La2CuO4-decorated ZnO nanoparticles with improved photocatalytic activity for malachite green degradation

Green Synthesis, Characterization, and Evaluation of Photocatalytic and Antibacterial Activities of Co3O4-ZnO Nanocomposites Using Calpurnia aurea Leaf Extract

The green synthesis of transition metal oxide nanocomposites using plant extracts is a new and effective method that avoids the involvement of hazardous chemicals. Nondegradable organic pollutants and antibiotic drug resistance have become serious public health issues worldwide. Hence, the main objective of this study is to synthesize Co3O4-ZnO nanocomposites using Calpurnia aurea leaf extract and evaluate its photocatalytic and antibacterial activities. The green synthesized particles were characterized using UV-vis spectra, Fourier transform infrared spectroscopy, X-ray diffraction techniques, and scanning electron microscopy combined with energy-dispersive X-ray studies. The synthesized particles were found to be crystalline in nature with average crystallite sizes of 23.82, 14.79, 15.99, 16.46, and 21.73 nm. Scanning electron microscopy shows the spherical morphology of Co3O4-ZnO NCs, and energy-dispersive X-ray analysis confirms the formation of highly pure ZnO NPs and Co3O4-ZnO NCs. The photocatalytic activity was performed under natural sunlight using malachite green as an organic dye pollutant. The green synthesized ZnO NPs, Co3O4 NPs, 1:4, 1:3, and 1:2 Co3O4-ZnO NCs showed high degradation efficiency after 60 min of irradiation. The synthetic material showed good potential against Staphylococcus aureus and Escherichia coli, with the highest growth inhibition recorded by 1:2 Co3O4-ZnO NCs. The kinetics study of the photocatalytic degradation was confirmed as pseudo first order, and the possible mechanisms for both photocatalytic and antibacterial activities were clearly determined.

Recent advances and challenges of the green ZnO-based composites biosynthesized using plant extracts for water treatment

Recently, there has been a notable rise in the prevalence of persistent pollutants in the environment, posing a significant hazard due to their toxicity and enduring nature. Conventional wastewater treatment methods employed in treatment plants rarely address these persistent pollutants adequately. Meanwhile, the concept of green synthesis has garnered considerable attention, owing to its environmentally friendly approach that utilizes fewer toxic chemicals and solvents. The utilization of materials derived from sustainable sources presents a promising avenue for solving pressing environmental concerns. Among the various sources of biological agents, plants stand out for their accessibility, eco-friendliness, and rich reserves of phytochemicals suitable for material synthesis. The plant extract-mediated synthesis of zinc oxide nanoparticles (ZnONPs) has emerged as a promising solution for applications in wastewater treatment. Thorough investigations into the factors influencing the properties of these green ZnONPs are essential to establish a detailed and reliable synthesis process. Major weaknesses inherent in ZnONPs can be addressed by changing the optical, magnetic, and interface properties through doping with various semiconductor materials. Consequently, research efforts to mitigate water pollution are being driven by both the future prospects and limitations of ZnO-based composites. This review underscores the recent advancements of plant extract-mediated ZnONP composites for water treatment.

Phytoassisted synthesis of CuO and Ag-CuO nanocomposite, characterization, chemical sensing of ammonia, degradation of methylene blue

The elimination of hazardous industrial pollutants from aqueous solutions is an emerging area of scientific research and a worldwide problem. An efficient catalyst, Ag-CuO was synthesized for the degradation of methylene blue, the chemical sensing of ammonia. A simple novel synthetic method was reported in which new plant material Capparis decidua was used for the reduction and stabilization of the synthesized nanocatalyst. A Varying amount of Ag was doped into CuO to optimize the best catalyst that met the required objectives. Through this, the Ag-CuO nanocomposite was characterized by XRD, SEM, HR-TEM, EDX, and FTIR techniques. The mechanism of increased catalytic activity with Ag doping involves the formation of charge sink and suppression of drop back probability of charge from conduction to valance band. Herein, 2.7 mol % Ag-CuO exhibited better catalytic activities and it was used through subsequent catalytic experiments. The experimental conditions such as pH, catalyst dose, analyte initial concentration, and contact time were optimized. The as-synthesized nanocomposite demonstrates an excellent degradation efficacy of MB which is 97% at pH 9. More interestingly, the as-synthesized catalyst was successfully applied for the chemical sensing of ammonia even at very low concentrations. The lower limit of detection (LLOD) also called analytic sensitivity was calculated for ammonia sensing and found to be 1.37 ppm.

Synthesis and Mechanism of Co2+/Sr2+ Codoped Magnetic Lanthanum Cuprate with Excellent Corrosion Resistance

The special structure of perovskite-like compounds allows the existence of some open spaces in the crystals that play an important role in their crystal function enhancement and can accommodate active oxygen, which helps to solve some problems in the field of corrosion prevention. The magnetic lanthanum cuprate was obtained through the doping of Co2+ and Sr2+, and compared with La2CuO4 and epoxy resin, its corrosion resistance was improved by 215.2 and 566.7%, respectively. The micromagnetic field in the crystal interfered with the state of motion of the electrons and prolonged their transport path. High concentration doping and substitution of unequal states led to the formation of oxygen vacancy defects, which could trap active oxygen molecules and inhibit cathodic corrosion reactions. The unique alternating interlayer structure of perovskite-like compounds was conducive to the release of Cu2+, thus forming a more stable passivator on the surface of the coating. La1.96Sr0.04Cu0.98Co0.02O4 had both magnetic properties and structural advantages, which enhanced the shielding property of epoxy resin and expanded the application of perovskite-like compounds in the field of corrosion prevention.

Sonochemical synthesis and characterization of Sm2CuO4 nanostructures and their application as visible-light photocatalyst for degradation of water-soluble organic pollutants

In recent years, water contamination has become a significant crisis, and it is crucial to find new materials that can efficiently eliminate these contaminants. The current work presents the Sm2CuO4 nanophotocatalyst for the decolorization of different water-soluble organic contaminants. The fabrication of Sm2CuO4 nanostructures was achieved using a simple and rapid sonochemical pathway, resulting in an optical bandgap of 1.62 eV as determined by diffuse reflectance spectroscopy. Several factors, including different organic contaminants, organic contaminant concentrations, Sm2CuO4 dosages, and the pH of the media, were scrutinized to achieve the best efficiency. The results manifested that Sm2CuO4 was highly effective in removing different organic contaminants from water. For example, when 30 mg of Sm2CuO4 was used with 20 mg L-1 methyl orange under visible irradiation for 100 min, 91.4% of the methyl orange was destroyed. Further investigation revealed that holes (h+) were primarily responsible for pollutant photodegradation when using Sm2CuO4 as a photocatalyst. This finding suggests that Sm2CuO4 could be an excellent candidate for developing new materials to effectively remove water contaminants.

A State-of-Art Review of the Metal Oxide-Based Nanomaterials Effect on Photocatalytic Degradation of Malachite Green Dyes and a Bibliometric Analysis

A wide range of hard contaminants in wastewater is generated from different industries as byproducts of the organic compound. In this review, various metal oxide-based nanomaterials are employed for the photocatalytic removal of malachite green (MG) dye from wastewater. Some cost-effective and appropriate testing conditions are used for degrading these hard dyes to get higher removal efficiency. The effects of specific parameters are considered such as how the catalyst is made, how much dye is in the solution at first, how much nanocatalyst is needed to break down the dye, the initial pH of the dye solution, the type of light source used, the year of publications, and how long the dye has to be exposed to light to be removed. This study suggests that Scopus-based core collected data employ bibliometric methods to provide an objective analysis of global MG dye from 2011 to 2022 (12 years). The Scopus database collects all the information (articles, authors, keywords, and publications). For bibliometric analysis, 658 publications are retrieved corresponding to MG dye photodegradation, and the number of publications increases annually. A bibliometric study reveals a state-of-art review of metal oxide-based nanomaterials' effects on photocatalytic degradation of MG dyes (12 years).

Green synthesis of zinc oxide nanoparticles using Brassica oleracea var. botrytis leaf extract: Photocatalytic, antimicrobial and larvicidal activity

Green synthesis of nanomaterials has emerged as an ecofriendly sustainable technology for the removal of dyes in the last few decades. Especially, plant leaf extracts have been considered as inexpensive and effective materials for the synthesis of nanoparticles. In this study, zinc oxide nanoparticles (ZnO NPs) were prepared using leaves extract of Brassica oleracea var. botrytis (BO) by co-precipitation and applied for photocatalytic/antibacterial activity. The synthesized BO-ZnO NPs was characterized by different instrumental techniques. The UV-vis Spectrum of the synthesized material showed maximum absorbance at a wavelength of 311 nm, which confirmed the formation of BO-ZnO NPs. The XRD pattern of BO-ZnO NPs represents a hexagonal wurtzite structure and the average size of particles was about 52 nm. FT-IR spectrum analysis confirms the presence of hydroxyl, carbonyl, carboxylic, and phenol groups. SEM images exhibited a flower like morphology and EDX spectrum confirming the presence of the elements Zn and O. Photo-catalytic activity of BO-ZnO NPs was tested against thiazine dye (methylene blue-MB) degradation under direct sunlight irradiation. Around 80% of the MB dye got degraded at pH 8 under 75 min of sunlight irradiation. Further, the study examined that the antimicrobial and larvicidal activity of BO-ZnO NPs obtained through green synthesis. The antimicrobial study results showed that the BO-ZnO NPs formed zones against bacterial pathogens. The results showed the formation of an inhibition zone against B. subtills (16 mm), S.aureus (13 mm), K. pneumonia (13 mm), and E. coli (9 mm) respectively at a concentration of 100 μg/mL of BO-ZnO NPs. The larvicidal activity of the BO-ZnO NPs was tested against the fourth instar of Culex quinquefasciatus mosquito larvae The LC₅₀ and LC₉₀ values estimated through the larvicidal activity of BO-ZnO NPs were 76.03, 190.03 ppm respectively. Hence the above findings propose the synthesized BO-ZnO NPs by the ecofriendly method can be used for various environmental and antipathogenic applications.

La2CoO4+δ perovskite-mediated peroxymonosulfate activation for the efficient degradation of bisphenol A

Sulfate radical-based technology has been considered as an efficient technology to remove pharmaceuticals and personal care products (PPCPs) with heterogeneous metal-mediated catalysts for the activation of peroxymonosulfate (PMS). In this study, La₂CoO_4+δ perovskite with Ruddlesden-Popper type structure was synthesised by the sol-gel method, which was employed in PMS activation. Different characteriazation technologies were applied for the characterization of La₂CoO_4+δ , such as SEM-EDX, XRD, and XPS technologies. A common organic compound, bisphenol A (BPA), is used as a target contaminant, and the effect impactors were fully investigated and explained. The results showed that when the dosage of La₂CoO_4+δ was 0.5 g L^-1 and the concentration of PMS was 1.0 mM in neutral pH solution, about 91.1% degradation efficiency was achieved within 25 minutes. Quenching experiments were introduced in the system to verify the catalytic mechanism of PMS for the BPA degradation, proving the existence of superoxide, hydroxyl radicals and sulfate radicals, which are responsible for the catalytic degradation of BPA. Moreover, the reusability and stability of the catalyst were also conducted which showed good stability during the reaction. This work would improve the applications of A₂BO₄-type perovskites for activating PMS to degrade BPA.

SmMnO3-decorated ZnO in a hexane-water interface for enhancing visible light-driven photocatalytic degradation of malachite green

Malachite green (MG) contributes to water contamination because its accumulation adversely impacts aquatic systems. For the first time, we prepare a high photoresponse of ZnO/SmMnO₃ heterojunction via a high-speed stirring method at the nonpolar-polar interface assisted by Alstonia scholaris leaves extract (ASLE) as natural hydrolyzing and stabilizing agents. The heterojunction formation boosts the photocatalytic activity of ZnO up to 91.74% under visible light irradiation. Photoluminescence analysis confirmed that modification with SmMnO₃ increases the separation of photogenerated charges and plummets the recombination rates of electron-holes, which induces high photodegradation of MG. With 3 mg of catalyst, the %TOC removal efficiency for MG degradation over ZnO/SmMnO₃ was found to be 53.09%, which is higher than that over ZnO. The kinetics model for the photocatalytic reaction was a pseudo-first-order with excellent stability in four consecutive cycles with no structural change. The radical trapping experiment suggests that h⁺ was the major species in the MG photodegradation reaction. Additionally, morphology and elemental analyses clearly present the formation of ZnO/SmMnO₃ heterojunction without any impurities. The current research demonstrates a simple and advanced technique to design heterojunction photocatalyst at the interface of hexane-water.

Enhanced photocatalytic degradation of malachite green dye by highly stable visible-light-responsive Fe-based tri-composite photocatalysts

A novel visible-light-sensitive ZnVFeO₄ photocatalyst has been fabricated by the precipitation method at different pH values for the enhanced photocatalytic degradation of malachite green (MG) dye as a representative pollutant under visible light irradiation at neutral pH conditions. The structure and optical characteristics of the prepared photocatalysts were investigated by XRD, FTIR, N2 adsorption-desorption, TEM, diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) analyses. In addition, the photocatalytic activity of ZnVFeO₄ photocatalysts superior the efficiency to be more than that of the mono and bi-metal oxides of iron and iron zinc oxides, respectively. The best sample, ZnVFeO₄ at pH 3, significantly enhances the degradation rate under visible light to be 12.7 × 10^-3 min^-1 and can retain a stable photodegradation efficiency of 90.1% after five cycles. The effect of the catalyst dose and the initial dye concentration on the photodegradation process were studied. This promising behavior under visible light may be attributed to the low bandgap and the decreased electron-hole recombination rate of the ZnVFeO₄ heterostructures. The scavenger experiment confirmed that the hydroxyl radicals induced the MG photodegradation process effectively. Hence, the ZnVFeO₄ is a reliable visible-light-responsive heterostructure photocatalyst with excellent potential for the photodegradation of organic pollutants in wastewater treatment.

Degradation of doxycycline antibiotics using lanthanum copper oxide microspheres under simulated sunlight

In this study, lanthanum copper oxide was synthesized under hydrothermal techniques and characterized for doxycycline degradation. The catalyst exhibited enhanced photocatalytic doxycycline degradation under visible light owing to its compatible bandgap energy (1.7 eV). The XRD data revealed high crystallinity of the material with no noticeable impurities. Three-dimensional microspheres of varying sizes (average diameter of 2.52 μm) were observed from SEM. EDX confirms the successful synthesis of La₂CuO₄. The effect of DC concentration, catalyst dosage, and initial pH on the degradation rate of DC was studied methodically. Interestingly, about 85% of doxycycline (10 mg/L) was degraded within 120 min of light-emitting diode irradiation at pH 10. Oxygen vacancies and surface defects were determined through photoluminescence spectra. The recyclability experiments suggested that the catalyst is capable of degrading DC for three consecutive runs. Radical trapping trials suggested that holes (h⁺), superoxide radicals (^●O₂^-), and hydroxyl radicals (^●OH) are involved in the photodegradation of DC. Herein, the novel approach of La₂CuO₄ synthesis and the efficient visible-light harvesting capability of as-prepared catalyst reveal the potentiality for DC degradation thereby opening a new horizon of research employing La₂CuO₄ used for various environmental applications.

Ultrasound-Assisted Hydrothermal Synthesis of SrSnO3/g-C3N4 Heterojunction with Enhanced Photocatalytic Performance for Ciprofloxacin under Visible Light

In this work, an SrSnO3/g-C3N4 heterojunction with different dosage of SrSnO3 was fabricated by an ultrasound-assisted hydrothermal approach and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible diffuse reflectance spectra (UV-Vis DRS), and photoluminescence spectroscopy (PL). Ciprofloxacin was adopted to assess the degradation performance, and the sample combined with 40% SrSnO3 eliminated 93% of ciprofloxacin (20 mg/L) within 3 h under visible light, which is 6.6 and 1.7 times greater than for SrSnO3 and g-C3N4, respectively. Furthermore, 85% CIP was extinguished after five cycles of a photocatalytic process. Ultimately, a possible photocatalytic mechanism was dissected.

Enhanced Removal of Malachite Green Using Calcium-Functionalized Magnetic Biochar

To efficiently remove malachite green (MG), a novel calcium-functionalized magnetic biochar (Ca/MBC) was fabricated via a two-step pyrolysis method. Iron-containing oxides endowed the target complexes with magnetic properties, especially the chemotactic binding ability with MG, and the addition of calcium significantly changed the morphology of the material and improved its adsorption performance, especially the chemotactic binding ability with MG, which could be confirmed through FTIR, XPS, and adsorption experiments. Electrostatic adsorption, ligand exchange, and hydrogen bonding acted as essential drivers for an enhanced adsorption process, and the maximum theoretical adsorption capacity was up to 12,187.57 mg/g. Ca/MBC maintained a higher adsorption capacity at pH = 4–12, and after five adsorption–desorption cycles, the adsorption capacity and adsorption rate of MG remained at 1424.2 mg/g and 71.21%, highlighting the advantages of Ca/MBC on adsorbing MG. This study suggests that biochar can be modified by a green synthesis approach to produce calcium-functionalized magnetic biochar with excellent MG removal capacity. The synthetic material can not only remove pollutants from water but also provide an efficient way for soil remediation.

Current advancements on the fabrication, modification, and industrial application of zinc oxide as photocatalyst in the removal of organic and inorganic contaminants in aquatic systems

Industrial wastewaters contain hazardous contaminants that pollute the environment and cause socioeconomic problems, thus demanding the employment of effective remediation procedures such as photocatalysis. Zinc oxide (ZnO) nanomaterials have emerged to be a promising photocatalyst for the removal of pollutants in wastewater owing to their excellent and attractive characteristics. The dynamic tunable features of ZnO allow a wide range of functionalization for enhanced photocatalytic efficiency. The current review summarizes the recent advances in the fabrication, modification, and industrial application of ZnO photocatalyst based on the analysis of the latest studies, including the following aspects: (1) overview on the properties, structures, and features of ZnO, (2) employment of dopants, heterojunction, and immobilization techniques for improved photodegradation performance, (3) applicability of suspended and immobilized photocatalytic systems, (4) application of ZnO hybrids for the removal of various types of hazardous pollutants from different wastewater sources in industries, and (5) potential of bio-inspired ZnO hybrid nanomaterials for photocatalytic applications using renewable and biodegradable resources for greener photocatalytic technologies. In addition, the knowledge gap in this field of work is also highlighted.

Unlocking the potential of biosynthesized zinc oxide nanoparticles for degradation of synthetic organic dyes as wastewater pollutants

The azo dyes released into water from different industries are accumulating in the water bodies and bioaccumulating within living systems thereby affecting environmental health. This is a major concern in developing countries where stringent regulations are not followed for the discharge of industrial waste into water bodies. This has led to the accumulation of various pollutants including dyes. As these developing countries also face acute water shortages and due to the lack of cost-effective systems to remove these pollutants, it is essential to remove these toxic dyes from water bodies, eradicate dyes, or generate fewer toxic derivatives. The photocatalysis mechanism of degradation of azo dyes has gained importance due to its eco-friendly and non-toxic roles in the environment. The zinc nanoparticles act as photocatalysts in combination with plant extracts. Plant-based nanoparticles over the years have shown the potential to degrade dyes efficiently. This is carried out by adjusting the dye and nanoparticle concentrations and combinations of nanoparticles. Our review article considers increasing the efficiency of degradation of dyes using zinc oxide (ZnO) nanoparticles and understanding the photocatalytic mechanisms in the degradation of dyes and the toxic effects of these dyes and nanoparticles in different tropic levels.

Photocatalytic and Biological Activity of ZnO Nanoparticles Using Honey

The innovation and development of water purification methods have been at the center of extensive research for several decades. Many nanoparticles are frequently seen in industrial waste water. In this research, zinc oxide nanoparticles (ZnO) were synthesized following an autocombustion method with and without honey capping. Structural crystallinity and bonding structure were examined via X-ray diffraction (XRD) analysis and Fourier transform infrared (FTIR) spectroscopy. Optical behavior was analyzed using ultraviolet–visible (UV–Vis) spectroscopy and photoluminescence (PL). Size estimation and surface morphology were studied using scanning electron microscopy (SEM), while energy-dispersive spectroscopy (EDS) was performed to analyze the sample purity and elemental composition. The photocatalytic degradation of methylene blue (MB) by ZnO was assessed as it is an efficient water treatment process with high potential. The biological activity of ZnO nanoparticles was also investigated in terms of antibacterial and antifungal activities against different bacterial and fungal species. Surprisingly, the as-synthesized ZnO nanoparticles were found to be substantially bioactive compared to conventional drugs. Honey-mediated nanoparticles displayed 86% dye degradation efficiency, and that of bare ZnO was 60%. Therefore, the involvement of honey in the synthesis of ZnO nanoparticles has great potential due to its dual applicability in both biological and environmental remediation processes.

Preparation, Properties, and Microbial Impact of Tungsten (VI) Oxide and Zinc (II) Oxide Nanoparticles Enriched Polyethylene Sebacate Nanocomposites

Nanoparticles of tungsten oxide (WO₃) and zinc oxide (ZnO) enriched polyethylene sebacate (PES) nanocomposites were prepared through the coprecipitation process and condensation polymerization reaction. The obtained nano-sized particles of WO₃ and ZnO, PES, and nanocomposites (WO₃-PES NC and ZnO-PES NC) were investigated. The average molecular weight of the cured PES was measured by employing the gel permeation chromatography (GPC) technique. Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) spectra assured the formation of the polymeric nanocomposites.WO₃ and ZnO nanoparticles supposed a condensed porous spherical phase found implanted in the polymer structure, as detected by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. These nano-scale systems achieved an electrical activity based on the conductive nanoparticles embedded matrix as a result of the ion-ion interactions. The microbial influence of the nanocomposites was examined against pathogenic bacteria; Pseudomonas aeruginosa,Escherichia coli, Staphylococcus aureus, and Bacillus subtilis, and Fungi; Aspergillus niger, and Candidaalbicans. Results exhibited that these nanocomposites have antimicrobial effects from moderate to slightly high on bacteria and high on fungi which was confirmed by a clear zone of inhibition. This study contributes to the design of reasonable composites to be under evaluation for their catalytic effect.

The Influence of Photoactive Heterostructures on the Photocatalytic Removal of Dyes and Pharmaceutical Active Compounds: A Mini-Review

The diversification of pollutants type and concentration in wastewater has underlined the importance of finding new alternatives to traditional treatment methods. Advanced oxidation processes (AOPs), among others, are considered as promising candidate to efficiently remove organic pollutants such as dyes or pharmaceutical active compounds (PhACs). The present minireview resumes several recent achievements on the implementation and optimization of photoactive heterostructures used as photocatalysts for dyes and PhACs removal. The paper is focused on various methods of enhancing the heterostructure photocatalytic properties by optimizing parameters such as synthesis methods, composition, crystallinity, morphology, pollutant concentration and light irradiation.