Cross-linked chitosan microspheres for oral delivery of insulin: Taguchi design and in vivo testing

pH-Sensitive Chitosan-Based Hydrogels Trap Poloxamer Micelles as a Dual-Encapsulating Responsive System for the Loading and Delivery of Curcumin

pH-sensitive hydrogels are important soft biomaterials as they mimic biological organisms by altering their properties in response to small pH changes in biological fluids. In this work, novel chitosan (Cs) hydrogels were developed using an innovative dual curcumin (Cur) encapsulation system. Cur was loaded into poloxamer 407 micelles and incorporated into citric acid (CA) cross-linked Cs hydrogels using a central composite design. The hydrogels were characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), rheological tests, and in vitro experiments, such as hemolysis and cytotoxicity assays. FTIR confirmed cross-linking between Cs and CA, while DSC suggested interactions between Cur-loaded micelles and the hydrogel matrix. Rheological analysis revealed gel-like behavior, with G' consistently higher than G, and temperature influenced hydrogel properties. SEM showed a denser network when Cur-loaded micelles were incorporated, slowing Cur release. At physiological pH (7.4), 75% of Cur was released after 7 days, while 84% was released at pH 5.5, showing pH-responsive behavior. Cytotoxicity tests showed over 80% viability of VERO CCL-81 cells (0.2-20 ppm hydrogel). This dual-encapsulation system provides a simple and effective platform for loading lipophilic drugs into pH-responsive hydrogels.

Oral administration of PEDV-dissolved Alg-CS gel induces high and sustained mucosal immunity in mice

Porcine epidemic diarrhea (PED) is a serious disease in piglets that leads to high mortality. An effective measure that provides higher IgA levels in the intestine and milk is required to decrease losses. Porcine epidemic diarrhea virus (PEDV) was dissolved in calcium alginate (Alg) and combined with chitosan (CS) via electrostatic interactions between cationic chitosan and anionic alginate to create a porous gel (Alg-CS+PEDV). The gel was used to immunize mice orally or in combination with subcutaneous injections of inactivated PEDV vaccine. At 12 and 24 days after immunization, levels of IgA and IgG in Alg-CS+PEDV were higher than with normal PEDV oral administration. At 24 days after immunization, the concentration of IFN-γ in Alg-CS+PEDV was higher than with normal PEDV oral administration. Furthermore, oral administration combining subcutaneous immunization induced higher levels of IgG and IgA than oral administration alone. Our study provides a new method for the preparation and administration of oral vaccines to achieve enhanced mucosal immunity against PEDV.

Development of Bilayer Tablet Containing Saxagliptin Immediate Release and Metformin Sustained Release Using Quality by Design Approach

Objective:

Adequate glycemic control in diabetes patients requires oral combination therapy. Saxagliptin is a dipeptidyl peptidase-4 inhibitor having fewer adverse effects, and metformin is the first-line medicine for diabetes treatment. The aim of this research work is to develop a bilayer tablet of saxagliptin and metformin in fixed-dose combination (FDC) using quality by design (QbD) to acquire the immediate release of saxagliptin and sustained release of metformin from bilayer tablet to ultimately achieve superior patient compliance.

Methods:

The development of the bilayer tablet was done in four stages using QbD. In the first step, quality target product profile (QTPP) of bilayer tablet was defined, and critical quality attributes (CQAs) were identified by risk estimation matrix and taguchi design; an immediate release saxagliptin layer was optimized in the second step, optimization of sustained-release metformin layer was carried out in the third step, and in the final step, bilayer tablet was prepared and characterized. The effect of independent parameters, i.e., magnesium stearate level (X1), kneading time (X2) and lubrication time (X3) on Carr’s Index (Y1), percentage relative standard deviation of content uniformity (Y2) and drug release at 30 minutes (Y3), were estimated for optimization of immediate release saxagliptin layer using Box-Behnken design (BBD). The effect of independent parameters, i.e., hydroxypropyl methylcellulose level (X4), compritol level (X5) and magnesium stearate level (X6) on Carr’s Index (Y4), drug release at 2 h (Y5), drug release at 5 h (Y6) and drug release at 10 h (Y7) were estimated for optimization of sustained-release metformin layer using BBD.

Results:

The optimized composition of immediate release saxagliptin layer estimated using numerical optimization by Design expert was 0.88% (X1), 15 minutes (X2) and 3.85 minutes (X3) with predicted variables, i.e., 10.59% (Y1), 3.16% (Y2) and 85% (Y3). The optimized composition of sustained- release saxagliptin layer predicted through numerical optimization was 30% (X4), 3.36% (X5) and 0.9% (X6) having 10.89% (Y4), 43.44% (Y5), 60% (Y6) and 85.14% (Y7). In-vitro dissolution study of bilayer tablet showed immediate release of Saxagliptin (approximately 85% in 30 minutes) and sustained release of metformin illustrating 43.21±1.21, 60.86±2.96 and 86.26±1.38% drug release at 2, 5 and 10 h, respectively. The release exponent for the Korsmeyer-Peppas model for Saxagliptin and metformin was 0.237 (<0.45) and 1.536 (n>0.85), indicating Fickian and super case II transport drug release behavior, respectively.

Conclusion:

By QbD approach, bilayer tablet containing saxagliptin and metformin was successfully developed, and influence of various formulation parameters on CQAs of drug products was understood with fewer experiments. This leads to the conclusion that cost can be reduced using QbD in the development of FDC for improving patient compliance.

Development and microbiological evaluation of chitosan and chitosan-alginate microspheres for vaginal administration of metronidazole

Metronidazole is the drug of choice in the treatment of bacterial vaginosis, but the oral therapy can induce several collateral effects. Aim of this work was the development of a vaginal multiparticulate system, loaded with metronidazole, able to improve its residence time allowing a complete drug release. Several kinds of MS were prepared using chitosan dissolved in different organic acids or alginate coated with chitosan. FTIR and DSC analyses were performed to study the interactions between the drug and the polymers, while MS morphology was investigated with optical and electron microscopy. All the formulations were characterized in terms of drug entrapment efficiency, mucoadhesion, swelling capacity and drug release behavior, demonstrating the best results for alginate MS coated with chitosan. The formulations evidenced a complete and rapid release of drug, compared with the commercial form: Zidoval®.The best formulations assayed for antibacterial activity confirmed the suitability of this new formulation for the vaginal treatment of local diseases.

TPP ionically cross-linked chitosan/PLGA microspheres for the delivery of NGF for peripheral nerve system repair

To control the release of nerve growth factor (NGF) in the injured peripheral nerve, NGF-loaded chitosan/PLGA composite microspheres ionically cross-linked by tripolyphosphate (TPP/Chitosan/PLGA-NGF) were prepared. The encapsulation efficiency of NGF ranged from 83.4 ± 1.5 % to 72.1 ± 1.6 % with TPP concentrations from 1 % to 10 %. Zeta potential and FT-IR analyses together with confocal microscopy demonstrated that multiple NGF-loaded PLGA microspheres were embedded in chitosan matrix, the mean size of TPP/Chitosan/PLGA-NGF microspheres ranged from 40.2 ± 3.4 to 49.3 ± 3.1 μm. The increase of TPP concentration improved the network stability and decreased the swelling ratio, resulting in the decreased NGF release from 67.7 ± 1.2 % to 45.7 ± 0.8 % in 49 days. The sustained release of NGF could promote PC12 cells differentiation and neurite growth in vitro. Moreover, in comparison with NGF solution without microencapsulation, TPP/Chitosan/PLGA-NGF microspheres enhanced sciatic nerve regeneration and prevented gastrocnemius muscle atrophy in rats. These results demonstrate the feasibility of using TPP/Chitosan/PLGA-NGF microspheres for neural tissue repair.

The role of polysaccharides from natural resources to design oral insulin micro- and nanoparticles intended for the treatment of Diabetes mellitus: A review

Oral administration of insulin (INS) would represent a revolution in the treatment of diabetes, considering that this route mimics the physiological dynamics of endogenous INS. Nano- and microencapsulation exploiting the advantageous polysaccharides properties has been considered an important technological strategy to protect INS against harsh conditions of gastrointestinal tract, in the same time that improve the permeability via transcellular and/or paracellular pathways, safety and in some cases even selectivity for targeting delivery of INS. In fact, some polysaccharides also give to the systems functional properties such as pH-responsiveness, mucoadhesiveness under specific physiological conditions and increased intestinal permeability. In general, all polysaccharides can be functionalized with specific molecules becoming more selective to the cells to which INS is delivered. The present review highlights the advances in the past 10 years on micro- and nanoencapsulation of INS exploiting the unique natural properties of polysaccharides, including chitosan, starch, alginate, pectin, and dextran, among others.

Applications of Natural, Semi-Synthetic, and Synthetic Polymers in Cosmetic Formulations

Cosmetics composed of synthetic and/or semi-synthetic polymers, associated or not with natural polymers, exhibit a dashing design, with thermal and chemo-sensitive properties. Cosmetic polymers are also used for the preparation of nanoparticles for the delivery of, e.g., fragrances, with the purpose to modify their release profile and also reducing the risk of evaporation. Besides, other cosmetically active nutrients, dermal permeation enhancers, have also been loaded into nanoparticles to improve their bioactivities on the skin. The use of natural polymers in cosmetic formulations is of particular relevance because of their biocompatible, safe, and eco-friendly character. These formulations are highly attractive and marketable to consumers, and are suitable for a plethora of applications, including make-up, skin, and hair care, and as modifiers and stabilizers. In this review, natural synthetic, semi-synthetic, and synthetic polymers are discussed considering their properties for cosmetic applications. Their uses in conventional and novel formulations are also presented.

Optimization of phytic acid-crosslinked chitosan microspheres for oral insulin delivery using response surface methodology

Although oral administration is favorable mode of insulin delivery, it is the most challenging route, owing to poor oral bioavailability. In this study, a chitosan (CS)-based insulin delivery system was developed by ionic crosslinking with phytic acid (PA). CS-PA microspheres were optimized with different crosslinking conditions of CS and PA using response surface methodology to retain insulin during preparation and gastric digestion. Furthermore, the in vitro release profile, morphological structure, cytotoxicity, and intestinal permeability of the optimized microspheres, and its hypoglycemic effect in diabetic rats were evaluated. Under optimal conditions, the entrapment efficiency was 97.1%, and 67.0% of insulin was retained in the microspheres after 2 h of gastric digestion followed by a sustained-release in intestinal fluid. Insulin was primarily distributed in the microsphere core with a monodisperse diameter of 663.3 μm. The microspheres increased the permeability of insulin across Caco-2/HT-29 monolayers by 1.6 times with negligible cytotoxicity. The microspheres had a relative pharmacological bioavailability of 10.6% and significantly reduced blood glucose levels with a long-lasting hypoglycemic effect after oral administration in diabetic rats. This study demonstrated that an optimized formulation of a simple ionic crosslinking system using CS and PA could facilitate efficient oral delivery of insulin.

Biodegradable 131 Iodine-Labeled Microspheres: Potential Transarterial Radioembolization Biomaterial for Primary Hepatocellular Carcinoma Treatment

Transarterial radioembolization with radionuclide-labeled microspheres is successfully used in hepatocellular carcinoma (HCC) treatment, but the non-biodegradability and rapid settlement of the microsphere material are associated with unsatisfied distribution and unable for multiple administrations. In this study, a novel biodegradable chitosan-collagen composite microsphere (CCM) with ideal settlement rate is prepared. The Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) results indicate CCMs have desirable shapes with diameters around 10 µm, and considerable biodegradability within 12 weeks. These CCMs are successfully radiolabeled with ¹³¹ I and processed efficiency of 70.4 MBq mg^-1 of microspheres as well as favorable stability in vitro. Then, ¹³¹ I-CCMs are injected into rats with orthotopic HCC via the hepatic artery which effectively improves the median overall survival from 19 to 44 days (p < 0.05). Single photon emission computed tomography (SPECT/CT) imaging and immunohistochemical analysis indicate well-localized biodistribution and consistent stability of ¹³¹ I-CCMs in the liver over 28 days. Magnetic resonance imaging (MRI) and gross specimens monitoring confirm the inhibited tumor growth after ¹³¹ I-CCMs treatment. In conclusion, these biodegradable ¹³¹ I-CCMs exhibit optimal radiolabeling efficiency, stability, and favorably radioembolization effect for orthotopic HCC in a rodent model, suggesting potential for interventional cancer therapy.

Modulation of Entrapment Efficiency and In Vitro Release Properties of BSA-Loaded Chitosan Microparticles Cross-Linked with Citric Acid as a Potential Protein-Drug Delivery System

Microparticles, aimed for oral protein and peptide drug delivery, were prepared via emulsion cross-linking using citric acid as cross-linker and polyglycerol polyricinoleate as surfactant. A comparative study of the interaction between chitosan and citric acid and its effect on the resulting microparticle properties was performed using different chitosan-to-cross-linker mass ratios and pH-values during fabrication of the microparticles. Non-cross-linked and cross-linked microparticles were studied in terms of size (4-12 μm), zeta potential (-15.7 to 12.8 mV), erosion (39.7-75.6%), a model protein encapsulation efficiency (bovine serum albumin) (6.8-27.6%), and loading capacity (10.4-40%). Fourier transform infrared spectroscopy and X-ray diffraction confirmed the ionic interaction between the protonated amine groups of chitosan and the carboxylate ions of the cross-linking agent. Scanning electron microscopy revealed that the non-cross-linked microparticles had an uneven shape with wrinkled surfaces, while the cross-linked formulations were spherical in shape with smooth surfaces. On the basis of these data, the role of the surfactant and microparticle structure on the release mechanism was proposed. Control of the microparticle shape and release mechanisms is expected to be crucial in developing carriers for the controlled delivery of proteins and peptides.

In Vitro Characterization, Modelling, and Antioxidant Properties of Polyphenon-60 from Green Tea in Eudragit S100-2 Chitosan Microspheres

Eudragit S100-coated chitosan microspheres (S100Ch) are proposed as a new oral delivery system for green tea polyphenon-60 (PP60). PP60 is a mixture of polyphenolic compounds, known for its active role in decreasing oxidative stress and metabolic risk factors involved in diabetes and in other chronic diseases. Chitosan-PP60 microspheres prepared by an emulsion cross-linking method were coated with Eudragit S100 to ensure the release of PP60 in the terminal ileum. Different core–coat ratios of Eudragit and chitosan were tested. Optimized chitosan microspheres were obtained with a chitosan:PP60 ratio of 8:1 (Ch-PP60_8:1), rotation speed of 1500 rpm, and surfactant concentration of 1.0% (m/v) achieving a mean size of 7.16 µm. Their coating with the enteric polymer (S100Ch-PP60) increased the mean size significantly (51.4 µm). The in vitro modified-release of PP60 from S100Ch-PP60 was confirmed in simulated gastrointestinal conditions. Mathematical fitting models were used to characterize the release mechanism showing that both Ch-PP60_8:1 and S100Ch-PP60 fitted the Korsmeyers–Peppas model. The antioxidant activity of PP60 was kept in glutaraldehyde-crosslinked chitosan microspheres before and after their coating, showing an IC₅₀ of 212.3 µg/mL and 154.4 µg/mL, respectively. The potential of chitosan microspheres for the delivery of catechins was illustrated, with limited risk of cytotoxicity as shown in Caco-2 cell lines using the 3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The beneficial effects of green tea and its derivatives in the management of metabolic disorders can be exploited using mucoadhesive chitosan microspheres coated with enteric polymers for colonic delivery.

Nanopharmaceutics: Part II-Production Scales and Clinically Compliant Production Methods

Due the implementation of nanotechnologies in the pharmaceutical industry over the last few decades, new type of cutting-edge formulations-nanopharmaceutics-have been proposed. These comprise pharmaceutical products at the nanoscale, developed from different types of materials with the purpose to, e.g., overcome solubility problems of poorly water-soluble drugs, the pharmacokinetic and pharmacodynamic profiles of known drugs but also of new biomolecules, to modify the release profile of loaded compounds, or to decrease the risk of toxicity by providing site-specific delivery reducing the systemic distribution and thus adverse side effects. To succeed with the development of a nanopharmaceutical formulation, it is first necessary to analyze the type of drug which is to be encapsulated, select the type matrix to load it (e.g., polymers, lipids, polysaccharides, proteins, metals), followed by the production procedure. Together these elements have to be compatible with the administration route. To be launched onto the market, the selected production method has to be scaled-up, and quality assurance implemented for the product to reach clinical trials, during which in vivo performance is evaluated. Regulatory issues concerning nanopharmaceutics still require expertise for harmonizing legislation and a clear understanding of clinically compliant production methods. The first part of this study addressing "Nanopharmaceutics: Part I-Clinical trials legislation and Good Manufacturing Practices (GMP) of nanotherapeutics in the EU" has been published in Pharmaceutics. This second part complements the study with the discussion about the production scales and clinically compliant production methods of nanopharmaceutics.

Nanoparticle Delivery Systems in the Treatment of Diabetes Complications

Diabetes mellitus, an incurable metabolic disease, is characterized by changes in the homeostasis of blood sugar levels, being the subcutaneous injection of insulin the first line treatment. This administration route is however associated with limited patient's compliance, due to the risk of pain, discomfort and local infection. Nanoparticles have been proposed as insulin carriers to make possible the administration of the peptide via friendlier pathways without the need of injection, i.e., via oral or nasal routes. Nanoparticles stand for particles in the nanometer range that can be obtained from different materials (e.g., polysaccharides, synthetic polymers, lipid) and are commonly used with the aim to improve the physicochemical stability of the loaded drug and thereby its bioavailability. This review discusses the use of different types of nanoparticles (e.g., polymeric and lipid nanoparticles, liposomes, dendrimers, niosomes, micelles, nanoemulsions and also drug nanosuspensions) for improved delivery of different oral hypoglycemic agents in comparison to conventional therapies.

Transferrin-Conjugated Docetaxel-PLGA Nanoparticles for Tumor Targeting: Influence on MCF-7 Cell Cycle

Targeted drug delivery systems are commonly used to improve the therapeutic index of anti-cancer drugs by increasing their selectivity and reducing systemic distribution and toxicity. Ligand-conjugated nanoparticles (NPs) can be effectively applied for active chemotherapeutic targeting to overexpressed receptors of tumor cells. In this study, transferrin (Tf) was successfully conjugated with poly-l-lactic-co-glycolic acid (PLGA) using ethylene diamine confirmed by NMR, for the loading of docetaxel trihydrate (DCT) into PLGA nanoparticles (NPs). The DCT-loaded Tf-conjugated PLGA NPs were produced by an emulsion-solvent evaporation technique, and a 3² full factorial design was used to optimize the nanoparticle formulations. The DCT-loaded Tf-conjugated PLGA NPs were characterized by FTIR spectroscopy, differential scanning calorimetry, powder X-ray diffraction (PXRD), TEM, particle size, and zeta potential analysis. In vitro release kinetics confirmed that release of DCT from the designed formulations followed a zero-order kinetics and a diffusion controlled non-Fickian release profile. The DCT-loaded Tf-conjugated PLGA NPs were evaluated in vitro in MCF-7 cells for bioactivity assessment. Cytotoxicity studies confirmed that the Tf-conjugated PLGA NPs were more active than the non-conjugated counterparts. Cell uptake studies re-confirmed the ligand-mediated active targeting of the formulated NPs. From the cell cycle analysis, the anti-cancer activity of DCT-loaded Tf-conjugated PLGA NPs was shown to occur by arresting the G₂/M phase.

Effect of Polysaccharide Sources on the Physicochemical Properties of Bromelain-Chitosan Nanoparticles

Bromelain, a set of proteolytic enzymes potential pharmaceutical applications, was encapsulated in chitosan nanoparticles to enhance enzyme stability, and the effect of different chitosan sources was evaluated. Chitosan types (i.e., low molecular weight chitosan, chitosan oligosaccharide lactate, and chitosan from shrimp shells) produced nanoparticles with different physicochemical properties, however in all cases, particle size and zeta potential decreased, and polydispersity index increased after bromelain addition. Bromelain encapsulation was higher than 84% and 79% for protein content and enzymatic activity, respectively, with low molecular weight chitosan presenting the highest encapsulation efficiency. Nanoparticle suspension was also tested for accelerated stability and rheological behavior. For the chitosan-bromelain nanoparticles, an instability index below 0.3 was recorded and, in general, the loading of bromelain in chitosan nanoparticles decreased the cohesiveness of the final suspension.

Sugar-Lowering Drugs for Type 2 Diabetes Mellitus and Metabolic Syndrome-Review of Classical and New Compounds: Part-I

Diabetes mellitus (DM) is a metabolic disorder characterized by chronic hyperglycemia together with disturbances in the metabolism of carbohydrates, proteins and fat, which in general results from an insulin availability and need imbalance. In a great number of patients, marketed anti-glycemic agents have shown poor effectiveness in maintaining a long-term glycemic control, thus being associated with severe adverse effects and leading to an emerging interest in natural compounds (e.g., essential oils and other secondary plant metabolites, namely, flavonoid-rich compounds) as a novel approach for prevention, management and/or treatment of either non-insulin-dependent diabetes mellitus (T2DM, type 2 DM) and/or Metabolic Syndrome (MS). In this review, some of these promising glucose-lowering agents will be comprehensively discussed.

Association of Platelet-Rich Plasma and Auto-Crosslinked Hyaluronic Acid Microparticles: Approach for Orthopedic Application

Platelet-rich plasma (PRP) associated with high molecular weight hyaluronic acid (HA) has been clinically used for tissue regeneration in orthopedics. Despite the recognized beneficial clinical outcomes (e.g., early pain control, improvement of patients' functional limitation and longer-term effectiveness compared to PRP and HA alone in mild and moderate osteoarthritis treatments), its use is still challenging and controversial due to lack of standardization of association practical protocols. Moreover, most studies neglect the matrix structure, that generates the ultimate properties of the association among platelets, fibrin network and the microparticles. In the present work, we aimed to analyze the influence of the PRP/HA association with a controlled matrix structure on the stability, rheological behavior, release of growth factors and in vitro proliferation of human adipose-derived mesenchymal cells (h-AdMSCs). The attenuation of the negative charge of HA was also evaluated. Pure PRP (P-PRP) (i.e., plasma enriched with platelets and poor in leukocytes) was prepared by centrifugation and activated with serum and calcium chloride (_AP-PRP). Autocrosslinked hyaluronic acid (AHA) was prepared by organocatalyzed auto-esterification and structured in microparticles (_MPAHA) by shearing. The attenuation of the negative charge of _MPAHA was performed with chitosan (CHT) by polyelectrolyte complexation yielding _MPAHA-CHT. The results showed that microparticles (MPs) have viscoelastic properties, extrusion force and swelling ratio appropriate for injectable applications. The association of _AP-PRP with the controlled structure of _MPAHA and _MPAHA-CHT formed a matrix composed of platelets and of a fibrin network with fibers around 160 nm located preferably on the surface of the MPs with an average diameter of 250 μm. Moreover, _AP-PRP/_MPAHA and _AP-PRP/_MPAHA-CHT associations were non-toxic and supported controlled growth factor (PDGF-AB and TGF-β1) release and in vitro proliferation of h-AdMSC with a similar pattern to that of _AP-PRP alone. The best h-AdMSC proliferation was obtained with the _AP-PRP/_MPAHA-CHT_75:25 indicating that the charge attenuation improved the cell proliferation. Thus, the association of _AP-PRP with the controlled structure of HA can be a valuable approach for orthopedic applications.

Construction and Swelling Properties of Thermosensitive N-isopropyl Acrylamide Microspheres With Controllable Size

In recent years, thermosensitive poly(N-isopropylacrylamide) (PNIPAM) microspheres have received extensive attention due to their many advantages, and their size and swelling ratio are two crucial factors. In this paper, homogeneous and hollow thermosensitive microspheres were prepared by free radical polymerization in an aqueous solution. The effects of the process parameters on the size of the microspheres were studied. The results indicated that the change in size during reaction at different temperatures was not obvious. The size of the microspheres ranged from 802 ± 35.4 nm to 423 ± 33.7 nm with the changes in the dosage of the initiator. Meanwhile, it was observed that the size of microspheres was slightly reduced due to the increase of reaction time. When the dosage of methyl methacrylate (MAA) is increased, the size of the hollow microspheres increased by more than 110%. The average size of the microspheres was smaller when the content of sodium dodecyl sulfate (SDS) was 3 wt%. The microspheres with varying reaction parameters showed a continuous decreasing swelling ratio when the temperatures were changed from 28 °C to 35 °C. In comparison with homogeneous microspheres, the average swelling ratio of hollow microspheres was larger.

In vitro SPF and Photostability Assays of Emulsion Containing Nanoparticles with Vegetable Extracts Rich in Flavonoids

The aim of study was to determine the in vitro sun protection factor (SPF) and the photostability profile of a topical formulation composed of nanoparticles loaded with vegetable extracts and to assess its physicochemical properties. Chitosan/tripolyphosphate (TPP) nanoparticles loaded with flavonoids-enriched vegetable extracts (Ginkgo biloba L., Dimorphandra mollis Benth, Ruta graveolens, and Vitis vinifera L.) were produced and characterized for their morphology, mean particle size, zeta potential, and encapsulation efficiency. A final topical formulation was obtained by dispersing chitosan/TPP nanoparticles in an o/w emulsion. Results showed that nanoparticles dispersion exhibited yellowish color, spherical shape, and uniform appearance. Extract-loaded chitosan/TPP nanoparticles showed a mean particle size of 557.11 ± 3.1 nm, polydispersity index of 0.39 ± 0.27, zeta potential of + 11.54 ± 2.1 mV, and encapsulation efficiency of 75.89% of rutin. The recorded texture parameters confirm that the developed formulation is appropriate for skin application. The SPF obtained was 2.3 ± 0.4, with a critical wavelength of 387.0 nm and 0.69 UVA/UVB ratio. The developed formulation exhibited photostability, allowing the release of flavonoids from nanoparticles while retaining rutin into the skin in a higher extension.

Enhanced Antibacterial Activity of Silver Doped Titanium Dioxide-Chitosan Composites under Visible Light

Nano titanium dioxide (TiO₂) with photocatalytic activity was firstly modified by diethanolamine, and it was then doped with broad spectrum antibacterial silver (Ag) by in situ method. Further, both Ag doped TiO₂-chitosan (STC) and TiO₂-chitosan (TC) composites were prepared by the inverse emulsion cross-linking reaction. The antibacterial activities of STC composites were studied and their antibacterial mechanisms under visible light were investigated. The results show that in situ doping and inverse emulsion method led to good dispersion of Ag and TiO₂ nanoparticles on the cross-linked chitosan microsphere. The STC with regular particle size of 1–10 μm exhibited excellent antibacterial activity against E. coli, P. aeruginosa and S. aureus under visible light. It is believed that STC with particle size of 1–10 μm has large specific surface area to contact with bacterial cell wall. The increased antibacterial activity was attributed to the enhancement of both electron-hole separations at the surface of nano-TiO₂ by the silver ions under the visible light, and the synergetic and sustained release of strong oxidizing hydroxyl radicals of nano-TiO₂, together with silver ions against bacteria. Thus, STC composites have great potential applications as antibacterial agents in the water treatment field.

Chitosan Microsphere Used as an Effective System to Deliver a Linked Antigenic Peptides Vaccine Protect Mice Against Acute and Chronic Toxoplasmosis

Multiple antigenic peptide (MAP) vaccines have advantages over traditional Toxoplasma gondii vaccines, but are more susceptible to enzymatic degradation. As an effective delivery system, chitosan microspheres (CS) can overcome this obstacle and act as a natural adjuvant to promote T helper 1 (Th1) cellular immune responses. In this study, we use chitosan microparticles to deliver multiple antigenic epitopes from GRA10 (G10E), containing three dominant epitopes. When G10E was entrapped within chitosan microparticles (G10E-CS), adequate peptides for eliciting immune response were loaded in the microsphere core and this complex released G10E peptides stably. The efficiency of G10E-CS was detected both in vitro, via cell culture, and through in vivo mouse immunization. In vitro, G10E-CS activated Dendritic Cells (DC) and T lymphocytes by upregulating the secretion of costimulatory molecules (CD40 and CD86). In vivo, Th1 biased cellular and humoral immune responses were activated in mice vaccinated with G10E-CS, accompanied by significantly increased production of IFN-γ, IL-2, and IgG, and decreases in IL-4, IL-10, and IgG1. Immunization with G10E-CS conferred significant protection with prolonged survival in mice model of acute toxoplasmosis and statistically significant decreases in cyst burden in murine chronic toxoplasmosis. The results from this study indicate that chitosan microspheres used as an effective system to deliver a linked antigenic peptides is a promising strategy for the development of efficient vaccine against T. gondii.

Microparticles, microcapsules and microspheres: A review of recent developments and prospects for oral delivery of insulin

Diabetes mellitus is a chronic metabolic health disease affecting the homeostasis of blood sugar levels. However, subcutaneous injection of insulin can lead to patient non-compliance, discomfort, pain and local infection. Sub-micron sized drug delivery systems have gained attention in oral delivery of insulin for diabetes treatment. In most of the recent literature, the terms "microparticles" and "nanoparticle" refer to particles where the dimensions of the particle are measured in micrometers and nanometers respectively. For instance, insulin-loaded particles are defined as microparticles with size larger than 1 μm by most of the research groups. The size difference between nanoparticles and microparticles proffers numerous effects on the drug loading efficiency, aggregation, permeability across the biological membranes, cell entry and tissue retention. For instance, microparticulate drug delivery systems have demonstrated a number of advantages including protective effect against enzymatic degradation, enhancement of peptide stability, site-specific and controlled drug release. Compared to nanoparticulate drug delivery systems, microparticulate formulations can facilitate oral absorption of insulin by paracellular, transcellular and lymphatic routes. In this article, we review the current status of microparticles, microcapsules and microspheres for oral administration of insulin. A number of novel techniques including layer-by-layer coating, self-polymerisation of shell, nanocomposite microparticulate drug delivery system seem to be promising for enhancing the oral bioavailability of insulin. This review draws several conclusions for future directions and challenges to be addressed for optimising the properties of microparticulate drug formulations and enhancing their hypoglycaemic effects.

Binary and Tertiary Complex Based on Short-Chain Glucan and Proanthocyanidins for Oral Insulin Delivery

The present study was performed to investigate binary and tertiary nanocomposites between short-chain glucan (SCG) and proanthocyanidins (PAC) for the oral delivery of insulin. There was a large decrease in fluorescence intensity of insulin in the presence of SCG or the combination of SCG with PAC. Fourier transform infrared spectroscopy revealed that the binary and tertiary nanocomposites were synthesized due to the hydrogen bonding and hydrophobic interactions. The insulin entrapped in the nanocomposites was in an amorphous state confirmed by X-ray diffraction. The cell culture demonstrated that both the nanocomposites showed no detectable cytotoxicity with relative cell viability all above 85%. The pharmacological bioavailability after oral administration of insulin-SCG-PAC at a dose of 100 IU/kg was found to be 6.98 ± 1.20% in diabetic rats without any sharp fluctuations in 8 h.

Chitosan-starch beads prepared by ionotropic gelation as potential matrices for controlled release of fertilizers

The present study examines the agrochemical application of macrospheres prepared with chitosan and chitosan-starch blends by an easy dripping technique, using a sodium tripolyphosphate aqueous solution as the crosslinking agent. These biopolymers form hydrogels that could be a viable alternative method to obtain controlled-release fertilizers (CRFs). Three different concentrations (ranging from 20 to 100wt/wt% of chitosan) and two crosslinking times (2 or 4h) were used. The resulting polymeric matrices were examined by scanning electron microscopy coupled with energy dispersive X-ray, X-ray diffraction, Fourier transform infrared spectroscopy, solid-state nuclear magnetic resonance, thermogravimetric analysis and differential scanning calorimetry. Ionotropic gelation and neutralization induced the formation of the macrospheres. The crosslinking time and the composition of the polymeric hydrogel controlled the crosslinking degree, the swelling behavior and the fertilizer loading capability. Potassium nitrate-loaded beads were shown to be useful as a controlled-release fertilizer. After 14days of continuous release into distilled water, the cumulative concentration in the release medium reached between 70 and 93% of the initially loaded salt, depending on the matrix used. The prepared beads showed properties that make them suitable for use in the agrochemical industry as CRFs.

Chitosan-clodronate nanoparticles loaded in poloxamer gel for intra-articular administration

This work was based on the study of an intra-articular delivery system constituted by a poloxamer gel vehiculating clodronate in chitosan nanoparticles. This system has been conceived to obtain a specific and controlled release of clodronate in the joints to reduce the arthritis rheumatoid degenerative effect. Clodronate (CLO) is a first-generation bisphosphonate with anti-inflammatory properties, inhibiting the cytokine and NO secretion from macrophages, therefore causing apoptosis in these cells. This is related to its ability to be metabolized by cells and converted into a cytotoxic intermediate as a non-hydrolysable analogue of ATP. Chitosan (CHI) was used to develop nanosystems, by ionotropic gelation induced by clodronate itself. A fractional factorial experimental design allowed us to obtain nanoparticles, the diameter of which ranged from 200 to 300nm. Glutaraldehyde was used to increase nanoparticle stability and modify the drug release profile. The zeta potential value of crosslinked nanopaparticles was 21.0mV±1.3, while drug loading was 31.0%±5.4 w/w; nanoparticle yield was 18.2%±1.8 w/w, the encapsulation efficiency was 48.8%±9.9 w/w. Nanoparticles were homogenously loaded in a poloxamer sol, and the drug delivery system is produced in-situ after local administration, when sol become gel at physiological temperature. The properties of poloxamer gels containing CHI-CLO nanoparticles, such as viscosity, gelation temperature and drug release properties, were evaluated. In vitro studies were conducted to evaluate the effects of these nanoparticles on a human monocytic cell line (THP1). The results showed that this drug delivery system is more efficient, with respect to the free drug, to counteract the inflammatory process characteristic of several degenerative diseases.

Facile preparation of biphasic-induced magnetic icariin-loaded composite microcapsules by automated in situ click technology

This research aims to prepare the biphasic-induced magnetic composite microcapsules (BIMCM) as a promising environmental stimuli-responsive delivery vehicle to dispose the problem of drug burst effect. The paper presented a novel automated in situ click technology of magnetic chitosan/nano hydroxyapatite (CS/nHA) microcapsules. Fe3O4 magnetic nanoparticles (MNP) and nHA were simultaneously in situ crystallized by one-step process. Icariin (ICA), a plant-derived flavonol glycoside, was combined to study drug release properties of BIMCM. BIMCM were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Thermal gravimetric analysis/Differential Scanning Calorimetry(TGA/DSC) in order to reveal their component and surface morphology as well as the role of the in situ generated Fe3O4 MNP and nHA. The magnetic test showed the BIMCM were super-paramagnetic. Both in situ generated Fe3O4 MNP and nHA serve as stable inorganic crosslinkers in BIMCM to form many intermolecular crosslinkages for the movability of the CS chains. This makes ICA loaded microcapsules take on a sustained release behavior and results in the self-adjusting of surface morphology, decreasing of swelling and degradation rates. In addition, in vitro tests were systematically carried out to examine the biocompatibility of the microcapsules by MTT test, Wright-Giemsa dying assay and AO/EB fluorescent staining method. These results demonstrated that successful introduction of the in situ click Fe3O4 MNP provided an alternative strategy because of magnetic sensitivity and sustained release. As such, the novel ICA loaded biphasic-induced magnetic CS/nHA/MNP microcapsules are expected to find potential applications in drug delivery system for bone repair.

A review of biodegradable polymeric systems for oral insulin delivery

Currently, repeated routine subcutaneous injections of insulin are the standard treatment for insulin-dependent diabetic patients. However, patients' poor compliance for injections often fails to achieve the stable concentration of blood glucose. As a protein drug, the oral bioavailability of insulin is low due to many physiological reasons. Several carriers, such as macromolecules and liposomes have been used to deliver drugs in vivo. In this review article, the gastrointestinal barriers of oral insulin administration are described. Strategies for increasing the bioavailability of oral insulin, such absorption enhancers, enzyme inhibitors, enteric coatings are also introduced. The potential absorption mechanisms of insulin-loaded nanoparticles across the intestinal epithelium, including intestinal lymphatic route, transcellular route and paracellular route are discussed in this review. Natural polymers, such as chitosan and its derivates, alginate derivatives, γ-PGA-based materials and starch-based nanoparticles have been exploited for oral insulin delivery; synthetic polymers, such as PLGA, PLA, PCL and PEA have also been developed for oral administration of insulin. This review focuses on recent advances in using biodegradable natural and synthetic polymers for oral insulin delivery along with their future prospects.

Preparation and characterization of vanillin-crosslinked chitosan therapeutic bioactive microcarriers

Chitosan microspheres with diameter of 14.3-48.5 μm were prepared by emulsion method and using natural vanillin as cross-linking agent. The surface morphology and microstructure of the microspheres were characterized by scanning electron microscopy, X-ray diffraction and Fourier-transform infrared spectroscopy, etc. The hollow microspheres showed a well-defined spherical shape with median diameter of 30.3 μm and possessed a uniform surface with micro-wrinkles, which is in favor of the drug release. Interpenetrating network cross-linking mechanism might result from the Schiff base reaction and the acetalization of hydroxyl and carbonyl between chitosan and vanillin. Berberine, as a model drug, was loaded in the microspheres and released in a sustainable manner. The drug loading ratio could change from 9.16% to 29.70% corresponding to the entrapment efficiency of 91.61% to 74.25%. In vitro cell culture study using MG63 cells and in vivo implantation clearly showed that the microspheres could provide favorable cell attachment and biocompatibility. The results confirm that the drug-loaded vanillin-crosslinked chitosan microspheres could be a worthy candidate either as carriers of drugs and cells, or as therapeutic matrix for bone repair and regeneration.

Enhanced insulin absorption from sublingual microemulsions: effect of permeation enhancers

Microemulsions of insulin (50 IU/mL) comprising permeation enhancers were formulated for sublingual delivery. Circular dichroism (CD) spectra indicated conformational stability, while chemical stability was confirmed by high-performance liquid chromatography (HPLC). CD spectra of insulin in combination with permeation enhancers revealed attenuation of molar ellipticity at 274 nm in the order TCTP > TC-AOT > TC > TC-NMT > Sol P > insulin solution. The molar ellipticity ratios at 208/222 nm confirmed dissociation of insulin in the microemulsions with the same rank order. Matrix-assisted laser diffraction ionization mass spectra (MALDI) revealed a significant shift in intensity signals towards monomer and dimers with a substantially high ratio of monomers, especially in the presence of the TCTP and TC-AOT. Permeation through porcine sublingual mucosa correlated with the dissociation data. A high correlation between the ratio of molar ellipticity at 208/222 nm and serum glucose levels (r (2) > 0.958) and serum insulin levels (r (2) > 0.952) strongly suggests the role of dissociation of insulin on enhanced absorption. While all microemulsions revealed a reduction in serum glucose levels and increase in serum insulin levels, significant differences were observed with the TCTP and TC-AOT microemulsions. High pharmacological availability >60 % and bioavailability >55 % compared to subcutaneous insulin at a low dose of 2 IU/kg appears highly promising. The data clearly suggests the additional role of the permeation enhancers on dissociation of insulin on enhanced sublingual absorption from the microemulsions.

Preparation and application of bacteriophage-loaded chitosan microspheres for controlling Lactobacillus plantarum contamination in bioethanol fermentation

The bacteriophage-loaded chitosan microspheres can effectively controlL. plantarumcontamination in bioethanol fermentation. Moreover, sustained release of bacteriophage would enhance the effect of bacteriophage through prolonging the action time.