Evaluation of an activated carbon from olive stones used as an adsorbent for heavy metal removal from aqueous phases

Recent advancements in bamboo nanocellulose-based bioadsorbents and their potential in wastewater applications: A review

The research interest in sustainable and eco-friendly materials based on natural sources has increased dramatically due to their recyclability, biodegradability, compatibility, and nontoxic behavior. Recently, nanocellulose-based green composites are under extensive exploration and have gained popularity among researchers owing to their lightweight, lost cost, low density, excellent mechanical and physical characteristics. This review provides a comprehensive overview of the recent advancements in the extraction, modification, and application of bamboo nanocellulose as a high-performance bioadsorbent. Bamboo, a rapidly renewable resource, offers an eco-friendly alternative to traditional materials due to its abundant availability and unique structural properties. Significantly, bamboo comprises a considerable amount of cellulose, approximately 40 % to 50%, rendering it a valuable source of cellulose fiber for the fabrication of cellulose nanocrystals. The review highlights different various modification techniques which enhance the adsorption capacities and selectivity of bamboo nanocellulose. Furthermore, the integration of bamboo nanocellulose into novel composite materials and its performance in removing contaminants such as heavy metals, dyes, and organic pollutants from wastewater are critically analyzed. Emphasis is placed on the mechanisms of adsorption, regeneration potential, and the economic and environmental benefits of using bamboo-based bioadsorbents. The findings underscore the potential of bamboo nanocellulose to play a pivotal role in developing sustainable wastewater treatment technologies, offering a promising pathway towards cleaner water and a greener future.

Advancements in Olive-derived Carbon: Preparation Methods and Sustainable Applications

In the realm of material science, carbon materials, especially olive-derived carbon (ODC), have become vital due to their sustainability and diverse properties. This review examines the sustainable extraction and use of ODC, a carbohydrate-rich by-product of olive biomass. We focus on innovative preparation techniques like pyrolysis, which are crucial forenhancing ODC's microstructure and surface properties. Variables such as activating agents, impregnation ratios, and pyrolysis conditions significantly influence these properties. ODC's high specific surface area renders it invaluable for applications in energy storage (batteries and supercapacitors) and environmental sectors (water purification, hydrogen storage). Its versatility and accessibility underscore its potential for broad industrial use, makingit as a key element in sustainable development. This review provides a detailed analysis of ODC preparation methodologies, its various applications, and its role in advancing sustainable energy solutions. We highlight the novelty of ODC research and its impact on future studies, establishing this review as a crucial resource for researchers and practitioners in sustainable carbon materials. As global focus shifts towards eco-friendly solutions, ODC emerges as a critical component in shaping a sustainable, innovation-driven future.

Effective adsorption of cadmium and nickel ions in mono and bicomponent systems using eco-friendly adsorbents prepared from peanut shells

The work investigates the potential of peanut shells, an abundant agro-industrial waste, to serve as an adsorbent precursor for the effective and simple treatment of effluents loaded with cadmium and nickel ions. Among the adsorbents prepared, carbonized peanut shell (CCarb), due to its higher adsorption capacity, proved to be the most effective compared to carbonized and activated peanut shell (CATQ). The carbonization process led to structural changes, which resulted in an increase in surface area (around 6 times more in CATQ) and pore volume (around 3 times more in CATQ). Even so, the amount of H+ acid sites due to acid activation produced unfavorable effects for adsorption. Hydroxyl, carboxyl and carbonyl groups were identified on the adsorbent surface which presented favorable charges for metal adsorption. This improvement propels the carbonized variant to the forefront, demonstrating the highest adsorption capacity and reaching equilibrium in less than 90 and 60 min for cadmium and nickel ions, respectively. In both monocomponent and bicomponent systems concentrations greater than 40 ppm signify an increase in adsorption capacity for Ni2+. The experimental data best fit the Freundlich model, showing maximum adsorption capacities of 17.04 mg g-1 for cadmium and 31.28 mg g-1 for nickel. Despite the antagonistic effect observed in the bicomponent system, this study concludes by underlining the promise of activated carbon from peanut shells to harmonize technical and environmental concerns.

A sustainable and highly efficient fossil-free carbon from olive stones for emerging contaminants removal from different water matrices

The olive stone is a large waste product of the olive oil extraction industry. The present study investigates developing activated carbon from olive stone waste (OSAC) to remove pharmaceuticals from water. Different temperatures and olive stone: KOH ratios were studied. The OSAC produced at 750 °C and 1:3 ratio was found to have the highest porosity and surface area and was tested in the adsorption process. Diclofenac and ciprofloxacin were selected as model contaminants. The adsorption process was optimized with regards to OSAC dosage, pH, temperature, and initial concentration of adsorbate. The OSAC was found to be effective for a wide pH range (2-11) with an optimum dosage of 1 g/L at 25 °C. The pharmaceuticals were almost completely removed in 75 min. The adsorption was endothermic and followed first-order kinetics with physical mechanisms such as electrostatic possibly being the main driver. The optimum conditions were applied to test the removal of diclofenac and ciprofloxacin in synthetic water, lake water (Lake Balaton, Hungary) and secondary wastewater for seven cycles. There was little difference between the removal of the tested water matrices highlighting the potency of OSAC as an adsorbent for pharmaceutical removal in industrial applications. The removal dropped from >99% for the first cycle to 20-30% for the seventh cycle.

The utilization of date palm waste as an efficient adsorbent for the elimination of heavy metals from polluted water

This study focuses on the removal of heavy metal ions, such as cadmium (Cd2+), lead (Pb2+), chromium (Cr6+), and zinc (Zn2+) from water. Metals, which are often present in water, can have various origins, i.e., industrial emissions, mining, melting, corrosion, municipal, industrial waste, and agrochemicals. These metals have the potential to cause adverse effects on human health. The study employed activated carbon derived from date palm waste as a means of removing heavy metals. The activated nanoparticles were characterized using various analytical techniques, including SEM, ICP, XRD, BET, Raman, and FTIR analysis. Batch studies were conducted to optimize the metal ion adsorption onto the activated carbon of date palm waste. The adsorption process was evaluated using isotherm models and reaction kinetics under various conditions, including contact time, dosage, pH, and initial concentration. The findings of this study revealed that the prepared activated carbon from date palm waste effectively removed up to 85% of Cr6+, Pb2+, Cd2+, and Zn2+ ions from water. This study highlights the potential of using agricultural waste, to produce effective adsorbents for heavy metal removal.

Efficient and sustainable extraction of uranium from aquatic solution using biowaste-derived active carbon

Efficient and cost-effective biosorbents derived from biowaste are highly demanding to handle various environmental challenges, and demonstrate the remarkable synergy between sustainability and innovation. In this study, the extraction of uranium U(VI) was investigated on biowaste activated carbon (BAC) obtained by chemical activation (phosphoric acid) using Albizia Lebbeck pods as biowaste. The biowaste powder (BP), biowaste charcoal (BC) and BAC were evaluated by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET) with nitrogen adsorption for thermal properties, chemical structures, porosity and surface area, respectively. The pHPZC for acidic or basic nature of the surface and X-ray diffraction (XRD) analysis were performed for BAC. The morphological and elemental analysis were performed by scanning electron microscopy (SEM) and energy dispersive X-ray (EDX). The extraction of uranium U(VI) ions from aqueous solutions using BAC as sorbent was investigated by using different variables such as pH, contact time, initial uranium U(VI) concentration and BAC dose. The highest adsorption (90.60% was achieved at 0.5 g BAC dose, 2 h contact time, pH 6, 10 ppm initial U(VI) concentration and with 200 rpm shaking speeds. The production of this efficient adsorbent from biowaste could be a potential step forward in adsorption of uranium to meet the high demand of uranium for nuclear energy applications.

Performance of biochar mixed cement paste for removal of Cu, Pb and Zn from stormwater

Using biochar as a partial replacement of Portland cement in cementitious materials is a promising solution to mitigate negative environmental impacts. However, current studies in available literature primarily focus on the mechanical properties of composites made with cementitious materials and biochar. Therefore, this paper reports the effects of the type of biochar, the percentage of biochar addition, and the particle size of the biochar on the removal efficiency of Cu, Pb, and Zn, as well as the effect of contact time on the removal efficiency of Cu, Pb, and Zn, along with the compressive strength. The peak intensities of OH^-, CO₃^2- and Calcium Silicate Hydrate (Ca-Si-H) peaks increase with increasing biochar addition levels, reflecting increased hydration product formation. The reduction of particle size of biochar causes the polymerization of the Ca-Si-H gel. However, no significant changes were observed in heavy metal removal, irrespective of the percentage of biochar addition, the particle size of biochar, or the type of biochar added to the cement paste. Adsorption capacities above 19 mg/g, 11 mg/g and 19 mg/g for Cu, Pb and Zn were recorded in all composites at an initial pH of 6.0. The Pseudo second order model best described the kinetics of the Cu, Pb, and Zn removal. The rate of adsorptive removal increases with the decrease in the density of the adsorbents. Over 40% of Cu and Zn were removed as carbonates and hydroxides through precipitation, whereas over 80% of Pb removal was via adsorption. Heavy metals bonded with OH^-, CO₃^2- and Ca-Si-H functional groups. The results demonstrate that biochar can be used as a cement replacement without negatively impacting heavy metal removal. However, neutralization of the high pH is needed before safe discharge.

Urban mining from biomass, brine, sewage sludge, phosphogypsum and e-waste for reducing the environmental pollution: Current status of availability, potential, and technologies with a focus on LCA and TEA

Rapid industrialization, improved standards of living, growing economies and ever-increasing population has led to the unprecedented exploitation of the finite and non-renewable resources of minerals in past years. It was observed that out of 100 BMT of raw materials processed annually only 10% is recycled back. This has resulted in a strenuous burden on natural or primary resources of minerals (such as ores) having limited availability. Moreover, severe environmental concerns have been raised by the huge piles of waste generated at landfill sites. To resolve these issues, 'Urban Mining' from waste or secondary resources in a Circular Economy' concept is the only sustainable solution. The objective of this review is to critically examine the availability, elemental composition, and the market potential of the selected secondary resources such as lignocellulosic/algal biomass, desalination water, sewage sludge, phosphogypsum, and e-waste for minerals sequestration. This review showed that, secondary resources have potential to partially replace the minerals required in different sectors such as macro and microelements in agriculture, rare earth elements (REEs) in electrical and electronics industry, metals in manufacturing sector and precious elements such as gold and platinum in ornamental industry. Further, inputs from the selected life cycle analysis (LCA) & techno economic analysis (TEA) were discussed which showed that although, urban mining has a potential to reduce the greenhouse gaseous (GHG) emissions in a sustainable manner however, process improvements through innovative, novel and cost-effective pathways are essentially required for its large-scale deployment at industrial scale in future.

Ketoprofen and aspirin removal by laccase immobilized on date stones

In recent years, enzymatic remediation/biocatalysis has gained prominence for the bioremediation of recalcitrant chemicals. Laccase is one of the commonly investigated enzymes for bioremediation applications. There is a growing interest in immobilizing this enzyme onto adsorbents for achieving high pollutant removal through simultaneous adsorption and biodegradation. Due to the influence of the biomolecule-support interface on laccase activity and stability, it is crucial to functionalize the solid carrier prior to immobilization. Date stone (PDS), as an eco-friendly, low-cost, and effective natural adsorbent, was utilized as a carrier for laccase (fungus Trametes versicolor). After activating PDS through chemical treatments, the surface area increased by thirty-six-fold, and carbonyl groups became more prominent. Batch experiments were carried out for ketoprofen and aspirin biodegradation in aqueous solutions. After six cycles, the laccase maintained 54% of its original activity confirmed by oxidation tests of 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS). In addition, the storage, pH, and thermal stability of immobilized laccase on functionalized date stone (LFPDS) were found to be superior to that of free laccase, demonstrating its potential for ongoing applications. In the aqueous batch mode, this immobilized laccase system was used to degrade 25 mg L-1 of ketoprofen and aspirin, resulting in almost complete removal within 4 h of treatment. This study reveals that agricultural wastes such as date stone can successfully be valorized through simple activation techniques, and the final product can be used as an adsorbent and substrate for immobilization enzyme. The high efficiency of the LFPDS in removing ketoprofen and aspirin highlights the potential of this technology for removing pharmaceuticals and merits its continued development.

Removal of reactive violet 5 azodye (V5R) using bamboo, and calabash biochar

We assess the adsorption capacity of bamboo and calabash biochar (BB and CB). Using 10-50 mg/L Reactive Violet 5 Azo dye (V5R) adsorbate, the kinetics, and adsorption isotherms are investigated. We pyrolyzed the bamboo, and calabash biomass at 500 °C, washed, and oven dried at 120 °C for 48 h. The Brunauer-Emmett-Teller (BET) method indicates that the BB and CB average pore diameters are 21.1 nm and 26.5 nm, with specific surface areas of 174.67 m²/g and 44.78 m²/g, respectively. The SEM reveals a larger granular shape of the CB having pinholes on the surface, but the BB exhibited interconnected structures like a mesh. The FTIR shows C=C, C=O, O-H, and C-O-C as the predominant functional groups on both BB and CB. The adsorption of V5R on BB and CB follows pseudo-second-order kinetics and favors Langmuir isotherm with maximum adsorption capacities of 5.106 mg/g, and 0.010 mg/g, respectively. The BB adsorbs 70.9-96% V5R, whilst CB adsorbs 0.1-0.2 % only. The results suggest that bamboo biochar has the potential to eliminate 70.9-96% of 10-50 mg/L V5R from an aqueous solution, hence suitable for removing V5R. In this study, we have also presented a prototype expected to eliminate 91.6%-99.8% of the V5R from an aqueous solution.

Removal of car battery heavy metals from wastewater by activated carbons: a brief review

Spent automobile batteries are one of the most significant secondary sources of harmful heavy metals for the environment. After being incorporated into the aquatic ecosystems, these metals disseminate to various plants, microorganisms, and the human body and cause multiple adverse effects. Activated carbons (ACs) have long been used as an effective adsorbent for different heavy metals in wastewater treatment processes. Although numerous research works have been published to date on this topic, they are scattered in the literature. In this review, we have assembled these works and provided an extensive overview of the application of ACs for treating spent car battery heavy metals (CBHMs) from aquatic systems. The preparation of ACs from different precursor materials, their application in the adsorption of CBHMs, the adsorption mechanism, kinetics, adsorption isotherms and various parameters that may affect the adsorption processes have been discussed in detail. A brief comparative analysis of the adsorption performances of ACs prepared from different precursor materials is also provided. Finally, recommendations for future research works are also offered.

Nanoporous carbon materials as a sustainable alternative for the remediation of toxic impurities and environmental contaminants: A review

Due to rapidly deteriorating water resources, the world is looking forward to a sustainable alternative for the remediation of noxious pollutants such as heavy metals and organic and gaseous contaminants. To address this global issue of environmental pollution, nanoporous carbon materials (NPCMs) can be used as a one-stop solution. They are widely applied as adsorbents for many toxic impurities and environmental contaminants. The present review provides a detailed overview of the role of different synthesis factors on the porous characteristics of carbon materials, activating agents, reagent-precursor ratio and their potential application in the remediation. Findings revealed that synthetic parameters result in the formation of microporous NPCMs (S_BET: >4000 m³/g; V_Total (cm³/g) ≥ 2; V_Micro (cm³/g) ≥ 1), micromesoporous (S_BET: >2500 m³/g; V_Total (cm³/g) ≥ 1.5; V_Micro (cm³/g) ≥ 0.7) and mesoporous (S_BET: >2500 m³/g; V_Total (cm³/g) ≥ 1.5; V_Micro (cm³/g) ≥ 0.5) NPCMs. Moreover, it was observed that a narrow pore size distribution (0.5-2.0 nm) yields excellent results in the remediation of noxious contaminants. Further, chemical activating agents such as NaOH, KOH, ZnCl₂, and H₃PO₄ were compared. It was observed that activating agents KОН, H₃PO₄, and ZnCl₂ were generally used and played a significant role in the possible large-scale production and commercialization of NPCMs. Thus, it can be interpreted that with a well-planned strategy for the synthesis, NPCMs with a "tuned" porosity for a specific application, in particular, microporosity for the accumulation and adsorption of energetically important gases (CO₂, CH₄, H₂), micro-mesoporosity and mesoporosity for high adsorption capacity for towards metal ions and a large number of dyes, respectively.

Preparation of polyvinylidene fluoride composite ultrafiltration membrane for micro-polluted surface water treatment

Blending modification of graphene oxide (GO) and deposition of silver carbonate (Ag₂CO₃) on the membrane surface by suction filtration was used to prepare polyvinylidene fluoride (PVDF) composite ultrafiltration (UF) membranes (denoted as PGA membranes). The effect of this strategy on the morphology and performance of the pure PVDF membrane was investigated. Owing to an increased hydrophilicity and the formation of a more open pore, the pollution resistance and permeability of the PGA membrane were improved. The pure water flux of the PGA-3 membrane (254 LMH) was increased to more than 2-fold compared to that of the neat PVDF membrane (126 LMH). In addition, the results of antifouling experiments showed that the flux recovery rate, flux decay rate, and antibacterial performance of the PGA-3 membrane was superior to those of the other membranes synthesized in this study. Finally, after conducting multi-cycle filtration experiments with lake water, the flux and recovery rate of the PGA-3 membrane was observed to be the highest, and the water quality of the lake water filtered by the PGA-3 membrane was the best. Thus, the above results indicate that this membrane modification strategy is extraordinarily effective in improving the antifouling properties and permeability of the PVDF UF membranes in practical applications.

Activated carbons from biomass-based sources for CO2 capture applications

In an ever-growing attempt to reduce the excessive anthropogenic CO₂ emissions, several CO₂ capture technologies have been developed in recent years. Adsorption using solid carbonaceous materials is one of the many promising examples of these technologies. Carbon-based materials, notably activated carbons, are considered very attractive adsorbents for this purpose given their exceptional thermal stability and excellent adsorption capacities. More importantly, the ability to obtain activated carbons from agricultural wastes and other biomass that are readily available makes them good candidates for several industrial applications ranging from wastewater treatment to CO₂ adsorption, among others. Activated carbons from biomass can be prepared using various techniques, resulting in a range of textual properties. They can also be functionalized by adding nitrogen-based groups to their structure that facilitates faster and more efficient CO₂ capture. This review provides a detailed overview of the recent work reported in this field, highlighting the different preparation methods and their differences and effects on the textual properties such as pore size, surface area, and adsorption performance in terms of the CO₂ adsorption capacity and isosteric heats. The prospect of activated carbon functionalization and its effect on CO₂ capture performance is also included. Finally, the review covers some of the pilot-plant scale processes in which these materials have been tested. Some identified gaps in the field have been highlighted, leading to the perspectives for future work.

Sustainable utilization of wetland biomass for activated carbon production: A review on recent advances in modification and activation methods

Constructed wetlands (CWs) as a green eco-technology have been applied for treating various wastewaters for several decades. However, sustainable reclamation of the harvested wetland biomass remains a challenge. Utilization of wetland biomass for value-added activated carbon (AC) production could be a potential strategy to improve the sustainability with multi-functions such as energy storage, resource recovery and environmental remediation. This paper aims to present a comprehensive review on the recent advances in production of ACs from wetland biomass and their application for adsorption of metal ions from wastewaters. The physicochemical properties of the ACs with chemical activations and their feasibility for heavy metal ions adsorption are compared, and the adsorption mechanisms are found to be complexation, physical adsorption, ion-exchange and electrostatic interactions. The surface chemistry of ACs impacted more on the adsorption ability towards heavy metal ions than their porosity. The in-situ modification during H₃PO₄ activation and new phosphorus-based activation are also summarized for enhancing the surface functionality and introducing specific surface functionalities on ACs, in turn promoting their adsorption ability for heavy metal ions. The high adsorption capacity and cost-effectiveness make these ACs as economical alternatives for waste remediation, and future research on the optimization and applications of ACs was also highlighted.

Valorization of crude olive stone in the removing of polyphenols from crude olive mill wastewater: kinetic, isotherm and mechanism study

Removal of polyphenols from crude olive mill wastewaters (COMWW) is vital to the development of olive industries. In addition, the exploitation of the residue of the olive oil industry such as crude olive stone (COS) constitutes a valorization of this substance and makes a contribution to the fight against environmental pollution. For this purpose, this study concerns the utilization of COS as an adsorbent of polyphenols from COMWW. The characterization of COS was realized by FTIR, XRD, SEM, PZN, BET and TGA-DTA. The adsorption kinetics and isotherms of polyphenols was analyzed by pseudo-first-order (PFO), pseudo-second-order (PSO), intraparticle diffusion models (MW) and nonlinear models of isotherms Langmuir (LM) and Freundlich (FM) respectively. This study goal at understanding the adsorption mechanism of polyphenols on COS by FTIR and XRD study. The results of adsorption kinetics demonstred that the adsorption capacity of polyphenols ‘PP’ onto COS is decreased from 381 mg g⁻¹ to 235 mg g⁻¹, with the increasing of the temperature, from 25 °C to 45 °C, indicating an exothermic process, which is confirmed by the negative values of enthalpy ΔH°. Moreover, the negative values of free energy ΔG° and entropy ΔS° indicate the spontaneous and ordered adsorption phenomenon. Kinetic and isotherms studies showed that polyphenols adsorption onto crude olive stone followed PSO kinetic, the FM and LM models were the best fitted. Consequently, this study indicates that crude olive stone could be used as a cheap adsorbent for removing of polyphenols from crude COMWW.

Development of Rubber Seed Shell–Activated Carbon Using Impregnated Pyridinium-Based Ionic Liquid for Enhanced CO2 Adsorption

In this study, rubber seed shell was used for the production of activated carbon by chemical activation using an ionic liquid, [C4Py][Tf2N] as an activating agent. Sample RSS-IL 800 shows the highest specific surface area of 393.99 m2/g, a total pore volume of 0.206 cm3/g, and a micropore volume of 0.172 cm3/g. The performance of AC samples as an adsorbent for CO2 was also studied using a static volumetric technique evaluated at a temperature of 25 °C and 1 bar pressure. The CO2 adsorption capacity for sample RSS-IL 800 was 2.436 mmol/g, comparable with reported data from the previous study. Results also show that the CO2 adsorption capacity decreased at a higher temperature between 50 and 100 °C and increased at elevated pressure due to its exothermic behavior. The Langmuir model fits the adsorption data well, and the isosteric heat of adsorption proved that the physisorption process and exothermic behavior occur.

Activated Olive Stones as a Low-Cost and Environmentally Friendly Adsorbent for Removing Cephalosporin C from Aqueous Solutions

In this paper, we describe the removal of cephalosporin C (CPC) from aqueous solutions by adsorption onto activated olive stones (AOS) in a stirred tank. For comparative purposes, several experiments of adsorption onto commercial granular activated carbon were carried out. A quantum study of the different species of cephalosporin C that, depending on the pH, exist in aqueous solution pointed to a favorable mass transfer process during adsorption. Activated olive stones were characterized by SEM, EDX and IR techniques and their pHzc was determined. A 10-3 M HCl cephalosporin C solution has been selected for the adsorption experiments because at the pH of that solution both electrostatic and hydrogen bond interactions are expected to be established between the adsorbate and the adsorbent. The adsorption process is best described by the Freundlich isotherm model and the pseudo-second-order kinetic model, while the adsorption mechanism is mainly controlled by film diffusion. Under the conditions studied, the adsorption process is of a physical nature, endothermic and spontaneous. Comparison of the adsorption results obtained in this paper with those of other authors shows that the efficiency of AOS is 20% of that of activated carbon but 65% higher than that of the XAD-2 adsorbent. Considering its low price, abundance, easy accessibility and eco-compatibility, the use of activated olive stones as adsorbents for the removal of emerging pollutants from aqueous solutions represents an interesting possibility from both the economic and the environmental points of view.

Elimination of organochlorine pesticides from water by a new activated carbon prepared from Phoenix dactylifera date stones

This work focused on the characterization of activated carbon (AC) prepared by pyrolysis-chemical activation with phosphoric acid (60%) from date stones derived from three categories of date palm Phoenix dactylifera (Ajwa, Anbari, Khudri), and on its feasibility of elimination of organochlorine pesticides (OCPs) in water samples. The obtained results showed that the three-produced AC date stone had developed a porous structure, large specific surface area, and acidic property. Due to the high SBET (> 1200 m²/g), Ajwa stones activated coal was considered as the best AC that can be used for the adsorption of environmental contaminants. The effects of several parameters such as the Ajwa AC dose, the time of contact, the initial concentration of pesticides, and the pH were evaluated. The results showed that the adsorption balance of organochlorine pesticides on this AC was reached after a contact time of 60 min at an optimal pHzpc equal to 2. In addition, 0.4 g of AC was the best quantity found to retain the largest quantity of pesticides while considering the economic part.

Application of Raw and Modified Pomegranate Peel for Wastewater Treatment: A Literature Overview and Analysis

The use of renewable substrates as biosorbents has a great attention in wastewater treatment. The pomegranate peel (PGP) constitutes one of these substrates. A review is carried out to investigate the potential of pomegranate peel (PGP) for wastewater treatment. Physical and chemical PGP properties are presented and compared to those of Tunisian pomegranate peel (El Gabsi). Raw and modified PGP performance and sorption capacity for metals, dyes, and organic pollutants are evaluated. Different experimental sorption conditions such as concentration, contact time, pH, temperature, and adsorbent dose used in the literature are illustrated. Studied and best-fitted kinetics and isotherm models to experimental data and thermodynamic parameters are compared. The effects of activating physical and/or chemical conditions on the activated PGP properties are presented. This paper reveals noteworthiness properties of raw PGP for wastewater treatment compared to this activated form. The comparison between activated and raw PGP morphology exhibits that the activation does not necessarily improve the PGP adsorption capacity. Despite a limited research carried out on the raw PGP biosorbent, it appears from this study that it has very good adsorption properties, making it a serious and low-cost renewable substrate toward practical applications in wastewater treatment compared to various other waste agricultural biomass.

Excellent adsorptive performance of a new nanocomposite for removal of toxic Pb(II) from aqueous environment: Adsorption mechanism and modeling analysis

Herein, a novel nanocomposite (Fe₃O₄@TATS@ATA) was prepared and used for adsorptive removal of Pb(II) ions from aqueous environment. The magnetic nanocomposite (Fe₃O₄@TATS@ATA) was characterized using FTIR, TEM, SEM, EDX, element mapping analysis (EMA), TGA analysis, XRD patterns, VSM, BET analysis, XPS spectrum, and zeta potential. The FTIR study confirmed the modification of Fe₃O₄ nanoparticles with triaminetriethoxysilane and 2-aminoterephthalic acid while XPS analysis (with peaks at 283.6, 285.1, 286.3, 284.5.0, 288.4 eV) displayed the presence of CSi, CN, OCNH, CC/CC and OCO functional groups, respectively on Fe₃O₄@TATS@ATA. The BET surface area, average pore size, pore volume and magnetization saturation for Fe₃O₄@TATS@ATA were found to be 114 m²/g, 6.4 nm, 0.054 cm^-3/g, and 22 emu/g, respectively. The adsorption isotherm data showed that Pb(II) adsorption onto Fe₃O₄@TATS@ATA fitted to Langmuir and Dubinin-Raduskevich isotherm model due to better R² value which was greater than 0.9 and q_m of Pb(II) was 205.2 mg/g at pH 5.7 in 150 min. Adsorption kinetics data displayed that Pb(II) adsorption onto Fe₃O₄@TATS@ATA was fitted to the pseudo-second-order and Elovich kinetic models. Thermodynamic outcomes exhibited the exothermic and spontaneous nature of adsorption. Results showed that Fe₃O₄@TATS@ATA nanocomposite was promising material for efficient removal of toxic Pb(II) from aqueous environment.

Dysprosium Removal from Water Using Active Carbons Obtained from Spent Coffee Ground

This paper describes the physicochemical study of the adsorption of dysprosium (Dy³⁺) in aqueous solution onto two types of activated carbons synthesized from spent coffee ground. Potassium hydroxide (KOH)-activated carbon is a microporous material with a specific Brunauer–Emmett–Teller (BET) surface area of 2330 m²·g⁻¹ and pores with a diameter of 3.2 nm. Carbon activated with water vapor and N₂ is a solid mesoporous, with pores of 5.7 nm in diameter and a specific surface of 982 m²·g⁻¹. A significant dependence of the adsorption capacity on the solution pH was found, but it does not significantly depend on the dysprosium concentration nor on the temperature. A maximum adsorption capacity of 31.26 mg·g⁻¹ and 33.52 mg·g⁻¹ for the chemically and physically activated carbons, respectively, were found. In both cases, the results obtained from adsorption isotherms and kinetic study were better a fit to the Langmuir model and pseudo-second-order kinetics. In addition, thermodynamic results indicate that dysprosium adsorption onto both activated carbons is an exothermic, spontaneous, and favorable process.

Potential of Punica granatum biochar to adsorb Cu(II) in soil

Biochar as a promising adsorbent to remove heavy metals has attracted much attention globally. One of the potential adsorbents is biochar derived from punica granatum peels, a growing but often wasted resource in tropical countries. However, the immobilization capacity of punica granatum peel biochar is not known. This study investigated the physicochemical properties of punica granatum peel boichars pyrolyzed at 300 °C and 600 °C (referred as BC300 and BC600), and the efficiency and mechanisms of Cu(II) adsorption of five types of material treatments: BC300, BC600, soil only, and soils with biochar amendment BC300 and BC600, respectively, at the rate of 1% of the soil by weight. The results show that BC300 had higher yield, volatile matter content and organic carbon content, and larger pore diameter, but less ash content, surface area, pH, and cation exchange capacity than BC600. The Cu(II) adsorption capacity onto biochars and soils with biochar were greatly influenced by initial ion concentration and contact time. The Cu(II) adsorption capacity of biochar, independent of pyrolysis temperature, was around 52 mg g⁻¹. The adsorption capacity of the soil amended with biochar nearly doubled (29.85 mg g⁻¹) compared to that of the original soil (14.99 mg g⁻¹), indicating superb synergetic adsorption capacity of the biochar-amended soils. The adsorption isotherms showed monolayer adsorption of Cu(II) on biochar, and co-existence of monolayer and multilayer adsorption in soils with or without biochar amendment. Results also suggest that the adsorption process is spontaneous and endothermic, and the rate-limiting phase of the sorption process is primarily chemical. This study demonstrates punica granatum peel biochar has a great potential as an adsorbent for Cu(II) removal in soil.

Basic red 2 and methyl violet adsorption by date pits: adsorbent characterization, optimization by RSM and CCD, equilibrium and kinetic studies

The potential of raw date pits as a natural, widely available and low-cost agricultural waste has been studied in order to adsorb cationic dyes from an aqueous solution. Date pits were characterized by FTIR, SEM, BET, and XRD analysis. To optimize removal of two industrial dyes, basic red 2 (BR2) and methyl violet (MV), from aqueous solution using date pits, response surface methodology (RSM) is employed. Tests were carried out as per central composite design (CCD) with four input parameters namely contact time, temperature, initial concentration of adsorbate, and pH. Second-order polynomial model better fits experimental data for BR2 and MV and optimum values were then determined. In the optimum conditions, kinetic study was conducted and the pseudo-second-order model was found the best fitted model compared to pseudo-first-order model. Moreover, it was shown that intraparticle diffusion was not the sole controlling step and could be associated with other transfer resistance. On other hand, equilibrium isotherms were obtained for BR2 and MV and their maximum adsorption capacities were 92 and 136 mg g^-1 respectively. Two-parameter isotherm models like Langmuir, Temkin, Freundlich, Dubinin-Radushkevich, and Halsay were investigated to fit equilibrium data. Three error functions of residual root mean square error, chi-square statistic, and average relative error were used to comfort us in the selected models, which were actually Dubinin-Radushkevich and Langmuir for BR2 and Frendlich, Temkin, and Halsay for MV.

Characterization of modified Alternanthera philoxeroides by diethylenetriamine and its application in the adsorption of copper(II) ions in aqueous solution

By a simple and convenient method of using epichlorohydrin as linkages, a novel Alternanthera philoxeroides (AP) derivative modified with diethylenetriamine (DAP) was synthesized, which can remove copper(II) ions (Cu(II)) in the water environment efficiently. The adsorption capacity of DAP for Cu(II) under various factors was measured using ultraviolet spectrophotometer. The adsorption capacity and removal ratio were 19.33 mg/g and 95.57% at pH 5.5 and 298 K. The kinetic and equilibrium study shows that pseudo-second-order kinetic (R² = 0.9964) and Langmuir isotherm models (R² > 0.982) could properly describe DAP adsorption behaviors, and thermodynamic parameters indicate a spontaneous endothermic process (ΔG = - 3.6636 kJ/mol). The combined results of SEM, XRD, FTIR, and XPS analyses reveal that the dominant contribution for enhancement in Cu(II) adsorption is made by the formation of an amino group. And the adsorption mechanism is mainly the complexation reaction. The adsorption efficiency of DAP remained above 72.06% after 6 cycles of adsorption-desorption, which indicated that DAP has good regenerability and stability. All the results suggest that DAP could serve as promising adsorbents for Cu(II) pollution minimization.

An overview of chlorophenols as contaminants and their removal from wastewater by adsorption: A review

In this review article, a significant number of published articles (over three decades) were consulted in order to provide comprehensive literature information about chlorophenols, their sources into the environment, classification, and toxicity, various wastewater treatment methods for their removal as well as the characteristics of their adsorption by various adsorbents. Organizing the scattered available information on a wide range of potentially effective adsorbents in the removal of chlorophenols is the principal objective of this article. Various adsorbents such as natural materials, waste materials from industries, agricultural by-products and biomass-based activated carbon in the removal of various chlorophenols have been compiled and discussed here. Crucial factors like temperature, solution pH, contact time and initial solution concentration are also reported and discussed here. The π-π dispersion interaction mechanism, hydrogen bonding formation mechanism, and the electron donor-acceptor complex mechanism were proposed for the chlorophenols adsorption onto various adsorbents with the help of current literature. Conclusions have been drawn proposing a few suggestions for future research on mitigating the effect of chlorophenols in the environment.

Stabilized landfill leachate treatment using Guadua amplexifolia bamboo as a source of activated carbon: kinetics study

In the present study, the characteristics of leachate generated from dumpsite called 'Zapote' located in southern region of Tamaulipas, Mexico were evaluated. The adsorption of non-biodegradable organic matter measured as chemical oxygen demand (COD), color and heavy metals from leachate on activated carbon (AC) prepared in acid media from Guadua amplexifolia bamboo has been studied. In addition, the computation of kinetic parameters during the adsorption process as well as the most probable mechanisms was determined. The ACs were analyzed by using scanning electron microscopy and Fourier transform infrared spectroscopy. The experimental data showed that the ACs removed up to 81.4% of color and reduced COD up to 91.6% after 9 h of reaction at 60°C. For heavy metals, the maximum adsorption uptake was achieved at pH = 8.0 within 20 min with removal percentages of 87.0% (Pb(II)), 43.0% (Cu(II)) and 30.5% (Ni(II)). A pseudo-second-order model explained the adsorption kinetics most effectively for Pb, Ni and Cu, while a pseudo-first order was found for Zn. The AC synthesized from the G. amplexifolia species could be potentially used as an effective adsorbent in the reduction of COD, and removal of color and heavy metals.

Use of rice husk in waste cooking oil pretreatment

Since industrial wastes are increasing, the development of studies to find ways for their use is urgent. Waste cooking oil is an important source for the production of biodiesel, one of the main biofuels in Brazil. However, during cooking, the oil undergoes conditions that change its properties and decrease its quality, such as its acidity value. Current research treats waste cooking oil by the adsorption process using rice husk, an agro-industrial waste, and activated carbon to compare results. The potential of the adsorbents to remove free fatty acids in waste cooking oil has been investigated by the batch technique, evaluating different operating conditions of temperature, adsorbent mass and agitation. Adsorbents were characterized by nitrogen physisorption, scanning electron microscope, energy-dispersive spectroscopy and X-ray diffraction. The maximum result obtained for activated carbon at acidity reduction was 63%, using 22.4°C, 169.64 rpm and 3.39 g of adsorbent mass. Already, using the rice husk the percentage of removal was the same, 63% using 22.4°C, 80.36 rpm and 1.61 g of adsorbent, however in shorter times. The results prove that the application of the rice husk for this purpose is advantageous, for being a low-cost material, available on a large scale and that provide results similar to activated carbon.

Dynamics and Kinetics of Cupric Ion Removal from Wastewaters by Tunisian Solid Crude Olive-Oil Waste

The present paper aims to develop a low cost, efficient, and environmentally-friendly process to purify (industrial) waters contaminated by copper by the use of oil mill wastes, through kinetic, thermodynamic, and equilibrium investigations. To do so, the raw adsorbent was characterized using different analytical techniques including X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. Then, the interaction between copper and olive residues were examined during batch adsorption tests at various operating parameters, such as pH, initial concentration, contact time, and particle size. Kinetic data were best fitted with Broeurs-Sotolongo kinetic model. Additionally, it was found that film and intraparticle diffusion steps controlled simultaneously the mass transfer of copper onto olive mill solid waste. Among the eight tested models, Broeurs-Sotolongo isotherm suited the most the sorption, with regards to the function errors analysis. It was deduced that the adsorption of copper does not involve chemical bonds with high energy which allows easier regeneration steps and higher number of biosorbent regeneration cycles without any need for applying high temperature in the desorption reaction systems. The adsorption capacity (18.93 mg/g) calculated on the basis of this model was close to the experimental value (18.4 mg/g) but more interestingly it brought up that 50% of the generated amounts of olive wastes in Tunisia could eliminate 1.84 kTons of copper from industrial waters.

Removal of heavy metals from aqueous solution using chitosan-combined magnetic biochars

The use of chitosan combined with magnetic Loofah biochar (CMLB) was investigated for the removal of Cr(VI) and Cu(II) from aqueous solution. The modified biochar had higher Cr(VI) and Cu(II) adsorption capacity than that of pristine biochar. 40%-CMLB showed high Cr(VI) and Cu(II) adsorption capacity of 30.14 mg/g, and 54.68 mg/g, respectively. Adsorption reached equilibrium within 18 h. The study found that the experimental data showed the best fit for the pseudo-second-order kinetic model and Freundlich model. Additionally, after three reuse cycles, Cr(VI) and Cu(II) adsorption capacity by CMLB were 23.34 mg/g and 42.6 mg/g, respectively. XPS results indicated that ion exchange and surface complexation were the primary mechanisms for Cr(VI) and Cu(II) adsorption.

Sustainable technologies for water purification from heavy metals: review and analysis

We review and analyze current water purification technologies in the context of sustainability, and we introduce the Ranking Efficiency Product (REP) index, to evaluate their efficiency and implementation in this broader perspective.

Review of Heavy Metal Adsorption Processes by Several Organic Matters from Wastewaters

Heavy metal contamination of natural rivers and wastewaters is a problem for both the environment and human society. The accumulation and adsorption of heavy metals could happen with several organic and inorganic matters, but the most used adsorbents are (biological and chemical) organic compounds. This review article presents the basics of heavy metal adsorption on several organic surfaces. There are many organic matters, which seem to be useful as agents for heavy metal adsorption. All of the cited authors and articles present the adsorption kinetics by the most used isotherm models (such as Langmuir and Freundlich isotherms). By comparing several research results presented by a pre-selected assortment of papers, we would like to give an overview of the microbiological, organic chemical, and other surface adsorption possibilities. We draw conclusions for two new adsorption fields (adsorption with biosorbent and artificial materials). We present an optional possibility to study adsorption kinetics, efficiency and regeneration methods to successfully conclude the heavy metal treatment process, and we make some recommendations about the efficient water usage calculations using the water allowance coefficient (WAC) indicator.