Morphology-controlled synthesis of gold nanoparticles with chitosan for catalytic reduction of nitrophenol

Highly Efficient Continuous Flow Nanocatalyst Platform Constructed with Regenerable Bacterial Cellulose Loaded with Gold Nanoparticles and a Nanoporous Membrane

With the development of society and the growing concern about environmental issues, continuous flow catalytic reactors have gained significant interest due to their resource-efficient advantages over traditional batch devices. In this study, we employed a facile one-step in situ reduction approach to construct highly dispersed gold nanoparticles loaded on regenerable bacterial cellulose nanofiber (BCN) heterogeneous catalysts. These catalysts, in combination with a nanoceramic membrane with a pore size of 1 nm, formed a fully mixed system that was favorable for the efficient continuous flow catalysis of selective reduction reactions of nitrophenol. The reaction system demonstrated remarkable catalytic activity toward nitrophenol reduction reactions at low reductant dosages (<5 equiv), achieving over 95% conversion and 99% selectivity for the aniline product in 10 min under room temperature conditions. Furthermore, continuous flow operations maintained stable catalytic activity with minimal catalyst loss after a 120-h test and were 3 times more time-efficient than batch operations. Additionally, continuous monitoring could be conducted through ultraviolet (UV) spectroscopy. A highly efficient and environmentally friendly strategy was present for designing continuous flow reactions in future applications.

Starch Sodium Octenylsuccinate as a New Type of Stabilizer in the Synthesis of Catalytically Active Gold Nanostructures

Here, starch derivatives, i.e., sodium starch octenylsuccinate (OSA starch, hereinafter referred to as OSA), were employed as both reducing and stabilizing agents for the unique, inexpensive, and simple synthesis of gold nanoparticles (OSA-AuNPs) in an aqueous solution with gold salt. The obtained OSA-AuNPs were characterized by UV-vis spectrophotometry, transmission electron microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The catalytic activity of the obtained gold colloids was studied in the reduction of organic dyes, including methylene blue (C.I. Basic Blue 9) and rhodamine B (C.I. Basic Violet 10), and food coloring, including tartrazine (E102) and azorubine (E122), by sodium borohydride. Moreover, OSA-AuNPs were utilized as signal amplifiers in surface-enhanced Raman spectroscopy. The obtained results confirmed that gold nanoparticles can be used as effective catalysts in reduction reactions of selected organic dyes, as well as signal enhancers in the SERS technique.

Circular economical approach of extracting nanocarbons from waste pea peel for sensing of p-nitrophenol and its conversion into paracetamol

An important paradigm shift towards the circular economy is to prioritize waste prevention, reuse, recycling, and recovery before disposal is necessary. In this context, a sustainable protocol of converting waste pea peel (wPP) into low-cost carbon nanomaterials for sensing and conversion of p-nitrophenol (p-NP) into value-added paracetamol is being reported. Two fractions of the carbonaceous nanomaterials were obtained after the hydrothermal treatment (HT) of wPP, firstly an aqueous portion containing water-soluble carbon dots (wPP-CDs) and a solid residue, which was converted into carbonized biochar (wPP-BC). Blue-colored fluorescent wPP-CDs displayed excitation-dependent and pH-independent properties with a quantum yield (QY) of 8.82 %, which were exploited for the fluorescence sensing of p-NP with 4.20 μM limit of detection. Pyrolyzed biochar acting as an efficient catalyst effectively reduces p-NP to p-aminophenol (p-AP) in just 16 min with a 0.237 min-1 rate of conversion. Furthermore, the produced p-AP was converted into paracetamol, an analgesic and antipyretic drug, to achieve zero waste theory. Thus, this study provides the execution of sustainable approaches based on the integral valorization of biowaste that can be further recycled and reused, offering an effective way to attain a profitable circular economy.

Unlocking the potential of Opuntia species mucilage in chemistry

Herein, we describe a detailed protocol to extract the mucilage from different species of the genus Opuntia spp. (i.e., Opuntia Ficus (OFi), Opuntia Dillenii (ODi) and Opuntia Robusta (ORo)). The extracted mucilage was characterized by NMR, FTIR-ATR, HPLC, and TGA. OFi was found to have the highest phenolic content, 7.84 ± 1.93 mg catechol/g mucilage. The mucilage from the three species were characterized by having a high content of monosaccharides, being mannose and glucose the most abundant components (ca. 48-73 % and 23-35 %, respectively). In the context of biomass revalorization, the mucilage was proven to serve as a reducing and stabilizing agent in the synthesis of gold nanoparticles (AuNP/mucilage). The synthesis was optimized with a mucilage concentration of 2 mg/mL using 12.5 μL of KAuCl4 and was carried out at 80 °C for 90 min. This protocol afforded spherical nanoparticles with an average size of 9.7 ± 4.0 nm that were stable for at least 14 days, as demonstrated by TEM. Synthesized AuNP/mucilage was evaluated as a plasmonic catalyst for the reduction of 4-nitrophenol as model reaction, showing a considerable enhancement in its kapp of 97 % under white light and a decrease of 24.8 % in its activation energy.

Synthesis and characterization of chitosan-copper nanocomposites and their catalytic properties for 4-nitrophenol reduction

Biopolymer-based copper nanoparticles (CuNPs) have become an area of significant interest due to their wide-ranging applications in a variety of fields. However, there remains a challenge in tailoring their morphologies and improving their properties. In this study, CuNPs were synthesized via wet chemical reduction using sodium hypophosphite monohydrate (NaH2PO2·H2O), l-ascorbic acid and chitosan. The effect of different synthesis conditions, including reaction pH, temperature, time, concentration of NaH2PO2·H2O, l-ascorbic acid and chitosan, as well as the deacetylation degree (DD) of chitosan, on the synthesis of CuNPs was investigated. The synthesized CuNPs were characterized by various analytical techniques. The catalytic properties of synthesized CuNPs were investigated for the reduction of 4-nitrophenol (4-NP) in the presence of sodium borohydride. The synthesis-morphology-catalytic activity relationship of CuNPs was discussed. The results suggested that the morphology of CuNPs could be adjusted by controlling the synthesis conditions. Chitosan DD significantly impacts the morphology of the synthesized CuNPs. As the chitosan DD decreased from 91.8 % to 52.3 %, the average particle size of synthesized CuNPs decreased from 43.9 ± 10.6 to 17.7 ± 5.9 nm and the shape changed from anisotropy to near-sphere. CuNPs synthesized using low DD (53.2 %) chitosan (CuNPs-N3) demonstrated the highest 4-NP conversion rate of 99.1 % and reaction rate constant of 0.3540 min-1. CuNPs-N3 was thermodynamically and kinetically more feasible than CuNPs synthesized with high DD chitosan. These findings provide important insights for further designing and developing hierarchical nanostructured CuNPs catalysts for broader applications.

Advances in preparation, biomedical, and pharmaceutical applications of chitosan-based gold, silver, and magnetic nanoparticles: A review

During the last decades, the ever-increasing incidence of various diseases, like cancer, has led to a high rate of death worldwide. On the other hand, conventional modalities (such as chemotherapy and radiotherapy) have not indicated enough efficiency in the diagnosis and treatment of diseases. Thus, potential novel approaches should be taken into consideration to pave the way for the suppression of diseases. Among novel approaches, biomaterials, like chitosan nanoparticles (CS NPs, N-acetyl-glucosamine and D-glucosamine), have been approved by the FDA for some efficient pharmaceutical applications. These NPs owing to their physicochemical properties, modification with different molecules, biocompatibility, serum stability, less immune response, suitable pharmacokinetics and pharmacodynamics, etc. have received deep attention among researchers and clinicians. More importantly, the impact of CS polysaccharide in the synthesis, preparation, and delivery of metallic NPs (like gold, silver, and magnetic NPs), and combination of CS with these metallic NPs can further facilitate the diagnosis and treatment of diseases. Metallic NPs possess some features, like converting NIR photon energy into thermal energy and anti-microorganism capability, and can be a potential candidate for the diagnosis and treatment of diseases in combination with CS NPs. These combined NPs would be efficient pharmaceuticals in the future.

Jamil SNA, Choong TSY, Mat Azmi ID, Abdul Romli NA, Abdullah LC, Chiang PC, Li F. Synthesis of Calcium Peroxide Nanoparticles with Starch as a Stabilizer for the Degradation of Organic Dye in an Aqueous Solution

One of the most significant environmental problems in the world is the massive release of dye wastewater from the dyeing industry. Therefore, the treatment of dyes effluents has received significant attention from researchers in recent years. Calcium peroxide (CP) from the group of alkaline earth metal peroxides acts as an oxidizing agent for the degradation of organic dyes in water. It is known that the commercially available CP has a relatively large particle size, which makes the reaction rate for pollution degradation relatively slow. Therefore, in this study, starch, a non-toxic, biodegradable and biocompatible biopolymer, was used as a stabilizer for synthesizing calcium peroxide nanoparticles (Starch@CPnps). The Starch@CPnps were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Brunauer-Emmet-Teller (BET), dynamic light scattering (DLS), thermogravimetric analysis (TGA), energy dispersive X-ray analysis (EDX) and scanning electron microscopy (SEM). The degradation of organic dyes, methylene blue (MB), using Starch@CPnps as a novel oxidant was studied using three different parameters: initial pH of the MB solution, calcium peroxide initial dosage and contact time. The degradation of the MB dye was carried out via a Fenton reaction, and the degradation efficiency of Starch@CPnps was successfully achieved up to 99%. This study shows that the potential application of starch as a stabilizer can reduce the size of the nanoparticles as it prevents the agglomeration of the nanoparticles during synthesis.

Simple turn-off fluorescence sensor for determination of raloxifene using gold nanoparticles stabilized by chitosan hydrogel

It is essential to develop a simple, applicable, and reliable assay to anticancer drug raloxifene (RAF) because of its significant usage and side effect due to entering residue in the environment. Fluorescence sensors developed and widely used because of them high selectivity, fast-response, and highly-sensitivity. The gold nanoparticles using chitosan hydrogel was synthesized and applied as a fluorescence sensor to determine the trace amount of RAF. The characterization methods including DLS, FE-SEM, EDX, XRD, and FT-IR were performed to confirm the synthesized structure. This sensor turned off the fluorescent signals proportional to RAF concentrations at 400 nm. The RAF can be detected in the linear range from 5 × 10^-7 to 5 × 10^-5 M. Limits of detection and quantification were obtained as 34 × 10^-8 and 11 × 10^-7 M as well as the relative standard deviation calculated as 1.63% in RAF measuring. The effective parameters on quenching efficiency were studied by central composite design (CCD) with response surface methodology (RSM). The effective parameters in RAF determination, include analyte concentration, temperature, contact time, and pH, were obtained as 35 μM, 30 °C, 8 min, and pH = 8.5. The sensor was applied to determine the RAF concentrations in biological and environmental samples with satisfactory recoveries between 97.5% and 109%.

Jamil SNA, Li F, Mat Azmi ID, Chiang PC, Choong TSY. Synthesis of Controlled-Release Calcium Peroxide Nanoparticles Coated with Dextran for Removal of Doxycycline from Aqueous System

Nanoscale calcium peroxide (nCP) has turned out to be one of the effective and environmentally friendly approaches for wastewater remediation purposes. The rapid hydrolysis of nCPs and burst oxygen release caused by the high surface-to-volume ratio of nCPs could surpass the appropriate demand for oxygenation and pollutant degradation in the aqueous system. Thus, coated oxidants (COs) have been prepared using polymeric materials to ensure long-term efficacy and slow-release capability. Therefore, the nCPs were first prepared using dextran as a stabilizer to prevent irreversible agglomeration by the chemical precipitation method and had an average mean size of 2.33 ± 0.81 nm. The synthesized nCPs were then coated with dextran to produce dextran-coated nCPs. Their characteristics and effectiveness in doxycycline (DOX) degradation were assessed. The characterization of nCPs and dextran-coated nCPs was performed using X-ray diffractometry (XRD), field emission scanning electron microscopy (FESEM), fourier transform infrared spectroscopy (FTIR), Brunauer, Emmett and Teller analysis (BET), dynamic light scattering (DLS) and thermogravimetric analysis (TGA) techniques. This work suggests that dextran-coated nCPs are beneficial in wastewater treatment practice in terms of the long-term efficacy of DOX degradation potential.

Controlled Release of Tea Tree Oil from a Chitosan Matrix Containing Gold Nanoparticles

Chitosan is a biopolymer that, due to its versatile bioactive properties, has applications in several areas, including food, medicine and pharmaceuticals. In the field of tissue engineering, chitosan can be used, for example, as a dressing to treat wounds or dermal damage, such as burns or abrasions. This work deals with the controlled release of tea tree oil from chitosan-based polymeric films and droplets containing gold nanoparticles (AuNP). AuNPs were successfully incorporated into the chitosan matrix using two different approaches. Both solutions were loaded with tea tree oil, and from these solutions, it was possible to obtain drop-cast films and droplets. The controlled release of oil in water was performed both in the films and in the droplets. The addition of AuNP in the controlled release system of melaleuca oil favored a release time of around 25 h. A series of experiments was carried out to investigate the effects of different reaction temperatures and acetic acid concentrations on the formation of AuNPs in the presence of chitosan. For this purpose, images of the AuNP films and droplets were obtained using transmission electron microscopy. In addition, UV-vis spectra were recorded to investigate the release of tea tree oil from the different samples.

A cellulose nanocrystal templating approach to synthesize size-controlled gold nanoparticles with high catalytic activity

Advanced templating methods have shown precise regulation of the micro/nanostructures of inorganic catalysts. Here, on the basis of controlled self-assembly and micro-structures of cellulose nanocrystals (CNCs), a new bio-mass-mediated templating approach is proposed to control the growth of gold nanoparticles (Au NPs). The catalytic performance of the as-prepared Au NPs was evaluated using p-nitrophenol as a model pollutant. TEM, POM, zeta-potential, and rheological measurements were conducted to investigate the structure and catalytic activity of the nano-materials. By regulating the chiral nematic liquid crystal texture formed by the self-assembly of CNCs, the size of Au NPs could be adjusted at the nanoscale dimension, from 1.38 ± 0.38 nm to 4.25 ± 1.24 nm. Depending on the Au size, a high catalytic effect, namely, 98.0% conversion rate, was obtained within 30 min. The conversion rate was maintained at 97.0% even after 3-run cyclic application. Such findings demonstrate the potential of using CNCs as a bio-template to control the growth of nanomaterials.

Exploring the catalytic activity of Nb4C3Tx MXene towards the degradation of nitro compounds and organic dyes by in situ decoration of palladium nanoparticles

We report on the catalytic activity of Nb4C3Tx based composites towards the catalytic reduction of nitro compounds and organic dyes for the first time.