Role of chemical reaction and drag force during drop impact gelation process

Chitosan Alginate Nanoparticles of Protein Hydrolysate from Acheta domesticus with Enhanced Stability for Skin Delivery

This study aimed to develop chitosan alginate nanoparticles (CANPs) for enhanced stability for dermal delivery of protein hydrolysate from Acheta domesticus (PH). CANPs, developed using ionotropic pre-gelation followed by the polyelectrolyte complex technique, were characterized for particle size, polydispersity index (PDI), and zeta potential. After the incorporation of PH into CANPs, a comprehensive assessment included encapsulation efficiency, loading capacity, morphology, chemical analyses, physical and chemical stability, irritation potential, release profile, skin permeation, and skin retention. The most optimal CANPs, comprising 0.6 mg/mL sodium alginate, 1.8 mg/mL calcium chloride, and 0.1 mg/mL chitosan, exhibited the smallest particle size (309 ± 0 nm), the narrowest PDI (0.39 ± 0.01), and pronounced negative zeta potential (-26.0 ± 0.9 mV), along with an encapsulation efficiency of 56 ± 2%, loading capacity of 2.4 ± 0.1%, release of 40 ± 2% after 48 h, and the highest skin retention of 12 ± 1%. The CANPs induced no irritation and effectively enhanced the stability of PH from 44 ± 5% of PH remaining in a solution to 74 ± 4% after three-month storage. Therefore, the findings revealed the considerable potential of CANPs in improving PH stability and skin delivery, with promising applications in cosmetics and related fields.

Fabrication and Morphological Control of Nonspherical Alginate Hydrogel Particles

We report a simple platform for the fabrication of nonspherical alginate hydrogel particles using a dripping method. Hydrogel particles with novel morphologies, such as vortex ring, teardrop, disk, sphere, and mushroom, are fabricated by controlling various parameters. We monitored the deformation process of the hydrogel particles after they penetrated the crosslinking solution using a high-speed camera. Then, we proposed a mechanism showing a unique morphological transformation from a spherical to a disk shape. We demonstrated how controlling the collecting height that causes the drop impact force against the crosslinking solution surface was critical to producing hydrogel particles with these intriguing shapes. In particular, disk-shaped alginate particles show their ability as potential platforms for culturing mouse adrenocortical tumor cells (Y1) and a hippocampal neuronal cell (HT-22). To modify alginate particles, cell-adhesive gelatin is incorporated into the alginate matrix and then alginate particles are coated with poly(allylamine hydrochloride). Two modified alginate particles show good adhesion and proliferation rates on their surfaces. In particular, the hybrid hydrogel particles provide great potential to be developed into promising materials for cell culture, drug delivery, and tissue engineering.

Experimental Advances in the Real-Time Recording of Cross-Linking Alginate In Situ Gelation: A Review

Alginate-based hydrogels are promising smart materials widely employed in the food, bioengineering, and energy sectors. The development and optimization of their production require a thorough knowledge of gelation. In recent years, advanced experimental procedures have been developed for real-time cross-linking alginate reaction monitoring. Novel methods, such as customized rheometric setups, enable the recording of mechanical properties and morphological changes during hydrogel formation. These innovative techniques provide important insights into the gelation stages, the reaction rate, the diffusion of cross-linker to polymer chains, and the homogeneity of the gelling structures. Based on real-time experimental data, kinetic models are developed to enhance comprehension of the reaction mechanism and, eventually, to predict the gelation progress. The aim is to enable better control of the characterization of both the complex gelation and the propagated structures. This review aspires to present a comprehensive overview and evaluation of the breakthrough innovations of the real-time in situ recording of cross-linking alginate hydrogels and bead formation. A detailed analysis of the pioneering experimental developments provides a deep comprehension of the alginate gelation, including the parameters controlling the reaction.

Sub-100-micron calcium-alginate microspheres: Preparation by nitrogen flow focusing, dependence of spherical shape on gas streams and a drug carrier using acetaminophen as a model drug

We developed a miniature gas-liquid coaxial flow device using glass capillaries, aiming to produce sub-100-μm Ca-alginate microspheres. Depending on collecting distance and the flow rates of nitrogen gas and alginate solution, however, Ca-alginate microparticles of different shapes were obtained. Spherical, monodisperse microparticles (microspheres) could only be obtained at certain gas flow rates and within a corresponding range of collecting distance. The result suggests that, for particles of this size, the gas flow rate and collecting distance are crucial for the formation of the spherical shape. We evaluated, as an example of its applications, the microsphere as a drug carrier using acetaminophen as a model drug. Large (~150 μm) and small (~70 μm) drug-loaded microspheres were prepared using two respective devices. Specifically, the drug-loaded microspheres were complexed with chitosan of different molecular weights. The dependence of in vitro drug release on the microsphere size and the chitosan molecular weight was examined. CHEMICAL COMPOUNDS STUDIED IN THIS ARTICLE: Alginic acid sodium salt (PubChem CID: 5102882); Chitosan (PubChem CID: 71853); Calcium chloride (PubChem CID: 5284359); Sodium chloride (PubChem CID: 5234); Acetaminophen (PubChem CID: 1983); Polydimethylsiloxane (PubChem CID: 24771); n-Octadecyltrimethoxysilane (PubChem CID: 76486).

A comprehensive parametric study for understanding the combined millifluidic and dripping encapsulation process and characterisation of oil-loaded capsules

AIM

This study aimed to utilise and optimise the millifluidic and dripping encapsulation technique to develop and characterise the oil-core capsules.

METHODS

Sodium alginate with Tween-20 (continuous phase) and sunflower oil (dispersed phase) were used in millifluidic system. After determining the surface and interfacial tensions and flow behaviour parameters, flow rates of phases and concentrations of alginate and Tween were optimised by the Taguchi method. The flow regime of droplets was also evaluated. Optimised millicapsules were characterised concerning morphology, dimension, encapsulation efficiency, SEM, FTIR and, DSC results.

RESULTS

Dripping flow regime during droplet formation was observed. Reducing the interfacial tension between the continuous and dispersed phases resulted in about a 10.18% reduction in diameter. Optimised millicapsules depicted spherical shape (0.03 ± 0.01) with 3.95 ± 0.05 mm size and 97.5 ± 0.2% encapsulation efficiency. The FTIR and DSC results confirmed the entrapment of oil.

CONCLUSION

Millifluidic and dripping method effectively encapsulated sunflower oil in core-shell capsules.

Custom-made rheological setup for in situ real-time fast alginate-Ca2+ gelation

There is a growing interest in the in situ gelation of the alginate-Ca²⁺ system due to its remarkable applications. In this work, we record and evaluate the fast gelation kinetics of alginate-Ca²⁺ using a custom-made rheometric setup. This enables us to inject CaCl₂ into the alginate while we perform the rheological measurements. We successfully measure the in situ gelation reaction from the early stages. As the alginate concentration is increased up to 3 wt.%, we observe a systematic increase of the elastic modulus, G'. Similarly, higher concentrations and injected volumes of CaCl₂ increase the magnitude and initial growth rate of G'. At longer times, the growth rate of G' is lower. It decreases further very slowly, indicating that the chemical reaction requires quite a considerable amount of time to be completed. Finally, from the rheometric data, we estimate the average rates of the elastic modulus during the initial and quasi-steady-state stages.