprofen. Stable nanoparticles were formed across limited surfactant-to-polyelectrolyte molar ratios, with ~150 nm hydrodynamic diameter, monodispersed distribution, and negative zeta potential (-40 mV), with 34% ibuprofen loading. Their structure was obtained using small-angle X-ray scattering, which indicated disordered micellar associates when ibuprofen was incorporated. This resulted in nanoparticles with a complex nanostructured composition, as shown by transmission electron microscopy. Drug release from ibuprofen-cetylpyridinium-alginate nanoparticles was not hindered by alginate, and was similar to the release kinetics from ibuprofen-CPC solubilisates. These innovative carriers developed as polyelectrolyte-surfactant complexes can be used for solubilisation of poorly soluble drugs, where the surfactant simultaneously increases the solubility of the drug at concentrations below its critical micellar concentration and crosslinks the polyelectrolyte to form nanoparticles.

Physicochemical Aspects of the Performance of Hair-Conditioning Formulations

Most of the currently used products for repairing and conditioning hair rely on the deposition of complex formulations, based on mixtures involving macromolecules and surfactants, onto the surface of hair fibers. This leads to the partial covering of the damaged areas appearing in the outermost region of capillary fibers, which enables the decrease of the friction between fibers, improving their manageability and hydration. The optimization of shampoo and conditioner formulations necessitates a careful examination of the different physicochemical parameters related to the conditioning mechanism, e.g., the thickness of the deposits, its water content, topography or frictional properties. This review discusses different physicochemical aspects which impact the understanding of the most fundamental bases of the conditioning process.

Supramolecular assembly of Toll-like receptor 7/8 agonist into multimeric water-soluble constructs enables superior immune stimulation in vitro and in vivo

Resiquimod or R848 (RSQD) is a Toll-like receptor (TLR) 7/8 agonist which shows promise as vaccine adjuvant due to its potential to promote highly desirable cellular immunity. The development of this small molecule in the field to date has been largely impeded by its rapid in vivo clearance and lack of association with vaccine antigens. Here, we report a multimeric TLR 7/8 construct of nano-scale size, which results from a spontaneous self-assembly of RSQD with a water-soluble clinical-stage polymer - poly[di(carboxylatophenoxy)phosphazene] (PCPP). The formation of ionically paired construct (PCPP-R) and a ternary complex, which also includes Hepatitis C virus (HCV) antigen, has been demonstrated by dynamic lights scattering (DLS), turbidimetry, fluorescence spectroscopy, asymmetric flow field flow fractionation (AF4), and ¹H NMR spectroscopy methods. The resulting supramolecular assembly PCPP-R enabled superior immunostimulation in cellular assays (mouse macrophage reporter cell line) and displayed improved in vitro hemocompatibility (human erythrocytes). In vivo studies demonstrated that PCPP-R adjuvanted HCV formulation induced higher serum neutralization titers in BALB/c mice and shifted the response towards desirable cellular immunity, as evaluated by antibody isotype ratio (IgG2a/IgG1) and ex vivo analysis of cytokine secreting splenocytes (higher levels of interferon gamma (IFN-γ) single and tumor necrosis factor alpha (TNF-α)/IFN-γ double producing cells). The non-covalent multimerization approach stands in contrast to previously suggested RSQD delivery methods, which involve covalent conjugation or encapsulation, and offers a flexible methodology that can be potentially integrated with other parenterally administered drugs.

Synergistic Polymer-Surfactant-Complex Mediated Colloidal Interactions and Deposition

Total internal reflection microscopy (TIRM) is used to directly, sensitively, and simultaneously measure colloidal interactions, dynamics, and deposition for a broad range of polymer-surfactant compositions. A deposition state diagram containing comprehensive information about particle interactions, trajectories, and deposition behavior is obtained for polymer-surfactant compositions covering four decades in both polymer and surfactant concentrations. Bulk polymer-surfactant phase behavior and surface properties are characterized to provide additional information to interpret mechanisms. Materials investigated include cationic acrylamide-acrylamidopropyltrimonium copolymer (AAC), sodium lauryl ether sulfate (SLES) surfactant, silica colloids, and glass microscope slides. Measured colloid-substrate interaction potentials and deposition behavior show nonmonotonic trends vs polymer-surfactant composition and appear to be synergistic in the sense that they are not easily explained as the superposition of single-component-mediated interactions. Broad findings show that at some compositions polymer-surfactant complexes mediate bridging and depletion attractions that promote colloidal deposition, whereas other compositions produce electrosteric repulsion that deters colloidal deposition. These findings illustrate mechanisms underlying colloid-surface interactions in polymer-surfactant mixtures, which are important to controlling selective colloidal deposition in multicomponent formulation applications.

Electrophoretic NMR Characterization of Charged Side Chain Cationic Polyelectrolytes and Their Interaction with the Anionic Surfactant, Sodium Dodecyl Sulfate

Oppositely charged polymers and surfactants show a complex phase behavior with large regions of solubility and insolubility dependent on the concentrations of the species present. Here, a series of quaternized hydroxyethyl cellulose (cationic) polymers have been characterized by pulsed-gradient spin-echo NMR (PGSE-NMR) and electrophoretic NMR (eNMR) in simple aqueous (D₂O) solutions and in combination with the oppositely charged (anionic) surfactant, sodium dodecyl sulfate (SDS). Analysis of the effective charge on the polymer derived from both the eNMR and PGSE-NMR results yields a readily interpretable insight into the polymer behavior; the effective charge on the polymer at infinite dilution shows a linear relationship with the degree of modification. On addition of low concentrations of SDS, typically C_surf < 5 mM, the surfactant interacts with the charged polymers, leading to substantial changes in the dynamics of the system (polymer diffusion, viscosity). At these levels of surfactant addition, there is no macroscopic phase separation. Further, with the absence of an interaction with the parent, the uncharged polymer strongly suggests that the SDS only interacts with the charged moieties present on the functionalized side groups and not the polymer backbone. Ultimately, the charge on the soluble polymer/surfactant complex was found to depend linearly on the level of surfactant binding across a series of polymers with differing levels of modification with the charge becoming effectively zero at the macroscopic phase separation boundary.