The self-crosslinking smart hyaluronic acid hydrogels as injectable three-dimensional scaffolds for cells culture

A quality by design approach to optimise disulfide-linked hyaluronic acid hydrogels

In this study, the disulfide-linked hyaluronic acid (HA) hydrogels were optimised for potential application as a scaffold in tissue engineering through the Quality by Design (QbD) approach. For this purpose, HA was first modified by incorporating the cysteine moiety into the HA backbone, which promoted the formation of disulfide cross-linked HA hydrogel at physiological pH. Utilising a Design of Experiments (DoE) methodology, the critical factors to achieve stable biomaterials, i.e. the degree of HA substitution, HA molecular weight, and coupling agent ratio, were explored. To establish a design space, the DoE was performed with 65 kDa, 138 kDa and 200 kDa HA and variable concentrations of coupling agent to optimise conditions to obtain HA hydrogel with improved rheological properties. Thus, HA hydrogel with a 12 % degree of modification, storage modulus of ≈2321 Pa and loss modulus of ≈15 Pa, was achieved with the optimum ratio of coupling agent. Furthermore, biocompatibility assessments in C28/I2 chondrocyte cells demonstrated the non-toxic nature of the hydrogel, underscoring its potential for tissue regeneration. Our findings highlight the efficacy of the QbD approach in designing HA hydrogels with tailored properties for biomedical applications.

A thiolated oxidized guar gum and sodium lginate dual-network microspheres with enhanced gastric acid resistance and mucoadhesion for delivery of probiotics

Probiotics offer numerous beneficial functions for human bodies, while the low survival rate under gastric acid and short retention time in the intestine are the major obstacles to their utilization. To address these issues, we designed a novel dual-network hydrogel microsphere that combines gastric acid resistance with enhanced mucoadhesion, aiming for the targeted delivery of probiotics. Thiolated oxidized guar gum (SOGG) was disulfide-linked to form the first network, and sodium alginate (SA) was cross-linked with Ca2+ to form the second network. Under the protection of the interpenetrating dual network microspheres, a much higher viability of Lactobacillus rhamnosus (LGG) (8.73 log CFU/mL) was achieved in simulated gastric fluid, compared to the zero-survival rate of free LGG. Mucoadhesion tests showed that the adhesion rate of SOGG/SA microspheres to the intestinal mucosa was 1.75 times higher than that of thiol-free microspheres. In vivo studies revealed that LGG-loaded microspheres significantly enhanced intestinal barrier function, remodeled the gut microbiome, and alleviated DSS-induced colitis in mice. Overall, SOGG/SA microspheres provide an effective strategy to the challenges of probiotic reduction in the stomach and rapid expulsion from the intestines, enhancing their health benefits.

Hyaluronated nanohydroxyapatite responsively released from injectable hydrogels for targeted therapy of melanoma

Nanohydroxyapatite (nHAp) has attracted significant attention for its tumor suppression and tumor microenvironment modulation capabilities. However, a strong tendency to aggregate greatly affects its anti-tumor efficiency. To address this issue, a hydrogel platform consisting of thiolated hyaluronic acid (HA-SH) modified nanohydroxyapatite (nHAp-HA) and HA-SH was developed for sustained delivery of nHAp for melanoma therapy. The hydrophilic and negatively charged HA-SH significantly improved the size dispersion and stability of nHAp in aqueous media while conferring nHAp targeting effects. Covalent sulfhydryl self-cross-linking between HA-SH and nHAp-HA groups ensured homogeneous dispersion of nHAp in the matrix material. Meanwhile, the modification of HA-SH conferred the targeting properties of nHAp and enhanced cellular uptake through the HA/CD44 receptor. The hydrogel platform could effectively reduce the aggregation of nHAp and release nHAp in a sustained and orderly manner. Antitumor experiments showed that the modified nHAp-HA retained the tumor cytotoxicity of nHAp in vitro and inhibited the growth of highly malignant melanomas up to 78.6% while being able to induce the differentiation of macrophages to the M1 pro-inflammatory and antitumor phenotype. This study will broaden the application of nanohydroxyapatite in tumor therapy.

Local and Sustained Baricitinib Delivery to the Skin through Injectable Hydrogels Containing Reversible Thioimidate Adducts

Janus kinase (JAK) inhibitors are approved for many dermatologic disorders, but their use is limited by systemic toxicities including serious cardiovascular events and malignancy. To overcome these limitations, injectable hydrogels are engineered for the local and sustained delivery of baricitinib, a representative JAK inhibitor. Hydrogels are formed via disulfide crosslinking of thiolated hyaluronic acid macromers. Dynamic thioimidate bonds are introduced between the thiolated hyaluronic acid and nitrile-containing baricitinib for drug tethering, which is confirmed with 1H and 13C nuclear magnetic resonance (NMR). Release of baricitinib is tunable over six weeks in vitro and active in inhibiting JAK signaling in a cell line containing a luciferase reporter reflecting interferon signaling. For in vivo activity, baricitinib hydrogels or controls are injected intradermally into an imiquimod-induced mouse model of psoriasis. Imiquimod increases epidermal thickness in mice, which is unaffected when treated with baricitinib or hydrogel alone. Treatment with baricitinib hydrogels suppresses the increased epidermal thickness in mice treated with imiquimod, suggesting that the sustained and local release of baricitinib is important for a therapeutic outcome. This study is the first to utilize a thioimidate chemistry to deliver JAK inhibitors to the skin through injectable hydrogels, which has translational potential for treating inflammatory disorders.

Poly (γ) glutamic acid: a unique microbial biopolymer with diverse commercial applicability

Microbial biopolymers have emerged as promising solutions for environmental pollution-related human health issues. Poly-γ-glutamic acid (γ-PGA), a natural anionic polymeric compound, is composed of highly viscous homo-polyamide of D and L-glutamic acid units. The extracellular water solubility of PGA biopolymer facilitates its complete biodegradation and makes it safe for humans. The unique properties have enabled its applications in healthcare, pharmaceuticals, water treatment, foods, and other domains. It is applied as a thickener, taste-masking agent, stabilizer, texture modifier, moisturizer, bitterness-reducing agent, probiotics cryoprotectant, and protein crystallization agent in food industries. γ-PGA is employed as a biological adhesive, drug carrier, and non-viral vector for safe gene delivery in tissue engineering, pharmaceuticals, and medicine. It is also used as a moisturizer to improve the quality of hair care and skincare cosmetic products. In agriculture, it serves as an ideal stabilizer, environment-friendly fertilizer synergist, plant-growth promoter, metal biosorbent in soil washing, and animal feed additive to reduce body fat and enhance egg-shell strength.

Injectable, Shear-Thinning, Self-Healing, and Self-Cross-Linkable Benzaldehyde-Conjugated Chitosan Hydrogels as a Tissue Adhesive

Benzaldehyde-conjugated chitosan (CH-CBA) was synthesized by a coupling reaction between chitosan (CH) and carboxybenzaldehyde (CBA). The pH-sensitive self-cross-linking can be achieved through the Schiff base reaction. The degree of substitution (DS) of CH-CBA was controlled at 1.4-12.7% by optimizing the pH and reagent stoichiometry. The dynamic Schiff base linkages conferred strong shear-thinning and self-healing properties to the hydrogels. The viscosity of the 2 wt/v % CH-CBA hydrogel decreased from 5.3 × 107 mPa·s at a shear rate of 10-2 s-1 to 2.0 × 103 mPa·s at 102 s-1 at pH 7.4. The CH-CBA hydrogel exhibited excellent biocompatibility in vitro and in vivo. Moreover, the hydrogel adhered strongly to porcine small intestine, colon, and cecum samples, comparable to commercial fibrin glue, and exhibited effective in vivo tissue sealing in a mouse cecal ligation and puncture model, highlighting its potential as a biomaterial for application in tissue adhesives, tissue engineering scaffolds, etc.

Smart biodegradable hydrogels: Drug-delivery platforms for treatment of chronic ophthalmic diseases affecting the back of the eye

This paper aims to develop smart hydrogels based on functionalized hyaluronic acid (HA) and PLGA-PEG-PLGA (PLGA,poly-(DL-lactic-co-glycolic acid); PEG,polyethylene glycol) for use as intraocular drug-delivery platforms. Anti-inflammatory agent dexamethasone-phosphate (0.2 %w/v) was the drug selected to load on the hydrogels. Initially, different ratios of HA-aldehyde (HA-CHO) and thiolated-HA (HA-SH) were assayed, selecting as optimal concentrations 2 and 3 % (w/v), respectively. Optimized HA hydrogel formulations presented fast degradation (8 days) and drug release (91.46 ± 3.80 % in 24 h), thus being suitable for short-term intravitreal treatments. Different technology-based strategies were adopted to accelerate PLGA-PEG-PLGA water solubility, e.g. substituting PEG1500 in synthesis for higher molecular weight PEG3000 or adding cryopreserving substances to the buffer dissolution. PEG1500 was chosen to continue optimization and the final PLGA-PEG-PLGA hydrogels (PPP1500) were dissolved in trehalose or mannitol carbonate buffer. These presented more sustained release (71.77 ± 1.59 % and 73.41 ± 0.83 % in 24 h, respectively) and slower degradation (>14 days). In vitro cytotoxicity studies in the retinal-pigmented epithelial cell line (RPE-1) demonstrated good tolerance (viability values > 90 %). PLGA-PEG-PLGA hydrogels are proposed as suitable candidates for long-term intravitreal treatments. Preliminary wound healing studies with PLGA-PEG-PLGA hydrogels suggested faster proliferation at 8 h than controls.

A self-gelling hydrogel based on thiolated hyaluronic acid for three-dimensional culture of ovine preantral follicles

Three-dimensional (3D) ovarian follicle culture offers a promising option for fertility preservation in patients who cannot receive ovarian tissue transplantation. Our research evaluated the potential of a hydrogel composed of thiolated hyaluronic acid (HA-SH) for ovine preantral follicle development compared to routinely used alginate hydrogel (ALG). Synthesized via a carbodiimide reaction, HA-SH facilitated a self-crosslinking hydrogel through disulfide bond formation. Ovine preantral follicles (200-300 μm) retrieved through mechanical and enzymatic methods were encapsulated individually in either ALG or HA-SH hydrogels. Although both hydrogels adequately supported follicle survival, 3D integrity, and antrum formation over a 17-day in vitro culture, follicle growth was significantly higher within the HA-SH hydrogel. Gene expression analysis underscored that some folliculogenesis-related genes (ZP3, BMP7, and GJA1) and a steroidogenic gene (CYP19A1) demonstrated higher expression levels in HA-SH encapsulated follicles versus ALG. Collectively, our findings advocate for HA-SH hydrogel as a potent biomaterial for in vitro follicle cultures, attributing its efficacy to facile gelation, bio-responsiveness, and superior support for follicle growth.

Synthesis of Poly-γ-Glutamic Acid and Its Application in Biomedical Materials

Poly-γ-glutamic acid (γ-PGA) is a natural polymer composed of glutamic acid monomer and it has garnered substantial attention in both the fields of material science and biomedicine. Its remarkable cell compatibility, degradability, and other advantageous characteristics have made it a vital component in the medical field. In this comprehensive review, we delve into the production methods, primary application forms, and medical applications of γ-PGA, drawing from numerous prior studies. Among the four production methods for PGA, microbial fermentation currently stands as the most widely employed. This method has seen various optimization strategies, which we summarize here. From drug delivery systems to tissue engineering and wound healing, γ-PGA's versatility and unique properties have facilitated its successful integration into diverse medical applications, underlining its potential to enhance healthcare outcomes. The objective of this review is to establish a foundational knowledge base for further research in this field.

Thiol-yne click crosslink hyaluronic acid/chitosan hydrogel for three-dimensional in vitro follicle development

There is a great deal of potential for in vitro follicle growth to provide an alternative approach to fertility preservation. This strategy reduces the possibility of cancer cells re-exposure after transplantation, and it does not require hormone stimulation. Adopting a three-dimensional (3D) culture method helps preserve the architecture of the follicle and promotes the maturity of oocytes. In order to maintain follicle morphology, enhance the quality of mature oocytes, and facilitate meiotic spindle assembly, the current work aimed to develop the 3D in vitro preantral mouse follicle culture method. Thiolated chitosan-co-thiolated hyaluronic (CSHS) hydrogel was designed to evaluate the effects of biomaterials on ovarian follicle development. Isolated follicles from mouse ovaries were randomly divided into alginate (Alg) as a 3D control, thiolated hyaluronic acid (HASH), and CSHS groups. Single follicle was encapsulated in each hydrogel, and performed for 10 days and subsequently ovulated to retrieve mature oocytes on day 11. CSHS hydrogel promoted follicle survival and oocyte viability with maintained spherical morphology of follicle. Matured oocytes with normal appearance of meiotic spindle and chromosome alignment were higher in the CSHS group compared with those in the Alg and HASH groups. Furthermore, CSHS increased expression level of folliculogenesis genes (TGFβ-1, GDF-9) and endocrine-related genes (LHCGR, and FSHR). With various experimental setups and clinical applications, this platform could be applied as an alternative method to in vitro follicle culture with different experimental designs and clinical applications in the long-term period.

Injectable Nanocomposite Hydrogels of Gelatin-Hyaluronic Acid Reinforced with Hybrid Lysozyme Nanofibrils-Gold Nanoparticles for the Regeneration of Damaged Myocardium

Biopolymeric injectable hydrogels are promising biomaterials for myocardial regeneration applications. Besides being biocompatible, they adjust themselves, perfectly fitting the surrounding tissue. However, due to their nature, biopolymeric hydrogels usually lack desirable functionalities, such as antioxidant activity and electrical conductivity, and in some cases, mechanical performance. Protein nanofibrils (NFs), such as lysozyme nanofibrils (LNFs), are proteic nanostructures with excellent mechanical performance and antioxidant activity, which can work as nanotemplates to produce metallic nanoparticles. Here, gold nanoparticles (AuNPs) were synthesized in situ in the presence of LNFs, and the obtained hybrid AuNPs@LNFs were incorporated into gelatin-hyaluronic acid (HA) hydrogels for myocardial regeneration applications. The resulting nanocomposite hydrogels showed improved rheological properties, mechanical resilience, antioxidant activity, and electrical conductivity, especially for the hydrogels containing AuNPs@LNFs. The swelling and bioresorbability ratios of these hydrogels are favorably adjusted at lower pH levels, which correspond to the ones in inflamed tissues. These improvements were observed while maintaining important properties, namely, injectability, biocompatibility, and the ability to release a model drug. Additionally, the presence of AuNPs allowed the hydrogels to be monitorable through computer tomography. This work demonstrates that LNFs and AuNPs@LNFs are excellent functional nanostructures to formulate injectable biopolymeric nanocomposite hydrogels for myocardial regeneration applications.

Electro-responsive silk fibroin microneedles for controlled release of insulin

To date, very limited work has been done on convenient and active control of insulin release. Herein, we report an electro-responsive insulin delivery system based on thiolated silk fibroin. The disulfide cross-linking points in TSF were reduced and broken to form sulfhydryl groups under electrification, which led to the increase of microneedle swelling degree and promoted insulin release. After power failure, the sulfhydryl group is oxidised to form disulfide bond crosslinking point again, resulting in the reduction of microneedle swelling degree and thus the reduction of release rate. The insulin loaded in the electro-responsive insulin delivery system showed good reversible electroresponsive release performance. The addition of graphene reduced the microneedle resistance and increased the drug release rate under current conditions. In vivo studies on type 1 diabetic mice show that electro-responsive insulin delivery system effectively controls the blood glucose before and after feeding by switching on and off the power supply, and this blood glucose control can be maintained within the safe range (100-200 mg/dL) for a long time (11h). Such electrically responsive delivery microneedles show potential for integration with glucose signal monitoring and are expected to build closed-loop insulin delivery systems.

Granular Disulfide-Crosslinked Hyaluronic Hydrogels: A Systematic Study of Reaction Conditions on Thiol Substitution and Injectability Parameters

Granular polymer hydrogels based on dynamic covalent bonds are attracting a great deal of interest for the design of injectable biomaterials. Such materials generally exhibit shear-thinning behavior and properties of self-healing/recovery after the extrusion that can be modulated through the interactions between gel microparticles. Herein, bulk macro-hydrogels based on thiolated-hyaluronic acid were produced by disulphide bond formation using oxygen as oxidant at physiological conditions and gelation kinetics were monitored. Three different thiol substitution degrees (SD%: 65%, 30% and 10%) were selected for hydrogel formation and fully characterized as to their stability in physiological medium and morphology. Then, extrusion fragmentation technique was applied to obtain hyaluronic acid microgels with dynamic disulphide bonds that were subsequently sterilized by autoclaving. The resulting granular hyaluronic hydrogels were able to form stable filaments when extruded through a syringe. Rheological characterization and cytotoxicity tests allowed to assess the potential of these materials as injectable biomaterials. The application of extrusion fragmentation for the formation of granular hyaluronic hydrogels and the understanding of the relation between the autoclaving processes and the resulting particle size and rheological properties should expand the development of injectable materials for biomedical applications.

Thiolated Polymeric Hydrogels for Biomedical Applications: A Review

Hydrogels are a three-dimensional (3D) network of hydrophilic polymers. The physical and chemical crosslinking of polymeric chains maintains the structure of the hydrogels even when they are swollen in water. They can be modified with thiol by thiol epoxy, thiol-ene, thiol-disulfide, or thiol-one reactions. Their application as a matrix for protein and drug delivery, cellular immobilization, regenerative medicine, and scaffolds for tissue engineering was initiated in the early 21st century. This review focuses on the ingredients, classification techniques, and applications of hydrogels, types of thiolation by different thiol-reducing agents, along with their mechanisms. In this study, different applications for polymers used in thiolated hydrogels, including dextran, gelatin, polyethylene glycol (PEG), cyclodextrins, chitosan, hyaluronic acid, alginate, poloxamer, polygalacturonic acid, pectin, carrageenan gum, arabinoxylan, carboxymethyl cellulose (CMC), gellan gum, and polyvinyl alcohol (PVA) are reviewed.

Photocurable Thiol-yne Alginate Hydrogels for Regenerative Medicine Purposes

Every year millions of people worldwide undergo surgical interventions, with the occurrence of mild or severe post-treatment consequences meaning that rehabilitation plays a key role in modern medicine. Considering the cases of burns and plastic surgery, the pressing need for new materials that can be used for wound patches or body fillers and are able to sustain tissue regeneration and promote cell adhesion and proliferation is clear. The challenges facing next-generation implant materials also include the need for improved structural properties for cellular organization and morphogenic guidance together with optimal mechanical, rheological, and topographical behavior. Herein, we propose for the first time a sodium alginate hydrogel obtained by a thiol-yne reaction, easily synthesized using carbodiimide chemistry in a two-step reaction. The hydrogels were formed in all cases within a few minutes of light irradiation, showing good self-standing properties under solicitation. The mechanical, rheological, topographical, and swelling properties of the gels were also tested and reported. Lastly, no cytotoxicity was detected among the hydrogels. Soluble extracts in culture media allowed cell proliferation, and no differences between samples were detected in terms of metabolic activity and DNA content. These results suggest the potential use of these cytocompatible hydrogels in tissue engineering and regenerative medicine.

Designing functional hyaluronic acid-based hydrogels for cartilage tissue engineering

Damage to cartilage tissues is often difficult to repair owing to chronic inflammation and a lack of bioactive factors. Therefore, developing bioactive materials, such as hydrogels acting as extracellular matrix mimics, that can inhibit the inflammatory microenvironment and promote cartilage repair is crucial. Hyaluronic acid, which exists in cartilage and synovial fluid, has been extensively investigated for cartilage tissue engineering because of its promotion of cell adhesion and proliferation, regulation of inflammation, and enhancement of cartilage regeneration. However, hyaluronic acid-based hydrogels have poor degradation rates and unfavorable mechanical properties, limiting their application in cartilage tissue engineering. Recently, various multifunctional hyaluronic acid-based hydrogels, including alkenyl, aldehyde, thiolated, phenolized, hydrazide, and host–guest group-modified hydrogels, have been extensively studied for use in cartilage tissue engineering. In this review, we summarize the recent progress in the multifunctional design of hyaluronic acid-based hydrogels and their application in cartilage tissue engineering. Moreover, we outline the future research prospects and directions in cartilage tissue regeneration. This would provide theoretical guidance for developing hyaluronic acid-based hydrogels with specific properties to satisfy the requirements of cartilage tissue repair.

Reversal of Epithelial-Mesenchymal Transition and Inhibition of Tumor Stemness of Breast Cancer Cells Through Advanced Combined Chemotherapy

The abnormal activation of the Wnt/β-catenin signaling pathway and epithelial-mesenchymal transition (EMT) in drug-resistant tumor cells and cancer stem cells (CSCs) stimulate tumor metastasis and recurrence. Here, a promising combined chemotherapeutic strategy of salinomycin (SL) and doxorubicin (DOX) with specific inhibition of tumor stemness by a targeted co-delivery nanosystem was developed to overcome this abnormal progression. This strategy could be benefit drugs to effectively penetrate and infiltrate into spheres of 3D-cultured breast cancer stem cells (BCSCs). The expression of the Wnt/β-catenin signaling pathway-related genes (β-catenin, LRP6, LEF1, and TCF12) and target genes (Cyclin D1, Cmyc, and Fibronectin) as well as CSC stemness-related genes (Oct4, Nanog, and Hes1) was downregulated by redox-sensitive co-delivery micelles decorated with oligohyaluronic acid as the active targeting moiety. The changes in EMT-associated gene expression (E-cadherin and Vimentin) in vitro showed that the EMT process was also effectively inverted. This strategy achieved a strong inhibitory effect on solid tumor growth and an effective reduction in the risk of tumor metastasis in 4T1 tumor-bearing mice in vivo and effectively alleviated splenomegaly caused by the malignant tumor. Immunohistochemical staining analysis of E-cadherin, Vimentin, and β-catenin confirmed that the inversion of the EMT was also achieved in solid tumors. These results highlight the potential of SL and DOX combined chemotherapeutic strategy for eliminating breast carcinoma. STATEMENT OF SIGNIFICANCE: Cancer stem cells (CSCs), as an important part of tumor heterogeneity, can survive against conventional chemotherapy and initiate tumorigenesis, recurrence, and metastasis. Moreover, non-CSCs can convert into the CSC state through the abnormal Wnt/β-catenin pathway, which is closely related to the epithelial-mesenchymal transition (EMT) process. Here, redox-degradable binary drug-loaded micelles (PPH/DOX+SL) were designed to target CSCs and overcome drug resistance of breast cancer cells. The combined chemotherapy of salinomycin (SL) and doxorubicin (DOX) reversed drug resistance, while the PPH/DOX+SL micelles enhanced the intracellular accumulation and drug penetration of BCSC spheres. The introduction of SL downregulated the expression of tumor stemness genes and the Wnt/β-catenin pathway-related genes and inverted the EMT process. PPH/DOX+SL continuously inhibited tumor growth and invasion in vivo.

Synthesis of Novel Hyaluronic Acid Sulfonated Hydrogels Using Safe Reactants: A Chemical and Biological Characterization

Here, we present a one-pot procedure for the preparation of hyaluronic acid (HA) sulfonated hydrogels in aqueous alkaline medium. The HA hydrogels were crosslinked using 1,4-butanedioldiglycidyl ether (BDDE) alone, or together with N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid (Bes), as a safe sulfonating agent. Conditions for the simultaneous reaction of HA with BDDE and Bes were optimized and the resulting hydrogels were characterized under different reaction times (24, 72, and 96 h). The incorporation of sulfonic groups into the HA network was proven by elemental analysis and FTIR spectroscopy and its effect on water uptake was evaluated. Compared with the non-sulfonated sample, sulfonated gels showed improved mechanical properties, with their compressive modulus increased from 15 to 70 kPa, higher stability towards hyaluronidase, and better biocompatibility to 10T1/2 fibroblasts, especially after the absorption of collagen. As main advantages, the procedure described represents an easy and reproducible methodology for the fabrication of sulfonated hydrogels, which does not require toxic chemicals and/or solvents.

Chitosan/sulfobutylether-β-cyclodextrin based nanoparticles coated with thiolated hyaluronic acid for indomethacin ophthalmic delivery

Indomethacin (IND) is topically administered for the treatment of the anterior segment diseases such as conjunctivitis, uveitis, and inflammation prevention for post-cataract surgery, as well as posterior segment diseases as macular edema. Currently IND is available as 0.1% w/v hydroxypropyl-β-cyclodextrin-based eye drop formulation and its bioavailability is limited by several drawbacks such as the nasolacrimal duct draining, the reflex blinking and the low volume of the conjunctival sac. In this study, chitosan (CS)/sulfobutylether-β-cyclodextrin (SBE-β-CD) based nanoparticles (NPs) with a mean diameter of 340 (±7) nm, a ζ-potential value of +18.3 (±0.5) mV and coated with thiolated low molecular weight hyaluronic acid were formulated to improve both the solubility and the residential time in the conjunctival sac of the loaded drug IND. The NPs were prepared through the ionotropic gelation technique, exploiting the interaction between the positively charged amino group of CS and the negatively charged sulfonic group of SBE-β-CD. The mucoadhesive properties of the NPs were evaluated on chicken trachea and esophagus tissues using a texture analyser. The irritability effects of NPs were disclaimed with Hecam test. The developed coated NPs showed increased residential time in the conjunctival sac, displayed no irritancy or toxicity for local administration, making them an optimal and innovative drug delivery system for the treatment of anterior segment inflammation diseases. On the other hand, the uncoated NPs displayed better permeating properties since they are smaller and could be further exploited for the treatment of posterior segment diseases.

Hyaluronic Acid Hydrogels Hybridized With Au-Triptolide Nanoparticles for Intraarticular Targeted Multi-Therapy of Rheumatoid Arthritis

Rheumatoid arthritis (RA) is a chronic inflammatory disease, characterized by synovial inflammation in multiple joints. Triptolide (TP) is a disease-modifying anti-rheumatic drug (DMARD) highly effective in patients with RA and has anti-inflammatory properties. However, its clinical application has been limited owing to practical disadvantages. In the present study, hyaluronic acid (HA) hydrogel-loaded RGD-attached gold nanoparticles (AuNPs) containing TP were synthesized to alleviate the toxicity and increase therapeutic specificity. The hydrogels can be applied for targeted photothermal-chemo treatment and in vivo imaging of RA. Hydrogel systems with tyramine-modified HA (TA-HA) conjugates have been applied to artificial tissue models as surrogates of cartilage to investigate drug transport and release properties. After degradation of HA chains, heat was locally generated at the inflammation region site due to near-infrared resonance (NIR) irradiation of AuNPs, and TP was released from nanoparticles, delivering heat and drug to the inflamed joints simultaneously. RA can be penetrated with NIR light. Intraarticular administration of the hydrogels containing low dosage of TP with NIR irradiation improved the inflamed conditions in mice with collagen-induced arthritis (CIA). Additionally, in vitro experiments were applied to deeply verify the antirheumatic mechanisms of TP-PLGA-Au@RGD/HA hydrogels. TP-PLGA-Au@RGD/HA hydrogel treatment significantly reduced the migratory and invasive capacities of RA fibroblast-like synoviocytes (RA-FLS) in vitro, through the decrease of phosphorylation of mTOR and its substrates, p70S6K1, thus inhibiting the mTOR pathway.

Adipose tissue derived stromal cells in a gelatin based 3D matrix with exclusive ascorbic acid signalling emerged as a novel neural tissue engineering construct – An innovative prototype for soft tissue

The current study investigated a triad, which comprises of adipose tissue derived stem cells isolated from infrapatellar fat pad and gelatin/polyvinyl alcohol (PVA)-based matrix with exclusive ascorbic acid signalling. Though, the bio-mechanical properties of the gelatin–PVA blended scaffolds in wet condition are equivalent to the ECM of soft tissues in general, in this study, the triad was tested as a model for neural tissue engineering. Apart from being cytocompatible and biocompatible, the porosity of the scaffold has been designed in such a manner that it facilitates the cell signalling and enables the exchange of nutrients and gases. The highly proliferative stem cells from Passage 2 were characterized using both, mesenchymal and embryonic stem cell markers. As an initial exploration the mesenchymal stem cells at Passage 4 were exposed to ascorbic acid and basic fibroblast growth factor signalling for neuronal differentiation in 2D environment independently. The MSCs successfully differentiated and acquired neuron specific markers related to cytoskeleton and synapses. Subsequently, three phases of experiments have been conducted on the 3D gelatin/PVA matrix to prove their efficacy, the growth of stem cells, growth of differentiated neurons and the in situ growth and differentiation of MSCs. The scaffold was conducive and directed MSCs to neuronal lineage under specific signalling. Overall, this organotypic model triad could open a new avenue in the field of soft tissue engineering as a simple and effective tissue construct.

Application of Cross-Linked and Non-Cross-Linked Hyaluronic Acid Nano-Needles in Cosmetic Surgery

The common feature of non-cross-linked hyaluronic acid nano-needles is that they penetrate the skin and dissolve rapidly, and the non-cross-linked hyaluronic acid will migrate under the skin, so it is difficult to maintain the long-term expansion effect in a fixed position. In order to achieve the relatively long-term antiwrinkle effect, a kind of cross-linked and non-cross-linked compound hyaluronic acid microne was prepared. By inserting the microne under the skin, dissolving the non-cross-linked part under the skin and introducing the cross-linked gel particles under the skin, the effect of extending the microne was achieved. The mechanical properties, permeability, and degradation rate of cross-linked and non-cross-linked hyaluronic acid composite nano-needles were studied in detail. Experimental results show that the higher the content of CHA, the slower the degradation rate of the microneedle, and the skin swelling of the HA_CHA (1 : 1) microneedle is the most lasting. With the increase of CHA content in microneedle matrix materials, the degree of epidermal expansion decreased. The preparation of cross-linked and non-cross-linked hyaluronic acid microneedles has the potential to be effectively used as dermal fillers in cosmetics or antiaging treatments.

Triple Cross-Linked Hyaluronic Acid Based on Tri-Hyal Technique Has More Durable Effect on Dermal Renewal

Background

Hyaluronic acid (HA)-based fillers are applied to treat facial wrinkles and volume loss. Many efforts have been made to improve properties of HA to prolong the duration in aesthetic indications. A new cross-linking technique called “Tri-Hyal”, could make HAs to achieve desired rheological characteristics. HAs synthesized by Tri-Hyal are triple cross-linked and sustained-release, which could increase duration of promoting skin rejuvenation after injection.

Purpose

To evaluate the efficiency and persistence of HAs with Tri-Hyal on skin rejuvenation and further investigate underlying mechanisms, we compared the performances of cross-linked HA (AF) based on Tri-Hyal with another highly acceptable HA filler (Res) in vivo and in vitro.

Methods

Male BALB/c mice were divided into three groups, treated with AF, Res and vehicle, respectively. Skin biopsies were taken on day 0, 30, 90 and 180 after injection and hematoxylin and eosin (H&E), Masson’s trichrome (MT), immunohistochemical (IHC) stainings for CD31, TGF-β and MMP9 were performed. EdU incorporation, cell counting kit-8 (CCK-8), SA-β-Gal staining and activity were measured by biochemical analysis. RFP-GFP-LC3 adeno virus was used for autophagic flux detection. Protein levels of CD44, P62 and LC3I/II were detected by Western blot. Reactive oxygen species (ROS) level was detected by flow cytometry with DCFH-DA probe.

Results

The AF synthesized by Tri-Hyal showed persistent dermal structural correction without attenuation up to 6 months, which was illustrated by skin thickness, formation of elastic fibers and vascular density. Consistently, in fibroblasts the AF improved cell proliferation and slowed the senescent in vitro. Furthermore, it promoted cellular autophagy to reduce ROS level, which would account for its function in skin renewal.

Conclusion

The HA with Tri-Hyal could stimulate the production of extracellular matrix components more persistently than traditional HA fillers. In terms of mechanisms, it delayed senescence in dermal fibroblasts through reducing oxidative stress mediated by induction of autophagy.

Injectable Self-Crosslinkable Thiolated Hyaluronic Acid for Stem Cell Therapy of Atopic Dermatitis

Stem cell therapies offer great promise in regenerative medicine to reinstate the normal function of diseased tissue, thereby avoiding the need for replacement. In stem cell therapies, damaged cells are replaced or restored by regulating inflammation and the immune system. However, the low survival rate and local retention of transplanted cells pose a significant challenge. In this study, injectable self-crosslinkable hydrogels using thiol-functionalized hyaluronic acid (HA-SH) were developed to improve the efficacy of mesenchymal stem cells (MSCs) for treating atopic dermatitis (AD)-related inflammatory lesions. The gelation kinetics and mechanical properties of HA-SH hydrogels were easily tuned by varying the concentration of the polymer in the precursor solution before injection. The MSC-laden HA-SH hydrogels exhibited high cell viability (>80%) for 1 week and good in vivo biocompatibility after implantation beneath the mouse skin. Moreover, the MSC-laden HA-SH hydrogel showed increased expression of anti-inflammatory cytokines, which can alleviate the immune response. In an AD animal model, a reduction in epidermal thickness and mast cell infiltration was achieved by applying a self-crosslinkable HA-SH solution including MSCs. This HA-based injectable hydrogel represents a potential carrier of stem cells, and its strong immunomodulation capabilities can be utilized for treating inflammation-related diseases.

Multiple Crosslinking Hyaluronic Acid Hydrogels with Improved Strength and 3D Printability

Hyaluronic acid (HA) hydrogel is preferred for biomedicine applications, as it possesses biodegradability, biocompatibility, and cell-regulated capacity as well as high hydration nature similar to the native extracellular matrix. However, HA hydrogel fabricated via a 3D printing technique often faces poor printing properties. In this study, maleiated sodium hyaluronate (MHA) with a high substituted degree of the acrylate group (i.e., 2.27) and thiolated sodium hyaluronate (SHHA) were synthesized. By blending these modified HAs, the MHA/SHHA hydrogels were prepared via pre-crosslinking through thiol-acrylate Michael addition and subsequently covalent crosslinking using thiol-acrylate and acrylate-acrylate photopolymerization mechanisms. Rheological properties, swelling behaviors, and mechanical properties can be modulated by altering the molar ratio of the thiol group and acrylate group. The results showed that the MHA/SHHA hydrogel precursors have rapidly gelling capacity and improved compressive strength. Based on these results, high-resolution hydrogel scaffolds with good structural stability were prepared by extrusion-based 3D printing. This HA hydrogel is cytocompatible and capable of supporting adherence of L929 cells, indicating its great potential for tissue engineering scaffolds.

In situ gel implant for postsurgical wound management and extended chemoimmunotherapy against breast cancer recurrence

Postsurgical recurrence of breast cancer is closely related to the inflammatory tumor microenvironment evoked by surgical wounds. Toll-like receptor 4 (TLR4) signaling contributes to NF-κB activation thus secreting various inflammatory cytokines. Herein, we developed an in situ photo-crosslinked hydrogel (D/T gel) concurrently loaded with doxorubicin (DOX) and a TLR4 antagonist, resatorvid (TAK-242). Its therapeutic effect against breast cancer postsurgical relapse was accomplished through remodeling the proinflammatory tumor microenvironment. The obtained gel network exhibited ideal biodegradability and biocompatibility, which motivated dermal wound healing in the full thickness wound model in mice. Despite the initial burst release of DOX, D/T gels exhibited extended-release of both DOX and TAK-242 for up to 21 days in vitro. TAK-242 was demonstrated to inhibit the lipopolysaccharide-induced NF-κB activation and downregulate TLR4 levels in both RAW264.7 and 4T1 cells. In a 4T1-Luc tumor postsurgical recurrence model, D/T gel significantly suppressed recurrent tumor growth by elevating the concentrations of DOX and TAK-242 at the tumor sites and remodeling the TLR4 activation-induced proinflammatory microenvironment. Overall, the D/T gel platform technology is proven to deliver therapeutics directly to the surgical wound bed, attenuating the dual inflammatory responses induced by DOX and surgical wounding thus greatly potentiating its efficacy in preventing postsurgical tumor recurrence. STATEMENT OF SIGNIFICANCE: Postsurgical recurrence of breast cancer is closely related to the inflammatory tumor microenvironment (TME) evoked by surgical wounds. Although chemotherapeutics lead to extensive residual tumor cell necrosis, multiple inflammatory cytokines are secreted simultaneously, which are conducive to tumor recurrence. In this work, a TLR4 antagonist, TAK-242, was combined with DOX to reverse the dual inflammatory TME induced by surgical wounding and chemotherapy. To elevate the concentration of therapeutics at the tumor site, a photocrosslinked hydrogel (D/T gel) implant coloaded with TAK-242 and DOX was developed and applied on the postsurgical bed. Consequently, D/T gel attenuated the dual inflammatory responses and greatly potentiated its efficacy in preventing postsurgical tumor recurrence.

Collagen- and hyaluronic acid-based hydrogels and their biomedical applications

Hydrogels have been widely investigated in biomedical fields due to their similar physical and biochemical properties to the extracellular matrix (ECM). Collagen and hyaluronic acid (HA) are the main components of the ECM in many tissues. As a result, hydrogels prepared from collagen and HA hold inherent advantages in mimicking the structure and function of the native ECM. Numerous studies have focused on the development of collagen and HA hydrogels and their biomedical applications. In this extensive review, we provide a summary and analysis of the sources, features, and modifications of collagen and HA. Specifically, we highlight the fabrication, properties, and potential biomedical applications as well as promising commercialization of hydrogels based on these two natural polymers.

Hyaluronic Acid Hydrogels Crosslinked in Physiological Conditions: Synthesis and Biomedical Applications

Hyaluronic acid (HA) hydrogels display a wide variety of biomedical applications ranging from tissue engineering to drug vehiculization and controlled release. To date, most of the commercially available hyaluronic acid hydrogel formulations are produced under conditions that are not compatible with physiological ones. This review compiles the currently used approaches for the development of hyaluronic acid hydrogels under physiological/mild conditions. These methods include dynamic covalent processes such as boronic ester and Schiff-base formation and click chemistry mediated reactions such as thiol chemistry processes, azide-alkyne, or Diels Alder cycloaddition. Thermoreversible gelation of HA hydrogels at physiological temperature is also discussed. Finally, the most outstanding biomedical applications are indicated for each of the HA hydrogel generation approaches.

Engineering Polysaccharides for Tissue Repair and Regeneration

The success of repair or regeneration depends greatly on the architecture of 3D scaffolds that finely mimic natural extracellular matrix to support cell growth and assembly. Polysaccharides have excellent biocompatibility with intrinsic biological cues and they have been extensively investigated as scaffolds for tissue engineering and regenerative medicine (TERM). The physical and biochemical structures of natural polysaccharides, however, can barely meet all the requirements of tissue-engineered scaffolds. To take advantage of their inherent properties, many innovative approaches including chemical, physical, or joint modifications have been employed to improve their properties. Recent advancement in molecular and material building technology facilitates the fabrication of advanced 3D structures with desirable properties. This review focuses on the latest progress of polysaccharide-based scaffolds for TERM, especially those that construct advanced architectures for tissue regeneration.

Hydroxyethyl chitosan hydrogels for enhancing breast cancer cell tumorigenesis

Polysaccharide hydrogels are promising candidate matrices for recapitulating the characteristics of extracellular matrix (ECM) in breast tumors in terms of their structure and composition. Herein, to obtain an ECM-mimetic matrix, hydroxyethyl chitosan (HECS) hydrogels were prepared through Schiff-base crosslinking reaction using dialdehyde hyaluronic acid as crosslinker. The obtained HECS hydrogels displayed a highly porous structure, a stiffness comparable to that of breast tissue, and a fast water-absorption speed. The amount of crosslinker had great effects on the swelling and rheological behaviors of the HECS hydrogels. Preliminary results from in vitro biological assessments confirmed that MCF-7 cells incubated within HECS hydrogels preferred to grow into three-dimensional spheroids. Importantly, the cells displayed enhanced migrative capability and upregulated expression levels of MMP-2, TGF-β and VEGF in comparison to two-dimension cultured cells. Hence, the HECS hydrogels show great promise as a biomimetic ECM in constructing breast tumor models.

Thiolated-Polymer-Based Nanoparticles as an Avant-Garde Approach for Anticancer Therapies-Reviewing Thiomers from Chitosan and Hyaluronic Acid

Thiomers (or thiolated polymers) have broken through as avant-garde approaches in anticancer therapy. Their distinguished reactivity and properties, closely linked to their final applications, justify the extensive research conducted on their preparation and use as smart drug-delivery systems (DDSs). Multiple studies have demonstrated that thiomer-rich nanoformulations can overcome major drawbacks found when administering diverse active pharmaceutical ingredients (APIs), especially in cancer therapy. This work focuses on providing a complete and concise review of the synthetic tools available to thiolate cationic and anionic polymers, in particular chitosan (CTS) and hyaluronic acid (HA), respectively, drawing attention to the most successful procedures. Their chemical reactivity and most relevant properties regarding their use in anticancer formulations are also discussed. In addition, a variety of NP formation procedures are outlined, as well as their use in cancer therapy, particularly for taxanes and siRNA. It is expected that the current work could clarify the main synthetic strategies available, with their scope and drawbacks, as well as provide some insight into thiomer chemistry. Therefore, this review can inspire new research strategies in the development of efficient formulations for the treatment of cancer.

Bioinspired polysaccharide hybrid hydrogel promoted recruitment and chondrogenic differentiation of bone marrow mesenchymal stem cells

Cartilage regeneration by biomimetic cartilage matrix with synchronously recruited stem cells was one of ideal strategies. Inspired by catechol for proteins adhesion, dopamine modified polysaccharide hybrid hydrogel (HD-C) was prepared by integrating collagen I (Col I) and hyaluronic acid derivatives (HA-DN) with sulfhydryl modified polysaccharide hybrid hydrogel (HS-C) as control. Because of double-crosslinking architecture, HD-C hydrogel was endowed with a more compact pore structure, higher mechanical properties and water retention ability in comparison with those of HS-C hydrogel. Meanwhile, it significantly promoted the proliferation and spread of rabbit bone marrow stem cells (rBMSCs), and accelerated cartilaginous matrix secretion. RT-PCR results also verified higher related gene expression of chondrogenesis (Sox 9, Agg and Col II). Moreover, HD-C hydrogel could enhance the enrichment and migration of rBMSCs in vitro by potential functional protein adsorption mechanisms, and this phenomenon was further confirmed by more rBMSCs migration in short-term joint implantation experiments in vivo.

Injectable Hyaluronic Acid/Poly(γ-glutamic acid) Hydrogel with Step-by-step Tunable Properties for Soft Tissue Engineering

Injectable hydrogels as an important class of biomaterials have gained much attention in tissue engineering. However, their crosslinking degree is difficult to be controlled after being injected into body. As we all know, the crosslinking degree strongly influences the physicochemical properties of hydrogels. Therefore, developing an injectable hydrogel with tunable crosslinking degree in vivo is important for tissue engineering. Herein, we present a dual crosslinking strategy to prepare injectable hydrogels with step-by-step tunable crosslinking degree using Schiff base reaction and photopolymerization. The developed hyaluronic acid/poly(γ-glutamic acid) (HA/γ-PGA) hydrogels exhibit step-by-step tunable swelling behavior, enzymatic degradation behavior and mechanical properties. Mechanical performance tests show that the storage moduli of HA/γ-PGA hydrogels are all less than 2000 Pa and the compressive moduli are in kilopascal, which have a good match with soft tissue. In addition, NIH 3T3 cells encapsulated in HA/γ-PGA hydrogel exhibit a high cell viability, indicating a good cytocompatibility of HA/γ-PGA hydrogel. Therefore, the developed HA/γ-PGA hydrogel as an injectable biomaterial has a good potential in soft tissue engineering.

Efficient Surface Immobilization of Chemically Modified Hyaluronans for Enhanced Bioactivity and Survival of In Vitro-Cultured Embryonic Salivary Gland Mesenchymal Cells

Embryonic salivary gland mesenchyme (eSGM) secretes various growth factors (bioactives) that support the proper growth and differentiation of salivary gland epithelium. Therefore, eSGM cells can be used as feeder cells for in vitro-cultured artificial salivary gland if their survival and bioactivity are properly maintained. As eSGM is encapsulated in a hyaluronan (HA)-rich developmental milieu, we hypothesized that mimicking this environment in vitro via surface immobilization of HA might enhance survival and bioactivity of eSGM. In this study, various HA derivatives, conjugated with catechol (HA–CA), thiol (HA–SH), or amine (HA–EDA) moieties, respectively, were screened for their efficacy of culturing eSGM-derived feeder cells in vitro. Among these HA derivatives, HA–CA showed the highest surface coating efficiency and growth enhancement effect on the embryonic submandibular gland. In addition, the HA–CA coating enhanced the production of growth factors EGF and FGF7, but not FGF10. These effects were maintained when eSGM cells isolated from the embryonic salivary gland were re-seeded to develop the feeder layer cells. CD44s (a major HA receptor) in eSGM cells were clustered at the cell membrane, and enhanced EGF expression was detected only in CD44 cluster-positive cells, suggesting that membrane clustering of CD44 is the key mechanism for the increased expression of EGF.

Hyaluronic acid functionalized gold nanorods combined with copper-based therapeutic agents for chemo-photothermal cancer therapy

We herein report a hybrid nanocomposite (AuNRs-CTN@THA) which is based on hyaluronic acid-coated gold nanorods with loading of a copper complex through strong bonds. AuNRs-CTN@THA exhibits durable photothermal conversion capacity for pH-dominant and pH/temperature dual sensitive drug release, accomplishing synergetic antitumor efficacy and deep tumor penetration.

Cell-mediated injectable blend hydrogel-BCP ceramic scaffold for in situ condylar osteochondral repair

The existing approaches for healing mandibular condylar osteochondral defects, which are prevalent in temporomandibular joint disorders (TMD), are sparse and not reparative. To address this, regenerative medicine in situ has transpired as a potential therapeutic solution as it can effectively regenerate composite tissues. Herein, injectable self-crosslinking thiolated hyaluronic acid (HA-SH)/type I collagen (Col I) blend hydrogel and BCP ceramics combined with rabbit bone mesenchymal stem cells (rBMSCs)/chondrocytes were used to fabricate a new bi-layer scaffold to simulate specific structure of rabbit condylar osteochondral defects. The in vitro results demonstrated that the blend hydrogel scaffold provided suitable microenvironment for simultaneously realizing proliferation and chondrogenic specific matrix secretion of both rBMSCs and chondrocytes, while BCP ceramics facilitated rBMSCs proliferation and osteogenic differentiation. The in vivo results confirmed that compared with cell-free implant, the rBMSCs/chondrocytes-loaded bi-layer scaffold could effectively promote the regeneration of both fibrocartilage and subchondral bone, suggesting that the bi-layer scaffold presented a promising option for cell-mediated mandibular condylar cartilage regeneration.

Nanoparticle-Hydrogel Composite Drug Delivery System for Potential Ocular Applications

Intravitreal injections are clinically established procedures in the treatment of posterior eye diseases, such as wet age-related macular degeneration (wet AMD) which requires monthly intravitreal injections of anti-vascular endothelial growth factor (anti-VEGF) protein drugs that can lead to complications due to frequent dosing. In this study, we designed a composite drug delivery system (DDS) consisting of drug-loaded poly (lactide–co–glycolide) (PLGA) nanoparticles and a chemically crosslinked hyaluronan hydrogel to reduce the dosing frequency. The morphology, size, composition, and drug loading efficiency of the prepared nanoparticles were characterized. The properties of the modified hyaluronan polymers used were also examined. The degree of swelling/degradation and controlled release ability of the hyaluronan hydrogel and the composite DDS were identified using bovine serum albumin (BSA) as a model drug. The results show that this system can retain 75% of its wet weight without losing its integrity and release the model drug at the rate of 0.4 μg/day for more than two months under physiological conditions. In addition, the nanoparticulate formulation of the system can further improve bioavailability of the drugs by penetrating deep into the retinal layers. In conclusion, the proposed composite DDS is easily prepared with biocompatible materials and is promising for providing the sustained release of the protein drugs as a better treatment for ocular neovascular diseases like wet AMD.

Surface Coating with Hyaluronic Acid-Gelatin-Crosslinked Hydrogel on Gelatin-Conjugated Poly(dimethylsiloxane) for Implantable Medical Device-Induced Fibrosis

Polydimethylsiloxane (PDMS) is a biocompatible polymer that has been applied in many fields. However, the surface hydrophobicity of PDMS can limit successful implementation, and this must be reduced by surface modification to improve biocompatibility. In this study, we modified the PDMS surface with a hydrogel and investigated the effect of this on hydrophilicity, bacterial adhesion, cell viability, immune response, and biocompatibility of PDMS. Hydrogels were created from hyaluronic acid and gelatin using a Schiff-base reaction. The PDMS surface and hydrogel were characterized using nuclear magnetic resonance, X-ray photoelectron spectroscopy, attenuated total reflection Fourier-transform infrared spectroscopy, and scanning electron microscopy. The hydrophilicity of the surface was confirmed via a decrease in the water contact angle. Bacterial anti-adhesion was demonstrated for Pseudomonas aeruginosa, Ralstonia pickettii, and Staphylococcus epidermidis, and viability and improved distribution of human-derived adipose stem cells were also confirmed. Decreased capsular tissue responses were observed in vivo with looser collagen distribution and reduced cytokine expression on the hydrogel-coated surface. Hydrogel coating on treated PDMS is a promising method to improve the surface hydrophilicity and biocompatibility for surface modification of biomedical applications.

Reversing P-Glycoprotein-Associated Multidrug Resistance of Breast Cancer by Targeted Acid-Cleavable Polysaccharide Nanoparticles with Lapatinib Sensitization

For reversing the treatment failure in P-glycoprotein (P-gp)-associated MDR (multidrug resistance) of breast cancer, a high dose of Lapatinib (Lap), a substrate of breast cancer-resistant protein, was encapsulated into safe and effective acid-cleavable polysaccharide-doxorubicin (Dox) conjugates to form targeted HPP-Dox/Lap nanoparticles with an optimal drug ratio and appropriate nanosize decorated with oligomeric hyaluronic acid (HA) for specially targeting overexpressed CD44 receptors of MCF-7/ADR. The markedly increased cellular uptake and the strongest synergetic cytotoxicity revealed the enhanced reversal efficiency of HPP-Dox/Lap nanoparticles with reversal multiples at 29.83. This was also verified by the enhanced penetrating capacity in multicellular tumor spheroids. The reinforced Dox retention and substantial down-regulation of P-gp expression implied the possible mechanism of MDR reversal. Furthermore, the efficient ex vivo accumulation and distribution of nanoparticles in the tumor site and the high tumor growth inhibition (93%) even at a lower dosage (1 mg/kg) as well as lung metastasis inhibition in vivo with negligible side effects revealed the overwhelming advantages of targeted polysaccharide nanoparticles and Lap-sensitizing effect against drug-resistant tumor. The development of an efficient and nontoxic-targeted polysaccharide delivery system for reversing MDR by synergistic therapy might provide a potential clinical application value.

Synthesis and characterization of biphasic calcium phosphate laden thiolated hyaluronic acid hydrogel based scaffold: physical and in-vitro biocompatibility evaluations

The present study focused on the combination of biphasic calcium phosphate (BCP) nanoparticles into the modified hyaluronic acid based injectable hydrogels for bone tissue engineering. Self-cross-linked thiolated hyaluronic acid (HA-HS) injectable hydrogels loaded with biphasic calcium phosphate (BCP) nanoparticles were prepared by disulfide cross-linking to mimic the extracellular matrix as a potential material for bone treatment. Varying concentration of HA-HS ranging between 1 and 5w/v% was tested to optimize the optimum concentration and were further modified with varying BCP concentrations for final optimization. Physico-chemical characterizations of the prepared hydrogel such as SEM, EDS, FT-IR, and XRD confirmed that the BCP has effectively loaded and distributed homogeneously in the HA-HS hydrogel. The results showed that the 3% (w/v) HA-HS hydrogel exhibits the appropriate properties for injectable hydrogel system such as gelation times, swelling rate and in vitro degradation behavior among all tested concentrations. Cell viability and cell proliferation using osteoblast cells (MC3T3-E1) demonstrated that the BCP laden modified hydrogel are biocompatible in vitro. In light of the encouraging results obtained, BCP laden HA-HS hydrogels might offer the potential to be used as injectable hydrogel in bone tissue engineering.

Encapsulation of Lactobacillus rhamnosus in Hyaluronic Acid-Based Hydrogel for Pathogen-Targeted Delivery to Ameliorate Enteritis

Probiotics were found to be effective in ameliorating the microbial dysbiosis and inflammation caused by intestinal pathogens. However, biological challenges encountered during oral delivery have greatly limited their potential health benefits. Here, a model probiotic (Lactobacillus rhamnosus) was encapsulated in an intestinal-targeted hydrogel to alleviate bacterial enteritis in a novel mode. The hydrogel was prepared simply by the self-cross-linking of thiolated hyaluronic acid. Upon exposure to H₂S which were excreted by surrounding intestinal pathogens, the hydrogel can locally degrade and rapidly release cargos to compete with source pathogens in turn for binding to the host. The mechanical properties of hydrogel were studied by rheological analysis, and the ideal stability was achieved at a polymer concentration of 4% (w/v). The morphology of the optimal encapsulation system was further measured by a scanning electron microscope, exhibiting uniform payload of probiotics. Endurance experiments indicated that the encapsulation of L. rhamnosus significantly enhanced their viability under gastrointestinal tract insults. Compared with free cells, encapsulated L. rhamnosus exerted better therapeutic effect against Salmonella-induced enteritis with negligible toxicity in vivo. These results demonstrate that this redox-responsive hydrogel may be a promising encapsulation and delivery system for improving the efficacy of orally administered probiotics.