Electrokinetics of soft polymeric interphases with layered distribution of anionic and cationic charges

Diffusiophoretic Behavior of Polyelectrolyte-Coated Particles

Diffusiophoresis, the movement of particles under a solute concentration gradient, has practical implications in a number of applications, such as particle sorting, focusing, and sensing. For diffusiophoresis in an electrolyte solution, the particle velocity is described by the electrolyte relative concentration gradient and the diffusiophoretic mobility of the particle. The electrolyte concentration, which typically varies throughout the system in space and time, can also influence the zeta potential of particles in space and time. This variation affects the diffusiophoretic behavior, especially when the zeta potential is highly dependent on the electrolyte concentration. In this work, we show that adsorbing a single bilayer (or 4 bilayers) of a polyelectrolyte pair (PDADMAC/PSS) on the surface of microparticles resulted in effectively constant zeta potential values with respect to salt concentration throughout the experimental range of salt concentrations. This allowed a constant potential model for diffusiophoretic transport to describe the experimental observations, which was not the case for uncoated particles in the same electrolyte system. This work highlights the use of simple polyelectrolyte pairs to tune the zeta potential and maintain constant values for precise control of diffusiophoretic transport.

Investigation of the Electrokinetic Properties of HIV-Based Virus-Like Particles

The antigen density on the surface of HIV-based virus-like particles (VLPs) plays a crucial role in the improvement of HIV vaccine potency. HIV VLPs consist of a dense protein core, which is surrounded by a lipid bilayer and whose surface is usually decorated with antigenic glycoproteins. The successful downstream processing of these particles is challenging, and the high-resolution and cost-efficient purification of HIV-based VLPs has not yet been achieved. Chromatography, one of the major unit operations involved in HIV VLP purification strategies, is usually carried out by means of ion exchangers or ion-exchange membranes. Understanding the electrokinetic behavior of HIV-based VLPs may help to improve the adjustment and efficiency of the corresponding chromatographic processes. In this study, we investigated the electrokinetics and aggregation of both undecorated and decorated VLPs and interpreted the data from the perspective of the soft particle model developed by Ohshima (OSPM), which fails to fully predict the behavior of the studied VLPs. Post-Ohshima literature, and particularly the soft multilayer particle model developed by Langlet et al., provides an alternative theoretical framework to overcome the limits of the OSPM. We finally hypothesized that the electrophoretic mobility of HIV-based VLPs is controlled by an electrohydrodynamic interplay between envelope glycoproteins, lipid bilayer, and Gag envelope.

Ion Transport in Intelligent Nanochannels: A Comparative Analysis of the Role of Electric Field

This research delves into investigating ion transport behavior within nanochannels, enhanced through modification with a negatively charged polyelectrolyte layer (PEL), aimed at achieving superior control. The study examines two types of electric fields─direct current and alternating current with square, sinusoidal, triangular, and sawtooth waveforms─to understand their impact on ion transport. Furthermore, the study compares symmetric (cylindrical) and asymmetric (conical) nanochannel geometries to assess the influence of overlapping electrical double layers (EDLs) in generating specific electrokinetic behaviors such as ionic current rectification (ICR) and ion selectivity. The research employs the finite element method to solve the coupled Poisson-Nernst-Planck and Navier-Stokes equations under unsteady-state conditions. By considering factors such as electrolyte concentration, soft layer charge density, and electric field type, the study evaluates ion transport performance in charged nanochannels, investigating effects on concentration polarization, electroosmotic flow (EOF), ion current, rectification, and ion selectivity. Notably, the study accounts for ion partitioning between the PEL and electrolyte to simulate real conditions. Findings reveal that conical nanochannels, due to improved EDL overlap, significantly enhance ion transport and related characteristics compared to cylindrical ones. For instance, under ηε = ηD = 0.8, ημ = 2, C0 = 20 mM, and NPEL/NA = 80 mol m-3 conditions, the average EOF for conical and cylindrical geometries is 0.1 and 0.008 m/s, respectively. Additionally, the study explores ion selectivity and rectification based on the electric field type, unveiling the potential of nanochannels as ion gates or diodes. In cylindrical nanochannels, the ICR remains at unity, with lower ion selectivity across waveforms compared to conical channels. Furthermore, rectification and ion selectivity trends are identified as Rf,square > Rf,DC > Rf,triangular > Rf,sinusoidal > Rf,sawtooth and Ssawtooth > Ssinusoidal > Striangular > SDC > Ssquare for conical nanochannels. Our study of ion transport control in nanochannels, guided by tailored electric fields and unique geometries, offers versatile applications in the field of Analytical Chemistry. This includes enhanced sample separation, controlled drug delivery, optimized pharmaceutical analysis, and the development of advanced biosensing technologies for precise chemical analysis and detection. These applications highlight the diverse analytical contributions of our methodology, providing innovative solutions to challenges in chemical analysis and biosensing.

Electrostatics of soft (bio)interfaces: Corrections of mean-field Poisson-Boltzmann theory for ion size, dielectric decrement and ion-ion correlation

HYPOTHESIS

Electrostatics of soft (ion-permeable) (bio)particles (e.g. microorganisms, core/shell colloids) in aqueous electrolytes is commonly formulated by the mean-field Poisson-Boltzmann theory and integration of the charge contributions from electrolyte ions and soft material. However, the effects connected to the size of the electrolyte ions and that of the structural charges carried by the particle, to dielectric decrement and ion-ion correlations on soft interface electrostatics have been so far considered at the margin, despite the limits of the Gouy theory for condensed and/or multivalent electrolytes.

EXPERIMENTS

Accordingly, we modify herein the Poisson-Boltzmann theory for core/shell (bio)interfaces to include the aforementioned molecular effects considered separately or concomitantly. The formalism is applicable for poorly to highly charged particles in the thin electric double layer regime and to unsymmetrical multivalent electrolytes.

FINDINGS

Computational examples of practical interests are discussed with emphasis on how each considered molecular effect or combination thereof affects the interfacial potential distribution depending on size and valence of cations and anions, size of particle charges, length scale of ionic correlations and shell-to-Debye layer thickness ratio. The origins of here-evidenced pseudo-harmonic potential profile and ion size-dependent screening of core/shell particle charges are detailed. In addition, the existence and magnitude of the Donnan potential when reached in the shell layer are shown to depend on the excluded volumes of the electrolyte ions.

Quantitative model for predicting the electroosmotic flow in dual-pole nanochannels

Developing and assessing nanofluidic systems is time-consuming and costly owing to the method's novelty; hence, modeling is essential to determine the optimal areas for implementation and to grasp its workings. In this work, we examined the influence of dual-pole surface and nanopore configuration on ion transfer simultaneously. To achieve this, the two trumpet and cigarette configuration were coated with a dual-pole soft surface so that the negative charge could be positioned in the nanopore's small aperture. Subsequently, the Poisson-Nernst-Planck and Navier-Stokes equations were simultaneously solved under steady-state circumstances using varied values physicochemical properties for the soft surface and electrolyte. The pore's selectivity was S Trumpet > S Cigarette ${S}_{{\rm{Trumpet}}} &gt; {S}_{{\rm{Cigarette}}}$ , and the rectification factor, on the other hand, was R f Cigarette < R f Trumpet ${R}_{{f}_{{\rm{Cigarette}}}} &lt; {R}_{{f}_{{\rm{Trumpet}}}}$ , when the overall concentration was very low. When the ion partitioning effect is taken into account, we clearly show that the rectifying variables for the cigarette configuration and the trumpet configuration can reach values of 45 and 49.2, when the charge density and mass concentration were 100 mol/m³ and 1 mM, respectively. By using dual-pole surfaces, the controllability of nanopores' rectifying behavior may be modified to produce superior separation performance.

Sensing force and charge at the nanoscale with a single-molecule tether

Measuring the electrophoretic mobility of molecules is a powerful experimental approach for investigating biomolecular processes. A frequent challenge in the context of single-particle measurements is throughput, limiting the obtainable statistics. Here, we present a molecular force sensor and charge detector based on parallelised imaging and tracking of tethered double-stranded DNA functionalised with charged nanoparticles interacting with an externally applied electric field. Tracking the position of the tethered particle with simultaneous nanometre precision and microsecond temporal resolution allows us to detect and quantify the electrophoretic force down to the sub-piconewton scale. Furthermore, we demonstrate that this approach is suitable for detecting changes to the particle charge state, as induced by the addition of charged biomolecules or changes to pH. Our approach provides an alternative route to studying structural and charge dynamics at the single molecule level.

Chemodynamic features of nanoparticles: Application to understanding the dynamic life cycle of SARS-CoV-2 in aerosols and aqueous biointerfacial zones

We review concepts involved in describing the chemodynamic features of nanoparticles and apply the framework to gain physicochemical insights into interactions between SARS-CoV-2 virions and airborne particulate matter (PM). Our analysis is highly pertinent given that the World Health Organisation acknowledges that SARS-CoV-2 may be transmitted by respiratory droplets, and the US Center for Disease Control and Prevention recognises that airborne transmission of SARS-CoV-2 can occur. In our theoretical treatment, the virion is assimilated to a core-shell nanoparticle, and contributions of various interaction energies to the virion-PM association (electrostatic, hydrophobic, London-van der Waals, etc.) are generically included. We review the limited available literature on the physicochemical features of the SARS-CoV-2 virion and identify knowledge gaps. Despite the lack of quantitative data, our conceptual framework qualitatively predicts that virion-PM entities are largely able to maintain equilibrium on the timescale of their diffusion towards the host cell surface. Comparison of the relevant mass transport coefficients reveals that virion biointernalization demand by alveolar host cells may be greater than the diffusive supply. Under such conditions both the free and PM-sorbed virions may contribute to the transmitted dose. This result points to the potential for PM to serve as a shuttle for delivery of virions to host cell targets. Thus, our critical review reveals that the chemodynamics of virion-PM interactions may play a crucial role in the transmission of COVID-19, and provides a sound basis for explaining reported correlations between episodes of air pollution and outbreaks of COVID-19.

Tripling the reverse electrodialysis power generation in conical nanochannels utilizing soft surfaces

We theoretically investigate the feasibility of enhancing the reverse electrodialysis power generation in nanochannels by covering the surface with a polyelectrolyte layer (PEL). Along these lines, two conical nanochannels are considered that differ in the extent of the covering. Each nanochannel connects two large reservoirs filled with KCl electrolytes of different ionic concentrations. Considering the Poisson-Nernst-Planck and Navier-Brinkman equations, finite-element-based numerical simulations are performed under a steady-state. The influences of the PEL properties and the salinity gradient on the reverse electrodialysis characteristics are examined in detail via a thorough parametric study. It is shown that the maximum power generated is an increasing function of the charge density and the thickness of the PEL. This means that the maximum power generated may be theoretically increased to any desired degree by covering the nanochannel surface with a sufficiently dense and thick PEL. Considering a typical PEL with a charge density of 100 mol m-3 and a thickness of 8 nm along with a high-to-low concentration ratio of 1000, we demonstrate that it is possible to extract a power density of 51.5 W m-2, which is nearly three times the maximum achievable value employing bare conical nanochannels at the same salinity gradient.

Influence of ion size effects on the electrokinetics of aqueous salt-free colloids in alternating electric fields

Electrokinetics is the science of the physical phenomena appearing at the solid-liquid interface of dispersed particles subjected to external fields. Techniques based on electrokinetic phenomena constitute an important set of tools for the electrical characterization of colloids because of their sensitivity to the properties of particle-solution interfaces. Their rigorous description may require inclusion of the effects of finite size of chemical species in the theoretical models, and, particularly in the case of salt-free (no external salt added) aqueous colloids, also consideration of water dissociation and possible carbon dioxide contamination in the aqueous solution. A new ac electrokinetic model is presented for concentrated salt-free spherical colloids for arbitrary characteristics of the particles and aqueous solution, including finite-size effects of chemical species by appropriate modifications of the chemical reaction equations to include such non-ideal aspects. The numerical solution of the electrokinetic equations in an alternating electric field has also been carried out by using a realistic non-equilibrium scenario accounting for association-dissociation processes in the chemical reactions. The results demonstrate the importance of including finite-size effects in the electrokinetic response of the colloid, mainly at high frequencies of the electric field, and for highly charged colloids. Findings of previous models for pointlike ions or for ideal salt-free colloids including finite ion size effects are recovered with the present model, for the appropriate limiting conditions.

Addressing the electrostatic component of protons binding to aquatic nanoparticles beyond the Non-Ideal Competitive Adsorption (NICA)-Donnan level: Theory and application to analysis of proton titration data for humic matter

HYPOTHESIS

Charge descriptors of aquatic nanoparticles (NPs) are evaluated from proton titration curves measured at different salt concentrations and routinely analysed by the Non-Ideal Competitive Adsorption-Donnan (NICAD) model. This model, however, suffers from approximations regarding particle electrostatics, which may bias particle charge estimation. Implementation of Poisson-Boltzmann (PB) theory within consistent treatment of NPs protolytic data is expected to address NICAD shortcomings.

EXPERIMENTS

An alternative to NICAD is elaborated on the basis of nonlinearized PB equation for soft particle electrostatics to properly unravel the electrostatic and chemical components of proton binding to NPs. A numerical package is developed for automated analysis of proton titration curves and proton affinity spectra at different salt concentrations. The performance of the method is illustrated for humic matter nanoparticles with different charge and size, and compared to that of NICAD.

FINDINGS

Unlike NICAD, PB-based treatment successfully reproduces particle charge dependence on pH for practical salt concentrations from the thin to thick electric double layer limit. Donnan representation in NICAD leads to moderate to dramatic misestimations of proton affinity and binding heterogeneity depending on particle size to Debye layer thickness ratio. Interpretation of NPs protolytic properties with PB theory further avoids adjustment of the 'particle Donnan volume' empirically introduced in NICAD.

AC Electrokinetics of Salt-Free Multilayered Polymer-Grafted Particles

Interest in the electrical properties of the interface between soft (or polymer-grafted) nanoparticles and solutions is considerable. Of particular significance is the case of polyelectrolyte-coated particles, mainly taking into account that the layer-by-layer procedure allows the control of the thickness and permeability of the layer, and the overall charge of the coated particle. Like in simpler systems, electrokinetic determinations in AC fields (including dielectric dispersion in the 1 kHz-1 MHz frequency range and dynamic electrophoresis by electroacoustic methods in the 1-18 MHz range) provide a large amount of information about the physics of the interface. Different models have dealt with the electrokinetics of particles coated by a single polymer layer, but studies regarding multi-layered particles are far scarcer. This is even more significant in the case of so-called salt-free systems; ideally, the only charges existing in this case consist of the charge in the layer(s) and the core particle itself, and their corresponding countercharges, with no other ions added. The aims of this paper are as follows: (i) the elaboration of a model for the evaluation of the electrokinetics of multi-grafted polymer particles in the presence of alternating electric fields, in dispersion media where no salts are added; (ii) to carry out an experimental evaluation of the frequency dependence of the dynamic (or AC) electrophoretic mobility and the dielectric permittivity of suspensions of polystyrene latex spherical particles coated with successive layers of cationic, anionic, and neutral polymers; and (iii) finally, to perform a comparison between predictions and experimental results, so that it can be demonstrated that the electrokinetic analysis is a useful tool for the in situ characterization of multilayered particles.

Covering the conical nanochannels with dense polyelectrolyte layers significantly improves the ionic current rectification

Because of their asymmetry, conical nanochannels/nanopores exhibit various attractive electrokinetic features, including ion selectivity, ionic concentration polarization, and ionic current rectification. The polyelectrolyte layer (PEL)-covered (soft) conical nanochannels have recently attracted significant attention because of their unique rectification characteristics. In the modeling of soft nanochannels, it is usually assumed that the properties of the PEL and the electrolyte are the same, an assumption that is not true, especially for dense PELs. In the present work, the influence of the PEL-electrolyte property difference on the ionic current rectification in conical soft nanochannels is studied. To this end, adopting a finite-element approach, the Poisson-Nernst-Planck and Navier-Stokes equations are numerically solved for a steady-state by considering different values of permittivity, diffusivity, and dynamic viscosity for the PEL and the electrolyte. The model is validated by comparing the results with the available theoretical and experimental data. The results show that the PEL-electrolyte property difference leads to a significant improvement of the rectification behavior, especially at low and moderate salt concentrations. This not only highlights the importance of considering different properties for the PEL and the electrolyte but also implies that the rectification behavior of soft nanochannels/nanopores may be improved considerably by utilizing denser PELs.

Contact-Triggered Lipofection from Multilayer Films Designed as Surfaces for in Situ Transfection Strategies in Tissue Engineering

Biomaterials, which release active compounds after implantation, are an essential tool for targeted regenerative medicine. In this study, thin multilayer films loaded with lipid/DNA complexes (lipoplexes) were designed as surface coatings for in situ transfection applicable in tissue engineering and regenerative medicine. The film production and embedding of lipoplexes were based on the layer-by-layer (LbL) deposition technique. Hyaluronic acid (HA) and chitosan (CHI) were used as the polyelectrolyte components. The embedded plasmid DNA was complexed using a new designed cationic lipid formulation, namely, OH4/DOPE 1/1, the advantageous characteristics of which have been proven already. Three different methods were tested regarding its efficiency of lipid and DNA deposition. Therefore, several surface specific analytics were used to characterize the LbL formation, the lipid DNA embedding, and the surface characteristics of the multilayer films, such as fluorescence microscopy, surface plasmon resonance spectroscopy, ellipsometry, zeta potential measurements, atomic force microscopy, and scanning electron microscopy. Interaction studies were conducted for optimized lipoplex-loaded polyelectrolyte multilayers (PEMs) that showed an efficient attachment of C2C12 cells on the surface. Furthermore, no acute toxic effects were found in cell culture studies, demonstrating biocompatibility. Cell culture experiments with C2C12 cells, a cell line which is hard to transfect, demonstrated efficient transfection of the reporter gene encoding for green fluorescent protein. In vivo experiments using the chicken embryo chorion allantois membrane animal replacement model showed efficient gene-transferring rates in living complex tissues, although the DNA-loaded films were stored over 6 days under wet and dried conditions. Based on these findings, it can be concluded that OH4/DOPE 1/1 lipoplex-loaded PEMs composed of HA and CHI can be an efficient tool for in situ transfection in regenerative medicine.

Coupling between electrokinetics and electrode kinetics by bipolar faradaic depolarisation processes in microfluidic channels

This article is concerned with the nature and impact of bipolar faradaic electron transfer processes in the context of measuring electrokinetic parameters at the interface between an electronically conductive substrate such as a solid metal layer, and a liquid medium. More specifically, it analyses the steady state electric current through the electrodic substrate layer in terms of its short-circuiting effect on the system's electrokinetic quantities, such as the streaming potential. Ample attention is paid to the electrodic behaviour of the chosen metal and its electron transfer characteristics with respect to redox functions in the medium. The electrochemical reversibility of redox couple species is expressed in terms of their oxidation and reduction rate constants as compared to their diffusive transport rates under lateral flow conditions. High values for rate constants lead to high reversibilities and large bipolar leaking currents through the metal substrate. In turn, high electron transfer rate constants generate large reductions in measured values for electrokinetic quantities such as streaming potentials that further become a non-linear function of the pressure gradient applied through the fluidic chamber. The present article presents an overview of theoretical and experimental approaches of this intricate coupling between bipolar electrode kinetics and electrokinetics and the impact from Hans Lyklema's contributions. It highlights not only the implications of bipolar faradaic depolarisation processes in electrokinetics but also the importance of bipolar electrochemistry principles in various electroanalytical applications reported for e.g. the control of microfluidic flows, for surfaces functionalisation, particles manipulation or for the wireless detection of electroactive analytes.

Electrophoresis of composite soft particles with differentiated core and shell permeabilities to ions and fluid flow

Within the framework of analytical theories for soft surface electrophoresis, soft particles are classically defined by a hard impermeable core of given surface charge density surrounded by a polyelectrolyte shell layer permeable to both electroosmotic flow and ions from background electrolyte. This definition excludes practical core-shell particles, e.g. dendrimers, viruses or multi-layered polymeric particles, defined by a polyelectrolytic core where structural charges are distributed and where counter-ions concentration and electroosmotic flow velocity can be significant. Whereas a number of important approximate expressions has been derived for the electrophoretic mobility of hard and soft particles, none of them is applicable to such generic composite core-shell particles with differentiated ions- and fluid flow-permeabilities of their core and shell components. In this work, we elaborate an original closed-form electrophoretic mobility expression for this generic composite particle type within the Debye-Hückel electrostatic framework and thin double layer approximation. The expression explicitly involves the screening Debye layer thickness and the Brinkman core and shell hydrodynamic length scales, which favors so-far missing analysis of the respective core and shell contributions to overall particle mobility. Limits of this expression successfully reproduce results from Ohshima's electrophoresis theory solely applicable to soft particles with or without hard core.

Cross-linking multilayers of poly-l-lysine and hyaluronic acid: Effect on mesenchymal stem cell behavior

BACKGROUND

Cells possess a specialized machinery through which they can sense physical as well as chemical alterations in their surrounding microenvironment that affect their cellular behavior.

AIM

In this study, we aim to establish a polyelectrolyte multilayer system of 24 layers of poly-l-lysine and hyaluronic acid to control stem cell response after chemical cross-linking.

METHODS AND RESULTS

The multilayer build-up process is monitored using different methods, which show that the studied polyelectrolyte multilayer system grows exponentially following the islands and islets theory. Successful chemical cross-linking is monitored by an increased zeta potential toward negative magnitude and an extraordinary growth in thickness. Human adipose-derived stem cells are used here and a relationship between cross-linking degree and cell spreading is shown as cells seeded on higher cross-linked polyelectrolyte multilayer show enhanced spreading. Furthermore, cells that fail to establish focal adhesions on native and low cross-linked polyelectrolyte multilayer films do not proliferate to a high extent in comparison to cells seeded on highly cross-linked polyelectrolyte multilayer, which also show an increased metabolic activity. Moreover, this study shows the relation between cross-linking degree and human adipose-derived stem cell lineage commitment. Histological staining reveals that highly cross-linked polyelectrolyte multilayers support osteogenic differentiation, whereas less cross-linked and native polyelectrolyte multilayers support adipogenic differentiation in the absence of any specific inducers.

CONCLUSION

Owing to the precise control of polyelectrolyte multilayer properties such as potential, wettability, and viscoelasticity, the system presented here offers great potential for guided stem cell differentiation in regenerative medicine, especially in combination with materials exhibiting a defined surface topography.

Remarkable reversal of electrostatic interaction forces on zwitterionic soft nanointerfaces in a monovalent aqueous electrolyte: an AFM study at the single nanoparticle level

Soft (nano)colloids are increasingly used in medical applications due to the versatile options they offer in terms of e.g. tunable chemical composition, adaptable physical properties and (bio)functionalization perspectives. Obtaining a clear understanding of the nature of the interaction forces that such particles experience with neighboring charged (bio)surfaces is a mandatory prerequisite to draw a comprehensive and mechanistic picture of their stability and reactivity and to further optimize their current functionalities. In this study, adopting an original strategy for nanoparticle attachment to atomic force microscopy (AFM) tips, we demonstrate that the sign of electrostatic forces between carboxylate-terminated poly(amidoamine) nanodendrimers (∼9 nm in diameter) and planar cysteamine-coated gold surfaces can be tailored under fixed pH conditions upon the sole variation of the monovalent salt concentration in solution. The origin of this unconventional electrostatic force reversal is deciphered upon confrontation between AFM force measurements and mean-field force evaluation performed beyond the Derjaguin approximation by integrating the dendrimer and cysteamine electrostatic properties derived independently from electrokinetic measurements. It is shown that the electrostatic force reversal (i) originates from the zwitterionic character of the nanodendrimer-solution interphase, and (ii) becomes operational under the strict condition that the sub-nanometric separation distance between peripheral carboxylate groups and intraparticulate amines is of the order of the characteristic electric Debye layer thickness. The possibility to mediate - via suitable adjustment of monovalent salt content in solution - both the magnitude and sign of the electrostatic forces acting on soft interfaces with zwitterionic functionality paves the way for the design of innovative strategies to control the stability of nanoparticles against aggregation, and to modulate their adhesion onto inorganic surfaces or living organisms.

Macroion adsorption-electrokinetic and optical methods

Recent studies on macroion adsorption at solid/liquid interfaces evaluated by electrokinetic and optical methods are reviewed. In the first section a description of electrokinetic phenomena at a solid surface is briefly outlined. Various methods for determining both static and dynamic properties of the electrical double layer, such as the appropriate location of the slip plane, are presented. Theoretical approaches are discussed concerning quantitative interpretation of streaming potential/current measurements of homogeneous macroscopic interfaces. Experimental results are presented, involving electrokinetic characteristics of bare surfaces, such as mica, silicon, glass etc. obtained from various types of electrokinetic cells. The surface conductivity effect on zeta potential is underlined. In the next section, various theoretical approaches, proposed to determine a distribution of electrostatic potential and flow distribution within macroion layers, are presented. Accordingly, the influence of the uniform as well as non-uniform distribution of charges within macroion layer, the dissociation degree, and the surface conductance on electrokinetic parameters are discussed. The principles, the advantages and limits of optical techniques as well as AFM are briefly outlined in Section 4. The last section is devoted to the discussion of experimental data obtained by streaming potential/current measurements and optical methods, such as reflectometry, ellipsometry, surface plasmon resonance (SPR), optical waveguide lightmode spectroscopy (OWLS), colloid enhancement, and fluorescence technique, for mono- and multilayers of macroions. Results of polycations (PEI, PAMAM dendrimers, PAH, PDADMAC) and polyanions (PAA, PSS) adsorption on mica, silicon, gold, and PTFE are quantitatively interpreted in terms of theoretical approaches postulating the three dimensional charge distribution or the random sequential adsorption model (RSA). Macroion bilayer formation, experimentally examined by streaming current measurements, and theoretically interpreted in terms of the comprehensive formalism is also reviewed. The utility of electrokinetic measurements, combined with optical methods, for a precise, in situ characteristics of macroion mono- and multilayer formation at solid/liquid interfaces is pointed out.