Solution properties and vesicle formation of rhamnolipid biosurfactants produced by Pseudomonas aeruginosa SP4

The efficiency of micellar solubilization of naphthalene from aqueous solutions using rhamnolipid as a biological surfactant according to NMR diffusometry

The micellar solubilization of naphthalene from its saturated aqueous solutions using the biosurfactant rhamnolipid was studied. Using the NMR diffusion method, selective measurements of the self-diffusion coefficients of molecules of all components of the solution-naphthalene, rhamnolipid, and water-were carried out at various rhamnolipid concentrations from 0.06 to 100 g/L. Based on the results of diffusometry, the distribution of naphthalene molecules between the states free in solution and states bound by micelles was found. With an increase in the concentration of rhamnolipids, the proportion of bound naphthalene molecules increases from 50% at CRL = 2 g/L to 100% at CRL ≥ 50 g/L. The micelle-water partition coefficient Km and the molar solubilization ratio MSR were calculated.

Self-Assembly of Rhamnolipid Bioamphiphiles: Understanding the Structure-Property Relationship Using Small-Angle X-ray Scattering

The structure-property relationship of rhamnolipids, RLs, well-known microbial bioamphiphiles (biosurfactants), is explored in detail by coupling cryogenic transmission electron microscopy (cryo-TEM) and both ex situ and in situ small-angle X-ray scattering (SAXS). The self-assembly of three RLs with reasoned variation of their molecular structure (RhaC10, RhaC10C10, and RhaRhaC10C10) and a rhamnose-free C10C10 fatty acid is studied in water as a function of pH. It is found that RhaC10 and RhaRhaC10C10 form micelles in a broad pH range and RhaC10C10 undergoes a micelle-to-vesicle transition from basic to acid pH occurring at pH 6.5. Modeling coupled to fitting SAXS data allows a good estimation of the hydrophobic core radius (or length), the hydrophilic shell thickness, the aggregation number, and the surface area per RL. The essentially micellar morphology found for RhaC10 and RhaRhaC10C10 and the micelle-to-vesicle transition found for RhaC10C10 are reasonably well explained by employing the packing parameter (PP) model, provided a good estimation of the surface area per RL. On the contrary, the PP model fails to explain the lamellar phase found for the protonated RhaRhaC10C10 at acidic pH. The lamellar phase can only be explained by values of the surface area per RL being counterintuitively small for a di-rhamnose group and folding of the C10C10 chain. These structural features are only possible for a change in the conformation of the di-rhamnose group between the alkaline and acidic pH.

Micellar and solubilizing properties of rhamnolipids

We studied the micellar and solubilizing properties of aqueous solutions of unfractionated rhamnolipids produced by Pseudomonas aeruginosa. We used nuclear magnetic resonance (NMR) diffusometry, dynamic light scattering, and conductometry to measure the critical micelle concentration (CMC) of rhamnolipid solutions and determined the effective hydrodynamic radii of rhamnolipid monomers and micelles. Based on selective measurements of the self-diffusion coefficients of molecules, performed by NMR diffusometry, the solubilizing properties of rhamnolipids were studied depending on their concentration in solution; aromatic hydrocarbons, benzene, toluene, ethylbenzene, and para-xylene were taken as solubilizates. On the basis of the measurement results, we estimated the distribution coefficient of the solubilizate between the micellar (solubilized) and free (in the aqueous phase) states and the solubilizing capacity of rhamnolipid micelles.

Rhamnolipid Self-Aggregation in Aqueous Media: A Long Journey toward the Definition of Structure–Property Relationships

The need to protect human and environmental health and avoid the widespread use of substances obtained from nonrenewable sources is steering research toward the discovery and development of new molecules characterized by high biocompatibility and biodegradability. Due to their very widespread use, a class of substances for which this need is particularly urgent is that of surfactants. In this respect, an attractive and promising alternative to commonly used synthetic surfactants is represented by so-called biosurfactants, amphiphiles naturally derived from microorganisms. One of the best-known families of biosurfactants is that of rhamnolipids, which are glycolipids with a headgroup formed by one or two rhamnose units. Great scientific and technological effort has been devoted to optimization of their production processes, as well as their physicochemical characterization. However, a conclusive structure–function relationship is far from being defined. In this review, we aim to move a step forward in this direction, by presenting a comprehensive and unified discussion of physicochemical properties of rhamnolipids as a function of solution conditions and rhamnolipid structure. We also discuss still unresolved issues that deserve further investigation in the future, to allow the replacement of conventional surfactants with rhamnolipids.

Biomolecules from Serratia sp. CS1 indigenous to Ethiopian natural alkaline lakes: biosurfactant characteristics and assessment of compatibility in a laundry detergent

In this study, the biosurfactants (Bio-SFs) producing bacteria are screened from the selected alkaline lake of Ethiopia, and the potential bacterial strain and their produced Bio-SFs are further characterized. In an initial screening, 25 bacterial isolates were isolated, and among those, the bacterial isolate assigned as CS1 was identified as the most potent producer of Bio-SFs using a subsequent characterization process. The CS1 strain was identified as Serratia sp. via biochemical and molecular methods. An emulsion index (E₂₄) of 69.06 ± 0.11% was obtained for CS1 after 5 days of incubation time at 30 °C. The CS1-extracted Bio-SFs were characterized by Fourier transform infrared (FTIR), and it indicated that the type of biosurfactant produced was a glycolipid. The stability of the crude Bio-SFs was characterized, and the optimal conditions were found to be 80 °C, pH 8, and 3% NaCl, respectively. The extracted Bio-SFs were compatible with tested commercial detergents, and its efficiency increased from 12.2 ± 0.1% to 67.1 ± 0.17% and 70.43 ± 0.11% when combined with commercially available detergent brands in Ethiopia such as Taza and Largo, respectively. This study suggests that the isolated S. marcescens CS1 strain has the potential to produce Bio-SFs that are viable competence to replace the use of synthetic chemicals in the production of commercial detergents.

Rhamnolipid Micellization and Adsorption Properties

Biosurfactants are naturally occurring amphiphiles that are being actively pursued as alternatives to synthetic surfactants in cleaning, personal care, and cosmetic products. On the basis of their ability to mobilize and disperse hydrocarbons, biosurfactants are also involved in the bioremediation of oil spills. Rhamnolipids are low molecular weight glycolipid biosurfactants that consist of a mono- or di-rhamnose head group and a hydrocarbon fatty acid chain. We examine here the micellization of purified mono-rhamnolipids and di-rhamnolipids in aqueous solutions and their adsorption on model solid surfaces. Rhamnolipid micellization in water is endothermic; the CMC (critical micellization concentration) of di-rhamnolipid is lower than that of mono-rhamnolipid, and both CMCs decrease upon NaCl addition. Rhamnolipid adsorption on gold surface is mostly reversible and the adsorbed layer is rigid. A better understanding of biosurfactant self-assembly and adsorption properties is important for their utilization in consumer products and environmental applications.

Improved remediation of co-contaminated soils by heavy metals and PAHs with biosurfactant-enhanced soil washing

Due to the huge toxicity of co-contaminated soil with PAHs and heavy metals and the complexity of their remediation, it is thus critical to take effective remediation actions to remove heavy metals and PAHs simultaneously from the co-contaminated soil. Biosurfactant-enhanced soil washing (BESW) were investigated in this study for remediation of soil co-contaminated with phenanthrene (PHE) and cadmium (Cd). The co-existence of PHE and Cd caused the change of the structure of soil and rhamnolipid micelle, which lead to different removal rate of PHE and Cd from co-contaminated soil compared with single contaminated soil. The results of FT-IR and NMR showed that PHE entered micelles of rhamnolipid and Cd formed the complexation with the external carboxyl groups of rhamnolipid micelle. We also found that pH, concentration of rhamnolipid solution, temperature and ionic strength had influence on co-contaminated soil remediation. The effects of above mentioned four factors on co-contaminated soil remediation in BESW processes were analyzed by using Taguchi design of experiment method. Taguchi based Grey Relational Analysis was conducted to identify the optimal remediation conditions, which included pH = 9, concentration of rhamnolipid = 5 g/L, temperature = 15 °C and ionic strength = 0.01 M. Under the optimal conditions for BESW, removal rates of cadmium and phenanthrene reached 72.4% and 87.8%, respectively in co-contaminated soil.

Rhamnolipid-Based Liposomes as Promising Nano-Carriers for Enhancing the Antibacterial Activity of Peptides Derived from Bacterial Toxin-Antitoxin Systems

Background

Antimicrobial resistance poses substantial risks to human health. Thus, there is an urgent need for novel antimicrobial agents, including alternative compounds, such as peptides derived from bacterial toxin-antitoxin (TA) systems. ParELC3 is a synthetic peptide derived from the ParE toxin reported to be a good inhibitor of bacterial topoisomerases and is therefore a potential antibacterial agent. However, ParELC3 is inactive against bacteria due to its inability to cross the bacterial membranes. To circumvent this limitation we prepared and used rhamnolipid-based liposomes to carry and facilitate the passage of ParELC3 through the bacterial membrane to reach its intracellular target - the topoisomerases.

Methods and Results

Small unilamellar liposome vesicles were prepared by sonication from three formulations that included 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine and cholesterol. ParELC3 was loaded with high efficiency into the liposomes. Characterization by DLS and TEM revealed the appropriate size, zeta potential, polydispersity index, and morphology. In vitro microbiological experiments showed that ParELC3 loaded-liposomes are more efficient (29 to 11 µmol·L⁻¹) compared to the free peptide (>100 µmol·L⁻¹) at inhibiting the growth of standard E. coli and S. aureus strains. RL liposomes showed high hemolytic activity but when prepared with POPC and Chol this activity had a significant reduction. Independently of the formulation, the vesicles had no detectable cytotoxicity to HepG2 cells, even at the highest concentrations tested (1.3 mmol·L⁻¹ and 50 µmol·L⁻¹ for rhamnolipid and ParELC3, respectively).

Conclusion

The present findings suggest the potential use of rhamnolipid-based liposomes as nanocarrier systems to enhance the bioactivity of peptides.

Synergistic Solubilization of Phenanthrene by Mixed Micelles Composed of Biosurfactants and a Conventional Non-Ionic Surfactant

This study investigated the solubilization capabilities of rhamnolipids biosurfactant and synthetic surfactant mixtures for the application of a mixed surfactant in surfactant-enhanced remediation. The mass ratios between Triton X-100 and rhamnolipids were set at 1:0, 9:1, 3:1, 1:1, 1:3, and 0:1. The ideal critical micelle concentration values of the Triton X-100/rhamnolipids mixture system were higher than that of the theoretical predicted value suggesting the existence of interactions between the two surfactants. Solubilization capabilities were quantified in term of weight solubilization ratio and micellar-water partition coefficient. The highest value of the weight solubilization ratio was detected in the treatment where only Triton X-100 was used. This ratio decreased with the increase in the mass of rhamnolipids in the mixed surfactant systems. The parameters of the interaction between surfactants and the micellar mole fraction in the mixed system have been determined. The factors that influence phenanthrene solubilization, such as pH, ionic strength, and acetic acid concentration have been discussed in the paper. The aqueous solubility of phenanthrene increased linearly with the total surfactant concentration in all treatments. The mixed rhamnolipids and synthetic surfactants showed synergistic behavior and enhanced the solubilization capabilities of the mixture, which would extend the rhamnolipids application.

Recent progress and trends in the analysis and identification of rhamnolipids

Rhamnolipids have extensive potential applications and are the most promising biosurfactants for commercialization. The efficient and accurate identification and analysis of these are important to their production, application and commercialization. Accordingly, significant efforts have been made to identify and analyse rhamnolipids during screening of producing strains, fermentation and application processes. Cationic cetyltrimethylammonium bromide-methylene blue (CTAB-MB) test combines a series of indirect assays to efficiently assist in the primary screening of rhamnolipids-producing strains, while the secretion of rhamnolipids by these strains can be identified through TLC, FTIR, NMR, electrospray ionization mass spectrometry (ESI-MS) and HPLC-MS analysis. Rhamnolipids can be quantified by colorimetric methods requiring the use of concentrated acid, and this approach has the advantages of reliability, simplicity, low-cost and excellent reproducibility with very low technological requirements. HPLC-MS can also be employed as required as a more accurate quantification method. In addition, HPLC-ELSD has been established as the internationally acceptable measure of rhamnolipids for commercial purposes. The preparation of well-accepted rhamnolipids standards and modifications of analysis operations are essential to further enhance the accuracy and improve the simplicity of rhamnolipid analysis.Key points• Current status of R&D works on determination of rhamnolipids is listed• Advantages and disadvantages of various types analysis are summarized• Limitations of current rhamnolipid quantification are discussed Graphical abstract.

Biosurfactants, natural alternatives to synthetic surfactants: Physicochemical properties and applications

Biosurfactants comprise a wide array of amphiphilic molecules synthesized by plants, animals, and microbes. The synthesis route dictates their molecular characteristics, leading to broad structural diversity and ensuing functional properties. We focus here on low molecular weight (LMW) and high molecular weight (HMW) biosurfactants of microbial origin. These are environmentally safe and biodegradable, making them attractive candidates for applications spanning cosmetics to oil recovery. Biosurfactants spontaneously adsorb at various interfaces and self-assemble in aqueous solution, resulting in useful physicochemical properties such as decreased surface and interfacial tension, low critical micellization concentrations (CMCs), and ability to solubilize hydrophobic compounds. This review highlights the relationships between biosurfactant molecular composition, structure, and their interfacial behavior. It also describes how environmental factors such as temperature, pH, and ionic strength can impact physicochemical properties and self-assembly behavior of biosurfactant-containing solutions and dispersions. Comparison between biosurfactants and their synthetic counterparts are drawn to illustrate differences in their structure-property relationships and potential benefits. Knowledge of biosurfactant properties organized along these lines is useful for those seeking to formulate so-called green or natural products with novel and useful properties.

Maximisation of oil recovery from an oil-water separator sludge: Influence of type, concentration, and application ratio of surfactants

Worldwide the generation of oil sludges is approximately 160 million metric tonnes per annum. The washing of oil sludge with surfactant solutions can be used to recover the oil and reused as a feedstock for fuel production. There is a need to establish the influence of the surfactant type, concentration, and application (surfactant to oil sludge, S/OS) ratio to oil sludge for the maximisation of oil recovery. This study presented the oil recovery rates from the washing of an oil-water separator sludge using surfactants, Triton X-100, sodium dodecyl sulphate (SDS), Tween 80, rhamnolipid, and Triton X-114. The surfactants were characterised by critical micelle concentration (CMC), micelle size, and surface activity. A Taguchi experimental design was applied to reduce the number of experimental runs. In general, Triton X-100 and X-114, and rhamnolipid had higher micelle sizes and surfactant activities which resulted in higher oil recoveries. The key role of the surfactants in the washing was evidenced because the ORR values with the surfactants were significantly higher than the value with the control with no surfactant solution. The S/OS ratio was the factor with the largest effect on the Taguchi signal-to-noise ratio (an indicator of variation) of the oil recovery rate. The levels with the maximum recovery rate were 1:1 S/OS, 2CMC of surfactant concentration and Triton X-100 (32% ± 5), Triton X-114 (30% ± 7), and rhamnolipid (29% ± 8). In conclusion, less surfactant solution (1:1 S/OS) and low surfactant concentration (≤2CMC) provided the maximum oil recovery from this type of oil sludge. To our knowledge, no previous study with surfactants has reported low oil recovery values at high S/OS ratios in the oil sludge washing.

Investigation of the structural, physicochemical properties, and aggregation behavior of lipopeptide biosurfactant produced by Acinetobacter junii B6

In the present study the produced biosurfactant of Acinetobacter junii B6 (recently isolated from Iranian oil excavation site) were partially purified and identified by high performance thin layer chromatography (HPTLC), Fourier transform infrared spectroscopy (FTIR), and proton nuclear magnetic resonance (¹H NMR). Elemental analysis of the biosurfactant by energy dispersive X-ray spectroscopy (EDS) revealed that the biosurfactant was anionic in nature. The physiochemical properties of the lipopeptide biosurfactant were evaluated by determination of its critical micelle concentration (CMC) and hydrophile-lipophile balance (HLB). The produced biosurfactant decreased the surface tension of water to 36mNm^-1 with the CMC of approximately 300mg/l. Furthermore, the solubility properties of the biosurfactant (dissolved in phosphate-buffer saline solution, pH7.4) were investigated by turbidity examination, dynamic light scattering (DLS) measurements, and transmission electron microscopy (TEM) inspection. It could be concluded that the biosurfactant showed the spherical-shaped vesicles at a concentration higher than its CMC and the circular dichroism (CD) spectra showed that the secondary structure of the biosurfactant vesicles is dominated by the β sheet.

In situ surface transfer process of Cry1Ac protein on SiO2： The effect of biosurfactants for desorption

Genetically modified Bacillus thuringiensis (Bt) crops, which have been widely used in agricultural transgenic plants, express insecticidal Cry proteins and release the toxin into soils. Taking into consideration the environmental risk of Cry proteins, biosurfactant-rhamnolipids were applied to desorb Cry proteins from soil environment, which has not been elucidated before. Quartz crystal microbalance with dissipation (QCM-D) was used in this article to investigate the adsorption and desorption behaviors of Cry1Ac on SiO₂ surface (model soil). Results showed that patch-controlled electrostatic attraction (PCEA) governed Cry1Ac adsorption to SiO_2, and the solution pH or ionic strength can affect PCEA. The adsorption kinetics could be fitted by the pseudo-second-order model, and the adsorption isotherm was fitted to Langmuir model with correlation coefficients higher than 0.999. The desorption characteristics of Cry1Ac from SiO₂ were assessed in the presence of mono-rhamnolipid, di-rhamnolipid or complex-rhamnolipid. Mono-rhamnolipid exhibited the most significant positive effect on desorption performance. With a complete removal of Cry1Ac reached when mono-rhamnolipid concentration was up to 50mgL^-1. Additionally, the desorption was enhanced at alkaline pH range, and Cry1Ac can be completely and rapidly desorbed by rhamnolipids from SiO₂ at ionic strength of 5×10^-2M.

Adsorption at the Air-Water Interface in Biosurfactant-Surfactant Mixtures: Quantitative Analysis of Adsorption in a Five-Component Mixture

The composition of the air-water adsorbed layer of a quinary mixture consisting of three conventional surfactants, octaethylene glycol monododecyl ether (C₁₂E₈), dodecane-6-p-sodium benzene sulfonate (LAS6), and diethylene glycol monododecyl ether sodium sulfate (SLE₂S), mixed with two biosurfactants, the rhamnolipids l-rhamnosyl-l-rhamnosyl-β-hydroxydecanoyl-β-hydroxydecanoyl, R2, and l-rhamnosyl-β-hydroxydecanoyl-β-hydroxydecanoyl, R1, has been measured over a range of compositions above the mixed critical micelle concentration. Additional measurements on some of the subsets of ternary and binary mixtures have also been measured by NR. The results have been analyzed using the pseudophase approximation (PPA) in conjunction with an excess free energy, G_E, that depends on the quadratic and cubic terms in the composition. The compositions of the binary, ternary, and quinary mixtures could all be fitted to two sets of interaction parameters between the pairs of surfactants, one for micelles and one for adsorption. No ternary interactions or ternary corrections were required. Because the system contains two strongly anionic surfactants, the PPA can be extended, in practice, to ionic surfactants, contrary to the prevailing view. The values of the interaction parameters show that the quinary mixture, SLE₂S-LAS6-C₁₂E₈-R1-R2, which is known to be a highly effective surfactant system, is characterized by a sequence of strong surface but weak micellar interactions. About half of the minima in G_E for the strong surface interactions occur well away from the regular solution value of 0.5.

Disruption of Staphylococcus aureus biofilms using rhamnolipid biosurfactants

Staphylococcus aureus is an important pathogen that has shown ability to establish biofilm communities that can represent a source of contamination and resistance in food processing. Rhamnolipids (RL) have attracted attention as candidates to replace synthetic surfactants, exhibiting high surface activity combined with its microbial origin, biodegradability, and low toxicity. In this work, an RL biosurfactant was evaluated regarding its ability to disrupt or remove S. aureus biofilms established on polystyrene plates using nutrient broth and skim milk as the growth media. Rhamnolipid treatment was performed at different surfactant concentrations and temperatures. Rhamnolipid removes up to 88.9% of milk-based biofilms, whereas for nutrient medium 35% removal was attained. The RL concentration affects the disruption of nutrient medium-based biofilms. High carbohydrate content of milk-based biofilms favors disruption by RL and the organization of RL molecules in solution showed a predominance of aggregates from 1 to 10 and 100 to 1,000 nm in all conditions studied. Biofilm disruption activity of RL is nutrient-specific and dependent on biofilm matrix composition. Staphylococcus aureus biofilms established in milk were significantly reduced using RL at low concentrations and temperatures. These findings suggest potential application of RL in milk (dairy) processing industries where low temperatures are applied.

Evolution of Aggregate Structure in Solutions of Anionic Monorhamnolipids: Experimental and Computational Results

The evolution of solution aggregates of the anionic form of the native monorhamnolipid (mRL) mixture produced by Pseudomonas aeruginosa ATCC 9027 is explored at pH 8.0 using both experimental and computational approaches. Experiments utilizing surface tension measurements, dynamic light scattering, and both steady-state and time-resolved fluorescence spectroscopy reveal solution aggregation properties. All-atom molecular dynamics simulations on self-assemblies of the most abundant monorhamnolipid molecule, l-rhamnosyl-β-hydroxydecanoyl-β-hydroxydecanoate (Rha-C10-C10), in its anionic state explore the formation of aggregates and the role of hydrogen bonding, substantiating the experimental results. At pH 8.0, at concentrations above the critical aggregation concentration of 201 μM but below ∼7.5 mM, small premicelles exist in solution; above ∼7.5 mM, micelles with hydrodynamic radii of ∼2.5 nm dominate, although two discrete populations of larger lamellar aggregates (hydrodynamic radii of ∼10 and 90 nm) are also present in solution in much smaller number densities. The critical aggregation number for the micelles is determined to be ∼26 monomers/micelle using fluorescence quenching measurements, with micelles gradually increasing in size with monorhamnolipid concentration. Molecular dynamics simulations on systems with between 10 and 100 molecules of Rha-C10-C10 indicate the presence of stable premicelles of seven monomers with the most prevalent micelle being ∼25 monomers and relatively spherical. A range of slightly larger micelles of comparable stability can also exist that become increasing elliptical with increasing monomer number. Intermolecular hydrogen bonding is shown to play a significant role in stabilization of these aggregates. In total, the computational results are in excellent agreement with the experimental results.

Rhamnolipid-aided biodegradation of carbendazim by Rhodococcus sp. D-1: Characteristics, products, and phytotoxicity

We successfully isolated Rhodococcus sp. D-1, an efficient carbendazim-degrading bacterium that degraded 98.20% carbendazim (200ppm) within 5days. Carbendazim was first processed into 2-aminobenzimidazole, converted to 2-hydroxybenzimidazole, and then further mineralized by subsequent processing. After genomic analysis, we hypothesized that D-1 may express a new kind of enzyme capable of hydrolyzing carbendazim. In addition, the effect of the biodegradable biosurfactant rhamnolipid on the rate and extent of carbendazim degradation was assessed in batch analyses. Notably, rhamnolipid affected carbendazim biodegradation in a concentration-dependent manner with maximum biodegradation efficiency at 50ppm (at the critical micelle concentration, CMC) (97.33% degradation within 2days), whereas 150ppm (3 CMC) rhamnolipid inhibited initial degradation (0.01%, 99.26% degradation within 2 and 5days, respectively). Both carbendazim emulsification and favorable changes in cell surface characteristics likely facilitated its direct uptake and subsequent biodegradation. Moreover, rhamnolipid facilitated carbendazim detoxification. Collectively, these results offer preliminary guidelines for the biological removal of carbendazim from the environment.

Adsorption and Aggregation Activity of Sodium Dodecyl Sulfate and Rhamnolipid Mixture

Measurements of the surface tension, density and viscosity of sodium dodecyl sulfate (SDS) and rhamnolipid (RL) mixtures were carried out in aqueous solution. From the obtained results, composition of mixed surface layer at the water–air interface, mixed micelles, parameter of intermolecular interactions, activity of SDS and RL in the surface layer and micelles, Gibbs standard free energy of adsorption and micellization as well as Gibbs free energy of SDS and RL mixing in the surface layer and micelles were established. These parameters were discussed in the light of independent adsorption of SDS and RL and the size of their molecules as well as the area in contact with water molecules. A correlation between the number of water molecules in contact with those of SDS and RL and standard free energy of adsorption as well as micellization of these surfactants was observed. A correlation between the apparent and partial molar volumes of RL and SDS in their mixture and size of surfactant molecules as well as the average distance between molecules was also found. The parameter of intermolecular interactions indicates that there is a synergetic effect in the reduction of water surface tension and micelle formation.

Rhamnolipid CMC prediction

Relationships between the purity, pH, hydrophobicity (logK_ow) of the carbon substrate, and the critical micelle concentration (CMC) of rhamnolipid type biosurfactants (RL) were investigated using a quantitative structure-property relationship (QSPR) approach and are presented here for the first time. Measured and literature CMC values of 97 RLs, representing biosurfactants at different stages of purification, were considered. An arbitrary scale for RLs purity was proposed and used in the modelling. A modified evolutionary algorithm was used to create clusters of equations to optimally describe the relationship between CMC and logK_ow, pH and purity (the optimal equation had an R² of 0.8366). It was found that hydrophobicity of the carbon substrate used for the biosynthesis of the RL had the most significant influence on the final CMC of the RL. Purity of the RLs was also found to have a significant impact, where generally the less pure the RL the higher the CMC. These results were in accordance with our experimental data. Therefore, our model equation may be used for controlling the biosynthesis of biosurfactants with properties targeted for specific applications.

Solubilization of Polycyclic Aromatic Hydrocarbons by Single and Binary Mixed Rhamnolipid-Sophorolipid Biosurfactants

Biosurfactants are promising additives for surfactant enhanced remediation (SER) technologies due to their low toxicity and high biodegradability. To develop green and efficient additives for SER, the aqueous solubility enhancements of polycyclic aromatic hydrocarbons (PAHs; naphthalene, phenanthrene, and pyrene) by rhamnolipid (RL) and sophorolipid (SL) biosurfactants were investigated in single and binary mixed systems. The solubilization capacities were quantified in terms of the solubility enhancement factor, molar solubilization ratio (MSR), and micelle-water partition coefficient (). Rughbin's model was applied to evaluate the interaction parameters (β) in the mixed RL-SL micelles. The solubility of the PAHs increased linearly with the glycolipid concentration above the critical micelle concentration (CMC) in both single and mixed systems. Binary RL-SL mixtures exhibited greater solubilization than individual glycolipids. At a SL molar fraction of 0.7 to 0.8, the solubilization capacity was the greatest, and the MSR and reached their maximum values, and β values became positive. These results suggest that the two biosurfactants act synergistically to increase the solubility of the PAHs. The solubilization capacity of the RL-SL mixtures increased with increasing temperature and decreased with increasing salinity. The aqueous solubility of phenanthrene reached a maximum value at pH of 5.5. Moreover, the mixed RL-SL systems exhibited a strong ability to solubilize PAHs, even in the presence of heavy metal ions. These mixed biosurfactant systems have the potential to improve the performance of SER technologies using biosurfactants to solubilize hydrophobic organic contaminants by decreasing the applied biosurfactant concentration, which reduces the costs of remediation.

Utilization of Paneer Whey Waste for Cost-Effective Production of Rhamnolipid Biosurfactant

The present study aimed at isolating rhamnolipid biosurfactant-producing bacteria that could utilize paneer whey, an abundant waste source as sole medium for the production purpose. Pseudomonas aeruginosa strain, SR17, was isolated from hydrocarbon-contaminated soil that could efficiently utilize paneer whey for rhamnolipid production and reduce surface tension of the medium from 52 to 26.5 mN/m. The yield of biosurfactant obtained was 2.7 g/l, upgraded to 4.8 g/l when supplemented with 2 % glucose and mineral salts. Biochemical, FTIR, and LC-MS analysis revealed that extracted biosurfactant is a combination of both mono and di-rhamnolipid congeners. The critical micelle concentration (CMC) was measured to be 110 mg/l. Emulsification activity of the biosurfactant against n-hexadecane, olive oil, kerosene, diesel oil, engine oil, and crude oil were found to be 83, 88, 81, 92, 86, and 100 %, respectively. The rhamnolipid was detected to be non-toxic against mouse fibroblastic cell line L292.

Diverse effects of a biosurfactant from Rhodococcus ruber IEGM 231 on the adhesion of resting and growing bacteria to polystyrene

This study evaluated the effects of a trehalolipid biosurfactant produced by Rhodococcus ruber IEGM 231 on the bacterial adhesion and biofilm formation on the surface of polystyrene microplates. The adhesion of Gram-positive (Arthrobacter simplex, Bacillus subtilis, Brevibacterium linens, Corynebacterium glutamicum, Micrococcus luteus) and Gram-negative (Escherichia coli, Pseudomonas fluorescencens) bacteria correlated differently with the cell hydrophobicity and surface charge. In particular, exponentially growing bacterial cells with increased hydrophobicities adhered stronger to polystyrene compared to more hydrophilic stationary phase cells. Also, a moderate correlation (0.56) was found between zeta potential and adhesion values of actively growing bacteria, suggesting that less negatively charged cells adhered stronger to polystyrene. Efficient biosurfactant concentrations (10-100 mg/L) were determined, which selectively inhibited (up to 76 %) the adhesion of tested bacterial cultures, however without inhibiting their growth. The biosurfactant was more active against growing bacteria rather than resting cells, thus showing high biofilm-preventing properties. Contact angle measurements revealed more hydrophilic surface of the biosurfactant-covered polystyrene compared to bare polystyrene, which allowed less adhesion of hydrophobic bacteria. Furthermore, surface free-energy calculations showed a decrease in the Wan der Waals (γ(LW)) component and an increase in the acid-based (γ(AB)) component caused by the biosurfactant coating of polysterene. However, our results suggested that the biosurfactant inhibited the adhesion of bacteria independently on their surface charges. AFM scanning revealed three-type biosurfactant structures (micelles, cord-like assemblies and large vesicles) formed on glass, depending on concentrations used, that could lead to diverse anti-adhesive effects against different bacterial species.

Aggregation of low-concentration dirhamnolipid biosurfactant in electrolyte solution

Cryo-transmission electron microscopy tests show aggregate formation for dirhamnolipid biosurfactant at concentrations lower than surface-tension-based critical micelle concentration (CMC_st).

Rhamnolipids Production by a Pseudomonas eruginosa LBI Mutant: Solutions and Homologs Characterization

This paper evaluates the effect of additives (NaCl and ethanol) on the solution properties of rhamnolipids. The properties are the surface activity, aggregate formations and emulsifying activity as well as the synergistic effects of additives and pH variations on the physical properties of rhamnolipids. Additionally, analysis of fatty acids and rhamnolipid homologues produced using different carbon sources was performed by mass spectrometry. The results indicate that this biosurfactant maintain its properties in the presence of additives. NaCl decreases the size and number of aggregates formed in solutions without pH control, while ethanol to rhamnolipid solutions reduces critical micelle concentration and favors aggregation of monomers. The profiles of fatty acids produced by P. aeruginosa LBI 2A1 varied according to the carbon source used, however for rhamnolipids there was no difference.

A PM-IRRAS investigation of monorhamnolipid orientation at the air-water interface

The rhamnolipid biosurfactants have been considered as possible "green" alternatives to synthetic surfactants due to their greater compatibility with the environment and excellent surface active properties. In order to understand the molecular orientation of rhamnolipids at the air-water interface, a new monorhamnolipid with two octadecyl chains, Rha-C18-C18, has been studied at the air-water interface with polarization modulated-infrared reflection absorption spectroscopy (PM-IRRAS). Since rhamnolipids possess a carboxylic acid, and hence exhibit pH-dependent properties, their water surface orientation is studied in solutions of pH 2, 5, and 8. Rhamnolipids have also been reported to form strong complexes with Pb(2+); thus, the effect of the presence of Pb(2+) on molecular orientation at the interface is also investigated. PM-IRRA spectra indicate an increase in alkyl chain order and a decrease in alkyl chain tilt angle as the surface pressure of the monolayer increases, with pH-independent tilt angles ranging from 63° to 45°. Molecular modeling using Spartan provides insight into the cause of this large tilt angle as being due to the nature of the monorhamnolipid packing at the air-water interface as dictated by its large hydrophilic headgroup.