Distribution and deposition of respirable PLGA microspheres in lung alveoli

Characteristics of fine and ultrafine aerosols in the London underground

Underground railway systems are recognised spaces of increased personal pollution exposure. We studied the number-size distribution and physico-chemical characteristics of ultrafine (PM_0.1), fine (PM_0.1-2.5) and coarse (PM_2.5-10) particles collected on a London underground platform. Particle number concentrations gradually increased throughout the day, with a maximum concentration between 18:00 h and 21:00 h (local time). There was a maximum decrease in mass for the PM_2.5, PM_2.5-10 and black carbon of 3.9, 4.5 and ~ 21-times, respectively, between operable (OpHrs) and non-operable (N-OpHrs) hours. Average PM₁₀ (52 μg m^-3) and PM_2.5 (34 μg m^-3) concentrations over the full data showed levels above the World Health Organization Air Quality Guidelines. Respiratory deposition doses of particle number and mass concentrations were calculated and found to be two- and four-times higher during OpHrs compared with N-OpHrs, reflecting events such as train arrival/departure during OpHrs. Organic compounds were composed of aromatic hydrocarbons and polycyclic aromatic hydrocarbons (PAHs) which are known to be harmful to health. Specific ratios of PAHs were identified for underground transport that may reflect an interaction between PAHs and fine particles. Scanning transmission electron microscopy (STEM) chemical maps of fine and ultrafine fractions show they are composed of Fe and O in the form of magnetite and nanosized mixtures of metals including Cr, Al, Ni and Mn. These findings, and the low air change rate (0.17 to 0.46 h^-1), highlight the need to improve the ventilation conditions.

Cationic inhalable particles for enhanced drug delivery to M. tuberculosis infected macrophages

Inhalable microparticle-based drug delivery platforms are being investigated extensively for Tuberculosis (TB) treatment as they offer efficient deposition in lungs and improved pharmacokinetics of the encapsulated cargo. However, the effect of physical parameters of microcarriers on interaction with Mycobacterium tuberculosis (Mtb) infected mammalian cells is underexplored. In this study, we report that Mtb-infected macrophages are highly phagocytic and microparticle surface charge plays a major role in particle internalization by infected cells. Microparticles of different sizes (0.5-2 μm) were internalized in large numbers by Mtb-infected THP-1 macrophages and murine primary Bone Marrow Derived Macrophages in vitro. Drastic improvement in particle uptake was observed with cationic particles in vitro and in mice lungs. Rapid uptake of rifampicin-loaded cationic microparticles allowed high intracellular accumulation of the drug and led to enhanced anti-bacterial function when compared to non-modified rifampicin-loaded microparticles. Cytocompatibility assay and histological analysis in vivo confirmed that the formulations were safe and did not elicit any adverse reaction. Additionally, pulmonary delivery of cationic particles in mice resulted in two-fold higher uptake in resident alveolar macrophages compared to non-modified particles. This study provides a framework for future design of drug carriers to improve delivery of anti-TB drugs inside Mtb-infected cells.

Uniformity and Efficacy of Dry Powders Delivered to the Lungs of a Mycobacterial-Surrogate Rat Model of Tuberculosis

Purpose

Pulmonary administration of dry drug powder is a considered promising strategy in the treatment of various lung diseases such as tuberculosis and is more effective than systemic medication. However, in the pre-clinical study phase, there is a lack of devices for effective delivery of dry powders to the lungs of small rodents. In this study, an administration device which utilizes Venturi effect to deliver dry powders to the lungs homogeneously was developed.

Methods

A Venturi-effect administration device which synchronizes with breathes by use of a ventilator and aerosolizes the dry powders was created. Pulmonary distribution of inhalable dry powders prepared by spray-drying poly(lactic-co-glycolic) acid and an antituberculosis agent rifampicin and anti-tuberculosis effect of the powders on mycobacteria infected rats by administration with the Venturi-effect administration device and a conventional insufflation device were evaluated.

Results

Homogeneous distribution of the dry powders in the lung was achieved by the Venturi-effect administration device due to efficient and recurring aerosolization of loaded dry powders while synchronizing with breathes. Amount of rifampicin delivered to the lungs by the Venturi-effect administration device was three times higher than that by a conventional insufflation device, demonstrating three times greater antimycobacterial activity.

Conclusions

The Venturi-effect administration device aerosolized inhalable antituberculosis dry powders efficiently, achieved uniform pulmonary distribution, and aided the dry powders to exert antituberculosis activity on lung-residing mycobacteria.

Effects of lower alcohols on nanocomposite particles for inhalation prepared using O/W emulsion

BACKGROUND

Inhalable nanocomposite particles using O/W emulsions were studied. The effect of the composition of the dispersed phase on the nanoparticles in the nanocomposite particles was reported, however, the effect on the inhalation characteristics of nanocomposite particles has not been investigated.

OBJECTIVE

The aim of this study was to study the effects of lower alcohols in the dispersed phase of O/W emulsions on inhalable nanocomposite particles.

METHODS

Nanocomposite particles were prepared using a spray dryer from O/W emulsion. A mixed solution of dichloromethane and lower alcohols in which rifampicin (RFP) and poly(L-lactide-co-glycolide) were dissolved was used as a dispersed phase, and an aqueous solution in which arginine and leucine were dissolved was used as a continuous phase.

RESULTS

We succeeded in preparing non-spherical nanocomposite particles with an average diameter of 9.01-10.91 μm. The results of the fine particle fraction (FPF) measurement showed that the higher the hydrophobicity of the lower alcohol mixed in the dispersed phase, the higher the FPF value. The FPF value of the nanocomposite particles was significantly increased by using ethanol and 1-propanol.

CONCLUSIONS

The results were revealed that mixing 1-propanol with the dispersed phase increased the amount of RFP delivered to the lungs.

One Size Fits All? Not in In Vivo Modeling of Tuberculosis Chemotherapeutics

Tuberculosis (TB) remains a global health problem despite almost universal efforts to provide patients with highly effective chemotherapy, in part, because many infected individuals are not diagnosed and treated, others do not complete treatment, and a small proportion harbor Mycobacterium tuberculosis (Mtb) strains that have become resistant to drugs in the standard regimen. Development and approval of new drugs for TB have accelerated in the last 10 years, but more drugs are needed due to both Mtb's development of resistance and the desire to shorten therapy to 4 months or less. The drug development process needs predictive animal models that recapitulate the complex pathology and bacterial burden distribution of human disease. The human host response to pulmonary infection with Mtb is granulomatous inflammation usually resulting in contained lesions and limited bacterial replication. In those who develop progressive or active disease, regions of necrosis and cavitation can develop leading to lasting lung damage and possible death. This review describes the major vertebrate animal models used in evaluating compound activity against Mtb and the disease presentation that develops. Each of the models, including the zebrafish, various mice, guinea pigs, rabbits, and non-human primates provides data on number of Mtb bacteria and pathology resolution. The models where individual lesions can be dissected from the tissue or sampled can also provide data on lesion-specific bacterial loads and lesion-specific drug concentrations. With the inclusion of medical imaging, a compound's effect on resolution of pathology within individual lesions and animals can also be determined over time. Incorporation of measurement of drug exposure and drug distribution within animals and their tissues is important for choosing the best compounds to push toward the clinic and to the development of better regimens. We review the practical aspects of each model and the advantages and limitations of each in order to promote choosing a rational combination of them for a compound's development.

Modulating lung immune cells by pulmonary delivery of antigen-specific nanoparticles to treat autoimmune disease

Antigen-specific particles can treat autoimmunity, and pulmonary delivery may provide for easier delivery than intravenous or subcutaneous routes. The lung is a "hub" for autoimmunity where autoreactive T cells pass before arriving at disease sites. Here, we report that targeting lung antigen-presenting cells (APCs) via antigen-loaded poly(lactide-co-glycolide) particles modulates lung CD4⁺ T cells to tolerize murine experimental autoimmune encephalomyelitis (EAE), a mouse model of multiple sclerosis. Particles directly delivered to the lung via intratracheal administration demonstrated more substantial reduction in EAE severity when compared with particles delivered to the liver and spleen via intravenous administration. Intratracheally delivered particles were associated with lung APCs and decreased costimulatory molecule expression on the APCs, which inhibited CD4⁺ T cell proliferation and reduced their population in the central nervous system while increasing them in the lung. This study supports noninvasive pulmonary particle delivery, such as inhalable administration, to treat autoimmune disease.

Evolution of rifampicin treatment for tuberculosis

Rifampicin was discovered in 1965 and remains one of the most important drugs in tuberculosis treatment that is valued for its sterilizing activity and ability to shorten treatment. Antimicrobial activity of rifampicin was initially proved in vitro; subsequently numerous in vivo studies showed the bactericidal properties and dose-dependent effect of rifampicin. Rifampicin was first during the late 1960s to treat patients suffering from chronic drug-resistant pulmonary TB. Decades later, rifampicin continues to be studied with particular emphasis on whether higher doses could shorten the duration of treatment without increasing relapse or having adverse effects. Lesion-specific drug penetration and pharmacokinetics of rifampicin are improving our understanding of effective concentration while potentially refining drug regimen designs. Another prospective aspect of high-dose rifampicin is its potential use in treating discrepant mutation thereby eliminating the need for MDR treatment. To date, several clinical trials have shown the safety, efficacy, and tolerability of high-dose rifampicin. Currently, high-dose rifampicin has been used successfully in a routine clinical setting for the treatment of high-risk patients. However, the WHO and other relevant policy makers have not committed to implementing a controlled rollout thereof. This review describes the course that rifampicin has travelled to the present-day exploration of high-dose rifampicin treatment.

Exploring inhalable polymeric dry powders for anti-tuberculosis drug delivery

The growing interest on polymeric delivery systems for pulmonary administration of drugs anticipates a more direct and efficient treatment of diseases such as tuberculosis (TB) that uses the pulmonary route as the natural route of infection. Polymeric microparticles or nano-in-microparticles offer target delivery of drugs to the lungs and the potential to control and sustain drug release within TB infected macrophages improving the efficiency of the anti-TB treatment and reducing side effects. In a dry powder form these inhalable delivery systems have increased stability and prolonged storage time without requiring refrigeration, besides being cost-effective and patient convenient. Thus, this review aims to compile the recent innovations of inhalable polymeric dry powder systems for the delivery of anti-TB drugs exploring the methods of production, aerodynamic characterization and the efficacy of targeted drug delivery systems using in vitro and in vivo models of the disease. Advanced knowledge and promising outcomes of these systems are anticipated to simplify and revolutionize the pulmonary drug delivery and to contribute towards more effective anti-TB treatments.

Considerations in preparing for clinical studies of inhaled rifampicin to enhance tuberculosis treatment

Drug delivery via the inhaled route has advantages for treating local and systemic diseases. Pulmonary drug delivery may have potential in treating tuberculosis (TB), which is mainly localised in the lung (pulmonary tuberculosis ∼75%) while also affecting other organs (extra-pulmonary tuberculosis). Currently, rifampicin, a first-line anti-tubercular drug, is given orally and the maximum daily oral dose is the lesser of 10 mg/kg or 600 mg. Since only a small fraction of this dose is available in the lung, concentrations may frequently fail to reach bactericidal levels, and therefore, contribute to the development of multi-drug resistant pulmonary TB. Pulmonary delivery of rifampicin, either alone or in addition to the standard oral dose, has the potential to achieve a high concentration of rifampicin in the lung at a relatively low administered dose that is sufficient to kill bacteria and reduce the development of drug resistance. As yet, no clinical study in humans has reported the pharmacokinetics or the efficacy of pulmonary delivery of rifampicin for TB. This review discusses the opportunities and challenges of rifampicin delivery via the inhaled route and important considerations for future clinical studies on high dose inhaled rifampicin are illustrated.

Precision-guided long-acting analgesia by Gel-immobilized bupivacaine-loaded microsphere

Peripheral nerve blockade (PNB) is a conventional strategy for the management of acute postoperative pain. However, the short duration of the associated analgesia and the potential systemic toxicity due to the low molecular weights of local anesthetics limit their application. Methods: An in situ forming injectable Gel-microsphere (Gel-MS) system consisting of PLGA-PEG-PLGA Gel (Gel) and Gel-immobilized bupivacaine-loaded microsphere (MS/BUP) was prepared for precision-guided long-acting analgesia. A series of in vitro characterizations, such as scanning electron microscopy, rheology analysis, confocal laser scanning microscopy, drug release, and erosion and degradation, were carried out. After that, the in vivo analgesia effect of the Gel-MS system, the immobilization effect of Gel on the MS, and biocompatibility of the system were evaluated using a sciatic nerve block model. Results: The BUP release from the Gel-MS system was regulated by both the inner MS and the outer Gel matrix, demonstrating sustained BUP release in vitro for several days without an initial burst release. More importantly, incorporation of the Gel immobilized the MS and hindered the diffusion of MS from the injection site because of its in situ property, which contributed to a high local drug concentration and prevented systemic side effects. In vivo, a single injection of Gel-MS/BUP allowed rats to maintain sensory and motor blockade significantly longer than treatment with MS/BUP (P < 0.01) or BUP-loaded Gel (Gel-BUP, P < 0.01). Histopathological results demonstrated the excellent biodegradability and biocompatibility of the Gel-MS system without neurotoxicity. Conclusion: This precision-guided long-acting analgesia, which provides an in situ and sustained release of BUP, is a promising strategy for long-acting analgesia, and could represent a potential alternative for clinical pain management.

Sharpening nature's tools for efficient tuberculosis control: A review of the potential role and development of host-directed therapies and strategies for targeted respiratory delivery

Centuries since it was first described, tuberculosis (TB) remains a significant global public health issue. Despite ongoing holistic measures implemented by health authorities and a number of new oral treatments reaching the market, there is still a need for an advanced, efficient TB treatment. An adjunctive, host-directed therapy designed to enhance endogenous pathways and hence compliment current regimens could be the answer. The integration of drug repurposing, including synthetic and naturally occurring compounds, with a targeted drug delivery platform is an attractive development option. In order for a new anti-tubercular treatment to be produced in a timely manner, a multidisciplinary approach should be taken from the outset including stakeholders from academia, the pharmaceutical industry, and regulatory bodies keeping the patient as the key focus. Pre-clinical considerations for the development of a targeted host-directed therapy are discussed here.

Inhaled drug treatment for tuberculosis: Past progress and future prospects

Since the 1990s the rising incidence of multiple drug resistant TB, particularly in the context of human immunodeficiency virus co-infected patients, has threatened global TB control. At that time funding agencies began to support formal investigation of aerosol therapy which until then had been the subject of case reports of individual investigators. Over the last decade, proponents of aerosol therapy have increased in number within the TB research community as the incidence of multiple and extremely drug resistant TB has increased dramatically around the world. Aerosol therapy offers the potential to deliver drug at target concentrations directly into the lungs, use the alveolar-capillary interface to achieve systemic levels, while reducing the risk of systemic toxicity seen with parentally administered doses. In addition, there are insufficient new drugs in the pipeline to anticipate the appearance of a new regimen in time to assure future control of drug resistance. Consequently, alternative strategies are critical to achieving global TB control, and inhaled therapies should be considered as one such strategy.

Nano- and micro-based inhaled drug delivery systems for targeting alveolar macrophages

INTRODUCTION

Macrophages are the most versatile cells in the hematopoietic system and are strategically distributed in tissues to fight pathogens or other foreign particles. In the lung, however, for intracellular infections such as tuberculosis, pneumonia and aspergillosis, bacteria and fungi utilize the alveolar macrophage as a breeding ground. This has become a challenge for the treatment of these infections, as most drugs do not effectively reach the macrophages at therapeutic levels. Alveolar macrophages also play an important role to initiative adaptive immunity toward combating inflammation and cancer in the lung.

AREAS COVERED

This review focuses on the development of micro- and nanotechnology-based drug delivery systems to target alveolar macrophages in association with intracellular infections, cancer and lung inflammation. Aspects of nanoparticle and micron-sized particle engineering through exploitation of particles' physicochemical characteristics such as particle size, surface charge and geometry of particles are discussed. In addition, the application of nanocarriers such as liposomes, polymeric nanoparticles and dendrimers are covered with respect to macrophage targeting.

EXPERT OPINION

Drug delivery targeted to alveolar macrophages in the lung is becoming a reality thanks to micro- and nanotechnology breakthrough. The literature review shows that regulation of physicochemical parameters of particles could be a recipe to enhance macrophage targeting and uptake. However, there is still a need to identify more target-specific receptors in order to facilitate drug targeting. Besides that, the toxicity of nanocarriers arising from prolonged residence in the lung should be taken into consideration during formulation.

Albuminated PLGA nanoparticles containing bevacizumab intended for ocular neovascularization treatment

Bevacizumab, an anti-VEGF antibody, has demonstrated trustworthy effects in treatment of retinal and choroidal neovascularization that both are crucial sight threatening conditions. However, the weak point is the short half-life of the drug in vitreous which necessitates frequent intravitreal injections. Accordingly employing controlled-release drug delivery systems such as polymeric nanoparticles (NPs) has been suggested. In this study albuminated-PLGA-NPs containing bevacizumab were prepared and studied intended for reducing the number of injections. NPs were formulated by double-emulsion method and a single dose of NPs was intravitreally injected to rabbits. The drug concentrations in vitreous and aqueous humor were assayed in different time intervals using ELISA and intraocular pharmacokinetic parameters were calculated. Moreover, coumarin-6 loaded albuminated-PLGA-NPs were employed to evaluate the distribution and persistence of the NPs in the posterior segment. Results revealed that the bevacizumab vitreous concentration maintained above 500 ng mL(-1) for about 8 weeks and 3.3 times elevation was observed in the drug vitreous MRT compared with the control. According to coumarin-6 NP tests, fluorescence emissions in posterior tissues were observed for 56 days which confirmed the nanoparticles persistence in ocular tissues during the test span. Therefore our prepared formulation may offer improvements in treatment of eye posterior segment neovascularization.

Role of size of drug delivery carriers for pulmonary and intravenous administration with emphasis on cancer therapeutics and lung-targeted drug delivery

The design of a drug delivery system and the fabrication of efficient, successful, and targeted drug carriers are two separate issues that require slightly different design parameters.