Recent trends in the synthesis of polyelectrolytes

Expedient Synthesis and Ring-Opening Metathesis Polymerization of Pyridinonorbornenes

Pyridine-containing polymers are promising materials for a variety of applications from the capture of contaminants to the self-assembly of block copolymers. However, the innate Lewis basicity of the pyridine motif often hampers living polymerization catalyzed by transition-metal complexes. Herein, we report the expedient synthesis of pyridinonorbornene monomers via a [4+2] cycloaddition between 2,3-pyridynes and cyclopentadiene. Well-controlled ring-opening metathesis polymerization was enabled by careful structural design of the monomer. Polypyridinonorbornenes exhibited high Tg and Td, a promising feature for high-temperature applications. Investigation of the polymerization kinetics and of the reactivity of the chain ends shed light on the influence of nitrogen coordination on the chain-growth mechanism.

Polyelectrolytes for Enzyme Immobilization and the Regulation of Their Properties

In this review, we considered aspects related to the application of polyelectrolytes, primarily synthetic polyanions and polycations, to immobilize enzymes and regulate their properties. We mainly focused on the description of works in which polyelectrolytes were used to create complex and unusual systems (self-regulated enzyme-polyelectrolyte complexes, artificial chaperones, polyelectrolyte brushes, layer-by-layer immobilization and others). These works represent the field of "smart polymers", whilst the trivial use of charged polymers as carriers for adsorption or covalent immobilization of proteins is beyond the scope of this short review. In addition, we have included a section on the molecular modeling of interactions between proteins and polyelectrolytes, as modeling the binding of proteins with a strictly defined, and already known, spatial structure, to disordered polymeric molecules has its own unique characteristics.

Preparation and modification methods of defective titanium dioxide-based nanoparticles for photocatalytic wastewater treatment-a comprehensive review

The rapid population growth and industrial expansion worldwide have created serious water contamination concerns. To curb the pollution issue, it has become imperative to use a versatile material for the treatment. Titanium dioxide (TiO₂) has been recognized as the most-studied nanoparticle in various fields of science and engineering due to its availability, low cost, efficiency, and other fascinating properties with a wide range of applications in modern technology. Recent studies revealed the photocatalytic activity of the material for the treatment of industrial effluents to promote environmental sustainability. With the wide band gap energy of 3.2 eV, TiO₂ can be activated under UV light; thus, many strategies have been proposed to extend its photoabsorption to the visible light region. In what follows, this has generated increasing attention to study its characteristics and structural modifications in different forms for photocatalytic applications. The present review provides an insight into the understanding of the synthesis methods of TiO₂, the current progress in the treatment techniques for the degradation of wide environmental pollutants employing modified TiO₂ nanoparticles, and the factors affecting its photocatalytic activities. Further, recent developments in using titania for practical applications, the approach for designing novel nanomaterials, and the prospects and opportunities in this exciting area have been discussed.

Poly(vinyl pyridine) and Its Quaternized Derivatives: Understanding Their Solvation and Solid State Properties

A series of N-methyl quaternized derivatives of poly(4-vinylpyridine) (PVP) were synthesized in high yields with different degrees of quaternization, obtained by varying the methyl iodide molar ratio and affording products with unexplored optical and solvation properties. The impact of quaternization on the physicochemical properties of the copolymers, and notably the solvation properties, was further studied. The structure of the synthesized polymers and the quaternization degrees were determined by infrared and nuclear magnetic spectroscopies, while their thermal characteristics were studied by differential scanning calorimetry and their thermal stability and degradation by thermogravimetric analysis (TG-DTA). Attention was given to their optical properties, where UV-Vis and diffuse reflectance spectroscopy (DRS) measurements were carried out. The optical band gap of the polymers was calculated and correlated with the degree of quaternization. The study was further orientated towards the solvation properties of the polymers in binary solvent mixtures that strongly depend on the degree of quaternization, enabling a better understanding of the key polymer (solute)-solvent interactions. The assessment of the underlying solvation phenomena was performed in a system of different ratios of DMSO/H₂O and the solvatochromic indicator used was Reichardt’s dye. Solvent polarity parameters have a significant effect on the visible spectra of the nitrogen quaternization of PVP studied in this work and a detailed path towards this assessment is presented.

Stimulus-Responsive Polyelectrolyte Surfaces: Switching Surface Properties from Polycationic/Antimicrobial to Polyzwitterionic/Protein-Repellent

Surfaces coated with polyzwitterions are most well-known for their ability to resist protein adsorption. In this article, a surface-attached hydrophobically modified poly(carboxybetaine) is presented. When protonated by changes of the pH of the surrounding medium, this protein-repellent polyzwitterion switches to a polycationic state in which it is antimicrobially active and protein-adhesive. The pH range in which these two states exist are recorded by zeta potential measurements. Adsorption studies at different pH values (monitored by surface plasmon resonance spectroscopy) confirm that the adhesion of protein is pH dependent and reversible, that is, protein can be released upon a pH change from pH 3 to pH 7.4. At physiological pH, the poly(carboxyzwitterion) is antimicrobially active, presumably because it becomes protonated by bacterial metabolites during the antimicrobial activity assay. Stability studies confirm that the here presented material is storage-stable, yet hydrolyses after longer incubation in aqueous media.

A Review on Ionic Liquid Gas Separation Membranes

Ionic liquids have attracted the attention of the industry and research community as versatile solvents with unique properties, such as ionic conductivity, low volatility, high solubility of gases and vapors, thermal stability, and the possibility to combine anions and cations to yield an almost endless list of different structures. These features open perspectives for numerous applications, such as the reaction medium for chemical synthesis, electrolytes for batteries, solvent for gas sorption processes, and also membranes for gas separation. In the search for better-performing membrane materials and membranes for gas and vapor separation, ionic liquids have been investigated extensively in the last decade and a half. This review gives a complete overview of the main developments in the field of ionic liquid membranes since their first introduction. It covers all different materials, membrane types, their preparation, pure and mixed gas transport properties, and examples of potential gas separation applications. Special systems will also be discussed, including facilitated transport membranes and mixed matrix membranes. The main strengths and weaknesses of the different membrane types will be discussed, subdividing them into supported ionic liquid membranes (SILMs), poly(ionic liquids) or polymerized ionic liquids (PILs), polymer/ionic liquid blends (physically or chemically cross-linked 'ion-gels'), and PIL/IL blends. Since membrane processes are advancing as an energy-efficient alternative to traditional separation processes, having shown promising results for complex new separation challenges like carbon capture as well, they may be the key to developing a more sustainable future society. In this light, this review presents the state-of-the-art of ionic liquid membranes, to analyze their potential in the gas separation processes of the future.

Ionic Polyureas-A Novel Subclass of Poly(Ionic Liquid)s for CO2 Capture

The growing concern for climate change and global warming has given rise to investigations in various research fields, including one particular area dedicated to the creation of solid sorbents for efficient CO2 capture. In this work, a new family of poly(ionic liquid)s (PILs) comprising cationic polyureas (PURs) with tetrafluoroborate (BF4) anions has been synthesized. Condensation of various diisocyanates with novel ionic diamines and subsequent ion metathesis reaction resulted in high molar mass ionic PURs (Mw = 12 ÷ 173 × 103 g/mol) with high thermal stability (up to 260 °C), glass transition temperatures in the range of 153-286 °C and remarkable CO2 capture (10.5-24.8 mg/g at 0 °C and 1 bar). The CO2 sorption was found to be dependent on the nature of the cation and structure of the diisocyanate. The highest sorption was demonstrated by tetrafluoroborate PUR based on 4,4'-methylene-bis(cyclohexyl isocyanate) diisocyanate and aromatic diamine bearing quinuclidinium cation (24.8 mg/g at 0 °C and 1 bar). It is hoped that the present study will inspire novel design strategies for improving the sorption properties of PILs and the creation of novel effective CO2 sorbents.

Top-Down Polyelectrolytes for Membrane-Based Post-Combustion CO2 Capture

Polymer-based CO2 selective membranes offer an energy efficient method to separate CO2 from flue gas. `Top-down' polyelectrolytes represent a particularly interesting class of polymer materials based on their vast synthetic flexibility, tuneable interaction with gas molecules, ease of processability into thin films, and commercial availability of precursors. Recent developments in their synthesis and processing are reviewed herein. The four main groups of post-synthetically modified polyelectrolytes discern ionised neutral polymers, cation and anion functionalised polymers, and methacrylate-derived polyelectrolytes. These polyelectrolytes differentiate according to the origin and chemical structure of the precursor polymer. Polyelectrolytes are mostly processed into thin-film composite (TFC) membranes using physical and chemical layer deposition techniques such as solvent-casting, Langmuir-Blodgett, Layer-by-Layer, and chemical grafting. While solvent-casting allows manufacturing commercially competitive TFC membranes, other methods should still mature to become cost-efficient for large-scale application. Many post-synthetically modified polyelectrolytes exhibit outstanding selectivity for CO2 and some overcome the Robeson plot for CO2/N2 separation. However, their CO2 permeance remain low with only grafted and solvent-casted films being able to approach the industrially relevant performance parameters. The development of polyelectrolyte-based membranes for CO2 separation should direct further efforts at promoting the CO2 transport rates while maintaining high selectivities with additional emphasis on environmentally sourced precursor polymers.

Controlling Complex Coacervation via Random Polyelectrolyte Sequences

The utilization of chemical sequence control in polymeric materials is key to enabling material design on par with biomacromolecular systems. One important avenue for scalable sequence-controlled polymers leverages the random copolymerization of distinct monomers, with the statistical distribution of the monomeric sequence arising from reaction kinetics following a first-order Markov process. Here we utilize the framework of the random phase approximation (RPA) to develop a theory for the phase behavior of symmetric polyelectrolyte coacervates whose chemical sequences are dictated by simple statistical distributions. We find that a high charge "blockiness" within the random sequences favors the formation of denser and more salt-resistant coacervates while simultaneously increasing the width of the two-phase region. We trace these physical effects to the increased cooperativity of Coulomb interactions that results from increased charge blockiness in oppositely charged polyelectrolytes.

Binding of Cobaltocenium-containing Polyelectrolytes with Anionic Probes

Cationic cobaltocenium-containing polyelectrolytes have a unique ability to form ionic complex with various anionic species. We carried out two sets of model study to compare the relative binding strength of a cobaltocenium-containing polyelectrolyte. First, the nature and relative strength of intermolecular interaction between cobaltocenium-containing polyelectrolytes and different anionic probes were investigated by spectroscopic methods. A dye-displacement method was used to monitor absorbance and fluorescence emissions. Second, the binding strength of this cobaltocenium-containing polyelectrolyte was compared with a classical quaternary ammonium polymer. Formation of polyelectrolyte complex between the cobaltocenium-containing polyelectrolyte and a common anionic polyelectrolyte at various concentrations was examined by optical absorption and light scattering.

Transfection of Antisense Oligonucleotides Mediated by Cationic Vesicles Based on Non-Ionic Surfactant and Polycations Bearing Quaternary Ammonium Moieties

Three different ionene polymers with varying quaternary ammonium moieties were used as a proof of concept for the formulation of antisense oligonucleotides, which are capable of inhibiting Renilla luciferase messenger ribonucleic acid (mRNA). Cationic vesicles, consisting of cationic polymer, antisense oligonucleotide (Luc) and non-ionic surfactant polysorbate 80, were investigated regarding their ζ potential, cytotoxicity and transfection efficiency. Deoxyribonucleic acid- (DNA) forming complexes in the presence of cationic vesicles were also investigated in terms of small-angle X-ray scattering (SAXS). The studied cationic vesicles showed very little, if any, toxicity against HeLa cells. Transfection abilities proved to vary strongly depending on the present quaternary ammonium moiety.

Aromatic ionene topology and counterion-tuned gelation of acidic aqueous solutions

Unusual gelation of acidic solutions was achieved using polycations bearing quaternary ammonium moieties. These ionene polymers are based on a disubstituted phenylene dibenzamide core, which allows the construction of different topomers (i.e. ortho-1, meta-2 and para-3). The topology of the polymers was found to play a key role on their aggregation behaviour both in pure water and in a variety of aqueous acidic solutions leading to the formation of stable acidic gels. Specifically, ortho-1 showed superior gelation ability than the analogues meta-2 and para-3 in numerous solutions of different pH and ionic strengths. Lower critical gelation concentrations, higher gel-to-sol transition temperatures and faster gelation were usually observed for ortho-1 regardless the solvent system. Detailed computational molecular dynamic simulations revealed a major role of the counterion (Cl^-) and specific polymerpolymer interactions. In particular, hydrogen bonds, N-Hπ interactions and intramolecular π-π stacking networks are distinctive in ortho-1. In addition, counterions located at internal hydration regions also affect to such polymerpolymer interactions, acting as binders and, therefore, providing additional stability.

Antimicrobial and Hemolytic Studies of a Series of Polycations Bearing Quaternary Ammonium Moieties: Structural and Topological Effects

A series of polycations bearing quaternary ammonium moieties have shown antimicrobial activity against the Gram-negative bacterium Escherichia coli. Different polymer topologies governed by a disubstituted aromatic core as well as different diamine-based linkers were found to influence the antimicrobial properties. Moreover, the hemolytic activity against human red blood cells was measured and demonstrated good biocompatibility and selectivity of these polycations for bacteria over mammalian cells.

Amphiphilic and double hydrophilic block copolymers containing a polydehydroalanine block

We present the synthesis and characterization of amphiphilic and double hydrophilic block copolymers containing a polydehydroalanine (PDha) block.

Clickable Poly(ionic liquids): A Materials Platform for Transfection

The potential applications of cationic poly(ionic liquids) range from medicine to energy storage, and the development of efficient synthetic strategies to target innovative cationic building blocks is an important goal. A post-polymerization click reaction is reported that provides facile access to trisaminocyclopropenium (TAC) ion-functionalized macromolecules of various architectures, which are the first class of polyelectrolytes that bear a formal charge on carbon. Quantitative conversions of polymers comprising pendant or main-chain secondary amines were observed for an array of TAC derivatives in three hours using near equimolar quantities of cyclopropenium chlorides. The resulting TAC polymers are biocompatible and efficient transfection agents. This robust, efficient, and orthogonal click reaction of an ionic liquid, which we term ClickabIL, allows straightforward screening of polymeric TAC derivatives. This platform provides a modular route to synthesize and study various properties of novel TAC-based polymers.

Antimicrobial polymeric materials with quaternary ammonium and phosphonium salts

Polymeric materials containing quaternary ammonium and/or phosphonium salts have been extensively studied and applied to a variety of antimicrobial-relevant areas. With various architectures, polymeric quaternary ammonium/phosphonium salts were prepared using different approaches, exhibiting different antimicrobial activities and potential applications. This review focuses on the state of the art of antimicrobial polymers with quaternary ammonium/phosphonium salts. In particular, it discusses the structure and synthesis method, mechanisms of antimicrobial action, and the comparison of antimicrobial performance between these two kinds of polymers.

Unconventional poly(ionic liquid)s combining motionless main chain 1,2,3-triazolium cations and high ionic conductivity

We report the synthesis of poly(1,2,3-triazolium ionic liquid)s by the polyaddition of α-azide-ω-alkyne monomers with short n-hexyl and diethylene glycol spacers by both copper(I)-catalyzed and thermal Huisgen azide–alkyne 1,3-dipolar cycloaddition.

Synthesis of two AMPS-based polymerizable room temperature ionic liquids and swelling difference between their co-polymeric gels with HEMA

Two polymerizable room temperature ionic liquids (RTIL), AMPS-BA and AMPS-DMAEMA, were synthesized by neutralization of 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) with butylamine (BA) and 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA), respectively, in acetone, followed by evaporation of the solvent under a reduced pressure at room temperature. The RTILs were characterized by differential scanning calorimetry to determine their glass transition temperatures (Tg). Co-polymeric gels of the RTILs with 2-hydroxyethylmethacrylate (HEMA) were prepared by aqueous solution polymerization using N,N′-methylenebisacrylamide (MBAm) as a cross-linker and ammonium persulfate as an initiator. The superabsorbency of the gels in water and various organic solvents was gravimetrically investigated. The results showed that the Tg of AMPS-BA and AMPS-DMAEMA was -47.7°C and -45.8°C, respectively. Poly(AMPS-BA-co-HEMA) gels exhibited superabsorbency in both water and various organic solvents, while poly(AMPS-DMAEMA-co-HEMA) gels did not swell in any liquids. The mechanism for the swelling difference between poly(AMPS-BA-co-HEMA) gels and poly(AMPS-DMAEMA-co-HEMA) gels was critically discussed.

Phosphonium-functionalized polyethylene: a new class of base-stable alkaline anion exchange membranes

A tetrakis(dialkylamino)phosphonium cation was evaluated as a functional group for alkaline anion exchange membranes (AAEMs). The base stability of [P(N(Me)Cy)(4)](+) was directly compared to that of [BnNMe(3)](+) in 1 M NaOD/CD(3)OD. The high base stability of [P(N(Me)Cy)(4)](+) relative to [BnNMe(3)](+) inspired the preparation of AAEM materials composed of phosphonium units attached to polyethylene. The AAEMs (hydroxide conductivity of 22 ± 1 mS cm(-1) at 22 °C) were prepared using ring-opening metathesis polymerization, and their stabilities were evaluated in 15 M KOH at 22 °C and in 1 M KOH at 80 °C.