A versatile cyclic dipeptide hydrogelator: Self-assembly and rheology in various physiological conditions

Structural and vibrational analysis of glycyl-L-phenylalanine and phase transition under high-pressure

The structural and vibrational properties of the glycyl-L-phenylalanine dipeptide were investigated using vibrational spectroscopy (Raman and infrared) and first-principle calculations. Raman spectroscopy measurements were performed between 100 and 3200 cm-1 and infrared spectroscopy from 100 and 3200 cm-1 under ambient conditions. The conformational analysis of the zwitterionic form of the dipeptide was performed using the B3LYP functional, the 6-311++ base set and the Polarizable Continuum Model of solvation, determining the lowest energy conformation and assigning the vibrational modes. The effect of pressure on the glycyl-1-phenylalanine crystal was investigated using the Raman spectroscopy between 0.0 and -7.1 GPa in the spectral region of 100 - 3200 cm-1. As a result, conformational changes around 1.0 GPa were observed in the lattice modes and in some internal modes, showing a reorganization of the molecule in the crystal. In the decompression process, it was observed that the conformational change is reversible and the original Raman spectrum is recoverd.

Biomedical applications of supramolecular hydrogels with enhanced mechanical properties

Supramolecular hydrogels bound by hydrogen bonding, host-guest, hydrophobic, and other non-covalent interactions are among the most attractive biomaterials available. Supramolecular hydrogels have attracted extensive attention due to their inherent dynamic reversibility, self-healing, stimuli-response, excellent biocompatibility, and near-physiological environment. However, the inherent contradiction between non-covalent interactions and mechanical strength makes the practical application of supramolecular hydrogels a great challenge. This review describes the mechanical strength of hydrogels mediated by supramolecular interactions, and focuses on the potential strategies for enhancing the mechanical strength of supramolecular hydrogels and illustrates their applications in related fields, such as flexible electronic sensors, wound dressings, and three-dimensional (3D) scaffolds. Finally, the current problems and future research prospects of supramolecular hydrogels are discussed. This review is expected to provide insights that will motivate more advanced research on supramolecular hydrogels.

Recent Advances in the Development of Biomimetic Materials

In this review, we focused on recent efforts in the design and development of materials with biomimetic properties. Innovative methods promise to emulate cell microenvironments and tissue functions, but many aspects regarding cellular communication, motility, and responsiveness remain to be explained. We photographed the state-of-the-art advancements in biomimetics, and discussed the complexity of a "bottom-up" artificial construction of living systems, with particular highlights on hydrogels, collagen-based composites, surface modifications, and three-dimensional (3D) bioprinting applications. Fast-paced 3D printing and artificial intelligence, nevertheless, collide with reality: How difficult can it be to build reproducible biomimetic materials at a real scale in line with the complexity of living systems? Nowadays, science is in urgent need of bioengineering technologies for the practical use of bioinspired and biomimetics for medicine and clinics.

Mixed cyclo di-amino acids structured edible oils: a potential hardstock fat mimic

Pure cyclic diamino acids (CdAA) gel differently than combinations of CdAAs, altering the gelation behavior to highly-branched colloidal protein crystal networks reminiscent of traditional fat crystal networks in canola oil, making it an exciting structuring agent for unsaturated oils.

A Novel Multifunctional Crosslinking PVA/CMCS Hydrogel Containing Cyclic Peptide Actinomycin X2 and PA@Fe with Excellent Antibacterial and Commendable Mechanical Properties

Bacterial infected environments and resulting bacterial infections have been threatening the human health globally. Due to increased bacterial resistance caused by improper and excessive use of antibiotics, antibacterial biomaterials are being developed as alternatives to antibiotics in some cases. Herein, an advanced multifunctional hydrogel with excellent antibacterial properties, enhanced mechanical properties, biocompatibility and self-healing performance, was designed through freezing-thawing method. This hydrogel network is composed of polyvinyl alcohol (PVA), carboxymethyl chitosan (CMCS), protocatechualdehyde (PA), ferric iron (Fe) and an antimicrobial cyclic peptide actinomycin X2 (Ac.X2). The double dynamic bonds among protocatechualdehyde (PA), ferric iron (Fe) and carboxymethyl chitosan containing coordinate bond (catechol-Fe) as well as dynamic Schiff base bonds and hydrogen bonds endowed the hydrogel with enhanced mechanical properties. Successful formation of hydrogel was confirmed through ATR-IR and XRD, and structural evaluation through SEM analysis, whereas mechanical properties were tested with electromechanical universal testing machine. The resulting PVA/CMCS/Ac.X2/PA@Fe (PCXPA) hydrogel has favorable biocompatibility and excellent broad-spectrum antimicrobial activity against both S. aureus (95.3 %) and E. coli (90.2 %) compared with free-soluble Ac.X2, which exhibited subpar performance against E. coli reported in our previous studies. This work provides a new insight on preparing multifunctional hydrogels containing antimicrobial peptides as antibacterial material.

Peptide hydrogels: Synthesis, properties, and applications in food science

Due to the unique and excellent biological, physical, and chemical properties of peptide hydrogels, their application in the biomedical field is extremely wide. The applications of peptide hydrogels are closely related to their unique responsiveness and excellent properties. However, its defects in mechanical properties, stability, and toxicity limit its application in the food field. In this review, we focus on the fabrication methods of peptide hydrogels through the physical, chemical, and biological stimulations. In addition, the functional design of peptide hydrogels by the incorporation with materials is discussed. Meanwhile, the excellent properties of peptide hydrogels such as the stimulus responsiveness, biocompatibility, antimicrobial properties, rheology, and stability are reviewed. Finally, the application of peptide hydrogel in the food field is summarized and prospected.

Three-dimensional (3D) bioprinting of medium toughened dipeptide hydrogel scaffolds with Hofmeister effect

Short peptide self-assembled hydrogels as 3D bioprinting inks show excellent biocompatibility and diverse functional expansion, and have broad application prospects in cell culture and tissue engineering. However, the preparation of biological hydrogel inks with adjustable mechanical strength and controllable degradation for 3D bioprinting still faces big challenges. Herein, we develop dipeptide bio-inks that can be gelled in-situ based on Hofmeister sequence, and prepare hydrogel scaffold by using a layer-by-layer 3D printing strategy. Excitingly, after the introduction of Dulbecco's Modified Eagle's medium (DMEM), which is necessary for cell culture, the hydrogel scaffolds show an excellent toughening effect, which matches the needs of cell culture. It's notable that in the whole process of preparation and 3D printing of hydrogel scaffolds, no cross-linking agent, ultraviolet (UV), heating or other exogenous factors are involved, ensuring high biosafety and biocompatibility. After two weeks of 3D culture, millimeter-sized cell spheres are obtained. This work provides an opportunity for the development of short peptide hydrogel bioinks without exogenous factors in 3D printing, tissue engineering, tumor simulant reconstruction and other biomedical fields.

Emerging Role of Injectable Dipeptide Hydrogels in Biomedical Applications

Owing to their properties such as biocompatibility, tunable mechanical properties, permeability toward oxygen, nutrients, and the ability to hold a significant amount of water, hydrogels have wide applications in biomedical research. They have been engaged in drug delivery systems, 3D cell culture, imaging, and extracellular matrix (ECM) mimetics. Injectable hydrogels represent a major subset of hydrogels possessing advantages of site-specific conformation with minimal invasive techniques. It preserves the inherent properties of drug/biomolecules and is devoid of any side effects associated with surgery. Various polymeric materials utilized in developing injectable hydrogels are associated with the limitations of toxicity, immunogenicity, tedious manufacturing processes, and lack of easy synthetic tunability. Peptides are an important class of biomaterials that have interesting properties such as biocompatibility, stimuli responsiveness, shear thinning, self-healing, and biosignaling. They lack immunogenicity and toxicity. Therefore, numerous peptide-based injectable hydrogels have been explored in the past, and a few of them have reached the market. In recent years, minimalistic dipeptides have shown their ability to form stable hydrogels through cooperative noncovalent interactions. In addition to inherent properties of lengthy peptide-based injectable hydrogels, dipeptides have the unique advantages of low production cost, high synthetic accessibility, and higher stability. Given the instances of expanding significance of injectable peptide hydrogels in biomedical research and an emerging recent trend of dipeptide-based injectable hydrogels, a timely review on dipeptide-based injectable hydrogels shall highlight various aspects of this interesting class of biomaterials. This concise review that focuses on the dipeptide injectable hydrogel may stimulate the current trends of research on this class of biomaterial to translate its significance as interesting products for biomedical applications.

Covalent Organic Frameworks as Efficient Photoinitiators and Cross-Linkers To Fabricate Highly Stretchable Hydrogels

In this work, two kinds of imine-type covalent organic framework (COF) nanoparticles are demonstrated as efficient photocatalytic initiators to trigger the free-radical polymerization of acrylamide (AM) to prepare polyacrylamide (PAM) hydrogels under visible light irradiation, without any assistance from the co-initiator. Simultaneously, the COF nanoparticles bearing vinyl side groups (COF-V) promote covalent cross-linking of the polymer chains, which significantly reinforces the mechanical properties of the nanocomposite hydrogel. The obtained PAM/COF-V hydrogel is highly stretchable with an extraordinary elongation up to 3300% strain. On the other hand, the COF nanoparticles modified with methoxy moieties (COF-OMe) endow the resulting PAM/COF-OMe hydrogel with a promising fluorescence feature. In addition, this strategy provides a visible-light-regulated photocatalytic polymerization approach with a simplified recipe to fabricate COF-based nanocomposite hydrogels or resins with diverse functions.

Self-Assembly of Homo- and Hetero-Chiral Cyclodipeptides into Supramolecular Polymers towards Antimicrobial Gels

There is an increasing interest towards the development of new antimicrobial coatings, especially in light of the emergence of antimicrobial resistance (AMR) towards common antibiotics. Cyclodipeptides (CDPs) or diketopiperazines (DKPs) are attractive candidates for their ability to self-assemble into supramolecular polymers and yield gel coatings that do not persist in the environment. In this work, we compare the antimicrobial cyclo(Leu-Phe) with its heterochiral analogs cyclo(D-Leu-L-Phe) and cyclo(L-Leu-D-Phe), as well as cyclo(L-Phe-D-Phe), for their ability to gel. The compounds were synthesized, purified by HPLC, and characterized by ¹H-NMR, ¹³C-NMR, and ESI-MS. Single-crystal X-ray diffraction (XRD) revealed details of the intermolecular interactions within the supramolecular polymers. The DKPs were then tested for their cytocompatibility on fibroblast cells and for their antimicrobial activity on S. aureus. Overall, DKPs displayed good cytocompatibility and very mild antimicrobial activity, which requires improvement towards applications.

Short Peptide-Based Smart Thixotropic Hydrogels †

Thixotropy is a fascinating feature present in many gel systems that has garnered a lot of attention in the medical field in recent decades. When shear stress is applied, the gel transforms into sol and immediately returns to its original state when resting. The thixotropic nature of the hydrogel has inspired scientists to entrap and release enzymes, therapeutics, and other substances inside the human body, where the gel acts as a drug reservoir and can sustainably release therapeutics. Furthermore, thixotropic hydrogels have been widely used in various therapeutic applications, including drug delivery, cornea regeneration and osteogenesis, to name a few. Because of their inherent biocompatibility and structural diversity, peptides are at the forefront of cutting-edge research in this context. This review will discuss the rational design and self-assembly of peptide-based thixotropic hydrogels with some representative examples, followed by their biomedical applications.

Hybrid Hydrogels from Nongelling Polymers Using a Fibrous Peptide Hydrogelator at Low Concentrations

Nature-made hydrogels typically combine a wide range of multiscale fibers into biological composite networks, which offer an adaptive property. Inspired by nature, we report a facile approach to construct hybrid hydrogels from a range of natural or commercially available synthetic nongelling polymers (e.g., poly(ethylene glycol), poly(acrylic acid), carboxylated cellulose nanocrystal, and sodium alginate) at a concentration as low as 0.53 wt % using a nonionic fibrous peptide hydrogelator. Through simply mixing the peptide hydrogelator with a polymer aqueous solution, stable hybrid hydrogels can be formed with the concentration of hydrogelator at ∼0.05 wt %. The gel strength of the resulting hydrogels can be effectively modulated by the concentration, molecular weight, and terminal group of the polymer. We further demonstrate that the molecular interactions between the peptide hydrogelator and the polymer are very crucial for the formation of hybrid hydrogel, which synergically induce the gelation at considerably low concentrations. A peptide hydrogelator can be easily obtained by aminolysis of alkyl-oilgo(γ-benzyl-l-glutamate) samples. Live/Dead assays indicate low cytotoxicity of the hybrid hydrogel toward HeLa cells. Combining the low-cost, scalable synthesis, and biocompatibility, the prepared peptide hydrogelator presents a potential candidate to expand the scope of polymer hydrogels for biomedical applications and also shows considerable commercial significance.

Supramolecular Peptide Nanofiber Hydrogels for Bone Tissue Engineering: From Multihierarchical Fabrications to Comprehensive Applications

Bone tissue engineering is becoming an ideal strategy to replace autologous bone grafts for surgical bone repair, but the multihierarchical complexity of natural bone is still difficult to emulate due to the lack of suitable biomaterials. Supramolecular peptide nanofiber hydrogels (SPNHs) are emerging biomaterials because of their inherent biocompatibility, satisfied biodegradability, high purity, facile functionalization, and tunable mechanical properties. This review initially focuses on the multihierarchical fabrications by SPNHs to emulate natural bony extracellular matrix. Structurally, supramolecular peptides based on distinctive building blocks can assemble into nanofiber hydrogels, which can be used as nanomorphology-mimetic scaffolds for tissue engineering. Biochemically, bioactive motifs and bioactive factors can be covalently tethered or physically absorbed to SPNHs to endow various functions depending on physiological and pharmacological requirements. Mechanically, four strategies are summarized to optimize the biophysical microenvironment of SPNHs for bone regeneration. Furthermore, comprehensive applications about SPNHs for bone tissue engineering are reviewed. The biomaterials can be directly used in the form of injectable hydrogels or composite nanoscaffolds, or they can be used to construct engineered bone grafts by bioprinting or bioreactors. Finally, continuing challenges and outlook are discussed.

S-Benzyl Cysteine Based Cyclic Dipeptide Super Hydrogelator: Enhancing Efficacy of an Anticancer Drug via Sustainable Release

Peptide based low molecular weight supramolecular hydrogels hold promising aspects in various fields of application especially in biomaterial and biomedical sciences such as drug delivery, wound healing, tissue engineering, cell proliferation, etc due to their extreme biocompatibility. Unlike linear peptides, cyclic peptides have more structural rigidity and tolerance to enzymatic degradation and high environmental stability which make them even better candidates for the above said applications. Herein, a new small cyclic dipeptide (CDP) cyclo-(Leu-S-Bzl-Cys) (P1) consisting of L-leucine and S-benzyl protected L-cysteine was reported which formed hydrogel at physiological conditions (at 37^o C and pH=7.46). The hydrogel formed from the cyclic dipeptide P1 showed very good tolerance towards environmental parameters such as pH, temperature and was seen to be stable for more than a year without any deformation. The hydrogel was thermoreversible and stable in the pH range 6-12. Mechanical strength of P1 hydrogel was measured by rheology experiment. AFM and FE-SEM images revealed that in aqueous solvents P1 self-assembled into a highly cross-linked nanofibrillar network which immobilized water molecules inside the cages and formed the hydrogel. The self-assembled cyclic dipeptide acquired antiparallel β-sheet secondary structure which was evident from CD and FT-IR studies. The β-sheet arrangement and formation of amyloid fibrils were further established by ThT binding assay. Furthermore, P1 was able to form hydrogel in presence of anticancer drug 5-fluorouracil (5FU) and sustainable release of the drug from the hydrogel was measured in-vitro. The hydrogelator P1 showed almost no cytotoxicity towards human colorectal cancer cell line HCT116 up to a considerable high concentration and showed potential application in sustainable drug delivery. The co-assembly of 5FU and P1 hydrogel exhibited much better anticancer activity towards HCT116 cancer cell line than 5-fluorouracil alone and decreased the IC₅₀ dose of 5-fluorouracil to a much lower value.

Supramolecular Nanodrugs Based on Covalent Assembly of Therapeutic Peptides toward In Vitro Synergistic Anticancer Therapy

Therapeutic peptides have attracted significant attention in clinical applications due to their advantages in biological origination and good biocompatibility. However, the therapeutic performance of peptides is usually hindered by their short half-lives in blood and inferior activity. Herein, supramolecular nanodrugs of therapeutic peptides are constructed by covalent assembly of chemotherapeutic peptides through genipin cross-linking. The resulting nanodrugs have intense absorbance in the near-infrared region and high photothermal conversion efficiencies, leading to the possibility of photothermal therapy. The combination of photothermal therapy and chemotherapy using the nanodrugs shows synergistic therapeutic effects on cancer cells. Hence, covalent assembly not only maintains the chemotherapeutic activities of the peptides but also triggers supramolecular photothermal effects, demonstrating that the covalent assembly of therapeutic peptides through genipin cross-linking is an efficient approach in constructing supramolecular nanodrugs toward synergistic anticancer therapy.

Cyclic Dipeptide: A Privileged Molecular Scaffold to Derive Structural Diversity and Functional Utility

Cyclic dipeptides (CDPs) are the simplest form of cyclic peptides with a wide range of applications from therapeutics to biomaterials. CDP is a versatile molecular platform endowed with unique properties such as conformational rigidity, intermolecular interactions, structural diversification through chemical synthesis, bioavailability and biocompatibility. A variety of natural products with the CDP core exhibit anticancer, antifungal, antibacterial, and antiviral activities. The inherent bioactivities have inspired the development of synthetic analogues as drug candidates and drug delivery systems. CDP plays a crucial role as conformation and molecular assembly directing core in the design of molecular receptors, peptidomimetics and fabrication of functional material architectures. In recent years, CDP has rapidly become a privileged scaffold for the design of advanced drug candidates, drug delivery agents, bioimaging, and biomaterials to mitigate numerous disease conditions. This review describes the structural diversification and multifarious biomedical applications of the CDP scaffold, discusses challenges, and provides future directions for the emerging field.

Diketopiperazine Gels: New Horizons from the Self-Assembly of Cyclic Dipeptides

Cyclodipeptides (CDPs) or 2,5-diketopiperazines (DKPs) can exert a variety of biological activities and display pronounced resistance against enzymatic hydrolysis as well as a propensity towards self-assembly into gels, relative to the linear-dipeptide counterparts. They have attracted great interest in a variety of fields spanning from functional materials to drug discovery. This concise review will analyze the latest advancements in their synthesis, self-assembly into gels, and their more innovative applications.

Elastin-inspired supramolecular hydrogels: a multifaceted extracellular matrix protein in biomedical engineering

The phenomenal advancement in regenerative medicines has led to the development of bioinspired materials to fabricate a biomimetic artificial extracellular matrix (ECM) to support cellular survival, proliferation, and differentiation. Researchers have diligently developed protein polymers consisting of functional sequences of amino acids evolved in nature. Nowadays, certain repetitive bioinspired polymers are treated as an alternative to synthetic polymers due to their unique properties like biodegradability, easy scale-up, biocompatibility, and non-covalent molecular associations which imparts tunable supramolecular architecture to these materials. In this direction, elastin has been identified as a potential scaffold that renders extensibility and elasticity to the tissues. Elastin-like polypeptides (ELPs) are artificial repetitive polymers that exhibit lower critical solution temperature (LCST) behavior in a particular environment than synthetic polymers and hence have gained extensive interest in the fabrication of stimuli-responsive biomaterials. This review discusses in detail the unique structural aspects of the elastin and its soluble precursor, tropoelastin. Furthermore, the versatility of elastin-like peptides is discussed through numerous examples that bolster the significance of elastin in the field of regenerative medicines such as wound care, cardiac tissue engineering, ocular disorders, bone tissue regeneration, etc. Finally, the review highlights the importance of exploring short elastin-mimetic peptides to recapitulate the structural and functional aspects of elastin for advanced healthcare applications.

Antimicrobial d-Peptide Hydrogels

Biofilms are widely involved in human lives, such as in medical infection, environmental remediation, and industrial processes. However, the control of the biofilm has still been a challenge because of its strong drug resistance. Here, we designed and synthesized an amphipathic antimicrobial peptide (Ac-^DK^DH^DH^DQ^DK^DL^DV^DF^DF^DA^DK-NH₂ (KKd-11)) that was composed of d-amino acids (DAAs). KKd-11 was found to self-assemble into a hydrogel with an improved long-term antimicrobial ability and a better antiprotease activity as compared to the hydrogel formed by Ac-^LK^LH^LH^LQ^LK^LL^LV^LF^LF^LA^LK-NH₂ (KK-11). Our results indicated that KKd-11 was not only able to inhibit the formation of biofilms but also could effectively damage preformed mature biofilms and kill the bacteria within the biofilms. Besides, cell viability assays indicated that the KKd-11 peptide had very good biocompatibility. We think d-peptide hydrogels may have great potential in the treatment of biofilm-induced infections.

Recent advances in the fabrication and bio-medical applications of self-assembled dipeptide nanostructures

Molecular self-assembly is a widespread natural phenomenon and has inspired several researchers to synthesize a compendium of nano/microstructures with widespread applications. Biomolecules like proteins, peptides and lipids are used as building blocks to fabricate various nanomaterials. Supramolecular peptide self-assembly continue to play a significant role in forming diverse nanostructures with numerous biomedical applications; however, dipeptides offer distinctive supremacy in their ability to self-assemble and produce a variety of nanostructures. Though several reviews have articulated the progress in the field of longer peptides or polymers and their self-assembling behavior, there is a paucity of reviews or literature covering the emerging field of dipeptide-based nanostructures. In this review, our goal is to present the recent advancements in dipeptide-based nanostructures with their potential applications.

Self-Assembly of Cyclic Dipeptides: Platforms for Functional Materials

Supramolecular self-assembled functional materials comprised of cyclic dipeptide building blocks have excellent prospects for biotechnology applications due to their exceptional structural rigidity, morphological flexibility, ease of preparation and modification. Although the pharmacological uses of many natural cyclic dipeptides have been studied in detail, relatively little is reported on the engineering of these supramolecular architectures for the fabrication of functional materials. In this review, we discuss the progress in the design, synthesis, and characterization of cyclic dipeptide supramolecular nanomaterials over the past few decades, highlighting applications in biotechnology and optoelectronics engineering.

Pathway-Dependent Preferential Selection and Amplification of Variable Self-Assembled Peptide Nanostructures and Their Biological Activities

We demonstrate the formation of diverse peptide nanostructures, which are "out of equilibrium" based on a single dipeptide gelator. These structures represent the differential energy states of the free energy landscape, which are accessed by differential energy inputs provided by variable self-assembly pathways, that is, heat-cool method or ultrasonication. A higher energy input by the heat-cool method created a thermodynamically favored long entangled nanofibrillar network, while twisted ribbonlike structures were prevalent by ultrasonication. Interestingly, the nanofibrillar network representing the global thermodynamic minima could be accessed by simply melting the kinetically trapped structures as indicated by the thermoreversibility studies. The impact on the material strength was remarkable; gels with an order of magnitude difference in mechanical properties could be fabricated by simply modulating the self-assembly pathways. Interestingly, the thermodynamically favored nanofibrous network promoted cellular adhesion and survival, while a significant number of cells fail to adhere on the kinetically trapped twisted ribbons. Thus, nonequilibrium nanostructures open up new directions to develop advanced functional materials with diverse functions.

Co-solvent polarity tuned thermochromic nanotubes of cyclic dipeptide-polydiacetylene supramolecular system

The cooperative non-covalent interactions arising from structurally integrated multiple molecules have emerged as a powerful tool for the creation of functional supramolecular structures. Herein, we constructed cyclic dipeptide (CDP)–polydiacetylene (PDA) conjugate (CDP–DA) by introducing cyclo(l-Phe-l-Lys) to the linear 10,12-pentacosadiynoic acid. Owing to extensive hydrogen bonding characteristics, together with structural chirality of cyclo(l-Phe-l-Lys) and strong π–π stacking diacetylenic template, CDP–DA generated supramolecular nanotubes. The structural visualization using scanning and transmission electron microscopy revealed chloroform/methanol co-solvent polarity tuned morphological transformation of intrinsic lamellar assemblies into nanotubes comprising single-wall and multi-wall structure. The mechanistic understanding by X-ray diffraction patterns confirms bilayer organization in lamellar structure, which forms nanotubes via a gradual lamellar curling-to-scrolling process. The supramolecular CDP–DA nanotubes are transformed into the rigid covalently cross-linked blue-phase polydiacetylene (CDP–PDA) by UV irradiation. Very interestingly, the blue-phase nanotubes display reversible thermochromic changing temperature up to 150 °C with excellent repeatability over a dozen thermal cycles. This work provides an efficient strategy for precise morphological control and aiding the perspective for development in nanostructures for functional devices.

Co-solvent controlled fabrication of thermo-responsive chromogenic nanotubes of a cyclic dipeptide–polydiacetylene supramolecular system.

Self-assembled injectable biomolecular hydrogels towards phototherapy

Biomolecular hydrogels assembled from biomolecules, such as proteins, peptides, and polysaccharides, are promising candidates for facilitating biomedical applications due to their advantages of high biocompatibility, adjustable mechanical properties, functional diversity, and good degradability. This review focuses on current progress in the field of supramolecular injectable biomolecular hydrogels and their applications in antitumor photodynamic therapy (PDT), photothermal therapy (PTT), combined PDT and PTT, and antibacterial phototherapy with emphasis on biomolecular hydrogelators, injectable behaviors, phototherapeutic functions, and the remaining challenges. We hope that this review can provide useful inspiration for the construction and biological applications of novel photo-functional hydrogels as well as phototherapies.

Short to ultrashort peptide-based hydrogels as a platform for biomedical applications

Short peptides have attracted significant attention from researchers in the past few years due to their easy design, synthesis and characterization, diverse functionalisation possibilities, low cost, possibility to make a large range of hierarchical nanostructures and most importantly their high biocompatibility and biodegradability. Generally, short peptides are also relatively more stable than their longer variants, non-immunogenic in nature and many of them self-assemble to provide an exciting range of nanostructures, including hydrogels. Thus, the development of short peptide-based hydrogels has become an area of intense investigation. Although these hydrogels have a water content of greater than 90%, they are surprisingly highly stable structures, and thus have been used for various biomedical applications, including cell therapeutics, drug delivery, tissue engineering and regeneration, contact lenses, biosensors, and wound healing, by different researchers. Herein, we review the progress of research in the rapidly expanding field of short to ultrashort peptide-based hydrogels and their possible applications. Special attention is paid to address and review this field with regard to the stability of peptide-based hydrogels, particularly to enzymatic degradation.

High-tolerance crystalline hydrogels formed from self-assembling cyclic dipeptide

Peptide-based supramolecular hydrogels, as a new type of biological nanoarchitectonic structure, hold great promise for a wide range of biomedical and nanotechnological applications, such as tissue engineering, drug delivery, and electronic and photonic energy storage. In this work, a cyclic dipeptide (CDP) cyclo-(Trp-Tyr) (C-WY), which has exceptional structural rigidity and high stability, is selected as a hydrogelator for the formation of supramolecular hydrogels. The unique hydrogen bonding in C-WY endows a high propensity for self-assembly and the resulting hydrogels are revealed to be crystalline. The crystalline hydrogels possess excellent mechanical capacity and superior tolerance to various harsh conditions, including in the presence of charged biopolymers, extreme acid/base environments, and changing thermal conditions. Such high tolerance enables the crystalline hydrogels to be applied in the complex and harsh environments of electrochemistry. In addition, this study demonstrates that the self-assembly of cyclic dipeptides results in highly robust hydrogels which can be applied for electrochemical applications such as electrochemical supercapacitors.