Effects of calcium ions on titanium surfaces for bone regeneration

Effect of bioceramic powder abrasion on different implant surfaces

PURPOSE

Bioceramic coatings have been shown to promote bone repair, which aids in the early integration of implants. This study aimed to evaluate the influence of air abrasion with a bioceramic abrasive on the surface characteristics of different implant materials and surfaces. The dissolution of the applied treatment from the surfaces over 3 weeks was also assessed.

MATERIALS AND METHODS

Discs of three alloys used for dental implants were studied and compared: two types of commercially pure titanium (CpTi)/ (CpTi SLActive) and titanium-zirconia (TiZr). The tested surfaces were: CpTi control (CpC), sandblasted (SB), sandblasted and acid-etched (SBE), and CpTi SLActive®, (TiZr) Roxolid®. Three discs from each group underwent air abrasion with apatite bioceramic powders, 95% hydroxyapatite (HA)/5% calcium oxide (CaO), and 90% hydroxyapatite (HA)/10% calcium oxide (CaO). The treated discs were surface characterized by optical profilometry to obtain surface roughness, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) to compare element weight percentages of titanium, calcium, and phosphate. Dissolution was assessed using inductively coupled plasma optic emission spectrometry (ICP-OES).

RESULTS

Bioceramic powders were deposited on all tested surfaces leading to changes in surface characteristics. The only statistically significant differences between the material groups for surface roughness were found with 95% HA/5% CaO powder in the Sp and Rp parameters (p = 0.03 and 0.04, respectively). There were no significant differences in the Ca and P wt% between all groups and powders 95% HA/5% CaO and 90% HA/10% CaO (p = 0.14, 0.18, and p = 0.15, 0.12, respectively). A non-uniform dispersion of the treatment on the surface layer was visible on all treated surfaces. The bioceramic powder continued to dissolute from the tested surfaces for 3 weeks.

CONCLUSION

Bioceramic abrasion modifies implant surface characteristics, although the change in surface characteristics resulting from such treatment was not influenced by the implant material or surface treatment. Air abrasion with hydroxyapatite and calcium oxide bioceramics leaves powder deposits on the treated implant surfaces that could potentially influence the healing of implants affected by peri-implantitis.

Enhancing the correlation between in vitro and in vivo experiments in dental implant osseointegration: investigating the role of Ca ions

This study delves into the osteogenic potential of a calcium-ion modified titanium implant surface, unicCa, employing state-of-the-art proteomics techniques both in vitro (utilizing osteoblasts and macrophage cell cultures) and in vivo (in a rabbit condyle model). When human osteoblasts (Hobs) were cultured on unicCa surfaces, they displayed a marked improvement in cell adhesion and differentiation compared to their unmodified counterparts. The proteomic analysis also revealed enrichment in functions associated with cell migration, adhesion, extracellular matrix organization, and proliferation. The analysis also underscored the involvement of key signalling pathways such as PI3K-Akt and mTOR. In the presence of macrophages, unicCa initially exhibited improvement in immune-related functions and calcium channel activities at the outset (1 day), gradually tapering off over time (3 days). Following a 5-day implantation in rabbits, unicCa demonstrated distinctive protein expression profiles compared to unmodified surfaces. The proteomic analysis highlighted shifts in adhesion, immune response, and bone healing-related proteins. unicCa appeared to influence the coagulation cascade and immune regulatory proteins within the implant site. In summary, this study provides a comprehensive proteomic analysis of the unicCa surface, drawing correlations between in vitro and in vivo results. It emphasizes the considerable potential of unicCa surfaces in enhancing osteogenic behavior and immunomodulation. These findings significantly contribute to our understanding of the intricate molecular mechanisms governing the interplay between biomaterials and bone cells, thereby facilitating the development of improved implant surfaces for applications in bone tissue engineering.

Metal ions: the unfading stars of bone regeneration-from bone metabolism regulation to biomaterial applications

In recent years, bone regeneration has emerged as a remarkable field that offers promising guidance for treating bone-related diseases, such as bone defects, bone infections, and osteosarcoma. Among various bone regeneration approaches, the metal ion-based strategy has surfaced as a prospective candidate approach owing to the extensive regulatory role of metal ions in bone metabolism and the diversity of corresponding delivery strategies. Various metal ions can promote bone regeneration through three primary strategies: balancing the effects of osteoblasts and osteoclasts, regulating the immune microenvironment, and promoting bone angiogenesis. In the meantime, the complex molecular mechanisms behind these strategies are being consistently explored. Moreover, the accelerated development of biomaterials broadens the prospect of metal ions applied to bone regeneration. This review highlights the potential of metal ions for bone regeneration and their underlying mechanisms. We propose that future investigations focus on refining the clinical utilization of metal ions using both mechanistic inquiry and materials engineering to bolster the clinical effectiveness of metal ion-based approaches for bone regeneration.

Sandblasted/Acid-Etched Titanium Surface Modified with Calcium Phytate Enhances Bone Regeneration in a High-Glucose Microenvironment by Regulating Reactive Oxygen Species and Cell Senescence

Hyperglycemia in patients with diabetes affect osteoblast function, leading to abnormal bone metabolism and implant failure. Adequate bone volume surrounding an implant is essential for osseointegration, which can be improved by implant surface modifications. In this study, titanium surfaces were hydrothermally treated with a mixture of phytic acid (PA) and calcium hydroxide to produce a calcium-decorated surface. The control group comprised pure titanium with a sandblasted/acid-etched (SLA) surface. The elemental composition, hydrophilicity, surface roughness, and morphology of the titanium surfaces were examined. Evaluation of in vitro osteogenic differentiation ability in a high-glucose environment using alkaline phosphatase (ALP) staining, ALP activity assays, Alizarin Red S staining, quantitative reverse transcription-polymerase chain reaction (qRT-PCR), and immunofluorescence staining revealed that Ca-PA-modified SLA titanium surfaces can promote osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs). Evaluation of oxidative stress and aging using reactive oxygen species (ROS), malondialdehyde (MDA), superoxide dismutase (SOD), and β-galactosidase staining revealed that Ca-PA-modified SLA titanium surfaces can reduce ROS production and ameliorate oxidative stress damage in hBMSCs. In vivo assessment of osteogenesis in a diabetic rat model revealed that Ca-PA coating promotes peri-implant osseointegration. Ca-PA-modified SLA titanium surface is a candidate for improving implant osseointegration in patients with diabetes.

A Bioinspired Gelatin-Amorphous Calcium Phosphate Coating on Titanium Implant for Bone Regeneration

Biocompatible and bio-active coatings can enhance and accelerate osseointegration via chemical binding onto substrates. Amorphous calcium phosphate (ACP) has been shown as a precursor to achieve mineralization in vertebrates and invertebrates under the control of biological macromolecules. This work presents a simple bioinspired Gelatin-CaPO4 (Gel-CaP) composite coating on titanium surfaces to improve osseointegration. The covalently bound Gel-CaP composite is characterized as an ACP-Gel compound via SEM, FT-IR, XRD, and HR-TEM. The amorphous compound coating exhibits a nanometer range thickness and improved elastic modulus, good wettability, and nanometric roughness. The amount of grafted carboxyl groups and theoretical thickness of the coatings are also investigated. More importantly, MC3T3 cells, an osteoblast cell line, show excellent cell proliferation and adhesion on the Gel-CaP coating. The level of osteogenic genes is considerably upregulated on Ti with Gel-CaP coatings compared to uncoated Ti, demonstrating that Gel-CaP coatings possess a unique osteogenic ability. To conclude, this work offers a new perspective on functional, bioactive titanium coatings, and Gel-CaP composites can be a low-cost and promising candidate in bone regeneration.

A Comparative Investigation of Chemical Decontamination Methods for In-Situ Cleaning of Dental Implant Surfaces

Surface chemistry evaluation is crucial in assessing the efficacy of chemical decontamination products for titanium implants. This study aimed to investigate the effectiveness of chemical decontamination solutions in cleaning a contaminated dental implant surface and to evaluate the potential of combining Pluronic gel with hydrogen peroxide (NuBone®Clean) by evaluating pellicle disruption and re-formation on implant surfaces. In addition, ensuring safety with in vitro and human testing protocols. X-ray Photoelectron Spectroscopy (XPS) was utilised for surface analysis. All the tested gels had some effect on the surface cleanness except for PrefGel®. Among the tested chemical decontamination candidates, NuBone®Clean demonstrated effectiveness in providing a cleaner titanium surface. Furthermore, none of the tested chemical agents exhibited cytotoxic effects, and the safety assessment showed no adverse events. The results of this study highlight the significance of conducting comprehensive evaluations, encompassing safety and efficacy, before introducing new chemical agents for dental treatments. The findings suggest that NuBone®Clean shows potential as a chemical decontamination solution for implant surfaces. However, further investigation through randomised clinical trials is necessary. By adhering to rigorous testing protocols, the development of safe and efficient chemical decontamination strategies can be advanced, benefiting patients and promoting progress in implant dentistry.

Biological properties of hydroxyapatite coatings on titanium dioxide nanotube surfaces using negative pressure method

Titanium (Ti) exhibits superior biocompatibility and mechanical properties but is bioinert, while hydroxyapatite (HA) possesses excellent osteogenesis and is widely used for the modification of Ti surface coatings. However, the synthesis of homogeneous and stable HA on metallic materials is still a major challenge. In this study, porous titanium dioxide nanotube arrays were prepared on Ti surface by anodic oxidation, loaded with calcium and phosphorus precursors by negative pressure immersion, and HA coating was formed by in situ crystallization of calcium and phosphorus on the surface by hydrothermal heating. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and bonding strength were conducted to confirm the surface characteristics of each group. The cell proliferation, mineralization degree, and alkaline phosphatase (ALP) activity of MC3T3-E1 cells on samples were calculated and compared in vitro experiments. Cylindrical samples were implanted into rat femurs to evaluate biocompatibility and osteogenesis in vivo. The results showed that HA crystals successfully synthesized in TiO₂ nanotubes, enhancing the bonding strength of HA coating and Ti substrate under negative pressure. Moreover, HA coating on Ti substrate remarkably enhanced cell proliferation and osteogenic differentiation activity in vitro, and improved new bone formation as well as osseointegration in vivo.

Provisional Matrix Formation at Implant Surfaces—The Bridging Role of Calcium Ions

The success of dental implants lies in their strong and lasting integration into the patient’s receiving bone. The first biological interactions at the implant surface determine the subsequent evolution of the integration process. In this study we set our objective to analyze the mechanistic interaction of the early regenerative matrix at implant surfaces modified with calcium ions (Ca) as compared to standard implant surfaces (NoCa). We put the surfaces in a Quartz Crystal Microbalance with Dissipation (QCM-D) to monitor the frequency shift (f) and the viscoelastic properties of the adsorbed biofilms and used Scanning Electron Microscopy (SEM) to visualize the resulting interfaces. Upon the addition of human blood plasma, Ca surfaces formed an adsorbed three-dimensional film attached to the surface (∆f = −40 Hz), while with NoCa, the biofilm formed but was not attached to the surface (∆f = 0 Hz). After 20 min in blood, two representative commercial implants with Ca and NoCa surfaces showed also distinct interfaces: Ca implants formed a visible clot attached to the implant which was composed mainly of platelets (Surface Coverage: 40 ± 20%) and some red blood cells (SC: 9 ± 3%) entrapped within a fibrin network (SC: 93 ± 5%). The NoCa implants were largely populated by red blood cells (SC: 67 ± 12%) with scarce fibrin remnants (SC: 3 ± 2%), and the implants showed no clot on their surfaces macroscopically. The pre-clinical and clinical results discussed in this work encourage the modification of titanium implant surfaces with calcium ions to improve the bone regenerative process. Taken together, these results add more information about the roles of Ca ions in bridging the formation of the provisional matrix at implant surfaces and their effects on implant osseointegration.

Fabrication of functional and nano-biocomposite scaffolds using strontium-doped bredigite nanoparticles/polycaprolactone/poly lactic acid via 3D printing for bone regeneration

Bone tissue engineering is a field to manufacture scaffolds for bone defects that cannot repair without medical interventions. Ceramic nanoparticles such as bredigite have importance roles in bone regeneration. We synthesized a novel strontium (Sr) doped bredigite (Bre) nanoparticles (BreSr) and then developed new nanocomposite scaffolds using polycaprolactone (PCL), poly lactic acid (PLA) by the 3D-printing technique. Novel functional nanoparticles were synthesized and characterized using field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and energy dispersive spectroscopy (EDS: map). The nanoparticles were uniformly distributed in the polymer matrix composites. The 3D- printed scaffolds were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflection-fourier transform infrared (ATR-FTIR), degradation rate porosity, mechanical tests, apatite formation and cell culture. Degradation rate and mechanical strength were increased in the PLA/PCL/Bre-5%Sr nanocopmposite scaffolds.. Hydroxyapatite crystals were also created on the scaffold surface in the bioactivity test. The scaffolds supported viability and proliferation of human osteoblasts. Gene expression and calcium deposition in the samples containing nanoparticles indicated statistical different than the scaffolds without nanoparticles. The nanocomposite scaffolds were implanted into the critical-sized calvarial defects in rat for 3 months. The scaffolds containing Bre-Sr ceramic nanoparticles exhibited the best potential to regenerate bone tissue.

A Narrative Review on the Effectiveness of Bone Regeneration Procedures with OsteoBiol® Collagenated Porcine Grafts: The Translational Research Experience over 20 Years

Over the years, several bone regeneration procedures have been proposed using natural (autografts, allografts, and xenografts) and synthetic (i.e., metals, ceramics, and polymers) bone grafts. In particular, numerous in vitro and human and animal in vivo studies have been focused on the discovery of innovative and suitable biomaterials for oral and maxillofacial applications in the treatment of severely atrophied jaws. On this basis, the main objective of the present narrative review was to investigate the efficacy of innovative collagenated porcine bone grafts (OsteoBiol^®, Tecnoss^®, Giaveno, Italy), designed to be as similar as possible to the autologous bone, in several bone regeneration procedures. The scientific publications were screened by means of electronic databases, such as PubMed, Scopus, and Embase, finally selecting only papers that dealt with bone substitutes and scaffolds for bone and soft tissue regeneration. A total of 201 papers have been detected, including in vitro, in vivo, and clinical studies. The effectiveness of over 20 years of translational research demonstrated that these specific porcine bone substitutes are safe and able to improve the biological response and the predictability of the regenerative protocols for the treatment of alveolar and maxillofacial defects.

Local Release of Strontium from Sputter-Deposited Coatings at Implants Increases the Strontium-to-Calcium Ratio in Peri-implant Bone

It is well known that strontium (Sr) has a significant effect on peri-implant bone healing when administered systemically. Due to the risk of adverse effects of such treatments, new routes focusing on the local, sustained release of Sr from bone-implant contact surfaces have been explored, with success in in vivo experiments. However, the increase of Sr concentrations in the peri-implant bone has not been described in depth yet. Here, we show that a local, sustained Sr release from Ti-Sr-O physical vapor deposition (PVD) coatings by magnetron sputter coating increases the Sr/Ca ratio close to the implant in a rabbit model and that the Sr/Ca background level is reached approximately 500 μm from the implant.

Protein adsorption/desorption dynamics on Ca-enriched titanium surfaces: biological implications

Calcium ions are used in the development of biomaterials for the promotion of coagulation, bone regeneration, and implant osseointegration. Upon implantation, the time-dependent release of calcium ions from titanium implant surfaces modifies the physicochemical characteristics at the implant-tissue interface and thus, the biological responses. The aim of this study is to examine how the dynamics of protein adsorption on these surfaces change over time. Titanium discs with and without Ca were incubated with human serum for 2 min, 180 min, and 960 min. The layer of proteins attached to the surface was characterised using nLC-MS/MS. The adsorption kinetics was different between materials, revealing an increased adsorption of proteins associated with coagulation and immune responses prior to Ca release. Implant-blood contact experiments confirmed the strong coagulatory effect for Ca surfaces. We employed primary human alveolar osteoblasts and THP-1 monocytes to study the osteogenic and inflammatory responses. In agreement with the proteomic results, Ca-enriched surfaces showed a significant initial inflammation that disappeared once the calcium was released. The distinct protein adsorption/desorption dynamics found in this work demonstrated to be useful to explain the differential biological responses between the titanium and Ca-ion modified implant surfaces.

Dental Implants with a Calcium Ions-Modified Surface and Platelet Concentrates for the Rehabilitation of Medically Compromised Patients: A Retrospective Study with 5-Year Follow-Up

Background: Platelet concentrates are biological, autologous products obtained from the patient’s whole blood, consisting of a supraphysiological concentration of platelets and growth factors, that have proved beneficial in different applications in the medical and dental fields. They are used in several medical and dental applications to enhance tissue healing. Previous evidence shows that platelet concentrates may be beneficial in patients with compromised systemic conditions, in which the healing process is impaired. Aim: To evaluate the 5-year clinical outcome of implant treatment using acid-etched implants with calcium ions-modified surface in association with plasma rich in growth factors, in patients with systemic diseases of a different nature. Methods: Charts of 99 medically compromised patients, who had received a total of 224 dental implants from January 2013 to June 2013, were retrospectively evaluated. Patients were divided into four groups, according to their condition: diabetes (n = 39 patients), osteoporosis (n = 36), lupus erythematosus systemic (n = 5), rheumatoid arthritis (n = 19). The main outcomes were implant survival, marginal bone level (MBL) change and complications throughout follow-up. Results: Mean follow-up was 63.06 ± 1.90 months (range 60.1 to 66.4 months). In total, eight implants failed in 6 diabetic patients and 4 in 3 patients with rheumatoid arthritis. Overall 5-year implant survival was 94.6%. In total, 30 complications occurred in 24 patients, mostly transient, and no severe adverse event occurred. Overall MBL change was 0.45 ± 0.12 mm, with no significant differences among groups. Conclusions: In the present sample of medically compromised patients, rehabilitation with calcium ions-modified surface implants associated with plasma rich in growth factors proved to be a safe and effective treatment. The satisfactory results achieved after 5-year follow-up are comparable to those historically reported for healthy patients.

Influence of calcium ion-modified implant surfaces in protein adsorption and implant integration

Background

Calcium (Ca) is a well-known element in bone metabolism and blood coagulation. Here, we investigate the link between the protein adsorption pattern and the in vivo responses of surfaces modified with calcium ions (Ca-ion) as compared to standard titanium implant surfaces (control). We used LC–MS/MS to identify the proteins adhered to the surfaces after incubation with human serum and performed bilateral surgeries in the medial section of the femoral condyles of 18 New Zealand white rabbits to test osseointegration at 2 and 8 weeks post-implantation (n=9).

Results

Ca-ion surfaces adsorbed 181.42 times more FA10 and 3.85 times less FA12 (p<0.001), which are factors of the common and the intrinsic coagulation pathways respectively. We also detected differences in A1AT, PLMN, FA12, KNG1, HEP2, LYSC, PIP, SAMP, VTNC, SAA4, and CFAH (p<0.01). At 2 and 8 weeks post-implantation, the mean bone implant contact (BIC) with Ca-ion surfaces was respectively 1.52 and 1.25 times higher, and the mean bone volume density (BVD) was respectively 1.35 and 1.13 times higher. Differences were statistically significant for BIC at 2 and 8 weeks and for BVD at 2 weeks (p<0.05).

Conclusions

The strong thrombogenic protein adsorption pattern at Ca-ion surfaces correlated with significantly higher levels of implant osseointegration. More effective implant surfaces combined with smaller implants enable less invasive surgeries, shorter healing times, and overall lower intervention costs, especially in cases of low quantity or quality of bone.

Supplementary Information

The online version contains supplementary material available at 10.1186/s40729-021-00314-1.

Micro/nanostructured calcium phytate coating on titanium fabricated by chemical conversion deposition for biomedical application

A bioactive micro/nanostructured calcium phytate coating was successfully prepared on titanium surfaces by chemical conversion deposition, mainly through hydrothermal treatment of a mixed solution of phytic acid and saturated calcium hydroxide solution. Ultraviolet radiation was carried out to improve the adhesion of the coating to the titanium substrate. Pure titanium with a sandblasted/acid-etched surface was used as the control group. The topography and chemical composition of the modified surfaces were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX), and static water contact angle measurement. A pull-off test was performed to measure the coating-to-substrate adhesion strength. Bovine serum albumin was used as a model to study the protein adsorption effect. Cells were cultured on titanium surfaces for 7 days in osteogenic differentiation medium, then the osteoblast compatibility in vitro were explored by alkaline phosphatase and alizarin red staining. After 1, 2, 4 and 8 wks of immediate implantation of titanium implants into the mandibles of New Zealand white rabbits, biological effects in vivo were researched by microcomputed tomography analysis and histological evaluation. The results indicated that the roughness and hydrophilicity of the modified surfaces with micro/nanostructure remarkably increased compared to those of the control group. The pull-off test showed the average adhesion strength at the coating-substrate interface to be higher than 13.56 ± 1.71 MPa. In addition, approximately 4.41 mg/L calcium ion was released from the calcium phytate micro/nano coatings to the local environment after 48 h of immersion. More importantly, the micro/nanostructure titanium substrates significantly promoted cellular differentiation in vitro and in vivo. After 8 wks, the bone implant contact ratio (BIC, %) of the modified implants was higher than that of the control group, at 94.09 ± 0.55% and 86.18 ± 1.99% (p < 0.05). Overall, this study provided new insights into the factors promoting early osseointegration of titanium alloys, which had great potential not only for dental implants but also for various other biomaterial applications.

Biocompatible Nanocomposite Enhanced Osteogenic and Cementogenic Differentiation of Periodontal Ligament Stem Cells In Vitro for Periodontal Regeneration

Decays in the roots of teeth is prevalent in seniors as people live longer and retain more of their teeth to an old age, especially in patients with periodontal disease and gingival recession. The objectives of this study were to develop a biocompatible nanocomposite with nano-sized calcium fluoride particles (Nano-CaF₂), and to investigate for the first time the effects on osteogenic and cementogenic induction of periodontal ligament stem cells (hPDLSCs) from human donors.Nano-CaF₂ particles with a mean particle size of 53 nm were produced via a spray-drying machine.Nano-CaF₂ was mingled into the composite at 0%, 10%, 15% and 20% by mass. Flexural strength (160 ± 10) MPa, elastic modulus (11.0 ± 0.5) GPa, and hardness (0.58 ± 0.03) GPa for Nano-CaF₂ composite exceeded those of a commercial dental composite (p < 0.05). Calcium (Ca) and fluoride (F) ions were released steadily from the composite. Osteogenic genes were elevated for hPDLSCs growing on 20% Nano-CaF₂. Alkaline phosphatase (ALP) peaked at 14 days. Collagen type 1 (COL1), runt-related transcription factor 2 (RUNX2) and osteopontin (OPN) peaked at 21 days. Cementogenic genes were also enhanced on 20% Nano-CaF₂ composite, promoting cementum adherence protein (CAP), cementum protein 1 (CEMP1) and bone sialoprotein (BSP) expressions (p < 0.05). At 7, 14 and 21 days, the ALP activity of hPDLSCs on 20% Nano-CaF₂ composite was 57-fold, 78-fold, and 55-fold greater than those of control, respectively (p < 0.05). Bone mineral secretion by hPDLSCs on 20% Nano-CaF₂ composite was 2-fold that of control (p < 0.05). In conclusion, the novel Nano-CaF₂ composite was biocompatible and supported hPDLSCs. Nano-CaF₂ composite is promising to fill tooth root cavities and release Ca and F ions to enhance osteogenic and cementogenic induction of hPDLSCs and promote periodontium regeneration.

Tetracalcium phosphate and biphasic tetracalcium phosphate/tricalcium phosphate powders' effects evaluation on human osteoblasts

BACKGROUND

Calcium ions levels in bone niches have been demonstrated to severely influence new bone formation. Osteoinductive scaffolds containing calcium have been largely studied to control the release of calcium in bone regeneration and tissue engineering purpose. The aim of the present study was, firstly, to synthesize two different resorbable calcium phosphate-based powders, thought to be reservoirs of calcium ions, and secondary, to investigate their effects on human osteoblasts, in order to develop a suitable titanium coating material.

METHODS

Tetracalcium phosphate (A450) and biphasic tetracalcium phosphatae/tricalcium phosphate (A850) powders were prepared with an innovative method. The presence of calcium phosphate structures was chemically confirmed with XRD. Furthermore, powders macroscopic aspect was observed with a stereomicroscope. For in-vitro experiments, human osteoblastic cells were cultured in the presence of A450 and A850, and assayed for viability and metabolic activity through Crystal Violet and MTT, respectively.

RESULTS

Our synthesis led to the formation of calcium phosphates in both samples, even though A850 presented a higher level of crystallinity and a more powdery aspects than A450. Both the samples enhanced the viability of cultured cells, inhibiting cell metabolic activity in the case of A850, which furthermore showed to be internalized by cells.

CONCLUSIONS

We developed two different kind of calcium phosphate-based powders and we tested their effect on human osteoblasts, underlying the possibility of use calcium phosphate-based coatings to enhance cell response on implantable materials.

Biological responses of MC3T3-E1 on calcium carbonate coatings fabricated by hydrothermal reaction on titanium

Titainum (Ti) implants have been successfully used in orthopaedic and dental surgery. However, poor early bone tissue integration is still a common cause of implant failure. This could be modulated by improving the material bonding or adhesion directly to the bone by surface roughening and/or a bioresorbable and osteoconductive coating. In this study, we report on the biological behaviours of the Ti substrate with modified surface roughness and/or a calcium carbonate (CaCO₃) coating. The roughened Ti surface was prepared using an acid etching reaction, and the CaCO₃ coating on the substrates was synthesized by the hydrothermal treatment of Ti in calcium citrate complexes. This study demonstrates that surface roughening of Ti alone does not improve the biological response of the MC3T3-E1 cells, but a CaCO₃ coating on the smooth Ti surface increases cell responses, and these effects are further enhanced by the combination of coating a roughened Ti surface with CaCO₃. The larger the cell area, the greater the cell proliferation and increased bone-like nodule formation were observed on the CaCO₃ coating of the roughened Ti surface. This observation was also supported by a higher ALP value. The cell behaviours found in the current study further support the development of CaCO₃ coatings towards clinical application.

The ability of topical and systemic statins to increase osteogenesis around dental implants: a systematic review of histomorphometric outcomes in animal studies

The purpose of this systematic review was to evaluate the quantitative histomorphometric outcomes of animal studies investigating statins as a pro-osteogenic agent to enhance the osseointegration of dental implants. Some animal studies have suggested a beneficial action of statins on bone tissue. Electronic and manual literature searches, without date or language restriction, ​​were performed by two independent review authors up to February 2017. Eligibility criteria included animal trials quantitatively analysing the pro-osteogenic effect of statins on dental implants. The quality of the included studies was assessed using the ARRIVE guidelines. The search and selection process yielded 12 studies, published between 2004 and 2015. The experimental animals models used were rats and dogs. The statins used in the studies were simvastatin and fluvastatin, which were administered locally or systemically, or applied to the implant surface. All of the selected studies showed a statistically significant positive effect of statins on bone formation around implants. The mean quality assessment score (ARRIVE) of the studies was 11.5±2.27 out of a possible total of 25 points. The histomorphometric data from available preclinical studies suggest a positive effect of statins on increasing osteogenesis around dental implants.

Titanium-released from dental implant enhances pre-osteoblast adhesion by ROS modulating crucial intracellular pathways

It is important to understand the cellular and molecular events that occur at the cell-material interface of implants used for bone repair. The mechanisms involved in the initial stages of osteoblast interactions with the surface of the implant material must be decisive for cell fating surrounding them. In order to address this issue, we decided to investigate if conditioned medium for dental implants was able to modulate murine pre-osteoblast metabolism. First, we determined the concentration of titanium (Ti)-containing conditioned medium and found that it was 2-fold increased (p < 0.0001). We have reported that this conditioned medium significantly up-modulated pre-osteoblast adhesion up to 24 h (p < 0.0001). In parallel, our results showed that both phosphorylations of FAK (focal adhesion kinase) at Y397 (p < 0.0011) and Cofilin at Ser03 (p < 0.0053) were also up-modulated, as well as for Rac1 expression (p < 0.0175); both of them are involved with cell adaptation by rearranging cytoskeleton actin filaments. Thereafter, Ti-containing medium stimulated ROS (reactive oxygen species) production by pre-osteoblast cells, and it is very possible that ROS compromised PTP-1B (protein tyrosine phosphatase 1B) activation since PTP1B was down-phosphorylated (p < 0.0148). The low PTP activity guarantees the phosphorylation of FAK at Y-residue, causing better pre-osteoblast adhesion in response to Ti-containing medium. Altogether, these data indicate that ROS indirectly modulate FAK phosphorylation in response to Ti-released from dental implants. Taken the results in account, these data showed for the first time that the implanted dental device is able to dynamically affect surrounding tissues, mainly by promoting a better performance of the pre-osteoblast cells. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2968-2976, 2017.

Balancing microbial and mammalian cell functions on calcium ion-modified implant surfaces

Implant integration is a complex process mediated by the interaction of the implant surface with the surrounding ions, proteins, bacteria, and tissue cells. Although most implants achieve long-term bone-tissue integration, preventing pervasive implant-centered infections demands further advances, particularly in surfaces design. In this work, we analyzed classical microrough implant surfaces (only acid etched, AE; sandblasted then acid etching, SB + AE) and a new calcium-ion-modified implant surface (AE + Ca) in terms of soft- and hard-tissue integration, bacterial adhesion, and biofilm formation. We cultured on the surfaces primary oral cells from gingiva and alveolar bone, and three representative bacterial strains of the oral cavity, emulating oral conditions of natural saliva and blood plasma. With respect to gingiva and bone cells and in the presence of platelets and plasma proteins, AE + Ca surfaces yielded in average 86% higher adhesion, 44% more proliferation, and triggered 246% more synthesis of extracellular matrix biomolecules than AE-unmodified controls. Concomitantly, AE + Ca surfaces regardless of conditioning with saliva and/or blood plasma showed significantly less bacterial adhesion (67% reduction in average) and biofilm formation (40% reduction in average) than unmodified surfaces. These results highlight the importance of a calcium-rich hydrated interface to favor mammalian cell functions over microbial colonization at implant surfaces. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 421-432, 2018.

Modification of a SLA titanium surface with calcium-containing nanosheets and its effects on osteoblast behavior

The aim of this study was to present a procedure to prepare a calcium-containing nanosheets-modified sandblasted and acid etched (SLA) titanium surface and explore its effects on osteoblast behavior.

Enhanced growth and osteogenic differentiation of MC3T3-E1 cells on Ti6Al4V alloys modified with reduced graphene oxide

Graphene and its derivatives, including graphene oxide (GO) and reduced graphene oxide (rGO), have been considered as promising candidates in tissue regeneration.

Surface properties of Ti-6Al-4V alloy part I: Surface roughness and apparent surface free energy

Titanium (Ti) and its alloys are the most often used implants material in dental treatment and orthopedics. Topography and wettability of its surface play important role in film formation, protein adhesion, following osseointegration and even duration of inserted implant. In this paper, we prepared Ti-6Al-4V alloy samples using different smoothing and polishing materials as well the air plasma treatment, on which contact angles of water, formamide and diiodomethane were measured. Then the apparent surface free energy was calculated using four different approaches (CAH, LWAB, O-W and Neumann's Equation of State). From LWAB approach the components of surface free energy were obtained, which shed more light on the wetting properties of samples surface. The surface roughness of the prepared samples was investigated with the help of optical profilometer and AFM. It was interesting whether the surface roughness affects the apparent surface free energy. It was found that both polar interactions the electron donor parameter of the energy and the work of water adhesion increased with decreasing roughness of the surfaces. Moreover, short time plasma treatment (1min) caused decrease in the surface hydrophilic character, while longer time (10min) treatment caused significant increase in the polar interactions and the work of water adhesion. Although Ti-6Al-4V alloy has been investigated many times, to our knowledge, so far no paper has been published in which surface roughness and changes in the surface free energy of the alloy were compared in the quantitative way in such large extent. This novel approach deliver better knowledge about the surface properties of differently smoothed and polished samples which may be helpful to facilitate cell adhesion, proliferation and mineralization. Therefore the results obtained present also potentially practical meaning.

Biomaterials-Potential nucleation agents in blood and possible implications

Blood, simulated body fluids, and many cell culture media are supersaturated solutions with respect to several calcium phosphates. Therefore biomaterials can act as nucleation agents and evoke heterogeneous nucleation of salts on the surface of immersed biomaterials. Depending on the field of application, this can be either beneficial or disadvantageous. Although nucleation from supersaturated solutions is an old and well-known scientific phenomenon it is not standard to test new developed materials with surface analytical methods for their ability to initiate nucleation in vitro. Therefore, this communication aims to review the mineralization effect and to emphasize the possible negative implications, especially to functionalized bone implants. Surface coatings with proteins, growth factors, and, etc., can become ineffective due to deposition of a dense calcium phosphate layer. In the case of drug loaded implants, drug release might be inhibited.

Characteristics and in vitro response of thin hydroxyapatite-titania films produced by plasma electrolytic oxidation of Ti alloys in electrolytes with particle additions

Enhanced incorporation of hydroxyapatite nanoparticles in porous titania coating formed by plasma electrolytic oxidation significantly increases surface osteogenic activity.

The enhancement of the biological properties of Ti by surface doping with hydroxyapatite (HA) is of great significance, especially for orthodontic applications. This study addressed the effects of HA particle size in the electrolyte suspension on the characteristics and biological properties of thin titania-based coatings produced on Ti–6Al–4V alloy by plasma electrolytic oxidation (PEO). Detailed morphological investigation of the coatings formed by a single-stage PEO process with two-step control of the electrical parameters was performed using the Minkowski functionals approach. The surface chemistry was studied by glow discharge optical emission spectroscopy and Fourier transform infrared spectroscopy, whereas mechanical properties were evaluated using scratch tests. The biological assessment included in vitro evaluation of the coating bioactivity in simulated body fluid (SBF) as well as studies of spreading, proliferation and osteoblastic differentiation of MC3T3-E1 cells. The results demonstrated that both HA micro- and nanoparticles were successfully incorporated in the coatings but had different effects on their surface morphology and elemental distributions. The micro-particles formed an irregular surface morphology featuring interpenetrated networks of fine pores and coating material, whereas the nanoparticles penetrated deeper into the coating matrix which retained major morphological features of the porous TiO₂ coating. All coatings suffered cohesive failure in scratch tests, but no adhesive failure was observed; moreover doping with HA increased the coating scratch resistance. In vitro tests in SBF revealed enhanced bioactivity of both HA-doped PEO coatings; furthermore, the cell proliferation/morphometric tests showed their good biocompatibility. Fluorescence microscopy revealed a well-organised actin cytoskeleton and focal adhesions in MC3T3-E1 cells cultivated on these substrates. The cell alkaline phosphatase activity in the presence of ascorbic acid and β-glycerophosphate was significantly increased, especially in HA nanoparticle-doped coatings.