Magnetic nanocarriers: Evolution of spinel ferrites for medical applications

Bio-inspired multifunctional and reusable LiP@MFO-GO and LiP@MFO-Chit hybrid enzyme complexes for efficient degradation of melanin

Melanin is a complex brown pigment, primarily responsible for the skin pigmentation. Therefore, cosmetic industries have always been in search of potent oxidative enzymes useful for melanin degradation, and to promise a fair complexion after using their products. In the present study, lignin peroxidase from Pseudomonas fluorescence LiP-RL5 isolate has been immobilized on super-paramagnetic nanoparticles to enhance its stability and reusability. The chitosan coated enzyme-nanomaterial complex (LiP@MFO-Chit) showed higher melanin decolorization (47.30 ± 2.3 %) compared to the graphene oxide coated nanoparticles (LiP@MFO-GO) (41.60 ± 1.6 %). Synthesized enzyme nanoparticle complexes showed microbicidal effect on skin infection causing pathogen, Pantoea agglomerans with an inhibitory zone of 6.0 ± 0.9 mm and 250 µg/100 µl minimum inhibitory concentration, and a 7.0 ± 1.5 mm zone and 170 µg/100 µl MIC for LiP@MFO-GO and LiP@MFO-Chit, respectively. Antioxidant potential of LiP@MFO-Chit and LiP@MFO-GO nano-conjugates showed a substantial DPPH scavenging activity of 75.7 % and 88.3 %, respectively. Therefore, LiP-nanoparticle hybrid complexes analyzed in this study are not only effective as skin whitening agents but they are potential molecules against various microbial skin infections as well as useful for different other biomedical applications like biorefinery, drug delivery, and dermatology, etc.

Insight mechanism of magnetic activated catalyst derived from recycled steel residue for black liquor degradation

The present work deals with developing a method for revalorizing steel residues to create sunlight-active photocatalysts based on iron oxides. Commercial-grade steel leftovers are oxidized under different combinations of pH and temperature (50-90 °C and 3 ≥ pH ≤ 5) in a low energy-intensive setup. The material with the highest production efficiency (yield > 12%) and magnetic susceptibility (χm = 387 × 10-6 m3/kg) was further explored and modified by diffusion of M2+ (Zn and Co) ions within the structure of the oxide using a hydrothermal method to create ZnFe2O4, CoFe2O4 and combined Co-Zn ferrite. (Co-Zn)Fe2O4 displayed a bandgap of 2.02 eV and can be activated under sunlight irradiation. Electron microscopy studies show that (Co-Zn)Fe2O4 consists of particles with diameters between 400 and 700 nm, homogeneous size, even distribution, and good dispersibility. Application of the developed materials in the sunlight catalysis of black liquors from cellulose extraction resulted in a reduction of the Chemical Oxygen Demand (- 15% on average) and an enhancement in biodegradability (> 0.57 BOD/COD) after 180 min of reaction. Since the presented process employs direct solar light, it opens the possibility to large-scale water treatment and chemical upgrading applications.

Design of silver-zinc-nickel spinel-ferrite mesoporous silica as a powerful and simply separable adsorbent for some textile dye removal

Silver-zinc-nickel spinel ferrite was prepared by the co-precipitation procedure with the precise composition Ag0.1Zn0.4Ni0.5Fe2O4 for bolstering pollutant removal effectiveness while upholding magnetic properties and then coated with a mesoporous silica layer. The surface characteristics and composition of Ag0.1Zn0.4Ni0.5Fe2O4@mSiO2 were confirmed using EDX, FT-IR, VSM, XRD, TEM, SEM, and BET methods. The surface modification of Ag-Zn-Ni ferrite with a silica layer improves the texture properties, where the specific surface area and average pore size of the spinel ferrite rose to 180 m2/g and 3.15 nm, respectively. The prepared spinel ferrite@mSiO2 has been utilized as an efficient adsorbent for eliminating methyl green (MG) and indigo carmine (IC) as models of cationic and anionic dyes from wastewater, respectively. Studying pH, Pzc, adsorbent dosage, dye concentration, and temperature showed that efficient removal of MG was carried out in alkaline media (pH = 12), while the acid medium (pH = 2) was effective for IC removal. Langmuir isotherm and pseudo-second-order kinetics were found to be good fits for the adsorption data. Both dyes were adsorbed in a spontaneous, endothermic process. A possible mechanism for dye removal has been proposed. The adsorbent was effectively recovered and reused.

Removal of organic and inorganic effluents from wastewater by using degradation and adsorption properties of transition metal-doped nickel ferrite

Removal of water pollutants (methylene blue dye and heavy metals) was achieved by zinc/manganese-doped nickel ferrites (Ni1 - xMxFe2O4, where x = 0.00, 0.025, 0.10). Degradation of dye was achieved under natural solar light illumination. Degradation studies of dye were conducted under different parameters such as contact time-80 min, dye's concentration-5 mg/L, pH-7, and dosage of ferrites-15 mg. The adsorption of dye was studied using non-linear kinetics models (pseudo-first-order and pseudo-second-order) and isotherm models (Langmuir and Freundlich). The adsorption of dye followed pseudo-first-order kinetics (R2 = 0.99377) than second-order kinetics (R2 = 0.98063) and Langmuir isotherm model (R2 = 0.96095) than Freundlich model (R2 = 0.95962) with maximum adsorption efficiency of 29.62 mg/g. Doping of nickel ferrites caused an increase in the removal percentage of methylene blue dye (80 to 90%) and inorganic effluents (75 to 95% for lead and 47 to 82% for cadmium). In addition to this, band gap energy (2.43 to 3.26 eV) (UV-Vis spectroscopy), pore radius (65.2 to 74.8 A°), and specific surface area (16.45 to 27.95 m2/g) (BET analysis) were also increased. Generally, the results of the study revealed that synthesized nanoparticles can act as potential candidate for the removal of effluents from wastewater under optimum parameters along with recyclability, reusability, and separation under the influence of a magnetic field.

Advances in inorganic nanoparticles-based drug delivery in targeted breast cancer theranostics

Theranostic nanoparticles (NPs) have the potential to dramatically improve cancer management by providing personalized medicine. Inorganic NPs have attracted widespread interest from academic and industrial communities because of their unique physicochemical properties (including magnetic, thermal, and catalytic performance) and excellent functions with functional surface modifications or component dopants (e.g., imaging and controlled release of drugs). To date, only a restricted number of inorganic NPs are deciphered into clinical practice. This review highlights the recent advances of inorganic NPs in breast cancer therapy. We believe that this review can provides various approaches for investigating and developing inorganic NPs as promising compounds in the future prospects of applications in breast cancer treatment and material science.

Anti-Inflammatory and Antioxidant Effects of Rosmarinic Acid Trimetallic (Cu0.5Zn0.5Fe2O4) Nanoparticles

Newly, green metallic-nanoparticles (NPs) have received scientists' interest due to their wide variable medicinal applications owned to their economical synthesis and biologically compatible nature. In this study, we used rosmarinic acid (RosA) to prepare Cu0.5Zn0.5FeO4 NPs and later encapsulated them using PEG polymer. Characterization of NPs was done using the XRD method and SEM imaging. Further, we explored the encapsulated NPs for anti-inflammatory properties by downregulating the expression of pro-inflammatory cytokines mRNA in LPS-stimulated Raw 264.7 cells. Besides, employing DPPH, NO and ABTS radical scavenging assays to examine the antioxidant activity of the synthesized Cu0.5Zn0.5FeO4 NPs. Cu0.5Zn0.5FeO4 NPs revealed moderate antioxidant activity by scavenging DPPH and nitric oxide. We demonstrated that the NPs showed high potential anti-inflammatory activity by suppressing the mRNA and protein levels of pro-inflammatory cytokines in a dose-dependent manner, in LPS-induced Raw 264.7 cells. To our best knowledge, this is the first report where RosA was found to be a suitable phyto source for the green synthesis of Cu0.5Zn0.5FeO4 NPs and their in vitro anti-inflammatory and antioxidant effects. Taken together, our findings suggest that the RosA is a green resource for the eco-friendly synthesis of Cu0.5Zn0.5FeO4/PEG NPs, which further can be employed as a novel anti-inflammatory therapeutic agent.

Harnessing solar power for enhanced photocatalytic degradation of coloured pollutants using novel Mg-doped-ZnFe2O4/S@g-C3N4 heterojunction: A facile hydrothermal synthesis approach

The ability of heterogeneous photocatalysis to effectively remove organic pollutants from wastewater has shown great promise as a tool for environmental remediation. Pure zinc ferrites (ZnFe2O4) and magnesium-doped zinc ferrites (Mg@ZnFe2O4) with variable percentages of Mg (0.5, 1, 3, 5, 7, and 9 mol%) were synthesized via hydrothermal route and their photocatalytic activity was checked against methylene blue (MB) taken as a model dye. FTIR, XPS, BET, PL, XRD, TEM, and UV-Vis spectroscopy were used for the identification and morphological characterization of the prepared nanoparticles (NPs) and nanocomposites (NCs). The 7% Mg@ZnFe2O4 NPs demonstrated excellent degradation against MB under sunlight. The 7% Mg@ZnFe2O4 NPs were integrated with diverse contents (10, 50, 30, and 70 wt.%) of S@g-C3N4 to develop NCs with better activity. When the NCs were tested to degrade MB dye, it was revealed that the 7%Mg@ZnFe2O4/S@g-C3N4 NCs were more effective at utilizing solar energy than the other NPs and NCs. The synergistic effect of the interface formed between Mg@ZnFe2O4 and S@g-C3N4 was primarily responsible for the boosted photocatalytic capability of the NCs. The fabricated NCs may function as an effective new photocatalyst to remove organic dyes from wastewater.

Genotoxicity and heating Performance of VxFe3-xO4 nanoparticles in Health applications

The applications of magnetic nanoparticles (MNPs) as biocatalysts in different biomedical areas have been evolved very recently. One of the main challenges in this field is to design affective MNPs surfaces with catalytically active atomic centres, while producing minimal toxicological side effects on the hosting cell or tissues. MNPs of vanadium spinel ferrite (VFe2O4) are a promising material for mimicking the action of natural enzymes in degrading harmful substrates due to the presence of active V5+ centres. However, the toxicity of this material has not been yet studied in detail enough to grant biomedical safety. In this work, we have extensively measured the structural, compositional, and magnetic properties of a series of VxFe3-xO4 spinel ferrite MNPs to assess the surface composition and oxidation state of V atoms, and also performed systematic and extensive in vitro cytotoxicity and genotoxicity testing required to assess their safety in potential clinical applications. We could establish the presence of V5+ at the particle surface even in water-based colloidal samples at pH 7, as well as different amounts of V2+ and V3+ substitution at the A and B sites of the spinel structure. All samples showed large heating efficiency with Specific Loss Power values up to 400 W/g (H0 = 30 kA/m; f = 700 kHz). Samples analysed for safety in human hepatocellular carcinoma (HepG2) cell line with up to 24h of exposure showed that these MNPs did not induce major genomic abnormalities such as micronuclei, nuclear buds, or nucleoplasmic bridges (MNIs, NBUDs, and NPBs), nor did they cause DNA double-strand breaks (DSBs) or aneugenic effects-types of damage considered most harmful to cellular genetic material. The present study is an essential step towards the use of these type of nanomaterials in any biomedical or clinical application.

Targeting ferroptosis for leukemia therapy: exploring novel strategies from its mechanisms and role in leukemia based on nanotechnology

The latest findings in iron metabolism and the newly uncovered process of ferroptosis have paved the way for new potential strategies in anti-leukemia treatments. In the current project, we reviewed and summarized the current role of nanomedicine in the treatment and diagnosis of leukemia through a comparison made between traditional approaches applied in the treatment and diagnosis of leukemia via the existing investigations about the ferroptosis molecular mechanisms involved in various anti-tumor treatments. The application of nanotechnology and other novel technologies may provide a new direction in ferroptosis-driven leukemia therapies. The article explores the potential of targeting ferroptosis, a new form of regulated cell death, as a new therapeutic strategy for leukemia. It discusses the mechanisms of ferroptosis and its role in leukemia and how nanotechnology can enhance the delivery and efficacy of ferroptosis-inducing agents. The article not only highlights the promise of ferroptosis-targeted therapies and nanotechnology in revolutionizing leukemia treatment, but also calls for further research to overcome challenges and fully realize the clinical potential of this innovative approach. Finally, it discusses the challenges and opportunities in clinical applications of ferroptosis.

Fe3O4@SiO2@CSH+VO3- as a novel recyclable heterogeneous catalyst with core-shell structure for oxidation of sulfides

Iron nanoparticles, with low toxicity and many active sites, are among the materials that not only reduce waste along with green chemistry but also increase the separation power and recover the catalyst from the reaction environment. In this study, first, the surface of iron nanoparticles was silanized, and in the next step, the complex of chitosan HCl.VO3 was placed on the surface of Fe3O4 (Fe3O4@SiO2@CSH+VO3-). This nanocatalyst is a novel, recoverable, and potent nanocatalyst with high selectivity for the oxidation of sulfides to sulfoxides. Various physicochemical techniques such as IR, XRD, TGA, SEM, EDX, mapping, TEM, and VSM were used to affirm the well synthesis of the catalyst. Oxidation of sulfides in the presence of hydrogen peroxide as a green oxidant and in ethanol was catalyzed by the Fe3O4@SiO2@CSH+VO3-. All sulfoxides were achieved with high efficiency and in a short time. The notable privileges of this method include facile and economic catalyst synthesis, proper catalyst durability, great performance, simple catalyst isolation, good recovery capability, at least up to 5 times without an index drop in catalytic power.

Lanthanide-Assisted Nanozyme Performs Optical and Magnetic Resonance Dual-Modality Logical Signal for In Vitro Diagnosis

The iron nanozyme-based colorimetric method, which is widely applied for biosubstrate detection in in vitro diagnosis (IVD), faces some limitations. The optimal catalytic conditions of iron nanozymes necessitate a strong acidic environment, high temperature, and other restrictive factors; additionally, the colorimetric results are highly influenced by optical interferences. To address these challenges, iron nanozymes doped with various transition elements were efficiently prepared in this study, and notably, the manganese-modified one displayed a high catalytic activity owing to its electron transfer property. Furthermore, the introduction of lanthanide ions into the catalytic reactions, specifically the neodymium ion, significantly boosted the generation efficiency of hydroxyl radicals; importantly, this enhancement extended to a wide range of pH levels and temperatures, amplifying the detection signal. Moreover, the nanozyme's superparamagnetic characteristic was also employed to perform a logical optical and magnetic resonance dual-modality detection for substrates, effectively eliminating background optical interference and ensuring a reliable verification of the signal's authenticity. Based on this magnetic signal, the integration of natural glucose oxidase with the nanozyme resulted in a notable 61.5% increase in detection sensitivity, surpassing the capabilities of the traditional colorimetric approach. Consequently, the incorporation of lanthanide ions into the magnetic nanozyme enables the effective identification of physiological biomarkers through the dual-modality signal. This not only guarantees enhanced sensitivity but also demonstrates significant potential for future applications.

Carbon Nanomaterials for Biomedical Applications: Progress and Outlook

Recent developments in nanoscale materials have found extensive use in various fields, especially in the biomedical industry. Several substantial obstacles must be overcome, particularly those related to nanostructured materials in biomedicine, before they can be used in therapeutic applications. Significant concerns in biomedicine include biological processes, adaptability, toxic effects, and nano-biointerfacial properties. Biomedical researchers have difficulty choosing suitable materials for drug carriers, cancer treatment, and antiviral uses. Carbon nanomaterials are among the various nanoparticle forms that are continually receiving interest for biomedical applications. They are suitable materials owing to their distinctive physical and chemical properties, such as electrical, high-temperature, mechanical, and optical diversification. An individualized, controlled, dependable, low-carcinogenic, target-specific drug delivery system can diagnose and treat infections in biomedical applications. The variety of carbon materials at the nanoscale is remarkable. Allotropes and other forms of the same element, carbon, are represented in nanoscale dimensions. These show promise for a wide range of applications. Carbon nanostructured materials with exceptional mechanical, electrical, and thermal properties include graphene and carbon nanotubes. They can potentially revolutionize industries, including electronics, energy, and medicine. Ongoing investigation and expansion efforts continue to unlock possibilities for these materials, making them a key player in shaping the future of advanced technology. Carbon nanostructured materials explore the potential positive effects of reducing the greenhouse effect. The current state of nanostructured materials in the biomedical sector is covered in this review, along with their synthesis techniques and potential uses.

Three-Dimensional Modeling with Osteoblast-like Cells under External Magnetic Field Conditions Using Magnetic Nano-Ferrite Particles for the Development of Cell-Derived Artificial Bone

The progress in artificial bone research is crucial for addressing fractures and bone defects in the aging population. However, challenges persist in terms of biocompatibility and structural complexity. Nanotechnology provides a promising avenue by which to overcome these challenges, with nano-ferrite particles (NFPs) exhibiting superparamagnetic properties. The ability to control cell positioning using a magnetic field opens up new possibilities for customizing artificial bones with specific shapes. This study explores the biological effects of NFPs on osteoblast-like cell lines (MC3T3-E1), including key analyses, such as cell viability, cellular uptake of NFPs, calcification processes, cell migration under external magnetic field conditions, and three-dimensional modeling. The results indicate that the impact of NFPs on cell proliferation is negligible. Fluorescence and transmission electron microscopy validated the cellular uptake of NFPs, demonstrating the potential for precise cell positioning through an external magnetic field. Under calcification-inducing conditions, the cells exhibited sustained calcification ability even in the presence of NFPs. The cell movement analysis observed the controlled movement of NFP-absorbing cells under an external magnetic field. Applying a magnetic field along the z-axis induced the three-dimensional shaping of cells incorporating NFPs, resulting in well-arranged z-axis directional patterns. In this study, NFPs demonstrated excellent biocompatibility and controllability under an external magnetic field, laying the foundation for innovative treatment strategies for customizing artificial bones.

Inorganic nanocarriers for siRNA delivery for cancer treatments

RNA interference is one of the emerging methodologies utilized in the treatment of a wide variety of diseases including cancer. This method specifically uses therapeutic RNAs (TpRNAs) like small interfering RNAs (siRNAs) to regulate/silence the cancer-linked genes, thereby minimizing the distinct activities of the cancer cells while aiding in their apoptosis. But, many complications arise during the transport/delivery of these TpRNAs that include poor systemic circulation, instability/degradation inside the body environment, no targeting capacity and also low cellular internalization. These difficulties can be overcome by using nanocarriers to deliver the TpRNAs inside the cancer cells. The following are the various categories of nanocarriers-viral vectors (e.g. lentivirus and adenovirus) and non-viral nanocarriers (self-assembling nanocarriers and inorganic nanocarriers). Viral vectors suffer from disadvantages like high immunogenicity compared to the non-viral nanocarriers. Among non-viral nanocarriers, inorganic nanocarriers gained significant attention as their inherent properties (like magnetic properties) can aid in the effective cellular delivery of the TpRNAs. Most of the prior reports have discussed about the delivery of TpRNAs through self-assembling nanocarriers; however very few have reviewed about their delivery using the inorganic nanoparticles. Therefore, in this review, we have mainly focussed on the delivery of TpRNAs-i.e. siRNA, especially programmed death ligand-1 (PD-L1), survivin, B-cell lymphoma-2 (Bcl-2), vascular endothelial growth factor and other siRNAs using the inorganic nanoparticles-mainly magnetic, metal and silica nanoparticles. Moreover, we have also discussed about the combined delivery of these TpRNAs along with chemotherapeutic drugs (mainly doxorubicin) andin vitroandin vivotherapeutic effectiveness.

A comprehensive review on the applications of ferrite nanoparticles in the diagnosis and treatment of breast cancer

Various conventional treatments including endocrine therapy, radiotherapy, surgery, and chemotherapy have been used for several decades to treat breast cancer; however, these therapies exhibit various life-threatening and debilitating adverse effects in patients. Additionally, combination therapies are required for prompt action as well as to prevent drug resistance toward standard breast cancer medications. Ferrite nanoparticles (NPs) are increasingly gaining momentum for their application in the diagnosis and treatment of breast cancer. Spinel ferrites are particularly used against breast cancer and have shown in vitro and in vivo better efficacy as compared to conventional cancer therapies. Magnetic resonance imaging contrast agents, magnetic particle imaging tracers, cell separation, and immune assays are some aspects related to the diagnosis of breast cancer against which different ferrite NPs have been successfully evaluated. Moreover, citrate-coated nickel ferrite, Mg/Zn ferrites, poly amidoamine dendrimers, cobalt ferrites, graphene oxide cobalt ferrites, doxorubicin functionalized cobalt ferrites, chitosan-coated zinc ferrites, PEG-coated cobalt ferrite, and copper ferrite NPs have demonstrated antiproliferative action against different breast cancer cells. Oxaliplatin-loaded polydopamine/BSA-copper ferrites, functionalized cobalt and zinc ferrites of curcumin, oxaliplatin-copper ferrite NPs, tamoxifen/diosgenin encapsulated ZnO/Mn ferrites, and fabricated core-shell fibers of doxorubicin have been developed to increase the bioavailability and anti-proliferative effect and decrease the toxicity of anticancer drugs. These ferrite NPs showed an anticancer effect at different doses in the presence or absence of an external magnetic field. The present review covers the in-depth investigations of ferrite NPs for the diagnosis and management of breast cancer.

Green synthesis of cobalt ferrite and Mn doped cobalt ferrite nanoparticles: Anticancer, antidiabetic and antibacterial studies

BACKGROUND

CoFe2O4 are important magnetic NPs with high coercivity and moderate magnetization. These properties of CoFe2O4 NPs show variation when doped with various metals. Recent studies explained that Cobalt ferrites doped with metal ion like Mn+2, have attracted increasing attention in many applications, particularly in biomedical applications. A relatively simple way is employing plants and their extracts as precursors instead of toxic chemicals to produce NPs with desirable characteristic. In current study we report green synthesis and characterization of magnetic (CoFe2O4, MnCoFe2O4, CoFe2O4@S.C, MnCoFe2O4@S.C) nanoparticles using ethanolic extract of Swertia Chirata. To enhance application as biocompatible magnetic nano drug delivery vector and cell targeting efficacy of drugs, Glimepiride (GLM), Dexamethasone (DXM), Fexofenadine (FEX) and Levofloxacin (LVX) 1were loaded on synthesized NPs. Synthesized CFNPs has been broadly characterized and applied for in vitro anticancer, antidiabetic and antibacterial potential.

METHODS

For synthesis of CoFe2O4 (CF), CoMnFe2O4 (CFM), CoFe2O4@S.C (SCF) & CoMnFe2O4 @S.C (SCFM), stochiometric amounts 5 mmol of CoCl2·6 H2O (0.284 g) and 10 mmol FeCl3·6 H2O (0.378 g) were dissolved in 13 mL of deionized water. To this sodium acetate (3.05 g) and urea (0.6 g) were added until complete dissolution. Afterward n-heptane was added, and contents were then transferred to Teflon lining autoclave at 180 °C for 4 h. Black powder CoFe2O4 NPs after washing, were dried and calcined at 450 oC for 2 h.

RESULTS

XRD diffractogram of CF have proved the single-phase cubic spinel structure formation for all samples. Swertia Chirata formulations were shown to have effective in vitro antidiabetic activity. CF, CFM & SCFM showed good inhibition of α-glucosidase with very low concentration 6 µg/mL, 5 µg/mL and 4 µg/mL as compare to 12.41 µg/mL of acarbose. SCF showed that the value slightly higher than 16 µg/mL compared to standard. Drug loaded CFNPs (L-CFNPs, F-CFNPs, D-CFNPs & G-CFNPs) also effectively inhibited α-glucosidase. IC50 value for CFNPs inhibition of α-glucosidase was 12.4 µg/mL. All synthesized CF NPs showed cytotoxic potential against breast cancer cells MCF-7. About 50-60% cell viability and cytotoxicity 40% were observed for bare CFNPs as compare to Doxorubicin with related toxicity 80% and 20% cell viability. Among synthesized samples almost all samples without conjugation of any drug showed activities against at least one bacterial strain. CFM, SCF, SCFM were active against S. aureus at concentration 100 µg/mL, 100 µg/mL, and 50 µg/mL respectively.

CONCLUSION

The synthesized CF NPs showed significant cytotoxic potential against MCF-7 breast cancer cell line. Further, drug loaded samples displayed lesser cell viability and slightly increased cytotoxicity in range of 40-50% in comparison with bare CFNPs. However, higher toxicity was observed for CFMGS towards MCF-7 cells with results nearly equal to Doxorubicin with significant decrease in viability. CF, CFM & SCFM showed good inhibition of α-glucosidase with very low concentration 6 µg/mL, 5 µg/mL and 4 µg/mL as compare to 12.41 µg/mL of acarbose. Among synthesized samples almost all samples without conjugation of any drug showed activities against at least one bacterial strain.

Nanotechnology development in surgical applications: recent trends and developments

This paper gives a detailed analysis of nanotechnology's rising involvement in numerous surgical fields. We investigate the use of nanotechnology in orthopedic surgery, neurosurgery, plastic surgery, surgical oncology, heart surgery, vascular surgery, ophthalmic surgery, thoracic surgery, and minimally invasive surgery. The paper details how nanotechnology helps with arthroplasty, chondrogenesis, tissue regeneration, wound healing, and more. It also discusses the employment of nanomaterials in implant surfaces, bone grafting, and breast implants, among other things. The article also explores various nanotechnology uses, including stem cell-incorporated nano scaffolds, nano-surgery, hemostasis, nerve healing, nanorobots, and diagnostic applications. The ethical and safety implications of using nanotechnology in surgery are also addressed. The future possibilities of nanotechnology are investigated, pointing to a possible route for improved patient outcomes. The essay finishes with a comment on nanotechnology's transformational influence in surgical applications and its promise for future breakthroughs.

Newly Synthesized CoFe2-xDyxO4 (x = 0; 0.1; 0.2; 0.4) Nanoparticles Reveal Promising Anticancer Activity against Melanoma (A375) and Breast Cancer (MCF-7) Cells

The current study focuses on the synthesis via combustion of dysprosium-doped cobalt ferrites that were subsequently physicochemically analyzed in terms of morphological and magnetic properties. Three types of doped nanoparticles were prepared containing different Dy substitutions and coated with HPGCD for higher dispersion properties and biocompatibility, and were later submitted to biological tests in order to reveal their potential anticancer utility. Experimental data obtained through FTIR, XRD, SEM and TEM confirmed the inclusion of Dy3+ ions in the nanoparticles' structure. The size of the newly formed nanoparticles ranged between 20 and 50 nm revealing an inverse proportional relationship with the Dy content. Magnetic studies conducted by VSM indicated a decrease in remanent and saturation mass magnetization, respectively, in Dy-doped nanoparticles in a direct proportionality with the Dy content; the decrease was further amplified by cyclodextrin complexation. Biological assessment in the presence/absence of red light revealed a significant cytotoxic activity in melanoma (A375) and breast (MCF-7) cancer cells, while healthy keratinocytes (HaCaT) remained generally unaffected, thus revealing adequate selectivity. The investigation of the underlying cytotoxic molecular mechanism revealed an apoptotic process as indicated by nuclear fragmentation and shrinkage, as well as by Western blot analysis of caspase 9, p53 and cyclin D1 proteins. The anticancer activity for all doped Co ferrites varied was in a direct correlation to their Dy content but without being affected by the red light irradiation.

Pr3+ Ion-Substituted Ni-Co Nano-Spinel Ferrites: Their Synthesis, Characterization, and Biocompatibility for Colorectal Cancer and Candidaemia

Nanotherapeutics have attracted tremendous research interest in the modern pharmaceutical and biomedical industries due to their potential for drug development, targeted delivery, and therapeutic applications. Therefore, the current study underpins the synthesis of praseodymium ion (Pr3+)-substituted Ni0.5Co0.5Fe2O4 nano-spinel ferrites, (Co0.5Ni0.5PrxFe2-xO4 (0.0 ≤ x ≤ 0.10) NSFs, CoNiPr (x ≤ 0.10) NSFs) via the sonochemical route for its application as a nanotherapeutic treatment option. The synthesized nanomaterial was characterized using various analytical techniques, including scanning/transmission electron microscopy (SEM) and X-ray powder diffractometry (XRD). After substitution with Pr (x = 0.08), the particle size, polydispersity index, and zeta potential analysis indicated an increase in hydrodynamic diameter, with an average zeta potential value of -10.2 mV. The investigation of CoNiPr (x ≤ 0.10) NSFs on colorectal cancer (HCT-116) cells demonstrated a significant effect on cancer cell viability. The inhibitory concentration (IC50) of CoNiPr (x ≤ 0.10) NSFs was between 46 ± 0.91 and 288 ± 8.21 for HCT-116 cells. The effect of CoNiPr (x ≤ 0.10) NSFs on normal human embryonic kidney (HEK-293) cells showed a reduction in the HEK-293 cell viability; however, the cell viability was better than HCT-116. The NSFs treatment also showed morphological changes in cancer cell nuclei, as revealed by DAPI (4',6-diamidino-2-phenylindole), nuclear disintegration, and chromatic fragmentation, which are signs of apoptosis or programmed cell death. To examine the potential antifungal effects of CoNiPr NSFs on Candida albicans, known to cause candidemia among cancer patients, the viability of the cells was assessed post treatment with CoNiPr (x ≤ 0.10) NSFs. The increasing ratio of dopant had a moderate impact on the percentage of cell viability loss of 42, 44, and 43% with x = 0.06, 0.08, and 0.10, respectively. These results reinforce that increased dopant significantly impacts the antifungal properties of the synthesized nanomaterial. These findings support the idea that NSFs might be useful in pharmaceuticals.

Nanocomposites Based on Polyethylene and Nickel Ferrite: Preparation, Characterization, and Properties

Composite materials based on NiFe2O4 nanoparticles and polyethylene matrix have been synthesized by thermal decomposition to expand the application area of high-pressure polyethylene by filling it with nanoscale particles. The synthesized compositions were obtained in the form of a dark gray powder and compressed for further study According to TEM, the average particle size in composites was 2, 3, and 4 nm in samples with a filling of 10%, 20% and 30%. The concentration dependences of the specific electrical resistivity ρV, dielectric permittivity ε, saturation magnetization MS and the parameters of reflection and attenuation of microwave power of the obtained composites were investigated. The threshold for percolation in such materials is found to be within a concentration range of 20…30%. The electronic and atomic structure of composites was studied by methods of Mössbauer spectroscopy, X-ray diffraction and X-ray absorption spectroscopy. The closest atomic environment of nickel and iron in nanoparticles is close to that of crystalline NiFe2O4. The dependence of the nanoparticles size as well as the dependence of the number of tetrahedral or octahedral iron positions in nickel ferrite nanoparticles to their content in polyethylene matrix is established. It is shown that composite materials based on NiFe2O4 nanoparticles and polyethylene matrix can be used as components of electromagnetic compatibility systems.

Benchmark Crystal Structure of Defect-Free Spinel ZnFe2O4

Accurate structural models are of paramount importance for elucidating structure-property relationships in functional materials. Spinels (AB2O4) form a highly important family of materials with complex crystal structures, and subtle structural details have a critical bearing on understanding their physical properties. In some spinels, the space group symmetry is debated, and in general, point defects such as cation inversion and interstitials add complexity. Most studies of spinels concern powder materials, and this challenges deep structural characterization. In fact, most published spinel structures have dubious atomic displacement parameters (ADPs), which is a typical sign of problematic structural description in the refinement of diffraction data. Here, we use various X-ray and neutron diffraction techniques to establish a benchmark crystal structure for the essentially defect-free spinel ferrite ZnFe2O4, which is a widely studied frustrated magnet. It is shown that the appearance of Fd3̅m forbidden reflections in the ZnFe2O4 single-crystal neutron diffraction data is an artifact of multiple scattering rather than the loss of inversion symmetry. We then provide benchmark ADPs and demonstrate how strongly these parameters affect the refined cation inversion. The ADPs reported here may be used as reference data to test the soundness of refined structural models, possibly to constrain those based on suboptimal data quality, and thereby provide a more accurate fundamental understanding of the structure-property relationship in spinel-type materials.

Temperature-Induced Irreversible Structural Transition in Fe1.1Mn1.9O4 Nanoparticles Synthesized by Combustion Method

Fe_1.1Mn_1.9O₄ nanoparticles were successfully synthesized using a combustion method. The influence of the heating temperature on the evolution of the structural and magnetic properties has been studied using various methods. The structural analysis results revealed that as-synthesized nanoparticles have a tetragonal structure with an average size of ~24 nm. The magnetic measurements of the sample showed its ferrimagnetic nature at room temperature with hysteresis at low fields. Temperature-dependent magnetization measurements allowed for the conclusion that the Curie temperature for Fe_1.1Mn_1.9O₄ nanoparticles was ~465 °C. After high-temperature magnetic measurements, during which the samples were heated to various maximum heating temperatures (T_max.heat.) in the range from 500 to 900 °C, it was found that the structure of the samples after cooling to room temperature depended on the heating temperature. Herewith, when the heating temperature was 600 < T_max.heat. < 700 °C, an irreversible structural phase transition occurred, and the cooled samples retained a high-temperature cubic structure. The results of the magnetic analysis showed that the samples, following high-temperature magnetic measurements, demonstrated ferrimagnetic behavior.

A Review of Advanced Multifunctional Magnetic Nanostructures for Cancer Diagnosis and Therapy Integrated into an Artificial Intelligence Approach

The new era of nanomedicine offers significant opportunities for cancer diagnostics and treatment. Magnetic nanoplatforms could be highly effective tools for cancer diagnosis and treatment in the future. Due to their tunable morphologies and superior properties, multifunctional magnetic nanomaterials and their hybrid nanostructures can be designed as specific carriers of drugs, imaging agents, and magnetic theranostics. Multifunctional magnetic nanostructures are promising theranostic agents due to their ability to diagnose and combine therapies. This review provides a comprehensive overview of the development of advanced multifunctional magnetic nanostructures combining magnetic and optical properties, providing photoresponsive magnetic platforms for promising medical applications. Moreover, this review discusses various innovative developments using multifunctional magnetic nanostructures, including drug delivery, cancer treatment, tumor-specific ligands that deliver chemotherapeutics or hormonal agents, magnetic resonance imaging, and tissue engineering. Additionally, artificial intelligence (AI) can be used to optimize material properties in cancer diagnosis and treatment, based on predicted interactions with drugs, cell membranes, vasculature, biological fluid, and the immune system to enhance the effectiveness of therapeutic agents. Furthermore, this review provides an overview of AI approaches used to assess the practical utility of multifunctional magnetic nanostructures for cancer diagnosis and treatment. Finally, the review presents the current knowledge and perspectives on hybrid magnetic systems as cancer treatment tools with AI models.

Magneto-mechanical therapeutic effects and associated cell death pathways of magnetic nanocomposites with distinct geometries

Recent years have witnessed important developments in the emerging field of magneto-mechanical therapies. While such approaches have been demonstrated as a highly efficient route to augment, complement, or entirely replace other therapeutic strategies, important aspects are still poorly understood. Among these, the dependence between the cell death pathway and the geometry of magnetic nanocomposites enabling magneto-mechanical therapies under a low-frequency rotating magnetic field (RMF) is yet to be deciphered. To provide insights into this important problem, we evaluate the cell death pathway for two magnetic nanocomposites with highly distinct geometries: Zn_0.2Fe_2.8O₄-PLGA magnetic nanospheres (MNSs) and Zn_0.2Fe_2.8O₄-PLGA magnetic nanochains (MNCs). We show that under exposure to an RMF, the MNSs and the MNCs exhibit a corkscrewed circular propulsion mode and a steering propulsion mode, respectively. This distinct behavior, with important implications for the associated magneto-mechanical forces exerted by these nanomaterials on surrounding structures (e.g., the cellular membrane), depends on their specific geometries. Next, using numerical simulations and cell viability experiments, we demonstrate that the field strength of the RMF and the rotating speed of the MNSs or MNCs have strong implications for their magneto-mechanical therapeutic performance. Last, we reveal that the magneto-mechanical effects of MNSs are more prone to induce cell apoptosis, whereas those of the MNCs favor instead cell necrosis. Overall, this work enhances the current understanding of the dependences existing between the magneto-mechanical therapeutic effects of magnetic nanocomposites with different geometries and associated cell death pathways, paving the way for novel functionalization routes which could enable significantly enhanced cures and biomedical tools. STATEMENT OF SIGNIFICANCE.

Magnetic Bacterial Cellulose Biopolymers: Production and Potential Applications in the Electronics Sector

Bacterial cellulose (BC) is a biopolymer that has been widely investigated due to its useful characteristics, such as nanometric structure, simple production and biocompatibility, enabling the creation of novel materials made from additive BC in situ and/or ex situ. The literature also describes the magnetization of BC biopolymers by the addition of particles such as magnetite and ferrites. The processing of BC with these materials can be performed in different ways to adapt to the availability of materials and the objectives of a given application. There is considerable interest in the electronics field for novel materials and devices as well as non-polluting, sustainable solutions. This sector influences the development of others, including the production and optimization of new equipment, medical devices, sensors, transformers and motors. Thus, magnetic BC has considerable potential in applied research, such as the production of materials for biotechnological electronic devices. Magnetic BC also enables a reduction in the use of polluting materials commonly found in electronic devices. This review article highlights the production of this biomaterial and its applications in the field of electronics.

Dopamine and DNA functionalized manganese whitlockite nanocrystals for magnetic resonance imaging and chemo-photothermal therapy of tumors

Multifunctional inorganic nanomaterials have opened new avenues for cancer diagnosis and therapy. However, the difficulty to functionalize them has prevented their wider application, owing to the lack of active groups on their surfaces. Here we report a novel method to functionalize manganese whitlockite (Mn-WH) with polydopamine (PDA) and hairpin DNA (hpDNA) to improve the water stability and anti-cancer effects of Mn-WH nanoparticles (Mn-WH NPs). Compared to WH NPs, the Mn-WH@PDA-hpDNA NPs exhibit better water dispersibility, high drug loading capacity, excellent photothermal performance, stable MRI imaging ability, and outstanding chemo-photothermal synergistic therapeutic potential against tumors. After intratumoral injection in nude mice, the Mn-WH@PDA-hpDNA-DOX NPs promote complete tumor ablation upon exposure to 808 laser-irradiation. The nanoparticles showed no major side effects or toxicity. Thus, these results indicate that the Mn-WH@PDA-hpDNA-DOX NPs have excellent potential as anti-cancer agents, along with excellent magnetic resonance imaging (MRI) capabilities and the reported functionalization approach provides a novel and effective strategy for the surface functionalization of inorganic nanomaterials.

Impact of Gd3+ doping on structural, electronic, magnetic, and photocatalytic properties of MnFe2O4 nanoferrites and application in dye-polluted wastewater remediation

The present work focuses on developing Gd-doped Mn spinel nanoferrites and their potential application in the photodegradation of water pollutants. The impact of Gd³⁺ ion substitution on structural, electronic, and magnetic characteristics of manganese ferrites has been studied. Nanocrystalline samples of MnGd_xFe_2-xO₄ (x = 0.0 to 0.10, in step size of 0.02) ferrites were prepared via sol-gel self-ignition route. The Rietveld, XPS, HRTEM, and SAED characterization methods confirmed the formation of phase pure ferrite nanoparticles (~ 8-22 nm) in the cubic spinel structure. The Gd³⁺ content in these nanoferrites responded to a systematic reduction in the size of nanocrystallites and an upsurge in the density of nanoferrites. The XPS study revealed fine assimilation of constituent elements in the fcc lattice and ruled out impurities in the nanoferrites. The Fe and the Gd ions were found to be in Fe³⁺ and Gd³⁺ states, respectively. While a major fraction of the Mn ions were found to be in the Mn²⁺ state, a small fraction of Mn⁴⁺ ions was observed on the surface of nanoparticles. The nanoferrites were found to exhibit a soft ferromagnetic state from 300 to 20 K limits. The highest saturation magnetization was observed for x = 0.02 (M_S = 66.6 emu/g at 20 K). The observed magnetic properties can be understood with the competing (Fe³⁺ and Mn²⁺)_A-O^2--[Fe³⁺, Mn²⁺, and Gd³⁺]_B superexchange interactions and magnetocrystalline anisotropy. Due to the small band gap energy of Gd-doped Mn ferrites than that of the pure Mn ferrite, they have demonstrated excellent photocatalytic activity for the degradation of methylene blue (MB) dye under visible light illumination. As much as 96.35% of the MB dye was found to get degraded in 70 min of light illumination over synthesized nanoparticles and the photodegradation reaction followed pseudo-first-order kinetics. The increased optical absorbance due to lower band gap, suppressed recombination rate of charge carriers, and enhanced charge mobility make them effective visible light active photocatalysts. This study revealed that the electronic, optical, and magnetic properties of MnFe₂O₄ nanoferrites could be easily tuned by varying the Gd³⁺ content and the prepared Gd-doped MnFe₂O₄ nanomaterials have boundless potential to be utilized in the future making promising active photocatalysts and degradation of harmful industrial dyes for enhanced protection in the fields of environment and health care.

PEG-Coated MnZn Ferrite Nanoparticles with Hierarchical Structure as MRI Contrast Agent

In this work, MnZn ferrite nanoparticles with hierarchical morphology were synthesized hydrothermally, and their surface characteristics were improved by the PEGylation process. In vitro MRI studies were also conducted to evaluate the ability of the synthesized nanoparticles as a contrast agent. All results were compared with those obtained for MnZn ferrite nanoparticles with normal structure. Microstructural evaluations showed that in ferrite with hierarchical morphology, the spherical particles with an average size of ~20 nm made a distinctive structure consisting of rows of nanoparticles which is a relatively big assembly like a dandelion. The smaller particle size and dandelion-like morphology led to an increase in specific surface area for the hierarchical structure (~69 m²/g) in comparison to the normal one (~30 m²/g) with an average particle size of ~40 nm. In vitro MRI, cytotoxicity and hemocompatibility assays confirmed the PEG-coated MnZn ferrite nanoparticles with hierarchical structure synthesized in the current study can be considered as an MRI contrast agent.

Recent Advances in the Development of Novel Iron–Copper Bimetallic Photo Fenton Catalysts

Advanced oxidation processes (AOPs) have been postulated as viable, innovative, and efficient technologies for the removal of pollutants from water bodies. Among AOPs, photo-Fenton processes have been shown to be effective for the degradation of various types of organic compounds in industrial wastewater. Monometallic iron catalysts are limited in practical applications due to their low catalytic activity, poor stability, and recyclability. On the other hand, the development of catalysts based on copper oxides has become a current research topic due to their advantages such as strong light absorption, high mobility of charge carriers, low environmental toxicity, long-term stability, and low production cost. For these reasons, great efforts have been made to improve the practical applications of heterogeneous catalysts, and the bimetallic iron–copper materials have become a focus of research. In this context, this review focuses on the compilation of the most relevant studies on the recent progress in the application of bimetallic iron–copper materials in heterogeneous photo–Fenton-like reactions for the degradation of pollutants in wastewater. Special attention is paid to the removal efficiencies obtained and the reaction mechanisms involved in the photo–Fenton treatments with the different catalysts.

Bioremediation of Hazardous Wastes Using Green Synthesis of Nanoparticles

Advanced agronomic methods, urbanisation, and industrial expansion contaminate air, water and soil, globally. Agricultural and industrial activities threaten living biota, causing biodiversity loss and serious diseases. Strategies such as bioremediation and physiochemical remediation have not been effectively beneficial at treating pollutants. Metal-based nanoparticles (NPs) such as copper, zinc, silver, gold, etc., in various nanoformulations and nanocomposites are used more and more as they effectively resist the uptake of toxic compounds via plants by facilitating their immobilisation. According to studies, bio-based NP synthesis is a recent and agroecologically friendly approach for remediating environmental waste, which is effective against carcinogens, heavy metal contamination, treating marine water polluted with excessive concentrations of phosphorus, nitrogen and harmful algae, and hazardous dye- and pesticide-contaminated water. Biogenic resources such as bacteria, fungi, algae and plants are extensively used for the biosynthesis of NPs, particularly metallic NPs. Strategies involving green synthesis of NPs are nontoxic and could be employed for commercial scale production. Here, the focus is on the green synthesis of NPs for reduction of hazardous wastes to help with the clean-up process.

Surface-engineered nanoparticles in cancer immune response and immunotherapy: Current status and future prospects

Cancer immunotherapy is a therapeutic strategy to inhibit tumor growth and metastasis by intervening in the immune response process. Strategies applied to cancer immunotherapy mainly include blocking immune checkpoints, adoptive transfer of engineered immune cells, cytokine therapy, cancer vaccines, and oncolytic virus infection. However, many factors, such as off-target side effects, immunosuppressive cell infiltration and/or upregulation of immune checkpoint expression, cancer cell heterogeneity, and lack of antigen presentation, affect the therapeutic effect of immunotherapy on cancer. To improve the efficacy of targeted immunotherapy and reduce off-target effects, over the past two decades, nanoparticle delivery platforms have been increasingly used in tumor immunotherapy. However, nanoparticles are still subject to biological barriers and biodistribution challenges, which limit their overall clinical potential. This has prompted a series of engineered nanoparticles to overcome specific obstacles and transfer the accumulation of payloads to tumor-infiltrating immune cells. In recent years, new techniques and chemical methods have been employed to modify or functionalize the surfaces of nanoparticles. This review discusses the recent progress of surface-engineered nanoparticles in inducing tumor immune responses and immunotherapy, as well as future directions for the development of next-generation nanomedicines.

Multifunctional Superparticles for Magnetically Targeted NIR-II Imaging and Photodynamic Therapy

Theranostics, the combination of diagnostics and therapies, has been considered as a promising strategy for clinical cancer treatment. Nonetheless, building a smart theranostic system with multifunction for different on-demand applications still remains elusive. Herein, an easy and user-friendly microemulsion based method is developed to modularly assemble upconversion nanoparticles (UCNPs) and Fe₃ O₄ nanoparticles together, forming multifunctional UCNPs/Fe₃ O₄ superparticles with highly integrated functionalities including the 808 nm excitation for real-time NIR-II imaging, magnetic targeting, and the upconversion luminescence upon 980 nm excitation for on-demand photodynamic therapy (PDT). With a magnet placed nearby the tumor, in vivo NIR-II imaging uncovers that superparticles tend to migrate toward the tumor and exhibit intense tumor accumulation, ≈6 folds higher than that without magnetic targeting 2 h after intravenous injection. NIR laser irradiation is then used to trigger PDT, obtaining an outstanding tumor elimination under magnetic tumor targeting, which shows a high potential to be applied in targeted cancer theranostics.

A new copper-supported zinc ferrite as a heterogeneous magnetic nanocatalyst for the synthesis of bis(pyrazolyl)methanes and oxidation of sulfides

In this paper, we report the synthesis of ZnFe₂O₄@SiO₂@APTES@DHBS-Cu as a novel magnetic nanocatalyst, in a mild and green environment. The structure of the described magnetic compound was characterized by different physicochemical techniques including XRD, EDS, AAS, SEM, FT-IR, X-ray elemental mapping, TGA, and VSM analyses. The prepared magnetic nanoparticles exhibit excellent catalytic activity in synthesizing bis (pyrazolyl)methanes and oxidation of sulfide derivatives under green conditions. The heterogeneous nature of the catalyst was confirmed via the hot filtration experiment. Further, ZnFe₂O₄@SiO₂@APTES@DHBS-Cu showed high efficiency and reusability that could be reused for at least five consecutive runs.

Tungsten oxide supported on copper ferrite: a novel magnetic acid heterogeneous catalyst for biodiesel production from low quality feedstock

This study aims to synthesize a WO₃/CuFe₂O₄ catalyst through a wet impregnation method and use it as a new magnetic acid catalyst in the transesterification process of waste cooking oil (WCO). The results of the characterization by XRD, FTIR, SEM, EDS, TG/DTG, VSM and Surface Acidity showed that the obtained bifunctional catalyst has been successfully synthesized. The study of the reaction parameters, such as reaction temperature (140-180 °C), reaction time (1-5 h), molar ratio MeOH : oil (25 : 1-45 : 1) and catalyst loading (2-10% m m^-1) was performed in the conversion of WCO into biodiesel via transesterification. The reactional behavior showed the following optimal reaction conditions: reaction temperature of 180 °C, reaction time of 3 h, molar ratio MeOH : oil of 45 : 1 and catalyst loading of 6%. Based on the results, biodiesel with a maximum ester content of 95.2% was obtained using the WO₃/CuFe₂O₄ magnetic catalyst under the optimal reaction conditions. The magnetic catalyst showed excellent catalytic and magnetic performance and it was applied in five reaction cycles with ester content above 80%. Biodiesel properties were found in accordance with ASTM limits. This research provided the development of a stable and reusable WO₃/CuFe₂O₄ bifunctional catalyst for potential application in biodiesel production.

Positron annihilation and magnetic studies of gamma irradiated nickel ferrite nanoparticles sintered at various temperature

The effects of gamma irradiation on structure and magnetic properties of nickel ferrite nanoparticles, prepared by the sol-gel method and sintered at 300, 500 and 900 °C, are studied through X-ray diffraction, positron annihilation lifetime spectroscopy, coincidence Doppler broadening spectroscopy and vibrating sample magnetometer. The prepared samples were irradiated with gamma rays from ⁶⁰Co, ¹³⁷Cs and ²²Na for 1, 2 and 3 weeks that received 0.47, 0.94 and 1.41 rad dose of radiation. The XRD patterns showed that the prepared and irradiated samples are single phase with cubic spinel structure. The cation distribution, lattice constant, average crystallite size and lattice strain were obtained by the Rietveld refinement of XRD patterns and their variations with irradiation depend on sintering temperature and therefore the particle size. Scanning electron microscopy confirmed formation of nanoparticles. Positron annihilation lifetime and coincidence Doppler broadening measurements showed that for prepared samples with an increase in sintering temperature the size of vacancies increase while their concentrations decrease. It is observed that the effect of gamma radiation on samples depend on sintering temperature or particles size of samples. Also, the type of defects in sample sintered at 300 °C recognized different from samples sintered at 500 and 900 °C. Saturation magnetization and coercivity increased for prepared samples with increase in sintering temperature. The variations of saturation magnetization and coercivity with gamma irradiation for samples sintered at various temperature were different and explained with variation in cation distribution and surrounding environment of vacancies in samples. The measurements showed that samples with more vacancy concentration undergo more cation redistribution due to gamma radiation.

Sol-Gel Synthesis and Characterization of Yttrium-Doped MgFe2O4 Spinel

In this study, an environmentally friendly sol-gel synthetic approach was used for the preparation of yttrium-doped MgFe₂O₄. Two series of compounds with different iron content were synthesized and A-site substitution effects were investigated. In the first series, the iron content was fixed and the charge balance was suggested to be compensated by a partial reduction of Fe³⁺ to Fe²⁺ or formation of interstitial O^2- ions. For the second series of samples, the iron content was reduced in accordance with the substitution level to compensate for the excess of positive charge, which accumulates due to replacing divalent Mg²⁺ with trivalent Y³⁺ ions. Structural, morphological and magnetic properties were inspected. It was observed that single-phase compounds can only form when the substitution level reaches 20 mol% of Y³⁺ ions and iron content is reduced. The coercivity as well as saturation magnetization decreased with the increase in yttrium content. Mössbauer spectroscopy was used to investigate the iron content in both tetrahedral and octahedral positions.

Non-coding RNA in SARS-CoV-2: Progress toward therapeutic significance

The recently developed pathogenic virus, SARS-CoV-2, was found in the Hubei Province, China. Giving rise to a broad spectrum of symptoms, SARS-CoV-2 rapidly spread across the globe, causing multi-systemic and dangerous complications, with death in extreme cases. Thereby, the number of research cases increases every day on preventing infection and treating its resulting damage. Accumulating evidence suggests noncoding RNAs (ncRNAs) are necessary for modifying virus infection and antiviral immune reaction, along with biological processes regulating SARS-CoV-2 and subsequent disease states. Therefore, understanding these mechanisms might provide a further understanding of the pathogenesis and feasible therapy alternatives against SARS-CoV2. Consequently, the molecular biology of SARS-CoV-2, ncRNA's role in its infection, and various RNA therapy tactics against the virus have been presented in this review section.

Progress in the Preparation and Modification of Zinc Ferrites Used for the Photocatalytic Degradation of Organic Pollutants

Zinc ferrite is a type of photocatalytic material with high physicochemical stability, narrow band gap, high carrier separation efficiency, high porosity, and paramagnetism, which makes it easy to recover. Thus, zinc ferrite is widely used as a photocatalyst in water treatment. In this paper, the preparation principles as well as the advantages and disadvantages of typical methods used to prepare zinc ferrite including hydrothermal, co-precipitation, sol-gel, and other novel methods such as biosynthesis have been summarized. Modification methods such as elemental doping, composite formation, and morphological modification have been highlighted. Using these modification methods, the catalytic activity of zinc ferrite toward the photocatalytic degradation of organic pollutants in water has been enhanced. Biosynthesis is regarded as a promising preparation method that uses biological materials instead of chemical materials to achieve the large-scale preparation of zinc ferrite using low cost, energy efficient, and environmentally friendly processes. Meanwhile, the combination of multiple modification techniques to enhance the photocatalytic performance of zinc ferrite will be an important research trend in the future.

Impact of Ga3+ Ions on the Structure, Magnetic, and Optical Features of Co-Ni Nanostructured Spinel Ferrite Microspheres

Co-Ni ferrite is one of the crucial materials for the electronic industry. A partial substitution with a rare-earth metal brings about modification in crystal lattice and broadens knowledge in the discovery of new magnetic material. Current work reports a Ga³⁺ substitution in the Co-Ni ferrite with composition Co_0.5Ni_0.5Fe_2-xGa_xO₄ (where x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0), herein referred to as spinel ferrite microspheres (CoNiGa-SFMCs). The samples were crystallized hydrothermally showing a hollow sphere morphology. The crystal phase, magnetic, morphology, and optical behaviour were examined using various microscopy and spectroscopic tools. While the XRD confirmed the phase of SFMCs, the crystallite size varied between 9 and 12 nm. The Tauc plot obtained from DRS (diffuse reflectance spectroscopy) shows the direct optical energy bandgap (E_g) of the products, with the pristine reading having the value of 1.41 eV E_g; the band gap increased almost linearly up to 1.62 eV along with rising the Ga³⁺ amount. The magnetic features, on the other hand, indicated the decrease in coercivity (H_c) as more Ga³⁺ is introduced. Moreover, there was a gradual increase in both saturation magnetization (M_s) and magnetic moment (nB) with increasing amount of Ga³⁺ till x = 0.6 and then a progressive decline with increases in the x content; this was ascribed to the spin-glass-like behavior at low temperatures. It was detected that magnetic properties correlate well with crystallite/particle size, cation distribution, and anisotropy.

Biocompatibility and colorectal anti-cancer activity study of nanosized BaTiO3 coated spinel ferrites

In the present work, different nanoparticles spinel ferrite series (MFe2O4, Co0.5M0.5Fe2O4; M = Co, Mn, Ni, Mg, Cu, or Zn) have been obtained via sonochemical approach. Then, sol-gel method was employed to design core-shell magnetoelectric nanocomposites by coating these nanoparticles with BaTiO3 (BTO). The structure and morphology of the prepared samples were examined by X-ray powder diffraction (XRD), scanning electron microscope (SEM) coupled with energy dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscope (HR-TEM), and zeta potential. XRD analysis showed the presence of spinel ferrite and BTO phases without any trace of a secondary phase. Both phases crystallized in the cubic structure. SEM micrographs illustrated an agglomeration of spherical grains with nonuniformly diphase orientation and different degrees of agglomeration. Moreover, HR-TEM revealed interplanar d-spacing planes that are in good agreement with those of the spinel ferrite phase and BTO phase. These techniques along with EDX analyses confirmed the successful formation of the desired nanocomposites. Zeta potential was also investigated. The biological influence of (MFe2O4, CoMFe) MNPs and core-shell (MFe2O4@BTO, CoMFe@BTO) magnetoelectric nanocomposites were examined by MTT and DAPI assays. Post 48 h of treatments, the anticancer activity of MNPs and MENCs was investigated on human colorectal carcinoma cells (HCT-116) against the cytocompatibility of normal non-cancerous cells (HEK-293). It was established that MNPs possess anti-colon cancer capability while MENCs exhibited a recovery effect due to the presence of a protective biocompatible BTO layer. RBCs hemolytic effect of NPs has ranged from non- to low-hemolytic effect. This effect that could be attributed to the surface charge from zeta potential, also the CoMnFe possesses the stable and lowest zeta potential in comparison with CoFe2O4 and MnFe2O4 also to the protective effect of shell. These findings open up wide prospects for biomedical applications of MNPs as anticancer and MENCs as promising drug nanocarriers.

Exposure to Polystyrene nanoparticles induces liver damage in rat via induction of oxidative stress and hepatocyte apoptosis

Plastic products are widely used in different applications. Thus, exposure of human and other organisms to these products may affect their biological system. The current study was conducted to investigate the potential deleterious effect of Polysterene nanoparticles (PS-NPs) on the liver and to state the cellular and molecular mechanisms associated with exposure to PS-NPs.30 male rats were divided randomly and equally into 3 groups; control (distilled water), low dose (3 mg/kg/day) and high dose (10 mg/kg/day) exposed group via oral gavage for 5 successive weeks. PS-NPs caused elevation in ALT, AST and MDA, upregulation of apoptosis-related genes and significant decrease in GSH and mRNA expression for antioxidant-related genes (Nrf-2 and GPx). Moreover, alterations in hepatic tissue architecture and positive caspase-3 expression was noticed in a dose- dependent manner. Collectively, PS-NPs can induce hepatoxicity in rats in a dose dependent manner, so the health risk of PS-NPs should not be ignored.