1
|
Hammami I, Jakka SK, Sá-Nogueira I, Borges JP, Graça MPF. The Effect of Iron Oxide Insertion on the In Vitro Bioactivity, and Antibacterial Properties of the 45S5 Bioactive Glass. Biomimetics (Basel) 2024; 9:325. [PMID: 38921205 PMCID: PMC11201570 DOI: 10.3390/biomimetics9060325] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2024] [Revised: 05/24/2024] [Accepted: 05/27/2024] [Indexed: 06/27/2024] Open
Abstract
The aging population and increasing incidence of trauma among younger age groups have heightened the increasing demand for reliable implant materials. Effective implant materials must demonstrate rapid osseointegration and strong antibacterial properties to ensure optimal patient outcomes and decrease the chance of implant rejection. This study aims to enhance the bone-implant interface by utilizing 45S5 bioglass modified with various concentrations of Fe3O4 as a coating material. The effect of the insertion of Fe3O4 into the bioglass structure was studied using Raman spectroscopy which shows that with the increase in Fe3O4 concentration, new vibration bands associated with Fe-related structural units appeared within the sample. The bioactivity of the prepared glasses was evaluated using immersion tests in simulated body fluid, revealing the formation of a calcium phosphate-rich layer within 24 h on the samples, indicating their potential for enhanced tissue integration. However, the sample modified with 8 mol% of Fe3O4 showed low reactivity, developing a calcium phosphate-rich layer within 96 h. All the bioglasses showed antibacterial activity against the Gram-positive and Gram-negative bacteria. The modified bioglass did not present significant antibacterial properties compared to the bioglass base.
Collapse
Affiliation(s)
- Imen Hammami
- I3N and Physics Department, Aveiro University, 3810-193 Aveiro, Portugal; (I.H.); (S.K.J.)
| | - Suresh Kumar Jakka
- I3N and Physics Department, Aveiro University, 3810-193 Aveiro, Portugal; (I.H.); (S.K.J.)
| | - Isabel Sá-Nogueira
- Associate Laboratory i4HB—Institute for Health and Bioeconomy, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal;
- UCIBIO—Applied Molecular Biosciences Unit, Department of Life Sciences, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal
| | - João Paulo Borges
- I3N-CENIMAT and Materials Science Department, NOVA School of Science and Technology, Campus de Caparica, Nova University Lisbon, 2829-516 Caparica, Portugal;
| | | |
Collapse
|
2
|
Yang M, Wei Y, Reineck P, Ebendorff-Heidepriem H, Li J, McLaughlin RA. Development of a glass-based imaging phantom to model the optical properties of human tissue. BIOMEDICAL OPTICS EXPRESS 2024; 15:346-359. [PMID: 38223187 PMCID: PMC10783914 DOI: 10.1364/boe.504774] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 09/21/2023] [Revised: 11/30/2023] [Accepted: 12/03/2023] [Indexed: 01/16/2024]
Abstract
The fabrication of a stable, reproducible optical imaging phantom is critical to the assessment and optimization of optical imaging systems. We demonstrate the use of an alternative material, glass, for the development of tissue-mimicking phantoms. The glass matrix was doped with nickel ions to approximate the absorption of hemoglobin. Scattering levels representative of human tissue were induced in the glass matrix through controlled crystallization at elevated temperatures. We show that this type of glass is a viable material for creating tissue-mimicking optical phantoms by providing controlled levels of scattering and absorption with excellent optical homogeneity, long-term stability and reproducibility.
Collapse
Affiliation(s)
- Mingze Yang
- School of Biomedicine, The University of Adelaide, Adelaide, SA, Australia
- Institute for Photonics and Advanced Sensing, The University of Adelaide, Adelaide, SA, Australia
| | - Yunle Wei
- Institute for Photonics and Advanced Sensing, The University of Adelaide, Adelaide, SA, Australia
- School of Physics, Chemistry and Earth Sciences, The University of Adelaide, Adelaide, SA, Australia
| | - Philipp Reineck
- School of Science, RMIT University, Melbourne, VIC, Australia
| | - Heike Ebendorff-Heidepriem
- Institute for Photonics and Advanced Sensing, The University of Adelaide, Adelaide, SA, Australia
- School of Physics, Chemistry and Earth Sciences, The University of Adelaide, Adelaide, SA, Australia
| | - Jiawen Li
- Institute for Photonics and Advanced Sensing, The University of Adelaide, Adelaide, SA, Australia
- School of Electrical and Mechanical Engineering, The University of Adelaide, Adelaide, SA, Australia
| | - Robert A. McLaughlin
- School of Biomedicine, The University of Adelaide, Adelaide, SA, Australia
- Institute for Photonics and Advanced Sensing, The University of Adelaide, Adelaide, SA, Australia
| |
Collapse
|
3
|
Sobhani A, Salimi E. Low temperature preparation of diopside nanoparticles: in-vitro bioactivity and drug loading evaluation. Sci Rep 2023; 13:16330. [PMID: 37770584 PMCID: PMC10539512 DOI: 10.1038/s41598-023-43671-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2023] [Accepted: 09/27/2023] [Indexed: 09/30/2023] Open
Abstract
Bioactive diopside (CaMgSi2O6) nanoparticles have recently gained potential usefulness as bone replacement materials and nano vehicles for delivering therapeutics. The structural characteristics of this ceramic have found to be a key factor in bone bonding ability. To attain the desired product for 100% clinical success, it is important to realize the relationship between structure and biological activity. Synthesis of these nanoparticles via the solid-state method has been regarded as a low-cost and easy process in large-scale, but time consuming reactions and high temperature (≈ 1400 °C) are required. On the other side, the wet chemistry can overcome these drawbacks, whereas the presence of byproducts in the final powder has limited this method in large-scale production. The present document has represented a simple, fast and one-pot sol-gel approach for the synthesis of highly pure diopside nano-powders (< 20 nm) by using not-expensive precursors. Calcination of the obtained powder has been conducted at various temperatures (700, 1000 and 1200 °C). The physicochemical and microstructural properties of the products have been characterized by XRD, FTIR, FESEM and TEM. Moreover, the impact of the crystallinity on the bioactivity, drug loading capacity and drug release behavior of the synthesized nanoparticles have been investigated here for the first time. The in-vitro bioactivity results of the prepared diopside samples in a simulated body fluid (SBF) at 37 °C revealed the higher capability of the sintered sample to deposit calcium phosphate, compared with the amorphous one. High quantity of gentamicin (around 10 µg) could attach to the surface of 1 miligram of the sintered diopside during the early stages of contact (3 h), suggesting the potential use of diopside as a new class of nano-vehicles for antibiotics. The release behavior indicated a sustained release of gentamicin (80%) after 24 h. In conclusion, diopside nanoparticles can be a promising candidate as a drug-vehicle for bone filling, implant coating or bone cement applications.
Collapse
Affiliation(s)
- Ava Sobhani
- Faculty of Chemical and Materials Engineering, Shahrood University of Technology, P. O. Box: 3619995161, Shahrood, Iran
| | - Esmaeil Salimi
- Faculty of Chemical and Materials Engineering, Shahrood University of Technology, P. O. Box: 3619995161, Shahrood, Iran.
| |
Collapse
|
4
|
Hammami I, Gavinho SR, Jakka SK, Valente MA, Graça MPF, Pádua AS, Silva JC, Sá-Nogueira I, Borges JP. Antibacterial Biomaterial Based on Bioglass Modified with Copper for Implants Coating. J Funct Biomater 2023; 14:369. [PMID: 37504864 PMCID: PMC10381177 DOI: 10.3390/jfb14070369] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2023] [Revised: 07/07/2023] [Accepted: 07/12/2023] [Indexed: 07/29/2023] Open
Abstract
Biofilm-related implant infections pose a substantial threat to patients, leading to inflammation in the surrounding tissue, and often resulting in implant loss and the necessity for additional surgeries. Overcoming this implantology challenge is crucial to ensure the success and durability of implants. This study shows the development of antibacterial materials for implant coatings by incorporating copper into 45S5 Bioglass®. By combining the regenerative properties of Bioglass® with the antimicrobial effects of copper, this material has the potential to prevent infections, enhance osseointegration and improve the long-term success of implants. Bioglasses modified with various concentrations of CuO (from 0 to 8 mol%) were prepared with the melt-quenching technique. Structural analysis using Raman and FTIR spectroscopies did not reveal significant alterations in the bioglasses structure with the addition of Cu. The antibacterial activity of the samples was assessed against Gram-positive and Gram-negative bacteria, and the results demonstrated significant inhibition of bacterial growth for the bioglass with 0.5 mol% of CuO. Cell viability studies indicated that the samples modified with up to 4 mol% of CuO maintained good cytocompatibility with the Saos-2 cell line at extract concentrations up to 25 mg/mL. Furthermore, the bioactivity assessment demonstrated the formation of a calcium phosphate (CaP)-rich layer on the surfaces of all bioglasses within 24 h. Our findings show that the inclusion of copper in the bioglass offers a significant enhancement in its potential as a coating material for implants, resulting in notable advancements in both antibacterial efficacy and osteointegration properties.
Collapse
Affiliation(s)
- Imen Hammami
- I3N and Physics Department, Aveiro University, 3810-193 Aveiro, Portugal
| | | | - Suresh Kumar Jakka
- I3N and Physics Department, Aveiro University, 3810-193 Aveiro, Portugal
| | | | | | - Ana Sofia Pádua
- I3N-CENIMAT and Physics Department, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal
| | - Jorge Carvalho Silva
- I3N-CENIMAT and Physics Department, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal
| | - Isabel Sá-Nogueira
- Associate Laboratory i4HB-Institute for Health and Bioeconomy, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal
- UCIBIO-Applied Molecular Biosciences Unit, Department of Life Sciences, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal
| | - João Paulo Borges
- I3N-CENIMAT and Materials Science Department, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal
| |
Collapse
|
5
|
Hammami I, Gavinho SR, Pádua AS, Sá-Nogueira I, Silva JC, Borges JP, Valente MA, Graça MPF. Bioactive Glass Modified with Zirconium Incorporation for Dental Implant Applications: Fabrication, Structural, Electrical, and Biological Analysis. Int J Mol Sci 2023; 24:10571. [PMID: 37445749 DOI: 10.3390/ijms241310571] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/29/2023] [Revised: 06/15/2023] [Accepted: 06/21/2023] [Indexed: 07/15/2023] Open
Abstract
Implantology is crucial for restoring aesthetics and masticatory function in oral rehabilitation. Despite its advantages, certain issues, such as bacterial infection, may still arise that hinder osseointegration and result in implant rejection. This work aims to address these challenges by developing a biomaterial for dental implant coating based on 45S5 Bioglass® modified by zirconium insertion. The structural characterization of the glasses, by XRD, showed that the introduction of zirconium in the Bioglass network at a concentration higher than 2 mol% promotes phase separation, with crystal phase formation. Impedance spectroscopy was used, in the frequency range of 102-106 Hz and the temperature range of 200-400 K, to investigate the electrical properties of these Bioglasses, due to their ability to store electrical charges and therefore enhance the osseointegration capacity. The electrical study showed that the presence of crystal phases, in the glass ceramic with 8 mol% of zirconium, led to a significant increase in conductivity. In terms of biological properties, the Bioglasses exhibited an antibacterial effect against Gram-positive and Gram-negative bacteria and did not show cytotoxicity for the Saos-2 cell line at extract concentrations up to 25 mg/mL. Furthermore, the results of the bioactivity test revealed that within 24 h, a CaP-rich layer began to form on the surface of all the samples. According to our results, the incorporation of 2 mol% of ZrO2 into the Bioglass significantly improves its potential as a coating material for dental implants, enhancing both its antibacterial and osteointegration properties.
Collapse
Affiliation(s)
- Imen Hammami
- I3N and Physics Department, Aveiro University, 3810-193 Aveiro, Portugal
| | | | - Ana Sofia Pádua
- I3N-CENIMAT and Physics Department, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal
| | - Isabel Sá-Nogueira
- Associate Laboratory i4HB-Institute for Health and Bioeconomy, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal
- UCIBIO-Applied Molecular Biosciences Unit, Department of Life Sciences, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal
| | - Jorge Carvalho Silva
- I3N-CENIMAT and Physics Department, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal
| | - João Paulo Borges
- I3N-CENIMAT and Materials Science Department, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal
| | | | | |
Collapse
|
6
|
Gavinho SR, Pádua AS, Sá-Nogueira I, Silva JC, Borges JP, Costa LC, Graça MPF. Fabrication, Structural and Biological Characterization of Zinc-Containing Bioactive Glasses and Their Use in Membranes for Guided Bone Regeneration. MATERIALS (BASEL, SWITZERLAND) 2023; 16:956. [PMID: 36769963 PMCID: PMC9919611 DOI: 10.3390/ma16030956] [Citation(s) in RCA: 4] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/13/2022] [Revised: 01/11/2023] [Accepted: 01/17/2023] [Indexed: 06/18/2023]
Abstract
Polymeric membranes are widely used in guided bone regeneration (GBR), particularly in dentistry. In addition, bioactive glasses can be added to the polymers in order to develop a matrix that is osteoconductive and osteoinductive, increasing cell adhesion and proliferation. The bioactive glasses allow the insertion into its network of therapeutic ions in order to add specific biological properties. The addition of zinc into bioactive glasses can promote antibacterial activity and induce the differentiation and proliferation of the bone cells. In this study, bioactive glasses containing zinc (0.25, 0.5, 1 and 2 mol%) were developed and structurally and biologically characterized. The biological results show that the Zn-containing bioactive glasses do not present significant antibacterial activity, but the addition of zinc at the highest concentration does not compromise the bioactivity and promotes the viability of Saos-2 cells. The cell culture assays in the membranes (PCL, PCL:BG and PCL:BGZn2) showed that zinc addition promotes cell viability and an increase in alkaline phosphatase (ALP) production.
Collapse
Affiliation(s)
- Sílvia R. Gavinho
- I3N and Physics Department, Aveiro University, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
| | - Ana Sofia Pádua
- I3N-CENIMAT and Physics Department, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal
| | - Isabel Sá-Nogueira
- Associate Laboratory i4HB, Institute for Health and Bioeconomy, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal
- UCIBIO—Applied Molecular Biosciences Unit, Department of Life Sciences, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal
| | - Jorge C. Silva
- I3N-CENIMAT and Physics Department, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal
| | - João P. Borges
- I3N-CENIMAT and Materials Science Department, NOVA School of Science and Technology, Campus de Caparica, 2829-516 Caparica, Portugal
| | - Luis C. Costa
- I3N and Physics Department, Aveiro University, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
| | - Manuel Pedro F. Graça
- I3N and Physics Department, Aveiro University, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
| |
Collapse
|
7
|
Gavinho SR, Pádua AS, Sá-Nogueira I, Silva JC, Borges JP, Costa LC, Graça MPF. Biocompatibility, Bioactivity, and Antibacterial Behaviour of Cerium-Containing Bioglass ®. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:nano12244479. [PMID: 36558332 PMCID: PMC9783236 DOI: 10.3390/nano12244479] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2022] [Revised: 12/12/2022] [Accepted: 12/14/2022] [Indexed: 05/31/2023]
Abstract
The main reason for the increased use of dental implants in clinical practice is associated with aesthetic parameters. Implants are also presented as the only technique that conserves and stimulates natural bone. However, there are several problems associated with infections, such as peri-implantitis. This disease reveals a progressive inflammatory action that affects the hard and soft tissues surrounding the implant, leading to implant loss. To prevent the onset of this disease, coating the implant with bioactive glasses has been suggested. In addition to its intrinsic function of promoting bone regeneration, it is also possible to insert therapeutic ions, such as cerium. Cerium has several advantages when the aim is to improve osseointegration and prevent infectious problems with dental implant placement. It promotes increased growth and the differentiation of osteoblasts, improves the mechanical properties of bone, and prevents bacterial adhesion and proliferation that may occur on the implant surface. This antibacterial effect is due to its ability to disrupt the cell wall and membrane of bacteria, thus interfering with vital metabolic functions such as respiration. In addition, its antioxidant effect reverses oxidative stress after implantation in bone. In this work, Bioglass 45S5 with CeO2 with different percentages (0.25, 0.5, 1, and 2 mol%) was developed by the melt-quenching method. The materials were analyzed in terms of morphological, structural, and biological (cytotoxicity, bioactivity, and antibacterial activity) properties. The addition of cerium did not promote structural changes to the bioactive glass, which shows no cytotoxicity for the Saos-2 cell line up to 25 mg/mL of extract concentration for all cerium contents. For the maximum cerium concentration (2 mol%) the bioactive glass shows an evident inhibitory effect for Escherichia coli and Streptococcus mutans bacteria. Furthermore, all samples showed the beginning of the deposition of a CaP-rich layer on the surface of the material after 24 h.
Collapse
Affiliation(s)
- Sílvia R. Gavinho
- I3N and Physics Department, Aveiro University, 3810-193 Aveiro, Portugal
| | - Ana Sofia Pádua
- I3N-CENIMAT, New University of Lisbon, 2825-097 Caparica, Portugal
| | - Isabel Sá-Nogueira
- Associate Laboratory i4HB—Institute for Health and Bioeconomy, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal
- UCIBIO—Applied Molecular Biosciences Unit, Department of Life Sciences, NOVA School of Science and Technology, NOVA University Lisbon, 2819-516 Caparica, Portugal
| | - Jorge C. Silva
- I3N-CENIMAT, New University of Lisbon, 2825-097 Caparica, Portugal
| | - João P. Borges
- I3N-CENIMAT, New University of Lisbon, 2825-097 Caparica, Portugal
| | - Luis C. Costa
- I3N and Physics Department, Aveiro University, 3810-193 Aveiro, Portugal
| | | |
Collapse
|
8
|
El Baakili S, El Mabrouk K, Bricha M. Acellular bioactivity and drug delivery of new strontium doped bioactive glasses prepared through a hydrothermal process. RSC Adv 2022; 12:15361-15372. [PMID: 35693223 PMCID: PMC9119053 DOI: 10.1039/d2ra02416k] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2022] [Accepted: 05/15/2022] [Indexed: 11/21/2022] Open
Abstract
This work aims to study the kinetics of apatite layer formation on the surface of strontium doped binary bioactive glasses (BG: 63S37C) prepared for the first time by a hydrothermal process and evaluate their potential for drug loading and release using ibuprofen (IBU) as an anti-inflammatory drug vector. First, the binary glass 63S37C was doped with various amounts of strontium, from 0.2 to 1 mol%. Subsequently, the amorphous state of the samples and the microstructure were assessed by TGA, XRD, FTIR, ICP-AES, and SEM-EDS. Next, the in vitro bioactivity was evaluated by following the surface morphology and composition changes of soaked samples for up to 14 days at 37 °C in simulated bodily fluid (SBF). Finally, SEM-EDS spectroscopy showed clearly the appearance of needle-shaped apatite on amorphous glass substrates at the earlier stages of immersion for bioglasses doped with strontium. These findings are also confirmed with XRD and FTIR analysis. Furthermore, 63S37C BG proved that the drug release increased with increasing strontium content. Altogether, this novel class of bioactive glasses may be considered to have a promising future for biomedical applications.
Collapse
Affiliation(s)
- Salwa El Baakili
- Euromed Research Center, Euromed Engineering Faculty, Euromed University of Fes, Eco-Campus Fes-Meknes Road 30030 Fes Morocco
| | - Khalil El Mabrouk
- Euromed Research Center, Euromed Engineering Faculty, Euromed University of Fes, Eco-Campus Fes-Meknes Road 30030 Fes Morocco
| | - Meriame Bricha
- Euromed Research Center, Euromed Engineering Faculty, Euromed University of Fes, Eco-Campus Fes-Meknes Road 30030 Fes Morocco
| |
Collapse
|
9
|
Sugumaran V, Krishnamoorthy E, Kamalakkannan A, Ramachandran RC, Subramanian B. Unscrambling the Influence of Sodium Cation on the Structure, Bioactivity, and Erythrocyte Compatibility of 45S5 Bioactive Glass. ACS APPLIED BIO MATERIALS 2022; 5:1576-1590. [PMID: 35362945 DOI: 10.1021/acsabm.1c01322] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
The 45S5 bioglass uttering Class A bioactivity promotes both osteoconduction as well as osteoinduction. Though one of the higher reactive bioactive materials known with structural and physiological influence upon ionic modulation, poor mechanical properties are perceived. The possible solution to overcome the weak stability is to choose material's composition that provides retained bioactivity and improved mechanical stability. Meanwhile, primary burst out of Na+ ions increases the local pH, harms cell life, and acts as a well-known disruptive modifying species that weakens the bioactive glass network, decreasing network connectivity, showing faster degradation and lowering mechanical stability. Therefore, in this study, more detailed systematic exploration on structural influence of sodium monovalent cation and its behavior on physiological environment was genuinely studied and reported that bioactivity of the bioactive glass can be highly achieved even without Na+ ions. The result exhibits benefits of sodium free bioactive glass (denoted as No Na+ BG) over Na+ BG and exhibits improved mechanical stability and also possible degradability, having in-built apatite phase even before immersion in simulated body fluid (SBF). Also, sodium free bioglass proved as a superior candidate for erythrocyte compatibility with rapid clotting tendency on interaction with blood and a promising replacement for 45S5 bioglass in all aspects especially in mechanical stability view, which can withstand more than 5 months in phosphate buffer saline (PBS).
Collapse
Affiliation(s)
- Vijayakumari Sugumaran
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy Campus, Chennai, Tamilnadu 600025, India
| | - Elakkiya Krishnamoorthy
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy Campus, Chennai, Tamilnadu 600025, India
| | - Annamalai Kamalakkannan
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy Campus, Chennai, Tamilnadu 600025, India
| | - Riju Chandran Ramachandran
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy Campus, Chennai, Tamilnadu 600025, India
| | - Balakumar Subramanian
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy Campus, Chennai, Tamilnadu 600025, India
| |
Collapse
|
10
|
SarmastSh M, George S, Dayang Radiah C, Hoey D, Abdullah N, Kamarudin S. Synthesis of bioactive glass using cellulose nano fibre template. J Mech Behav Biomed Mater 2022; 130:105174. [DOI: 10.1016/j.jmbbm.2022.105174] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/16/2021] [Revised: 03/08/2022] [Accepted: 03/11/2022] [Indexed: 10/18/2022]
|
11
|
Preparation of a PLGA-coated porous bioactive glass scaffold with improved mechanical properties for bone tissue engineering approaches. REGENERATIVE ENGINEERING AND TRANSLATIONAL MEDICINE 2021. [DOI: 10.1007/s40883-021-00196-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
12
|
S C, S B. Insight into the impingement of different sodium precursors on structural, biocompatible, and hemostatic properties of bioactive materials. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2021; 123:111959. [PMID: 33812587 DOI: 10.1016/j.msec.2021.111959] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/24/2020] [Revised: 01/30/2021] [Accepted: 02/08/2021] [Indexed: 11/27/2022]
Abstract
Bioactive materials play a significant role in biomedical engineering for plethora of applications. To date, there is no evident report on the role of sodium precursors in structural changes towards their acceleration in biocompatibility. This study highlights the impact and role of two different sodium precursors (sodium nitrate and sodium hydroxide) on the structural changes and their potential formulations in biomineralization and biocompatibility. Structural characteristics enunciate the significant crystallization of NaCaPO4, Na2Ca2Si3O9, and Na1.8Ca1.1Si6O14 phases with pertinent Q2 stretching's while using sodium nitrate than sodium hydroxide. XPS spectra authenticate the elevated sodium content while using sodium nitrate as sodium precursor. One-dimensional structures with well faceted morphology and superior alkaline environment preferentially support the biomineralization and bactericidal properties in sodium nitrate-bioglass, was confirmed through structural, morphological, elemental, and antibacterial investigations. Whereas, higher blood and cell-line compatibility with elevated protein adsorption rate is perceived for the bioglass prepared using sodium hydroxide source, and subsequently, higher hemostatic properties are considerably observed with sodium nitrate-bioglass. Higher mechanical stability (ultrasonic measurements) and controlled degradation rate are the stratagems of sodium nitrate to boost the basic criteria of bioactive materials. Hence, it is proposed that sodium nitrate is a highly preferable source to develop bioactive and stable bioglass formulations.
Collapse
Affiliation(s)
- Chitra S
- National Centre for Nanoscience and Nanotechnology, University of Madras, Chennai 600025, India
| | - Balakumar S
- National Centre for Nanoscience and Nanotechnology, University of Madras, Chennai 600025, India.
| |
Collapse
|
13
|
Riju Chandran R, Chitra S, Vijayakumari S, Bargavi P, Balakumar S. Cognizing the crystallization aspects of NaCaPO 4 concomitant 53S bioactive-structures and their imprints in in vitro bio-mineralization. NEW J CHEM 2021. [DOI: 10.1039/d1nj01058a] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Abstract
Compositional and bio-physico-chemical characteristic features of bioactive glasses are of great importance in biomedical field.
Collapse
Affiliation(s)
- R. Riju Chandran
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy campus, Chennai 600 025, India
| | - S. Chitra
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy campus, Chennai 600 025, India
| | - S. Vijayakumari
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy campus, Chennai 600 025, India
| | - P. Bargavi
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy campus, Chennai 600 025, India
| | - S. Balakumar
- National Centre for Nanoscience and Nanotechnology, University of Madras, Guindy campus, Chennai 600 025, India
| |
Collapse
|
14
|
Sintering Behavior of a Six-Oxide Silicate Bioactive Glass for Scaffold Manufacturing. APPLIED SCIENCES-BASEL 2020. [DOI: 10.3390/app10228279] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
The intrinsic brittleness of bioactive glasses (BGs) is one of the main barriers to the widespread use of three-dimensional porous BG-derived bone grafts (scaffolds) in clinical practice. Among all the available strategies for improving the mechanical properties of BG-based scaffolds, strut densification upon sintering treatments at high temperatures represents a relatively easy approach, but its implementation might lead to undesired and poorly predictable decrease in porosity, mass transport properties and bioactivity resulting from densification and devitrification phenomena occurring in the material upon heating. The aim of the present work was to investigate the sinter-crystallization of a highly bioactive SiO2-P2O5-CaO–MgO–Na2O–K2O glass (47.5B composition) in reference to its suitability for the fabrication of bonelike foams. The thermal behavior of 47.5B glass particles was investigated upon sintering at different temperatures in the range of 600–850 °C by means of combined thermal analyses (differential thermal analysis (DTA) and hot-stage microscopy (HSM)). Then, XRD measurements were carried out to identify crystalline phases developed upon sintering. Finally, porous scaffolds were produced by a foam replica method in order to evaluate the effect of the sintering temperature on the mechanical properties under compression loading conditions. Assessing a relationship between mechanical properties and sintering temperature, or in other words between scaffold performance and fabrication process, is a key step towards the rationale design of optimized scaffolds for tissue repair.
Collapse
|
15
|
Suárez M, Fernández-García E, Fernández A, López-Píriz R, Díaz R, Torrecillas R. Novel antimicrobial phosphate-free glass-ceramic scaffolds for bone tissue regeneration. Sci Rep 2020; 10:13171. [PMID: 32826917 PMCID: PMC7442813 DOI: 10.1038/s41598-020-68370-y] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/31/2020] [Accepted: 06/24/2020] [Indexed: 12/25/2022] Open
Abstract
In this study a phosphate-free glass-ceramic porous scaffold was synthesized by a three-step methodology involving slurry preparation, induction of porosity by surfactant-assisted foaming following by freeze-drying and sintering. This inorganic scaffold was characterized by X-ray diffraction, scanning electron microscope (SEM), degradation and bioactivity. Thermal treatment at 750 °C showed two new crystalline phases, combeite and nepheline, into the glassy matrix responsible for its properties. The cell response of the scaffold was also evaluated for using as a bone graft substitute. A commercial Biphasic Calcium Phosphate, BCP, scaffold was assessed in parallel as reference material. Microstructures obtained by SEM showed the presence of macro, meso and microporosity. The glass-ceramic scaffold possesses an interconnected porosity around 31% with a crack-pore system that promote the protein adsorption and cell attachment. Glass-ceramic scaffold with high concentration of calcium ions shows an antimicrobial behavior against Escherichia coli after 24 h of contact. Nepheline phase present in the glass-ceramic structure is responsible for its high mechanical properties being around 87 MPa. Glass-ceramic scaffold promotes greater protein adsorption and therefore the attachment, spreading and osteodifferentiation of Adipose Derived Stem Cells than BCP scaffold. A higher calcification was induced by glass-ceramic scaffold compared to reference BCP material.
Collapse
Affiliation(s)
- M Suárez
- Nanomaterials and Nanotechnology Research Center (CINN-CSIC), Universidad de Oviedo (UO), Principado de Asturias, Avda de la Vega 4-6, 33940, El Entrego, Spain.
- Instituto de Investigación Sanitaria del Principado de Asturias, Av. Roma, s/n, 33011, Oviedo, Asturias, Spain.
| | - E Fernández-García
- Nanomaterials and Nanotechnology Research Center (CINN-CSIC), Universidad de Oviedo (UO), Principado de Asturias, Avda de la Vega 4-6, 33940, El Entrego, Spain
| | - A Fernández
- Nanomaterials and Nanotechnology Research Center (CINN-CSIC), Universidad de Oviedo (UO), Principado de Asturias, Avda de la Vega 4-6, 33940, El Entrego, Spain
- Instituto de Investigación Sanitaria del Principado de Asturias, Av. Roma, s/n, 33011, Oviedo, Asturias, Spain
| | - R López-Píriz
- Nanomaterials and Nanotechnology Research Center (CINN-CSIC), Universidad de Oviedo (UO), Principado de Asturias, Avda de la Vega 4-6, 33940, El Entrego, Spain
| | - R Díaz
- Nanomaterials and Nanotechnology Research Center (CINN-CSIC), Universidad de Oviedo (UO), Principado de Asturias, Avda de la Vega 4-6, 33940, El Entrego, Spain
- Instituto de Investigación Sanitaria del Principado de Asturias, Av. Roma, s/n, 33011, Oviedo, Asturias, Spain
| | - R Torrecillas
- Nanomaterials and Nanotechnology Research Center (CINN-CSIC), Universidad de Oviedo (UO), Principado de Asturias, Avda de la Vega 4-6, 33940, El Entrego, Spain
- Instituto de Investigación Sanitaria del Principado de Asturias, Av. Roma, s/n, 33011, Oviedo, Asturias, Spain
| |
Collapse
|
16
|
Composite Fiber Networks Based on Polycaprolactone and Bioactive Glass-Ceramics for Tissue Engineering Applications. Polymers (Basel) 2020; 12:polym12081806. [PMID: 32806530 PMCID: PMC7463601 DOI: 10.3390/polym12081806] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/11/2020] [Revised: 07/29/2020] [Accepted: 08/09/2020] [Indexed: 02/01/2023] Open
Abstract
In this work, composite fibers connected in three-dimensional porous scaffolds were fabricated by electrospinning, starting from polycaprolactone and inorganic powders synthesized by the sol-gel method. The aim was to obtain materials dedicated to the field of bone regeneration, with controllable properties of bioresorbability and bioactivity. The employed powders were nanometric and of a glass-ceramic type, a fact that constitutes the premise of a potential attachment to living tissue in the physiological environment. The morphological characterization performed on the composite materials validated both the fibrous character and oxide powder distribution within the polymer matrix. Regarding the biological evaluation, the period of immersion in simulated body fluid led to the initiation of polymer degradation and a slight mineralization of the embedded particles, while the osteoblast cells cultured in the presence of these scaffolds revealed a spatial distribution at different depths and a primary networking tendency, based on the composites’ geometrical and dimensional features.
Collapse
|
17
|
Mocquot C, Attik N, Pradelle-Plasse N, Grosgogeat B, Colon P. Bioactivity assessment of bioactive glasses for dental applications: A critical review. Dent Mater 2020; 36:1116-1143. [PMID: 32605848 DOI: 10.1016/j.dental.2020.03.020] [Citation(s) in RCA: 21] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/10/2020] [Revised: 03/19/2020] [Accepted: 03/19/2020] [Indexed: 12/12/2022]
Abstract
OBJECTIVE In the context of minimally invasive dentistry and tissue conservation, bioactive products are valuable. The aim of this review was to identify, clarify, and classify the methodologies used to quantify the bioactive glasses bioactivity. METHODS Specific search strategies were performed in electronic databases: PubMed, Embase, Cochrane Library, and Scopus. Papers were selected after a review of their title, abstract, and full text. The following data were then examined for final selection: BAG investigated, objectives, criteria, methods, and outcomes. RESULTS Sixty-one studies published from 2001 to 2019, were included. The bioactivity of BAG can be evaluated in vitro in contact with solutions, enamel, dentin, or cells. Other studies have conducted in vivo evaluation by BAG contact with dentin and dental pulp. Studies have used various analysis techniques: evaluation of apatite with or without characterization or assessment of mechanical properties. Reprecipitation mechanisms and pulp cell stimulation are treated together through the term 'bioactivity'. SIGNIFICANCE Based on these results, we suggested a classification of methodologies for a better understanding of the bioactive properties of BAG. According to all in vitro studies, BAG appear to be bioactive materials. No consensus has been reached on the results of in vivo studies, and no comparison has been conducted between protocols to assess the bioactivity of other bioactive competitor products.
Collapse
Affiliation(s)
- Caroline Mocquot
- Université de Lyon - Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, 69372 Lyon Cedex 08, France; Assistance Publique-Hôpitaux de Paris, Hôpital Rothschild, Service d'Odontologie, Université de Paris, Faculté dentaire, France.
| | - Nina Attik
- Université de Lyon - Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, 69372 Lyon Cedex 08, France; Université de Lyon, Université Claude Bernard Lyon 1, Faculté d'Odontologie, 69008 Lyon, France.
| | - Nelly Pradelle-Plasse
- Université de Lyon - Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, 69372 Lyon Cedex 08, France; Assistance Publique-Hôpitaux de Paris, Hôpital Rothschild, Service d'Odontologie, Université de Paris, Faculté dentaire, France
| | - Brigitte Grosgogeat
- Université de Lyon - Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, 69372 Lyon Cedex 08, France; Université de Lyon, Université Claude Bernard Lyon 1, Faculté d'Odontologie, 69008 Lyon, France; Hospices civils de Lyon, Service d'Odontologie, 69007 Lyon, France
| | - Pierre Colon
- Université de Lyon - Université Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, 69372 Lyon Cedex 08, France; Assistance Publique-Hôpitaux de Paris, Hôpital Rothschild, Service d'Odontologie, Université de Paris, Faculté dentaire, France
| |
Collapse
|
18
|
Parvizifard M, Karbasi S. Physical, mechanical and biological performance of PHB-Chitosan/MWCNTs nanocomposite coating deposited on bioglass based scaffold: Potential application in bone tissue engineering. Int J Biol Macromol 2020; 152:645-662. [DOI: 10.1016/j.ijbiomac.2020.02.266] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/16/2020] [Revised: 02/20/2020] [Accepted: 02/23/2020] [Indexed: 10/24/2022]
|
19
|
Durgalakshmi D, Rakkesh RA, Aruna P, Ganesan S, Balakumar S. Bioactivity and hemocompatibility of sol–gel bioactive glass synthesized under different catalytic conditions. NEW J CHEM 2020. [DOI: 10.1039/d0nj02445g] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/12/2023]
Abstract
In bioactive glass synthesis by sol–gel method, HCl catalyst induces biocompatible wollastonite crystallization and supports higher apatite formation.
Collapse
Affiliation(s)
- D. Durgalakshmi
- Department of Medical Physics, Anna University
- Chennai – 600 025
- India
| | - R. Ajay Rakkesh
- CAS in Crystallography and Biophysics, University of Madras
- Chennai – 600 025
- India
| | - P. Aruna
- Department of Medical Physics, Anna University
- Chennai – 600 025
- India
| | | | - S. Balakumar
- National Centre for Nanoscience and Nanotechnology, University of Madras
- Chennai – 600 025
- India
| |
Collapse
|
20
|
Rodrigues C, Naasani LIS, Zanatelli C, Paim TC, Azevedo JG, de Lima JC, da Cruz Fernandes M, Buchner S, Wink MR. Bioglass 45S5: Structural characterization of short range order and analysis of biocompatibility with adipose-derived mesenchymal stromal cells in vitro and in vivo. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2019; 103:109781. [DOI: 10.1016/j.msec.2019.109781] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/09/2018] [Revised: 05/12/2019] [Accepted: 05/20/2019] [Indexed: 12/11/2022]
|
21
|
Montinaro S, Luginina M, Garroni S, Orrù R, Delogu F, Bellucci D, Cannillo V, Cao G. Spark plasma sintered CaO-rich bioglass-derived glass-ceramics with different crystallinity ratios: A detailed investigation of their behaviour during biological tests in SBF. Ann Ital Chir 2019. [DOI: 10.1016/j.jeurceramsoc.2018.12.003] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
22
|
Rohr N, Nebe JB, Schmidli F, Müller P, Weber M, Fischer H, Fischer J. Influence of bioactive glass-coating of zirconia implant surfaces on human osteoblast behavior in vitro. Dent Mater 2019; 35:862-870. [PMID: 30890265 DOI: 10.1016/j.dental.2019.02.029] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/25/2018] [Revised: 02/14/2019] [Accepted: 02/27/2019] [Indexed: 11/15/2022]
Abstract
OBJECTIVE The recently developed bioactive glass PC-XG3, which is suitable to coat zirconia implant surfaces with high adhesion strength may reduce the time of osseointegration and the marginal bone loss following implantation. The glass composition has been previously evaluated for cytotoxicity on fibroblast cells, and will now be used to evaluate the cell behavior of osteoblast cells. METHODS Three different surface morphologies were created with PC-XG3 on zirconia discs. A clinically tested zirconia implant surface as well as polished and machined zirconia served as a reference. Cell viability after 24 h, cell spreading after 30 min and 24 h and the respective morphology of human osteoblasts using scanning electron microscopy were evaluated. Additionally, the corrosive process of PC-XG3 in cell culture medium up to 7 d was measured. RESULTS Initial cell behavior of human osteoblasts was not accelerated by the PC-XG3 surface when compared to zirconia. Additionally, it was found that a decreased surface roughness promoted initial cell spreading. Storage in cell culture medium resulted in the accumulation of C and N on the bioglass surface while Mg, Si, K and Ca were decreased and crack formation was observed. SIGNIFICANCE Since initial spreading quality to a biomaterial is a crucial factor that will determine the subsequent cell function, proliferation, differentiation, and viability it can be assumed that a coating of zirconia implants with this bioactive glass will unlikely reduce osseointegration time.
Collapse
Affiliation(s)
- Nadja Rohr
- Division of Dental Materials and Engineering, Department of Reconstructive Dentistry, University Center for Dental Medicine, University of Basel, Basel, Switzerland; Department of Cell Biology, University Medical Center Rostock, Rostock, Germany.
| | - J Barbara Nebe
- Department of Cell Biology, University Medical Center Rostock, Rostock, Germany
| | - Fredy Schmidli
- Division of Dental Materials and Engineering, Department of Reconstructive Dentistry, University Center for Dental Medicine, University of Basel, Basel, Switzerland
| | - Petra Müller
- Department of Cell Biology, University Medical Center Rostock, Rostock, Germany
| | - Michael Weber
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
| | - Horst Fischer
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
| | - Jens Fischer
- Division of Dental Materials and Engineering, Department of Reconstructive Dentistry, University Center for Dental Medicine, University of Basel, Basel, Switzerland
| |
Collapse
|
23
|
Meng Y, Qiang W, Pang J. Fabrication and Microstructure of Laminated HAP⁻45S5 Bioglass Ceramics by Spark Plasma Sintering. MATERIALS 2019; 12:ma12030484. [PMID: 30720770 PMCID: PMC6384796 DOI: 10.3390/ma12030484] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/06/2019] [Revised: 02/02/2019] [Accepted: 02/03/2019] [Indexed: 01/09/2023]
Abstract
Hydroxyapatite (HAP) has excellent biocompatibility with living bone tissue and does not cause defensive body reactions, therefore, it has become one of the most widely used calcium phosphate materials in dental and medical fields. However, its poor mechanical properties have been a substantial challenge in the application of HAP for the replacement of load-bearing or large bone defects. Laminated HAP–45S5 bioglass ceramics composites were prepared by the spark plasma sintering (SPS) technique. The interface structures between the HAP and 45S5 bioglass layers and the mechanical properties of the laminated composites were investigated. It was demonstrated that there was mutual transfer and exchange of Ca and Na atoms at the interface between 45S5 bioglass/HAP laminated layers, which contributed considerably to the interfacial bonding. Due from the laminated structure and strong interface bonding, laminated HAP–45S5 bioglass is recommended for structural applications.
Collapse
Affiliation(s)
- Ye Meng
- School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China.
- National Demonstration Center for Experimental Materials Education, University of Science and Technology Beijing, Beijing 100083, China.
| | - Wenjiang Qiang
- School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China.
| | - Jingqin Pang
- School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China.
- National Demonstration Center for Experimental Materials Education, University of Science and Technology Beijing, Beijing 100083, China.
| |
Collapse
|
24
|
Midha S, Kumar S, Sharma A, Kaur K, Shi X, Naruphontjirakul P, Jones JR, Ghosh S. Silk fibroin-bioactive glass based advanced biomaterials: towards patient-specific bone grafts. Biomed Mater 2018; 13:055012. [DOI: 10.1088/1748-605x/aad2a9] [Citation(s) in RCA: 32] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
25
|
Sauro S, Watson T, Moscardó AP, Luzi A, Feitosa VP, Banerjee A. The effect of dentine pre-treatment using bioglass and/or polyacrylic acid on the interfacial characteristics of resin-modified glass ionomer cements. J Dent 2018; 73:32-39. [PMID: 29609016 DOI: 10.1016/j.jdent.2018.03.014] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2018] [Revised: 03/25/2018] [Accepted: 03/29/2018] [Indexed: 11/24/2022] Open
Abstract
OBJECTIVE To evaluate the effect of load-cycle aging and/or 6 months artificial saliva (AS) storage on bond durability and interfacial ultramorphology of resin-modified glass ionomer cement (RMGIC) applied onto dentine air-abraded using Bioglass 45S5 (BAG) with/without polyacrylic acid (PAA) conditioning. METHODS RMGIC (Ionolux, VOCO) was applied onto human dentine specimens prepared with silicon-carbide abrasive paper or air-abraded with BAG with or without the use of PAA conditioning. Half of bonded-teeth were submitted to load cycling (150,000 cycles) and half immersed in deionised water for 24 h. They were cut into matchsticks and submitted immediately to microtensile bond strength (μTBS) testing or 6 months in AS immersion and subsequently μTBS tested. Results were analysed statistically by two-way ANOVA and Student-Newman-Keuls test (α = 0.05). Fractographic analysis was performed using FE-SEM, while further RMGIC-bonded specimens were surveyed for interfacial ultramorphology characterisation (dye-assisted nanoleakage) using confocal microscopy. RESULTS RMGIC applied onto dentine air-abraded with BAG regardless PAA showed no significant μTBS reduction after 6 months of AS storage and/or load cycling (p > 0.05). RMGIC-dentine interface showed no sign of degradation/nanoleakage after both aging regimens. Conversely, interfaces created in PAA-conditioned SiC-abraded specimens showed significant reduction in μTBS (p < 0.05) after 6 months of storage and/or load cycling with evident porosities within bonding interface. CONCLUSIONS Dentine pre-treatment using BAG air-abrasion might be a suitable strategy to enhance the bonding performance and durability of RMGIC applied to dentine. The use of PAA conditioner in smear layer-covered dentine may increase the risk of degradation at the bonding interface. CLINICAL SIGNIFICANCE A combined dentine pre-treatment using bioglass followed by PAA may increase the bond strength and maintain it stable over time. Conversely, the use of PAA conditioning alone may offer no significant contribute to the immediate and prolonged bonding performance.
Collapse
Affiliation(s)
- Salvatore Sauro
- Dental Biomaterials, Preventive & Minimally Invasive Dentistry, Departamento de Odontologia, CEU Carndenal Herrera University, Valencia, Spain; Tissue Engineering and Biophotonics Research Division, King's College London Dental Institute, King's College London, United Kingdom.
| | - Timothy Watson
- Tissue Engineering and Biophotonics Research Division, King's College London Dental Institute, King's College London, United Kingdom
| | | | - Arlinda Luzi
- Dental Biomaterials, Preventive & Minimally Invasive Dentistry, Departamento de Odontologia, CEU Carndenal Herrera University, Valencia, Spain
| | | | - Avijit Banerjee
- Tissue Engineering and Biophotonics Research Division, King's College London Dental Institute, King's College London, United Kingdom; Department of Conservative & MI Dentistry, King's College London Dental Institute, King's College London, United Kingdom
| |
Collapse
|
26
|
Höner M, Lauria I, Dabhi C, Kant S, Leube RE, Fischer H. Periodic microstructures on bioactive glass surfaces enhance osteogenic differentiation of human mesenchymal stromal cells and promote osteoclastogenesis in vitro. J Biomed Mater Res A 2018; 106:1965-1978. [PMID: 29569421 DOI: 10.1002/jbm.a.36399] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/11/2017] [Revised: 02/19/2018] [Accepted: 03/15/2018] [Indexed: 11/06/2022]
Abstract
Bioactive glasses (BG) are known for their ability to bond to hard and soft tissues. We hypothesized that the stimulation of bone remodeling, including cellular bone forming and bone resorbing processes, can be increased by applying periodic microstructures on the glass surfaces in vitro. To test our hypothesis, two different BG (45S5 and 13-93) were microstructured in a groove-and-ridge pattern of different sizes by a novel casting process and tested in cell culture experiments using human mesenchymal stromal cells (hMSCs) and RAW 264.7 cells. The microstructures induced contact guidance of hMSCs and increased osteogenic marker gene expression of the stem cells, compared to non-structured glass surfaces as verified by ELISA and quantitative real-time PCR (qPCR) analyses. Furthermore, the structures stimulated the differentiation of RAW cells to osteoclast-like cells confirmed by TRAP gene expression and their resorption activity causing visible resorption lacunae. Our results demonstrate that periodically microstructured BG (especially 45S5) might improve the osteogenic differentiation of hMSCs and influence the activity of material resorbing cells in vitro. Hence, microstructuring of BG could enhance the remodeling process of bone substitutes critical for the formation of new bone tissue in vivo and thus be used to trigger bone remodeling kinetics in vivo. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1965-1978, 2018.
Collapse
Affiliation(s)
- Miriam Höner
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Pauwelsstraße 30, Aachen, 52074, Germany
| | - Ines Lauria
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Pauwelsstraße 30, Aachen, 52074, Germany
| | - Christina Dabhi
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Pauwelsstraße 30, Aachen, 52074, Germany
| | - Sebastian Kant
- Institute of Molecular and Cellular Anatomy, RWTH Aachen University, Wendlingweg 2, Aachen, 52074, Germany
| | - Rudolf E Leube
- Institute of Molecular and Cellular Anatomy, RWTH Aachen University, Wendlingweg 2, Aachen, 52074, Germany
| | - Horst Fischer
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Pauwelsstraße 30, Aachen, 52074, Germany
| |
Collapse
|
27
|
Influences of surface treatments with abrasive paper and sand-blasting on surface morphology, hydrophilicity, mineralization and osteoblasts behaviors of n-CS/PK composite. Sci Rep 2017; 7:568. [PMID: 28373673 PMCID: PMC5428562 DOI: 10.1038/s41598-017-00571-4] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/01/2016] [Accepted: 02/23/2017] [Indexed: 01/21/2023] Open
Abstract
The surfaces of nano-calcium silicate (n-CS)/polyetheretherketone (PK) composites were treated with abrasive paper and sand-blasting, and the surfaces performances of the as-treated composites were studied. The results showed that the surface roughness, hydrophilicity and mineralization of the simulated body fluid (SBF) of the composites surfaces were significantly improved, and the properties of the composites treated by with sand-blasting were better than those treated with abrasive paper. Moreover, the treated composites significantly promoted osteoblasts responses, such as cell attachment, spreading, proliferation and alkaline phosphatase (ALP) activity, compared to un-treated composites, and the cellular responses to the composites treated with sand-blasting were better than those treated with abrasive paper. The results suggested that surface treatment with sand-blasting was an effective method to greatly improve the surface bioperformances of the n-CS/PK composite, and this treated composite with improved bioactivity and cytocompatibility might be a promising implant material for orthopedic applications.
Collapse
|
28
|
Martínez C, Fernández C, Prado M, Ozols A, Olmedo DG. Synthesis and characterization of a novel scaffold for bone tissue engineering based on Wharton's jelly. J Biomed Mater Res A 2017; 105:1034-1045. [DOI: 10.1002/jbm.a.35976] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2016] [Revised: 11/10/2016] [Accepted: 12/06/2016] [Indexed: 11/08/2022]
Affiliation(s)
- Cristian Martínez
- Department of Oral Pathology, Group of Biomaterials for Prostheses, Institute of Biomedical Engineering, Engineering School, Buenos Aires University; Av. Paseo Colón 850 (C1063ACV) Argentina
- Laboratory for the Study of Biomaterials, Department of Oral Pathology, School of Dentistry; University of Buenos Aires; MT de Alvear 2142, 2° “A”, (C1122AAH) Argentina
- Biomaterials Group, School of Dentistry; National University of Cuyo; Mendoza, General San Martin Park (M5502JMA) Argentina
| | - Carlos Fernández
- Department of Oral Pathology, Group of Biomaterials for Prostheses, Institute of Biomedical Engineering, Engineering School, Buenos Aires University; Av. Paseo Colón 850 (C1063ACV) Argentina
| | - Miguel Prado
- Nuclear Materials Group, Bariloche Atomic Center (GMN-CAB), National Atomic Energy Commission; Av. E. Bustillo 9500, San Carlos de Bariloche, (R8402AGP) Argentina
| | - Andres Ozols
- Department of Oral Pathology, Group of Biomaterials for Prostheses, Institute of Biomedical Engineering, Engineering School, Buenos Aires University; Av. Paseo Colón 850 (C1063ACV) Argentina
| | - Daniel G. Olmedo
- Laboratory for the Study of Biomaterials, Department of Oral Pathology, School of Dentistry; University of Buenos Aires; MT de Alvear 2142, 2° “A”, (C1122AAH) Argentina
- National Research Council (CONICET); Buenos Aires (C1122AAH) Argentina
| |
Collapse
|
29
|
Höner M, Böke F, Weber M, Fischer H. Mimicking physiological flow conditions to study alterations of bioactive glass surfaces in vitro. J Biomed Mater Res B Appl Biomater 2017; 106:228-236. [PMID: 28130877 DOI: 10.1002/jbm.b.33847] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/04/2016] [Revised: 12/06/2016] [Accepted: 12/24/2016] [Indexed: 11/11/2022]
Abstract
Bioactive glasses form a strong bond with surrounding tissue and slowly degrade when implanted in vivo, stimulating the host bone to regenerate itself. We investigated the behaviour of microstructured bioactive glass surfaces (13-93) in an SBF reactor, which mimics physiological flow conditions. The structures were developed to potentially influence cell-biological long term processes such as osteogenic differentiation. It is therefore important that the structures withstand a certain time in SBF or body fluids. The experiments revealed that these structures were preserved up to 30 days. Although macroscopically stable, mass loss under flowing conditions was 2-2.5%, in contrast to <1% under static conditions. Polished samples in flowing medium lost 2.7% up to day 7 and then regained mass, resulting in overall 0.5% mass loss after 30 days. Thicker calcium phosphate rich layers for the samples in flowing medium were detected, demonstrating better bone bonding capacity than predicted conventionally. The hydroxyapatite conversion in the reactor was comparable to published in vivo data. We conclude that surface alterations that occur in vivo can be better mimicked by using the proposed flow bioreactor than by the established SBF method in static medium. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 228-236, 2018.
Collapse
Affiliation(s)
- Miriam Höner
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, 52074, Aachen, Germany
| | - Frederik Böke
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, 52074, Aachen, Germany
| | - Michael Weber
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, 52074, Aachen, Germany
| | - Horst Fischer
- Department of Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, 52074, Aachen, Germany
| |
Collapse
|
30
|
Popa AC, Stan GE, Husanu MA, Mercioniu I, Santos LF, Fernandes HR, Ferreira JMF. Bioglass implant-coating interactions in synthetic physiological fluids with varying degrees of biomimicry. Int J Nanomedicine 2017; 12:683-707. [PMID: 28176941 PMCID: PMC5268334 DOI: 10.2147/ijn.s123236] [Citation(s) in RCA: 37] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022] Open
Abstract
Synthetic physiological fluids are currently used as a first in vitro bioactivity assessment for bone grafts. Our understanding about the interactions taking place at the fluid-implant interface has evolved remarkably during the last decade, and does not comply with the traditional International Organization for Standardization/final draft International Standard 23317 protocol in purely inorganic simulated body fluid. The advances in our knowledge point to the need of a true paradigm shift toward testing physiological fluids with enhanced biomimicry and a better understanding of the materials' structure-dissolution behavior. This will contribute to "upgrade" our vision of entire cascades of events taking place at the implant surfaces upon immersion in the testing media or after implantation. Starting from an osteoinductive bioglass composition with the ability to alleviate the oxidative stress, thin bioglass films with different degrees of polymerization were deposited onto titanium substrates. Their biomineralization activity in simulated body fluid and in a series of new inorganic-organic media with increasing biomimicry that more closely simulated the human intercellular environment was compared. A comprehensive range of advanced characterization tools (scanning electron microscopy; grazing-incidence X-ray diffraction; Fourier-transform infrared, micro-Raman, energy-dispersive, X-ray photoelectron, and surface-enhanced laser desorption/ionization time-of-flight mass spectroscopies; and cytocompatibility assays using mesenchymal stem cells) were used. The information gathered is very useful to biologists, biophysicists, clinicians, and material scientists with special interest in teaching and research. By combining all the analyses, we propose herein a step forward toward establishing an improved unified protocol for testing the bioactivity of implant materials.
Collapse
Affiliation(s)
- AC Popa
- National Institute of Materials Physics, Măgurele
- Army Centre for Medical Research, Bucharest, Romania
| | - GE Stan
- National Institute of Materials Physics, Măgurele
| | - MA Husanu
- National Institute of Materials Physics, Măgurele
| | - I Mercioniu
- National Institute of Materials Physics, Măgurele
| | - LF Santos
- Centro de Química Estrutural, Instituto Superior Técnico (CQE-IST), University of Lisbon, Lisbon
| | - HR Fernandes
- Department of Materials and Ceramics Engineering, Centre for Research in Ceramics and Composite Materials (CICECO), University of Aveiro, Aveiro, Portugal
| | - JMF Ferreira
- Department of Materials and Ceramics Engineering, Centre for Research in Ceramics and Composite Materials (CICECO), University of Aveiro, Aveiro, Portugal
| |
Collapse
|
31
|
Effect of Ti +4 on in vitro bioactivity and antibacterial activity of silicate glass-ceramics. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2016; 69:1058-67. [DOI: 10.1016/j.msec.2016.08.022] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/19/2016] [Revised: 07/27/2016] [Accepted: 08/07/2016] [Indexed: 11/19/2022]
|
32
|
Li Z, Thompson BC, Hu H, Khor KA. Rapid fabrication of dense 45S5 Bioglass
®
compacts through spark plasma sintering and evaluation of their
in vitro
biological properties. Biomed Mater 2016; 11:065006. [DOI: 10.1088/1748-6041/11/6/065006] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
33
|
Shuai C, Cao Y, Dan G, Gao C, Feng P, Wu P. Improvement in degradability of 58s glass scaffolds by ZnO and β-TCP modification. Bioengineered 2016; 7:342-351. [PMID: 27710432 DOI: 10.1080/21655979.2016.1197032] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/21/2022] Open
Abstract
58s bioactive glass shows great potential for bone defects repair. However, at early repairing stage, the degradation rate of 58s glass is too fast due to the fast ion-exchange. At later repairing stage, the degradation rate of 58s glass is too slow due to the high dense mineral layer. In this work, Zinc oxide (ZnO) and β-tricalcium phosphate (β-TCP) were introduced into 58s glass bone scaffolds to improve the degradability. The results showed that ZnO could decrease the degradation rate and promote the stability of 58s glass at early repairing stage. Moreover, the presence of β-TCP appeared to increase the degradation rate at a later stage of repairing. Furthermore, in vitro biocompatibility study, carried out using human osteoblast-like cells (MG63), demonstrated that ZnO and β-TCP enhanced cell attachment and proliferation. The study provided a reference for further research in bone tissue engineering.
Collapse
Affiliation(s)
- Cijun Shuai
- a State Key Laboratory of High Performance Complex Manufacturing, Central South University , Changsha , P.R. China.,c Shenzhen Research Institute, Central South University , Shenzhen , P.R. China
| | - Yiyuan Cao
- a State Key Laboratory of High Performance Complex Manufacturing, Central South University , Changsha , P.R. China
| | - Gao Dan
- d School of Basic Medical Science, Central South University , Changsha , P.R. China
| | - Chengde Gao
- a State Key Laboratory of High Performance Complex Manufacturing, Central South University , Changsha , P.R. China
| | - Pei Feng
- a State Key Laboratory of High Performance Complex Manufacturing, Central South University , Changsha , P.R. China
| | - Ping Wu
- b College of Chemistry, Xiangtan University , Xiangtan , P.R. China
| |
Collapse
|
34
|
LEE JH, SEO SJ, KIM HW. Bioactive glass-based nanocomposites for personalized dental tissue regeneration. Dent Mater J 2016; 35:710-720. [DOI: 10.4012/dmj.2015-428] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Affiliation(s)
- Jung-Hwan LEE
- Institute of Tissue Regeneration Engineering (ITREN), Dankook University
| | - Seog-Jin SEO
- Institute of Tissue Regeneration Engineering (ITREN), Dankook University
- Department of Nanobiomedical Science, Dankook University
| | - Hae-Won KIM
- Institute of Tissue Regeneration Engineering (ITREN), Dankook University
- Department of Nanobiomedical Science, Dankook University
- BK21 PLUS NBM Global Research Center for Regenerative Medicine, Dankook University
- Department of Biomaterials Science, College of Dentistry, Dankook University
| |
Collapse
|
35
|
Liu J, Shirosaki Y, Miyazaki T. Bioactive polymethylmethacrylate bone cement modified with combinations of phosphate group-containing monomers and calcium acetate. J Biomater Appl 2015; 29:1296-303. [PMID: 25568169 DOI: 10.1177/0885328214562436] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Bone cement from polymethylmethacrylate powder and methylmethacrylate liquid has been successfully demonstrated as artificial material to anchor joint replacements in bone. However, it lacks the capability to bond directly to bone, so long-term implantation leads to an increased risk of loosening. Bioactive materials show better performance in fixation to bone, and the chemical bonding depends on bone-like apatite formation. This is triggered by surface reactions with body fluid. For these reactions, superficial functional groups like silanol (Si-OH) are ideal sites to induce apatite nucleation and the release of Ca(2+) ions accelerates the apatite growth. Therefore, incorporation of materials containing these key components may provide the cement with apatite-forming ability. In this study, phosphoric acid 2-hydroxyethyl methacrylate ester or bis[2-(methacryloyloxy)ethyl] phosphate supplying a phosphate group (PO4H2) was added into methylmethacrylate liquid, while calcium acetate as a source of Ca(2+) ions was mixed into polymethylmethacrylate powder. The influences of the combinations on the setting time and compressive strength were also investigated. Apatite was formed on the cements modified with 30 mass% of phosphoric acid 2-hydroxyethyl methacrylate ester or bis[2-(methacryloyloxy)ethyl] phosphate. The induction period was shortened with increased amounts of Ca(CH3COO)2. The setting time could be controlled by the Ca(CH3COO)2/monomer mass ratio. Faster setting was achieved at a ratio close to the mixing ratio of the powder/liquid (2:1), and both increases and decreases in the amount of Ca(CH3COO)2 prolonged the setting time based on this ratio. The highest compressive strength was 88.8 ± 2.6 MPa, higher than the lowest limit of ISO 5833 but was lower than that of the simulated body fluid-soaked reference. The increase of additives caused the decline in compressive strength. In view of balancing apatite formation and clinical standard, bis[2-(methacryloyloxy)ethyl] phosphate is more suitable as an additive, and the optimal modification is a combination of 30 mass% of bis[2-(methacryloyloxy)ethyl] phosphate and 20 mass% of Ca(CH3COO)2.
Collapse
Affiliation(s)
- Jinkun Liu
- Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, Kitakyushu, Japan
| | - Yuki Shirosaki
- Frontier Research Academy for Young Researchers, Kyushu Institute of Technology, Kitakyushu, Japan
| | - Toshiki Miyazaki
- Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology, Kitakyushu, Japan
| |
Collapse
|
36
|
Kirsten A, Hausmann A, Weber M, Fischer J, Fischer H. Bioactive and thermally compatible glass coating on zirconia dental implants. J Dent Res 2014; 94:297-303. [PMID: 25421839 DOI: 10.1177/0022034514559250] [Citation(s) in RCA: 32] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022] Open
Abstract
The healing time of zirconia implants may be reduced by the use of bioactive glass coatings. Unfortunately, existing glasses are either bioactive like Bioglass 45S5 but thermally incompatible with the zirconia substrate, or they are thermally compatible but exhibit only a very low level of bioactivity. In this study, we hypothesized that a tailored substitution of alkaline earth metals and alkaline metals in 45S5 can lead to a glass composition that is both bioactive and thermally compatible with zirconia implants. A novel glass composition was analyzed using x-ray fluorescence spectroscopy, dilatometry, differential scanning calorimetry, and heating microscopy to investigate its chemical, physical, and thermal properties. Bioactivity was tested in vitro using simulated body fluid (SBF). Smooth and microstructured glass coatings were applied using a tailored spray technique with subsequent thermal treatment. Coating adhesion was tested on implants that were inserted in bovine ribs. The cytocompatibility of the coating was analyzed using L929 mouse fibroblasts. The coefficient of thermal expansion of the novel glass was shown to be slightly lower (11.58 · 10(-6) K(-1)) than that of the zirconia (11.67 · 10(-6) K(-1)). After storage in SBF, the glass showed reaction layers almost identical to the bioactive glass gold standard, 45S5. A process window between 800 °C and 910 °C was found to result in densely sintered and amorphous coatings. Microstructured glass coatings on zirconia implants survived a minimum insertion torque of 60 Ncm in the in vitro experiment on bovine ribs. Proliferation and cytotoxicity of the glass coatings was comparable with the controls. The novel glass composition showed a strong adhesion to the zirconia substrate and a significant bioactive behavior in the SBF in vitro experiments. Therefore, it holds great potential to significantly reduce the healing time of zirconia dental implants.
Collapse
Affiliation(s)
- A Kirsten
- Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
| | - A Hausmann
- Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
| | - M Weber
- Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
| | - J Fischer
- Institute of Dental Materials and Engineering, University Hospital of Dental Medicine, University of Basel, Basel, Switzerland
| | - H Fischer
- Dental Materials and Biomaterials Research, RWTH Aachen University Hospital, Aachen, Germany
| |
Collapse
|
37
|
Feng P, Deng Y, Duan S, Gao C, Shuai C, Peng S. Liquid phase sintered ceramic bone scaffolds by combined laser and furnace. Int J Mol Sci 2014; 15:14574-90. [PMID: 25196598 PMCID: PMC4159869 DOI: 10.3390/ijms150814574] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2014] [Revised: 07/29/2014] [Accepted: 08/14/2014] [Indexed: 11/25/2022] Open
Abstract
Fabrication of mechanically competent bioactive scaffolds is a great challenge in bone tissue engineering. In this paper, β-tricalcium phosphate (β-TCP) scaffolds were successfully fabricated by selective laser sintering combined with furnace sintering. Bioglass 45S5 was introduced in the process as liquid phase in order to improve the mechanical and biological properties. The results showed that sintering of β-TCP with the bioglass revealed some features of liquid phase sintering. The optimum amount of 45S5 was 5 wt %. At this point, the scaffolds were densified without defects. The fracture toughness, compressive strength and stiffness were 1.67 MPam1/2, 21.32 MPa and 264.32 MPa, respectively. Bone like apatite layer was formed and the stimulation for apatite formation was increased with increase in 45S5 content after soaking in simulated body fluid, which indicated that 45S5 could improve the bioactivity. Furthermore, MG-63 cells adhered and spread well, and proliferated with increase in the culture time.
Collapse
Affiliation(s)
- Pei Feng
- State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China.
| | - Youwen Deng
- Department of Spine Surgery, the Second Xiangya Hospital of Central South University, Changsha 410011, China.
| | - Songlin Duan
- State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China.
| | - Chengde Gao
- State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China.
| | - Cijun Shuai
- State Key Laboratory of High Performance Complex Manufacturing, Central South University, Changsha 410083, China.
| | - Shuping Peng
- Cancer Research Institute, Central South University, Changsha 410078, China.
| |
Collapse
|