Genetic engineering to enhance mercury phytoremediation

Tailored bacteria tackling with environmental mercury: Inspired by natural mercuric detoxification operons

Mercury (Hg) and its inorganic and organic compounds significantly threaten the ecosystem and human health. However, the natural and anthropogenic Hg environmental inputs exceed 5000 metric tons annually. Hg is usually discharged in elemental or ionic forms, accumulating in surface water and sediments where Hg-methylating microbes-mediated biotransformation occurs. Microbial genetic factors such as the mer operon play a significant role in the complex Hg biogeochemical cycle. Previous reviews summarize the fate of environmental Hg, its biogeochemistry, and the mechanism of bacterial Hg resistance. This review mainly focuses on the mer operon and its components in detecting, absorbing, bioaccumulating, and detoxifying environmental Hg. Four components of the mer operon, including the MerR regulator, divergent mer promoter, and detoxification factors MerA and MerB, are rare bio-parts for assembling synthetic bacteria, which tackle pollutant Hg. Bacteria are designed to integrate synthetic biology, protein engineering, and metabolic engineering. In summary, this review highlights that designed bacteria based on the mer operon can potentially sense and bioremediate pollutant Hg in a green and low-cost manner.

Abscisic acid alleviates mercury toxicity in wheat (Triticum aestivum L.) by promoting cell wall formation

Mercury (Hg) is a heavy metal (HM) that affects crop growth and productivity. In a previous study, we found that application of exogenous abscisic acid (ABA) alleviated growth inhibition in Hg-stressed wheat seedlings. However, the physiological and molecular mechanisms underlying ABA-mediated Hg detoxification remained unclear. In this study, Hg exposure reduced the plant fresh and dry weights and root numbers. Exogenous ABA treatment significantly resumed the plant growth, increased the plant height and weight, and enriched the roots numbers and biomass. The application of ABA enhanced Hg absorption and raised the Hg levels in the roots. In addition, exogenous ABA decreased Hg-induced oxidative damage and significantly brought down the activities of antioxidant enzymes, such as SOD, POD and CAT. Global gene expression patterns in the roots and leaves exposed to HgCl₂ and ABA treatments were examined via RNA-Seq. The data showed that genes related to ABA-mediated Hg detoxification were enriched in functions related to cell wall formation. Weighted gene co-expression network analysis (WGCNA) further indicated that the genes implicated in Hg detoxification were related to cell wall synthesis. Under Hg stress, ABA significantly induced expression of the genes encoding cell wall synthesis enzymes, regulated the activity of hydrolase, and increased the concentrations of cellulose and hemicellulose, hence promoting cell wall synthesis. Taken together, these results suggest that exogenous ABA could alleviate Hg toxicity in wheat by promoting cell wall formation and suppressing translocation of Hg from roots to shoots.

Advances in bacterial whole-cell biosensors for the detection of bioavailable mercury: A review

Mercury (Hg) and its organic compounds, especially monomethylmercury (MeHg), cause major damage to the ecosystem and human health. In surface water or sediments, microorganisms play a crucial role in the methylation and demethylation of Hg. Given that Hg transformation processes are intracellular reactions, accurate assessment of the bioavailability of Hg(II)/MeHg in the environment, particularly for microorganisms, is of major importance. Compared with traditional analytical methods, bacterial whole-cell biosensors (BWCBs) provide a more accurate, convenient, and cost-effective strategy to assess the environmental risks of Hg(II)/MeHg. This Review summarizes recent progress in the application of BWCBs in the detection of bioavailable Hg(II)/MeHg, providing insight on current challenges and strategies. The principle and components of BWCBs for Hg(II)/MeHg bioavailability analysis are introduced. Furthermore, the impact of water chemical factors on the bioavailability of Hg is discussed as are future perspectives of BWCBs in bioavailable Hg analysis and optimization of BWCBs.

Critical review on biogeochemical dynamics of mercury (Hg) and its abatement strategies

Mercury (Hg) is among the naturally occurring heavy metal with elemental, organic, and inorganic distributions in the environment. Being considered a global pollutant, high pools of Hg-emissions ranging from >6000 to 8000 Mg Hg/year get accumulated by the natural and anthropogenic activities in the atmosphere. These toxicants have high persistence, toxicity, and widespread contamination in the soil, water, and air resources. Hg accumulation inside the plant parts amplifies the traces of toxic elements in the linking food chains, leads to Hg exposure to humans, and acts as a potential genotoxic, neurotoxic and carcinogenic entity. However, excessive Hg levels are equally toxic to the plant system and severely disrupt the physiological and metabolic processes in plants. Thus, a plausible link between Hg-concentration and its biogeochemical behavior is highly imperative to analyze the plant-soil interactions. Therefore, it is requisite to bring these toxic contaminants in between the acceptable limits to safeguard the environment. Plants efficiently incorporate or absorb the bioavailable Hg from the soil thus a constructive understanding of Hg uptake, translocation/sequestration involving specific heavy metal transporters, and detoxification mechanisms are drawn. Whereas recent investigations in biological remediation of Hg provide insights into the potential associations between the plants and microbes. Furthermore, intense research on Hg-induced antioxidants, protein networks, metabolic mechanisms, and signaling pathways is required to understand these bioremediations techniques. This review sheds light on the mercury (Hg) sources, pollution, biogeochemical cycles, its uptake, translocation, and detoxification methods with respect to its molecular approaches in plants.

A Green Approach Used for Heavy Metals 'Phytoremediation' Via Invasive Plant Species to Mitigate Environmental Pollution: A Review

Heavy metals (HMs) normally occur in nature and are rapidly released into ecosystems by anthropogenic activities, leading to a series of threats to plant productivity as well as human health. Phytoremediation is a clean, eco-friendly, and cost-effective method for reducing soil toxicity, particularly in weedy plants (invasive plant species (IPS)). This method provides a favorable tool for HM hyperaccumulation using invasive plants. Improving the phytoremediation strategy requires a profound knowledge of HM uptake and translocation as well as the development of resistance or tolerance to HMs. This review describes a comprehensive mechanism of uptake and translocation of HMs and their subsequent detoxification with the IPS via phytoremediation. Additionally, the improvement of phytoremediation through advanced biotechnological strategies, including genetic engineering, nanoparticles, microorganisms, CRISPR-Cas9, and protein basis, is discussed. In summary, this appraisal will provide a new platform for the uptake, translocation, and detoxification of HMs via the phytoremediation process of the IPS.

Demethylation─The Other Side of the Mercury Methylation Coin: A Critical Review

The public and environmental health consequences of mercury (Hg) methylation have drawn much attention and considerable research to Hg methylation processes and their dynamics in diverse environments and under a multitude of conditions. However, the net methylmercury (MeHg) concentration that accumulates in the environment is equally determined by the rate of MeHg degradation, a complex process mediated by a variety of biotic and abiotic mechanisms, about which our knowledge is limited. Here we review the current knowledge on MeHg degradation and its potential pathways and mechanisms. We describe detoxification by resistant microorganisms that employ the Hg resistance (mer) system to reductively break the carbon-mercury (C-Hg) bond producing methane (CH₄) and inorganic mercuric Hg(II), which is then reduced by the mercuric reductase to elemental Hg(0). Very recent research has begun to elucidate a mechanism for the long-recognized mer-independent oxidative demethylation, likely involving some strains of anaerobic bacteria as well as aerobic methane-oxidizing bacteria, i.e., methanotrophs. In addition, photochemical and chemical demethylation processes are described, including the roles of dissolved organic matter (DOM) and free radicals as well as dark abiotic demethylation in the natural environment about which little is currently known. We focus on mechanisms and processes of demethylation and highlight the uncertainties and known effects of environmental factors leading to MeHg degradation. Finally, we suggest future research directions to further elucidate the chemical and biochemical mechanisms of biotic and abiotic demethylation and their significance in controlling net MeHg production in natural ecosystems.

Is Genetic Engineering a Route to Enhance Microalgae-Mediated Bioremediation of Heavy Metal-Containing Effluents?

Contamination of the biosphere by heavy metals has been rising, due to accelerated anthropogenic activities, and is nowadays, a matter of serious global concern. Removal of such inorganic pollutants from aquatic environments via biological processes has earned great popularity, for its cost-effectiveness and high efficiency, compared to conventional physicochemical methods. Among candidate organisms, microalgae offer several competitive advantages; phycoremediation has even been claimed as the next generation of wastewater treatment technologies. Furthermore, integration of microalgae-mediated wastewater treatment and bioenergy production adds favorably to the economic feasibility of the former process-with energy security coming along with environmental sustainability. However, poor biomass productivity under abiotic stress conditions has hindered the large-scale deployment of microalgae. Recent advances encompassing molecular tools for genome editing, together with the advent of multiomics technologies and computational approaches, have permitted the design of tailor-made microalgal cell factories, which encompass multiple beneficial traits, while circumventing those associated with the bioaccumulation of unfavorable chemicals. Previous studies unfolded several routes through which genetic engineering-mediated improvements appear feasible (encompassing sequestration/uptake capacity and specificity for heavy metals); they can be categorized as metal transportation, chelation, or biotransformation, with regulation of metal- and oxidative stress response, as well as cell surface engineering playing a crucial role therein. This review covers the state-of-the-art metal stress mitigation mechanisms prevalent in microalgae, and discusses putative and tested metabolic engineering approaches, aimed at further improvement of those biological processes. Finally, current research gaps and future prospects arising from use of transgenic microalgae for heavy metal phycoremediation are reviewed.

Phytoremediation of Toxic Metals: A Sustainable Green Solution for Clean Environment

Contamination of aquatic ecosystems by various sources has become a major worry all over the world. Pollutants can enter the human body through the food chain from aquatic and soil habitats. These pollutants can cause various chronic diseases in humans and mortality if they collect in the body over an extended period. Although the phytoremediation technique cannot completely remove harmful materials, it is an environmentally benign, cost-effective, and natural process that has no negative effects on the environment. The main types of phytoremediation, their mechanisms, and strategies to raise the remediation rate and the use of genetically altered plants, phytoremediation plant prospects, economics, and usable plants are reviewed in this review. Several factors influence the phytoremediation process, including types of contaminants, pollutant characteristics, and plant species selection, climate considerations, flooding and aging, the effect of salt, soil parameters, and redox potential. Phytoremediation’s environmental and economic efficiency, use, and relevance are depicted in our work. Multiple recent breakthroughs in phytoremediation technologies are also mentioned in this review.

Mechanisms underlying mercury detoxification in soil-plant systems after selenium application: a review

Feasible countermeasures to mitigate mercury (Hg) accumulation and its deleterious effects on crops are urgently needed worldwide. Selenium (Se) fertilizer application is a cost-effective strategy to reduce Hg concentrations, promote agro-environmental sustainability and food safety, and decrease the public health risk posed by Hg-contaminated soils and its accumulation in food crops. This holistic review focuses on the processes and detoxification mechanisms of Hg in whole soil-plant systems after Se application. The reduction of Hg bioavailability in soil, the formation of inert HgSe or/and HgSe-containing proteinaceous complexes in the rhizosphere and/or roots, and the reduction of plant root uptake and translocation of Hg in plant after Se application are systemically discussed. In addition, the positive responses in plant physiological and biochemical processes to Se application under Hg stress are presented to show the possible mechanisms for protecting the plant. However, application of high levels Se showed synergistic toxic effect with Hg and inhibited plant growth. The effectiveness of Se application methods, rates, and species on Hg detoxification is compared. This review provides a good approach for plant production in Hg-contaminated areas to meet food security demands and reduce the public health risk.

Metal and metal(loids) removal efficiency using genetically engineered microbes: Applications and challenges

The environment is being polluted in different many with metal and metalloid pollution, mostly due to anthropogenic activity, which is directly affecting human and environmental health. Metals and metalloids are highly toxic at low concentrations and contribute primarily to the survival equilibrium of activities in the environment. However, because of non-degradable, they persist in nature and these metal and metalloids bioaccumulate in the food chain. Genetically engineered microorganisms (GEMs) mediated techniques for the removal of metals and metalloids are considered an environmentally safe and economically feasible strategy. Various forms of GEMs, including fungi, algae, and bacteria have been produced by recombinant DNA and RNA technologies, which have been used to eliminate metal and metalloids compounds from the polluted areas. Besides, GEMs have the potentiality to produce enzymes and other metabolites that are capable of tolerating metals stress and detoxify the pollutants. Thus, the aim of this review is to discuss the use of GEMs as advanced tools to produce metabolites, signaling molecules, proteins through genetic expression during metal and metalloids interaction, which help in the breakdown of persistent pollutants in the environment.

Transcription profiling-guided remodeling of sulfur metabolism in synthetic bacteria for efficiently capturing heavy metals

Heavy metal contamination is becoming a global problem threatening human health. Heavy metal removal by engineered microbes by cellular adsorption and uptake is a promising strategy for treatment of heavy metal contamination. However, this strategy is confronted with limited heavy metal-capturing elements. In this study, we performed a transcription profiling-guided strategy for construction of heavy metal-capturing synthetic bacteria. Transcription profiling of a heavy metal-tolerating Cupriavidus taiwanensis strain revealed up-regulation of sulfur metabolism-related operons (e.g., iscSAU and moaEDAB) by Pb²⁺ and Cd²⁺. A synthetic Escherichia coli strain, EcSSMO, was constructed by design of a synthetic sulfur metabolism operon (SSMO) based on iscSAU/moaEDAB. Biochemical analysis and X-ray photoelectron spectroscopy (XPS) revealed that the synthetic bacteria had remodeled sulfur metabolism and enhanced heavy metal-tolerating capacity, with higher surviving EcSSMO cells than the surviving control cells Ec0 (not containing SSMO) at 50 mg/L of Pb²⁺ and Cd²⁺ (>92 % versus <10 %). Moreover, EcSSMO exhibited much higher heavy metal-capturing capacity than Ec0, removing>90 % of Pb²⁺ and Cd²⁺ at 5 mg/L of Pb²⁺ and Cd²⁺, and >40 % of both heavy metals even at 50 mg/L of Pb²⁺ and Cd²⁺. This study reveals emphasizes feasibility of transcription profiling-guided construction of synthetic organisms by large-scale remodeling metabolic network.

A review on phytoremediation of mercury contaminated soils

Mercury (Hg) and its compounds are one of the most dangerous environmental pollutants and Hg pollution exists in soils in different degrees over the world. Phytoremediation of Hg-contaminated soils has attracted increasing attention for the advantages of low investment, in-situ remediation, potential economic benefits and so on. Searching for the hyperaccumulator of Hg and its application in practice become a research hotspot. In this context, we review the current literatures that introduce various experimental plant species for accumulating Hg and aided techniques improving the phytoremediation of Hg-contaminated soils. Experimental plant species for accumulating Hg and accumulation or translocation factor of Hg are listed in detail. The translocation factor (TF) is greater than 1.0 for some plant species, however, the bioaccumulation factor (BAF) is greater than 1.0 for Axonopus compressus only. Plant species, soil properties, weather condition, and the bioavailability and heterogeneity of Hg in soils are the main factors affecting the phytoremediation of Hg-contaminated soils. Chemical accelerator kinds and promoting effect of chemical accelerators for accumulating and transferring Hg by various plant species are also discussed. Potassium iodide, compost, ammonium sulphate, ammonium thiosulfate, sodium sulfite, sodium thiosulfate, hydrochloric acid and sulfur fertilizer may be selected to promote the absorption of Hg by plants. The review introduces transgenic gene kinds and promoting effect of transgenic plants for accumulating and transferring Hg in detail. Some transgenic plants can accumulate more Hg than non-transgenic plants. The composition of rhizosphere microorganisms of remediation plants and the effect of rhizosphere microorganisms on the phytoremediation of Hg-contaminated soils are also introduced. Some rhizosphere microorganisms can increase the mobility of Hg in soils and are beneficial for the phytoremediation.

Cadmium transport activity of four mercury transporters (MerC, MerE, MerF and MerT) and effects of the periplasmic mercury-binding protein MerP on Mer-dependent cadmium uptake

Mercury superfamily proteins, i.e. inner membrane-spanning proteins (MerC, MerE, MerF and MerT) and a periplasmic mercury-binding protein (MerP), transport mercury into the cytoplasm. A previous study demonstrated that a Mer transporter homolog exhibits cadmium transport activity; based on this, the present study aimed to evaluate the cadmium transport activity of MerC, MerE, MerF and MerT and the effects of MerP co-expression in Escherichia coli. Bacteria expressing MerC, MerE, MerF or MerT without MerP were more sensitive to cadmium and significantly absorbed more cadmium than did the control strain. Expression of MerP in combination with MerC, MerE, MerF or MerT increased the bacterial sensitivity to cadmium and cadmium accumulation compared to a single expression of MerC, MerE, MerF or MerT. Cadmium uptake mediated by MerC, MerE, MerF or MerT was inhibited under cold or acidic conditions. These findings suggest that MerC, MerE, MerF and MerT are broad-spectrum heavy metal transporters that mediate both mercury and cadmium transport into cells and that MerP accelerates the cadmium transport ability of MerC, MerE, MerF and MerT.

Mercury in rice paddy fields and how does some agricultural activities affect the translocation and transformation of mercury - A critical review

Human exposure to methylmercury (MeHg) through rice consumption is raising health concerns. It has long been recognized that MeHg found in rice grain predominately originated from paddy soil. Anaerobic conditions in paddy fields promote Hg methylation, potentially leading to high MeHg concentrations in rice grain. Understanding the transformation and migration of Hg in the rice paddy system, as well as the effects of farming activities, are keys to assessing risks and developing potential mitigation strategies. Therefore, this review examines the current state of knowledge on: 1) sources of Hg in paddy fields; 2) how MeHg and inorganic Hg (IHg) are transformed (including abiotic and biotic processes); 3) how IHg and MeHg enter and translocate in rice plants; and 4) how regular farming activities (including the application of fertilizer, cultivation methods, choice of cultivar), affect Hg cycling in the paddy field system. Current issues and controversies on Hg transformation and migration in the paddy field system are also discussed.

Biotransformation of xenobiotics by hairy roots

The exponential industrial growth we see today rides on the back of large scale production of chemicals, explosives and pharmaceutical products. However, the effluents getting released from their manufacturing units are greatly compromising the sustainability of our environment. With greater awareness of the imperative for environmental clean-up, a promising approach that is attracting increasing research interests is biodegradation of xenobiotics. In this approach, biotransformation has proven to be one of the most effective tools. While many different model frameworks have been used to study different aspects of biotransformation, hairy roots (HRs) have been found to be exceptionally valuable. HR cultures are preferred over other in-vitro model systems due to their biochemical stability and hormone-autotrophy. In addition, the multi-enzyme biosynthetic potential of HRs which is similar to the parent plant and their relatively low-cost cultural requirements further characterize their suitability for biotransformation. The recent progress observed in scale-up of HR cultures and understanding of functional genomics has opened up new dimensions providing valuable insights for industrial application. This review article summarizes the potential of HR cultures in the biotransformation of xenobiotics, their limitations in the application on a large scale and current strategies to alleviate them. Advancement in bioreactors engineering enabling large scale cultivation and modern gene technologies improving biotransformation efficiency promises to extend laboratory results to industrial applications.

Ectopic expression of a bacterial mercury transporter MerC in root epidermis for efficient mercury accumulation in shoots of Arabidopsis plants

For mercury phytoextraction, we previously demonstrated in Arabidopsis thaliana that a constitutive and ubiquitous promoter-driven expression of a bacterial mercury transporter MerC fused with SYP121, a plant SNARE for plasma membrane protein trafficking increases plant mercury accumulation. To advance regulation of ectopic expression of the bacterial transporter in the plant system, the present study examined whether merC-SYP121 expression driven by a root epidermis specific promoter (pEpi) is sufficient to enhance mercury accumulation in plant tissues. We generated five independent transgenic Arabidopsis plant lines (hereafter pEpi lines) expressing a transgene encoding MerC-SYP121 N-terminally tagged with a fluorescent protein mTRQ2 under the control of pEpi, a root epidermal promoter. Confocal microscopy analysis of the pEpi lines showed that mTRQ2-MerC-SYP121 was preferentially expressed in lateral root cap in the root meristematic zone and epidermal cells in the elongation zone of the roots. Mercury accumulation in shoots of the pEpi lines exposed to inorganic mercury was overall higher than the wild-type and comparable to the over-expressing line. The results suggest that cell-type specific expression of the bacterial transporter MerC in plant roots sufficiently enhances mercury accumulation in shoots, which could be a useful phenotype for improving efficiency of mercury phytoremediation.

Phytoextraction of heavy metals from contaminated soil, water and atmosphere using ornamental plants: mechanisms and efficiency improvement strategies

Accumulation of heavy metals (HMs) in soil, water and air is one of the major environmental concerns worldwide, which mainly occurs due to anthropogenic activities such as industrialization, urbanization, and mining. Conventional remediation strategies involving physical or chemical techniques are not cost-effective and/or eco-friendly, reinforcing the necessity for development of novel approaches. Phytoextraction has attracted considerable attention over the past decades and generally refers to use of plants for cleaning up environmental pollutants such as HMs. Compared to other plant types such as edible crops and medicinal plants, ornamental plants (OPs) seem to be a more viable option as they offer several advantages including cleaning up the HMs pollution, beautification of the environment, by-product generation and related economic benefits, and not generally being involved in the food/feed chain or other direct human applications. Phytoextraction ability of OPs involve diverse detoxification pathways such as enzymatic and non-enzymatic (secondary metabolites) antioxidative responses, distribution and deposition of HMs in the cell walls, vacuoles and metabolically inactive tissues, and chelation of HMs by a ligand such as phytochelatins followed by the sequestration of the metal-ligand complex into the vacuoles. The phytoextraction efficiency of OPs can be improved through chemical, microbial, soil amending, and genetic approaches, which primarily target bioavailability, uptake, and sequestration of HMs. In this review, we explore the phytoextraction potential of OPs for remediation of HMs-polluted environments, underpinning mechanisms, efficiency improvement strategies, and highlight the potential future research directions.

Isolation and characterization of mercury-resistant bacteria from wastewater sources in Egypt

An important mechanism for microbial resistance to mercury is its reduction into elemental mercury (facilitated by the merA gene). Thirty-eight microbial isolates from a variety of wastewater sources in Egypt were collected. Approximately 14 of the 38 isolates exhibited not only a high degree of tolerance to mercury (up to 160 ppm) but also a high degree of resistance to other tested heavy metals (Cu, Co, Ni, and Zn). From these 14, the 10 most resistant isolates were selected for further study and were found to include 9 Gram-negative and 1 Gram-positive bacterial strains. Multi-antibiotic-resistance profiles were detected for 6 out of the 10 selected isolates. All the tested Gram-negative isolates (n = 9) harbored a plasmid-encoded merA gene. The mercury removal effectiveness for the 10 selected isolates ranged between 50% and 99.9%, among which Stenotrophomonas maltophilia ADW10 recorded the highest rate (99.9%; at an initial mercury concentration of 20 ppm). To the best of our knowledge, this is the first study to (i) demonstrate the presence of a multimetal-resistant S. maltophilia bacterium with a high mercury tolerance capacity that would make it a suitable candidate for future bioremediation efforts in heavy-metal-polluted areas in Egypt and (ii) report Pseudomonas otitidis as one of the mercury-resistant bacteria.

Microbial Diversity of Mer Operon Genes and Their Potential Rules in Mercury Bioremediation and Resistance

Background:

Mercury is a toxic metal that is present in small amounts in the environment, but its level is rising steadily, due to different human activities, such as industrialization. It can reach humans through the food chain, amalgam fillings, and other sources, causing different neurological disorders, memory loss, vision impairment, and may even lead to death; making its detoxification an urgent task.

Methods:

Various physical and chemical mercury remediation techniques are available, which generally aim at: (i) reducing its mobility or solubility; (ii) causing its vaporization or condensation; (iii) its separation from contaminated soils. Biological remediation techniques, commonly known as bioremediation, are also another possible alternative, which is considered as cheaper than the conventional means and can be accomplished using either (i) organisms harboring themeroperon genes (merB,merA,merR,merP,merT,merD,merF,merC,merE,merHandmerG), or (ii) plants expressing metal-binding proteins. Recently, differentmerdeterminants have been genetically engineered into several organisms, including bacteria and plants, to aid in detoxification of both ionic and organic forms of mercury.

Results:

Bacteria that are resistant to mercury compounds have at least a mercuric reductase enzyme (MerA) that reduces Hg+2to volatile Hg0, a membrane-bound protein (MerT) for Hg+2uptake and an additional enzyme, MerB, that degrades organomercurials by protonolysis. Presence of bothmerA andmerB genes confer broad-spectrum mercury resistance. However,merA alone confers narrow spectrum inorganic mercury resistance.

Conclusion:

To conclude, this review discusses the importance of mercury-resistance genes in mercury bioremediation. Functional analysis ofmeroperon genes and the recent advances in genetic engineering techniques could provide the most environmental friendly, safe, effective and fantastic solution to overcome mercuric toxicity.

Recent strategies of increasing metal tolerance and phytoremediation potential using genetic transformation of plants

Avoidance and reduction of soil contamination with heavy metals is one of the most serious global challenges. Nowadays, science offers us new opportunities of utilizing plants to extract toxic elements from the soil by means of phytoremediation. Plant abilities to uptake, translocate, and transform heavy metals, as well as to limit their toxicity, may be significantly enhanced via genetic engineering. This paper provides a comprehensive review of recent strategies aimed at the improvement of plant phytoremediation potential using plant transformation and employing current achievements in nuclear and cytoplasmic genome transformation. Strategies for obtaining plants suitable for effective soil clean-up and tolerant to excessive concentrations of heavy metals are critically assessed. Promising directions in genetic manipulations, such as gene silencing and cis- and intragenesis, are also discussed. Moreover, the ways of overcoming disadvantages of phytoremediation using genetic transformation approachare proposed. The knowledge gathered here could be useful for designing new research aimed at biotechnological improvement of phytoremediation efficiency.

Bio-augmentation and nutrient amendment decrease concentration of mercury in contaminated soil

Four mercury (Hg) contaminated soils with different pH (7.6, 8.5, 4.2 and 7.02) and total organic carbon contents (2.1, 2.2, 4 and 0.9%) were subjected to bioremediation utilizing a Hg volatilizing bacterial strain Sphingobium SA2 and nutrient amendment. In a field with ~280mg/kgHg, 60% of Hg was removed by bio-augmentation in 7days, and the removal was improved when nutrients were added. Whereas in artificially spiked soils, with ~100mg/kgHg, removal due to bio-augmentation was 33 to 48% in 14days. In the field contaminated soil, nutrient amendment alone without bio-augmentation removed 50% of Hg in 28days. Nutrient amendment also had an impact on Hg remediation in the spiked soils, but the best results were obtained when the strain and nutrients both were applied. The development of longer root lengths from lettuce and cucumber seeds grown in the remediated soils confirmed that the soil quality improved after bioremediation. This study clearly demonstrates the potential of Hg-reducing bacteria in remediation of Hg-contaminated soils. However, it is desirable to trap the volatilized Hg for enhanced bioremediation.

In-Situ Remediation Approaches for the Management of Contaminated Sites: A Comprehensive Overview

Though several in-situ treatment methods exist to remediate polluted sites, selecting an appropriate site-specific remediation technology is challenging and is critical for successful clean up of polluted sites. Hence, a comprehensive overview of all the available remediation technologies to date is necessary to choose the right technology for an anticipated pollutant. This review has critically evaluated the (i) technological profile of existing in-situ remediation approaches for priority and emerging pollutants, (ii) recent innovative technologies for on-site pollutant remediation, and (iii) current challenges as well as future prospects for developing innovative approaches to enhance the efficacy of remediation at contaminated sites.

Potential Biotechnological Strategies for the Cleanup of Heavy Metals and Metalloids

Global mechanization, urbanization, and various natural processes have led to the increased release of toxic compounds into the biosphere. These hazardous toxic pollutants include a variety of organic and inorganic compounds, which pose a serious threat to the ecosystem. The contamination of soil and water are the major environmental concerns in the present scenario. This leads to a greater need for remediation of contaminated soils and water with suitable approaches and mechanisms. The conventional remediation of contaminated sites commonly involves the physical removal of contaminants, and their disposition. Physical remediation strategies are expensive, non-specific and often make the soil unsuitable for agriculture and other uses by disturbing the microenvironment. Owing to these concerns, there has been increased interest in eco-friendly and sustainable approaches such as bioremediation, phytoremediation and rhizoremediation for the cleanup of contaminated sites. This review lays particular emphasis on biotechnological approaches and strategies for heavy metal and metalloid containment removal from the environment, highlighting the advances and implications of bioremediation and phytoremediation as well as their utilization in cleaning-up toxic pollutants from contaminated environments.

In situ remediation technologies for mercury-contaminated soil

Mercury from anthropogenic activities is a pollutant that poses significant risks to humans and the environment. In soils, mercury remediation can be technically challenging and costly, depending on the subsurface mercury distribution, the types of mercury species, and the regulatory requirements. This paper introduces the chemistry of mercury and its implications for in situ mercury remediation, which is followed by a detailed discussion of several in situ Hg remediation technologies in terms of applicability, cost, advantages, and disadvantages. The effect of Hg speciation on remediation performance, as well as Hg transformation during different remediation processes, was detailed. Thermal desorption, electrokinetic, and soil flushing/washing treatments are removal technologies that mobilize and capture insoluble Hg species, while containment, solidification/stabilization, and vitrification immobilize Hg by converting it to less soluble forms. Two emerging technologies, phytoremediation and nanotechnology, are also discussed in this review.

Plastid genomics in horticultural species: importance and applications for plant population genetics, evolution, and biotechnology

During the evolution of the eukaryotic cell, plastids, and mitochondria arose from an endosymbiotic process, which determined the presence of three genetic compartments into the incipient plant cell. After that, these three genetic materials from host and symbiont suffered several rearrangements, bringing on a complex interaction between nuclear and organellar gene products. Nowadays, plastids harbor a small genome with ∼130 genes in a 100-220 kb sequence in higher plants. Plastid genes are mostly highly conserved between plant species, being useful for phylogenetic analysis in higher taxa. However, intergenic spacers have a relatively higher mutation rate and are important markers to phylogeographical and plant population genetics analyses. The predominant uniparental inheritance of plastids is like a highly desirable feature for phylogeny studies. Moreover, the gene content and genome rearrangements are efficient tools to capture and understand evolutionary events between different plant species. Currently, genetic engineering of the plastid genome (plastome) offers a number of attractive advantages as high-level of foreign protein expression, marker gene excision, gene expression in operon and transgene containment because of maternal inheritance of plastid genome in most crops. Therefore, plastid genome can be used for adding new characteristics related to synthesis of metabolic compounds, biopharmaceutical, and tolerance to biotic and abiotic stresses. Here, we describe the importance and applications of plastid genome as tools for genetic and evolutionary studies, and plastid transformation focusing on increasing the performance of horticultural species in the field.

Expression of γ-tocopherol methyltransferase in chloroplasts results in massive proliferation of the inner envelope membrane and decreases susceptibility to salt and metal-induced oxidative stresses by reducing reactive oxygen species

The γ-tocopherol methyltransferase (γ-TMT) is an important enzyme regulating synthesis of four tocopherols (α, γ, β and δ). In this report, we investigated the role of γ-TMT in regulating abiotic stress within chloroplasts. The At γ-tmt overexpressed via the tobacco chloroplast genome accumulated up to 7.7% of the total leaf protein, resulting in massive proliferation of the inner envelope membrane (IEM, up to eight layers). Such high-level expression of γ-TMT converted most of γ-tocopherol to α-tocopherol in transplastomic seeds (~10-fold higher) in the absence of abiotic stress. When grown in 400 mm NaCl, α-tocopherol content in transplastomic TMT leaves increased up to 8.2-fold and 2.4-fold higher than wild-type leaves. Likewise, under heavy metal stress, α-tocopherol content in the TMT leaves increased up to 7.5-fold, twice higher than in the wild type. Under extreme salt stress, the wild type accumulated higher starch and total soluble sugars, but TMT plants were able to regulate sugar transport. Hydrogen peroxide and superoxide content in wild type increased up to 3-fold within 48 h of NaCl stress when compared to TMT plants. The ion leakage from TMT leaves was significantly less than wild-type plants under abiotic stress and with less malondialdehyde, indicating lower lipid peroxidation. Taken together, these studies show that α-tocopherol plays a crucial role in the alleviation of salt and heavy metal stresses by decreasing ROS, lipid peroxidation and ion leakage, in addition to enhancing vitamin E conversion. Increased proliferation of the IEM should facilitate studies on retrograde signalling from chloroplast to the nucleus.

Pollution due to hazardous glass waste

Pollution resulting from hazardous glass (HG) is widespread across the globe, both in terms of quantity and associated health risks. In waste cathode ray tube (CRT) and fluorescent lamp glass, mercury and lead are present as the major pollutants. The current review discusses the issues related to quantity and associated risk from the pollutant present in HG and proposes the chemical, biological, thermal, hybrid, and nanotechniques for its management. The hybrid is one of the upcoming research models involving the compatible combination of two or more techniques for better and efficient remediation. Thermal mercury desorption starts at 100 °C but for efficient removal, the temperature should be >460 °C. Involvement of solar energy for this purpose makes the research more viable and ecofriendly. Nanoparticles such as Fe, Se, Cu, Ni, Zn, Ag, and WS2 alone or with its formulation can immobilize heavy metals present in HG by involving a redox mechanism. Straight-line equation from year-wise sale can provide future sale data in comparison with lifespan which gives future pollutant approximation. Waste compact fluorescent lamps units projected for the year 2015 is 9,300,000,000 units and can emit nearly 9,300 kg of mercury. On the other hand, CRT monitors have been continuously replaced by more improved versions like liquid crystal display and plasma display panel resulting in the production of more waste. Worldwide CRT production was 83,300,000 units in 2002 and can approximately release 83,000 metric tons of lead.

Enhanced phytoremediation of mixed heavy metal (mercury)-organic pollutants (trichloroethylene) with transgenic alfalfa co-expressing glutathione S-transferase and human P450 2E1

Soil contamination is a global environmental problem and many efforts have been made to find efficient remediation methods over the last decade. Moreover, remediation of mixed contaminated soils are more difficult. In the present study, transgenic alfalfa plants pKHCG co-expressing glutathione S-transferase (GST) and human P450 2E1 (CYP2E1) genes were used for phytoremediation of mixed mercury (Hg)-trichloroethylene (TCE) contaminants. Simultaneous expression of GST and CYP2E1 may produce a significant synergistic effect, and leads to improved resistance and accumulation to heavy metal-organic complex contaminants. Based on the tolerance and accumulation assays, pKHCG transgenic plants were more resistant to Hg/TCE complex pollutants and many folds higher in Hg/TCE-accumulation than the non-transgenic control plants in mixed contaminated soil. It is confirmed that GST and CYP2E1 co-expression may be a useful strategy to help achieve mixed heavy metal-organic pollutants phytoremediation.

Increase methylmercury accumulation in Arabidopsis thaliana expressing bacterial broad-spectrum mercury transporter MerE

The bacterial merE gene derived from the Tn21 mer operon encodes a broad-spectrum mercury transporter that governs the transport of methylmercury and mercuric ions across bacterial cytoplasmic membranes, and this gene is a potential molecular tool for improving the efficiency of methylmercury phytoremediation. A transgenic Arabidopsis engineered to express MerE was constructed and the impact of expression of MerE on methylmercury accumulation was evaluated. The subcellular localization of transiently expressed GFP-tagged MerE was examined in Arabidopsis suspension-cultured cells. The GFP-MerE was found to localize to the plasma membrane and cytosol. The transgenic Arabidopsis expressing MerE accumulated significantly more methymercury and mercuric ions into plants than the wild-type Arabidopsis did. The transgenic plants expressing MerE was significantly more resistant to mercuric ions, but only showed more resistant to methylmercury compared with the wild type Arabidopsis. These results demonstrated that expression of the bacterial mercury transporter MerE promoted the transport and accumulation of methylmercury in transgenic Arabidopsis, which may be a useful method for improving plants to facilitate the phytoremediation of methylmercury pollution.

Expression of the bacterial heavy metal transporter MerC fused with a plant SNARE, SYP121, in Arabidopsis thaliana increases cadmium accumulation and tolerance

The bacterial merC gene from the Tn21-encoded mer operon is a potential molecular tool for improving the efficiency of metal phytoremediation. Arabidopsis SNARE molecules, including SYP111, SYP121, and AtVAM3 (SYP22), were attached to the C-terminus of MerC to target the protein to various organelles. The subcellular localization of transiently expressed GFP-fused MerC-SYP111, MerC-SYP121, and MerC-AtVAM3 was examined in Arabidopsis suspension-cultured cells. We found that GFP-MerC-SYP111 and GFP-MerC-SYP121 localized to the plasma membrane, whereas GFP-AtVAM3 localized to the vacuolar membranes. These results demonstrate that SYP111/SYP121 and AtVAM3 target foreign molecules to the plasma membrane and vacuolar membrane, respectively. To enhance the efficiency and potential of plants to sequester and accumulate cadmium from contaminated sites, transgenic Arabidopsis plants expressing MerC, MerC-SYP111, MerC-SYP121, or MerC-AtVAM3 were generated. The transgenic plants that expressed MerC, MerC-SYP121, or MerC-AtVAM3 appeared to be normal, whereas the transgenic that expressed MerC-SYP111 exhibited severe growth defects. The transgenic plants expressing merC-SYP121 were more resistant to cadmium than the wild type and accumulated significantly more cadmium. Thus, the expression of MerC-SYP121 in the plant plasma membrane may provide an ecologically compatible approach for the phytoremediation of cadmium pollution.

The phytochelatin transporters AtABCC1 and AtABCC2 mediate tolerance to cadmium and mercury

Heavy metals such as cadmium (Cd) and mercury (Hg) are toxic pollutants that are detrimental to living organisms. Plants employ a two-step mechanism to detoxify toxic ions. First, phytochelatins bind to the toxic ion, and then the metal-phytochelatin complex is sequestered in the vacuole. Two ABCC-type transporters, AtABCC1 and AtABCC2, that play a key role in arsenic detoxification, have recently been identified in Arabidopsis thaliana. However, it is unclear whether these transporters are also implicated in phytochelatin-dependent detoxification of other heavy metals such as Cd(II) and Hg(II). Here, we show that atabcc1 single or atabcc1 atabcc2 double knockout mutants exhibit a hypersensitive phenotype in the presence of Cd(II) and Hg(II). Microscopic analysis using a Cd-sensitive probe revealed that Cd is mostly located in the cytosol of protoplasts of the double mutant, whereas it occurs mainly in the vacuole of wild-type cells. This suggests that the two ABCC transporters are important for vacuolar sequestration of Cd. Heterologous expression of the transporters in Saccharomyces cerevisiae confirmed their role in heavy metal tolerance. Over-expression of AtABCC1 in Arabidopsis resulted in enhanced Cd(II) tolerance and accumulation. Together, these results demonstrate that AtABCC1 and AtABCC2 are important vacuolar transporters that confer tolerance to cadmium and mercury, in addition to their role in arsenic detoxification. These transporters provide useful tools for genetic engineering of plants with enhanced metal tolerance and accumulation, which are desirable characteristics for phytoremediation.

Bacterial mer operon-mediated detoxification of mercurial compounds: a short review

Mercury pollution has emerged as a major problem in industrialized zones and presents a serious threat to environment and health of local communities. Effectiveness and wide distribution of mer operon by horizontal and vertical gene transfer in its various forms among large community of microbe reflect importance and compatibility of this mechanism in nature. This review specifically describes mer operon and its generic molecular mechanism with reference to the central role played by merA gene and its related gene products. The combinatorial action of merA and merB together maintains broad spectrum mercury detoxification system for substantial detoxification of mercurial compounds. Feasibility of mer operon to coexist with antibiotic resistance gene (ampr, kanr, tetr) clusters enables extensive adaptation of bacterial species to adverse environment. Flexibility of the mer genes to exist as intricate part of chromosome, plasmids, transposons, and integrons enables high distribution of these genes in wider microbial gene pool. Unique ability of this system to manipulate oligodynamic property of mercurial compounds for volatilization of mercuric ions (Hg2+) makes it possible for a wide range of microbes to tolerate mercury-mediated toxicity.

Engineering plastid fatty acid biosynthesis to improve food quality and biofuel production in higher plants

The ability to manipulate plant fatty acid biosynthesis by using new biotechnological approaches has allowed the production of transgenic plants with unusual fatty acid profile and increased oil content. This review focuses on the production of very long chain polyunsaturated fatty acids (VLCPUFAs) and the increase in oil content in plants using molecular biology tools. Evidences suggest that regular consumption of food rich in VLCPUFAs has multiple positive health benefits. Alternative sources of these nutritional fatty acids are found in cold-water fishes. However, fish stocks are in severe decline because of decades of overfishing, and also fish oils can be contaminated by the accumulation of toxic compounds. Recently, there is also an increase in oilseed use for the production of biofuels. This tendency is partly associated with the rapidly rising costs of petroleum, increased concern about the environmental impact of fossil oil and the attractive need to develop renewable sources of fuel. In contrast to this scenario, oil derived from crop plants is normally contaminant free and less environmentally aggressive. Genetic engineering of the plastid genome (plastome) offers a number of attractive advantages, including high-level foreign protein expression, marker-gene excision and transgene containment because of maternal inheritance of plastid genome in most crops. Here, we describe the possibility to improve fatty acid biosynthesis in plastids, production of new fatty acids and increase their content in plants by genetic engineering of plastid fatty acid biosynthesis via plastid transformation.

Metallothionein expression in chloroplasts enhances mercury accumulation and phytoremediation capability

Genetic engineering to enhance mercury phytoremediation has been accomplished by expression of the merAB genes that protects the cell by converting Hg[II] into Hg[0] which volatilizes from the cell. A drawback of this approach is that toxic Hg is released back into the environment. A better phytoremediation strategy would be to accumulate mercury inside plants for subsequent retrieval. We report here the development of a transplastomic approach to express the mouse metallothionein gene (mt1) and accumulate mercury in high concentrations within plant cells. Real-time PCR analysis showed that up to 1284 copies of the mt1 gene were found per cell when compared with 1326 copies of the 16S rrn gene, thereby attaining homoplasmy. Past studies in chloroplast transformation used qualitative Southern blots to evaluate indirectly transgene copy number, whereas we used real-time PCR for the first time to establish homoplasmy and estimate transgene copy number and transcript levels. The mt1 transcript levels were very high with 183,000 copies per ng of RNA or 41% the abundance of the 16S rrn transcripts. The transplastomic lines were resistant up to 20 μm mercury and maintained high chlorophyll content and biomass. Although the transgenic plants accumulated high concentrations of mercury in all tissues, leaves accumulated up to 106 ng, indicating active phytoremediation and translocation of mercury. Such accumulation of mercury in plant tissues facilitates proper disposal or recycling. This study reports, for the first time, the use of metallothioneins in plants for mercury phytoremediation. Chloroplast genetic engineering approach is useful to express metal-scavenging proteins for phytoremediation.

Transgenic plants for phytoremediation

Phytoremediation is a green, sustainable and promising solution to problems of environmental contamination. It entails the use of plants for uptake, sequestration, detoxification or volatilization of inorganic and organic pollutants from soils, water, sediments and possibly air. Phytoremediation was born from the observation that plants possessed physiological properties useful for environmental remediation. This was shortly followed by the application of breeding techniques and artificial selection to genetically improve some of the more promising and interesting species. Now, after nearly 20 years of research, transgenic plants for phytoremediation have been produced, but none have reached commercial existence. Three main approaches have been developed: (1) transformation with genes from other organisms (mammals, bacteria, etc.); (2) transformation with genes from other plant species; and (3) overexpression of genes from the same plant species. Many encouraging results have been reported, even though in some instances results have been contrary to expectations. This review will illustrate the main examples with a critical discussion of what we have learnt from them.

Knowledge explosion in phytotechnologies for environmental solutions

Bioremediation using biotechnology and biodiversity--a multiscale approach.