Structure formation in casein-based gels, foams, and emulsions

Physical stability, microstructure and interfacial properties of solid-oil-in-water (S/O/W) emulsions stabilized by sodium caseinate/xanthan gum complexes

Calcium carbonate (CaCO₃) has poor suspension stability, which severely limits its application in food processing and products. In this study, sodium caseinate (NaCas) and sodium caseinate (NaCas)-xanthan gum (XG) mixtures were compared for the stable preparation of solid/oil/water (S/O/W) emulsions for the delivery of calcium carbonate (CaCO₃) to solve the problem of poor suspension stability. The physical stability, particle size distribution, and microstructure of S/O/W emulsions were investigated to prove the successful construction of the system. The dynamic surface pressure and surface swelling properties of 2.0 wt% NaCas with different concentrations of XG were investigated to clarify the effect of interfacial properties of NaCas-XG mixtures on the emulsion stability of S/O/W emulsions. The results showed that the addition of XG resulted in enhanced physical stability, reduced particle size distribution, and enhanced encapsulation effect of the emulsion, forming a more three-dimensional core-shell structure via dendritic links. XG had a significant effect on the dynamic properties of the NaCas adsorption membrane: NaCas interacted with XG and the diffusion (k_diff) of NaCas to the interface decreased in short adsorption time, thus limiting the protein adsorption effectiveness; the presence of XG reduced the penetration (k_P) and rearrangement (k_R) rates at the interface during long adsorption times. Meanwhile, the NaCas-XG mixture has a high swelling elasticity. The results of this study can be used to improve the quality of related emulsion products or to prepare delivery systems for bioactive compounds.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Ultrasonic-assisted pH shift-induced interfacial remodeling for enhancing the emulsifying and foaming properties of perilla protein isolate

In order to expand the applications of plant protein in food formulations, enhancement of its functionalities is meaningful. Herein, the effects of ultrasonic (20 KHz, 400 W, 20 min)-assisted pH shift (pH 10 and 12) treatment on the structure, interfacial behaviors, as well as the emulsifying and foaming properties of perilla protein isolate (PPI) were investigated. Results showed that the solubility of PPI treated by ultrasonic-assisted pH shift (named UPPI-10/12) exceeded 90 %, which was at least 2 and 1.4 times that of untreated PPI and ultrasound-based PPI. Meanwhile, UPPI-10/12 possessed higher foamability (increasing by at least 1.2 times) and good emulsifying stability. Ultrasonic-assisted pH shift treatment decomposed large PPI aggregates into tiny particles, evident from the dynamic light scattering (DLS) and atomic force microscopy results. Besides, this approach induced a decrease in α-helix of PPI and an increase in β-sheet, which might result in the exposure of the hydrophobic group on the structural surface of PPI, thus leading to the increase of surface hydrophobicity. The smaller size and higher hydrophobicity endowed UPPI-10/12 faster adsorption rate, tighter interfacial structure, and higher elastic modulus at the air- and oil-water interfaces, evident from the cryo-SEM and interfacial dilatational rheological results. Thus, the emulsifying and foaming properties could evidently enhance. This study demonstrated that ultrasonic-assisted pH shift technique was a simple approach to effectively improve the functional performance of PPI.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.

Effect of bacterial cellulose nanofibers incorporation on acid-induced casein gels: microstructures and rheological properties

In this study, the effect of bacterial cellulose nanofibers (BCNF) incorporation on the structural and rheological properties of casein gels was investigated, where the mixed BCNF and casein gels were prepared by adding gluconic acid δ-lactone (GDL) to acidify the mixed polymer solutions at 3.0% casein concentration (w/v) and varying BCNF concentrations (0–0.5%, w/v). By changing the addition amount of GDL, the mechanical and structural properties of the mixed gels were studied at above, near and below the electric point (pI) of the casein. At pH above the pI of the casein, the introduction of BCNF initially increased the gel strength, but further addition of BCNF weakened the mixed gels. At near and below the pI of the casein, the incorporation of BCNF continuously increased the gel strength. Besides, all gels showed good structural homogeneity, without macroscopic phase separation occurring, which indicated good compatibility of BCNF with the casein gels.

Acid-induced mixed methylcellulose and casein gels: Structures, physical properties and formation mechanism

In this study, caseins and methylcellulose (MC) were selected as building materials to prepare a class of mixed gels by adding glucono-δ-lactone (GDL) to induce the gelation of composite MC/casein systems, where the casein concentration was fixed at 8.0% (w/v) and the MC concentration varied from 0 to 1.0% (w/v). It was found that with increasing amount of MC addition (0-0.4%), the mixed gels exhibited a structural conversion from a casein-dominant gel network to a "water-in-water emulsion structure", with the caseins as the continuous gelling phase and the MC as the dispersed phase; further MC addition (0.4-1.0%, w/v) caused a more significant phase separation phenomenon. The structural conversion was in consistent with the determination result of gel hardness. Furthermore, by a combination of confocal laser scanning microscope (CLSM) and rheological studies, the structural evolution process of the mixed gels was revealed to explore the underlying formation mechanism of the mixed gels.

Investigating casein gel structure during gastric digestion using ultra-small and small-angle neutron scattering

This study aimed to understand the structural devolution of 10% w/w rennet-induced (RG) and transglutaminase-induced acid (TG) gels in H₂O and D₂O under in vitro gastric conditions with and without pepsin. The real-time devolution of structure at a nano- (e.g. colloidal calcium phosphate (CCP) and micelle) and micro- (gel network) level was determined using ultra-small (USANS) and small-angle neutron scattering (SANS) with electron microscopy. Results demonstrate that gel firmness or elasticity determines disintegration behaviour during simulated mastication and consequently the particle size entering the stomach. Shear of mixing in the stomach, pH, and enzyme activity will also affect the digestion process. Our results suggest that shear of mixing primarily results in erosion at the particle surface and governs gel disintegration behaviour during the early stages of digestion. Pepsin diffusivity, and hence action, occur more readily in the latter stages of gastric digestion via access to the particle interior. This occurs via the progressively larger pores of the looser gel network and channels created within the larger, less dense casein micelles of the RG gels. Gel firmness and brittleness were greater in the D₂O samples compared to H₂O, facilitating gel disintegration. Despite the higher strength and elasticity of RG compared to TG, the protein network strands of the RG gels become more compact when exposed to the acidic gastric environment with comparatively larger pores observed through SEM imaging. This led to a higher degree of digestibility in RG gels compared to TG gels. This is the first study to examine casein gel structure during simulated gastric digestion using scattering and highlights the benefits of neutron scattering to monitor structural changes during digestion at multiple length scales.

Impact of Type of Sugar Beet Pectin-Sodium Caseinate Interaction on Emulsion Properties at pH 4.5 and pH 7

Equal parts of sugar beet pectin and sodium caseinate were interacted through electrostatic attraction, enzymatic crosslinking, and the Maillard reaction to prepare three oil-in-water emulsifier systems. Oil-in-water emulsions (10%) were processed via high shear overhead mixing at the natural pH of the emulsifier systems, followed by pH adjustment to pH 4.5 and pH 7. The emulsions were stable against coalescence, except for a slight increase in the mean droplet size for the enzymatic cross-liked emulsion at pH 4.5 over a 14-day storage period. This emulsion also showed the lowest absolute zeta (ζ)-potential value of near 30 mV. The Maillard interaction emulsifier system resulted in larger droplet sizes compared to the other two emulsifier systems. Small deformation oscillatory shear rheology assessment of the emulsion cream phases revealed an impact of the emulsifier system design at pH 4.5.

Heat stability of emulsions using functionalized milk protein concentrate generated by supercritical fluid extrusion

In this study, thermostable oil-in-water emulsions containing high protein contents were developed using milk protein concentrate (MPC) that was functionalized by supercritical fluid extrusion (SCFX) processing at low temperature and shear. Functionalized MPC (f-MPC) emulsions (3% protein-80% oil and 10% protein-50% oil) were compared with emulsions stabilized by commercial MPC (c-MPC), sodium caseinate (NaCas), and a commercial mayonnaise for their emulsifying properties and heat stability at 70 and 90 °C for 30 min, and 121 °C for 15 min. Zeta-potentials and interfacial protein concentrations of f-MPC emulsions were higher than that of c-MPC emulsions. f-MPC emulsions remained stable against creaming for at least 8 weeks at room temperature (23 °C), while their c-MPC counterparts showed significant creaming at the same conditions. Even after heating at 121 °C for 15 min, f-MPC emulsions retained their structural integrity as observed from their confocal images, droplet size distributions, and viscosities. In contrast, c-MPC emulsions and mayonnaise disintegrated upon heating at 121 °C for 15 min, and oil droplets of mayonnaise partially coalesced during heating at 90 °C for 30 min. f-MPC emulsions revealed higher viscosities compared to c-MPC emulsions, providing them improved stability. Viscosities of f-MPC emulsions were not significantly affected by heating at 90 °C for 30 min, while other emulsions exhibited a substantial increase in their viscosities due to protein denaturation and aggregation. Thus, f-MPC emulsions can be utilized in the development of protein-enriched functional foods (e.g., spreads) that are stable against high heat treatments.

Renewable Polysaccharides Micro/Nanostructures for Food and Cosmetic Applications

The worldwide diffusion of nanotechnologies into products nowadays has completely revolutionized human life, providing novel comfort and benefits. Their inclusion in food and cosmetic has a heavy impact over the market, allowing the development of higher value products with enhanced properties. Natural origin polymers and in particular polysaccharides represent a versatile platform of materials for the development of micro/nanostructured additives for food and cosmetic products due to their chemical versatility, biocompatibility, and abundance. Here, we review the current applications of polysaccharides-based micro/nanostructures, taking into consideration the precursors' production, isolation, and extraction methods and highlighting the advantages, possible drawbacks, and market diffusion.

Rheology of protein-stabilised emulsion gels envisioned as composite networks 1- Comparison of pure droplet gels and protein gels

HYPOTHESIS

Protein-stabilised emulsion gels can be studied in the theoretical framework of colloidal gels, because both protein assemblies and droplets may be considered as soft colloids. These particles differ in their nature, size and softness, and these differences may have an influence on the rheological properties of the gels they form.

EXPERIMENTS

Pure gels made of milk proteins (sodium caseinate), or of sub-micron protein-stabilised droplets, were prepared by slow acidification of suspensions at various concentrations. Their microstructure was characterised, their viscoelasticity, both in the linear and non-linear regime, and their frequency dependence were measured, and the behaviour of the two types of gels was compared.

FINDINGS

Protein gels and droplet gels were found to have broadly similar microstructure and rheological properties when compared at fixed volume fraction, a parameter derived from the study of the viscosity of the suspensions formed by proteins and by droplets. The viscoelasticity displayed a power law behaviour in concentration, as did the storage modulus in frequency. Additionally, strain hardening was found to occur at low concentration. These behaviours differed slightly between protein gels and droplet gels, showing that some specific properties of the primary colloidal particles play a role in the development of the rheological properties of the gels.

Fabrication of Concentrated Palm Olein-Based Diacylglycerol Oil-Soybean Oil Blend Oil-In-Water Emulsion: In-Depth Study of the Rheological Properties and Storage Stability

The present study focused on investigating the storage stability of oil-in-water (O/W) emulsions with high oil volume fractions prepared with palm olein-based diacylglycerol oil (POL-DAG)/soybean oil (SBO) blends at 25 °C. The incorporation of different ratios of oil blends significantly influenced (p < 0.05) the texture, color, droplet size distribution, and rheological parameters of the emulsions. Only emulsions incorporated with 10% to 20% POL-DAG in oil phase exhibited pseudoplastic behavior that fitted the Power Law model well. Furthermore, the O/W emulsions prepared with POL-DAG/SBO blends exhibited elastic properties, with G’ higher than G”. During storage, the emulsion was found to be less solid-like with the increase in tan δ values. All emulsions produced with POL-DAG/SBO blends also showed thixotropic behavior. Optical microscopy revealed that the POL-DAG incorporation above 40% caused aggregated droplets to coalesce and flocculate and, thus, larger droplet sizes were observed. The current results demonstrated that the 20% POL-DAG substituted emulsion was more stable than the control emulsion. The valuable insights gained from this study would be able to generate a lot more possible applications using POL-DAG, which could further sustain the competitiveness of the palm oil industry.

Sodium caseinate as a particulate emulsifier for making indefinitely recycled pH-responsive emulsions

pH-responsive emulsions are one of the simplest and most readily implementable stimuli-responsive systems. However, their practical uses have been greatly hindered by cyclability. Here, we report a robust pH-responsive emulsion prepared by utilizing pure sodium caseinate (NaCas) as the sole emulsifier. We demonstrate that the emulsification/demulsification of the obtained NaCas-stabilized emulsion can be triggered by simply changing the pH value over 100 cycles, which has never been observed in any protein-stabilized emulsion system. The NaCas-stabilized emulsion maintains its pH-responsive properties even in a saturated salt solution (NaCl ∼ 6.1 M) or seawater. We illustrate how NaCas functions in pH-responsive emulsions and show that when conventional nanoparticles such as zein protein or bare SiO₂ particles were coated with a layer of NaCas, the resulting formulated emulsions could be switched on and off over 10 cycles. The unique properties of NaCas thus enable the engineering of conventional Pickering emulsions to pH-responsive Pickering emulsions. Finally, we have integrated catalytically active gold (Au) nanoclusters (NCs) into the NaCas protein and then utilized them to produce emulsions. Remarkably, these NaCas-Au NCs assembled at the oil-water interface exhibited excellent catalytic activity and cyclability, not only in aqueous solution, but also in complicated seawater environments.

Caseinate-Stabilized Emulsions of Black Cumin and Tamanu Oils: Preparation, Characterization and Antibacterial Activity

Caseinate-stabilized emulsions of black cumin (Nigella sativa) and tamanu (Calophyllum inophyllum) oils were studied in terms of preparation, characterization, and antibacterial properties. The oils were described while using their basic characteristics, including fatty acid composition and scavenging activity. The oil-in-water (o/w) emulsions containing the studied oils were formulated, and the influence of protein stabilizer (sodium caseinate (CAS), 1-12 wt%), oil contents (5-30 wt%), and emulsification methods (high-shear homogenization vs sonication) on the emulsion properties were investigated. It was observed that, under both preparation methods, emulsions of small, initial droplet sizes were predominantly formed with CAS content that was higher than 7.5 wt%. Sonication was a more efficient emulsification procedure and was afforded emulsions with smaller droplet size throughout the entire used concentration ranges of oils and CAS when compared to high-shear homogenization. At native pH of ~ 6.5, all of the emulsions exhibited negative zeta potential that originated from the presence of caseinate. The antibacterial activities of both oils and their emulsions were investigated with respect to the growth suppression of common spoilage bacteria while using the disk diffusion method. The oils and selected emulsions were proven to act against gram positive strains, mainly against Staphylococcus aureus (S. aureus) and Bacillus cereus (B. cereus); regrettably, the gram negative species were fully resistant against their action.

Effect of Ohmic heating on functionality of sodium caseinate - A relationship with protein gelation

Sodium caseinate (NaCAS) is widely used in the food industry to provide nutritional and functional benefits. This work deals with the effects of applying moderate electric fields (MEF) of different intensity - ranging from 2 V·cm^-1 to 17 V·cm^-1 - on the physical and functional properties of NaCAS solutions during Ohmic heating (OH) at 95 °C. Self-standing gels were produced regardless the heating technique applied (i.e. conventional or OH), and these gels were much more prone to physical rupture when compared with the ones produced from unheated NaCAS. Interestingly, OH treatment formed gels with lower values of strain at rupture and water holding capacity than unheated samples; this pattern was not observed for gels obtained through the conventional heating treatment (at 0 V·cm^-1). These effects may be linked with disturbances of the distribution of random coil structures and enhanced solubility of NaCAS at its isoelectric point, reducing aggregation and impairing the development of a more compact protein network. Results show that OH presents potential to be used as volumetric heating tool for NaCAS solubilization and for the production of distinctive acidified systems.

Molecular Dynamics Simulation of Protein Biosurfactants

Surfaces and interfaces are ubiquitous in nature and are involved in many biological processes. Due to this, natural organisms have evolved a number of methods to control interfacial and surface properties. Many of these methods involve the use of specialised protein biosurfactants, which due to the competing demands of high surface activity, biocompatibility, and low solution aggregation may take structures that differ from the traditional head–tail structure of small molecule surfactants. As well as their biological functions, these proteins have also attracted interest for industrial applications, in areas including food technology, surface modification, and drug delivery. To understand the biological functions and technological applications of protein biosurfactants, it is necessary to have a molecular level description of their behaviour, in particular at surfaces and interfaces, for which molecular simulation is well suited to investigate. In this review, we will give an overview of simulation studies of a number of examples of protein biosurfactants (hydrophobins, surfactin, and ranaspumin). We will also outline some of the key challenges and future directions for molecular simulation in the investigation of protein biosurfactants and how this can help guide future developments.

High solids emulsions produced by ultrasound as a function of energy density

The use of emulsifying methods is frequently required before spray drying food ingredients, where using high concentration of solids increases the drying process yield. In this work, we used ultrasound to obtain kinetically stable palm oil-in-water emulsions with 30g solids/100g of emulsion. Sodium caseinate, maltodextrin and dried glucose syrup were used as stabilizing agents. Sonication time of 3, 7 and 11min were evaluated at power of 72, 105 and 148W (which represents 50%, 75% and 100% of power amplitude in relation to the nominal power of the equipment). Energy density required for each assay was calculated. Emulsions were characterized for droplets mean diameter and size distribution, optical microscopy, confocal microscopy, ζ-potential, creaming index (CI) and rheological behavior. Emulsions presented bimodal size distribution, with D_[3,2] ranging from 0.7 to 1.4μm and CI between 5% and 12%, being these parameters inversely proportional to sonication time and power, but with a visual kinetically stabilization after the treatment at 148W at 7min sonication. D_[3,2] showed to depend of energy density as a power function. Sonication presented as an effective method to be integrated to spray drying when emulsification is needed before the drying process.

Effect of 2,2-azobis (2-amidinopropane) dihydrochloride oxidized casein on the microstructure and microrheology properties of emulsions

The impacts of protein oxidation on the droplet size and microrheology properties of casein emulsions with 20% oil content were investigated. The degree of protein oxidation was indicated by carbonyl concentration. The droplets in the emulsions of different-oxidation-degree casein had bimodal distribution, but their size altered due to oxidation. The effects of protein oxidation on the morphology, motion type, viscoelasticity, and stability of droplets were also investigated by microrheology analysis. The droplet motion was blocked by protein oxidation due to mean square displacement slope results. Solid-liquid balance values provided the liquid behavior dominating these emulsions. Oxidation of carbonyl concentration 16.72 raised the primary droplets, increased the elasticity, decreased the viscosity, and promoted the droplet motion rate, resulting in better stability of emulsions. Further oxidation promoted the aggregation of droplets and resulted in poor stability.