Self-assembled polypeptide-block-poly(vinylpyrrolidone) as prospective drug-delivery systems

Efficient Strategy to Synthesize Tunable pH-Responsive Hybrid Micelles Based on Iron Oxide and Gold Nanoparticles

The preparation of multifunctional nanomaterials based on inorganic nanoparticles with organic materials has emerged as a promising strategy for the development of new nanomedicines for in vitro and in vivo biomedical applications. Here, we synthesized pH-responsive hybrid inorganic micelles by combining a novel pH-responsive amphiphilic molecule with hydrophobic payloads. This amphiphile was synthesized in a one-pot reaction and self-assembled readily into micelles under acidic pH conditions. In the presence of hydrophobic NP payloads such as AuNPs or IONPs, the amphiphile self-organized around them through hydrophobic interactions, resulting in the formation of colloidally stable hybrid micelles. The size of the hydrophobic NPs determined the pH-response of the inorganic hybrid micelles, which is tuned from pH 7 to 11 for our pH-responsive amphiphilic molecule. This achievement represents a novel approach for the synthesis of tunable pH-responsive hybrid micelles based on inorganic NPs for biomedical imaging, hyperthermia treatment, and also drug delivery nanosystems.

Synthesis, Self-Assembly and In Vitro Cellular Uptake Kinetics of Nanosized Drug Carriers Based on Aggregates of Amphiphilic Oligomers of N-Vinyl-2-pyrrolidone

Development of nanocarrier-based drug delivery systems is a major breakthrough in pharmacology, promising targeted delivery and reduction in drug toxicity. On the cellular level, encapsulation of a drug substantially affects the endocytic processes due to nanocarrier–membrane interaction. In this study we synthesized and characterized nanocarriers assembled from amphiphilic oligomers of N-vinyl-2-pyrrolidone with a terminal thiooctadecyl group (PVP-OD). It was found that the dissolution free energy of PVP-OD depends linearly on the molecular mass of its hydrophilic part up to M¯n = 2 × 10⁴, leading to an exponential dependence of critical aggregation concentration (CAC) on the molar mass. A model hydrophobic compound (DiI dye) was loaded into the nanocarriers and exhibited slow release into the aqueous phase on a scale of 18 h. Cellular uptake of the loaded nanocarriers and that of free DiI were compared in vitro using glioblastoma (U87) and fibroblast (CRL2429) cells. While the uptake of both DiI/PVP-OD nanocarriers and free DiI was inhibited by dynasore, indicating a dynamin-dependent endocytic pathway as a major mechanism, a decrease in the uptake rate of free DiI was observed in the presence of wortmannin. This suggests that while macropinocytosis plays a role in the uptake of low-molecular components, this pathway might be circumvented by incorporation of DiI into nanocarriers.

Intravenous Delivery of Lung-Targeted Nanofibers for Pulmonary Hypertension in Mice

Pulmonary hypertension is a highly morbid disease with no cure. Available treatments are limited by systemic adverse effects due to non-specific biodistribution. Self-assembled peptide amphiphile (PA) nanofibers are biocompatible nanomaterials that can be modified to recognize specific biological markers to provide targeted drug delivery and reduce off-target toxicity. Here, PA nanofibers that target the angiotensin I-converting enzyme and the receptor for advanced glycation end-products (RAGE) are developed, as both proteins are overexpressed in the lung with pulmonary hypertension. It is demonstrated that intravenous delivery of RAGE-targeted nanofibers containing the targeting epitope LVFFAED (LVFF) significantly accumulated within the lung in a chronic hypoxia-induced pulmonary hypertension mouse model. Using 3D light sheet fluorescence microscopy, it is shown that LVFF nanofiber localization is specific to the diseased pulmonary tissue with immunofluorescence analysis demonstrating colocalization of the targeted nanofiber to RAGE in the hypoxic lung. Furthermore, biodistribution studies show that significantly more LVFF nanofibers localized to the lung compared to major off-target organs. Targeted nanofibers are retained within the pulmonary tissue for 24 h after injection. Collectively, these data demonstrate the potential of a RAGE-targeted nanomaterial as a drug delivery platform to treat pulmonary hypertension.

Protein Hydrogels: The Swiss Army Knife for Enhanced Mechanical and Bioactive Properties of Biomaterials

Biomaterials are dynamic tools with many applications: from the primitive use of bone and wood in the replacement of lost limbs and body parts, to the refined involvement of smart and responsive biomaterials in modern medicine and biomedical sciences. Hydrogels constitute a subtype of biomaterials built from water-swollen polymer networks. Their large water content and soft mechanical properties are highly similar to most biological tissues, making them ideal for tissue engineering and biomedical applications. The mechanical properties of hydrogels and their modulation have attracted a lot of attention from the field of mechanobiology. Protein-based hydrogels are becoming increasingly attractive due to their endless design options and array of functionalities, as well as their responsiveness to stimuli. Furthermore, just like the extracellular matrix, they are inherently viscoelastic in part due to mechanical unfolding/refolding transitions of folded protein domains. This review summarizes different natural and engineered protein hydrogels focusing on different strategies followed to modulate their mechanical properties. Applications of mechanically tunable protein-based hydrogels in drug delivery, tissue engineering and mechanobiology are discussed.

Enzymatic multifunctional biodegradable polymers for pH- and ROS-responsive anticancer drug delivery

A new family of multifunctional biodegradable block copolymers, PEG-poly(ω-pentadecalactone-co-N-methyldiethyleneamine sebacate-co-2,2'-thiodiethylene sebacate) (PEG-PMT), were synthesized via lipase-catalyzed copolymerization procedures. Amphiphilic PEG-PMT copolymers can be readily transformed into stable micellar nanoparticles through self-assembling processes in aqueous medium. The particle sizes increase dramatically after exposure of the particles to the acidic pH and high reactive oxygen species (ROS) conditions in tumor microenvironments, due to protonation of thioether groups and oxidation of amino groups in the PMT micelle cores, respectively. For example, docetaxel (DTX)-loaded PEG-PM-19 % TS micelles were triggered synergistically by acidic pH and ROS stimuli to release over 85 % of the anti-cancer drug. In particular, DTX/PEG-PMT-19 % TS and DTX/PEG-PMT-48 % TS micelles performed better than commercial Duopafei formulation in prohibiting growth of CT-26 tumors xenografed in vivo (70 % of tumor-inhibiting efficiency). Biosafety analysis revealed that DTX-loaded PEG-PMT nanoparticles possessed minimal toxicity towards normal organs, such as liver and kidney. These experimental data demonstrated that the pH- and ROS-responsive PEG-PMT micelles are promising vectors for both delivery of anti-tumor drugs and their controlled release at tumor intracellular sites.

Dual Polymerizations: Untapped Potential for Biomaterials

Block copolymers with unique architectures and those that can self-assemble into supramolecular structures are used in medicine as biomaterial scaffolds and delivery vehicles for cells, therapeutics, and imaging agents. To date, much of the work relies on controlling polymer behavior by varying the monomer side chains to add functionality and tune hydrophobicity. Although varying the side chains is an efficient strategy to control polymer behavior, changing the polymer backbone can also be a powerful approach to modulate polymer self-assembly, rigidity, reactivity, and biodegradability for biomedical applications. There are many developments in the syntheses of polymers with segmented backbones, but these developments are not widely adopted as strategies to address the unique constraints and requirements of polymers for biomedical applications. This review highlights dual polymerization strategies for the synthesis of backbone-segmented block copolymers to facilitate their adoption for biomedical applications.

Solubilization and interaction of ciprofloxacin with pluronics and their mixed micelles

The hydrophobic drug ciprofloxacin in the core of mixed micelles of Pluronic F108 and Pluronic L81.

Self-assembly of peptide amphiphiles for drug delivery: the role of peptide primary and secondary structures

Peptide amphiphiles (PAs), functionalized with alkyl chains, are capable of self-assembling into various nanostructures. Recently, PAs have been considered as ideal drug carriers due to their good biocompatibility, specific biological functions, and hypotoxicity to normal cells and tissues. Meanwhile, the nanocarriers formed by PAs are able to achieve controlled drug release and enhanced cell uptake in response to the stimulus of the physiological environment or specific biological factors in the location of the lesion. However, the underlying detailed drug delivery mechanism, especially from the aspect of primary and secondary structures of PAs, has not been systematically summarized or discussed. Focusing on the relationship between the primary and secondary structures of PAs and stimuli-responsive drug delivery applications, this review highlights the recent advances, challenges, and opportunities of PA-based functional drug nanocarriers, and their potential pharmaceutical applications are discussed.

Intratumoral Visualization of Oxaliplatin within a Liposomal Formulation Using X-ray Fluorescence Spectrometry

Microsynchrotron radiation X-ray fluorescence spectrometry (μ-SR-XRF) is an X-ray procedure that utilizes synchrotron radiation as an excitation source. μ-SR-XRF is a rapid, nondestructive technique that allows mapping and quantification of metals and biologically important elements in cell or tissue samples. Generally, the intratumor distribution of nanocarrier-based therapeutics is assessed by tracing the distribution of a labeled nanocarrier within tumor tissue, rather than by tracing the encapsulated drug. Instead of targeting the delivery vehicle, we employed μ-SR-XRF to visualize the intratumoral microdistribution of oxaliplatin (l-OHP) encapsulated within PEGylated liposomes. Tumor-bearing mice were intravenously injected with either l-OHP-containing PEGylated liposomes (l-OHP liposomes) or free l-OHP. The intratumor distribution of l-OHP within tumor sections was determined by detecting the fluorescence of platinum atoms, which are the main elemental components of l-OHP. The l-OHP in the liposomal formulation was localized near the tumor vessels and accumulated in tumors at concentrations greater than those seen with the free form, which is consistent with the results of our previous study that focused on fluorescent labeling of PEGylated liposomes. In addition, repeated administration of l-OHP liposomes substantially enhanced the tumor accumulation and/or intratumor distribution of a subsequent dose of l-OHP liposomes, presumably via improvements in tumor vascular permeability, which is also consistent with our previous results. In conclusion, μ-SR-XRF imaging efficiently and directly traced the intratumor distribution of the active pharmaceutical ingredient l-OHP encapsulated in liposomes within tumor tissue. μ-SR-XRF imaging could be a powerful means for estimating tissue distribution and even predicting the pharmacological effect of nanocarrier-based anticancer metal compounds.

Micelles Formed by Polypeptide Containing Polymers Synthesized Via N-Carboxy Anhydrides and Their Application for Cancer Treatment

The development of multifunctional polymeric materials for biological applications is mainly guided by the goal of achieving the encapsulation of pharmaceutical compounds through a self-assembly process to form nanoconstructs that control the biodistribution of the active compounds, and therefore minimize systemic side effects. Micelles are formed from amphiphilic polymers in a selective solvent. In biological applications, micelles are formed in water, and their cores are loaded with hydrophobic pharmaceutics, where they are solubilized and are usually delivered through the blood compartment. Even though a large number of polymeric materials that form nanocarrier delivery systems has been investigated, a surprisingly small subset of these technologies has demonstrated potentially curative preclinical results, and fewer have progressed towards commercialization. One of the most promising classes of polymeric materials for drug delivery applications is polypeptides, which combine the properties of the conventional polymers with the 3D structure of natural proteins, i.e., α-helices and β-sheets. In this article, the synthetic pathways followed to develop well-defined polymeric micelles based on polypeptides prepared through ring-opening polymerization (ROP) of N-carboxy anhydrides are reviewed. Among these works, we focus on studies performed on micellar delivery systems to treat cancer. The review is limited to systems presented from 2000⁻2017.

A review of solute encapsulating nanoparticles used as delivery systems with emphasis on branched amphipathic peptide capsules

Various strategies are being developed to improve delivery and increase the biological half-lives of pharmacological agents. To address these issues, drug delivery technologies rely on different nano-sized molecules including: lipid vesicles, viral capsids and nano-particles. Peptides are a constituent of many of these nanomaterials and overcome some limitations associated with lipid-based or viral delivery systems, such as tune-ability, stability, specificity, inflammation, and antigenicity. This review focuses on the evolution of bio-based drug delivery nanomaterials that self-assemble forming vesicles/capsules. While lipid vesicles are preeminent among the structures; peptide-based constructs are emerging, in particular peptide bilayer delimited capsules. The novel biomaterial-Branched Amphiphilic Peptide Capsules (BAPCs) display many desirable properties. These nano-spheres are comprised of two branched peptides-bis(FLIVI)-K-KKKK and bis(FLIVIGSII)-K-KKKK, designed to mimic diacyl-phosphoglycerides in molecular architecture. They undergo supramolecular self-assembly and form solvent-filled, bilayer delineated capsules with sizes ranging from 20 nm to 2 μm depending on annealing temperatures and time. They are able to encapsulate different fluorescent dyes, therapeutic drugs, radionuclides and even small proteins. While sharing many properties with lipid vesicles, the BAPCs are much more robust. They have been analyzed for stability, size, cellular uptake and localization, intra-cellular retention and, bio-distribution both in culture and in vivo.

Carbon Nanotube Yarn-Based Glucose Sensing Artificial Muscle

Boronic acid (BA), known to be a reversible glucose-sensing material, is conjugated to a nanogel (NG) derived from hyaluronic acid biopolymer and used as a guest material for a carbon multiwalled nanotube (MWNT) yarn. By exploiting the swelling/deswelling of the NG that originates from the internal anionic charge changes resulting from BA binding to glucose, a NG MWNT yarn artificial muscle is obtained that provides reversible torsional actuation that can be used for glucose sensing. This actuator shows a short response time and high sensitivity (in the 5-100 × 10(-3) m range) for monitoring changes in glucose concentration in physiological buffer, without using any additional auxiliary substances or an electrical power source. It may be possible to apply the glucose-sensing MWNT yarn muscles as implantable glucose sensors that automatically release drugs when needed or as an artificial pancreas.

Curcumin-Loading-Dependent Stability of PEGMEMA-Based Micelles Affects Endocytosis and Exocytosis in Colon Carcinoma Cells

Polymeric micelles were formed from poly(poly(ethylene glycol) methyl ether methacrylate)-block-poly(styrene) (P(PEGMEMA)-b-PS) block copolymer of two different chain lengths. The micelles formed were approximately 16 and 46 nm in diameter and used to encapsulate curcumin. Upon loading of the curcumin into the micelles, their size increased to approximately 34 and 80 nm in diameter, respectively, with a loading efficiency of 58%. The unloaded micelles were not cytotoxic to human colon carcinoma cells, whereas only the smaller loaded micelles were cytotoxic after 72 h of exposure. The micelles were rapidly internalized by the cells within minutes of exposure, with the loaded micelles internalized to a greater extent owing to their enhanced stability compared to that of the unloaded micelles. The larger micelles were more rapidly internalized and exocytosed than the smaller micelles, demonstrating the effect of micelle size and drug loading on drug delivery and cytotoxicity.

Viscoelastic and structural properties of poly(vinyl alcohol)/poly(vinylpyrrolidone) hydrogels

Physical hydrogels were obtained by freezing/thawing of aqueous solutions of 15% poly(vinyl alcohol) (PVA)/poly(vinylpyrrolidone) (PVP) mixtures with different ratios between the polymers.

Barbituric acid–triphenylamine adduct as an AIEE-type molecule and optical probe for mercury(ii)

A barbituric acid–triphenylamine adduct displayed interesting aggregation-induced emission enhancement (AIEE) features in a THF–water co-solvent system and can act as a fluorescence turn-on probe for Hg²⁺.

cRGDyK modified pH responsive nanoparticles for specific intracellular delivery of doxorubicin

Stimuli-responsive nanocarriers attract wide attention because of the unique differences in microenvironment between solid tumors and normal tissues. Herein, we reported a novel cRGDyK peptide modified pH-sensitive nanoparticle system based on poly(ethylene glycol)-poly(2,4,6-trimethoxy benzylidene-pentaerythritol carbonate) (PEG-PTMBPEC) diblock copolymer, which was expected to destroy tumor angiogenesis and kill tumor cells simultaneously. Doxorubicin (DOX)-loaded nanoparticles (NPs) were characterized to have a uniform size distribution, high entrapment efficiency, good stability in plasma as well as a pH dependent drug release pattern. Blank NPs were non-toxic to both tumor cells and normal cells, while DOX-loaded cRGDyK peptide modified NPs (cRGDyK-NPs) exhibited the pronounced cytotoxicity against B16 cells and human umbilical vein endothelial cells (HUVEC) overexpressing αvβ3 integrin receptors. Cellular uptake studies revealed that the highly efficient uptake of cRGDyK-NPs was attributed to the receptor-mediated endocytosis and acidic-triggered drug release. Importantly, cRGDyK-NPs could dramatically reduce the systemic toxicity of DOX and exert excellent tumor killing activity in vivo. The cRGDyK modified pH-sensitive nanocarrier is a promising vehicle for intracellular drug delivery to αvβ3 integrin receptor overexpressed tumor cells and neovascular cells.

STATEMENT OF SIGNIFICANCE

Slow intracellular drug release and poor tumor targeting capacity are still the critical barriers of polymeric nanoparticles (NPs) for the treatment efficiency of chemotherapy. In the present study, we designed cRGDyK peptide modified poly(ethylene glycol)-poly(2,4,6-trimethoxybenzylidene-pentaerythritol carbonate) (cRGDyK-PEG-PTMBPEC) NPs with active targeting and fast pH-triggered drug release. Doxorubicin (DOX)-loaded cRGDyK-PEG-PTMBPEC NPs exhibited pronounced cytotoxicity and enhanced cellular uptake against B16 cells and human umbilical vein endothelial cells overexpressing αvβ3 integrin receptors. Moreover, the active targeted pH-sensitive NPs can enhance the antitumor activity and reduce the systematic toxicity of DOX in vivo.

Tumor-targeted docetaxel-loaded hyaluronic acid-quercetin polymeric micelles with p-gp inhibitory property for hepatic cancer therapy

Herein, a novel targeted drug delivery nanosystem based on hyaluronic acid (HA) and quercetin (QU) was designed to improve the in vivo therapeutic efficacy of DTX on HC through HA-CD44 mediated targeting and QU-based p-gp efflux inhibition.

Beta-Sheet-Forming, Self-Assembled Peptide Nanomaterials towards Optical, Energy, and Healthcare Applications

Peptide self-assembly is an attractive route for the synthesis of intricate organic nanostructures that possess remarkable structural variety and biocompatibility. Recent studies on peptide-based, self-assembled materials have expanded beyond the construction of high-order architectures; they are now reporting new functional materials that have application in the emerging fields such as artificial photosynthesis and rechargeable batteries. Nevertheless, there have been few reviews particularly concentrating on such versatile, emerging applications. Herein, recent advances in the synthesis of self-assembled peptide nanomaterials (e.g., cross β-sheet-based amyloid nanostructures, peptide amphiphiles) are selectively reviewed and their new applications in diverse, interdisciplinary fields are described, ranging from optics and energy storage/conversion to healthcare. The applications of peptide-based self-assembled materials in unconventional fields are also highlighted, such as photoluminescent peptide nanostructures, artificial photosynthetic peptide nanomaterials, and lithium-ion battery components. The relation of such functional materials to the rapidly progressing biomedical applications of peptide self-assembly, which include biosensors/chips and regenerative medicine, are discussed. The combination of strategies shown in these applications would further promote the discovery of novel, functional, small materials.

Size Control of (99m)Tc-tin Colloid Using PVP and Buffer Solution for Sentinel Lymph Node Detection

Colloidal particle size is an important characteristic that allows mapping sentinel nodes in lymphoscintigraphy. This investigation aimed to introduce different ways of making a (99m)Tc-tin colloid with a size of tens of nanometers. All agents, tin fluoride, sodium fluoride, poloxamer-188, and polyvinylpyrrolidone (PVP), were mixed and labeled with (99m)Tc. Either phosphate or sodium bicarbonate buffers were used to adjust the pH levels. When the buffers were added, the size of the colloids increased. However, as the PVP continued to increase, the size of the colloids was controlled to within tens of nanometers. In all samples, phosphate buffer added PVP (30 mg) stabilized tin colloid ((99m)Tc-PPTC-30) and sodium bicarbonate solution added PVP (50 mg) stabilized tin colloid ((99m)Tc-BPTC-50) were chosen for in vitro and in vivo studies. (99m)Tc-BPTC-50 (<20 nm) was primarily located in bone marrow and was then secreted through the kidneys, and (99m)Tc-PPTC-30 (>100 nm) mainly accumulated in the liver. When a rabbit was given a toe injection, the node uptake of (99m)Tc-PPTC-30 decreased over time, while (99m)Tc-BPTC-50 increased. Therefore, (99m)Tc-BPTC-50 could be a good candidate radiopharmaceutical for sentinel node detection. The significance of this study is that nano-sized tin colloid can be made very easily and quickly by PVP.

Selective delivery of oxaliplatin to tumor tissue by nanocarrier system enhances overall therapeutic efficacy of the encapsulated oxaliplatin

Oxaliplatin (trans-l-diaminocyclohexane oxalatoplatinum; l-OHP), a third-generation platinum antitumor drug, is currently approved in combination with 5-flurouracil (5-FU)/leucovorin (FOLFOX) for standard first- and second-line treatment of metastatic or advanced-stage colorectal cancer. Despite l-OHP's better tolerability in comparison with other platinum compounds such as cisplatin and carboplatin, its clinical efficiency is limited by the dose-limiting side effects including cumulative neurotoxicity and acute dysesthesias. In addition, like other platinum chemotherapeutic agents, l-OHP therapy is limited by reduced accumulation levels in tumor tissues, nonselective accumulation in healthy organs and/or tissues, inactivation by conjugation with glutathione, and the development of drug resistance. Accordingly, successful outcome of cancer treatment using l-OHP requires selective delivery of a relatively high concentration of the drug to tumor tissues. In this review we focus on utilization of different drug-delivery vehicles such as liposomes, polymeric nanocarriers, and carbon nanotubes in enhancing selective delivery of l-OHP to tumor tissues and consequently improving overall efficacy of l-OHP-containing drug-delivery systems.

Nanodrug delivery in reversing multidrug resistance in cancer cells

Different mechanisms in cancer cells become resistant to one or more chemotherapeutics is known as multidrug resistance (MDR) which hinders chemotherapy efficacy. Potential factors for MDR includes enhanced drug detoxification, decreased drug uptake, increased intracellular nucleophiles levels, enhanced repair of drug induced DNA damage, overexpression of drug transporter such as P-glycoprotein(P-gp), multidrug resistance-associated proteins (MRP1, MRP2), and breast cancer resistance protein (BCRP). Currently nanoassemblies such as polymeric/solid lipid/inorganic/metal nanoparticles, quantum dots, dendrimers, liposomes, micelles has emerged as an innovative, effective, and promising platforms for treatment of drug resistant cancer cells. Nanocarriers have potential to improve drug therapeutic index, ability for multifunctionality, divert ABC-transporter mediated drug efflux mechanism and selective targeting to tumor cells, cancer stem cells, tumor initiating cells, or cancer microenvironment. Selective nanocarrier targeting to tumor overcomes dose-limiting side effects, lack of selectivity, tissue toxicity, limited drug access to tumor tissues, high drug doses, and emergence of multiple drug resistance with conventional or combination chemotherapy. Current review highlights various nanodrug delivery systems to overcome mechanism of MDR by neutralizing, evading, or exploiting the drug efflux pumps and those independent of drug efflux pump mechanism by silencing Bcl-2 and HIF1α gene expressions by siRNA and miRNA, modulating ceramide levels and targeting NF-κB. “Theragnostics” combining a cytotoxic agent, targeting moiety, chemosensitizing agent, and diagnostic imaging aid are highlighted as effective and innovative systems for tumor localization and overcoming MDR. Physical approaches such as combination of drug with thermal/ultrasound/photodynamic therapies to overcome MDR are focused. The review focuses on newer drug delivery systems developed to overcome MDR in cancer cell.

Poly(Acrylic Acid-b-Styrene) Amphiphilic Multiblock Copolymers as Building Blocks for the Assembly of Discrete Nanoparticles

In order to expand the utility of current polymeric micellar systems, we have developed amphiphilic multiblock copolymers containing alternating blocks of poly(acrylic acid) and poly(styrene). Heterotelechelic poly(tert-butyl acrylate-b-styrene) diblock copolymers containing an α-alkyne and an ω-azide were synthesized by atom transfer radical polymerization (ATRP), allowing control over the molecular weight while maintaining narrow polydispersity indices. The multiblock copolymers were constructed by copper-catalyzed azide-alkyne cycloaddition of azide-alkyne end functional diblock copolymers which were then characterized by (1)H NMR, FT-IR and SEC. The tert-butyl moieties of the poly(tert-butyl acrylate-b-styrene) multiblock copolymers were easily removed to form the poly(acrylic acid-b-styrene) multiblock copolymer ((PAA-PS)(9)), which contained up to 9 diblock repeats. The amphiphilic multiblock (PAA-PS)(9) (M(n) = 73.3 kg/mol) was self-assembled by dissolution into tetrahydrofuran and extensive dialysis against deionized water for 4 days. The critical micelle concentration (CMC) for (PAA-PS)(9) was determined by fluorescence spectroscopy using pyrene as a fluorescent probe and was found to be very low at 2 × 10(-4) mg/mL. The (PAA-PS)(9) multiblock was also analyzed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The hydrodynamic diameter of the particles was found to be 11 nm. Discrete spherical particles were observed by TEM with an average particle diameter of 14 nm. The poly(acrylic acid) periphery of the spherical particles should allow for future conjugation of biomolecules.

Biohybrid block copolymers: towards functional micelles and vesicles

This critical review covers the elaboration of micelles and vesicles made from block copolymers containing peptide or oligonucleotide blocks with a focus on recent developments toward responsive and functional assemblies (166 references).

Advances in polymeric micelles for drug delivery and tumor targeting

A plethora of formulation techniques have been reported in the literature for targeting drugs to specific sites. Polymeric micelles (PMs) can be targeted to tumor sites by passive as well as active mechanisms. Some inherent properties of PMs, including size in the nanorange, stability in plasma, longevity in vivo, and pathological characteristics of tumor allow PMs to be targeted to the tumor site by a passive mechanism called the enhanced permeability and retention effect. PMs formed from an amphiphilic block copolymer are suitable for encapsulation of poorly water-soluble, hydrophobic anticancer drugs. Other characteristics of PMs such as separate functionality at the outer shell are useful for targeting the anticancer drug to tumor by active mechanisms. PMs can be conjugated with many ligands such as antibody fragments, epidermal growth factors, α(2)-glycoprotein, transferrin, and folate to target micelles to cancer cells. Application of heat or ultrasound are the alternative methods to enhance drug accumulation in tumoral cells. Targeting using micelles can also be directed toward tumor angiogenesis, which is a potentially promising target for anticancer drugs. PMs have been used for the delivery of many anticancer agents in preclinical and clinical studies. This review summarizes recently available information regarding targeting of anticancer drugs to the tumor site using PMs.

Self-Assembled Hydrogel Nanoparticles for Drug Delivery Applications

Hydrogel nanoparticles—also referred to as polymeric nanogels or macromolecular micelles—are emerging as promising drug carriers for therapeutic applications. These nanostructures hold versatility and properties suitable for the delivery of bioactive molecules, namely of biopharmaceuticals. This article reviews the latest developments in the use of self-assembled polymeric nanogels for drug delivery applications, including small molecular weight drugs, proteins, peptides, oligosaccharides, vaccines and nucleic acids. The materials and techniques used in the development of self-assembling nanogels are also described.