A novel magnetic biochar/MgFe-layered double hydroxides composite removing Pb2+ from aqueous solution: Isotherms, kinetics and thermodynamics

Valorization of castor seed shell waste as lead adsorbent by treatment with hot phosphoric acid: Optimization and evaluation of adsorption properties

Lead is used in many industries such as refining, mining, battery manufacturing, smelting. Releases of lead from these industries is one of the major public health concerns due to widespread persistence in the environment and its resulting poisoning character. In this work, the castor seed shell (CSS) waste was exploited for preparing a beneficial bio-adsorbent for removal of Pb(II) ions from water. The raw CSS was modified with H3PO4 at different acid concentrations, impregnation ratios, activation times, and temperatures. An optimum adsorption capacity was observed for CSS modified with 2 M acid, 5 mL g-1 solid to liquid ratio, treated at 95 °C for 160 min. Exploiting acid modification, the SEM, XRD, and FTIR analyses show some alterations in functional groups and the surface morphology of the biomass. The impacts of physiochemical variables (initial lead ions concentration, pH, adsorbent dose and adsorption time) on the lead removal percentage were investigated, using response surface methodology (RSM). Maximum removal of 72.26% for raw CSS and 97.62% for modified CSS were obtained at an initial lead concentration (50 mg L-1), pH (5.7), adsorption time (123 min) and adsorbent dosage (1.1 g/100 mL). Isothermal and kinetics models were fitted to adsorption equilibrium data and kinetics data for the modified CSS and the adsorption system was evaluated thermodynamically and from the energy point of view. Isothermal scrutinization indicated the mono-layer nature of adsorption, and the kinetics experimental outcomes best fitted with the pseudo-second-order, implying that the interaction of lead ions and hot acid-treated CSS was the rate-controlling phenomenon of process. Overall, results illustrated that the hot acid-treated biomass-based adsorbent can be considered as an alternative bio-adsorbent for removing lead from water media.

Functionality of wheat straw-derived biochar enhanced its efficiency for actively capping Cd and Pb in contaminated water and soil matrices: Insights through batch adsorption and flow-through experiments

The impact of functionality of biochar on pressing environmental issue of cadmium (Cd) and lead (Pb) co-contamination in simultaneous soil and water systems has not sufficiently reported. This study investigated the impact of Fe- and Mg-functionalized wheat straw biochar (Fe-WSBC and Mg-WSBC) on Cd and Pb adsorption/immobilization through batch sorption and column leaching trials. Importantly, Fe-WSBC was more effective in adsorbing Cd and Pb (82.84 and 111.24 mg g-1), regeneration ability (removal efficiency 94.32 and 92.365), and competitive ability under competing cations (83.15 and 84.36%) compared to other materials (WSBC and Mg-WSBC). The practical feasibility of Fe-WSBC for spiked river water verified the 92.57% removal of Cd and 85.73% for Pb in 50 mg L-1 and 100 mg L-1 contamination, respectively. Besides, the leaching of Cd and Pb with Fe-WSBC under flow-through conditions was lowered to (0.326 and 17.62 mg L-1), respectively as compared to control (CK) (0.836 and 40.40 mg L-1). In short, this study presents the applicable approach for simultaneous remediation of contaminated water and soil matrices, offering insights into environmentally friendly green remediation strategies for heavy metals co-contaminated matrices.

Adsorptive removal of phosphate from water with biochar from acacia tree modified with iron and magnesium oxides

A novel biochar (BC) from Acacia tortilis trees pruning waste was synthesized and tested for the removal of phosphate from aqueous solutions. The BC was prepared by calcination at 600 °C and doped with Fe3O4 and MgO by hydrothermal process. The presence of iron and magnesium ions in the modified BC was confirmed by EDS analysis and X-ray diffraction (XRD) methods. Both unmodified and doped BCs were tested for phosphate removal from synthetic 1-500 ppm aqueous solutions. While the unmodified BC did not show any significant removal of phosphate from aqueous solutions, the modified BC almost completely removed phosphate from water. The enhancement in removal efficiency is due to an increase in the overall surface charge and surface area of BC as a result of doping with Fe3O4 and MgO salts. The average porosity and BET surface area corresponding to the plain BC increased by more than 20% from 322 to 394 m2/g after modification by impregnation with iron oxide and magnesium oxide. The modificaiton of BC with Fe3O4 and MgO nanoparticles was observed to increase the point of zero electric charge (PZC) from pH 3.4 (corresponding to plain BC) to pH 5.3 (corresponding to modified BC). The adsorption process was very fast and a phosphate removal value of 82.5% was reached only after 30 min of adsorption, while the removal efficiency after 4 h of adsorption was 97.5%. The rapid removal efficiency in short contact time is attributed to the high surface area of BC and strong bonding between the modified BC surface and PO43- ions. The highest adsorption capacity was observed to correspond to 98.5 mg/g which was achieved at PO43- concentration of 500 ppm and pH 8.5. Moreover, after fitting the adsorption data onto four of the most widely used adsorption isotherm models, the adsorption of PO43- onto BC can be better described by the Langmuir isotherm model.

Recent advances in environmental and agricultural applications of hydrochars: A review

Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.

Na/N Co-doped Seaweed Biochar Composite for Efficient Removal of Aqueous Pb(II) and Cu(II)

Pollution from harmful heavy metal ions such as Pb(II) and Cu(II) is causing serious environmental and health problems. In this study, Sodium and nitrogen co-doped porous carbon material (Na/NABc) was successfully prepared from seaweed, sodium hydroxide, and dicyandiamide. The experimental results showed that Na/NABc is an excellent adsorbent for the effective removal of Pb(II) and Cu(II) from water bodies. Specifically, 99.8% of Pb(II) and 64.6% Cu(II) (100 mg/L) were removed within 12 h using 10 mg Na/NABc(10%) at 25 °C. The adsorption of Pb(II) and Cu(II) in aqueous solution by Na/NABc(10%) was efficient and rapid in the first stage. The theoretical maximum removal capacities of Na/NABc for Pb(II) and Cu(II) were 959.6 and 299.1 mg/g, respectively. Pb(II) and Cu(II) ions were adsorbed quickly in the first 60 min, and the kinetics data were generally consistent with a pseudo-second-order model. Na/NABc(10%) had a large distribution coefficient for Pb(II) (8.38 L/mg) and Cu(II) (1.17 L/mg). The possible mechanisms were precipitation, Ion exchange, and surface complexation. The removal rate can reach about 70% after five cycles, and the release of sodium meets the standard. The results of this study demonstrate the potential applicability of Na/NABc(10%) for adsorption of heavy metals from aqueous solution.

Recent trends and economic significance of modified/functionalized biochars for remediation of environmental pollutants

The pollution of soil and aquatic systems by inorganic and organic chemicals has become a global concern. Economical, eco-friendly, and sustainable solutions are direly required to alleviate the deleterious effects of these chemicals to ensure human well-being and environmental sustainability. In recent decades, biochar has emerged as an efficient material encompassing huge potential to decontaminate a wide range of pollutants from soil and aquatic systems. However, the application of raw biochars for pollutant remediation is confronting a major challenge of not getting the desired decontamination results due to its specific properties. Thus, multiple functionalizing/modification techniques have been introduced to alter the physicochemical and molecular attributes of biochars to increase their efficacy in environmental remediation. This review provides a comprehensive overview of the latest advancements in developing multiple functionalized/modified biochars via biological and other physiochemical techniques. Related mechanisms and further applications of multiple modified biochar in soil and water systems remediation have been discussed and summarized. Furthermore, existing research gaps and challenges are discussed, as well as further study needs are suggested. This work epitomizes the scientific prospects for a complete understanding of employing modified biochar as an efficient candidate for the decontamination of polluted soil and water systems for regenerative development.

Co-adsorption mechanisms of As(V) and Cd(II) by three-dimensional flower-like Mg/Al/Fe-CLDH synthesized by "memory effect"

Due to the different physical and chemical properties such as surface charge and ion morphology between As(V) and Cd(II), it is challenging to remove As(V) and Cd(II), especially at low concentrations. This study constructed a novel three-dimension nanocomposite adsorbent Mg/Al/Fe-CLDH (CFMA) by "hydrothermal + calcination method". And different initial concentration ratios (Cd: As=1: 2, 1: 1, 2: 1) were used to investigate the removal performance of CFMA for Cd(II) and As(V). When the concentration ratio Cd: As=1: 2, the residual concentrations of As(V) and Cd(II) were 8.7 μg/L and 4.2 μg/L, respectively, which met the drinking water standard; In the co-adsorption system, As(V) and Cd(II) influence each other's adsorption behavior due to the anionic bridge and shielding effect of As(V) on Cd(II), As(V) gradually changed from monolayer adsorption to multi-layer adsorption dominant, while Cd(II) gradually changed from multi-layer adsorption to monolayer adsorption dominant. In this paper, the structure-activity relationship between material structure and synchronous removal of arsenic and cadmium was clarified, and the mechanism of synchronous removal was revealed, which provided technical guidance for synchronous removal of As(V) and Cd(II) from non-ferrous metal smelting wastewater.

Biochar/layered double hydroxides composites as catalysts for treatment of organic wastewater by advanced oxidation processes: A review

Heterogeneous advanced oxidation process has been widely studied as an effective method for removing organic pollutants in wastewater, but the development of efficient catalysts is still challenging. This review summaries the present status of researches on biochar/layered double hydroxides composites (BLDHCs) as catalysts for treatment of organic wastewater. The synthesis methods of layered double hydroxides, the characterizations of BLDHCs, the impacts of process factors influencing catalytic performance, and research advances in various advanced oxidation processes are discussed in this work. The integration of layered double hydroxides and biochar provides synthetic effects for improving pollutant removal. The enhanced pollutant degradation in heterogeneous Fenton, sulfate radical-based, sono-assisted, and photo-assisted processes using BLDHCs have been verified. Pollutant degradation in heterogeneous advanced oxidation processes using BLDHCs is influenced by process factors such as catalyst dosage, oxidant addition, solution pH, reaction time, temperature, and co-existing substances. BLDHCs are promising catalysts due to the unique features including easy preparation, distinct structure, adjustable metal ions, and high stability. Currently, catalytic degradation of organic pollutants using BLDHCs is still in its infancy. More researches should be conducted on the controllable synthesis of BLDHCs, the in-depth understanding of catalytic mechanism, the improvement of catalytic performance, and large-scale application of treating real wastewater.

Phosphate adsorption on LDHs-biochar composite: Double-layer model for quantifying the contribution of ion exchange and ligand exchange

The adsorption performance of layered double hydroxides (LDHs) is limited owing to self-aggregation. To avoid this and effectively control the eutrophication of water bodies, biochar (BC) was synthesized, herein, by pyrolyzing waste sheep manure at 500°C, and Ca-Al-LDHs were loaded on the surface via a coprecipitation method to obtain Ca-Al-LDHs-BC(CA) composites with varying LDH contents. The fitted maximum adsorption capacities of the CA-5%, CA-10%, CA-15%, and CA-20% samples (corresponding to samples with 5%, 10%, 15%, and 20% LDHs, respectively) were 10.21, 16.14, 22.40, and 28.47 mg g-1, which were (when converted into metal proportions) 1.48, 1.23, 1.15, and 1.13 times of that of single hydrotalcite, respectively. The double-layer model was fitted using the Levenberg-Marquardt iterative algorithm, which when combined with the characterization results, confirmed that the adsorption of phosphate ions by CA-BC occurred via the double-layer adsorption mechanism. Two types of direct adsorption were observed: ion exchange, which resulted in first-layer adsorption, and ligand exchange, which resulted in second-layer adsorption, with first-layer adsorption accounting for a higher proportion. This double-layer adsorption mechanism showed that LDHs-BC could achieve higher ligand exchange performance compared to that achieved using only LDHs.

The Removal of Pollutants from Wastewater Using Magnetic Biochar: A Scientometric and Visualization Analysis

In recent years, the use of magnetic biochar in wastewater treatment has shown significant effects and attracted scholars' attention. However, due to the relatively short research time and the lack of systematic summaries, it is difficult to provide a more in-depth analysis. This study utilizes RStudio and CiteSpace software to comprehensively analyze the research trends and progress of magnetic biochar in wastewater treatment. The analysis of bibliometrics is performed on 551 relevant papers retrieved from the Web of Science, spanning the period between 2011 and 2022. The most influential countries, institutions, journals, disciplinary distribution, and top 10 authors and papers in this field have been identified. The latest dataset has been used for keyword clustering and burst analysis. The results indicated that: (1) Bin Gao is the most influential author in this field, and high-level journals such as Bioresource Technology are more inclined to publish articles in the field of magnetic biochar. (2) Research in this field has predominantly focused on the removal of heavy metals and organic compounds. Keyword burst analysis shows a shift in research direction towards the removal of complex organic pollutants recently. (3) For the future development of magnetic biochar, an environment-friendly approach, economic viability, and joint technology are the directions that need more exploration. Finally, this paper provides a summary of the various adsorption mechanisms of magnetic biochar and several common modification methods, aiming to assist scholars in their research endeavors.

Efficient Adsorption Capacity of MgFe-Layered Double Hydroxide Loaded on Pomelo Peel Biochar for Cd (II) from Aqueous Solutions: Adsorption Behaviour and Mechanism

A novel pomelo peel biochar/MgFe-layered double hydroxide composite (PPBC/MgFe-LDH) was synthesised using a facile coprecipitation approach and applied to remove cadmium ions (Cd (II)). The adsorption isotherm demonstrated that the Cd (II) adsorption by the PPBC/MgFe-LDH composite fit the Langmuir model well, and the adsorption behaviour was a monolayer chemisorption. The maximum adsorption capacity of Cd (II) was determined to be 448.961 (±12.3) mg·g^-1 from the Langmuir model, which was close to the actual experimental adsorption capacity 448.302 (±1.41) mg·g^-1. The results also demonstrated that the chemical adsorption controlled the rate of reaction in the Cd (II) adsorption process of PPBC/MgFe-LDH. Piecewise fitting of the intra-particle diffusion model revealed multi-linearity during the adsorption process. Through associative characterization analysis, the adsorption mechanism of Cd (II) of PPBC/MgFe-LDH involved (i) hydroxide formation or carbonate precipitation; (ii) an isomorphic substitution of Fe (III) by Cd (II); (iii) surface complexation of Cd (II) by functional groups (-OH); and (iv) electrostatic attraction. The PPBC/MgFe-LDH composite demonstrated great potential for removing Cd (II) from wastewater, with the advantages of facile synthesis and excellent adsorption capacity.

Magnetic layered double hydroxide-based composites as sustainable adsorbent materials for water treatment applications: Progress, challenges, and outlook

Layered double hydroxides (LDHs) have shown exciting applications in water treatment because of their unique physicochemical properties, which include high surface areas, tunable chemical composition, large interlayer spaces, exchangeable content in interlayer galleries, and ease of modification with other materials. Interestingly, their surface, as well as the intercalated materials within the layers, play a role in the adsorption of the contaminants. The surface area of LDH materials can be further enhanced by calcination. The calcined LDHs can reattain their structural features upon hydration through the "memory effect" and may uptake anionic species within their interlayer galleries. Besides, LDH layers are positively charged within the aqueous media and can interact with specific contaminants through electrostatic interactions. LDHs can be synthesized using various methods, allowing the incorporation of other materials within the layers or forming composites that can selectively capture target pollutants. They have been combined with magnetic nanoparticles to improve their separation after adsorption and enhance adsorptive features in many cases. LDHs are relatively greener materials because they are mostly composed of inorganic salts. Magnetic LDH-based composites have been widely employed for the purification of water contaminated with heavy metals, dyes, anions, organics, pharmaceuticals, and oil. Such materials have shown interesting applications for removing contaminants from real matrices. Moreover, they can be easily regenerated and used for several adsorption-desorption cycles. Magnetic LDHs can be regarded as greener and sustainable because of several green aspects in their synthesis and reusability. We have critically reviewed their synthesis, applications, factors affecting their adsorption performance, and related mechanisms in this review. In the end, some challenges and perspectives are also discussed.

Remediation of Cu and As contaminated water and soil utilizing biochar supported layered double hydroxide: Mechanisms and soil environment altering

Preparing materials for simultaneous remediation of anionic and cationic heavy metals contamination has always been the focus of research. Herein a biochar supported FeMnMg layered double hydroxide (LDH) composites (LB) for simultaneous remediation of copper and arsenic contamination in water and soil has been assembled by a facile co-precipitation approach. Both adsorption isotherm and kinetics studies of heavy metals removal by LB were applied to look into the adsorption performance of adsorbents in water. Moreover, the adsorption mechanisms of Cu and As by LB were investigated, showing that Cu in aqueous solution was removed by the isomorphic substitution, precipitation and electrostatic adsorption while As was removed by complexation. In addition, the availability of Cu and As in the soil incubation experiments was reduced by 35.54%-63.00% and 8.39%-29.04%, respectively by using LB. Meanwhile, the addition of LB increased the activities of urease and sucrase by 93.78%-374.35% and 84.35%-520.04%, respectively, of which 1% of the dosage was the best. A phenomenon was found that the richness and structure of microbial community became vigorous within 1% dosage of LB, which indirectly enhanced the passivation and stabilization of heavy metals. These results indicated that the soil environment was significantly improved by LB. This research demonstrates that LB would be an imaginably forceful material for the remediation of anionic and cationic heavy metals in contaminated water and soil.

Adsorption of Pb (II) and Cu (II) by magnetic beads loaded with xanthan gum

Green and environmentally friendly and efficient separation adsorbents have attracted much attention in the treatment of heavy metal ions wastewater. In this study, xanthan gum (XG) was supported by fly ash magnetic beads (FAMB) to prepare adsorbent XG@FAMB. The effects of XG@FAMB dosage, pH value of the solution, adsorption time, and initial Pb (II) and Cu (II) concentration on its adsorption performance for Pb (II) and Cu (II) were investigated. The results show that under the conditions of pH 6, dosage of XG@FAMB 4.0 g/L, adsorption time 120 min, and initial concentration 60 mg/L, the maximum adsorption capacity of XG@FAMB for Pb (II) and Cu (II) was 14.93 mg/g and 14.88 mg/g, respectively. The adsorption process of Pb (II) and Cu (II) by XG@FAMB could be better described by the quasi-second-order kinetic model and Langmuir isothermal adsorption model, that is, the adsorption process is monolayer adsorption controlled by chemical action. The adsorption mechanism is that Pb (II) and Cu (II) coordinate with oxygen-containing functional groups hydroxyl and carboxyl on XG@FAMB surface, accompanied by electrostatic adsorption. XG@FAMB has the advantages of environmental protection of XG and easy solid-liquid separation of FAMB, and has a good removal effect on Pb (II) and Cu (II).

Effects and mechanism on cadmium adsorption removal by CaCl2-modified biochar from selenium-rich straw

As every-one knows, cadmium contamination poses a significant and permanent threat to people and aquatic life. Therefore, research on how to remove cadmium from wastewater is essential to protect the natural environment. In this study, agricultural and forestry waste straw sprayed with selenium-enriched foliar fertilizer was prepared as biochar, which was altered by calcium chloride (CaCl₂) to remove Cd²⁺ from water. The outcomes demonstrated that biochar generated by pyrolysis at 700 °C (BC700) had the best adsorption effect. Secondly, pseudo-second-order kinetics and Langmuir adsorption models were used to predict the Cd²⁺ adsorption. Finally, electrostatic adsorption, ion exchange, and complexation of oxygen functional groups (OFGs) were demonstratedto be the main adsorption mechanisms. These conclusions indicate that selenium-rich straw biochar is a novel adsorbent for agroforestry waste recovery. Meanwhile, this work will offer a promising strategy for the overall utilization of rice straw.

Effect of CeO2-Reinforcement on Pb Absorption by Coconut Coir-Derived Magnetic Biochar

Magnetic separable biochar holds great promise for the treatment of Pb²⁺-contaminated wastewater. However, the absorption effect of unmodified magnetic biochar is poor. Considering this gap in knowledge, CeO₂-doped magnetic coconut coir biochar (Ce-MCB) and magnetic coconut coir biochar (MCB) for Pb²⁺ absorption were prepared by the impregnation method, and the efficiency of Ce-MCB for Pb²⁺ absorption was evaluated in comparison with MCB. Conducting the absorption experiments, the study provided theoretical support for the exploration of the absorption mechanism. The quantitative analysis exposed that the enhanced absorption capacity of Ce-MCB was attributed to the increase in oxygen-containing functional groups and mineral precipitation. The Langmuir and Freundlich isotherm model showed that Ce-MCB is a suitable adsorbent for Pb²⁺. The absorption characteristics of Ce-MCB was fit well with the pseudo-second-order (PSO) and Langmuir models, which revealed that the absorption of Pb²⁺ in water was monolayer chemisorption with a maximum theoretical adsorption capacity of 140.83 mg·g^-1. The adsorption capacity of Ce-MCB for Pb(II) was sustained above 70% after four cycles. In addition, the saturation magnetization intensity of Ce-MCB was 7.15 emu·g^-1, which was sufficient to separate out from the solution. Overall, Ce-MCB has wide application prospects in terms of biomass resources recycling and environmental conservation.

Study on Efficient Adsorption Mechanism of Pb2+ by Magnetic Coconut Biochar

Lead ion (Pb²⁺) in wastewater cannot be biodegraded and destroyed. It can easily be enriched in living organisms, which causes serious harm to the environment and human health. Among the existing treatment technologies, adsorption is a green and efficient way to treat heavy metal contamination. Novel KMnO₄-treated magnetic biochar (KFBC) was successfully synthesized by the addition of Fe(NO₃)₃ and KMnO₄ treatment during carbonization following Pb²⁺ adsorption. SEM-EDS, XPS, and ICP-OES were used to evaluate the KFBC and magnetic biochar (FBC) on the surface morphology, surface chemistry characteristics, surface functional groups, and Pb²⁺ adsorption behavior. The effects of pH on the Pb²⁺ solution, initial concentration of Pb²⁺, adsorption time, and influencing ions on the adsorption amount of Pb²⁺ were examined, and the adsorption mechanisms of FBC and KFBC on Pb²⁺ were investigated. The results showed that pH had a strong influence on the adsorption of KFBC and the optimum adsorption pH was 5. The saturation adsorption capacity fitted by the model was 170.668 mg/g. The successful loading of manganese oxides and the enhanced oxygen functional groups, as evidenced by XPS and FTIR data, improved KFBC for heavy metal adsorption. Mineral precipitation, functional group complexation, and π-electron interactions were the primary adsorption processes.

Engineered biochar supported layered double hydroxide-cellulose nanocrystals composite-: Synthesis, characterization and azo dye removal performance

In this work, engineered biochar decorated layered double hydroxides and cellulose nanocrystals (B-CuFe-CNC) biocomposites were synthesized by the facile ultrasonicated-co-precipitation technique. The biocomposite was investigated for purification of Eriochrome Black T (EBT) dye from water. The characterization results showed that the presence of CNC in biochar-layered double hydroxides resulted in a two-dimensional rod-like structure with excellent crystallinity, improved surface functionalities, and provides an attractive platform for the enhanced adsorption of azo anionic dye molecules. The adsorption system was appropriately demonstrated by the BBD-RSM (R² > 0.994). The biocomposite exhibited higher EBT adsorption in the acidic pH range (2-5) due to strong electrostatic and chemical interactions. The kinetic and isotherm results were well demonstrated by pseudo-second order, Freundlich, and Redlich Peterson models. The maximum adsorption capacity of biocomposite was 876.2 mg/g achieved within 45 min. The spectroscopic analyses imply that the high removal of EBT by biocomposite is mainly governed by electrostatic attraction, hydrogen bonding, and chemical/metal complexation mechanisms. The biocomposite maintained high EBT removal after six successive adsorption cycles and excellent dye adsorption in the different water matrices. The results suggest that tailoring biochar properties with layered double hydroxide and CNC is a promising way for the enhanced removal of dye contaminants from wastewater.

Alfalfa biochar supported Mg-Fe layered double hydroxide as filter media to remove trace metal(loid)s from stormwater

Polluted stormwater (PSW) treatment is becoming increasingly important because of the existence of multiple pollutants from non-point pollution sources. Alfalfa biochar loaded with Mg/Fe layered double hydroxide (AF-LDH) was successfully synthesized to remove trace metal(loid)s from stormwater. The adsorption kinetics and isotherms of metal(loid)s in a mono-component system and the reusability of the composite materials was investigated in this study. The result showed that the maximum removal efficiency for Pb(II), Cu(II), Zn(II), Cd(II), As(V), and Cr(VI) were 98.98 %, 98.11 %, 97.88 %, 97.71 %, 98.81 %, and 50.89 %, respectively, when added calcined AF-LDH (AF-LDO) composite material to the multi-component solution. The AF-LDH and AF-LDO could efficiently remove trace pollutants (10-100 μg/L) from multi-component solution, especially for AF-LDO, which could completely remove the tested six trace metal(loid)s. Furthermore, Fourier transform infrared spectra and X-ray diffraction characterizations supported the Mg/Fe layered double hydroxide reconstruction. The main mechanisms of Pb(II), Cu(II), Zn(II), and Cd(II) (cationic metals) removal were ion exchange and surface precipitation, whereas As(V) and Cr(VI) (anionic metals) were mainly dislodged through the formation of surface complexation, electrostatic attraction, and interlayer anion exchange, concerning the -OH and -COOH of AF-LDH. Importantly, the results of the column experiment demonstrated that AF-LDO was superior to AF-LDH for anionic metal removal from stormwater. In this study, we synthesized AF-LDH and AF-LDO for trace metal(loid) removal and proposed a new and practical approach for stormwater purification.

Functionalized biochars: Synthesis, characterization, and applications for removing trace elements from water

Biochar (BC) has been recognized as an effective adsorbent to remove trace elements (TEs) from water. However, low surface functionality and small pore size can limit the adsorption ability of pristine biochar. These limitations can be addressed by using functionalized biochars which are developed by physical, chemical, or biological activation of biochar to improve their physico-chemical properties and adsorption efficiency. Despite the large amount of research concerning functionalized biochars in recent decades, to our knowledge, no comprehensive review of this topic has been published. This review focuses solely on the synthesis, characterization, and applications of functionalized/engineered biochars for removing TEs from water. Firstly, we evaluate the synthesis of functionalized biochars by physical, chemical, and biological strategies that yield the desired properties in the final product. The following section describes the characterization of functionalized biochars using various techniques (SEM, TEM, EDS, XRD, XANES/NEXAFS, XPS, FTIR, and Raman spectroscopy). Afterward, the role of functionalized biochars in the adsorption of different TEs from water/wastewater is critically evaluated with an emphasis on the factors affecting sorption efficiency, sorption mechanisms, fate of sorbed TEs from contaminated environments and associated challenges. Finally, we specifically scrutinized the future recommendations and research directions for the application of functionalized biochar. This review serves as a comprehensive resource for the use of functionalized biochar as an emerging environmental material capable of removing TEs from contaminated water/wastewater.

Applications of functionalized magnetic biochar in environmental remediation: A review

Magnetic biochar (MBC) is extensively applied on contaminants removal from environmental medium for achieving environmental-friendly remediation with reduction of secondary pollution owing to its easy recovery and separation. However, the summary of MBC synthesis methods is still lack of relevant information. Moreover, the adsorption performance for pollutants by MBC is limited, and thus it is imperative to adopt modification techniques to enhance the removal ability of MBC. Unfortunately, there are few reviews to present modification methods of MBC with applications for removing hazardous contaminants. Herein, we critically reviewed (i) MBC synthetic methods with corresponding advantages and limitations; (ii) adsorption mechanisms of MBC for heavy metals and organic pollutants; (iii) various modification methods for MBC such as functional groups grafting, nanoparticles loading and element doping; (iv) applications of modified MBC for hazardous contaminants adsorption with deep insight to relevant removal mechanisms; and (v) key influencing conditions like solution pH, temperature and interfering ions toward contaminants removal. Finally, some constructive suggestions were put forward for the practical applications of MBC in the near future. This review provided a comprehensive understanding of using functionalized MBC as effective adsorbent with low-cost and high-performance characteristics for contaminated environment remediation.

Efficient adsorption of Pb(II) by sodium dodecyl benzene sulfonate intercalated calcium aluminum hydrotalcites: kinetic, isotherm, and mechanisms

Two novel adsorbents of CaAl-LDHs and sodium dodecyl benzene sulfonate (SDBS) intercalated CaAl-LDHs (SDBS-CaAl-LDHs) were successfully prepared by co-precipitation. The main composition and physical properties of two samples were characterized by XRD, XPS, FT-IR, TG, and SEM. Batch adsorption experiments were conducted to study the effect of pH, adsorption time, and initial concentration of Pb²⁺. The results showed that the prime adsorption conditions obtained were pH of 5.2 after 60 min with the initial concentration of 300 mg g^-1 for CaAl-LDHs and 350 mg g^-1 for SDBS-CaAl-LDHs. At 303 K, the adsorption capacities and removal rates of CaAl-LDHs and SDBS-CaAl-LDHs were found to be 456.05 mg g^-1, 91.21% and 682.26 mg g^-1, 97.47%, respectively. For CaAl-LDHs, the kinetic data for Pb²⁺ was best fitted with pseudo-2nd-order model, and the adsorption isotherms followed Langmuir and Freundlich isotherm model. The adsorption data of SDBS-CaAl-LDHs can be best described by the pseudo-second-order kinetic and Langmuir model. The Pb²⁺ adsorption mechanism on SDBS-CaAl-LDHs was explored by XRD, XPS, and SEM, and the important roles of the electrostatic attraction, precipitation, complexation, and ion exchange were demonstrated. The Langmuir adsorption capacities for SDBS-CaAl-LDHs were 797.63, 828.76, and 854.29 mg g^-1 at 293 k, 303 k, and 313 k, respectively. Thus, SDBS-CaAl-LDHs may be a highly economical adsorbent for the treatment of contaminated water.

Pre-magnetic bamboo biochar cross-linked CaMgAl layered double-hydroxide composite: High-efficiency removal of As(III) and Cd(II) from aqueous solutions and insight into the mechanism of simultaneous purification

Trivalent arsenic (As(III)) and divalent cadmium (Cd(II)) contamination in water environment is an urgent issue because of their most toxic physicochemical properties. Herein, the simultaneous purification of As(III) and Cd(II) from aqueous solution was achieved by use of a pre-magnetic Fe modified bamboo biochar that cross-linked CaMgAl layered double-hydroxide composite (Fe-BC@LDH). In a binary system, adsorption equilibrium of As(III) and Cd(II) onto specific sorbent Fe-BC@LDH was reached within 100 and 10 min of contact time under anaerobic conditions, respectively, and the maximum adsorption capacities of As(III) and Cd(II) by Fe-BC@LDH were respectively calculated to be ⁓265.3 and ⁓320.7 mg/g at pH 4.5 and 5- and 14-times than that of unmodified biochar. Moreover, adsorption in a competitive or single system, the sorbent displayed a greater preference for Cd(II). Importantly, the removal of As(III) and Cd(II) onto the composite was more favorable in a binary system due to formation of ternary FeOCdAs bonding configuration as well as the redox transformation of As(III) to As(V), inner-sphere complexation of MOAs/Cd (MFe, Ca, Mg, Al), electrostatic attraction, and co-precipitation of scorodite and hydroxy‑iron‑cadmium. Furthermore, the nanocomposite was still highly efficient after 5 adsorption cycles. This study demonstrated that the synthesized cost-effective Fe-BC@LDH is a promising candidate for the simultaneous separation of As(III) and Cd(II) from wastewater.

Ethylenediaminetetraacetate functionalized MgFe layered double hydroxide/biochar composites for highly efficient adsorptive removal of lead ions from aqueous solutions

The application of layered double hydroxides (LDHs) of MgFe and its composites with biochar of Eucalyptus camdulensis (Eb) and ethylenediaminetetraacetic acid (EDTA) was explored in a batch study to mitigate toxic lead ions (Pb²⁺) from synthetic wastewater solutions. SEM images revealed that MgFe/LDH composites with Eb were successfully formed, while FTIR spectra confirmed the successful adsorption of Pb²⁺ onto the MgFe/LDH and composite adsorbents. Batch equilibrium was attained after 60 min, then the adsorption capacity gradually increased. An increase in adsorption capacity (and a 60% decrease in the percentage removal) was observed by increasing the initial Pb²⁺ concentration, and the highest value was 136 mg g^-1 for MgFe/LDH-Eb_EDTA. A 50–60% increase in both the adsorption capacities and percent removal was seen in the pH range of 2–6. The second-order kinetic model had a nearly perfect fitting, suggesting that chemisorption was the mechanism controlling adsorption. The Langmuir isotherm model best presented the adsorption data, suggesting that the Pb²⁺ adsorption was monolayer, and predicted a better affinity between the adsorbent surface and absorbed Pb²⁺ for MgFe/LDH-Eb_EDTA in comparison to the other two adsorbents. The D–R isotherm suggested that the adsorption system was physical based on E values for all three adsorbents, while the Temkin isotherm model suggested that Pb²⁺ adsorption was heterogeneous. Finally, the Sips and R–P isotherms predicted that the adsorption of Pb²⁺ on the surface of the adsorbents was homogeneous and heterogeneous.

Synergistic effects of ball-milled biochar-supported exfoliated LDHs on phosphate adsorption: Insights into role of fine biochar support

Although biochar supports were widely adopted to fabricate the biochar (BC) supported layered double hydroxides (LDHs) composites (LDH-BC) for efficient environmental remediation, few studies focus on the important role of biochar support in alleviating the stacking of LDHs and enhancing LDH-BC's performance. Through the analysis of the material structure-performance relationship, the "support effect" of fine biochar prepared by ball milling was carefully explored. Compared with the original LDHs on LDH-BC, the LDHs on ball milled biochar (LDH-BMBC) had smaller particle size (from 1123 nm to 586 nm), crystallite size (from 20.5 nm to 6.56 nm), more abundant O-containing functional groups, and larger surface area (370 m² g^-1) and porous structure. The Langmuir model revealed that the maximum theoretical phosphate adsorption capacity of LDH-BMBC (56.2 mg P g^-1) was significantly higher than that of LDH-BC (27.6 mg P g^-1). The leaching experiment proved that the addition of LDH-BMBC in calcareous soil could significantly reduce the release of soil total phosphate (46.1%) and molybdate reactive phosphate (40.4%), even though pristine BC and BMBC significantly enhanced the soil phosphate leaching. This work fabricated high-performance and eco-friendly LDH-BMBC for phosphate adsorption in solution and phosphate retention in soil and also provide valuable insights into fine biochar support effect on LDHs exfoliation, extending the practical use of the engineered ball milled biochars in environment remediation.

Optimizing magnetic functionalization conditions for efficient preparation of magnetic biochar and adsorption of Pb(II) from aqueous solution

Recoverable magnetic biochar has great potential for treating wastewater contaminants such as Pb(II). However, whether magnetic modification could enhance metal adsorption efficiency is currently contradictory in the literature mainly due to the differences in selecting various magnetic functionalization conditions. Considering this gap in knowledge, the effects of magnetic functionalization method (impregnation and precipitation), concentration of precursor iron solution (0.01-1 M), and pyrolysis temperature (300-700 °C) on the characteristics and Pb(II) adsorption capacity of biochar were systematically investigated in this paper. Results indicated that Fe₃O₄ was the main product for magnetic biochars synthesized using the impregnation (denoted as FWFe(3)) and precipitation methods (denoted as FWFe(2)). Magnetic functionalization resulted in remarkably increased pH and more negative zeta potential for FWFe(2) samples, whereas FWFe(3) samples showed the opposite trends. The adsorption of Pb(II) on different biochars fitted the pseudo-second order model and the Langmuir model. The maximum adsorption capacity was 817.64 mg/g for FWFe(2)1M700C (precipitation by 1 M of Fe(II)/Fe(III), pyrolysis at 700 °C), outperforming FWFe(3) and pristine biochar samples by around 5-13 times. Mechanism study indicated that the adsorption mainly involved electrostatic attraction, ion exchange, co-precipitation, and complexation. Pb(II) adsorption capacity was strongly dependent on the alkali pH of biochar. However, this efficiency was less affected by biochar surface area and its morphology. The higher pH of FWFe(2) samples not only led to an increased surface charge for stronger electrostatic attraction and ion exchange but also favored the formation of co-precipitates. By contrast, FWFe(3) samples showed a decreased adsorption capacity for Pb(II) with increased concentration of embedded iron. Overall, magnetic biochar, prepared using precipitation followed by high-temperature pyrolysis (such as, FWFe(2)1M700C), can be a promising adsorbent for Pb(II) adsorption from wastewater.

High-efficiency removal of lead/cadmium from wastewater by MgO modified biochar derived from crofton weed

The adsorption performance and mechanisms of Pb²⁺ and Cd²⁺ in wastewater using MgO modified biochar derived from crofton weed (MBCW600) are investigated. The Pb²⁺ and Cd²⁺ adsorption capacities of MBCW600 by the Hill model reach 384.08 mg/g and 207.02 mg/g, respectively, which is larger than that of original biochar. Pb²⁺ could be more easily captured by MBCW600 compared to Cd²⁺ in the multimetal system. Mg²⁺ contributes to Pb²⁺ and Cd²⁺ adsorption among coexisting cations. The exhausted MBCW600 could be well regenerated by simple method after use. The adsorption mechanism study indicates that Pb²⁺ and Cd²⁺ removal are primary contributed to mineral precipitation and ion exchange. The effective treatment volumes of Pb²⁺ and Cd²⁺ wastewater achieve 3050 mL and 2150 mL in the fixed-bed column experiment, respectively. Therefore, MBCW600 presents remarkable adsorption capability, excellent recoverability and large throughput, which shows the potential application in future treatment of wastewater containing heavy metal.

Synthesis of tri-metallic surface engineered nanobiochar from cynodon dactylon residues in a single step - Batch and column studies for the removal of copper and lead ions

Superparamagnetic nanocomposites integrated with multiple metals, and surface engineered nanoparticles play a vital role in the removal of heavy metals. In the present study, amino-functional silica-coated magnetic nanocomposites with biochar synthesised from Cynodon dactylon plant residues are prepared in a single step reaction process. The synthesised nanocomposites are characterized using various analytical techniques such as FTIR to determine their functional entities, SEM, TEM, EDX and VSM to analyse the size (~50 nm), elements and magnetic nature of the nanocomposites. Characterization reveals that the prepared nanobiochar was coated with silica and a specific amine group. The magnetic saturation value of 50 emu/g confirms the prepared sorbent was superparamagnetic. Kinetics, isotherm and thermodynamics parameters are evaluated to study the metal interaction mechanism with the nanocomposites where the system follows pseudo-second-order kinetics and the four-parameter Fritz Schlunder model for both metal ions. The nanocomposites showed the enhanced adsorption capacity of copper (Cu(II)) ions with 220.4 mg/g and 185.4 mg/g for lead (Pb(II)) ions. The nanocomposites also showed the excessive reusing ability of 15 times with the maximum removal efficiency for Cu(II) and Pb(II) metal ions. Column studies are evaluated to demonstrate the vital performance in the removal of Cu(II) ions and the breakthrough point was inferred for the parameters such as concentration (100-300 mg/L), bed height (1-3 cm) and flow rate (2-4 mL/min). The breakthrough point was attained at 1400 min and the removal efficiency of about 64.58% was obtained.

Bioengineered biochar as smart candidate for resource recovery toward circular bio-economy: a review

Biochar's ability to mediate and facilitate microbial contamination degradation, as well as its carbon-sequestration potential, has sparked interest in recent years. The scope, possible advantages (economic and environmental), and future views are all evaluated in this review. We go over the many designed processes that are taking place and show why it is critical to look into biochar production for resource recovery and the role of bioengineered biochar in waste recycling. We concentrate on current breakthroughs in the fields of engineered biochar application techniques to systematically and sustainable technology. As a result, this paper describes the use of biomass for biochar production using various methods, as well as its use as an effective inclusion material to increase performance. The impact of biochar amendments on microbial colonisation, direct interspecies electron transfer, organic load minimization, and buffering maintenance is explored in detail. The majority of organic and inorganic (heavy metals) contaminants in the environment today are caused by human activities, such as mining and the use of chemical fertilizers and pesticides, which can be treated sustainably by using engineered biochar to promote the establishment of a sustainable engineered process by inducing the circular bioeconomy.

Decorated Mn-ferrite nanoparticle@Zn-Al layered double hydroxide@Cellulose@ activated biochar nanocomposite for efficient remediation of methylene blue and mercury (II)

An innovative magnetic nanocomposite was designed and fabricated by the functionalization and support of magnetic Mn-ferrite nanoparticle (MnFe₂O₄) with layered double hydroxide (Zn-Al LDHs) on cellulose and activated grapes stalks-derived biochar (AGB) (MnFe₂O₄@Zn-Al LDHs@Cel@AGB), to incorporate active functionalities and fantastic features with the aim to explore its feasibility for removal of harmful cationic species as methylene blue dye (MB) and mercury ions from wastewater. Structural, composition, morphological, surface area, adsorption performance of the fabricated nanocomposite toward both MB and Hg(II) and reusability were also investigated. The results referred that 10 mg ofthe nanocomposite exhibited 97.4% and 84.0 % removal efficiency of 10mgL^-1 MB dye and 0.1 mol L^-1 Hg(II) at 25 and 30 min contact times, respectively. Adsorption isotherms and kinetics of the two pollutants (MB and Hg(II)) were both governed by the pseudo-second-order equation with possible participation of intraparticle diffusion mechanism.

Further reuse of phosphorus-laden biochar for lead sorption from aqueous solution: Isotherm, kinetics, and mechanism

Biochar and engineered biochar have been used for phosphorous recovery from wastewater, but the resulted phosphorous-laden (P-laden) biochar needs further disposal. In this study, the feasibility of reusing P-laden biochar for Pb immobilization as well as the underlying mechanism was explored. Three types of engineered biochar, i.e., Ca modified biochar, Mg modified biochar, and Fe modified biochar, were selected to sorb P and then the exhausted biochar was further used for Pb sorption. Results showed that Mg and Ca modified biochar exhibited considerable Pb sorption capacity after P sorption with the maximum value of 3.36-4.03 mmol/g and 5.49-6.58 mmol/g, respectively, while P-laden Fe modified biochar failed to sorb Pb due to its acidic pH. The removal of Pb by P-laden Mg modified biochar involved more precipitation including PbHPO₄, Pb₅(PO₄)₃(OH), and Pb₃(CO₃)₂(OH)₂ because of its higher P sorption capacity and more -OH group on the surface. Cation exchange with CaCO₃ to form PbCO₃ was the main mechanism for Pb removal by P-laden Ca modified biochar despite the formation of Pb₅(PO₄)₃(OH) precipitate. Our results demonstrate that waste P-laden biochar can be further used for the effective removal of Pb, which provides a potential approach for waste adsorbent disposal.

Synthesis of Magnetic Adsorbents Based Carbon Highly Efficient and Stable for Use in the Removal of Pb(II) and Cd(II) in Aqueous Solution

In this study, two alternative synthesis routes for magnetic adsorbents were evaluated to remove Pb(II) and Cd(II) in an aqueous solution. First, activated carbon was prepared from argan shells (C). One portion was doped with magnetite (Fe₃O₄+C) and the other with cobalt ferrite (CoFe₂O₄+C). Characterization studies showed that C has a high surface area (1635 m² g⁻¹) due to the development of microporosity. For Fe₃O₄+C the magnetic particles were nano-sized and penetrated the material’s texture, saturating the micropores. In contrast, CoFe₂O₄+C conserves the mesoporosity developed because most of the cobalt ferrite particles adhered to the exposed surface of the material. The adsorption capacity for Pb(II) was 389 mg g⁻¹ (1.88 mmol g⁻¹) and 249 mg g⁻¹ (1.20 mmol g⁻¹); while for Cd(II) was 269 mg g⁻¹ (2.39 mmol g⁻¹) and 264 mg g⁻¹ (2.35 mmol g⁻¹) for the Fe₃O₄+C and CoFe₂O₄+C, respectively. The predominant adsorption mechanism is the interaction between -FeOH groups with the cations in the solution, which are the main reason these adsorption capacities remain high in repeated adsorption cycles after regeneration with HNO₃. The results obtained are superior to studies previously reported in the literature, making these new materials a promising alternative for large-scale wastewater treatment processes using batch-type reactors.

Application of layered double hydroxide-biochar composites in wastewater treatment: Recent trends, modification strategies, and outlook

In recent years, layered double hydroxide-biochar (LDH-BC) composites as adsorbents and catalysts for contaminants removal (inorganic anions, heavy metals, and organics) have received increasing attention and became a new research point. It is because of the good chemical stability, abundant surface functional groups, excellent anion exchange ability, and good electronic properties of LDH-BC composites. Hence, we offer an overall review on the developments and processes in the synthesis of LDH-BC composites as adsorbents and catalysts. Special attention is devoted to the strategies for enhancing the properties of LDH-BC composites, including (1) magnetic treatment, (2) acid treatment, (3) alkali treatment, (4) controlling metal ion ratios, (5) LDHs intercalation, and (6) calcination. In addition, further studies are called for LDH-BC composites and potential areas for future application of LDH-BC composites are also proposed.

Efficient performance of magnesium oxide loaded biochar for the significant removal of Pb2+ and Cd2+ from aqueous solution

Lead (Pb) and cadmium (Cd) are considered as a typical heavy metals in aqueous solution, which may pose adverse health effects on human beings. For the removal of these two pollutants, magnesium oxide (MgO) was successfully immobilized onto eucalyptus biochar (BC) matrix via simple and cost-effective pyrolysis process of MgCl₂-pretreated eucalyptus biomass under high temperature (500 °C). Synthesized MgO nanoparticles-biochar composites (MBC) exhibited superior removal performance for target pollutants, and achieve 99.9% removal efficiency for Pb(II) and Cd(II) at optimum conditions (0.02 g, pH in range of 4-7, and reaction time 120, 240 min). Furthermore, the maximum theoretical adsorbing amount of MBC was 829.11 mg/g for Pb(II) and 515.17 mg/g for Cd(II). Pseudo-second-order model and Langmuir models were well-determined for isotherm and adsorption kinetics. FTIR, XRD, and XPS analysis revealed that precipitation and ion exchange was of great importance for the removal of contaminants. Besides, cation-π interaction and complexation from the carbon-containing functional groups should not be neglected. Considering the advantage of low-cost, facile preparation, and brilliant adsorption capacity, it is anticipated that MBC has a promising prospect for the broad application in Pb(II)/Cd(II)-containing wastewater treatment.

A Novel Calcium Oxalate/Sepiolite Composite for Highly Selective Adsorption of Pb(II) from Aqueous Solutions

Synthesizing functional nanomaterials from naturally abundant clay has always been of vital importance for resource utilization, however, the lack of new methods to effectively utilize low-grade clay presents a significant challenge. Herein, a calcium oxalate/sepiolite nanocomposite (SMN-x) was prepared by using the water bath heating method to convert the associated calcium carbonate in low-grade sepiolite into calcium oxalate. The developed composite was subsequently used to remove Pb(II) from the aqueous solutions. The SMN-3 adsorbent prepared by heating in a water bath at 90 °C for 3 h (with a high specific surface area of 234.14 m2·g−1) revealed the maximum Pb(II) adsorption capacity of 504.07 mg·g−1 at pH 5, which was about five times higher than that of sepiolite (105.57 mg·g−1). Further, the SMN-3 adsorbent possessed a much higher selectivity for Pb(II) as compared to the other metal ions. Moreover, the residue was noted to be stable and safe. The adsorption kinetics and isotherms conformed to the quasi-second-order kinetic and Langmuir models. During the adsorption process, ion exchange was noted to the main mechanism, however, it was also accompanied by electrostatic attraction. This study provides a novel strategy for the sustainable development of simple and efficient adsorbents by utilizing low-grade clay minerals.