Advances in solid-state NMR of cellulose

On the Mechanism of the Ionizing Radiation-Induced Degradation and Recycling of Cellulose

The use of ionizing radiation offers a boundless range of applications for polymer scientists, from inducing crosslinking and/or degradation to grafting a wide variety of monomers onto polymeric chains. This review in particular aims to introduce the field of ionizing radiation as it relates to the degradation and recycling of cellulose and its derivatives. The review discusses the main mechanisms of the radiolytic sessions of the cellulose molecules in the presence and absence of water. During the radiolysis of cellulose, in the absence of water, the primary and secondary electrons from the electron beam, and the photoelectric, Compton effect electrons from gamma radiolysis attack the glycosidic bonds (C-O-C) on the backbone of the cellulose chains. This radiation-induced session results in the formation of alkoxyl radicals and C-centered radicals. In the presence of water, the radiolytically produced hydroxyl radicals (●OH) will abstract hydrogen atoms, leading to the formation of C-centered radicals, which undergo various reactions leading to the backbone session of the cellulose. Based on the structures of the radiolytically produced free radicals in presence and absence of water, covalent grafting of vinyl monomers on the cellulose backbone is inconceivable.

The isolation of lignin with native-like structure

Searching for renewable alternatives for fossil carbon resources to produce chemicals, fuels and materials is essential for the development of a sustainable society. Lignin, a major component of lignocellulosic biomass, is an abundant renewable source of aromatics and is currently underutilized as it is often burned as an undesired side stream in the production of paper and bioethanol. This lignin harbors great potential as source of high value aromatic chemicals and materials. Biorefinery schemes focused on lignin are currently under development with aim of acquiring added value from lignin. However, the performance of these novel lignin-focused biorefineries is closely linked with the quality of extracted lignin in terms of the level of degradation and modification. Thus, the reactivity including the degradation pathways of the native lignin contained in the plant material needs to be understood in detail to potentially achieve higher value from lignin. Undegraded native-like lignin with an as close as possible structure to native lignin contained in the lignocellulosic plant material serves as a promising model lignin to support detailed studies on the structure and reactivity of native lignin, yielding key understanding for the development of lignin-focused biorefineries. The aim of this review is to highlight the different methods to attain "native-like" lignins that can be valuable for such studies. This is done by giving a basic introduction on what is known about the native lignin structure and the techniques and methods used to analyze it followed by an overview of the fractionation and isolation methods to isolate native-like lignin. Finally, a perspective on the isolation and use of native-like lignin is provided, showing the great potential that this type of lignin brings for understanding the effect of different biomass treatments on the native lignin structure.

Tailoring Acid Free-Paper based Analytical Devices (Af-PADs) via radiation assisted modification of cellulose paper

A novel green fabrication approach is being proposed based on radiation assisted modification of Whatman filter paper 1 (WFP) for development of Acid Free-Paper based Analytical Devices (Af-PADs). Af-PADs exude immense potential as handy tools for on-site detection of toxic pollutants such as, Cr(VI), boron, etc., which have established detection protocols involving acid mediated colorimetric reactions that necessitate external acid addition. The proposed Af-PAD fabrication protocol asserts its novelty through elimination of external acid addition step, making the detection process safer and simpler. To achieve this, poly(acrylic acid) (PAA) was grafted onto WFP via a single step, room temperature process of gamma radiation induced simultaneous irradiation grafting, introducing acidic -COOH groups in the paper thereon. Grafting parameters namely, absorbed dose and concentrations of monomer, homopolymer inhibitor and acid were optimized. The -COOH groups incorporated in PAA-grafted-WFP (PAA-g-WFP) provide localized acidic conditions for colorimetric reactions between pollutants and their sensing agents, anchored on the PAA-g-WFP. Af-PADs loaded with 1,5-diphenylcarbazide (DPC) have been ably demonstrated for visual detection and quantitative estimation of Cr(VI) in water samples using RGB image analysis, with LOD value of 1.2 mg.L^-1 and a measurement range comparable to that of commercially available PADs based Cr(VI) visual detection kits.

A comprehensive overview of cotton genomics, biotechnology and molecular biological studies

Cotton is an irreplaceable economic crop currently domesticated in the human world for its extremely elongated fiber cells specialized in seed epidermis, which makes it of high research and application value. To date, numerous research on cotton has navigated various aspects, from multi-genome assembly, genome editing, mechanism of fiber development, metabolite biosynthesis, and analysis to genetic breeding. Genomic and 3D genomic studies reveal the origin of cotton species and the spatiotemporal asymmetric chromatin structure in fibers. Mature multiple genome editing systems, such as CRISPR/Cas9, Cas12 (Cpf1) and cytidine base editing (CBE), have been widely used in the study of candidate genes affecting fiber development. Based on this, the cotton fiber cell development network has been preliminarily drawn. Among them, the MYB-bHLH-WDR (MBW) transcription factor complex and IAA and BR signaling pathway regulate the initiation; various plant hormones, including ethylene, mediated regulatory network and membrane protein overlap fine-regulate elongation. Multistage transcription factors targeting CesA 4, 7, and 8 specifically dominate the whole process of secondary cell wall thickening. And fluorescently labeled cytoskeletal proteins can observe real-time dynamic changes in fiber development. Furthermore, research on the synthesis of cotton secondary metabolite gossypol, resistance to diseases and insect pests, plant architecture regulation, and seed oil utilization are all conducive to finding more high-quality breeding-related genes and subsequently facilitating the cultivation of better cotton varieties. This review summarizes the paramount research achievements in cotton molecular biology over the last few decades from the above aspects, thereby enabling us to conduct a status review on the current studies of cotton and provide strong theoretical support for the future direction.

Comparison and assessment of methods for cellulose crystallinity determination

The degree of crystallinity in cellulose significantly affects the physical, mechanical, and chemical properties of cellulosic materials, their processing, and their final application. Measuring the crystalline structures of cellulose is a challenging task due to inadequate consistency among the variety of analytical techniques available and the lack of absolute crystalline and amorphous standards. Our article reviews the primary methods for estimating the crystallinity of cellulose, namely, X-ray diffraction (XRD), nuclear magnetic resonance (NMR), Raman and Fourier-transform infrared (FTIR) spectroscopy, sum-frequency generation vibrational spectroscopy (SFG), as well as differential scanning calorimetry (DSC), and evolving biochemical methods using cellulose binding molecules (CBMs). The techniques are compared to better interrogate not only the requirements of each method, but also their differences, synergies, and limitations. The article highlights fundamental principles to guide the general community to initiate studies of the crystallinity of cellulosic materials.

Solution-state nuclear magnetic resonance spectroscopy of crystalline cellulosic materials using a direct dissolution ionic liquid electrolyte

Owing to its high sustainable production capacity, cellulose represents a valuable feedstock for the development of more sustainable alternatives to currently used fossil fuel-based materials. Chemical analysis of cellulose remains challenging, and analytical techniques have not advanced as fast as the development of the proposed materials science applications. Crystalline cellulosic materials are insoluble in most solvents, which restricts direct analytical techniques to lower-resolution solid-state spectroscopy, destructive indirect procedures or to 'old-school' derivatization protocols. While investigating their use for biomass valorization, tetralkylphosphonium ionic liquids (ILs) exhibited advantageous properties for direct solution-state nuclear magnetic resonance (NMR) analysis of crystalline cellulose. After screening and optimization, the IL tetra-n-butylphosphonium acetate [P₄₄₄₄][OAc], diluted with dimethyl sulfoxide-d₆, was found to be the most promising partly deuterated solvent system for high-resolution solution-state NMR. The solvent system has been used for the measurement of both 1D and 2D experiments for a wide substrate scope, with excellent spectral quality and signal-to-noise, all with modest collection times. The procedure initially describes the scalable syntheses of an IL, in 24-72 h, of sufficient purity, yielding a stock electrolyte solution. The dissolution of cellulosic materials and preparation of NMR samples is presented, with pretreatment, concentration and dissolution time recommendations for different sample types. Also included is a set of recommended 1D and 2D NMR experiments with parameters optimized for an in-depth structural characterization of cellulosic materials. The time required for full characterization varies between a few hours and several days.

Boron Adsorption Kinetics of Microcrystalline Cellulose and Polymer Resin

Tailoring boron-polysaccharide interactions is an important strategy for developing functional soft materials such as hydrogels, fire retardants, and sorbents for environmental remediation, for example, using lignocellulosic biomass. For such applications to be realized, it is paramount to understand the adsorption kinetics of borate anions on cellulose and their local structures. Here, the kinetic aspects of boron adsorption by microcrystalline cellulose, lignin, and polymeric resin are investigated and compared. Borate anions interact with the vicinal diols in the glucopyranoside moieties of cellulose to yield chemisorbed boron chelate complexes. In contrast to cellulose, technical lignin contains fewer cis-vicinal diols, and it does not have a tendency to form such chelate complexes upon treatment with the aqueous boric acid solution. The formation kinetics and stability of these chelate complexes strongly depend on nanoscale structures, as well as reaction conditions such as pH and concentration of the sorbate and sorbent. Specifically, insights into the distinct boron adsorption sites were obtained by solid-state one-dimensional (1D) ¹¹B magic-angle spinning NMR and the local structures and intermolecular interactions in the vicinities of boron chelate complexes are elucidated by analyzing two-dimensional (2D) ¹H-¹³C and ¹¹B-¹H heteronuclear correlation NMR spectra. The total boron adsorption capacity of cellulose is estimated to be in the 1.3-3.0 mg range per gram of sorbent, which is lower than the boron adsorption capacity of a polystyrene-based resin, ∼17.2 mg of boron per gram of Amberlite IRA 743. Our study demonstrates that the local backbone and side chain flexibility as well as the structures of polyol groups play a significant role in determining the kinetic and thermodynamic stability of chelate complexes, yielding to different boron adsorption capabilities of lignocellulosic polymers.

Effect of particle size on composition, physicochemical, functional, and structural properties of insoluble dietary fiber concentrate from citrus peel

To investigate the composition, physicochemical, functional, and structural properties of citrus insoluble dietary fiber concentrate from citrus peel affected by different particle sizes, citrus insoluble dietary fiber concentrate was modified by coarse crush and superfine grinding treatments. The results showed that the contents of hemicellulose and lignin significantly decrease and a significant increase in cellulose and insoluble dietary fiber contents with the reduction in particle size. In addition, the markedly decreased particle size and obviously microstructural changes of citrus insoluble dietary fiber concentrate powder were observed. The color value of citrus insoluble dietary fiber concentrate was observably improved, crystallinity and thermal stability of modified fiber slightly increase with the decrease in particle size, which is due to the partial elimination of hemicellulose and lignin after the treatments. However, water holding capacity, water swelling capacity, and oil holding capacity were found to be lower with the reduction in particle size, which might be attributed to the fact that superfine grinding treatment destroyed the structure integrity, thus causing some soluble components to break away from the cellulose backbone, or due to aggregation of smaller granules. The present study suggested that decreasing the particle size could effectively change some properties of citrus insoluble dietary fiber concentrate, which will provide new perspectives for the application of citrus insoluble dietary fiber concentrate in food products.

Understanding Nanocellulose-Water Interactions: Turning a Detriment into an Asset

Modern technology has enabled the isolation of nanocellulose from plant-based fibers, and the current trend focuses on utilizing nanocellulose in a broad range of sustainable materials applications. Water is generally seen as a detrimental component when in contact with nanocellulose-based materials, just like it is harmful for traditional cellulosic materials such as paper or cardboard. However, water is an integral component in plants, and many applications of nanocellulose already accept the presence of water or make use of it. This review gives a comprehensive account of nanocellulose-water interactions and their repercussions in all key areas of contemporary research: fundamental physical chemistry, chemical modification of nanocellulose, materials applications, and analytical methods to map the water interactions and the effect of water on a nanocellulose matrix.

One-Step Oxidation of Orange Peel Waste to Carbon Feedstock for Bacterial Production of Polyhydroxybutyrate

Orange peels are an abundant food waste stream that can be converted into useful products, such as polyhydroxyalkanoates (PHAs). Limonene, however, is a key barrier to building a successful biopolymer synthesis from orange peels as it inhibits microbial growth. We designed a one-pot oxidation system that releases the sugars from orange peels while eliminating limonene through superoxide (O₂^{• -}) generated from potassium superoxide (KO₂). The optimum conditions were found to be treatment with 0.05 M KO₂ for 1 h, where 55% of the sugars present in orange peels were released and recovered. The orange peel sugars were then used, directly, as a carbon source for polyhydroxybutyrate (PHB) production by engineered Escherichia coli. Cell growth was improved in the presence of the orange peel liquor with 3 w/v% exhibiting 90-100% cell viability. The bacterial production of PHB using orange peel liquor led to 1.7-3.0 g/L cell dry weight and 136-393 mg (8-13 w/w%) ultra-high molecular weight PHB content (Mw of ~1900 kDa) during a 24 to 96 h fermentation period. The comprehensive thermal characterization of the isolated PHBs revealed polymeric properties similar to PHBs resulting from pure glucose or fructose. Our one-pot oxidation process for liberating sugars and eliminating inhibitory compounds is an efficient and easy method to release sugars from orange peels and eliminate limonene, or residual limonene post limonene extraction, and shows great promise for extracting sugars from other complex biomass materials.

Opportunities for Ivory Nut Residue Valorization as a Source of Nanocellulose Colloidal Suspensions

Ivory nut seeds have been traditionally exploited in Central and South America for obtaining vegetable ivory. The residues from this industry are susceptible to valorization as a source of fatty acids (by organic extraction) and mannans (by alkaline dissolution and regeneration). Nonetheless, cellulose may also be recovered at the end of this fractionation process by acid hydrolysis and functionalization, with associated advantages over other lignocellulosic sources due to the absence of lignin in the endospermic tissue. In this work, various experimental parameters (sulfuric acid concentration, temperature, and hydrolysis time) were investigated to optimize the processing conditions for preparing stable nanocellulose suspensions after ultrasonication. The most stable nanocellulose gel (1 wt% solid content) was obtained after 4-h hydrolysis at 60 °C with 8 M H2SO4 and was characterized by using complementary tech-niques, including dynamic light scattering (DLS), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), nano-fibril sulfation measurements, vibrational and solid-state nuclear magnetic resonance (CP/MAS 13C-NMR) spectroscopies, and thermal analysis. This nanocellulose hydrogel is susceptible to further utilization in various applications and fields, e.g., in agricul-ture for controlling the release of agrochemicals, in pharmaceutics for developing new dosage forms, and in the treatment of wastewater from the textile and paper industries.

Cellulose from Annual Plants and Its Use for the Production of the Films Hydrophobized with Tetrafluoroethylene Telomers

Cellulose HogC was produced by the modified traditional method with 35% yield from the stem of Sosnovsky hogweed and was characterized by elemental analysis, infrared (IR) spectroscopy, powder X-ray diffractometry, differential scanning calorimetry (DSC) and X-ray photoelectron spectroscopy (XPS). For HogC, the degree of crystallinity (approximately 70%) and the glass transition temperature (105–108 °C) were determined. It was found that the whiteness characteristic in the case of HogC was 92% and this significate was obtained without a bleaching procedure using chlorine-containing reagents. In this paper, the possibility of hydrophobization of HogC films by treatment with radiation-synthesized telomers of tetrafluoroethylene is shown. It was found that the contact angle of the telomer-treated cellulose film surface depended on the properties of the telomers (the chemical nature of the solvent, and the initial concentration of tetrafluoroethylene) and could reach 140 degrees.

Current limitations of solid-state NMR in carbohydrate and cell wall research

High-resolution investigation of cell wall materials has emerged as an important application of biomolecular solid-state NMR (ssNMR). Multidimensional correlation experiments have become a standard method for obtaining sufficient spectral resolution to determine the polymorphic structure of carbohydrates and address biochemical questions regarding the supramolecular organization of cell walls. Using plant cellulose and matrix polysaccharides as examples, we will review how the multifaceted complexity of polysaccharide structure is impeding the resonance assignment process and assess the available biochemical and spectroscopic approaches that could circumvent this barrier. We will emphasize the ineffectiveness of the current methods in reconciling the ever-growing dataset and deriving structural information. We will evaluate the protocols for achieving efficient and homogeneous hyperpolarization across the cell wall material using magic-angle spinning dynamic nuclear polarization (MAS-DNP). Critical questions regarding the line-broadening effects of cell wall molecules at cryogenic temperature and by paramagnetic biradicals will be considered. Finally, the MAS-DNP method will be placed into a broader context with other structural characterization techniques, such as cryo-electron microscopy, to advance ssNMR research in carbohydrate and cell wall biomaterials.

Structure of In Vitro-Synthesized Cellulose Fibrils Viewed by Cryo-Electron Tomography and 13C Natural-Abundance Dynamic Nuclear Polarization Solid-State NMR

Cellulose, the most abundant biopolymer, is a central source for renewable energy and functionalized materials. In vitro synthesis of cellulose microfibrils (CMFs) has become possible using purified cellulose synthase (CESA) isoforms from Physcomitrium patens and hybrid aspen. The exact nature of these in vitro fibrils remains unknown. Here, we characterize in vitro-synthesized fibers made by CESAs present in membrane fractions of P. patens over-expressing CESA5 by cryo-electron tomography and dynamic nuclear polarization (DNP) solid-state NMR. DNP enabled measuring two-dimensional 13C-13C correlation spectra without isotope-labeling of the fibers. Results show structural similarity between in vitro fibrils and native CMF in plant cell walls. Intensity quantifications agree with the 18-chain structural model for plant CMF and indicate limited fibrillar bundling. The in vitro system thus reveals insights into cell wall synthesis and may contribute to novel cellulosic materials. The integrated DNP and cryo-electron tomography methods are also applicable to structural studies of other carbohydrate-based biomaterials.

Solid State NMR a Powerful Technique for Investigating Sustainable/Renewable Cellulose-Based Materials

Solid state nuclear magnetic resonance (ssNMR) is a powerful and attractive characterization method for obtaining insights into the chemical structure and dynamics of a wide range of materials. Current interest in cellulose-based materials, as sustainable and renewable natural polymer products, requires deep investigation and analysis of the chemical structure, molecular packing, end chain motion, functional modification, and solvent–matrix interactions, which strongly dictate the final product properties and tailor their end applications. In comparison to other spectroscopic techniques, on an atomic level, ssNMR is considered more advanced, especially in the structural analysis of cellulose-based materials; however, due to a dearth in the availability of a broad range of pulse sequences, and time consuming experiments, its capabilities are underestimated. This critical review article presents the comprehensive and up-to-date work done using ssNMR, including the most advanced NMR strategies used to overcome and resolve the structural difficulties present in different types of cellulose-based materials.

Solid-State NMR Investigations of Extracellular Matrixes and Cell Walls of Algae, Bacteria, Fungi, and Plants

Extracellular matrixes (ECMs), such as the cell walls and biofilms, are important for supporting cell integrity and function and regulating intercellular communication. These biomaterials are also of significant interest to the production of biofuels and the development of antimicrobial treatment. Solid-state nuclear magnetic resonance (ssNMR) and magic-angle spinning-dynamic nuclear polarization (MAS-DNP) are uniquely powerful for understanding the conformational structure, dynamical characteristics, and supramolecular assemblies of carbohydrates and other biomolecules in ECMs. This review highlights the recent high-resolution investigations of intact ECMs and native cells in many organisms spanning across plants, bacteria, fungi, and algae. We spotlight the structural principles identified in ECMs, discuss the current technical limitation and underexplored biochemical topics, and point out the promising opportunities enabled by the recent advances of the rapidly evolving ssNMR technology.

The exposome paradigm to predict environmental health in terms of systemic homeostasis and resource balance based on NMR data science

The environment, from microbial ecosystems to recycled resources, fluctuates dynamically due to many physical, chemical and biological factors, the profile of which reflects changes in overall state, such as environmental illness caused by a collapse of homeostasis. To evaluate and predict environmental health in terms of systemic homeostasis and resource balance, a comprehensive understanding of these factors requires an approach based on the "exposome paradigm", namely the totality of exposure to all substances. Furthermore, in considering sustainable development to meet global population growth, it is important to gain an understanding of both the circulation of biological resources and waste recycling in human society. From this perspective, natural environment, agriculture, aquaculture, wastewater treatment in industry, biomass degradation and biodegradable materials design are at the forefront of current research. In this respect, nuclear magnetic resonance (NMR) offers tremendous advantages in the analysis of samples of molecular complexity, such as crude bio-extracts, intact cells and tissues, fibres, foods, feeds, fertilizers and environmental samples. Here we outline examples to promote an understanding of recent applications of solution-state, solid-state, time-domain NMR and magnetic resonance imaging (MRI) to the complex evaluation of organisms, materials and the environment. We also describe useful databases and informatics tools, as well as machine learning techniques for NMR analysis, demonstrating that NMR data science can be used to evaluate the exposome in both the natural environment and human society towards a sustainable future.

Faster magic angle spinning reveals cellulose conformations in woods

We present a first report on the detection of three different C6 conformers of cellulose in spruce, as revealed by solid-state 1H-13C correlation spectra. The breakthrough in 1H resolution is achieved by magic-angle spinning in the regime of 150 kHz. The suppression of dense dipolar network of 1H provides inverse detected 13C spectra at a good sensitivity even in natural samples. We find that the glycosidic linkages are initially more ordered in spruce than maple, but a thermal treatment of spruce leads to a more heterogeneous packing order of the remaining cellulose fibrils.

Enzymatic response of ryegrass cellulose and hemicellulose valorization introduced by sequential alkaline extractions

BACKGROUND

In view of the natural resistance of hemicelluloses in lignocellulosic biomass on bioconversion of cellulose into fermentable sugars, alkali extraction is considered as an effective method for gradually fractionating hemicelluloses and increasing the bioconversion efficiency of cellulose. In the present study, sequential alkaline extractions were performed on the delignified ryegrass material to achieve high bioconversion efficiency of cellulose and comprehensively investigated the structural features of hemicellulosic fractions for further applications.

RESULTS

Sequential alkaline extractions removed hemicelluloses from cellulose-rich substrates and degraded part of amorphous cellulose, reducing yields of cellulose-rich substrates from 73.0 to 27.7% and increasing crystallinity indexes from 31.7 to 41.0%. Alkaline extraction enhanced bioconversion of cellulose by removal of hemicelluloses and swelling of cellulose, increasing of enzymatic hydrolysis from 72.3 to 95.3%. In addition, alkaline extraction gradually fractionated hemicelluloses into six fractions, containing arabinoxylans as the main polysaccharides and part of β-glucans. Simultaneously, increasing of alkaline concentration degraded hemicellulosic polysaccharides, which resulted in a decreasing their molecular weights from 67,510 to 50,720 g/mol.

CONCLUSIONS

The present study demonstrated that the sequential alkaline extraction conditions had significant effects on the enzymatic hydrolysis efficiency of cellulose and the investigation of the physicochemical properties of hemicellulose. Overall, the investigation the enzymatic hydrolysis efficiency of cellulose-rich substrates and the structural features of hemicelluloses from ryegrass will provide useful information for the efficient utilization of cellulose and hemicelluloses in biorefineries.

Advanced characterization of regioselectively substituted methylcellulose model compounds by DNP enhanced solid-state NMR spectroscopy

Dynamic Nuclear Polarization MAS NMR is introduced to characterize model methylcellulose ether compounds at natural isotopic abundance. In particular an approach is provided to determine the position of the methyl ether group within the repeating unit. Specifically, natural abundance ¹³C-¹³C correlation experiments are used to characterize model 3-O-methylcellulose and 2,3-O-dimethylcellulose, and identify changes in chemical shifts with respect to native cellulose. We also probe the use of through space connectivity to the closest carbons to the CH₃ to identify the substitution site on the cellulose ether. To this end, a series of methylcellulose ethers was prepared by a multistep synthesis approach. Key intermediates in these reactions were 2,6-O-diprotected thexyldimethylsilyl (TDMS) cellulose and 6-O-monoprotected TDMS cellulose methylated under homogeneous conditions. The products had degrees of substitution of 0.99 (3-O-methylcellulose) and 2.03 (2,3-O-dimethylcellulose) with exclusively regioselective substitution. The approaches developed here will allow characterization of the substitution patterns in cellulose ethers.

Structural and Morphological Analysis of Cellulose Pulp Produced from the Fractionation of Eucalyptus obliqua Sawdust Using γ-Valerolactone

Organic solvents offer promising methods for the fractionation of Eucalyptus obliqua lignocellulosic biomass. This study investigated the impact of γ-valerolactone (GVL) fractionation on the morphology of cellulose and its internal structure using scanning electron microscopy (SEM), nuclear magnetic resonance (NMR) and Fourier-transform infrared (FT-IR) spectroscopy. The solubilized lignin precipitated on the macrofibril surface as lignin spheres. GVL fractionation significantly increased the crystallinity of the recovered pulps from 0.29 for the sawdust to an average of 0.53 and a maximum of 0.66. The main states of cellulose that were susceptible to hydrolysis during the fractionation were amorphous and surface cellulose, both of which were reduced significantly, while paracrystalline and pure crystalline fractions in the pulp increased. It was concluded that GVL fractionation can produce a crystalline cellulose pulp of high quality suitable for further processing.

Signal Deconvolution and Generative Topographic Mapping Regression for Solid-State NMR of Multi-Component Materials

Solid-state nuclear magnetic resonance (ssNMR) spectroscopy provides information on native structures and the dynamics for predicting and designing the physical properties of multi-component solid materials. However, such an analysis is difficult because of the broad and overlapping spectra of these materials. Therefore, signal deconvolution and prediction are great challenges for their ssNMR analysis. We examined signal deconvolution methods using a short-time Fourier transform (STFT) and a non-negative tensor/matrix factorization (NTF, NMF), and methods for predicting NMR signals and physical properties using generative topographic mapping regression (GTMR). We demonstrated the applications for macromolecular samples involved in cellulose degradation, plastics, and microalgae such as Euglena gracilis. During cellulose degradation, ¹³C cross-polarization (CP)-magic angle spinning spectra were separated into signals of cellulose, proteins, and lipids by STFT and NTF. GTMR accurately predicted cellulose degradation for catabolic products such as acetate and CO₂. Using these methods, the ¹H anisotropic spectrum of poly-ε-caprolactone was separated into the signals of crystalline and amorphous solids. Forward prediction and inverse prediction of GTMR were used to compute STFT-processed NMR signals from the physical properties of polylactic acid. These signal deconvolution and prediction methods for ssNMR spectra of macromolecules can resolve the problem of overlapping spectra and support macromolecular characterization and material design.

Engineering of sustainable biomaterial composites from cellulose and silk fibroin: Fundamentals and applications

This review addresses composites prepared from cellulose (Cel) and silk fibroin (SF) to generate multifunctional, biocompatible, biodegradable materials such as fibers, films and scaffolds for tissue engineering. First, we discuss briefly the molecular structures of Cel and SF. Their structural features explain why certain solvents, e.g., ionic liquids, inorganic electrolyte solutions dissolve both biopolymers. We discuss the mechanisms of Cel dissolution because in many cases they also apply to (much less studied) SF dissolution. Subsequently, we discuss the fabrication and characterization of Cel/SF composite biomaterials. We show how the composition of these materials beneficially affects their mechanical properties, compared to those of the precursor biopolymers. We also show that Cel/SF materials are excellent and versatile candidates for biomedical applications because of the inherent biocompatibility of their components.

Changes to the Contour Length, Molecular Chain Length, and Solid-State Structures of Nanocellulose Resulting from Sonication in Water

Sonication in water reduced the average contour lengths of nanocellulose prepared from wood cellulose fiber and microcrystalline cellulose. Most of the kinks in the wood cellulose nanofibrils were formed during the initial 10 min of sonication. Fragmentation occurred at the kinks and rigid segments associated with depolymerization during subsequent sonication for 10-120 min, resulting in the formation of cellulose nanocrystals with low aspect ratios. Solid-state cross-polarization magic angle sample spinning ¹³C-nuclear magnetic resonance revealed that the original crystalline regions of the cellulose were partly transformed to fibril surfaces or disordered regions by both pretreatment and the subsequent fragmentation of molecular chains during sonication. The nanocellulose prepared from microcrystalline cellulose had different fragmentation behavior with regard to molecular chain length following sonication. The results indicated that on average the hexagonal 36 cellulose chain structure formed the cross-section of each wood cellulose microfibril.

Unlocking the architecture of native plant cell walls via solid-state nuclear magnetic resonance

Understanding the biosynthesis and architecture of the plant cell wall is key to predictably engineering plants as a sustainable bioenergy source. Multi-dimensional solid-state nuclear magnetic resonance (ssNMR) is a promising technique to investigate the three-dimensional networks formed between cell wall components in their native state, and develop models of cell wall architecture. To do this, it is necessary to produce plant material that is highly enriched in the carbon-13 isotope (¹³C), since carbon-12 (¹²C) is inactive in NMR. Here, we present a cost-effective way to generate ¹³C-enriched mature plant tissue and to determine the degree of ¹³C incorporation. We describe a series of multi-dimensional ssNMR experiments that have been used in recent studies of cell wall architecture, and provide an introduction to interpreting the resulting ssNMR spectra.

Solid-state NMR studies of solvent-mediated, acid-catalyzed woody biomass pre-treatment for enzymatic conversion of residual cellulose

Enzymes selectively hydrolyze the carbohydrate fractions of lignocellulosic biomass into corresponding sugars, but these processes are limited by low yields and slow catalytic turnovers. Under certain conditions, the rates and yields of enzymatic sugar production can be increased by pretreating biomass using solvents, heat and dilute acid catalysts. However, the mechanistic details underlying this behavior are not fully elucidated, and designing effective pretreatment strategies remains an empirical challenge. Herein, using a combination of solid-state and high-resolution magic-angle-spinning NMR, infrared spectroscopy and X-ray diffractometry, we show that the extent to which cellulase enzymes are able to hydrolyze solvent-pretreated biomass can be understood in terms of the ability of the solvent to break the chemical linkages between cellulose and non-cellulosic materials in the cell wall. This finding is of general significance to enzymatic biomass conversion research, and implications for designing improved biomass conversion strategies are discussed. These findings demonstrate the utility of solid-state NMR as a tool to elucidate the key chemical and physical changes that occur during the liquid-phase conversion of real biomass.

Influence of green solvent on levulinic acid production from lignocellulosic paper waste

Lignocellulosic wastes constitute a significant portion of the municipal solid waste, which should be valorised for the synthesis of value-added chemicals to achieve circular bioeconomy. This study evaluates the use of γ-valerolactone (GVL) and acetone as green co-solvents to produce levulinic acid (LA) from lignocellulosic paper towel waste at different temperatures using dilute H₂SO₄. At the highest reaction temperature (200 °C), H₂O-only system achieved ~15 Cmol% of LA at maximum. while GVL/H₂O and acetone/H₂O co-solvent systems enhanced the depolymerisation of paper towel waste and the subsequent conversion to LA, with the highest yield amounted to ~32 Cmol%. Acetone/H₂O solvent system generated ~17 Cmol% LA at a lower temperature (180 °C), while higher temperature induced polymerisation of soluble sugars and intermediates, hindering further conversion to LA. In contrast, the availability of soluble sugars was higher in the GVL/H₂O system, which favoured the production of LA at higher temperatures.

Investigation of the internal structure and dynamics of cellulose by 13C-NMR relaxometry and 2DPASS-MAS-NMR measurements

Internal structure and dynamics of commercial and natural cellulose were studied by measuring chemical shift anisotropy (CSA) parameters, and spin-lattice relaxation rate (1/T₁) at each and every chemically different carbon nuclear site. CSA parameters were measured by ¹³C two-dimensional phase adjusted spinning sideband (2DPASS) cross-polarization magic angle spinning (CP-MAS) NMR experiment. Site specific spin-lattice relaxation time was measured by Torchia-CP method. Anisotropy parameters of C4 and C6 regions are higher than C1 and C235 regions and asymmetry of C4 line is lower than any other carbon site. The higher values of CSA parameters of C4 and C6 nuclei arise due to the rotation of O4-C4, C1-O4, O5-C5-C6-O6 and C4-C5-C6-O6 bonds at torsion angles ψ, Φ, χ and χ' respectively and the influence of interchain and intrachain hydrogen bondings. Two distinct peaks are also observed for C4 and C6 resonance line position-one peak arises primarily due to the nuclei in amorphous region and another one arises due to the same nuclei resides in paracrystalline region. The spin-lattice relaxation time and the CSA parameters are different at these two distinct peak positions of C4 and C6 line. Molecular correlation time of each and every chemically different carbon site was calculated with the help of CSA parameters and spin-lattice relaxation time. The molecular correlation time of the amorphous region is one order of magnitude less than the crystalline region. The distinction between amorphous and paracrystalline regions of cellulose is more vividly portrayed by determining spin-lattice relaxation time, CSA parameters, and molecular correlation time at each and every chemically different carbon site. This type of study correlating the structure and dynamics of cellulose will illuminate the path of inventing biomimetic materials.

Set-Up of Bacterial Cellulose Production From the Genus Komagataeibacter and Its Use in a Gluten-Free Bakery Product as a Case Study

The use of bacterial cellulose (BC) in food systems is still limited due to production costs. Nine clones belonging to Komagataeibacter hansenii, Komagataeibacter nataicola, Komagataeibacter rhaeticus, Komagataeibacter swingsii, and Komagataeibacter xylinus species were screened for cellulose productivity in growth tests with five different carbon sources and three nitrogen sources. The water-holding and rehydration capacities of the purified cellulose were determined. The structure of the polymer was investigated through nuclear magnetic resonance (NMR) spectroscopy, attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopy and X-ray diffraction (XRD) analysis, and observed by scanning electron microscope (SEM). Natural mutants of K. rhaeticus LMG 22126T and K. swingsii LMG 22125T showed different productivity. The factors "bacterial isolate" and "nitrogen source" significantly affected the production of cellulose (p < 0.01) rather than the factor "carbon source" (p = 0.15). However, on average, the best conditions for increasing yield were found in medium containing glucose and peptone. Water-holding capacity (WHC) values ranged from 10.7 to 42.3 (g water/g cellulose) with significant differences among strains (p < 0.01), while the rehydration capacity varied from 4.2 to 9.3 (g water/g cellulose). A high crystallinity (64-80%) was detected in all samples with Iα fractions corresponding to 67-93%. The ATR-FT-IR spectra and the XRD patterns confirmed the expected structure. BC made by GVP isolate of K. rhaeticus LMG 22126T, which was the strain with the highest yield, was added to a gluten-free bread formulation. Results obtained from measurements of technological parameters in dough leavening and baking trials were promising for implementation in potential novel foods.

Determination of hydroxyl groups in biorefinery resources via quantitative 31P NMR spectroscopy

The analysis of chemical structural characteristics of biorefinery product streams (such as lignin and tannin) has advanced substantially over the past decade, with traditional wet-chemical techniques being replaced or supplemented by NMR methodologies. Quantitative ³¹P NMR spectroscopy is a promising technique for the analysis of hydroxyl groups because of its unique characterization capability and broad potential applicability across the biorefinery research community. This protocol describes procedures for (i) the preparation/solubilization of lignin and tannin, (ii) the phosphitylation of their hydroxyl groups, (iii) NMR acquisition details, and (iv) the ensuing data analyses and means to precisely calculate the content of the different types of hydroxyl groups. Compared with traditional wet-chemical techniques, the technique of quantitative ³¹P NMR spectroscopy offers unique advantages in measuring hydroxyl groups in a single spectrum with high signal resolution. The method provides complete quantitative information about the hydroxyl groups with small amounts of sample (~30 mg) within a relatively short experimental time (~30-120 min).

Catalyzed Reaction of Cellulose and Lignin with Methyltrimethoxysilane-FT-IR, 13C NMR and 29Si NMR Studies

It can be found that reaction mechanisms and interactions between wood and organosilicone compounds have not been sufficiently explored. The aim of the study was to determine bonds formed between either cellulose or lignin and methyltrimethoxysilane (MTMOS) during a catalytic silanization reaction. Silanization was performed in the presence of two catalysts of a diverse mechanism of functionalization: aluminum acetylacetonate (Al(acac)₃) and acetic acid (AcOH). For this purpose, FT-IR, ¹³C and ²⁹Si NMR techniques were used. Cellulose silanization efficiency without a catalyst was unlikely. Lignin undergoes a silanization reaction with alkoxysilanes much easier than cellulose. The results showed new bonds between biopolymers and the silanising agent. The new bonds were confirmed by signals at the FT-IR spectra, e.g., 770 cm⁻¹ and 1270 cm⁻¹ (Si–CH₃), and at the NMR signal coming from the T¹, T² and T³ structures. Efficiency of reaction was confirmed by atomic absorption spectroscopy (AAS) analysis.

A multi-functional-group modified cellulose for enhanced heavy metal cadmium adsorption: Performance and quantum chemical mechanism

Heavy metal contamination directly threatened human life and health. In this work, a novel carboxyl, amide, carbonyl sulfide and secondary amino group grafted cellulose derivative adsorbent (modified-cellulose) was prepared in an attempt to remove heavy metal Cd²⁺. The XRD, FTIR, ¹³C NMR and XPS results showed that the carboxyl, amide, carbonyl sulfide and secondary amino group were grafted onto the cellulose backbone successfully. Effects of various factors on the adsorption performance were investigated as well as the adsorption mechanism. The Cd²⁺ adsorption capacity of modified-cellulose was pretty good, up to 401.1 mg/g and with 3 times enhancement. The adsorption process was spontaneous, well described by the Freundlich model (R² = 0.994), confirmed to the pseudo-second-order model (R² > 0.997), and mainly controlled by chemisorption. The density functional theory (DFT) calculations indicating that the Cd²⁺ binding ability of multi-functional groups modified cellulose was stronger than that of single-functional group modified cellulose. The preferential adsorption sites were analyzed based on the frontier orbital theory (FOT), and they were concentrated on the secondary amino groups and carbonyl sulfides. It is foreseeable that the as-prepared modified-cellulose adsorbent has great potential in heavy metal cadmium removal, and our conclusions could provide significant theoretical guidance in the due bioresource utilization.

Facile Tuning of the Surface Energy of Cellulose Nanofibers for Nanocomposite Reinforcement

The isolation of nanocellulose from lignocellulosic biomass, with desirable surface chemistry and morphology, has gained extensive scientific attention for various applications including polymer nanocomposite reinforcement. Additionally, environmental and economic concerns have driven researchers to explore viable alternatives to current isolation approaches, employing chemicals with reduced environmental impact. To address these issues, in this study, we have tuned the amphiphilic behavior of cellulose nanofibers (CNFs) by employing controlled alkali treatment, instead of in combination with expensive, environmentally unsustainable conventional approaches. Microscopic and spectroscopic analysis demonstrated that this approach is capable of tuning composition and interfacial tension of CNFs through a careful control of the quantity of residual lignin and hemicellulose. To elucidate the performance of CNF as an efficient reinforcing nanofiller in hydrophobic polymer matrices, prevulcanized natural rubber (NR) latex was employed as a suitable host polymer. CNF/NR nanocomposites with different CNF loading levels (0.1-1 wt % CNF) were prepared by a casting method. It was found that the incorporation of 0.1 wt % CNF treated with a 0.5 w/v % sodium hydroxide solution led to the highest latex reinforcement efficiency, with an enhancement in tensile stress and toughness of 16% to 42 MPa and 9% to 197 MJ m^-3, respectively. This property profile offers a potential application for the high-performance medical devices such as condoms and gloves.

Understanding the influences of different pretreatments on recalcitrance of Populus natural variants

Four different pretreatment technologies were applied to two Populus natural variants and the effects of each pretreatment on glucose release were compared. Physicochemical properties of pretreated biomass were analyzed by attenuated total reflection Fourier transform infrared spectroscopy, gel permeation chromatography, and cross polarization/magic angle spinning carbon-13 nuclear magnetic resonance techniques. The results revealed that hemicellulose and lignin were removed to different extents during various pretreatments. The degree of polymerization of cellulose was decreased in the order of alkali > hydrothermal > organosolv > dilute acid pretreatment. Cellulose crystallinity index was slightly increased after each pretreatment. The results also demonstrated that organosolv pretreatment resulted in the highest glucose yield. Among the tested properties of Populus, degree of polymerization of cellulose was negatively correlated with glucose release, whereas hemicellulose and lignin removal, and cellulose accessibility were positively associated with glucose release from the two Populus natural variants.

A new approach for bioethanol production from sugarcane bagasse using hydrodynamic cavitation assisted-pretreatment and column reactors

Hydrodynamic cavitation (HC) was adopted to assist alkaline-hydrogen peroxide pretreatment of sugarcane bagasse (SCB). In the following condition: 0.29 M of NaOH, 0.78% (v/v) of H₂O₂, 9.95 min of process time and 3 bar of inlet pressure, 95.4% of digestibility of cellulosic fraction was achieved. To take the best use of the pretreated biomass, the overall process was intensified by way of employing a packed bed flow-through column reactor and thus enabling to handle a high solid loading of 20%, thereby leading to cellulose and hemicellulose conversions to 74.7% and 75%, respectively. In the fermentation step, a bubble column reactor was introduced to maximize ethanol production from the pretreated SCB by Scheffersomyces stipitis NRRL-Y7124, resulting in 31.50 g/L of ethanol, 0.49 g/g of ethanol yield and 0.68 g/L.h of productivity. All this showed that our HC-assisted NaOH-H₂O₂ pretreatment strategy along with the process intensification approach might offer an option for SCB-based biorefineries.

Effect of Tetrahydrofuran on the Solubilization and Depolymerization of Cellulose in a Biphasic System

The dissolution of cellulose from biomass is a crucial but complicated issue for maximizing the utilization of biomass resources to produce valuable chemicals, because of the extreme insolubility of cellulose. A biphasic NaCl-H₂ O-tetrahydrofuran (THF) system was studied, in which most of the pure microcrystalline cellulose (M-cellulose, 96.6 % conversion at 220 °C) and that contained in actual biomass were converted. Nearly half of the O6-H⋅⋅⋅O3 intermolecular hydrogen bonds could be broken by THF in the H₂ O-THF co-solvent system, whereas the cleavage of O2-H⋅⋅⋅O6 intramolecular hydrogen bonds by H₂ O was significantly inhibited. In the NaCl-H₂ O-THF system, THF could significantly promote the effects of both H₂ O and NaCl on the disruption of O2-H⋅⋅⋅O6 and O3-H⋅⋅⋅O5 intramolecular hydrogen bonds, respectively. In addition, THF could protect and transfer the cellulose-derived products to the organic phase by forming hydrogen bonds between the oxygen atom in THF and the hydrogen atom of C4-OH in the glucose or aldehyde group in 5-hydroxymethylfurfural (HMF), which can lead more NaCl to combine with the -OH of M-cellulose and further disrupt hydrogen bonding in M-cellulose, thereby improving the yield of small molecular weight products (especially HMF) and further promoting the dissolution of cellulose. As a cheap and reusable system, NaCl-H₂ O-THF system may be a promising approach for the dissolution and further conversion of cellulose in lignocellulosic biomass without any enzymes, ionic liquids, or conventional catalysts.

Integrating High-Resolution and Solid-State Magic Angle Spinning NMR Spectroscopy and a Transcriptomic Analysis of Soybean Tissues in Response to Water Deficiency

INTRODUCTION

Solid-state NMR (SSNMR) spectroscopy methods provide chemical environment and ultrastructural details that are not easily accessible by other non-destructive, high-resolution spectral techniques. High-resolution magic angle spinning (HR-MAS) has been widely used to obtain the metabolic profile of a heterogeneous sample, combining the resolution enhancement provided by MAS in SSNMR with the shimming and locking procedures in liquid-state NMR.

OBJECTIVE

In this work, we explored the feasibility of using the HR-MAS and SSNMR techniques to identify metabolic changes in soybean leaves subjected to water-deficient conditions.

METHODOLOGY

Control and water-deficient soybean leaves were analysed using one-dimensional (1D) HR-MAS and SSNMR. Total RNA was extracted from the leaves for the transcriptomic analysis.

RESULTS

The 1 H HR-MAS and CP-MAS 13 C{1 H} spectra of soybean leaves grown with and without water deficiency stress revealed striking differences in metabolites. A total of 30 metabolites were identified, and the impact of water deficiency on the metabolite profile of soybean leaves was to induce amino acid synthesis. High expression levels of genes required for amino acid biosynthesis were highly correlated with the compounds identified by 1 H HR-MAS.

CONCLUSIONS

The integration of the 1 H HR-MAS and SSNMR spectra with the transcriptomic data provided a complete picture of the major changes in the metabolic profile of soybeans in response to water deficiency. Copyright © 2017 John Wiley & Sons, Ltd.

Plant metabolism as studied by NMR spectroscopy

The study of plant metabolism impacts a broad range of domains such as plant cultural practices, plant breeding, human or animal nutrition, phytochemistry and green biotechnologies. Plant metabolites are extremely diverse in terms of structure or compound families as well as concentrations. This review attempts to illustrate how NMR spectroscopy, with its broad variety of experimental approaches, has contributed widely to the study of plant primary or specialized metabolism in very diverse ways. The review presents recent developments of one-dimensional and multi-dimensional NMR methods to study various aspects of plant metabolism. Through recent examples, it highlights how NMR has proved to be an invaluable tool for the global characterization of sample composition within metabolomic studies, and shows some examples of use for targeted phytochemistry, with a special focus on compound identification and quantitation. In such cases, NMR approaches are often used to provide snapshots of the plant sample composition. The review also covers dynamic aspects of metabolism, with a description of NMR techniques to measure metabolic fluxes - in most cases after stable isotope labelling. It is mainly intended for NMR specialists who would be interested to learn more about the potential of their favourite technique in plant sciences and about specific details of NMR approaches in this field. Therefore, as a practical guide, a paragraph on the specific precautions that should be taken for sample preparation is also included. In addition, since the quality of NMR metabolic studies is highly dependent on approaches to data processing and data sharing, a specific part is dedicated to these aspects. The review concludes with perspectives on the emerging methods that could change significantly the role of NMR in the field of plant metabolism by boosting its sensitivity. The review is illustrated throughout with examples of studies selected to represent diverse applications of liquid-state or HR-MAS NMR.

Direct characterization of cotton fabrics treated with di-epoxide by nuclear magnetic resonance

A non-acid-based, di-functional epoxide, neopentyl glycol diglycidyl ether (NPGDGE), was used to modify cotton fabrics. Direct characterization of the modified cotton was conducted by Nuclear Magnetic Resonance (NMR) without grinding the fabric into a fine powder. NaOH and MgBr₂ were compared in catalyzing the reaction between the epoxide groups of NPGDGE and the hydroxyl groups of cellulose. Possible reaction routes were discussed. Scanning electron microscopy (SEM) images showed that while the MgBr₂-catalyzed reaction resulted in self-polymerization of NPGDGE, the NaOH-catalyzed reaction did not. Fourier transform infrared spectroscopy (FTIR) showed that at high NaOH concentration cellulose restructures from allomorph I to II. NMR studies verified the incorporation of NPGDGE into cotton fabrics with a clear NMR signal, and confirmed that at higher NaOH concentration the efficiency of grafting of NPGDGE was increased. This demonstrates that use of solid state NMR directly on woven fabric samples can simultaneously characterize chemical modification and crystalline polymorph of cotton. No loss of tensile strength was observed for cotton fabrics modified with NPGDGE.