Hyaluronic acid and vitamin E polyethylene glycol succinate functionalized gold-core silica shell nanorods for cancer targeted photothermal therapy

Chitosan- and hyaluronic acid-based nanoarchitectures in phototherapy: Combination cancer chemotherapy, immunotherapy and gene therapy

Cancer phototherapy has been introduced as a new potential modality for tumor suppression. However, the efficacy of phototherapy has been limited due to a lack of targeted delivery of photosensitizers. Therefore, the application of biocompatible and multifunctional nanoparticles in phototherapy is appreciated. Chitosan (CS) as a cationic polymer and hyaluronic acid (HA) as a CD44-targeting agent are two widely utilized polymers in nanoparticle synthesis and functionalization. The current review focuses on the application of HA and CS nanostructures in cancer phototherapy. These nanocarriers can be used in phototherapy to induce hyperthermia and singlet oxygen generation for tumor ablation. CS and HA can be used for the synthesis of nanostructures, or they can functionalize other kinds of nanostructures used for phototherapy, such as gold nanorods. The HA and CS nanostructures can combine chemotherapy or immunotherapy with phototherapy to augment tumor suppression. Moreover, the CS nanostructures can be functionalized with HA for specific cancer phototherapy. The CS and HA nanostructures promote the cellular uptake of genes and photosensitizers to facilitate gene therapy and phototherapy. Such nanostructures specifically stimulate phototherapy at the tumor site, with particle toxic impacts on normal cells. Moreover, CS and HA nanostructures demonstrate high biocompatibility for further clinical applications.

Enhanced Efficacy against Drug-Resistant Tumors Enabled by Redox-Responsive Mesoporous-Silica-Nanoparticle-Supported Lipid Bilayers as Targeted Delivery Vehicles

Multidrug resistance (MDR) is frequently induced after long-term exposure to reduce the therapeutic effect of chemotherapeutic drugs, which is always associated with the overexpression of efflux proteins, such as P-glycoprotein (P-gp). Nano-delivery technology can be used as an efficient strategy to overcome tumor MDR. In this study, mesoporous silica nanoparticles (MSNs) were synthesized and linked with a disulfide bond and then coated with lipid bilayers. The functionalized shell/core delivery systems (HT-LMSNs-SS@DOX) were developed by loading drugs inside the pores of MSNs and conjugating with D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) and hyaluronic acid (HA) on the outer lipid surface. HT-LMSNs-SS and other carriers were characterized and assessed in terms of various characteristics. HT-LMSNs-SS@DOX exhibited a dual pH/reduction responsive drug release. The results also showed that modified LMSNs had good dispersity, biocompatibility, and drug-loading capacity. In vitro experiment results demonstrated that HT-LMSNs-SS were internalized by cells and mainly by clathrin-mediated endocytosis, with higher uptake efficiency than other carriers. Furthermore, HT-LMSNs-SS@DOX could effectively inhibit the expression of P-gp, increase the apoptosis ratios of MCF-7/ADR cells, and arrest cell cycle at the G0/G1 phase, with enhanced ability to induce excessive reactive oxygen species (ROS) production in cells. In tumor-bearing model mice, HT-LMSNs-SS@DOX similarly exhibited the highest inhibition activity against tumor growth, with good biosafety, among all of the treatment groups. Therefore, the nano-delivery systems developed herein achieve enhanced efficacy towards resistant tumors through targeted delivery and redox-responsive drug release, with broad application prospects.

Hyaluronic acid-coated liposomes for enhanced in vivo efficacy of neogambogic acid via active tumor cell targeting and prolonged systemic exposure

Neogambogic acid (NGA), which possesses a variety of anticancer activities, is visualized as an anticancer bioactive ingredient. However, the huge vascular stimulation, poor aqueous solubility, and short half-life restricted its clinical use. In this work, an effective nanocarrier was explored to reduce toxicity and enhance the tumor-targeted delivery. Two liposomal formulations, neogambogic acid liposomes (NGA-L), and hyaluronic acid-coated neogambogic acid liposomes (HA-NGA-L) were prepared and characterized with high encapsulation efficiency, slow pattern of drug release, narrow size distribution and higher stability. The cytotoxicity and cellular uptake of HA-NGA-L were higher than those of NGA-L in MDA-MB-231 cells (high CD44 expression), while no obvious differences in MCF-7 cells with (low CD44 expression), suggesting the CD44-mediated cellular internalization of hyaluronic acid-modified liposomes enhanced the cytotoxicity. Mechanistically, elevation of Bax and caspase-3 as well as downregulation of Bcl-2 led to cell apoptosis. Besides, the vascular stimulation and the hemolysis test indicated good safety of HA-NGA-L. In addition, HA-NGA-L was the effective nanocarrier to repress tumor proliferation in MDA-MB-231 tumor xenograft mouse through CD44 mediated active targeting without any obvious histopathological abnormities on major organs. Immunohistochemistry analysis revealed the enhanced elevation of Bax and caspase-3, and reduced expression of Bcl-2 contribute to apoptosis in tumors. Meanwhile, HA-NGA-L increased the AUC and t1/2 by 5.34-fold and 3.94-fold, respectively. In summary, the present study shows that HA-NGA-L may be safe and effective for the tumor-targeted delivery of neogambogic acid.

Nanographene-Au fine-tuning to intensify plasmonic-resonance of polymeric hybrid bionanosystem for synergistic phototherapy and nerve photobiomodulation

Here, we report the multi-photo-bioactivity of the plasmonic-nano graphitic coordinated polycaprolactone-based aligned nanofibrous scaffolds-based bionanosystem for photothermal breast and colon cancer therapies and peripheral nerve photobiomodulation. The size-optimized colloidal reduced graphene oxide (nRGO, 180 nm) nanosheets, for enhanced photothermal impact, were surface-functionalized with gold nanospheres (AuNPs) to prepare the nRGO@AuNP monodispersed nano-composite and then doped 2.0 mg of nRGO@AuNP in biocompatible and biodegradable polymer polycaprolactone (PCL) to fabricate the nRGO@AuNP-PCL (2.0 mg) plasmonic aligned nanofibrous scaffolds. More than 90% of cancer cells, breast cancer (MCF-7) as well as colon cancer (CT-26), ablated after 5 min of low NIR (808 nm) laser power (0.72 W/cm2) illumination with nRGO@AuNP-PCL (2.0 mg) aligned nanofibrous scaffolds. Besides, the nRGO@AuNP-PCL (2.0 mg) provided an extraordinary microenvironment for adhesion, nerve growth, proliferation, and differentiation of PC12 and S42 cells which mimics the natural extracellular matrix. The 2.5-fold increase in neurite length was observed with NIR illumination after 3 days whereas 1.7-fold was found without NIR illumination after 7 days in comparison to PCL (pure). The current findings will be useful to provide a new crucial approach for preparing biocompatible multifunctional composite plasmonic nanofibers as a highly efficient distinct platform for photothermal therapies and promising bioimplants to overcome the loss of sensation after cancer surgery through nerve photobiomodulation.

Red blood cell membrane-camouflaged gold-core silica shell nanorods for cancer drug delivery and photothermal therapy

Gold core mesoporous silica shell (AuMSS) nanorods are multifunctional nanomedicines that can act simultaneously as photothermal, drug delivery, and bioimaging agents. Nevertheless, it is reported that once administrated, nanoparticles can be coated with blood proteins, forming a protein corona, that directly impacts on nanomedicines' circulation time, biodistribution, and therapeutic performance. Therefore, it become crucial to develop novel alternatives to improve nanoparticles' half-life in the bloodstream. In this work, Polyethylenimine (PEI) and Red blood cells (RBC)-derived membranes were combined for the first time to functionalize AuMSS nanorods and simultaneously load acridine orange (AO). The obtained results revealed that the RBC-derived membranes promoted the neutralization of the AuMSS' surface charge and consequently improved the colloidal stability and biocompatibility of the nanocarriers. Indeed, the in vitro data revealed that PEI/RBC-derived membranes' functionalization also improved the nanoparticles' cellular internalization and was capable of mitigating the hemolytic effects of AuMSS and AuMSS/PEI nanorods. In turn, the combinatorial chemo-photothermal therapy mediated by AuMSS/PEI/RBC_AO nanorods was able to completely eliminate HeLa cells, contrasting with the less efficient standalone therapies. Such data reinforce the potential of AuMSS nanomaterials to act simultaneously as photothermal and chemotherapeutic agents.

Inorganic nanoparticles for photothermal treatment of cancer

In recent years, inorganic nanoparticles (NPs) have attracted increasing attention as potential theranostic agents in the field of oncology. Photothermal therapy (PTT) is a minimally invasive technique that uses nanoparticles to produce heat from light to kill cancer cells. PTT requires two essential elements: a photothermal agent (PTA) and near-infrared (NIR) radiation. The role of PTAs is to absorb NIR, which subsequently triggers hyperthermia within cancer cells. By raising the temperature in the tumor microenvironment (TME), PTT causes damage to the cancer cells. Nanoparticles (NPs) are instrumental in PTT given that they facilitate the passive and active targeting of the PTA to the TME, making them crucial for the effectiveness of the treatment. In addition, specific targeting can be achieved through their enhanced permeation and retention effect. Thus, owing to their significant advantages, such as altering the morphology and surface characteristics of nanocarriers comprised of PTA, NPs have been exploited to facilitate tumor regression significantly. This review highlights the properties of PTAs, the mechanism of PTT, and the results obtained from the improved curative efficacy of PTT by utilizing NPs platforms.

In situ formation of alginic acid-gold nanohybrids for application in cancer photothermal therapy

Gold-based nanoparticles present excellent optical properties that propelled their widespread application in biomedicine, from bioimaging to photothermal applications. Nevertheless, commonly employed manufacturing methods for gold-based nanoparticles require long periods and laborious protocols that reduce cost-effectiveness and scalability. Herein, a novel methodology was used for producing gold-alginic acid nanohybrids (Au-Alg-NH) with photothermal capabilities. This was accomplished by promoting the in situ reduction and nucleation of gold ions throughout a matrix of alginic acid by using ascorbic acid. The results obtained reveal that the Au-Alg-NHs present a uniform size distribution and a spike-like shape. Moreover, the nanomaterials were capable to mediate a temperature increase of ≈11°C in response to the irradiation with a near-infrared region (NIR) laser (808 nm, 1.7 W cm-2 ). The in vitro assays showed that Au-Alg-NHs were able to perform a NIR light-triggered ablation of cancer cells (MCF-7), being observed a reduction in the cell viability to ≈27%. Therefore, the results demonstrate that this novel methodology holds the potential for producing Au-Alg-NH with photothermal capacity and higher translatability to the clinical practice, namely for cancer therapy.

Sertaconazole-repurposed nanoplatform enhances lung cancer therapy via CD44-targeted drug delivery

BACKGROUND

Lung cancer is one of the most frequent causes of cancer-related deaths worldwide. Drug repurposing and nano-drug delivery systems are attracting considerable attention for improving anti-cancer therapy. Sertaconazole (STZ), an antifungal agent, has been reported to exhibit cytotoxicity against both normal and tumor cells, and its medical use is limited by its poor solubility. In order to overcome such shortcomings, we prepared a drug-repurposed nanoplatform to enhance the anti-tumor efficiency.

METHODS

Nanoplatform was prepared by thin film dispersion. Drug release studies and uptake studies were measured in vitro. Subsequently, we verified the tumor inhibition mechanisms of HTS NPs through apoptosis assay, immunoblotting and reactive oxygen species (ROS) detection analyses. Antitumor activity was evaluated on an established xenograft lung cancer model in vivo.

RESULTS

Our nanoplatform improved the solubility of sertaconazole and increased its accumulation in tumor cells. Mechanistically, HTS NPs was dependent on ROS-mediated apoptosis and pro-apoptotic autophagy to achieve their excellent anti-tumor effects. Furthermore, HTS NPs also showed strong inhibitory ability in nude mouse xenograft models without significant side effects.

CONCLUSIONS

Our results suggest that sertaconazole-repurposed nanoplatform provides an effective strategy for lung cancer treatment.

Hyaluronic Acid Modified Metal Nanoparticles and Their Derived Substituents for Cancer Therapy: A Review

The use of metal nanoparticles (M-NPs) in cancer therapy has gained significant consideration owing to their exceptional physical and chemical features. However, due to the limitations, such as specificity and toxicity towards healthy cells, their application in clinical translations has been restricted. Hyaluronic acid (HA), a biocompatible and biodegradable polysaccharide, has been extensively used as a targeting moiety, due to its ability to selectively bind to the CD44 receptors overexpressed on cancer cells. The HA-modified M-NPs have demonstrated promising results in improving specificity and efficacy in cancer therapy. This review discusses the significance of nanotechnology, the state of cancers, and the functions of HA-modified M-NPs, and other substituents in cancer therapy applications. Additionally, the role of various types of selected noble and non-noble M-NPs used in cancer therapy are described, along with the mechanisms involved in cancer targeting. Additionally, the purpose of HA, its sources and production processes, as well as its chemical and biological properties are described. In-depth explanations are provided about the contemporary applications of HA-modified noble and non-noble M-NPs and other substituents in cancer therapy. Furthermore, potential obstacles in optimizing HA-modified M-NPs, in terms of clinical translations, are discussed, followed by a conclusion and future prospects.

Gold nanostructure-mediated delivery of anticancer agents: Biomedical applications, reversing drug resistance, and stimuli-responsive nanocarriers

The application of nanoarchitectures in cancer therapy seems to be beneficial for the delivery of antitumor drugs. In recent years, attempts have been made to reverse drug resistance, one of the factors threatening the lives of cancer patients worldwide. Gold nanoparticles (GNPs) are metal nanostructures with a variety of advantageous properties, such as tunable size and shape, continuous release of chemicals, and simple surface modification. This review focuses on the application of GNPs for the delivery of chemotherapy agents in cancer therapy. Utilizing GNPs results in targeted delivery and increased intracellular accumulation. Besides, GNPs can provide a platform for the co-delivery of anticancer agents and genetic tools with chemotherapeutic compounds to exert a synergistic impact. Furthermore, GNPs can promote oxidative damage and apoptosis by triggering chemosensitivity. Due to their capacity for providing photothermal therapy, GNPs can enhance the cytotoxicity of chemotherapeutic agents against tumor cells. The pH-, redox-, and light-responsive GNPs are beneficial for drug release at the tumor site. For the selective targeting of cancer cells, surface modification of GNPs with ligands has been performed. In addition to improving cytotoxicity, GNPs can prevent the development of drug resistance in tumor cells by facilitating prolonged release and loading low concentrations of chemotherapeutics while maintaining their high antitumor activity. As described in this study, the clinical use of chemotherapeutic drug-loaded GNPs is contingent on enhancing their biocompatibility.

Intracellular Glucose-Depriving Polymer Micelles for Antiglycolytic Cancer Treatment

A new anticancer strategy to exploit abnormal metabolism of cancer cells rather than to merely control the drug release or rearrange the tumor microenvironment is reported. An antiglycolytic amphiphilic polymer, designed considering the unique metabolism of cancer cells (Warburg effect) and aimed at the regulation of glucose metabolism, is synthesized through chemical conjugation between glycol chitosan (GC) and phenylboronic acid (PBA). GC-PBA derivatives form stable micellar structures under physiological conditions and respond to changes in glucose concentration. Once the micelles accumulate at the tumor site, intracellular glucose capture occurs, and the resultant energy deprivation through the inhibition of aerobic glycolysis remarkably suppresses tumor growth without significant side effects in vivo. This strategy highlights the need to develop safe and effective cancer treatment without the use of conventional anticancer drugs.

Hyaluronic acid-coated gold nanoparticles as a controlled drug delivery system for poorly water-soluble drugs

Hyaluronic acid (HA) is a natural linear polysaccharide which has been widely used in cosmetics and pharmaceuticals including drug delivery systems because of its excellent biocompatibility. In this study, we investigated the one-pot synthesis of HA-coated gold nanoparticles (AuNP-HA) as a drug delivery carrier. The HAs with different molecular weights were produced by e-beam irradiation and employed as coating materials for AuNPs. Sulfasalazine (SSZ), a poorly water-soluble drug, was used to demonstrate the efficiency of drug delivery and the controlled release behaviour of the AuNP-HA. As the molecular weight of the HA decreased, the drug encapsulation efficiency of the SSZ increased up to 94%, while drug loading capacity of the SSZ was maintained at the level of about 70%. The prepared AuNP-HA-SSZ exhibited slow release of the SSZ over a short time and excellent sensitivity to different pHs and physiological conditions. The SSZ release rate was the lowest in simulated gastric conditions and the highest in simulated intestinal conditions. In this case, the AuNP-HA protects the SSZ from release under the acidic pH conditions in the stomach; on the other hand, the drug release was facilitated in the basic environment of the small intestine and colon. The SSZ was released under simulated intestinal conditions through anomalous drug transport and followed the Korsmeyer-Peppas model. Therefore, this study suggests that AuNP-HA is a promising orally-administered and intestine-targeted drug delivery system with controlled release characteristics.

Metal-Polymer Nanoconjugates Application in Cancer Imaging and Therapy

Metallic-based nanoparticles present a unique set of physicochemical properties that support their application in different fields, such as electronics, medical diagnostics, and therapeutics. Particularly, in cancer therapy, the plasmonic resonance, magnetic behavior, X-ray attenuation, and radical oxygen species generation capacity displayed by metallic nanoparticles make them highly promising theragnostic solutions. Nevertheless, metallic-based nanoparticles are often associated with some toxicological issues, lack of colloidal stability, and establishment of off-target interactions. Therefore, researchers have been exploiting the combination of metallic nanoparticles with other materials, inorganic (e.g., silica) and/or organic (e.g., polymers). In terms of biological performance, metal-polymer conjugation can be advantageous for improving biocompatibility, colloidal stability, and tumor specificity. In this review, the application of metallic-polymer nanoconjugates/nanohybrids as a multifunctional all-in-one solution for cancer therapy will be summarized, focusing on the physicochemical properties that make metallic nanomaterials capable of acting as imaging and/or therapeutic agents. Then, an overview of the main advantages of metal-polymer conjugation as well as the most common structural arrangements will be provided. Moreover, the application of metallic-polymer nanoconjugates/nanohybrids made of gold, iron, copper, and other metals in cancer therapy will be discussed, in addition to an outlook of the current solution in clinical trials.

Ciprofloxacin-Loaded Zein/Hyaluronic Acid Nanoparticles for Ocular Mucosa Delivery

Bacterial conjunctivitis is a worldwide problem that, if untreated, can lead to severe complications, such as visual impairment and blindness. Topical administration of ciprofloxacin is one of the most common treatments for this infection; however, topical therapeutic delivery to the eye is quite challenging. To tackle this, nanomedicine presents several advantages compared to conventional ophthalmic dosage forms. Herein, the flash nanoprecipitation technique was applied to produce zein and hyaluronic acid nanoparticles loaded with ciprofloxacin (ZeinCPX_HA NPs). ZeinCPX_HA NPs exhibited a hydrodynamic diameter of <200 nm and polydispersity index of <0.3, suitable for ocular drug delivery. In addition, the freeze-drying of the nanoparticles was achieved by using mannitol as a cryoprotectant, allowing their resuspension in water without modifying the physicochemical properties. Moreover, the biocompatibility of nanoparticles was confirmed by in vitro assays. Furthermore, a high encapsulation efficiency was achieved, and a release profile with an initial burst was followed by a prolonged release of ciprofloxacin up to 24 h. Overall, the obtained results suggest ZeinCPX_HA NPs as an alternative to the common topical dosage forms available on the market to treat conjunctivitis.

Gold Nanorods for Drug and Gene Delivery: An Overview of Recent Advancements

Over the past few decades, gold nanomaterials have shown great promise in the field of nanotechnology, especially in medical and biological applications. They have become the most used nanomaterials in those fields due to their several advantageous. However, rod-shaped gold nanoparticles, or gold nanorods (GNRs), have some more unique physical, optical, and chemical properties, making them proper candidates for biomedical applications including drug/gene delivery, photothermal/photodynamic therapy, and theranostics. Most of their therapeutic applications are based on their ability for tunable heat generation upon exposure to near-infrared (NIR) radiation, which is helpful in both NIR-responsive cargo delivery and photothermal/photodynamic therapies. In this review, a comprehensive insight into the properties, synthesis methods and toxicity of gold nanorods are overviewed first. For the main body of the review, the therapeutic applications of GNRs are provided in four main sections: (i) drug delivery, (ii) gene delivery, (iii) photothermal/photodynamic therapy, and (iv) theranostics applications. Finally, the challenges and future perspectives of their therapeutic application are discussed.

Gold-based hybrid nanostructures: more than just a pretty face for combinational cancer therapy

The early diagnosis together with an efficient therapy of cancer is essential to treat cancer patients and to enhance their quality of life. The use of nanostructures, as a newer technology, has demonstrated proven benefits as efficient cancer theranostic agents in numerous recent studies. Having a tunable surface plasmon resonance, gold nanostructures have been the subject of many recent studies as excellent imaging and photothermal therapy agents. However, the potential cytotoxicity and weak stability of gold nanostructures necessitate further modifications using biocompatible materials for biological applications. Based on the composition of the final structure, these gold-based hybrid nanostructures (GHNs) could be divided into five major groups; each of which has specific pros and cons. Understanding the strengths and weaknesses of each group helps scientists to optimize GHN designs with multiple functions by synergizing the benefits of different groups. This review aims to summarize the advancements in GHN design and provide a perspective view of future requirements for successful GHN-based targeted combinational cancer theranostic platforms.

Recent advances and trends in nanoparticles based photothermal and photodynamic therapy

Light-mediated therapies, including photodynamic therapy (PDT) and photothermal therapy (PTT) have been exploited as minimally invasive techniques for ablation of various tumors., Both modalities may eradicate tumors with minimal side effects to normal tissues and organs. Moreover, developments of light-mediated approaches using nanoparticles (NPs) and photosensitizer (PS) as diagnostic and therapeutic agents may have a crucial role in achieving successful cancer treatment. In recent years, novel nanoplatforms and strategies have been investigated to boost the therapeutic effect.. In this regard, gold, iron oxide, graphene oxide nanoparticles and hybrid nanocomposites have attracted attention.. Moreover, the combination of these materials with PS, in the form of hybrid NPs, reduces in vitro and in vivo normal tissue cytotoxicity, improves their solubility property in the biological environment and enhances the therapeutic effects. In this review, we look into the basic principles of PTT and PDT with their strengths and limitations to treat cancers. We also will discuss light-based nanoparticles and their PTT and PDT applications in the preclinical and clinical translation. Also, recent advances and trends in this field will be discussed along with the clinical challenges of PTT and PDT.

HA/PEI-coated acridine orange-loaded gold-core silica shell nanorods for cancer-targeted photothermal and chemotherapy

Aims: To develop a tumor-targeted chemo-photothermal nanomedicine through the functionalization of acridine orange (AO)-loaded gold-core mesoporous silica shell (AuMSS) nanorods with polyethylenimine (PEI) and hyaluronic acid (HA). Methods: Functionalization of the AuMSS nanorods was achieved through the chemical linkage of PEI followed by electrostatic adsorption of HA. Results: HA functionalization improved AuMSS' cytocompatibility by decreasing blood hemolysis, and PEI-HA inclusion promoted a controlled and sustained AO release. In vitro assays revealed that HA functionalization increased the internalization of nanoparticles by human negroid cervix epithelioid carcinoma cancer (HeLa) cells, and the combinatorial treatment mediated by AuMSS/PEI/HA_AO nanorods presented an enhanced effect, with >95% of cellular death. Conclusion: AuMSS/PEI/HA_AO formulations can act as tumor-targeted chemo-photothermal nanomedicines for the combinatorial therapy of cervical cancer.

IR780 loaded gelatin-PEG coated gold core silica shell nanorods for cancer-targeted photothermal/photodynamic therapy

Gold core silica shell (AuMSS) nanorods present excellent physicochemical properties that allow their application as photothermal and drug delivery agents. Herein, AuMSS nanorods were dual-functionalized with Polyethylene glycol methyl ether (PEG-CH₃ ) and Gelatin (GEL) to enhance both the colloidal stability and uptake by HeLa cancer cells. Additionally, the AuMSS nanorods were combined for the first time with IR780 (a heptamethine cyanine molecule) and its photothermal and photodynamic capacities were determined. The obtained results reveal that the encapsulation of IR780 (65 µg per AuMSS mg) increases the photothermal conversion efficiency of AuMSS nanorods by 10%, and this enhanced heat generation was maintained even after three irradiation cycles with a NIR (808 nm) laser. Moreover, the IR780-loaded AuMSS/T-PEG-CH₃ /T-GEL presented ≈2-times higher uptake in HeLa cells, when compared to the non-coated counterparts, and successfully mediated the light-triggered generation of reactive oxygen species. Overall, the combination of photodynamic and photothermal therapy mediated by IR780-loaded AuMSS/T-PEG-CH₃ /T-GEL nanorods effectively promoted the ablation of HeLa cancer cells.

Poly(2-ethyl-2-oxazoline) functionalized reduced graphene oxide: Optimization of the reduction process using dopamine and application in cancer photothermal therapy

The high near infrared (NIR) absorption displayed by reduced graphene oxide (rGO) nanostructures renders them a great potential for application in cancer photothermal therapy. However, the production of this material often relies on the use of hydrazine as a reductant, leading to poor biocompatibility and environmental-related issues. In addition, to improve rGO colloidal stability, this material has been functionalized with poly(ethylene glycol). However, recent studies have reported the immunogenicity of poly(ethylene glycol)-based coatings. In this work, the production of rGO, by using dopamine as the reducing agent, was optimized considering the size distribution and NIR absorption of the attained materials. The obtained results unveiled that the rGO produced by using a 1:5 graphene oxide:dopamine weight ratio and a reaction time of 4 h (termed as DOPA-rGO) displayed the highest NIR absorption while retaining its nanometric size distribution. Subsequently, the DOPA-rGO was functionalized with thiol-terminated poly(2-ethyl-2-oxazoline) (P-DOPA-rGO), revealing suitable physicochemical features, colloidal stability and cytocompatibility. When irradiated with NIR light, the P-DOPA-rGO could produce a temperature increase (ΔT) of 36 °C (75 μg/mL; 808 nm, 1.7 W/cm², 5 min). The photothermal therapy mediated by P-DOPA-rGO was capable of ablating breast cancer cells monolayers (viability < 3%) and could reduce heterotypic breast cancer spheroids' viability to just 30%. Overall, P-DOPA-rGO holds a great potential for application in breast cancer photothermal therapy.

Smart Vitamin Micelles as Cancer Nanomedicines for Enhanced Intracellular Delivery of Doxorubicin

Chemotherapy is one of the most effective treatments for cancer. However, intracellular delivery of many anticancer drugs is hindered by their hydrophobicity and low molecular weight. Here, we describe highly biocompatible and biodegradable amphiphilic vitamin conjugates comprising hydrophobic vitamin E and hydrophilic vitamin B labeled with dual pH and glutathione-responsive degradable linkages. Vitamin-based micelles (vitamicelles), formed by self-assembly in aqueous solutions, were optimized based on their stability after encapsulation of doxorubicin (DOX). The resulting vitamicelles have great potential as vehicles for anticancer drugs because they show excellent biocompatibility (>94% after 48 h of incubation) and rapid biodegradability (>90% after 2.5 h). Compared with free DOX, DOX-loaded vitamicelles showed a markedly enhanced anticancer effect as they released the drug rapidly and inhibited drug efflux out of cells efficiently. By exploiting these advantages, this study not only provides a promising strategy for circumventing existing challenges regarding the delivery of anticancer drugs but also extends the utility of current DOX-induced chemotherapy.

Near infrared photothermal conversion materials: mechanism, preparation, and photothermal cancer therapy applications

Photothermal therapy (PTT) has been widely applied in cancer therapy as a result of its non-invasive, localized treatment and good therapeutic effect. In general, the final therapeutic effect of PTT mainly depends on the photothermal materials, which can be further considered to be determined by the photothermal conversion efficiency, biocompatibility, and photothermal stability of photothermal materials. In this review, photothermal materials including inorganic materials, organic materials, and organic-inorganic composite materials in recent years have been summarized in terms of the mechanism, preparation, and cancer therapy applications. In the end, the perspectives and obstacles in their further development are overviewed.

Development of a multi-arm polyrotaxanes modified mesoporous silica-coated gold nanoplatform for protecting endothelial progenitor cells against high glucose environment

Recent study reported that endothelial progenitor cells (EPCs) have potential to treat diabetic macroangiopathy. High glucose environment of diabetes can affect the adhesion of EPCs by decreasing the expression of CXC chemokine receptor 4 (CXCR4) and affect the proliferation of EPCs by decreasing the expression of miR-126. The results showed that the cytotoxicity of GNR@MSNs@PEI to EPCs was significantly lower than PEI; the temperature of GNR@MSNs@PEI solution can be controlled between 38-40°C under 808 nm laser irradiation. 25.67 µg of pcDNA3.1-GFP-CXCR4 and 5.36 µg of FITC-miR-126 could be loaded in 1 mg of GNR@MSNs@PEI; GNR@MSNs@PEI has gene transfection almost the same as Lipofectamine 3000. Subsequent in vitro studies showed that pcDNA3.1-GFP-CXCR4 and miR-126 loaded GNR@MSNs@PEI can significantly increase the adhesion and proliferation and decrease the apoptosis of EPCs treated with high glucose under 808 nm laser irradiation. In conclusion, nano-carriers (GNR@MSNs@PEI) with high pcDNA3.1-CXCR4 and miR-126 loading capacity, high biocompatibility, well cell internalization, and controllable release ability were constructed to transfer CXCR4 expression plasmid (pcDNA3.1-CXCR4) and miR-126 into EPCs efficiently. Further in vitro studies indicated that pcDNA3.1-CXCR4 and miR-126-loaded GNR@MSNs@PEI could protect EPCs against high glucose-induced injury.

Optimization of the GSH-Mediated Formation of Mesoporous Silica-Coated Gold Nanoclusters for NIR Light-Triggered Photothermal Applications

Cancer light-triggered hyperthermia mediated by nanomaterials aims to eliminate cancer cells by inducing localized temperature increases to values superior to 42 °C, upon irradiation with a laser. Among the different nanomaterials with photothermal capacity, the gold-based nanoparticles have been widely studied due to their structural plasticity and advantageous physicochemical properties. Herein, a novel and straightforward methodology was developed to produce gold nanoclusters coated with mesoporous silica (AuMSS), using glutathione (GSH) to mediate the formation of the gold clusters. The obtained results revealed that GSH is capable of triggering and control the aggregation of gold nanospheres, which enhanced the absorption of radiation in the NIR region of the spectra. Moreover, the produced AuMSS nanoclusters mediated a maximum temperature increase of 20 °C and were able to encapsulate a drug model (acridine orange). In addition, these AuMSS nanoclusters were also biocompatible with both healthy (fibroblasts) and carcinogenic (cervical cancer) cells, at a maximum tested concentration of 200 μg/mL. Nevertheless, the AuMSS nanoclusters’ NIR light-triggered heat generation successfully reduced the viability of cervical cancer cells by about 80%. This confirms the potential of the AuMSS nanoclusters to be applied in cancer therapy, namely as theragnostic agents.

Recent advances in nanoparticles mediated photothermal therapy induced tumor regression

Photothermal therapy (PTT) is a minimally invasive procedure for treating cancer. The two significant prerequisites of PTT are the photothermal therapeutic agent (PTA) and near-infrared radiation (NIR). The PTA absorbs NIR, causing hyperthermia in the malignant cells. This increased temperature at the tumor microenvironment finally results in tumor cell damage. Nanoparticles play a crucial role in PTT, aiding in the passive and active targeting of the PTA to the tumor microenvironment. Through enhanced permeation and retention effect and surface-engineering, specific targeting could be achieved. This novel delivery tool provides the advantages of changing the shape, size, and surface attributes of the carriers containing PTAs, which might facilitate tumor regression significantly. Further, inclusion of surface engineering of nanoparticles is facilitated through ligating ligands specific to overexpressed receptors on the cancer cell surface. Thus, transforming nanoparticles grants the ability to combine different treatment strategies with PTT to enhance cancer treatment. This review emphasizes properties of PTAs, conjugated biomolecules of PTAs, and the combinatorial techniques for a better therapeutic effect of PTT using the nanoparticle platform.

Electrospun gold nanorods/graphene oxide loaded-core-shell nanofibers for local delivery of paclitaxel against lung cancer during photo-chemotherapy method

The combinations of photothermal therapy (PTT) and chemotherapy (CHT) have attracted increasing attention for cancer therapy. In the present study, paclitaxel as an anticancer drug and graphene oxide/gold nanorods (GO/Au NRs) were simultaneously loaded into the poly (tetramethylene ether) glycol based-polyurethane (PTMG-PU) (core)/chitosan (shell) nanofibers prepared by the coaxial electrospinning method. The potential of the synthesized nanofiber as a pH/temperature dual responsive carrier was investigated for the controlled release of paclitaxel against A549 lung cancer during PTT/CHT combined method. The synthesized core-shell nanofibers were characterized using SEM, TEM and XRD analysis. The drug encapsulation efficiency, drug release and kinetic studies were carried out. The compatibility of the synthesized core-shell nanofibers was also investigated. The cell viability of the synthesized nanofibers treated with A549 lung cancer cells was investigated under alone CHT, alone PTT and PTT/CHT method. The in vivo studies indicated that the PTT/CHT method demonstrated an optimal therapeutic effect on tumor inhibition without change in body weight. The obtained results demonstrated that the synthesized core-shell nanofibers would be used for lung cancer treatment under NIR irradiation in the future.

Development of gold nanorods for cancer treatment

There has been growing interest in the application of gold nanorods (GNRs) to tumor therapy due to the unique properties they possess. In the past, GNRs were not used in clinical treatments as they lacked stability in vivo and were characterized by potential toxicity. Despite these issues, the significant potential for utilizing GNRs to conduct safe and effective treatments for tumors cannot be ignored. Therefore, it remains crucial to thoroughly investigate the mechanisms behind the toxicity of GNRs in order to provide the means of overcoming obstacles to its full application in the future. This review presents the toxic effects of GNRs, the factors affecting toxicity and the methods to improve biocompatibility, all of which are presently being studied. Finally, we conclude by briefly discussing the current research status of GNRs and provide additional perspective on the challenges involved along with the course of development for GNRs in the future.

Combinatorial delivery of doxorubicin and acridine orange by gold core silica shell nanospheres functionalized with poly(ethylene glycol) and 4-methoxybenzamide for cancer targeted therapy

Combinatorial therapies based on the simultaneous administration of multiple drugs can lead to synergistic effects, increasing the efficacy of the cancer therapy. However, it is crucial to develop new delivery systems that can increase the drugs' therapeutic selectivity and efficacy. Gold core silica shell (AuMSS) nanoparticles present physicochemical properties that allow their simultaneous application as drug delivery and imaging agents. Herein, poly(ethylene glycol) was modified with 4-methoxybenzamide and 3-(triethoxysilyl)propyl isocyanate (TPANIS) to create a novel surface functionalization capable of improving the colloidal stability and specificity of AuMSS nanospheres towards cancer cells. Moreover, a dual drug combination based on Doxorubicin (DOX) and Acridine orange (AO) was characterized and administered using the AuMSS-TPANIS nanospheres. The obtained results show that the DOX:AO drug combination can mediate a synergistic therapeutic effect in both HeLa and MCF-7 cells, particularly at the 2:1, 1:1, and 1:2 ratios. Additionally, the TPANIS functionalization increased the AuMSS nanospheres colloidal stability and selectivity towards MCF-7 cancer cells (overexpressing sigma receptors). Such also resulted in an enhanced cytotoxic effect against MCF-7 cells when administering the DOX:AO drug combination with the AuMSS-TPANIS nanospheres. Overall, the obtained results confirm the therapeutic potential of the DOX:AO drug combination as well as the targeting capacity of AuMSS-TPANIS, supporting its application in the cancer-targeted combinatorial chemotherapy.

Sulfobetaine methacrylate-albumin-coated graphene oxide incorporating IR780 for enhanced breast cancer phototherapy

Aim: Enhance the colloidal stability and photothermal capacity of graphene oxide (GO) by functionalizing it with sulfobetaine methacrylate (SBMA)-grafted bovine serum albumin (BSA; i.e., SBMA-g-BSA) and by loading IR780, respectively. Materials & methods: SBMA-g-BSA coating and IR780 loading into GO was achieved through a simple sonication process. Results: SBMA-g-BSA-functionalized GO (SBMA-BSA/GO) presented an adequate size distribution and cytocompatibility. When in contact with biologically relevant media, the size of the SBMA-BSA/GO only increased by 8%. By loading IR780 into SBMA-BSA/GO, its photothermal capacity increased by twofold. The combination of near infrared light with SBMA-BSA/GO did not induce photocytotoxicity on breast cancer cells. In contrast, the interaction of IR780-loaded SBMA-BSA/GO with near infrared light caused the ablation of cancer cells. Conclusion: IR780-loaded SBMA-BSA/GO displayed an improved colloidal stability and phototherapeutic capacity.

Solutions to the Drawbacks of Photothermal and Photodynamic Cancer Therapy

Phototherapy such as photothermal therapy and photodynamic therapy in cancer treatment has been developed quickly over the past few years for its noninvasive nature and high efficiency. However, there are still many drawbacks in phototherapy that prevent it from clinical applications. Thus, scientists have designed different systems to overcome the issues associated with phototherapy, including enhancing the targeting ability of phototherapy, low-temperature photothermal therapy, replacing near-infrared light with other excitation sources, and so on. This article discusses the problems and shortcomings encountered in the development of phototherapy and highlights possible solutions to address them so that phototherapy may become a useful cancer treatment approach in clinical practice. This article aims to give a brief summary about current research advancements in phototherapy research and provides a quick guideline toward future developments in the field.

3D-printed microneedles in biomedical applications

Conventional needle technologies can be advanced with emerging nano- and micro-fabrication methods to fabricate microneedles. Nano-/micro-fabricated microneedles seek to mitigate penetration pain and tissue damage, as well as providing accurately controlled robust channels for administrating bioagents and collecting body fluids. Here, design and 3D printing strategies of microneedles are discussed with emerging applications in biomedical devices and healthcare technologies. 3D printing offers customization, cost-efficiency, a rapid turnaround time between design iterations, and enhanced accessibility. Increasing the printing resolution, the accuracy of the features, and the accessibility of low-cost raw printing materials have empowered 3D printing to be utilized for the fabrication of microneedle platforms. The development of 3D-printed microneedles has enabled the evolution of pain-free controlled release drug delivery systems, devices for extracting fluids from the cutaneous tissue, biosignal acquisition, and point-of-care diagnostic devices in personalized medicine.

Strategies for the functionalisation of gold nanorods to reduce toxicity and aid clinical translation

Gold nanorods (GNRs) show great promise as photothermal therapy agents due to their remarkable ability to convert light into heat. In most cases, gold nanorods are synthesised via a seed-mediated method assisted by surfactants. However, the toxicity of these surfactants, principally cetrimonium ions, has prevented GNRs from being used more widely in vivo. To address this issue, various detoxification and functionalisation approaches have been proposed in recent years to replace or cover surfactant coatings on the gold surface. In this short review, the advantages and limitations of each approach are examined in the context of the recent progress made towards the design of GNRs suitable for use in the body.

Polydopamine-based nanomaterials and their potentials in advanced drug delivery and therapy

Polydopamine (PDA) has shown great potentials in biomedical fields due largely to its unique physicochemical properties, including high photothermal transfer efficiency, excellent drug binding capacity, versatile adhesion ability, sensitive pH responsibility and great biocompatibility and biodegradability. These properties confer PDA-based nanoparticles the potentials either as the drug carriers for advanced drug delivery or as the bioactive agents for photothermal therapy, imaging and biosensing. This review aims to provide a comprehensive understanding of PDA, its polymerization mechanisms and the potentials of PDA-based nano-systems in treating various diseases, including cancer, diabetes, inflammation, bacterial infection and Parkinson's disease. In addition, the concerns of PDA in biomedical use are also discussed.

Strategies to improve the photothermal capacity of gold-based nanomedicines

The plasmonic photothermal properties of gold nanoparticles have been widely explored in the biomedical field to mediate a photothermal effect in response to the irradiation with an external light source. Particularly, in cancer therapy, the physicochemical properties of gold-based nanomaterials allow them to efficiently accumulate in the tumor tissue and then mediate the light-triggered thermal destruction of cancer cells with high spatial-temporal control. Nevertheless, the gold nanomaterials can be produced with different shapes, sizes, and organizations such as nanospheres, nanorods, nanocages, nanoshells, and nanoclusters. These gold nanostructures will present different plasmonic photothermal properties that can impact cancer thermal ablation. This review analyses the application of gold-based nanomaterials in cancer photothermal therapy, emphasizing the main parameters that affect its light-to-heat conversion efficiency and consequently the photothermal potential. The different shapes/organizations (clusters, shells, rods, stars, cages) of gold nanomaterials and the parameters that can be fine-tuned to improve the photothermal capacity are presented. Moreover, the gold nanostructures combination with other materials (e.g. silica, graphene, and iron oxide) or small molecules (e.g. indocyanine green and IR780) to improve the nanomaterials photothermal capacity is also overviewed.

Agricultural and Biomedical Applications of Chitosan-Based Nanomaterials

Chitosan has emerged as a biodegradable, nontoxic polymer with multiple beneficial applications in the agricultural and biomedical sectors. As nanotechnology has evolved as a promising field, researchers have incorporated chitosan-based nanomaterials in a variety of products to enhance their efficacy and biocompatibility. Moreover, due to its inherent antimicrobial and chelating properties, and the availability of modifiable functional groups, chitosan nanoparticles were also directly used in a variety of applications. In this review, the use of chitosan-based nanomaterials in agricultural and biomedical fields related to the management of abiotic stress in plants, water availability for crops, controlling foodborne pathogens, and cancer photothermal therapy is discussed, with some insights into the possible mechanisms of action. Additionally, the toxicity arising from the accumulation of these nanomaterials in biological systems and future research avenues that had gained limited attention from the scientific community are discussed here. Overall, chitosan-based nanomaterials show promising characteristics for sustainable agricultural practices and effective healthcare in an eco-friendly manner.

Electrosprayed Ultra-Thin Coating of Ethyl Cellulose on Drug Nanoparticles for Improved Sustained Release

In nanopharmaceutics, polymeric coating is a popular strategy for modifying the drug release kinetics and, thus, new methods for implementing the nanocoating processes are highly desired. In the present study, a modified coaxial electrospraying process was developed to formulate an ultra-thin layer of ethyl cellulose (EC) on a medicated composite core consisting of tamoxifen citrate (TAM) and EC. A traditional single-fluid blending electrospraying and its monolithic EC-TAM nanoparticles (NPs) were exploited to compare. The modified coaxial processes were demonstrated to be more continuous and robust. The created NPs with EC coating had a higher quality than the monolithic ones in terms of the shape, surface smoothness, and the uniform size distribution, as verified by the SEM and TEM results. XRD patterns suggested that TAM presented in all the NPs in an amorphous state thanks to the fine compatibility between EC and TAM, as indicated by the attenuated total reflection (ATR)-FTIR spectra. In vitro dissolution tests demonstrated that the NPs with EC coating required a time period of 7.58 h, 12.79 h, and 28.74 h for an accumulative release of 30%, 50%, and 90% of the loaded drug, respectively. The protocols reported here open a new way for developing novel medicated nanoparticles with functional coating.

Gene Therapy in Cancer Treatment: Why Go Nano?

The proposal of gene therapy to tackle cancer development has been instrumental for the development of novel approaches and strategies to fight this disease, but the efficacy of the proposed strategies has still fallen short of delivering the full potential of gene therapy in the clinic. Despite the plethora of gene modulation approaches, e.g., gene silencing, antisense therapy, RNA interference, gene and genome editing, finding a way to efficiently deliver these effectors to the desired cell and tissue has been a challenge. Nanomedicine has put forward several innovative platforms to overcome this obstacle. Most of these platforms rely on the application of nanoscale structures, with particular focus on nanoparticles. Herein, we review the current trends on the use of nanoparticles designed for cancer gene therapy, including inorganic, organic, or biological (e.g., exosomes) variants, in clinical development and their progress towards clinical applications.