Metal-organic framework adsorbents and membranes for separation applications

Enhancement strategies of poly(ether-block-amide) copolymer membranes for CO2 separation: A review

Poly(ether-block-amide) (Pebax) membranes have become the preferred CO2 separation membrane because of their excellent CO2 affinity and robust mechanical resistance. Nevertheless, their development must be considered to overcome the typical obstacles in polymeric membranes, including the perm-selectivity trade-off, plasticization, and physical aging. This article discusses the recent enhancement strategies as a guideline for designing and developing Pebax membranes. Five strategies were developed in the past few years to improve Pebax gas transport properties, including crosslinking, mobile carrier attachment, polymer blending, filler incorporation, and the hybrid technique. Among them, filler incorporation and the hybrid technique were most favorable for boosting CO2/N2 and CO2/CH4 separation performance with a trade-off-free profile. On the other hand, modified Pebax membranes must deal with two latent issues, mechanical strength loss, and perm-selectivity off-balance. Therefore, exploring novel materials with unique structures and surface properties will be promising for further research. In addition, seeking eco-friendly additives has become worthwhile for establishing Pebax membrane sustainable development for gas separation.

(Fe-Co-Ni-Zn)-Based Metal-Organic Framework-Derived Electrocatalyst for Zinc-Air Batteries

Zinc-air batteries (ZABs) have garnered significant interest as a viable substitute for lithium-ion batteries (LIBs), primarily due to their impressive energy density and low cost. However, the efficacy of zinc-air batteries is heavily dependent on electrocatalysts, which play a vital role in enhancing reaction efficiency and stability. This scholarly review article highlights the crucial significance of electrocatalysts in zinc-air batteries and explores the rationale behind employing Fe-Co-Ni-Zn-based metal-organic framework (MOF)-derived hybrid materials as potential electrocatalysts. These MOF-derived electrocatalysts offer advantages such as abundancy, high catalytic activity, tunability, and structural stability. Various synthesis methods and characterization techniques are employed to optimize the properties of MOF-derived electrocatalysts. Such electrocatalysts exhibit excellent catalytic activity, stability, and selectivity, making them suitable for applications in ZABs. Furthermore, they demonstrate notable capabilities in the realm of ZABs, encompassing elevated energy density, efficacy, and prolonged longevity. It is imperative to continue extensively researching and developing this area to propel the advancement of ZAB technology forward and pave the way for its practical implementation across diverse fields.

Zeolites and metal-organic frameworks for gas separation: the possibility of translating adsorbents into membranes

Zeolites and metal-organic frameworks (MOFs) represent an attractive class of crystalline porous materials that possesses regular pore structures. The inherent porosity of these materials has led to an increasing focus on gas separation applications, encompassing adsorption and membrane separation techniques. Here, a brief overview of the critical properties and fabrication approaches for zeolites and MOFs as adsorbents and membranes is given. The separation mechanisms, based on pore sizes and the chemical properties of nanochannels, are explored in depth, considering the distinct characteristics of adsorption and membrane separation. Recommendations for judicious selection and design of zeolites and MOFs for gas separation purposes are emphasized. By examining the similarities and differences between the roles of nanoporous materials as adsorbents and membranes, the feasibility of zeolites and MOFs from adsorption separation to membrane separation is discussed. With the rapid development of zeolites and MOFs towards adsorption and membrane separation, challenges and perspectives of this cutting-edge area are also addressed.

Aliquots of MIL-140 and Graphene in Smart PNIPAM Mixed Hydrogels: A Nanoenvironment for a More Eco-Friendly Treatment of NaCl and Humic Acid Mixtures by Membrane Distillation

The problem of water scarcity is already serious and risks becoming dramatic in terms of human health as well as environmental safety. Recovery of freshwater by means of eco-friendly technologies is an urgent matter. Membrane distillation (MD) is an accredited green operation for water purification, but a viable and sustainable solution to the problem needs to be concerned with every step of the process, including managed amounts of materials, membrane fabrication procedures, and cleaning practices. Once it is established that MD technology is sustainable, a good strategy would also be concerned with the choice of managing low amounts of functional materials for membrane manufacturing. These materials are to be rearranged in interfaces so as to generate nanoenvironments wherein local events, conceived to be crucial for the success and sustainability of the separation, can take place without endangering the ecosystem. In this work, discrete and random supramolecular complexes based on smart poly(N-isopropyl acrylamide) (PNIPAM) mixed hydrogels with aliquots of ZrO(O₂C-C₁₀H₆-CO₂) (MIL-140) and graphene have been produced on a polyvinylidene fluoride (PVDF) sublayer and have been proven to enhance the performance of PVDF membranes for MD operations. Two-dimensional materials have been adhered to the membrane surface through combined wet solvent (WS) and layer-by-layer (LbL) spray deposition without requiring further subnanometer-scale size adjustment. The creation of a dual responsive nanoenvironment has enabled the cooperative events needed for water purification. According to the MD's rules, a permanent hydrophobic state of the hydrogels together with a great ability of 2D materials to assist water vapor diffusion through the membranes has been targeted. The chance to switch the density of charge at the membrane-aqueous solution interface has further allowed for the choice of greener and more efficient self-cleaning procedures with a full recovery of the permeation properties of the engineered membranes. The experimental evidence of this work confirms the suitability of the proposed approach to obtain distinct effects on a future production of reusable water from hypersaline streams under somewhat soft working conditions and in full respect to environmental sustainability.

A Critical Review of the Removal of Radionuclides from Wastewater Employing Activated Carbon as an Adsorbent

Radionuclide-contaminated water is carcinogenic and poses numerous severe health risks and environmental dangers. The activated carbon (AC)-based adsorption technique has great potential for treating radionuclide-contaminated water due to its simple design, high efficiency, wide pH range, quickness, low cost and environmental friendliness. This critical review first provides a brief overview of the concerned radionuclides with their associated health hazards as well as different removal techniques and their efficacy of removing them. Following this overview, this study summarizes the surface characteristics and adsorption capabilities of AC derived from different biomass precursors. It compares the adsorption performance of AC to other adsorbents, such as zeolite, graphene, carbon nano-tubes and metal-organic frameworks. Furthermore, this study highlights the different factors that influence the physical characteristics of AC and adsorption capacity, including contact time, solution pH, initial concentration of radionuclides, the initial dosage of the adsorbent, and adsorption temperature. The theoretical models of adsorption isotherm and kinetics, along with their fitting parameter values for AC/radionuclide pairs, are also reviewed. Finally, the modification procedures of pristine AC, factors determining AC characteristics and the impact of modifying agents on the adsorption ability of AC are elucidated in this study; therefore, further research and development can be promoted for designing a highly efficient and practical adsorption-based radionuclide removal system.

Processing of natural fibre and method improvement for removal of endocrine-disrupting compounds

Persistent endocrine-disrupting compounds (EDCs) in bodies of water are a concern for human health and constitute an environmental issue, even if present in trace amounts. Conventional treatment systems do not entirely remove EDCs from discharge effluent. Due to the ultra-trace level of EDCs which affect human health and pose an environmental issue, developing new approaches and techniques to remove these micropollutants from the discharged effluent is vital. This review discusses the most common methods of eliminating EDCs through preliminary, primary, secondary and tertiary treatments. The adsorption process is favoured for EDC removal, as it is an economical and straightforward option. The NABC aspects, which are the need, approach, benefits and challenges, were analysed based on existing circumstances, highlighting biochar as a green and renewable adsorbent for the removal of organic contaminants. From the environmental point of view, the effectiveness of this method, which uses natural fibre from the kenaf plant as a porous and economical biochar material with a selected lignocellulosic biomass, provides insights into the advantages of biochar-derived adsorbents. Essentially, the improvement of the natural fibre as an adsorbent is a focus, using carbonisation, activation, and the physiochemical process to enhance the adsorption ability of the material for pollutants in bodies of water. This output will complement sustainable water management approaches presented in previous studies for combating the emerging pollutant crisis via novel green and environmentally safe options.

UV-irradiation assisted functionalization and binding of Pd nanoparticles in polycarbonate membranes for hydrogen separation

For hydrogen-based energy systems development, purified hydrogen (H₂) is a basic requirement and it can be achieved by using the H₂-selective membranes. For having H₂-selective membranes, it is a decent approach to embed the H₂-sensitive materials in the polymeric membranes. Palladium (Pd) is one of the widely used materials for hydrogen-selective membranes due to its strong affinity towards H₂ absorption. In the present work, we have used Pd nanoparticles in UV-functionalized track-etched polycarbonate (PC) membranes for better selectivity and permeability of H₂ gas. In the UV-irradiation process of membranes, the photo-fries mechanism leads to the C-O bond breaking from the carbonate group of PC molecules and as a result, there is a high number of bond breaking. This phenomenon provides the more active sites for the attachment of Pd nanoparticles in comparison with the pristine PC membrane. The gas permeability of these membranes suggests that the selectivity of H₂ over nitrogen (N₂) and carbon dioxide (CO₂) is increased by the addition of uniformly distributed Pd nanoparticles in the functionalized membranes.

Recent Progress in a Membrane-Based Technique for Propylene/Propane Separation

The similar physico-chemical properties of propylene and propane molecules have made the separation process of propylene/propane challenging. Membrane separation techniques show substantial prospects in propylene/propane separation due to their low energy consumption and investment costs, and they have been proposed to replace or to be combined with the conventional cryogenic distillation process. Over the past decade, organosilica membranes have attracted considerable attention due to their significant features, such as their good molecular sieving properties and high hydrothermal stability. In the present review, holistic insight is provided to summarize the recent progress in propylene/propane separation using polymeric, inorganic, and hybrid membranes, and a particular inspection of organosilica membranes is conducted. The importance of the pore subnano-environment of organosilica membranes is highlighted, and future directions and perspectives for propylene/propane separation are also provided.

Scalable crystalline porous membranes: current state and perspectives

Crystalline porous materials (CPMs) with uniform and regular pore systems show great potential for separation applications using membrane technology. Along with the research on the synthesis of precisely engineered porous structures, significant attention has been paid to the practical application of these materials for preparation of crystalline porous membranes (CPMBs). In this review, the progress made in the preparation of thin, large area and defect-free CPMBs using classical and novel porous materials and processing is presented. The current state-of-the-art of scalable CPMBs with different nodes (inorganic, organic and hybrid) and various linking bonds (covalent, coordination, and hydrogen bonds) is revealed. The advances made in the scalable production of high-performance crystalline porous membranes are categorized according to the strategies adapted from polymer membranes (interfacial assembly, solution-casting, melt extrusion and polymerization of CPMs) and tailored based on CPM properties (seeding-secondary growth, conversion of precursors, electrodeposition and chemical vapor deposition). The strategies are compared and ranked based on their scalability and cost. The potential applications of CPMBs have been concisely summarized. Finally, the performance and challenges in the preparation of scalable CPMBs with emphasis on their sustainability are presented.

Pore engineering of metal-organic frameworks for ethylene purification

Ethylene production is an important and direct indicator related to the development of the petrochemical industry in a country. However, the separation and purification of ethylene is an extremely energy-consuming process. In this review, the latest progress in the purification of ethylene using metal organic frameworks (MOFs), a new type of physical adsorbent, is summarized according to four classifications of pore engineering, including pore surface functionalization, molecular sieving, controlled framework softness and dynamic pore-dominated molecular diffusion. Finally, the current challenges and future prospects in this field are also discussed.

Anisotropic Gas Separation in Oriented ZIF-95 Membranes Prepared by Vapor-Assisted In-Plane Epitaxial Growth

Control of the microstructure grain orientation, grain boundaries and thickness are crucial for MOF membranes. We report a novel synthesis strategy to prepare highly c-oriented ZIF-95 membranes through vapor-assisted in-plane epitaxial growth. In a mixed DMF/water vapor atmosphere, in-plane epitaxial growth of a ZIF-95 seeds layer was achieved to obtain an oriented and well-intergrown ZIF-95 membrane with a thickness of only 600 nm. Demonstrated by both experimental and simulation studies, the c-oriented ZIF-95 membrane displayed superior separation performance because a perfectly oriented structure resulted in a notable reduction of intercrystalline defects and transport pathways. For the separation of equimolar binary mixtures at 100 °C and 1 bar, the mixture separation factors of H₂ /CO₂ and H₂ /CH₄ were 32.2 and 53.7, respectively, with an H₂ permeance of over 7.9×10^-7  mol m^-2  s^-1  Pa^-1 , which was 4.6 times higher than that of a randomly oriented ZIF-95 membrane.

Catalytically Active Hollow Fiber Membranes with Enzyme-Embedded Metal-Organic Framework Coating

Metal-organic frameworks (MOFs) are suitable enzyme immobilization matrices. Reported here is the in situ biomineralization of glucose oxidase (GOD) into MOF crystals (ZIF-8) by interfacial crystallization. This method is effective for the selective coating of porous polyethersulfone microfiltration hollow fibers on the shell side in a straightforward one-step process. MOF layers with a thickness of 8 μm were synthesized, and fluorescence microscopy and a colorimetric protein assay revealed the successful inclusion of GOD into the ZIF-8 layer with an enzyme concentration of 29±3 μg cm^-2 . Enzymatic activity tests revealed that 50 % of the enzyme activity is preserved. Continuous enzymatic reactions, by the permeation of β-d-glucose through the GOD@ZIF-8 membranes, showed a 50 % increased activity compared to batch experiments, emphasizing the importance of the convective transport of educts and products to and from the enzymatic active centers.

Fabrication of Biobased Hydrophobic Hybrid Cotton Fabrics Using Molecular Self-Assembly: Applications in the Development of Gas Sensor Fabrics

Inadvertent inhalation of various volatile organic compounds during industrial processes, such as coal and metal mining, metal manufacturing, paper and pulp industry, food processing, petroleum refining, and concrete and chemical industries, has caused an adverse effect on human health. In particular, exposure to trimethylamine (TMA), a fishy odor poisonous gas, resulted in numerous health hazards such as neurotoxicity, irritation in eyes, nose, skin, and throat, blurred vision, and many more. According to the environmental protection agency, TMA in the level of 0.10 ppm is generally considered as safe, and excess dose results in "trimethylaminuria" or "fish odor syndrome." In order to avoid the health hazards associated with the inhalation of TMA, there is an urge to design a sensor for TMA detection even at low levels for use in food-processing industries, medical diagnosis, and environment. In this report, for the first time, we have developed a TMA sensor fabric using a sequential self-assembly process from silver-incorporated glycolipids. Formation of self-assembled supramolecular architecture, interaction of the assembled structure with the cotton fabric, and sensing mechanism were completely investigated with the help of various instrumental methods. To our surprise, the developed fabric displayed a transient response for 1-500 ppm of TMA and a stable response toward 100 ppm of TMA for 15 days. We believe that the reported flexible TMA sensor fabrics developed via the sequential self-assembly process hold great promise for various innovative applications in environment, healthcare, medicine, and biology.

Solid Sorbents as a Retrofit Technology for CO2 Removal from Natural Gas Under High Pressure and Temperature Conditions

The capture of CO2 under high pressure and temperature is challenging and is required in a number for industrial applications including natural gas processing. In this work, we examine the use of benchmark hybrid ultraporous materials HUMs for their potential use in CO2 adsorption processes under high-pressure conditions, with three varying temperatures (283, 298 and 318 K). NbOFFOVE-1-Ni and SIFSIX-3-Ni were the selected HUMs given their established superior CO2 capacity under low pressure (0-1 bar). Both are microporous with highly ordered crystalline structures as compared to the mesoporous hexagonal silica (Santa Barbara Anhydrous-15 (SBA-15)). SBA-15 was previously tested for both low and high-pressure applications and can serve as a benchmark in this study. Sorbent characterization using XRD, SEM, FTIR and N2 adsorption were conducted to assure the purity and structure of the sorbents. TGA analysis were conducted to establish the thermal stability of the sorbents under various temperatures. High-pressure CO2 adsorption was conducted from 0-35 bar using magnetic suspension balance (Rubotherm). Although the SBA-15 had the highest surface (527 m3/g) are of the three adsorbents, the CO2 adsorption capacity (0.42 mmol/g) was an order of magnitude less than the studies HUMs with SIFSIX-3-Ni having 2.6 mmol/g, NbOFFIVE-1-Ni achieving 2.5 mmol/g at 298 K. Multistage adsorption isotherms were obtained at different pressures. In addition, results indicate that electrostatics in HUMs are most effective at improving isosteric heat of adsorption Qst and CO2 uptake. Higher temperatures had negative effect on adsorption capacity for the HUMs and SBA-15 at pressures between 7-9 bar. In SAB-15 the effect of temperature is reversed in what is known as a cross over phenomena.

Optimized nanospace of coordination isomers with selenium sites for acetylene separation

Assisted by functional Cu and Se sites, a new group of porous isomers demonstrated systematically tunable C₂H₂/CO₂ separation.

Alternatives to Cryogenic Distillation: Advanced Porous Materials in Adsorptive Light Olefin/Paraffin Separations

As primary feedstocks in the petrochemical industry, light olefins such as ethylene and propylene are mainly obtained from steam cracking of naphtha and short chain alkanes (ethane and propane). Due to their similar physical properties, the separations of olefins and paraffins-pivotal processes to meet the olefin purity requirement of downstream processing-are typically performed by highly energy-intensive cryogenic distillation at low temperatures and high pressures. To reduce the energy input and save costs, adsorptive olefin/paraffin separations have been proposed as promising techniques to complement or even replace cryogenic distillation, and growing efforts have been devoted to developing advanced adsorbents to fulfill this challenging task. In this Review, a holistic view of olefin/paraffin separations is first provided by summarizing how different processes have been established to leverage the differences between olefins and paraffins for effective separations. Subsequently, recent advances in the development of porous materials for adsorptive olefin/paraffin separations are highlighted with an emphasis on different separation mechanisms. Last, a perspective on possible directions to push the limit of the research in this field is presented.

Zeolitic Imidazolate Framework Membranes for Light Olefin/Paraffin Separation

Propylene/propane and ethylene/ethane separations are performed by energy-intensive distillation processes, and membrane separation may provide substantial energy and capital cost savings. Zeolitic imidazolate frameworks (ZIFs) have emerged as promising membrane materials for olefin/paraffin separation due to their tunable pore size and chemistry property, and excellent chemical and thermal stability. In this review, we summarize the recent advances on ZIF membranes for propylene/propane and ethylene/ethane separations. Membrane fabrication methods such as in situ crystallization, seeded growth, counter-diffusion synthesis, interfacial microfluidic processing, vapor-phase and current-driven synthesis are presented. The gas permeation and separation characteristics and membrane stability are also discussed.

Cyclodextrin-Based Metal-Organic Frameworks (CD-MOFs) in Pharmaceutics and Biomedicine

Metal-organic frameworks (MOFs) show promising application in biomedicine and pharmaceutics owing to their extraordinarily high surface area, tunable pore size, and adjustable internal surface properties. However, MOFs are prepared from non-renewable or toxic materials, which limit their real-world applications. Cyclodextrins (CDs) are a typical natural and biodegradable cyclic oligosaccharide and are primarily used to enhance the aqueous solubility, safety, and bioavailability of drugs by virtue of its low toxicity and highly flexible structure, offering a peculiar ability to form CD/drug inclusions. A sophisticated strategy where CD is deployed as a ligand to form an assembly of cyclodextrin-based MOFs (CD-MOFs) may overcome real-world application drawbacks of MOFs. CD-MOFs incorporate the porous features of MOFs and the encapsulation capability of CD for drug molecules, leading to outstanding properties when compared with traditional hybrid materials. This review focuses on the inclusion technology and drug delivery properties associated with CD-MOFs. In addition, synthetic strategies and currently developed uses of CD-MOFs are highlighted as well. Also, perspectives and future challenges in this rapidly developing research area are discussed.

Enhanced Breakthrough Efficiency by a Chemically Stable Porous Coordination Polymer with Optimized Nanochannel

High separation efficiency is very important for process of pressure swing adsorption (PSA) in the industry. Herein, we propose a fine design of chemically stable porous coordination polymers (PCPs) with optimized nanochannel by strategy of inserting and shifting shortest alkyl group on T-shaped ligand. Remarkably, the synergistic effect of optimized nanochannel, unique crystal morphology and fitted channel enable sharply enhanced breakthrough efficiency of C₂H_6/4/CH₄, 1.17 or 0.77 g of CH₄ can be separated from corresponding dual mixtures (2/8, v/v) by 1 g of NTU-25 at 273 K, which was further validated and understood by controlled experiments and density functional theory (DFT) computations.