Effects of the PEG molecular weight of a PEG-lipid and cholesterol on PEG chain flexibility on liposome surfaces

AMPLON: Amplifying DNA with Multiarm Priming and Looping Optimization of Nucleic Acid

Nucleic acid amplification, the bedrock of biotechnology and molecular diagnostics, surges in applications-especially isothermal approaches-heightening the demand for advanced and precisely engineered methods. Here, a novel approach for amplifying DNA with multiarm priming and looping optimization of nucleic acid (AMPLON) is presented. AMPLON relies on a novel polymeric material with unique set of multiarm polyethylene glycol-DNA primers for efficient DNA amplification under isothermal conditions. Each arm carries single-stranded DNA complementing the sense or antisense sequence of the target DNA. The amplification reaction begins with antisense arms binding to the target DNA, forming a template for sense-carrying arms to direct multiarm large DNA amplicon synthesis through successive DNA looping and unlooping steps. Using human immunodeficiency virus type 1 (HIV-1) as a model clinical target, AMPLON exhibits high sensitivity, detecting target concentrations as low as 100 copies mL-1. Compared to a quantitative real-time polymerase chain reaction assay using sensitive primers, AMPLON reliably identifies HIV-1 RNA in plasma samples (n = 20) with a significant agreement rate of 95%. With its ability to achieve highly specific and sensitive target amplification within 30 min, AMPLON holds immense potential to transform the field of nucleic acid research and unleashing new possibilities in medicine and biotechnology.

Insight into the liposomal encapsulation of mono and bis-naphthalimides

Mitonafide-loaded liposomes are a promising strategy to overcome the neurotoxicity observed in clinical trials for this drug. This study investigates the influence of loaded mitonafide or a dimer analogue on different liposomal formulations and their therapeutic efficacy in vitro. Physicochemical properties of the liposomes were manipulated using different loading methods (namely bilayer or core loading) and varying the rigidity of the bilayer using distinct phospholipid compositions. Our results demonstrated that the mitonafide dimer analogue had a comparable encapsulation efficiency (EE%) into the liposomes when loaded into rigid or flexible bilayers in contrast to the low mitonafide monomer EE%. A pH gradient core loading method resulted in a more efficient mechanism to load the monomer into the liposomes. DOSY NMR and spectrofluorometric studies revealed key differences in the structure of the vesicles and the arrangement of the monomer or the dimer in the bilayer or the core of the liposomes. The in vitro assessment of the formulations using MDA-MB-231 and RT-112 cells revealed that a flexible lipid bilayer allows a faster drug release, which correlated well with the spectroscopy studies. This study investigated for the first time that the characteristics of the lipid bilayer and the loading method influence the encapsulation efficacy, colloidal properties, photoactivity and stability of mono and bis-naphthalimides loaded in a liposomal carrier, essential factors that will impact the performance of the formulation in a biological scenario.

Gelled Liquid Crystal Nanocarriers for Improved Antioxidant Activity of Resveratrol

As many natural origin antioxidants, resveratrol is characterized by non-suitable physicochemical properties for its topical application. To allow its benefits to manifest on human skin, resveratrol has been entrapped within liquid crystal nanocarriers (LCNs) made up of glyceryl monooleate, a penetration enhancer, and DSPE-PEG 750. The nanosystems have been more deeply characterized by using dynamic light scattering and Turbiscan Lab® Expert optical analyzer, and they have been tested in vitro on NCTC 2544. The improved antioxidant activity of entrapped resveratrol was evaluated on keratinocyte cells as a function of its concentration. Finally, to really propose the resveratrol-loaded LCNs for topical use, the systems were gelled by using two different gelling agents, poloxamer P407 and carboxymethyl cellulose, to improve the contact time between skin and formulation. The rheological features of obtained gels were evaluated using two important methods (microrheology at rest and dynamic rheology), before testing their safety profile on human healthy volunteers. The obtained results showed the ability of LCNs to improve antioxidant activity of RSV and the gelled LCNs showed good rheological profiles. In conclusion, the results confirmed the potentiality of gelled resveratrol-loaded nanosystems for skin disease, mainly related to their antioxidant effects.

Effects of silica surface modification with silane and poly(ethylene glycol) on flexural strength, protein-repellent, and antibacterial properties of acrylic dental nanocomposites

OBJECTIVE

The main aim of the current work was to develop dental acrylic-based composites with protein-repellent and antibacterial properties by using surface-modified silica nanoparticles. The effects of surface modification of silica nanoparticles in protein-repellent and antibacterial activity and mechanical properties of dental composites including flexural strength, flexural modulus, and hardness were discussed.

METHODS

The surface of silica nanoparticles was first chemically treated with 3-methacryloxypropyltrimethoxysilane (MPS) as a coupling agent and then with poly(ethylene glycol) (PEG) bonded to MPS. Dental acrylic-based composites were prepared with mass fractions of 10, 15, 20, 30, and 40 % of PEG-modified MPS-silica nanoparticles (PMS). The chemical surface modification of silica nanoparticles with MPS and PEG was confirmed by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA).

RESULTS

The dental composite containing 20 wt% PMS nanoparticles could reduce the protein adsorption by 28 % as compared with a composite containing 20 wt% MPS-modified silica. The antibacterial test indicated that the PMS nanoparticles can significantly reduce the adhesion of Streptococcus mutans and the biofilm formation on the surface of dental composites. It was found that the flexural strength increased by increasing the PMS nanoparticles from 0 to 20 wt% and then decreased by the incorporation of higher percentages of these nanoparticles. Also, with increasing the weight percentage of PMS nanoparticles, the elastic and the flexural modulus and the hardness of resin nanocomposites were increased.

SIGNIFICANCE

In the current work, for the first time, dental resin composites containing PEG were prepared with excellent protein-repellent and antibacterial properties.

Molecular-Level Structural Analysis of siRNA-Loaded Lipid Nanoparticles by 1H NMR Relaxometry: Impact of Lipid Composition on Their Structural Properties

1H NMR relaxometry was applied for molecular-level structural analysis of siRNA-loaded lipid nanoparticles (LNPs) to clarify the impact of the neutral lipids, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and cholesterol, on the physicochemical properties of LNP. Incorporating DSPC and cholesterol in ionizable lipid-based LNP decreased the molecular mobility of ionizable lipids. DSPC reduced the overall molecular mobility of ionizable lipids, while cholesterol specifically decreased the mobility of the hydrophobic tails of ionizable lipids, suggesting that cholesterol filled the gap between the hydrophobic tails of ionizable lipids. The decrease in molecular mobility and change in orientation of lipid mixtures contributed to the maintenance of the stacked bilayer structure of siRNA and ionizable lipids, thereby increasing the siRNA encapsulation efficiency. Furthermore, NMR relaxometry revealed that incorporating those neutral lipids enhanced PEG chain flexibility at the LNP interface. Notably, a small amount of DSPC effectively increased PEG chain flexibility, possibly contributing to the improved dispersion stability and narrower size distribution of LNPs. However, cryogenic transmission electron microscopy represented that adding excess amounts of DSPC and cholesterol into LNP resulted in the formation of deformed particles and demixing cholesterol within the LNP, respectively. The optimal lipid composition of ionizable lipid-based LNPs in terms of siRNA encapsulation efficiency and PEG chain flexibility was rationalized based on the molecular-level characterization of LNPs. Moreover, the NMR relaxation rate of tertiary amine protons of ionizable lipids, which are the interaction site with siRNA, can be a valuable indicator of the encapsulated amount of siRNA within LNPs. Thus, NMR-based analysis can be a powerful tool for efficiently designing LNP formulations and their quality control based on the molecular-level elucidation of the physicochemical properties of LNPs.

Preparation and Characterization of Bio-Based PLA/PEG/g-C3N4 Low-Temperature Composite Phase Change Energy Storage Materials

As energy and environmental issues become more prominent, people must find sustainable, green development paths. Bio-based polymeric phase change energy storage materials provide solutions to cope with these problems. Therefore, in this paper, a fully degradable polyethylene glycol (PEG20000)/polylactic acid (PLA)/g-C₃N₄ composite phase change energy storage material (CPCM) was obtained by confinement. The CPCM was characterized by FTIR and SEM for compatibility, XRD and nanoindentation for mechanical properties and DSC, LFA, and TG for thermal properties. The results showed that the CPCM was physical co-mingling; when PLA: PEG: g-C₃N₄ was 6:3:1, the consistency was good. PEG destroys the crystallization of PLA and causes the hardness to decrease. When PLA: PEG: g-C₃N₄ was 6: 3: 1, it had a maximum hardness of 0.137 GPa. The CPCM had a high latent enthalpy, and endothermic and exothermic enthalpies of 106.1 kJ/kg and 80.05 kJ/kg for the PLA: PEG: g-C₃N₄ of 3: 6: 1. The CPCM showed an increased thermal conductivity compared to PLA, reaching 0.30 W/(m·K),0.32 W/(m·K) when PLA: PEG: g-C₃N₄ was 6: 3: 1 and when PLA: PEG: g-C₃N₄ was 3: 6: 1, respectively. Additionally, the CPCM was stable within 250 °C, indicating a wide appliable temperature range. The CPCM can be applied to solar thermal power generation, transportation, and building construction.

Influence of Surface-Modification via PEGylation or Chitosanization of Lipidic Nanocarriers on In Vivo Pharmacokinetic/Pharmacodynamic Profiles of Apixaban

Nanostructured lipid carriers (NLCs) have been proven to significantly improve the bioavailability and efficacy of many drugs; however, they still have many limitations. These limitations could hinder their potential for enhancing the bioavailability of poorly water-soluble drugs and, therefore, require further amendments. From this perspective, we have investigated how the chitosanization and PEGylation of NLCs affected their ability to function as a delivery system for apixaban (APX). These surface modifications could enhance the ability of NLCs to improve the bioavailability and pharmacodynamic activity of the loaded drug. In vitro and in vivo studies were carried out to examine APX-loaded NLCs, chitosan-modified NLCs, and PEGylated NLCs. The three nanoarchitectures displayed a Higuchi-diffusion release pattern in vitro, in addition to having their vesicular outline proven via electron microscopy. PEGylated and chitosanized NLCs retained good stability over 3 months, versus the nonPEGylated and nonchitosanized NLCs. Interestingly, APX-loaded chitosan-modified NLCs displayed better stability than the APX-loaded PEGylated NLCs, in terms of mean vesicle size after 90 days. On the other hand, the absorption profile of APX (AUC_0-inf) in rats pretreated with APX-loaded PEGylated NLCs (108.59 µg·mL^-1·h^-1) was significantly higher than the AUC_0-inf of APX in rats pretreated with APX-loaded chitosan-modified NLCs (93.397 µg·mL^-1·h^-1), and both were also significantly higher than AUC_0-inf of APX-Loaded NLCs (55.435 µg·mL^-1·h^-1). Chitosan-coated NLCs enhanced APX anticoagulant activity with increased prothrombin time and activated partial thromboplastin time by 1.6- and 1.55-folds, respectively, compared to unmodified NLCs, and by 1.23- and 1.37-folds, respectively, compared to PEGylated NLCs. The PEGylation and chitosanization of NLCs enhanced the bioavailability and anticoagulant activity of APX over the nonmodified NLCs; this highlighted the importance of both approaches.

An electrochemical biosensor for HER2 detection in complex biological media based on two antifouling materials of designed recognizing peptide and PEG

A simple tactic for electrochemical determination of a typical biomarker for breast cancer, human epidermal growth factor receptor 2 (HER2), was presented via the construction of a low fouling sensing interface functionalized with polyethylene glycol (PEG) and peptide. The HER2 biosensor was developed based on an electrode modified by the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) and Au nanoparticles (AuNPs) as the sensing substrate, and followed by the immobilization of an antifouling PEG and a peptide with both recognizing and antifouling properties. Thanks to the combined antifouling effect of the PEG and peptide, and the specific recognizing ability of the peptide to the target HER2, the developed electrochemical biosensor exhibited strong antifouling performances in complex biofluids, such as human blood and serum, and it was capable of assaying target HER2 within a very wide linear range (1.0 pg mL^-1 to 1.0 μg mL^-1), with an ultralow limit of detection (0.44 pg mL^-1). The combination of two kinds of antifouling biomaterials (PEG and peptide) offered an effective strategy for the development of low fouling sensing platforms suitable for practical assay in complex biotic environments.

Understanding the rod-to-tube transformation of self-assembled ascorbyl dipalmitate lipid nanoparticles stabilized with PEGylated lipids

We previously established a nanoparticle-based drug delivery system (DDS) for high-dose ascorbic acid therapy by self-assembly of a lipid-modified ascorbic acid derivative, L-ascorbyl 2,6-dipalmitate (ASC-DP). The particles' morphology should be modified for effective DDSs. Here, we modulated the morphology of self-assembled ASC-DP nanoparticles using two different PEGylated lipids, distearoylphosphatidylethanolamine-polyethylene glycol (DSPE-PEG) and cholesterol-polyethylene glycol (Chol-PEG), with various PEG molecular weights. At the preparation molar ratio of 10 : 1 (ASC-DP/PEGylated lipid), rod-like nanoparticles emerged in the ASC-DP/DSPE-PEG system, whereas the ASC-DP/Chol-PEG system yielded tube-like nanoparticles. The internal structures of both rod-like ASC-DP/DSPE-PEG and tube-like ASC-DP/Chol-PEG nanoparticles were similar to that of repeated ASC-DP bilayers. The particles' surfaces featured PEGylated lipids, which stabilized the structure and dispersion of the nanoparticles. For both systems, the particle size increased slightly with increasing the PEGylated lipid's PEG molecular weight. Increasing the PEG molecular weight decreased the inner tunnel size of tube-like ASC-DP/Chol-PEG nanoparticles. A mechanism has been proposed for the rod-to-tube transformation. Surface-layer free-energy changes owing to the mixing of multiple lipids and PEG chain repulsion are thought to underlie the inner tunnels' formation. The rod-to-tube morphology of self-assembled ASC-DP nanoparticles can be modulated by controlling the PEGylated lipids' structure, including the lipid species and the PEG chain length.

Indocyanine green conjugated phototheranostic nanoparticle for photodiagnosis and photodynamic reaciton

BACKGROUND

Phototheranostics represents a highly promising paradigm for cancer therapy, although selecting an appropriate optical imager and sensitizer for clinical use remains challenging.

METHODS

Liposomally formulated phospholipid-conjugated indocyanine green, denoted as LP-iDOPE, was developed as phototheranostic nanoparticle and its cancer imaging-mediated photodynamic reaction, defined as the immune response induced by photodynamic and photothermal effects, was evaluated with a near-infrared (NIR)-light emitting diode (LED) light irradiator.

RESULTS

Using in vivo NIR fluorescence imaging, we demonstrated that LP-iDOPE was selectively delivered to tumor sites with high accumulation and a long half-life. Following low-intensity NIR-LED light irradiation on the tumor region of LP-iDOPE accumulated, effector CD8⁺ T cells were activated at the secondary lymphoid organs, migrated, and subsequently released cytokines including interferon-γ and tumor necrosis factor-α, resulting in effective tumor regression.

CONCLUSIONS

Our anti-cancer strategy based on tumor-specific LP-iDOPE accumulation and low-intensity NIR-LED light irradiation to the tumor regions, i.e., photodynamic reaction, represents a promising approach to noninvasive cancer therapy.

Protein-liposome interactions: the impact of surface charge and fluidisation effect on protein binding

At the dawn of a new nanotechnological era in the pharmaceutical field, it is very important to examine and understand all the aspects that influence in vivo behaviour of nanoparticles. In this point of view, the interactions between serum proteins and liposomes with incorporated anionic, cationic, and/or PEGylated lipids were investigated to elucidate the role of surface charge and bilayer fluidity in protein corona's formation. 1,2-dipalmitoyl-sn-glycero-3- phosphocholine (DPPC), hydrogenated soybean phosphatidylcholine (HSPC), and 1,2-dioctadecanoyl-sn-glycero-3-phosphocholine (DSPC) liposomes with the presence or absence of 1,2-dipalmitoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (sodium salt) (DPPG), 1,2-di-(9Z-octadecenoyl)-3-trimethylammonium-propane (chloride salt) (DOTAP), and/or 1,2-dipalmitoylsn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-5000] (DPPE-PEG 5000) lipids were prepared by the thin-film hydration method. The evaluation of their biophysical characteristics was enabled by differential scanning calorimetry and dynamic and electrophoretic light scattering. The physicochemical characteristics of mixed liposomes were compared before and after exposure to foetal bovine serum (FBS) and were correlated to calorimetric data. Our results indicate protein binding to all liposomal formulations. However, it is highlighted the importance of surface charge and fluidisation effect to the extent of protein adsorption. Additionally, considering the extensive use of cationic lipids for innovative delivery platforms, we deem PEGylation a key parameter, because even in a small proportion can reduce protein binding, and thus fast clearance and extreme toxicity without affecting positive charge. This study is a continuation of our previous work about protein-liposome interactions and fraction of stealthiness (Fs) parameter, and hopefully a design road map for drug and gene delivery.

Predictive high-throughput screening of PEGylated lipids in oligonucleotide-loaded lipid nanoparticles for neuronal gene silencing

Lipid nanoparticles (LNPs) are gaining traction in the field of nucleic acid delivery following the success of two mRNA vaccines against COVID-19. As one of the constituent lipids on LNP surfaces, PEGylated lipids (PEG-lipids) play an important role in defining LNP physicochemical properties and biological interactions. Previous studies indicate that LNP performance is modulated by tuning PEG-lipid parameters including PEG size and architecture, carbon tail type and length, as well as the PEG-lipid molar ratio in LNPs. Owing to these numerous degrees of freedom, a high-throughput approach is necessary to fully understand LNP behavioral trends over a broad range of PEG-lipid variables. To this end, we report a low-volume, automated, high-throughput screening (HTS) workflow for the preparation, characterization, and in vitro assessment of LNPs loaded with a therapeutic antisense oligonucleotide (ASO). A library of 54 ASO-LNP formulations with distinct PEG-lipid compositions was prepared using a liquid handling robot and assessed for their physiochemical properties as well as gene silencing efficacy in murine cortical neurons. Our results show that the molar ratio of anionic PEG-lipid in LNPs regulates particle size and PEG-lipid carbon tail length controls ASO-LNP gene silencing activity. ASO-LNPs formulated using PEG-lipids with optimal carbon tail lengths achieved up to 5-fold lower mRNA expression in neurons as compared to naked ASO. Representative ASO-LNP formulations were further characterized using dose-response curves and small-angle X-ray scattering to understand structure-activity relationships. Identified hits were also tested for efficacy in primary murine microglia and were scaled-up using a microfluidic formulation technique, demonstrating a smooth translation of ASO-LNP properties and in vitro efficacy. The reported HTS workflow can be used to screen additional multivariate parameters of LNPs with significant time and material savings, therefore guiding the selection and scale-up of optimal formulations for nucleic acid delivery to a variety of cellular targets.

Bone-targeted nanoplatform enables efficient modulation of bone tumor microenvironment for prostate cancer bone metastasis treatment

As there is currently no effective therapy for patients with prostate cancer (PCa) bone metastasis, it was stringent to explore the relevant treatment strategies. Actually, the interaction between cancer cells and bone microenvironment plays important role in prostate cancer bone metastasis, especially the Sonic hedgehog protein (SHH) signaling in the bone microenvironment. The SHH promotes osteoblast maturation and osteoblast then secretes RANKL to induce osteoclastogenesis. Herein, this study develops bone-targeting calcium phosphate lipid hybrid nanoparticles (NPs) loaded with docetaxel (DTXL) and SHH siRNA for PCa bone metastasis treatment. For bone targeting purposes, the nanoplatform was modified with alendronate (ALN). (DTXL + siRNA)@NPs-ALN NPs effectively change the bone microenvironment by inhibiting the SHH paracrine and autocrine signaling, enhancing the anti-tumor effects of DTXL. Besides showing good in vitro cellular uptake, the NPs-ALN also inhibited tumor growth both in vitro and in vivo by inducing apoptosis, cell cycle arrest, and autophagy. This DDS comprised of (DTXL + siRNA)-loaded NPs provides an excellent strategy to treat PCa bone metastasis.

Enhanced circulation longevity and pharmacodynamics of metformin from surface-modified nanostructured lipid carriers based on solidified reverse micellar solutions

Metformin hydrochloride (MTH) has been associated with poor/incomplete absorption (50–60%), low bioavailability, short half-life (0.4–0.5 h), high dosage and dose-related side effects. To overcome these barriers and improve oral bioavailability and efficacy of MTH, surface-modified nanostructured lipid carriers (NLCs) were developed. Lipid matrices composed of rational blends of beeswax and Phospholipon® 90H (as solid lipids) and Capryol-PGE 860 (as liquid lipid) were prepared by fusion, and the resultant lipid matrices were PEGylated to give 10, 20 and 40% PEGylated lipid matrices. MTH-loaded non-PEGylated and PEGylated NLCs were prepared via high-shear hot homogenization and characterized regarding particle properties and physicochemical performance. The encapsulation efficiencies (EE%) and loading capacities (LC) of the MTH-loaded NLCs were determined while the in vitro drug release was evaluated in phosphate buffered saline (PBS, pH 7.4). Antidiabetic and pharmacokinetics properties of the NLCs were ascertained in an alloxan-induced diabetic rats model after oral administration. The MTH-loaded NLCs were nanomeric (particle size: 184.8–882.50 nm) with low polydispersity index (0.368–0.687) and zeta potential (26.5–34.2 mV), irregular shape, amorphous nature with reduced crystallinity. The EE% and LC were >90 % and 16%, respectively. The formulations showed >65 % release over 12 h in a greater sustained manner than marketed MTH formulation (Glucophage®) as well as enhanced pharmacokinetics properties and sustained blood glucose lowering effect, even at reduced doses with PEGylated NLCs than Glucophage®. Thus, PEGylated NLC is a promising approach for improved delivery and oral bioavailability of MTH thus encouraging further development of the formulation.

DHA loaded nanoliposomes stabilized by β-sitosterol: Preparation, characterization and release in vitro and vivo

DHA loaded nanoliposomes, stabilized by β-sitosterol, were prepared by thin film hydration-sonication method. The characteristics and membranes properties of DHA-NLs with different β-sitosterol content were measured. The samples with the same formulation were used to measure the resistance of environment stress and controlled release & absorption of DHA in vitro and in vivo. The results showed that the maximal encapsulation efficiency of DHA-NLs was (86.95 ± 0.95)%, when the ratio of soybean lecithin to β-sitosterol was 5:1. The particle size of all samples was within 200 nm and relative retention rate was more than 60% after 3 weeks storage. The area under the curve of DHA concentration of DHA-NLs and DHA-emulsion groups was 1.32 and 1.08, respectively. In summary, the nanoliposomes were promising to improve the absorption of DHA in form of ethyl ester.

Interaction of DPPC liposomes with cholesterol and food protein during in vitro digestion using Dynamic Light Scattering and FTIR spectroscopy analysis

The influence of cholesterol (CHO), bovine serum albumin (BSA) and lactoferrin (LF), on the phase transition temperature (T_m) and structure of DPPC liposomes during in vitro digestion was investigated using Dynamic Laser Scattering (DLS) and Fourier Transform Infrared Spectroscopy technologies (FTIR). CHO enhanced bilayers thickness and acyl chain order, especially in DPPC:CHO of 6:1, with the average size increase to 1.77 ± 0.20 μm and broaden of phase transition (T_m 45.8 °C). Protein critically impacted on the liposomal structure through formation of hydrogen bonds between in DPPC and protein. Liposomal size and T_m were significantly changed after simulated gastric digestion, whereas the pancreatic incubation can broaden transition phase and weaken functional groups of liposomes. Our data provided a better understanding on structure changes of CHO-containing membrane and protein addition by revealing T_m and chemical bonds details, and added to current knowledge for evaluating the different component on liposomal digestibility in food area.

Quantifying the effect of PEG architecture on nanoparticle ligand availability using DNA-PAINT

The importance of PEG architecture on nanoparticle (NP) functionality is known but still difficult to investigate, especially at a single particle level. Here, we apply DNA Point Accumulation for Imaging in Nanoscale Topography (DNA-PAINT), a super-resolution microscopy (SRM) technique, to study the surface functionality in poly(lactide-co-glycolide)-poly(ethylene glycol) (PLGA-PEG) NPs with different PEG structures. We demonstrated how the length of the PEG spacer can influence the accessibility of surface chemical functionality, highlighting the importance of SRM techniques to support the rational design of functionalized NPs.

Two-step fabricating micelle-like nanoparticles of cisplatin with the 'real' long circulation and high bioavailability for cancer therapy

Cisplatin is a widely used anticancer drug for various solid tumors. However, the serious adverse effects caused by systemic distribution limit its wide use. In this study, we intend to use biocompatible materials polyethyleneimine (PEI) and poly(L-glutamic acid)-g-methoxy poly(ethylene glycol) (PLG-g-PEG) to construct nanoparticles to enhance the efficacy of cisplatin and reduce its side effects. The micelle-like nanoparticles were fabricated by a simple two-step method, with a core consisting of PEI and cisplatin and a PLG-g-mPEG coating layer. The obtained nanoparticles have a small particle size (41.79 nm) and high drug loading (16.43%). The coated nanoparticles (NP-II) strengthened the structure of PEI and cisplatin complex (NP-I) and slowed the drug release for less than 20% at pH 7.4 PBS in 24 h. Therefore, it could effectively inhibit the binding of free drug and plasma proteins to achieve the long circulation, and the bioavailability could be increased to about 600% and 285% of cisplatin solution and NP-I respectively. Besides, the cellular uptake of NP-II was enhanced in the acidic tumor microenvironment due to the detachment of coating layer and the increase of positive zeta potential of nanoparticles, which was benefit to reduce the side effect of cisplatin to normal cells. In vivo pharmacodynamic experiments also showed that NP-II improved the efficacy and reduced side effects compared to the cisplatin solution. In conclusion, the two-step fabricating micelle-like nanoparticles with the improved therapeutic efficiency and reduced side effects show great potential for cancer chemotherapy.

Effects of polyethylene glycol on the surface of nanoparticles for targeted drug delivery

The rapid development of drug nanocarriers has benefited from the surface hydrophilic polymers of particles, which has improved the pharmacokinetics of the drugs. Polyethylene glycol (PEG) is a kind of polymeric material with unique hydrophilicity and electrical neutrality. PEG coating is a crucial factor to improve the biophysical and chemical properties of nanoparticles and is widely studied. Protein adherence and macrophage removal are effectively relieved due to the existence of PEG on the particles. This review discusses the PEGylation methods of nanoparticles and related techniques that have been used to detect the PEG coverage density and thickness on the surface of the nanoparticles in recent years. The molecular weight (MW) and coverage density of the PEG coating on the surface of nanoparticles are then described to explain the effects on the biophysical and chemical properties of nanoparticles.

Synthesis of Curcumin Loaded Smart pH-Responsive Stealth Liposome as a Novel Nanocarrier for Cancer Treatment

The innovation of drug delivery vehicles with controlled properties for cancer therapy is the aim of most pharmaceutical research. This study aims to fabricate a new type of smart biocompatible stealth-nanoliposome to deliver curcumin for cancer treatment. Herein, four different types of liposomes (with/without pH-responsive polymeric coating) were synthesized via the Mozafari method and then characterized with several tests, including dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), Zeta potential, and field emission scanning electron microscopes (FE-S EM). The loading and release profile of curcumin were evaluated in two pH of 7.4 and 6.6. Finally, the MTT assay was used to assess the cytotoxicity of the samples. FE-SEM results revealed a mean size of about 40 and 50 nm for smart stealth-liposome and liposome, respectively. The results of drug entrapment revealed that non-coated liposome had about 74% entrapment efficiency, while it was about 84% for PEGylated liposomes. Furthermore, the drug released pattern of the nanocarriers showed more controllable release in stealth-liposome in comparison to non-coated one. The results of the cytotoxicity test demonstrated the toxicity of drug-loaded carriers on cancer cells. Based on the results of this study, the as-prepared smart stealth pH-responsive nanoliposome could be considered as a potential candidate for cancer therapy.

Build-Up of a 3D Organogel Network within the Bilayer Shell of Nanoliposomes. A Novel Delivery System for Vitamin D3: Preparation, Characterization, and Physicochemical Stability

The inherent thermodynamic instability of liposomes during production and storage has limited their widespread applications. Therefore, a novel structure of food-grade nanoliposomes stabilized by a 3D organogel network within the bilayer shell was developed through the extrusion process and successfully applied to encapsulate vitamin D₃. A huge flocculation and a significant reduction of zeta potential (-17 mV) were observed in control nanoliposomes (without the organogel shell) after 2 months of storage at 4 °C, while the sample with a gelled bilayer showed excellent stability with a particle diameter of 105 nm and a high negative zeta potential (-63.4 mV), even after 3 months. The development of spherical vesicles was confirmed by TEM. Interestingly, the gelled bilayer shell led to improved stability against osmotically active divalent salt ions. Electron paramagnetic resonance confirmed the higher rigidity of the shell bilayer upon gelation. The novel liposome offered a dramatic increase in encapsulation efficiency and loading of vitamin D₃ compared to those of control.

The Effect of Ligand Mobility on the Cellular Interaction of Multivalent Nanoparticles

Multivalent nanoparticle binding to cells can be of picomolar avidity making such interactions almost as intense as those seen with antibodies. However, reducing nanoparticle design exclusively to avidity optimization by the choice of ligand and its surface density does not sufficiently account for controlling and understanding cell-particle interactions. Cell uptake, for example, is of paramount significance for a plethora of biomedical applications and does not exclusively depend on the intensity of multivalency. In this study, it is shown that the mobility of ligands tethered to particle surfaces has a substantial impact on particle fate upon binding. Nanoparticles carrying angiotensin-II tethered to highly mobile 5 kDa long poly(ethylene glycol) (PEG) chains separated by ligand-free 2 kDa short PEG chains show a superior accumulation in angiotensin-II receptor type 1 positive cells. In contrast, when ligand mobility is constrained by densely packing the nanoparticle surface with 5 kDa PEG chains only, cell uptake decreases by 50%. Remarkably, irrespective of ligand mobility and density both particle types have similar EC50 values in the 1-3 × 10^-9 m range. These findings demonstrate that ligand mobility on the nanoparticle corona is an indispensable attribute to be considered in particle design to achieve optimal cell uptake via multivalent interactions.

In Vitro and in Vivo Behavior of Liposomes Decorated with PEGs with Different Chemical Features

The colloidal stability, in vitro toxicity, cell association, and in vivo pharmacokinetic behavior of liposomes decorated with monomethoxy-poly(ethylene glycol)-lipids (mPEG-lipids) with different chemical features were comparatively investigated. Structural differences of the mPEG-lipids used in the study included: (a) surface-anchoring moiety [1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE), cholesterol (Chol), and cholane (Chln)]; (b) mPEG molecular weight (2 kDa mPEG₄₅ and 5 kDa mPEG₁₁₄); and (c) mPEG shape (linear and branched PEG). In vitro results demonstrated that branched (mPEG₁₁₄)₂-DSPE confers the highest stealth properties to liposomes (∼31-fold lower cell association than naked liposomes) with respect to all PEGylating agents tested. However, the pharmacokinetic studies showed that the use of cholesterol as anchoring group yields PEGylated liposomes with longer permeance in the circulation and higher systemic bioavailability among the tested formulations. Liposomes decorated with mPEG₁₁₄-Chol had 3.2- and ∼2.1-fold higher area under curve (AUC) than naked liposomes and branched (mPEG₁₁₄)₂-DSPE-coated liposomes, respectively, which reflects the high stability of this coating agent. By comparing the PEGylating agents with same size, namely, linear 5 kDa PEG derivatives, linear mPEG₁₁₄-DSPE yielded coated liposomes with the best in vitro stealth performance. Nevertheless, the in vivo AUC of liposomes decorated with linear mPEG₁₁₄-DSPE was lower than that obtained with liposomes decorated with linear mPEG₁₁₄-Chol. Computational molecular dynamics modeling provided additional insights that complement the experimental results.

Development and Characterization of PEGylated Chromatographic Monoliths as a Novel Platform for the Separation of PEGylated RNase a Isomers

PEGylated or polyethylene glycol-modified proteins have been used as therapeutic agents in different diseases. However, the major drawback in their procurement is the purification process to separate unreacted proteins and the PEGylated species. Several efforts have been done to separate PEGylation reactions by chromatography using different stationary phases and modified supports. In this context, this study presents the use of chromatographic monoliths modified with polyethylene glycol (PEG) to separate PEGylated Ribonuclease A (RNase A). To do this, Convective Interaction Media (CIM) Ethylenediamine (EDA) monolithic disks were PEGylated using three PEG molecular weights (1, 10, and 20 kDa). The PEGylated monoliths were used to separate PEGylated RNase A modified, as well, with three PEG molecular weights (5, 20, and 40 kDa) by hydrophobic interaction chromatography. Performance results showed that Bovine Serum Albumin (BSA) can bind to PEGylated monoliths and the amount of bound BSA increases when ammonium sulfate concentration and flow rate increase. Furthermore, when PEGylated RNase A was loaded into the PEGylated monoliths, PEG-PEG interactions predominated in the separation of the different PEGylated species (i.e., mono and di-PEGylated). It was also observed that the molecular weight of grafted PEG chains to the monolith impacts strongly in the operation resolution. Interestingly, it was possible to separate, for the first time, isomers of 40 kDa PEGylated RNase A by hydrophobic interaction chromatography. This technology, based on PEGylated monoliths, represents a new methodology to efficiently separate proteins and PEGylated proteins. Besides, it could be used to separate other PEGylated molecules of biopharmaceutical or biotechnological interest.

Magnetic liposome design for drug release systems responsive to super-low frequency alternating current magnetic field (AC MF)

HYPOTHESIS

Magnetic liposomes are shown to release the entrapped dye once modulated by low frequency AC MF. The mechanism and effectiveness of MF application should depend on lipid composition, magnetic nanoparticles (MNPs) properties, temperature and field parameters.

EXPERIMENTS

The study was performed using liposomes of various lipid composition and embedded hydrophobic MNPs. The liposomes structural changes were studied by the transmission electron microscopy (TEM) and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and the leakage was monitored by the fluorescent dye release.

FINDINGS

Magnetic liposomes exposure to the AC MF resulted in the clustering of the MNPs in the membranes and disruption of the lipid packaging. Addition of cholesterol diminished the dye release from the saturated lipid-based liposomes. Replacement of the saturated lipid for unsaturated one also decreased the dye release. The dye release depended on the strength, but not the frequency of the field. Thus, the oscillating motion of MNPs in AC MF ruptures the gel phase membranes of saturated lipids. As the temperature increases the disruption also increases. In the liquid crystalline membranes formed by unsaturated lipids the deformations and defects created by mechanical motion of the MNPs are more likely to heal and results in decreased release.

Ligand Density and Linker Length are Critical Factors for Multivalent Nanoparticle-Receptor Interactions

Although there are a large number of studies available for the evaluation of the therapeutic efficacy of targeted polymeric nanoparticles, little is known about the critical attributes that can further influence their uptake into target cells. In this study, varying cRGD ligand densities (0-100% surface functionalization) were combined with different poly(ethylene glycol) (PEG) spacer lengths (2/3.5/5 kDa), and the specific receptor binding of targeted core-shell structured poly(lactic- co-glycolic acid)/poly(lactic acid)-PEG nanoparticles was evaluated using α_vβ₃ integrin-overexpressing U87MG glioblastoma cells. Nanoparticles with 100% surface functionalization and short PEG2k linkers displayed a high propensity to form colloidal clusters, allowing for the cooperative binding to integrin receptors on the cellular membrane. In contrast, the high flexibility of longer PEG chains enhanced the chance of ligand entanglement and shrouding, decreasing the number of ligand-receptor binding events. As a result, the combination of short PEG2k linkers and a high cRGD surface modification synergistically increased the uptake of nanoparticles into target cells. Even though to date, the nanoparticle size and its degree of functionalization are considered to be the major determinants for controlling the uptake efficiency of targeted colloids, these results strongly suggest that the role of the linker length should be carefully taken into consideration for the design of targeted drug delivery formulations to maximize the therapeutic efficacy and minimize adverse side effects.

pH-Promoted Release of a Novel Anti-Tumour Peptide by "Stealth" Liposomes: Effect of Nanocarriers on the Drug Activity in Cis-Platinum Resistant Cancer Cells

PURPOSE

To evaluate the potential effects of PEGylated pH-sensitive liposomes on the intracellular activity of a new peptide recently characterized as a novel inhibitor of the human thymidylate synthase (hTS) over-expressed in many drug-resistant human cancer cell lines.

METHODS

Peptide-loaded pH-sensitive PEGylated (PpHL) and non-PEGylated liposomes (nPpHL) were carefully characterized and delivered to cis-platinum resistant ovarian cancer C13* cells; the influence of the PpHL on the drug intracellular activity was investigated by the Western Blot analysis of proteins involved in the pathway affected by hTS inhibition.

RESULTS

Although PpHL and nPpHL showed different sizes, surface hydrophilicities and serum stabilities, both carriers entrapped the drug efficiently and stably demonstrating a pH dependent release; moreover, the different behavior against J774 macrophage cells confirmed the ability of PEGylation in protecting liposomes from the reticuloendothelial system. Comparable effects were instead observed against C13* cells and biochemical data by immunoblot analysis indicated that PEGylated pH-sensitive liposomes do not modify the proteomic profile of the cells, fully preserving the activity of the biomolecule.

CONCLUSION

PpHL can be considered as efficient delivery systems for the new promising anti-cancer peptide.

The effect of sterol derivatives on properties of soybean and egg yolk lecithin liposomes: Stability, structure and membrane characteristics

The effects of three kinds of sterols (cholesterol, β-sitosterol and ergosterol) on the stability, microstructure and membrane properties of soybean and egg yolk lecithin liposomes were investigated by light scattering, transmission electron microscope (TEM), atomic force microscope (AFM), fluorescence and Fourier transform infrared spectroscopy (FTIR). The vesicle size of cholesterol or β-sitosterol incorporated liposomes was higher than that of the control and ergosterol incorporated ones, while the zeta-potential was similar when the same lecithin was used. Due to the excellent emulsifying capacity, Tween-80 was introduced into the system and which could obviously maintain the liposomal vesicle size in fetal bovine serum. According to TEM and AFM, the phenomena of membrane fusion and deformation were observed respectively in ergosterol-incorporated liposomes. Results of fluorescence probe spectra revealed the most compact membrane structure was found in cholesterol-incorporated liposomes, which was in accordance with the strongest intermolecular interaction in bilayers obtained by FTIR results. Conversely, the membrane of ergosterol-incorporated liposomes was the most fragile and fluid, which was also identified with the lowest physical stability obtained by Turbiscan. These results systematically illustrated the relationship between the structure of sterols and the liposomal membrane stability, and provided some meaningful information on the choice of sterols and lecithin in preparation of liposomes for different purposes.

Corrosion behaviour of micro-arc oxidation coatings on Mg–2Sr prepared in poly(ethylene glycol)-incorporated electrolytes

The highest corrosion resistance and lowest biodegradation are observed on the ceramic coating prepared in electrolytes containing 8 g L⁻¹ PEG₁₀₀₀.

Membrane-Fusogen Distance Is Critical for Efficient Coiled-Coil-Peptide-Mediated Liposome Fusion

We have developed a model system for membrane fusion that utilizes lipidated derivatives of a heterodimeric coiled-coil pair dubbed E3 (EIAALEK)3 and K3 (KIAALKE)3. In this system, peptides are conjugated to a lipid anchor via a poly(ethylene glycol) (PEG) spacer, and this contribution studies the influence of the PEG spacer length, coupled with the type of lipid anchor, on liposome-liposome fusion. The effects of these modifications on peptide secondary structure, their interactions with liposomes, and their ability to mediate fusion were studied using a variety of different content mixing experiments and CD spectroscopy. Our results demonstrate the asymmetric role of the peptides in the fusion process because alterations to the PEG spacer length affect E3 and K3 differently. We conclude that negatively charged E3 acts as a "handle" for positively charged K3 and facilitates liposome docking, the first stage of the fusion process, through coiled-coil formation. The efficacy of this E3 handle is enhanced by longer spacer lengths. K3 directs the fusion process via peptide-membrane interactions, but the length of the PEG spacer plays two competing roles: a PEG4/PEG8 spacer length is optimal for membrane destabilization; however, a PEG12 spacer increases the fusion efficiency over time by improving the peptide accessibility for successive fusion events. Both the anchor type and spacer length affect the peptide structure; a cholesterol anchor appears to enhance K3-membrane interactions and thus mediates fusion more efficiently.

Determination of Nonspherical Morphology of Doxorubicin-Loaded Liposomes by Atomic Force Microscopy

The 3-D morphology of doxorubicin (DOX)-loaded liposomes with a size of circa 100 nm was characterized by atomic force microscopy in an aqueous environment. Prolate liposomes appear in accordance with linear expansion of DOX fiber bundles precipitated inside liposomes. Oblate and concave liposomes were simultaneously observed with increased DOX concentrations; however, their morphologies were not readily determined by 2-D cryo-TEM imaging. Precise data analysis of the 3-D parameters of each liposome allowed semiquantitative evaluation of the transformation of spherical liposomes into nonspherical-prolate, oblate, and concave liposomes. In addition, nonspherical liposomes became spherical on the replacement of the liposomal outer phase consisting of a sucrose solution, with water and subsequent water influx. All spherical liposomes transformed into oblate and concave liposomes with a return to hyperosmotic conditions, when transferred from water to sucrose solution. Furthermore, the concave liposomes did not appear under DOX incubation conditions (65°C), which could be due to the amorphous and supersaturated DOX inside the liposomes that restrained liposomal shrinkage. As atomic force microscopy has improved our ability to image 3-D morphologies of liposomes in various conditions, it is an alternative analytical tool to cryo-TEM and may have future applications in regulatory tests for quality control and assurance.

Lipid-based systems loaded with PbS nanocrystals: near infrared emitting trackable nanovectors

Hydrophobic PbS nanocrystals (NCs) emitting in the near infrared spectral region were encapsulated in the core of micelles and in the bilayer of liposomes, respectively, to form polyethylene glycol (PEG)-grafted phospholipids. The phospholipid-based functionalization process of PbS NCs required the replacement of the pristine capping ligand at the NC surface with thiol molecules. The procedures carried out for two systems, micelles and liposomes, using PEG-modified phospholipids were carefully monitored by optical, morphological and structural investigations. The hydrodynamic diameter and the colloidal stability of both micelles and liposomes loaded with PbS NCs were evaluated using Dynamic Light Scattering (DLS) and ζ-potential experiments, and both were satisfactorily stable in physiological media. The cytotoxicity of the resulting PbS NC-loaded nanovectors was assessed by the in vitro investigation on Saos-2 cells, indicating that the toxicity of the PbS NC loaded liposomes was lower than that of the micelles with the same NC cargo, which is reasonable due to the different overall composition of the two prepared nanocarriers. Finally, the cellular uptake in the Saos-2 cells of both the NC containing systems was evaluated by means of confocal microscopy studies by exploiting a visible fluorescent phospholipid and demonstrating the ability of both luminescent nanovectors to be internalized. The obtained results show the great potential of the prepared emitting nanoprobes for imaging applications in the second biological window.

Advances in Hybrid Polymer-Based Materials for Sustained Drug Release

The use of biomaterials composed of organic pristine components has been successfully described in several purposes, such as tissue engineering and drug delivery. Drug delivery systems (DDS) have shown several advantages over traditional drug therapy, such as greater therapeutic efficacy, prolonged delivery profile, and reduced drug toxicity, as evidenced by in vitro and in vivo studies as well as clinical trials. Despite that, there is no perfect delivery carrier, and issues such as undesirable viscosity and physicochemical stability or inability to efficiently encapsulate hydrophilic/hydrophobic molecules still persist, limiting DDS applications. To overcome that, biohybrid systems, originating from the synergistic assembly of polymers and other organic materials such as proteins and lipids, have recently been described, yielding molecularly planned biohybrid systems that are able to optimize structures to easily interact with the targets. This work revised the biohybrid DDS clarifying their advantages, limitations, and future perspectives in an attempt to contribute to further research of innovative and safe biohybrid polymer-based system as biomaterials for the sustained release of active molecules.