Detailed computational analysis of flow dynamics in an extended respiratory airway model

Comparison of the upper and lower airway microbiome in early postoperative lung transplant recipients

The upper and lower respiratory tract may share microbiome because they are directly continuous, and the nasal microbiome contributes partially to the composition of the lung microbiome. But little is known about the upper and lower airway microbiome of early postoperative lung transplant recipients (LTRs). Using 16S rRNA gene sequencing, we compared paired nasal swab (NS) and bronchoalveolar lavage fluid (BALF) microbiome from 17 early postoperative LTRs. The microbiome between the two compartments were significantly different in Shannon diversity and beta diversity. Four and eight core NS-associated and BALF-associated microbiome were identified, respectively. NS samples harbored more Corynebacterium, Acinetobacter, and Pseudomonas, while BALF contained more Ralstonia, Stenotrophomonas, Enterococcus, and Pedobacter. The within-subject dissimilarity was higher than the between-subject dissimilarity, indicating a greater impact of sampling sites than sampling individuals on microbial difference. There were both difference and homogeneity between NS and BALF microbiome in early postoperative LTRs. High levels of pathogens were detected in both samples, suggesting that both of them can reflect the diseases characteristics of transplanted lung. The differences between upper and lower airway microbiome mainly come from sampling sites instead of sampling individuals.

IMPORTANCE

Lung transplantation is the only therapeutic option for patients with end-stage lung disease, but its outcome is much worse than other solid organ transplants. Little is known about the NS and BALF microbiome of early postoperative LTRs. Here, we compared paired samples of the nasal and lung microbiome from 17 early postoperative LTRs and showed both difference and homogeneity between the two samples. Most of the "core" microbiome in both NS and BALF samples were recognized respiratory pathogens, suggesting that both samples can reflect the diseases characteristics of transplanted lung. We also found that the differences between upper and lower airway microbiome in early postoperative LTRs mainly come from sampling sites instead of sampling individuals.

A quasi-realistic computational model development and flow field study of the human upper and central airways

The impact of drug delivery and particulate matter exposure on the human respiratory tract is influenced by various anatomical and physiological factors, particularly the structure of the respiratory tract and its fluid dynamics. This study employs computational fluid dynamics (CFD) to investigate airflow in two 3D models of the human air conducting zone. The first model uses a combination of CT-scan images and geometrical data from human cadaver to extract the upper and central airways down to the ninth generation, while the second model develops the lung airways from the first Carina to the end of the ninth generation using Kitaoka's deterministic algorithm. The study examines the differences in geometrical characteristics, airflow rates, velocity, Reynolds number, and pressure drops of both models in the inhalation and exhalation phases for different lobes and generations of the airways. From trachea to the ninth generation, the average air flowrates and Reynolds numbers exponentially decay in both models during inhalation and exhalation. The steady drop is the case for the average air velocity in Kitaoka's model, while that experiences a maximum in the 3rd or 4th generation in the quasi-realistic model. Besides, it is shown that the flow field remains laminar in the upper and central airways up to the total flow rate of 15 l/min. The results of this work can contribute to the understanding of flow behavior in upper respiratory tract.

Assessing airflow unsteadiness in the human respiratory tract under different expiration conditions

To enhance the understanding of airflow characteristics in the human respiratory system, the expiratory airflow in a human respiratory tract model was simulated using large eddy simulation and dynamic mesh under different expiration conditions aligned with clinically measured data. The airflow unsteadiness was quantitatively assessed using power spectral density (PSD) and spectral entropy (SE). The following findings were obtained: (1) The airflow is highly turbulent in the mouth-pharynx region during expiration, with its dynamic characteristics being influenced by both the transient expiration flow pattern at mouth piece and the glottis motion. (2) PSD analysis reveals that the expiratory airflow is very unsteady, exhibiting a broad-band attenuation spectrum in the pharynx-trachea region. When only transient expiration or glottis motion is considered, the PSD spectrum changes slightly. When both are ignored, however, the change is significant, with the peak frequency reduced to 10% of the real expiration condition. (3) SE analysis indicates that the airflow transitions into turbulence in the trachea, and there may be multiple transitions in the region of soft palate. The transient expiration or glottis motion alone increases turbulence intensity by 2%-15%, while ignoring both reduces turbulence intensity by 10%-20%. This study implies that turbulence characteristics can be significantly different under different expiratory conditions, and therefore it is necessary to determine the expiratory flow characteristics using clinically measured expiratory data.

Development of multi-generation lower respiratory tract model and insights into the transport and deposition characteristics of inhalable particles

Airborne particles can spread quickly and enter human respiratory system via inhalation, causing chronic diseases, even cancer. Although recent studies have informed of toxicity of various pollutants, understanding the transport and deposition characteristics of particles in lower respiratory tract is still challenging. The current study proposes a novel model to simulate flow field change from the entrance of lower respiratory tract to pulmonary acinus, while studying particle transport and deposition characteristics. This model for lower respiratory tract with several bronchial extensions containing virtual pulmonary acinus is calculated using computational fluid dynamics and dynamics mesh. The results showed that in the first 10 generations of the lower respiratory tract, vortices and gravity interfered with particles' trajectory, affecting particle deposition distribution. For the first to the tenth-generation respiratory tract, coarse particles were deposited throughout almost the whole respiratory tract model. In contrast, ultrafine particles did not deposit in the higher-generation respiratory tract. The particle enrichment ability of various lobes was uneven with three particle deposition fraction variation patterns. Virtual pulmonary acinus influenced particle deposition and distribution because of vortex ring's trapped ability during expansion and contraction. This new attempt to build a virtual pulmonary acinus model to simulate particle deposition effects in human respiratory system may provide a reference for studying the toxicities of inhalable particles in the exposed human body.

The impact of actuator nozzle and surroundings condition on drug delivery using pressurized-metered dose inhalers

The most commonly used method to deliver aerosolized drugs to the lung is with pressurized metered-dose inhalers (pMDIs). The spray actuator is a critical component of pMDI, since it controls the atomization process by forming aerosol plumes and determining droplet size distribution. Through computational fluid dynamics (CFD) simulations, this study investigated the effect of two different nozzle types (single conventional and twin nozzles) on drug deposition in the mouth-throat (MT) region. We also studied the behavior of aerosol plumes in both an open-air environment and the MT geometry. Our study revealed that spray aerosol generated in an unconfined, open-air environment with no airflow behaves distinctly from spray introduced into the MT geometry in the presence of airflow. In addition, the actuator structure significantly impacts the device's efficacy. In the real MT model, we found that the twin nozzle increases drug deposition in the MT region, and its higher aerosol velocity negatively affects its efficiency.

Influence of Pulsatility and Inflow Waveforms on Tracheal Airflow Dynamics in Healthy Older Adults

Tracheal collapsibility is a dynamic process altering local airflow dynamics. Patient-specific simulation is a powerful technique to explore the physiological and pathological characteristics of human airways. One of the key considerations in implementing airway computations is choosing the right inlet boundary conditions that can act as a surrogate model for understanding realistic airflow simulations. To this end, we numerically examine airflow patterns under the influence of different profiles, i.e., flat, parabolic, and Womersley, and compare these with a realistic inlet obtained from experiments. Simulations are performed in ten patient-specific cases with normal and rapid breathing rates during the inhalation phase of the respiration cycle. At normal breathing, velocity and vorticity contours reveal primary flow structures on the sagittal plane that impart strength to cross-plane vortices. Rapid breathing, however, encounters small recirculation zones. Quantitative flow metrics are evaluated using time-averaged wall shear stress (TAWSS) and oscillatory shear index (OSI). Overall, the flow metrics encountered in a real velocity profile are in close agreement with parabolic and Womersley profiles for normal conditions, however, the Womersley inlet alone conforms to a realistic profile under rapid breathing conditions.

Total and regional microfiber transport characterization in a 15th - Generation human respiratory airway

Fiber transport and deposition in the complete respiratory airway is of great significance for human health risk assessment. Thus far, the literature has mainly focused on limited branches of the upper airway and assumes spherical particles by neglecting fiber anisotropy. To fill the gap, this paper utilized an extended realistic respiratory airway from the nasal cavity to the distal bronchial tracts, up to the 15th generation. Fibers with aerodynamic diameters from 2 to 12 μm and aspect ratios of 1, 10, and 50 were released at the inlet of the respiratory airway model, and the coupled translational and rotational motion were computed. Overall and regional fiber deposition fractions, including the nasal cavities, laryngeal airway, and lungs were predicted and compared with earlier numerical results. The study also investigated: 1) secondary flow and distributions of the fibers at the lower respiratory airway entrance; 2) upstream conditions toward fiber deposition efficiencies; 3) fiber deposition patterns and detailed deposition fractions in the five lobes. Utilizing the realistic fiber transport model, the current study found that the upstream airway geometry and the flow condition have a significant impact on the fiber transport and deposition in the downstream airway regions. The fiber depositions in the lower and middle lobes are sensitive to the fiber aerodynamic diameter, but insensitive in the upper lobes. This study expects to generate innovative knowledge on the unique fiber motion characteristics toward potential inhalation health risks.

Airflow through the supraglottis during inspiration

Exercise-induced laryngeal obstruction is a paradoxical laryngeal closure during inspiration at high-intensity exercise, with supraglottic closure being most common. This study develops a model based on the computational fluid dynamics to investigate airflow velocity and pressure and the air-induced loads on the supraglottis at various inspiratory flow rates. It is found that at high flow rates, positive wall pressure is formed in the hypopharynx localise towards its lower region, while posterior supraglottic wall pressures shift from positive to negative. These findings suggest that high inspiratory flow rates may increase supraglottic pressure differentials, ultimately contributing in the collapse.

In vitro-in silico correlation of three-dimensional turbulent flows in an idealized mouth-throat model

There exists an ongoing need to improve the validity and accuracy of computational fluid dynamics (CFD) simulations of turbulent airflows in the extra-thoracic and upper airways. Yet, a knowledge gap remains in providing experimentally-resolved 3D flow benchmarks with sufficient data density and completeness for useful comparison with widely-employed numerical schemes. Motivated by such shortcomings, the present work details to the best of our knowledge the first attempt to deliver in vitro-in silico correlations of 3D respiratory airflows in a generalized mouth-throat model and thereby assess the performance of Large Eddy Simulations (LES) and Reynolds-Averaged Numerical Simulations (RANS). Numerical predictions are compared against 3D volumetric flow measurements using Tomographic Particle Image Velocimetry (TPIV) at three steady inhalation flowrates varying from shallow to deep inhalation conditions. We find that a RANS k-ω SST model adequately predicts velocity flow patterns for Reynolds numbers spanning 1'500 to 7'000, supporting results in close proximity to a more computationally-expensive LES model. Yet, RANS significantly underestimates turbulent kinetic energy (TKE), thus underlining the advantages of LES as a higher-order turbulence modeling scheme. In an effort to bridge future endevours across respiratory research disciplines, we provide end users with the present in vitro-in silico correlation data for improved predictive CFD models towards inhalation therapy and therapeutic or toxic dosimetry endpoints.

Numerical and Experimental Analysis of Drug Inhalation in Realistic Human Upper Airway Model

The demand for a more efficient and targeted method for intranasal drug delivery has led to sophisticated device design, delivery methods, and aerosol properties. Due to the complex nasal geometry and measurement limitations, numerical modeling is an appropriate approach to simulate the airflow, aerosol dispersion, and deposition for the initial assessment of novel methodologies for better drug delivery. In this study, a CT-based, 3D-printed model of a realistic nasal airway was reconstructed, and airflow pressure, velocity, turbulent kinetic energy (TKE), and aerosol deposition patterns were simultaneously investigated. Different inhalation flowrates (5, 10, 15, 30, and 45 L/min) and aerosol sizes (1, 1.5, 2.5, 3, 6, 15, and 30 µm) were simulated using laminar and SST viscous models, with the results compared and verified by experimental data. The results revealed that from the vestibule to the nasopharynx, the pressure drop was negligible for flow rates of 5, 10, and 15 L/min, while for flow rates of 30 and 40 L/min, a considerable pressure drop was observed by approximately 14 and 10%, respectively. However, from the nasopharynx and trachea, this reduction was approximately 70%. The aerosol deposition fraction alongside the nasal cavities and upper airway showed a significant difference in pattern, dependent on particle size. More than 90% of the initiated particles were deposited in the anterior region, while just under 20% of the injected ultrafine particles were deposited in this area. The turbulent and laminar models showed slightly different values for the deposition fraction and efficiency of drug delivery for ultrafine particles (about 5%); however, the deposition pattern for ultrafine particles was very different.

Simulating the effect of individual upper airway anatomical features on drug deposition

This study aims to systematically isolate different anatomical features of the human pharynx with the goal to investigate their independent influence on airflow dynamics and particle deposition characteristics in a geometrically realistic human airway. Specifically, the effects of the uvula, epiglottis and soft palate on drug particle deposition are studied systematically, by carefully removing each of these anatomical features from reconstructed models based on MRI data and comparing them to a benchmark realistic airway model. Computational Fluid Dynamics using established turbulence models is employed to simulate the transport of mono-dispersed particles (3 µm) in the airway at two flow-rates. The simulations suggest three findings: 1) widening the space between the oral cavity and oropharynx and where the soft palate is situated leads to the most dramatic reduction in drug deposition in the upper airway; 2) exclusion of the uvula and epiglottis: a) affects flow dynamics in the airway; b) alters regional deposition behaviour; c) does not significantly affect the total number of particles deposited in the pharynx; and 3) the space adjacent to the soft palate is a key determinant for aerosol deposition in the extrathoracic region and is related to mechanisms of flow acceleration, diversion and recirculation.

CFD Simulations of Respiratory Airflow in Human Upper Airways Response to Walking and Running for Oral Breathing Condition

Walking and running are common types of physical activities that people do in day to day living, to improve health and physical fitness or for recreation. During a physical activity, rate and depth of breathing increase because working muscles need extra oxygen in order to produce energy. In this study, computational fluid dynamics (CFD) simulations were used to investigate respiratory airflow dynamics in human upper airways response to walking and running for oral breathing. The numerical simulations were done in a realistic CT-scan airway model using ANAYS Fluent 19.0 software. Flow fields were analysed numerically and flow patterns were investigated in the airway model during inspiration and expiration response to walking and running. The axial velocity distributions and secondary flow patterns for the two respiratory phases were analysed response to the two physical activities at different cross-sections of the airway model. The maximum velocity, wall pressure and wall shear stress values for running were respectively 3.2, 9.4 and 5.9 times higher than that of walking during inspiration. The mixing of flow streamlines was observed to be higher during running than walking because of more significant turbulence. More skewed flows at airway curvatures were observed at inspiration than expiration. The results of this study supported the fact that running is a more intense activity than walking from a respiratory dynamics point of view.

What is the impact of distraction osteogenesis on the upper airway of hemifacial microsomia patient with obstructive sleep apnea: a case report

BACKGROUND

Current research about hemifacial microsomia (HFM) patients after distraction osteogenesis (DO) most emphasize the morphologic changes. This case report shows the outcome of DO on the upper airway of a HFM patient with obstructive sleep apnea (OSA) based on the use of computational fluid dynamics (CFD).

CASE PRESENTATION

An 11-year-old boy was diagnosed as HFM with OSA, and underwent unilateral DO. Polysomnography and CT scans were performed before and 6 months after treatment. After DO, lowest blood oxygen saturation increased from 81% to 95% and apnea and hypopnea index decreased from 6.4 events/hour to 1.2 events/hour. The oropharynx and nasopharynx were obviously expanded. We observed apparently increased average pressure, decreased average velocity and pressure drop in all cross-sections, and largely decreased airflow resistance and maximum velocity entirely in the airway.

CONCLUSIONS

The results suggest that DO might be effective for the treatment of OSA by expanding the upper airway and reducing the resistance of inspiration.

Deposition features of inhaled viral droplets may lead to rapid secondary transmission of COVID-19

Inhaled viral droplets may immediately be expelled and cause an escalating re-transmission. Differences in the deposition location of inhaled viral droplets may have a direct impact on the probability of virus expelling. This study develops a numerical model to estimate the region-specific deposition fractions for inhalable droplets (1-50 μ m) in respiratory airways. The results identified a higher deposition fraction in the upper airways than the lower airways. Particularly for droplets larger than 10 μ m, the relatively high deposition fraction in the oral/laryngeal combined region warns of its easy transmission through casual talking/coughing. Moreover, considering droplet sizes' effect on virus loading capacity, we built a correlation model to quantify the potential of virus expelling hazards, which suggests an amplified cascade effect on virus transmission on top of the existing transmission mechanism. It therefore highlights the importance of considering the instant expelling possibilities from inhaled droplets, and also implies potentials in restricting a rapid secondary transmission by measures that can lower down droplet deposition in the upper airways.

Role of CFD based in silico modelling in establishing an in vitro-in vivo correlation of aerosol deposition in the respiratory tract

Effective evaluation and prediction of aerosol transport deposition in the human respiratory tracts are critical to aerosol drug delivery and evaluation of inhalation products. Establishment of an in vitro-in vivo correlation (IVIVC) requires the understanding of flow and aerosol behaviour and underlying mechanisms at the microscopic scale. The achievement of the aim can be facilitated via computational fluid dynamics (CFD) based in silico modelling which treats the aerosol delivery as a two-phase flow. CFD modelling research, in particular coupling with discrete phase model (DPM) and discrete element method (DEM) approaches, has been rapidly developed in the past two decades. This paper reviews the recent development in this area. The paper covers the following aspects: geometric models of the respiratory tract, CFD turbulence models for gas phase and its coupling with DPM/DEM for aerosols, and CFD investigation of the effects of key factors associated with geometric variations, flow and powder characteristics. The review showed that in silico study based on CFD models can effectively evaluate and predict aerosol deposition pattern in human respiratory tracts. The review concludes with recommendations on future research to improve in silico prediction to achieve better IVIVC.

A dynamical overview of droplets in the transmission of respiratory infectious diseases

The outbreak of the coronavirus disease has drawn public attention to the transmission of infectious pathogens, and as major carriers of those pathogens, respiratory droplets play an important role in the process of transmission. This Review describes respiratory droplets from a physical and mechanical perspective, especially their correlation with the transmission of infectious pathogens. It covers the important aspects of (i) the generation and expulsion of droplets during respiratory activities, (ii) the transport and evolution of respiratory droplets in the ambient environment, and (iii) the inhalation and deposition of droplets in the human respiratory tract. State-of-the-art experimental, computational, and theoretical models and results are presented, and the corresponding knowledge gaps are identified. This Review stresses the multidisciplinary nature of its subject and appeals for collaboration among different fields to fight the present pandemic.

Transport and deposition of ultrafine particles in the upper tracheobronchial tree: a comparative study between approximate and realistic respiratory tract models

This paper presents a computational fluid dynamics (CFD) study of air-particle flows in the upper tracheobronchial tree. Two respiratory tract models, including a parametrically controlled approximate airway model developed by Kitaoka (KG model) and a CT-based patient specific airway (realistic model) were used. Assuming laminar, quasi-steady, three-dimensional air flow and spherical non-interacting ultrafine particles in sequentially bifurcating rigid bronchial airways, airflow patterns and particle transport/deposition in these two airway models were evaluated and compared. Overall deposition efficiency data was compared with the widely adopted ICRP data published by The International Commission on Radiological Protection. Good deposition efficiency agreements were observed between the present respiratory tract models and the ICRP data, which validated the numerical prediction accuracy of the present computational fluid-particle dynamics (CFPD) model. For the two respiratory models, the comparison showed both difference and similarity between the approximate KG model and the realistic model. Specifically, the realistic model showed more complicated airflow patterns due to the increased surface irregularity. The deposition efficiency data revealed a deposition preference in the first-generation airways compared to the rest regions. For ultrafine particles smaller than 10 nm, Brownian diffusion remains the dominant particle deposition mechanism. However, for ultrafine particles with size ranging from 10 nm to 100 nm, the deposition efficiency decreased dramatically with the 100 nm particles approaching to zero deposition in the present bronchial tree scope. The generation-by-generation deposition data presented in this paper is indispensable to the formulation of new lung inhalation exposure models.

Computational fluid dynamics modelling of human upper airway: A review

BACKGROUND AND OBJECTIVE

Human upper airway (HUA) has been widely investigated by many researchers covering various aspects, such as the effects of geometrical parameters on the pressure, velocity and airflow characteristics. Clinically significant obstruction can develop anywhere throughout the upper airway, leading to asphyxia and death; this is where recognition and treatment are essential and lifesaving. The availability of advanced computer, either hardware or software, and rapid development in numerical method have encouraged researchers to simulate the airflow characteristics and properties of HUA by using various patient conditions at different ranges of geometry and operating conditions. Computational fluid dynamics (CFD) has emerged as an efficient alternative tool to understand the airflow of HUA and in preparing patients to undergo surgery. The main objective of this article is to review the literature that deals with the CFD approach and modeling in analyzing HUA.

METHODS

This review article discusses the experimental and computational methods in the study of HUA. The discussion includes computational fluid dynamics approach and steps involved in the modeling used to investigate the flow characteristics of HUA. From inception to May 2020, databases of PubMed, Embase, Scopus, the Cochrane Library, BioMed Central, and Web of Science have been utilized to conduct a thorough investigation of the literature. There had been no language restrictions in publication and study design of the database searches. A total of 117 articles relevant to the topic under investigation were thoroughly and critically reviewed to give a clear information about the subject. The article summarizes the review in the form of method of studying the HUA, CFD approach in HUA, and the application of CFD for predicting HUA obstacle, including the type of CFD commercial software are used in this research area.

RESULTS

This review found that the human upper airway was well studied through the application of computational fluid dynamics, which had considerably enhanced the understanding of flow in HUA. In addition, it assisted in making strategic and reasonable decision regarding the adoption of treatment methods in clinical settings. The literature suggests that most studies were related to HUA simulation that considerably focused on the aspects of fluid dynamics. However, there is a literature gap in obtaining information on the effects of fluid-structure interaction (FSI). The application of FSI in HUA is still limited in the literature; as such, this could be a potential area for future researchers. Furthermore, majority of researchers present the findings of their work through the mechanism of airflow, such as that of velocity, pressure, and shear stress. This includes the use of Navier-Stokes equation via CFD to help visualize the actual mechanism of the airflow. The above-mentioned technique expresses the turbulent kinetic energy (TKE) in its result to demonstrate the real mechanism of the airflow. Apart from that, key result such as wall shear stress (WSS) can be revealed via turbulent kinetic energy (TKE) and turbulent energy dissipation (TED), where it can be suggestive of wall injury and collapsibility tissue to the HUA.

Investigation of airflow at different activity conditions in a realistic model of human upper respiratory tract

In the present study, the turbulent flows inside a realistic model of the upper respiratory tract were investigated numerically and experimentally. The airway model included the geometrical details of the oral cavity to the end of the trachea that was based on a series of CT-scan images. The topological data of the respiratory tract were used for generating the computational model as well as the 3D-printed model that was used in the experimental pressure drop measurement. Different airflow rates of 30, 45, and 60 L/min, which correspond to the light, semi-light, and heavy activity breathing conditions, were investigated numerically using turbulence and transition models, as well as experimentally. Simulation results for airflow properties, including velocity vectors, pressure drops, streamlines, eddy viscosity, and turbulent kinetic energy contours in the oral-trachea airway model, were presented. The simulated pressure drop was compared with the experimental data, and reasonable agreement was found. The obtained results showed that the maximum pressure drop occurs in the narrowest part of the larynx region. A comparison between the numerical results and experimental data showed that the transition (γ-Reθ) SST model predicts higher pressure losses, especially at higher breathing rates. Formations of the secondary flows in the oropharynx and trachea regions were also observed. In addition, the simulation results showed that in the trachea region, the secondary flow structures dissipated faster for the flow rate of 60 L/min compared to the lower breathing rates of 30 and 45 L/min.

Investigation of inhalation and exhalation flow pattern in a realistic human upper airway model by PIV experiments and CFD simulations

In this study, flow field characteristics in the trachea region in a realistic human upper airway model were firstly measured by particle image velocimetry (PIV) in the air under three constant inhalation and exhalation conditions: 36 L/min, 64 L/min and 90 L/min, representing flow rates of 18 L/min, 32 L/min and 45 L/min in real human airway (the model was twice the size of a human airway). Computational fluid dynamics (CFD) analyses were performed on four turbulence models, with boundary conditions corresponding to the PIV experiments. The effects of flow rates and breathing modes on the airflow patterns were investigated. The CFD prediction results were compared with the PIV measurements and showed relatively good agreement in all cases. During inhalation, the higher the flow rates, the less significant the "glottal jet" phenomenon, and the smaller the area of the separation zone. The air in the nasal inhalation condition accelerated more dramatically after glottis. The SST-Transition model was the best choice for predicting inhalation velocity profiles. For exhalation condition, the maximum velocity was much smaller than that during inhalation due to the more uniform flow field. The exhalation flow rates and breathing modes had little effect on the flow characteristics in the trachea region. The RNG k - ε model and SST k - ω model were recommended to simulate the flow field in the respiratory tract during exhalation.

Prediction of Aerosol Deposition in the Human Respiratory Tract via Computational Models: A Review with Recent Updates

The measurement of deposited aerosol particles in the respiratory tract via in vivo and in vitro approaches is difficult due to those approaches’ many limitations. In order to overcome these obstacles, different computational models have been developed to predict the deposition of aerosol particles inside the lung. Recently, some remarkable models have been developed based on conventional semi-empirical models, one-dimensional whole-lung models, three-dimensional computational fluid dynamics models, and artificial neural networks for the prediction of aerosol-particle deposition with a high accuracy relative to experimental data. However, these models still have some disadvantages that should be overcome shortly. In this paper, we take a closer look at the current research trends as well as the future directions of this research area.

A review of fluid-structure interaction simulation for patients with sleep related breathing disorders with obstructive sleep

Obstructive sleep apnea is one of the most common breathing disorders. Undiagnosed sleep apnea is a hidden health crisis to the patient and it could raise the risk of heart diseases, high blood pressure, depression and diabetes. The throat muscle (i.e., tongue and soft palate) relax narrows the airway and causes the blockage of the airway in breathing. To understand this phenomenon computational fluid dynamics method has emerged as a handy tool to conduct the modeling and analysis of airflow characteristics. The comprehensive fluid-structure interaction method provides the realistic visualization of the airflow and interaction with the throat muscle. Thus, this paper reviews the scientific work related to the fluid-structure interaction (FSI) for the evaluation of obstructive sleep apnea, using computational techniques. In total 102 articles were analyzed, each article was evaluated based on the elements related with fluid-structure interaction of sleep apnea via computational techniques. In this review, the significance of FSI for the evaluation of obstructive sleep apnea has been critically examined. Then the flow properties, boundary conditions and validation of the model are given due consideration to present a broad perspective of CFD being applied to study sleep apnea. Finally, the challenges of FSI simulation methods are also highlighted in this article.

Ultrafine particle deposition in a realistic human airway at multiple inhalation scenarios

The scarcity of regional deposition data in distal respiratory airways represents an important challenge for current toxicology and pharmacology research. To bridge this gap, a realistic airway model extending from nasal and oral openings to distal bronchial airways with varying pathway length was built in this study. Transport and deposition characteristics of naturally inhaled ultrafine particles (UFPs) ranging from 1 to 100 nm were numerically investigated, and effects of different inhalation scenarios were considered. To enable intercase particle deposition comparison, an adjusted parameter, unified deposition enhancement factor (UDEF), was proposed for quantifying the localised deposition concentration. Results show that compartment particle deposition peaked around the ultrafine end of the considered size range, and it dropped rapidly with the increase of particle size. Different inhalation modes caused notable deposition changes in the extrathoracic region, while its effects in the TB airway are much less. For UFPs larger than 10 nm, predicted deposition efficiencies in all compartments are all at lowest levels among considered particle size range, implying UFPs ranging from 10 to 100 nm can travel through the whole respiratory airway model and escape to the alveolar region. Furthermore, high enhancement factors were observed at the vicinity of most bifurcation apexes, and more even UDEF distribution was observed from 1-nm particle cases. While for 100-nm cases, the deposited particles tend to concentrate at few "hot spots" (areas of high deposition concentration in relation to surrounding surfaces) with greater UDEF in the tracheobronchial airway.