Ionic liquids for nano- and microstructures preparation. Part 2: Application in synthesis

Phase Behavior and Structure of Poloxamer Block Copolymers in Protic and Aprotic Ionic Liquids

Ionic liquids are promising media for self-assembling block copolymers in applications such as energy storage. A robust design of block copolymer formulations in ionic liquids requires fundamental knowledge of their self-organization at the nanoscale. To this end, here, we focus on modeling two-component systems comprising a Poly(ethylene oxide)-poly (propylene oxide)-Poly(ethylene oxide) (PEO-PPO-PEO) block copolymer (Pluronic P105: EO37PO58EO37) and room temperature ionic liquids (RTILs): protic ethylammonium nitrate (EAN), aprotic ionic liquids (1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6), or 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4). Rich structural polymorphism was exhibited, including phases of micellar (sphere) cubic, hexagonal (cylinder), bicontinuous cubic, and lamellar (bilayer) lyotropic liquid crystalline (LLC) ordered structures in addition to solution regions. The characteristic scales of the structural lengths were obtained using small-angle X-ray scattering (SAXS) data analysis. On the basis of phase behavior and structure, the effects of the ionic liquid solvent on block copolymer organization were assessed and contrasted to those of molecular solvents, such as water and formamide.

A comparative study on the design and application of new nano benzimidazolium gemini ionic liquids for curing interfacial properties of the crude oil-water system

Gemini surface active ionic liquids (GSAILs) are considered a new prosperous class of ionic liquids and recognized as high performance materials. The present study explores the capabilities of the newly synthesized GSAILs, constructed from two benzimidazole rings attached via a four or a six carbon spacer, namely [C₄benzim-C_n-benzimC₄][Br₂], n = 4 and 6. The products were characterized with FT-IR, NMR, XRD, TGA, DTG and SEM methods and were used in curing interfacial properties of the crude oil-water system. The interfacial tension (IFT) was reduced to about 64 and 71% under critical micelle concentrations (CMCs) of 0.028 and 0.025 mol dm^-3 at 298.2 K for n = 4 and 6 GSAILs, respectively. Temperature significantly assisted this effect. Both the GSAILs could transfer the wettability of the solid surface from oil-wet to water-wet. Further, stable oil/water emulsions were produced, having emulsion indices of 74.2 and 77.3% for n = 4 and 6 GSAILs, respectively. Compared to homologous imidazolium GSAILs, the benzimidazolium products revealed better performance in the sense of exhibiting desired effects on the investigated interfacial properties. These can be attributed to the stronger hydrophobicity of the benzimidazolium rings as well as better spreading of the molecular charges. The Frumkin isotherm could exactly reproduce the IFT data, leading to precise determination of the important adsorption and thermodynamic parameters.

Facile preparation and dielectric properties of BaTiO3 with different particle sizes and morphologies

BaTiO₃ nanoparticles were prepared by the hydrothermal method, and the effect of 1-(propyl-3-methoxysilyl)-3-methylimidazole chloride on the size of BaTiO₃ particles was investigated. The obtained BaTiO₃ was characterized by XRD, SEM, TEM, and Raman spectroscopy; and the dielectric properties of BaTiO₃ ceramic sheets were tested. The results indicate that the spherical BaTiO₃-N prepared without an ionic liquid was in a tetragonal phase with an average particle size of 129 nm. When an ionic liquid was added, the size of the BaTiO₃-IL decreased and the degree of agglomeration increased. In addition, with increasing quantity of ionic liquid, the tetragonal-phase content of BaTiO₃-IL gradually decreased until complete transformation into cubic phase. The dielectric constant of the BaTiO₃-N ceramics was the highest, and the dielectric constant decreased with decreasing BaTiO₃ particle size. Moreover, two types of BaTiO₃ nanoparticles (bowl- and sea urchin-shaped) were prepared by changing the hydrothermal conditions and additives. The average particle size of the former was 92 nm, the tetragonal-phase content was ca. 90%, and the dielectric constant was large; whereas the sea urchin-shaped BaTiO₃ consisted of small particles in the cubic phase, and the dielectric constant was small.

Molecule(s) of Interest: I. Ionic Liquids-Gateway to Newer Nanotechnology Applications: Advanced Nanobiotechnical Uses', Current Status, Emerging Trends, Challenges, and Prospects

Ionic liquids are a potent class of organic compounds exhibiting unique physico-chemical properties and structural compositions that are different from the classical dipolar organic liquids. These molecules have found diverse applications in different chemical, biochemical, biophysical fields, and a number of industrial usages. The ionic liquids-based products and procedural applications are being developed for a number of newer industrial purposes, and academic uses in nanotechnology related procedures, processes, and products, especially in nanobiotechnology and nanomedicine. The current article overviews their uses in different fields, including applications, functions, and as parts of products and processes at primary and advanced levels. The application and product examples, and prospects in various fields of nanotechnology, domains of nanosystem syntheses, nano-scale product development, the process of membrane filtering, biofilm formation, and bio-separations are prominently discussed. The applications in carbon nanotubes; quantum dots; and drug, gene, and other payload delivery vehicle developments in the nanobiotechnology field are also covered. The broader scopes of applications of ionic liquids, future developmental possibilities in chemistry and different bio-aspects, promises in the newer genres of nanobiotechnology products, certain bioprocesses controls, and toxicity, together with emerging trends, challenges, and prospects are also elaborated.

Upgrading the Properties of the Crude Oil-Water System for EOR with Simultaneous Effects of a Homologous Series of NanoGemini Surface-Active Ionic Liquids, Electrolytes, and pH

This study investigated the simultaneous effects of electrolytes, NaCl and MgCl₂ electrolytes, individually and as a mixture, and pH on a homologous series of imidazolium nano-Gemini surface-active ionic liquids (GSAILs), [C₄im-C _m -imC₄][Br₂], where m = 2, 4, and 6. These can improve the properties of the crude oil-water system and consequently enhance the oil recovery. The results precisely revealed that interfacial tension (IFT) and critical micelle concentration were initially decreased with electrolyte concentration up to 55.7 and 58.6%, respectively, in comparison to the salt-free condition, followed by a slight increase. Moreover, adjusting the pH can provide a further improvement so that 79.2% IFT reduction is attained at pH 9.5 compared to that at the natural pH and that GSAILs show high stability in the pH range of 2.5-9.5. Meanwhile, aqueous solutions of crude oil and electrolyte presented 1 day emulsification indices within 43-53%, followed by minor changes after 1 week. Interestingly, the emulsification index of 77.1% was attained at pH 9.5. Surface wettability was also favorably altered from oil-wet to water-wet with the nanoGSAILs. The findings of this study help gain a better understanding of the effects of nanosurface active materials to improve oil extraction under reservoir conditions.

Synthesis, Characterization and Photocatalytic Behavior of SiO2 @nitrized-TiO2 Nanocomposites Obtained by a Straightforward Novel Approach

We report on the facile synthesis of SiO2 @nitrized-TiO2 nanocomposite (NST) by calcination of TiO2 xerogel with OctaAmmonium POSS® (N-POSS; POSS=polyhedral oligomeric silsesquioxanes). The as-obtained nanoporous mixed oxide is constituted by uniformly distributed SiO2 and nitrized-TiO2 , where the silica component is present in an amorphous state and TiO2 in an anatase/rutile mixed phase (92.1 % vs. 7.9 %, respectively) with very small anatase crystallites (3.7 nm). The TiO2 lattice is nitrized both at interstitial and substitutional positions. NST features a negatively charged surface with a remarkable surface area (406 m2  g-1 ), endowed with special adsorption capabilities towards cationic dyes. Its photocatalytic behavior was tested by following the degradation of standard aqueous methylene blue and methyl orange solutions under UV and visible light irradiation, according to ISO 10678:2010. For comparison, analogous investigations were carried out on a silica-free N-TiO2 , obtained by using NH4 Cl as nitrogen source.

Computational approach to (ZnS)_{i} nanoclusters in ionic liquids

Unique and attractive properties have been predicted for II-VI-type semiconductor nanoclusters within the field of nanotechnology. However, the low reaction kinetics within the usual solvents gives only thermodynamic control during their production process, making the obtention of different metastable polymorphs extremely difficult. The use of ionic liquids as solvents has been proposed to overcome this problem. Identifying how these nanoclusters are solvated within ionic liquids is fundamental if this strategy is to be pursued. While computational chemistry tools are best suited for this task, the complexity and size of the system requires a careful design of the simulation protocol, which is put forward in this work. Taking as reference the (ZnS)_{12} nanocluster and the [EMIM][EtSO_{4}] ionic liquid, we characterize the interactions between the nanoparticle and first solvation shell by density functional theory calculations, considering most of the solvent implicitly. The DFT results are consistent through different theory levels showing a strong interaction between the Zn atoms of the nanocluster and the [EtSO_{4}^{-}] anion of the ionic liquid. A more realistic representation of the system is obtained by classical MD calculations, for which various classical force fields were considered and several atomic interactions parameterized. This new set of parameters correctly describes the interaction of different (ZnS) nanoclusters, supporting its transferability. The resulting MD simulation shows the formation of a structured ionic liquid solvation shell around the nanocluster with no exchange of ions for at least 5 ns, in agreement with the strong interactions observed in the density functional theory calculations.

Uniform heterostructured MnOx/MnCO3/Fe2O3 nanocomposites assembled in an ionic liquid for highly selective oxidation of 5-hydroxymethylfurfural

Uniform heterostructured MnO_x/MnCO₃/Fe₂O₃ nanocomposites assembled in the ionic liquid 1-butyl-3-methyl-imidazolium chloride ([BMim]Cl) exhibit highly selective oxidation of 5-hydroxymethylfurfural to 2,5-diformylfuran.

Green synthesis and environmental application of iron-based nanomaterials and nanocomposite: A review

Green chemistry has been proven to be an efficient route for nanoparticle synthesis. Plant extract based green synthesis of various nanoparticles is extensively studied since the last decade. This paper "Green synthesis and environmental application of Iron-based nanomaterials and nanocomposite: A review" unveils all the possible greener techniques for the synthesis of iron-based nanoparticles and nanocomposites. The use of different plant sources, microorganisms, and various biocompatible green reagents such as biopolymers, cellulose, haemoglobin, and glucose for the synthesis of iron nanoparticles reported in the last decade are summarized. The microwave method, along with hydrothermal synthesis due to their lower energy consumption are also been referred to as a green route. Apart from different plant parts, waste leaves and roots used for the synthesis of iron nanoparticles are extensively briefed here. This review is thus compact in nature which covers all the broad areas of green synthesis of iron nanoparticles (NPs) and iron-based nanocomposites. Detailed discussion on environmental applications of the various green synthesized iron NPs and their composites with performance efficiency is provided in this review article. The advantages of bimetallic iron-based nanocomposites over iron NPs in various environmental applications are discussed in detail. The hazards and toxic properties of green synthesized iron-based NPs are compared with those obtained from chemical methods. The prospects and challenges section of this article provides a vivid outlook of adapting such useful technique into a more versatile process with certain inclusions which may encourage and provide a new direction to future research.

Quantum chemistry study of the interaction between ionic liquid-functionalized TiO2 quantum dots and methacrylate resin: Implications for dental materials

Quantum Chemistry calculations within the density functional Theory (DFT) are a powerful feature to obtain the atomistic and molecular properties of macromolecules such as polymers and nanoparticles. DFT calculations are essential to understand the stability of new composite materials. In this work, DFT with the Local Density Approximation (LDA) and norm-conserving pseudopotentials is used to analyze the energetic stability as well the electronic properties when titanium dioxide quantum dots (TiO_2QDs) are added to an adhesive resin (methacrylate - HEMA - and dimethacrylate - BisGMA - monomers), which presents reliable physical, chemical, and biological properties in dentistry. The ionic liquid 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMI.BF₄) was previously used to functionalize the quantum dots, forming the complex system TiO₂QDs/BMI.BF₄. DFT provides the most stable configuration through binding energies and bond distances analysis. Our results show that van der Waals interactions between BisGMA and HEMA may contribute to the stabilization of the interaction between the resin and TiO₂QDs/BMI.BF₄. Furthermore, according to experimental results, the calculations show that the presence of the ionic liquid increases the quantum dots and resin interactions (binding energies), suggesting that the ionic liquid is important to stabilize the TiO₂QDs/BMI.BF₄-resin composite.

Properties of Dicationic Disiloxane Ionic Liquids

A number of dicationic ionic liquids with a disiloxane linker between imidazolium cations and bis(trifluoromethylsulfonyl)imide anion were synthesized and characterized. Melting points, viscosity, and volatility in a vacuum were measured; the thermal and hydrolytic stability of ionic liquids were also studied. The dependence of the properties on the structure of substituents in the cation of the ionic liquid was demonstrated.

Theoretical and Experimental Studies on the Visible Light Activity of TiO2 Modified with Halide-Based Ionic Liquids

Formation of a surface complex between organic molecules and TiO2 is one of the possible strategies for the development of visible light-induced TiO2 photoactivity. Herein, three ionic liquids (ILs) with the same cation and different anions (1-butylpirydynium chloride/bromide/iodide) have been applied for the surface modification of TiO2 and to understand the role of anions in visible light-induced activity of ILs-TiO2 systems. Photocatalytic screening tests (the measurements of phenol photodegradation reaction rate) revealed that anion type affected visible light activity (λ > 420 nm) of TiO2 obtained by the ILs-assisted solvothermal method. Density functional theory (DFT) calculations demonstrated that interactions between halogen anions and oxygen vacancies (OV) on the surface of the TiO2 particles could be responsible for the specific wavelength-induced excitation and finally for the observed photoactivity of titania under visible light. Finally, our theoretical calculations have been proven by experiments using monochromatic light (the apparent quantum efficiency was measured) and the properties of obtained samples were characterized using scanning electron microscopy (SEM), X-ray powder diffraction analysis (XRD), UV-Vis spectroscopy and X-ray photoelectron spectroscopy (XPS).

Methylene Blue Catalytic Degradation Using Silver and Magnetite Nanoparticles Functionalized with a Poly(ionic liquid) Based on Quaternized Dialkylethanolamine with 2-Acrylamido-2-methylpropane Sulfonate-co-Vinylpyrrolidone

Catalytic degradation of organic water pollutants has emerged as a cost- and energy-effective technique to treat wastewater. In this work, new silver and magnetite nanoparticles (NPs) were prepared with a protic poly(ionic liquid) (PIL) based on a quaternized diethylethanolamine cation combined with 2-acrylamido-2-methylpropane sulfonate-co-vinylpyrrolidone (QAMPSA/VP) as a capping and a reducing agent. The morphology, particle size, surface charge, thermal stability, and magnetic properties of QAMPS/VP-Ag and Fe₃O₄ NPs were investigated to determine the efficiency of the PIL as a reducing and a capping agent to protect the produced NPs from oxidation or thermal degradation. The activation energy, enthalpy, and entropy of the catalytic degradation of the cationic methylene blue (MB) dye in the presence of QAMPS/VP-Ag and Fe₃O₄ NPs were determined. The data elucidated that MB was completely degraded in 8 min in the presence of QAMPS/VP-Fe₃O₄ NPs as a Fenton oxidation catalyst. Moreover, their good magnetic properties allowed their easy separation and reuse for five cycles without losing their magnetic or catalytic properties.

Acylselenoureato bis(chelates) of lead: synthesis, structural characterization and microwave-assisted formation of PbSe nano- and microstructures

Three lead(ii) bis(acylselenoureato) complexes were prepared by reaction of the respective acylselenourea compounds with Pb(OAc)₂. One of these lead complexes was converted into PbSe nano- and microstructures by microwave-assisted synthesis.

A 10 minute approach for the phase specific synthesis of Se nanoparticles with tunable morphology: their anticancer efficacy and the role of an ionic liquid

The current work demonstrates a rapid and highly facile controlled phase-specific synthesis of Se nanoparticles, their anticancer efficacy and the 3-in-1 role of a RTIL.

Brief bibliometric analysis of "ionic liquid" applications and its review as a substitute for common adsorbent modifier for the adsorption of organic pollutants

The importance of improving adsorbent's adsorption efficiency in organic pollutants has been reported by many researchers. Surfactant-based modified adsorbents were a tasteful choice. As a result, the use of surfactants as a modifier for removing organic pollutants has shown to play a very big role in enhancing the adsorption efficiency of different materials. Ionic liquids are receiving extensive interest as green multipurpose compounds, primarily as a replacement for traditional chemicals that are used in many chemical processes. This work gives a brief bibliometric analysis of application of ionic liquid from 1930 to 2017, documents were collected from Scopus database and keywords from the abstracts and titles were analyzed using VOSviewer software. Furthermore, the work presents a review of conventionally known surfactants and the recent likelihood of ionic liquids for modifying adsorbents for adsorption of organic pollutants. Over the period of years between 1930 and 2017, 13,144 documents were published on the application of ionic liquids. VOSviewer software further confirms that adsorption is one of the leading areas in applications of ionic liquids. Review also showed that ionic liquid is a good modifier of adsorbents.

Rare earth nanofluorides: synthesis using ionic liquids

This review presents a comprehensive summary of the research progress on the synthesis of rare earth fluoride nanomaterials using the most common methods of synthesis. Special focus is on syntheses utilising ionic liquids, which is a new and promising way of preparing nanomaterials without the use of dangerous organic solvents (toxic, flammable, or combustive). Rare earth fluoride nanoparticles can be obtained with a high yield, purity, and crystallinity, and with different morphologies and luminescent properties depending on the selected method of synthesis.

Impact of Tetrazolium Ionic Liquid Thermal Decomposition in Solvothermal Reaction on the Remarkable Photocatalytic Properties of TiO2 Particles

Ionic liquids (ILs) could serve as a structuring agent, a solvent, or a source of dopant during solvothermal synthesis of semiconductors particles. To understand the role of IL during formation of TiO₂ particles, it is necessary to study the stability of this IL in solvothermal synthesis conditions, as well as studying the surface properties of formed TiO₂ particles. In view of this, the effect of the 2,3,5-triphenyltetrazolium chloride IL ([TPTZ][Cl]) thermal decomposition during the solvothermal reaction and IL content in the reaction system on photoactivity of TiO₂ microparticles has been systematically investigated. The samples obtained by using [TPTZ][Cl] exhibited remarkable photocatalytic properties in phenol degradation reaction under visible light. HPLC analysis of the solvothermal reaction medium and X-ray photoelectron spectroscopy (XPS) analysis of TiO₂ particles revealed that [TPTZ][Cl] was decomposed completely and was incorporated into the TiO₂ lattice. Generally, increasing the reaction time (1, 4, 12, and 24 h) promoted the TiO₂ microspheres formation, as well as raising the visible light-induced photocatalytic activity of the photocatalysts. Longer reaction time was also accompanied by an increase in the efficiency of 2,3,5-triphenyltetrazolium chloride decomposition. The properties of the photocatalysts were investigated by means of UV-VIS diffuse reflectance spectroscopy (DRS), BET surface area measurements, scanning electron microscopy (SEM), X-ray powder diffraction (XRD) analysis, and XPS.

Green chemical engineering in China

In China, the rapid development greatly promotes the national economic power and living standard but also inevitably brings a series of environmental problems. In order to resolve these problems fundamentally, Chinese scientists have been undertaking research in the area of green chemical engineering (GCE) for many years and achieved great progresses. In this paper, we reviewed the research progresses related to GCE in China and screened four typical topics related to the Chinese resources characteristics and environmental requirements, i.e. ionic liquids and their applications, biomass utilization and bio-based materials/products, green solvent-mediated extraction technologies, and cold plasmas for coal conversion. Afterwards, the perspectives and development tendencies of GCE were proposed, and the challenges which will be faced while developing available industrial technologies in China were mentioned.

Thermodynamic properties of selenoether-functionalized ionic liquids and their use for the synthesis of zinc selenide nanoparticles

Three selenoether-functionalized ionic liquids (ILs) of N-[(phenylseleno)methylene]pyridinium (1), N-(methyl)- (2) and N-(butyl)-N'-[(phenylseleno)methylene]imidazolium (3) with bis(trifluoromethanesulfonyl)imide anions ([NTf2]) were prepared from pyridine, N-methylimidazole and N-butylimidazole with in situ obtained phenylselenomethyl chloride, followed by ion exchange to give the desired compounds. The crystal structures of the bromide and tetraphenylborate salts of the above cations (1-Br, 2-BPh4 and 3-BPh4) confirm the formation of the desired cations and indicate a multitude of different supramolecular interactions besides the dominating Coulomb interactions between the cations and anions. The vaporization enthalpies of the synthesized [NTf2]-containing ILs were determined by means of a quartz-crystal microbalance method (QCM) and their densities were measured with an oscillating U-tube. These thermodynamic data have been used to develop a method for assessment of miscibility of conventional solvents in the selenium-containing ILs by using Hildebrandt solubility parameters, as well as for modeling with the electrolyte perturbed-chain statistical associating fluid theory (ePC-SAFT) method. Furthermore, structure-property relations between selenoether-functionalized and similarly shaped corresponding aryl-substituted imidazolium- and pyridinium-based ILs were analyzed and showed that the contribution of the selenium moiety to the enthalpy of vaporization of an IL is equal to the contribution of a methylene (CH2) group. An incremental approach to predict vaporization enthalpies of ILs by a group contribution method has been developed. The reaction of these ILs with zinc acetate dihydrate under microwave irradiation led to ZnSe nanoparticles of an average diameter between 4 and 10 nm, depending on the reaction conditions.

Fabrication and photoactivity of ionic liquid-TiO2 structures for efficient visible-light-induced photocatalytic decomposition of organic pollutants in aqueous phase

To investigate the effect of the ionic liquid (IL) chain length on the surface properties and photoactivity of TiO₂, a series of TiO₂ microspheres have been synthesized via a solvothermal method assisted by 1-methyl-3-octadecylimidazolium chloride ([ODMIM][Cl]) and 1-methyl-3-tetradecylimidazolium chloride ([TDMIM][Cl]). All as-prepared samples were characterized by X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS), scanning transmission microscopy (STEM) and the Brunauer-Emmett-Teller (BET) surface area method, whereas the photocatalytic activity was evaluated by the degradation of phenol in aqueous solution under visible light irradiation (λ > 420 nm). The highest photoefficiency (four times higher than pristine TiO₂) was observed for the TiO₂ sample obtained in the presence of [TDMIM][Cl] for a IL to TiO₂ precursor molar ratio of 1:3. It was revealed that interactions between the ions of the ionic liquid and the surface of the growing titanium dioxide spheres results in a red-shift of absorption edge for the IL-TiO₂ semiconductors. In this regard, the direct increase of the photoactivity of IL-TiO₂ in comparison to pristine TiO₂ was observed. The active species trapping experiments indicated that O₂^•- is the main active species, created at the surface of the IL-TiO₂ material under visible-light illumination, and is responsible for the effective phenol degradation.

Synthesis of vanadium phosphorus oxide catalysts promoted by iron-based ionic liquids and their catalytic performance in selective oxidation ofn-butane

Catalytic performance of undoped and Fe-doped VPO catalysts.

Ionic liquid and nanoparticle hybrid systems: Emerging applications

Having novel electronic and optical properties that emanate from their nano-scale dimensions, nanoparticles are central to numerous applications. Ionic liquids can confer to nanoparticle chemical protection and physicochemical property enhancement through intermolecular interactions and can consequently improve the stability and reusability of nanoparticle for various operations. With an aim to combine the novel properties of nanoparticles and ionic liquids, different structures have been generated, based on a balance of several intermolecular interactions. Such ionic liquid and nanoparticle hybrids are showing great potential in diverse applications. In this review, we first introduce various types of ionic liquid and nanoparticle hybrids, including nanoparticle colloidal dispersions in ionic liquids, ionic liquid-grafted nanoparticles, and nanoparticle-stabilized ionic liquid-based emulsions. Such hybrid materials exhibit interesting synergisms. We then highlight representative applications of ionic liquid and nanoparticle hybrids in the catalysis, electrochemistry and separations fields. Such hybrids can attain better stability and higher efficiency under a broad range of conditions. Novel and enhanced performance can be achieved in these applications by combining desired properties of ionic liquids and of nanoparticles within an appropriate hybrid nanostructure.

Application of polymer-based membranes containing ionic liquids in membrane separation processes: a critical review

The interest in ionic liquids, particularly in polymerizable ionic liquids, is motivated by their unique properties, such as good thermal stability, negligible vapor pressure, and wide electrochemical window. Due to these features ionic liquids were proposed to be used in the membrane separation technology. The utilization of conventional ionic liquids is, however, limited by their release from the membrane during the given separation process. Therefore, the incorporation of polymerizable ionic liquids may overcome this drawback for the industrial application. This work is a comprehensive overview of the advances of ionic liquid membranes for the separation of various compounds, i.e. gases, organic compounds, and metal ions.

Current status and future challenges in ionic liquids, functionalized ionic liquids and deep eutectic solvent-mediated synthesis of nanostructured TiO2: a review

This review is on current advancements in IL-mediated synthesis of TiO₂, and the potential for future research in this area.

A comparative AFM study of the interfacial nanostructure in imidazolium or pyrrolidinium ionic liquid electrolytes for zinc electrochemical systems

AFM measurements show that the electrochemical performance of zinc based ionic liquid electrolytes is controlled by ion arrangements at the electrode surface.

Transport properties of microemulsions with ionic liquid apolar domains as a function of ionic liquid content

The conductivity, dynamic viscosity and diffusion coefficient of aqueous ionic liquid microemulsions were measured as a function of ionic liquid content. ​The conclusions from transport properties were supported by UV-Vis as well as FTIR measurements.