Nanohybrid MoS2-PANI-CdS photocatalyst for hydrogen evolution from water

Effect of gamma irradiation on properties of the synthesized PANI-Cu nanoparticles assimilated into PS polymer for electromagnetic interference shielding application

Conductive polymer nanocomposites for electromagnetic interference (EMI) shielding are important materials that can be combat the increasingly dangerous radiation pollution arising from electronic equipment and our surrounding environment. In this work, we have synthesized polyaniline-copper nanoparticles (PANI-Cu NPs) by the copper salt based oxidative polymerization method at room temperature and then added with different concentration (0, 1, 3 and 5 wt%) in polystyrene polymer forming PS/ PANI-Cu nanocomposites films by means of the traditional solution casting technique. The formed PANI-Cu NPs were investigated by UV/Vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM) and SEM/EDX elemental mapping techniques. On the other hand, the prepared PS/PANI-Cu nanocomposites films were evaluated by UV and SEM, the mechanical properties of the nanocomposites films were evaluated and showed an improvement by added PANI-Cu NPs up to 3 wt% and 50 kGy gamma exposure dose. The PS/PANI-Cu nanocomposites films were examined as electromagnetic interference shielding material. Electromagnetic shielding effectiveness of the produced nanocomposites were tested in the X-band of the radio frequency range namely from 8 to 12 GHz using the vector network analyzer (VNA) and a proper wave guide. All samples were studied before and after 50 kGy gamma-ray irradiation under the same condition of pressure and temperature. The results showed that the nanocomposites have improved shielding properties.

Boosting the performance of LaCoO3/MoS2 perovskite interface for sustainable decontaminants under visible light-driven photocatalysis

The novel composite LaCoO3/MoS2 hybrid nanostructure was synthesized via a combination of sol-gel, hydrothermal, and ultrasonication methods. Alizarin Red S (ARS) and Rhodamine B (RhB) were employed as a model pollutant, to assess the photodegradation efficiency of synthesized catalysts. The effect of MoS2 (2.5%, 5%, 7.5%, and 10%) on LaCoO3 (LCO) and its photocatalytic performance was studied. The properties of synthesized catalysts were assessed using various material characterization techniques. The photocatalytic dye degradation of ARS and RhB was investigated under visible light. Among the synthesized catalyst LM-5% composite (LaCoO3 with 5% MoS2) is determined to be the best photocatalyst as it degrades 96 % (ARS) and 90 % (RhB) in 40 min and 80 min, respectively. The photocatalyst is stable even after multiple runs and exhibits negligible loss in degradation efficiency during the cyclic test. Trapping experiments reveal the significance of superoxide anion and hydroxyl radicals against the photodegradation of ARS and RhB. The kinetics of photodegradation of ARS and RhB by LM-5% is found to be 5.70 × 10-2 and 2.25 × 10-2 min-1, respectively. Herein, we demonstrated a catalyst possessing excellent photodegradation activity which may ignite the possibilities of using efficient photocatalysts for environmental remediation.

MoS2-Based Nanocomposites for Photocatalytic Hydrogen Evolution and Carbon Dioxide Reduction

Photocatalysis is a facile and sustainable approach for energy conversion and environmental remediation by generating solar fuels from water splitting. Due to their two-dimensional (2D) layered structure and excellent physicochemical properties, molybdenum disulfide (MoS₂) has been effectively utilized in photocatalytic H₂ evolution reaction (HER) and CO₂ reduction. The photocatalytic efficiency of MoS₂ greatly depends on the active edge sites present in their layered structure. Modifications like reducing the layer numbers, creating defective structures, and adopting different morphologies produce more unsaturated S atoms as active edge sites. Hence, MoS₂ acts as a cocatalyst in nanocomposites/heterojunctions to facilitate the photogenerated electron transfer. This review highlights the role of MoS₂ as a cocatalyst for nanocomposites in H₂ evolution reaction and CO₂ reduction. The H₂ evolution activity has been described comprehensively as binary (with metal oxide, carbonaceous materials, metal sulfides, and metal-organic frameworks) and ternary composites of MoS₂. Photocatalytic CO₂ reduction is a more complex and challenging process that demands an efficient light-responsive semiconductor catalyst to tackle the thermodynamic and kinetic factors. Photocatalytic reduction of CO₂ using MoS₂ is an emerging topic and would be a cost-effective substitute for noble catalysts. Herein, we also exclusively envisioned the possibility of layered MoS₂ and its composites in this area. This review is expected to furnish an understanding of the diverse roles of MoS₂ in solar fuel generation, thus endorsing an interest in utilizing this unique layered structure to create nanostructures for future energy applications.

Hydrated electrons mediated in-situ construction of cubic phase CdS/Cd thin layer on a millimeter-scale support for photocatalytic hydrogen evolution

In this study, non-noble metal Cd decorated cubic phase CdS (CdS/Cd) thin layer on a millimeter-scale chitosan-Mg(OH)₂ xerogel beads (CMB) were elaborately designed and successfully synthesized via facile hydrated electrons (e_aq^•-) assistant strategy. The in-situ formation of metallic Cd was driven by e_aq^•- generated from UV/Na₂SO₃ process. Owing to metallic Cd, CMB@CdS/Cd exhibited better visible-light absorption ability and more efficient separation capability for photo-induced carriers, its hydrogen production efficiency was about threefold improved compared to CMB@CdS. Both characterization methods and density functional theory calculations determined a built-in electric field from metallic Cd to CdS and Ohmic-contact between Cd and CdS, which largely promoted the carriers transfer efficiency. Moreover, the introduction of metallic Cd on the CdS could reduce the ΔG_H*, thus greatly boosting the photocatalytic hydrogen production efficiency. This work provides a simple and green approach to construct metallic Cd coupled semiconductor to achieve efficient photocatalytic applications.

Recent Progress, Challenges, and Prospects in Two-Dimensional Photo-Catalyst Materials and Environmental Remediation

The successful photo-catalyst library gives significant information on feature that affects photo-catalytic performance and proposes new materials. Competency is considerably significant to form multi-functional photo-catalysts with flexible characteristics. Since recently, two-dimensional materials (2DMs) gained much attention from researchers, due to their unique thickness-dependent uses, mainly for photo-catalytic, outstanding chemical and physical properties. Photo-catalytic water splitting and hydrogen (H2) evolution by plentiful compounds as electron (e-) donors is estimated to participate in constructing clean method for solar H2-formation. Heterogeneous photo-catalysis received much research attention caused by their applications to tackle numerous energy and environmental issues. This broad review explains progress regarding 2DMs, significance in structure, and catalytic results. We will discuss in detail current progresses of approaches for adjusting 2DMs-based photo-catalysts to assess their photo-activity including doping, hetero-structure scheme, and functional formation assembly. Suggested plans, e.g., doping and sensitization of semiconducting 2DMs, increasing electrical conductance, improving catalytic active sites, strengthening interface coupling in semiconductors (SCs) 2DMs, forming nano-structures, building multi-junction nano-composites, increasing photo-stability of SCs, and using combined results of adapted approaches, are summed up. Hence, to further improve 2DMs photo-catalyst properties, hetero-structure design-based 2DMs' photo-catalyst basic mechanism is also reviewed.

Developing the Ternary ZnO Doped MoS2 Nanostructures Grafted on CNT and Reduced Graphene Oxide (RGO) for Photocatalytic Degradation of Aniline

Transition metal sulfide semiconductors have achieved significant attention in the field of photocatalysis and degradation of pollutants. MoS2 with a two dimensional (2D) layered structure, a narrow bandgap and the ability of getting excited while being exposed to visible light, has demonstrated great potential in visible-light-driven photocatalysts. However, it possesses fast-paced recombination of charges. In this study, the coupled MoS2 nanosheets were synthesized with ZnO nanorods to develop the heterojunctions photocatalyst in order to obtain superior photoactivity. The charge transfer in this composite is not adequate to achieve desirable activity. Therefore, heterojunction was modified by reduced graphene oxide (RGO) nanosheets and carbon nanotubes (CNTs) to develop the RGO/ZnO/MoS2 and CNTs/ZnO/MoS2 ternary nanocomposites. The structure, morphology, composition, optical and photocatalytic properties of the as-fabricated samples were characterized through X-ray diffraction (XRD), Fourier Transform Infrared (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM), Energy-Dispersive X-ray (EDX), elemental mapping, Photoluminescence (PL), Ultraviolet-Visible spectroscopy (UV-VIS), and Brunauer-Emmett-Teller (BET) techniques. The photo-catalytic performance of all samples was evaluated through photodegradation of aniline in aqueous solution. The combination of RGO or CNTs into the ZnO/MoS2 greatly promoted the catalytic activity. However, the resulting RGO/ZnO/MoS2 ternary nanocomposites showed appreciably increased catalytic performance, faster than that of CNTs/ZnO/MoS2. Charge carrier transfer studies, the BET surface area analysis, and the optical studies confirmed this superiority. The role of operational variables namely, solution pH, catalyst dosage amount, and initial concentration of aniline was then investigated for obtaining maximum degradation. Complete degradation was observed, in the case of pH = 4, catalyst dosage of 0.7 g/L and aniline concentration of 80 ppm, and light intensity of 100 W. According to the results of trapping experiments, hydroxyl radical was found to be the main active species in the photocatalytic reaction. Meanwhile, a plausible mechanism was proposed for describing the degradation of aniline upon ternary composite. Moreover, the catalyst showed excellent reusability and stability after five consecutive cycles due to the synergistic effect between its components. Total-Organic-Carbon concentration (TOC) results suggested that complete mineralization of aniline occurred after 210 min of irradiation. Finally, a real petrochemical wastewater sample was evaluated for testing the catalytic ability of the as-fabricated composites in real case studies and it was observed that the process successfully quenched 100% and 93% of Chemical Oxygen Demand (COD) and TOC in the wastewater, respectively.

Efficient charge separation between ZnIn2S4 nanoparticles and polyaniline nanorods for nitrogen photofixation

Novel core–shell polyaniline@ZnIn₂S₄ core–shell heterostructure photocatalysts have been prepared using a simple synthesis process, and they exhibit superior performances of photocatalytic N₂ reduction to NH₃ in an atmospheric environment.

Recent Progress on Metal Sulfide Composite Nanomaterials for Photocatalytic Hydrogen Production

Metal sulfide-based photocatalysts have gained much attention due to their outstanding photocatalytic properties. This review paper discusses recent developments on metal sulfide-based nanomaterials for H2 production, acting as either photocatalysts or cocatalysts, especially in the last decade. Recent progress on key experimental parameters, in-situ characterization methods, and the performance of the metal sulfide photocatalysts are systematically discussed, including the forms of heterogeneous composite photocatalysts, immobilized photocatalysts, and magnetically separable photocatalysts. Some methods have been studied to solve the problem of rapid recombination of photoinduced carriers. The electronic density of photocatalysts can be investigated by in-situ C K-edge near edge X-ray absorption fine structure (NEXAFS) spectra to study the mechanism of the photocatalytic process. The effects of crystal properties, nanostructure, cocatalyst, sacrificial agent, electrically conductive materials, doping, calcination, crystal size, and pH on the performance of composite photocatalysts are presented. Moreover, the facet effect and light trapping (or light harvesting) effect, which can improve the photocatalytic activity, are also discussed.

Recent Developments about Conductive Polymer Based Composite Photocatalysts

Conductive polymers have been widely investigated in various applications. Several conductive polymers, such as polyaniline (PANI), polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT)), and polythiophene (PTh) have been loaded with various semiconductor nanomaterials to prepare the composite photocatalysts. However, a critical review of conductive polymer-based composite photocatalysts has not been available yet. Therefore, in this review, we summarized the applications of conductive polymers in the preparation of composite photocatalysts for photocatalytic degradation of hazardous chemicals, antibacterial, and photocatalytic hydrogen production. Various materials were systematically surveyed to illustrate their preparation methods, morphologies, and photocatalytic performances. The synergic effect between conductive polymers and semiconductor nanomaterials were observed for a lot of composite photocatalysts. The band structures of the composite photocatalysts can be analyzed to explain the mechanism of their enhanced photocatalytic activity. The incorporation of conductive polymers can result in significantly improved visible-light driven photocatalytic activity by enhancing the separation of photoexcited charge carriers, extending the light absorption range, increasing the adsorption of reactants, inhibiting photo-corrosion, and reducing the formation of large aggregates. This review provides a systematic concept about how conductive polymers can improve the performance of composite photocatalysts.

MoS2 quantum dot-modified Ag/polyaniline composites with enhanced photogenerated carrier separation for highly efficient visible light photocatalytic H2 evolution performance

Uniform heterostructured MoS₂ QDs–Ag/PANI composites are fabricated, which exhibit significantly enhanced photocatalytic activity for H₂ production under visible light irradiation.

Ag/polyaniline heterostructured nanosheets loaded with g-C3N4 nanoparticles for highly efficient photocatalytic hydrogen generation under visible light

Uniform heterostructured 2D g-C₃N₄–Ag/polyaniline nanosheets were fabricated, which exhibit significantly enhanced photocatalytic activity for H₂ production under visible light irradiation.

Rational design of semiconductor-based photocatalysts for advanced photocatalytic hydrogen production: the case of cadmium chalcogenides

This review summarizes the recent advances in developing CdX (X = S, Se, Te)-based photocatalyst systems for photocatalytic hydrogen production from water.

Mineralization of anionic dyes over visible light responsive Cd(x)Zn(y)S–Nb2O5 heterostructured photocatalysts

A novel, CdxZnyS–Nb₂O₅ heterostructured photocatalyst exhibits enhanced photocatalytic activity for the degradation and mineralization of anionic dyes such as AV 7, MO and IC.