Hexavalent chromium stress response, reduction capability and bioremediation potential of Trichoderma sp. isolated from electroplating wastewater

"Efficient novel fungal-enriched biochar formulation for hexavalent chromium bioremediation"

Chromium (Cr), a key element in industrial processes such as leather tanning, poses severe environmental hazards, particularly its hexavalent form, Cr(VI), which is highly toxic and prevalent in tannery effluents/sludge. The persistence and toxicity of Cr(VI) necessitate the development of effective remediation strategies to mitigate its environmental impact. This study investigated the potential of Trichoderma yunnanense (NBRICRF_97) and its combination with 0.5% sugarcane bagasse biochar (SBC) for the reduction of Cr(VI). The results demonstrated that T. yunnanense alone achieved a 91.04% reduction of 50 mg L-1 Cr(VI) within 72 h. Combined with 0.5% SBC, the reduction efficiency increased to 99.65% within 48 h. However, the efficiency decreased at higher concentrations (200 mg L-1). The combination also improved fungal growth and increased extracellular ChrR enzyme activity (13.07 U mg-1 protein compared to the control). Total glutathione activity was boosted by 161.07% at 100 mg L-1 Cr(VI). Antioxidant enzymes (SOD, POD, CAT) and proline mitigated oxidative stress and FTIR analysis revealed changes in fungal cell wall functional groups (-OH and -NH) upon Cr(VI) exposure. SEM-EDX confirmed chromium deposition on fungal surfaces. These results underscore the Cr(VI) detoxification capabilities of T. yunnanense and the synergistic benefits of SBC, suggesting a promising bioremediation strategy for Cr(VI)-contaminated environments. The integration of T. yunnanense with SBC offers a sustainable and cost-effective approach for the bioremediation of Cr(VI)-contaminated sites, with potential for implementation in large-scale environmental cleanup efforts.

Revisiting biochemical pathways for lead and cadmium tolerance by domain bacteria, eukarya, and their joint action in bioremediation

With the advent rise is in urbanization and industrialization, heavy metals (HMs) such as lead (Pb) and cadmium (Cd) contamination have increased considerably. It is among the most recalcitrant pollutants majorly affecting the biotic and abiotic components of the ecosystem like human well-being, animals, soil health, crop productivity, and diversity of prokaryotes (bacteria) and eukaryotes (plants, fungi, and algae). At higher concentrations, these metals are toxic for their growth and pose a significant environmental threat, necessitating innovative and sustainable remediation strategies. Bacteria exhibit diverse mechanisms to cope with HM exposure, including biosorption, chelation, and efflux mechanism, while fungi contribute through mycorrhizal associations and hyphal networks. Algae, especially microalgae, demonstrate effective biosorption and bioaccumulation capacities. Plants, as phytoremediators, hyperaccumulate metals, providing a nature-based approach for soil reclamation. Integration of these biological agents in combination presents opportunities for enhanced remediation efficiency. This comprehensive review aims to provide insights into joint action of prokaryotic and eukaryotic interactions in the management of HM stress in the environment.

A kinetic modelling approach to explore mechanism of Cr(VI) detoxification by a novel strain Pseudochrobactrum saccharolyticum NBRI-CRB 13 using response surface methodology

A novel Pseudochrobactrum saccharolyticum strain NBRI-CRB 13, isolated from tannery sludge, was studied to grow up to 500 mgL-1 of Cr(VI) and showed Cr(VI) detoxification by reducing > 90% of Cr(VI) at different concentrations 25, 50 and 100 mgL-1. Kinetic studies showed that first-order models were fitted (R2 = 0.998) to the time-dependent Cr(VI) reduction with degradation rate constant (k) (1.03-0.429 h-1). Cr(VI) detoxification was primarily related to the extracellular fraction of microbial cells, which showed a maximum extracellular reductase enzyme activity led to 94.6% reduction of Cr(VI). Moreover, the strain showed maximum extracellular polymeric substances (EPS) production at 100 mgL-1 Cr(VI), which is presumably the reason for Cr(VI) removal as EPS serves as the metal binding site for Cr(VI) ions. Further, an optimization study using Box-Behnken design was conducted considering parameters viz., pH, temperature, and initial concentration of Cr(VI). The maximum percent reduction of Cr(VI) was obtained at pH 6.5, temperature 30 °C with 62.5 mgL-1Cr(VI) concentration. Further, the Cr(VI) reduction and adsorption ability of strain P. saccharolyticum NBRI-CRB13 were confirmed by SEM-EDS, FTIR, and XRD analyses. FTIR analysis confirmed the presence of functional groups (-OH, -COOH, -PO4) on bacterial cell walls, which were more likely to interact with positively charged chromium ions. The study elucidated the reduction of Cr(VI) by the novel bacterium within 24 h using the response surface methodology approach and advocated its application in real-time situations.

Microbial Removal of Heavy Metals from Contaminated Environments Using Metal-Resistant Indigenous Strains

Contamination of soil with heavy metals has become a matter of global importance due to its impact on agriculture, environmental integrity, and therefore human health and safety. Several microbial strains isolated from soil contaminated by long-term chemical and petrochemical activities were found to manifest various levels of tolerance to Cr, Pb, and Zn, out of which Bacillus marisflavi and Trichoderma longibrachiatum exhibited above-moderate tolerance. The concentrations of target heavy metals before and after bioremediation were determined using electrochemical screen-printed electrodes (SPE) modified with different nanomaterials. The morpho-structural SEM/EDX analyses confirmed the presence of metal ions on the surface of the cell, with metal uptake being mediated by biosorption with hydroxyl, carboxyl, and amino groups as per FTIR observations. T. longibrachiatum was observed to pose a higher bioremediation potential compared to B. marisflavi, removing 87% of Cr and 67% of Zn, respectively. Conversely, B. marisflavi removed 86% of Pb from the solution, compared to 48% by T. longibrachiatum. Therefore, the fungal strain T. longibrachiatum could represent a viable option for Cr and Zn bioremediation strategies, whereas the bacterial strain B. marisflavi may be used in Pb bioremediation applications.

A review on simultaneous heavy metal removal and organo-contaminants degradation by potential microbes: Current findings and future outlook

Industrial processes result in the production of heavy metals, dyes, pesticides, polyaromatic hydrocarbons (PAHs), pharmaceuticals, micropollutants, and PFAS (per- and polyfluorinated substances). Heavy metals are currently a significant problem in drinking water and other natural water bodies, including soil, which has an adverse impact on the environment as a whole. The heavy metal is highly poisonous, carcinogenic, mutagenic, and teratogenic to humans as well as other animals. Multiple polluted sites, including terrestrial and aquatic ecosystems, have been observed to co-occur with heavy metals and organo-pollutants. Pesticides and heavy metals can be degraded and removed concurrently from various metals and pesticide-contaminated matrixes due to microbial processes that include a variety of bacteria, both aerobic and anaerobic, as well as fungi. Numerous studies have examined the removal of heavy metals and organic-pollutants from different types of systems, but none of them have addressed the removal of these co-occurring heavy metals and organic pollutants and the use of microbes to do so. Therefore, the main focus of this review is on the recent developments in the concurrent microbial degradation of organo-pollutants and heavy metal removal. The limitations related to the simultaneous removal and degradation of heavy metals and organo-pollutant pollutants have also been taken into account.

Treatment of amoxicillin-containing wastewater by Trichoderma strains selected from activated sludge

This study screened a Trichoderma strain (Trichoderma pubescens DAOM 166162) from activated sludge to solve the limitation of traditional biological processes in the treatment of amoxicillin (AMO) containing wastewater. The mechanism of the removal of AMO wastewater by T. pubescens DAOM 166162 (TPC) was studied. AMO resulted in a higher protein percentage in the extracellular polymeric substances (EPS) secreted by TPC, which facilitated the removal of AMO from the wastewater. Fourier transform infrared spectroscopy and excitation-emission matrix were used to characterize EPS produced by metabolizing different carbon sources. It was found that the hydroxyl group was the primary functional group in EPS. The life activity of TPC was the cause of the pH rise. The main pathway of degradation of AMO by TPC was the hydroxyl group uncoupling the lactam ring and the hydrolysis of AMO in an alkaline environment. The removal efficiency of AMO in wastewater by TPC was >98 % (24 h), of which the biodegradation efficiency was 70.01 ± 1.48 %, and the biosorption efficiency was 28.44 ± 2.97 %. In general, TPC is an effective strain for treating wastewater containing AMO. This research provides a new idea for AMO wastewater treatment.

Chromium Toxicity in Plants: Signaling, Mitigation, and Future Perspectives

Plants are very often confronted by different heavy metal (HM) stressors that adversely impair their growth and productivity. Among HMs, chromium (Cr) is one of the most prevalent toxic trace metals found in agricultural soils because of anthropogenic activities, lack of efficient treatment, and unregulated disposal. It has a huge detrimental impact on the physiological, biochemical, and molecular traits of crops, in addition to being carcinogenic to humans. In soil, Cr exists in different forms, including Cr (III) "trivalent" and Cr (VI) "hexavalent", but the most pervasive and severely hazardous form to the biota is Cr (VI). Despite extensive research on the effects of Cr stress, the exact molecular mechanisms of Cr sensing, uptake, translocation, phytotoxicity, transcript processing, translation, post-translational protein modifications, as well as plant defensive responses are still largely unknown. Even though plants lack a Cr transporter system, it is efficiently accumulated and transported by other essential ion transporters, hence posing a serious challenge to the development of Cr-tolerant cultivars. In this review, we discuss Cr toxicity in plants, signaling perception, and transduction. Further, we highlight various mitigation processes for Cr toxicity in plants, such as microbial, chemical, and nano-based priming. We also discuss the biotechnological advancements in mitigating Cr toxicity in plants using plant and microbiome engineering approaches. Additionally, we also highlight the role of molecular breeding in mitigating Cr toxicity in sustainable agriculture. Finally, some conclusions are drawn along with potential directions for future research in order to better comprehend Cr signaling pathways and its mitigation in sustainable agriculture.

Screening of Native Trichoderma Species for Nickel and Copper Bioremediation Potential Determined by FTIR and XRF

Soil pollution with heavy metals is a serious threat to the environment. However, soils polluted with heavy metals are considered good sources of native metal-resistant Trichoderma strains. Trichoderma spp. are free-living fungi commonly isolated from different ecosystems, establishing endophytic associations with plants. They have important ecological and biotechnological roles due to their production of a wide range of secondary metabolites, thus regulating plant growth and development or inducing resistance to plant pathogens. In this work we used indigenous Trichoderma strains that were previously isolated from different soil types to determine their tolerance to increased copper and nickel concentrations as well as mechanisms of metal removal. The concentrations of bioavailable metal concentrations were determined after extraction with diethylene-triamine pentaacetate (DTPA)-extractable metals (Cd, Cr, Co, Cu, Pb, Mn, Ni, and Zn) from the soil samples by inductively coupled plasma-optical emission spectrometry (ICP-OES). Two indigenous T. harzianum strains were selected for copper tolerance, and three indigenous T. longibrachiatum strains were selected for nickel tolerance tests. Strains were isolated from the soils with the highest and among the lowest DTPA-extractable metal concentrations to determine whether the adaptation to different concentrations of metals affects the mechanisms of remediation. Mechanisms of metal removal were determined using Fourier-transform infrared spectroscopy (FTIR) and X-ray fluorescence spectroscopy (XRF), non-destructive methods characterized by high measurement speed with little or no need for sample preparation and very low costs. Increased DTPA-extractable metal content for nickel and copper was detected in the soil samples above the target value (TV), and for nickel above the soil remediation intervention values (SRIVs), for total metal concentrations which were previously determined. The SRIV is a threshold of metal concentrations indicating a serious soil contamination, thus confirming the need for soil remediation. The use of FTIR and XRF methods revealed that the presence of both biosorption and accumulation of metals in the Trichoderma cells, providing good bioremediation potential for Ni and Cu.

Isolation of Hexavalent chromium tolerant fungal species from urban vegetable farm soil and effluent waste in Addis Ababa& Rift valley, Ethiopia

Hexavalent chromium is resistant to degradation and harmful toxic substance to environment and community health. Physicochemical treatment methods are demanding high cost, used large quantities of chemicals & energy, release large amount of secondary toxic degradants. Mycoremediation is an eco-friendly alternative treatment method. The main objective of this research is to isolate and characterize chrome (VI) tolerant fungi from farm soil & industry effluent for mycoremedation purpose. The screening and isolation of yeast was carried out on potato dextrose agar media. PDA and broth assay test for fungi tolerance to hexavalent chromium at different concentration, temperature and pH was evaluated. Fungi species was identified biochemically using Biolog Microstation depending on carbon utilization and chemical sensitivity test. The result revealed that 10 yeast species was identified with full ID from effluent waste and farm soil based on their probability ≥  75% and similarity index ≥  0.5 as well as their Cr (VI) tolerance ability up to 2500 ppm. These are Yarrowia lipolytica (100%, 0.7), Cryptococcus luteolus(100%, 0.64), Rhodotorula aurantiaca A(100%, 0.62), Ustilago maydis(100%, 0.58) Trichosporon beigelii B (100%, 0.51), Cryptococcus terreus A (100%, 0.62), Zygosaccharomyces bailii (98%, 0.65), Nadsoniafulvenscens (90%, 0.62), Schizoblastosporonstarkeyihenricii (89%, 0.56), Endomycopsis vivi (84%, 0.62), Rhodotorula pustula (Sim, 0.59). Two yeast species Yarrowia lipolytica and Nadsoniafulvenscens show the highest growth mean Optical density (OD) measure 0.74 ± 0.2 & 0.60 ± 0.2 respectively at pH 7 & 25 °C. The highest tolerance index (mm) was recorded by Schizoblastosporon starkey henricii 0.3067 ± 0.152. Cr (VI)-tolerance ability of these yeast strains used in the development of chromium-bioremediation technologies provide an alternative option for chromium sequestration after HPLC analysis& molecular characterization.

Biosorption potential and molecular characterization of metal-resistant autochthonous microbes from tannery solid waste

This study encompasses isolation and screening of heavy metal-resistant fungal and bacterial strains from tannery solid waste (TSW). Twelve fungal strains and 25 bacterial strains were isolated from TSW. The growth of fungal strains was observed against different heavy metals ranging from 10 to 1050 mg L^-1 and the growth of bacteria was observed in metal concentrations ranging from 10 to 1200 mg L^-1. Five multi-metal-resistant fungal isolates belonging to the genus Trichoderma and ten bacterial isolates belonging to the genus Bacillus showed good metal resistance and biosorption potential. They were identified through molecular techniques, fungi based on ITS region ribotyping, and bacteria based on 16S rRNA ribotyping. The fungal strains were characterized as T. hamatum (TSWF-06), T. harzianum (TSWF-11), T. lixii (TSWF-02), and T. pseudokoningii (TSWF-03, TSWF-10). The bacterial strains were characterized as Bacillus xiamenensis (TSW-02), B. velezensis (TSW-05), B. piscis (TSW-06), B. safensis (TSW-10), B. subtilis (TSW-14, TSW-15, TSW-17) B. licheniformis (TSW-19), B. cereus (TSW-20), and B. thuringiensis (TSW-22). The fungal strains, namely, T. pseudokoningii (TSWF-03) and T. harzianum, proved to be two multi-metal-resistant strains with good biosorption efficiency. Unlike fungi, bacterial strains showed metal-specific resistance. The strains Bacillus xiamenensis, B. subtilis (TSW-14), and B. subtilis (TSW-15) showed good biosorption efficiency against Cr, B. safensis against Cu, B. piscis, and B. subtilis (TSW-17) against Pb and B. licheniformis and B. thuringiensis against Zn. The autochthonous fungal and bacterial strains can therefore be employed to clean metal-contaminated environments.

Integrative chemical and omics analyses reveal copper biosorption and tolerance mechanisms of Bacillus cereus strain T6

A comprehensive understanding of the cellular response of microbes to metal stress is necessary for the rational development of microbe-based biosorbents for metal removal. The present study investigated the copper (Cu) sorption and resistance mechanism of Bacillus cereus strain T6, a newly isolated Cu-resistant bacterium, by integrative analyses of physiochemistry, genomics, transcriptomics, and metabolomics. The growth inhibition assay and biosorption determination showed that this bacterium exhibited high tolerance to Cu, with a minimum inhibitory concentration of 4.0 mM, and accumulated Cu by both extracellular adsorption and intracellular binding. SEM microscopic images and FTIR spectra showed significant cellular surface changes at the high Cu level but not at low, and the involvement of surface functional groups in the biosorption of Cu, respectively. Transcriptomic and untargeted metabolomic analyses detected 362 differentially expressed genes and 60 significantly altered metabolites, respectively. Integrative omics analyses revealed that Cu exposure dramatically induced a broad spectrum of genes involved in Cu transport and iron homeostasis, and suppressed the denitrification pathway, leading to significant accumulation of metabolites for metal transporter synthesis, membrane remolding, and antioxidant activities. The results presented here provide a new perspective on the intricate regulatory network of Cu homeostasis in bacteria.

Mitigation of hazards and risks of emerging pollutants through innovative treatment techniques of post methanated distillery effluent - A review

Distillery wastewater has high biological and chemical oxygen demand and requires additional treatment before it can be safely discharged into receiving water. It is usually processed through a biomethanation digester and the end product is the post-methanated distillery effluent (PMDE). Research have shown that PMDE released by molasses-based distilleries is a hazardous effluent that can cause harm to the biota and the environment; it contains elevated amount of total dissolved solids (TDS), total suspended solids (TSS) and excess levels of persistent organic compounds (POPs), heavy metals, phenolic compounds, and salts. The practice of wastewater reuse for irrigation in many water scarce countries necessitates the proper treatment of PMDE before it is discharged into receiving water. Convention methods have been in practice for decades, but innovative technologies are needed to enhance the efficiency of PMDE treatment. Advance physical treatment such as membrane separation technology using graphene, ion-exchange and ultrafiltration membranes; chemical treatment such as advanced oxidation methods, electrocoagulation and photocatalytic technologies; biological treatment such as microbial and enzymatic treatment; and hybrid treatment such as microbial-fuel cell (MFC), genetically modified organisms (GMO) and constructed wetland technologies, are promising new methods to improve the quality of PMDE. This review provides insight into current accomplishments evaluates their suitability and discusses future developments in the detoxification of PMDE. The consolidated knowledge will help to develop a better management for the safe disposal and the reuse of PMDE wastewater.

Hybrid LSTM-ARMA Demand-Forecasting Model Based on Error Compensation for Integrated Circuit Tray Manufacturing

Demand forecasting plays a crucial role in a company’s operating costs. Excessive inventory can increase costs and unnecessary waste can be reduced if managers plan for uncertain future demand and determine the most favorable decisions. Managers are demanding increasing accuracy in forecasting as technology advances. Most of the literature discusses forecasting results’ inaccuracy by suspending the model and reloading the data for model retraining and correction, which is extensively employed but causes a bottleneck in practice since users do not have the sufficient ability to correct the model. This study proposes an error compensation mechanism and uses the individuals and moving-range (I-MR) control chart to evaluate the requirement for compensation to solve the current bottleneck using forecasting models. The approach is validated using the case companies’ historical data, and the model is developed using a rolling long short-term memory (LSTM) to output the predicted values; then, five indicators are proposed for screening to determine the prediction statistics to be subsequently employed. Root mean squared error (RMSE), mean absolute percentage error (MAPE), and mean absolute error (MAE) compare the LSTM, rolling LSTM combined index, and LSTM-autoregressive moving average (ARMA) models. The results demonstrate that the RMSE, MAPE, and MAE of LSTM-ARMA are smaller than those of the other two models, indicating that the error compensation mechanism that is proposed in this study can enhance the prediction’s accuracy.

Effects of the Urease Concentration and Calcium Source on Enzyme-Induced Carbonate Precipitation for Lead Remediation

Heavy metal contamination during the rapid urbanization process in recent decades has notably impacted our fragile environments and threatens human health. However, traditional remediation approaches are considered time-consuming and costly, and the effect sometimes does not meet the requirements expected. The present study conducted test tube experiments to reproduce enzyme-induced carbonate precipitation applied to lead remediation under the effects of urease concentration and a calcium source. Furthermore, the speciation and sequence of the carbonate precipitation were simulated using the Visual MINTEQ software package. The results indicated that higher urease concentrations can assure the availability of CO3 2- during the enzyme-induced carbonate precipitation (EICP) process toward benefiting carbonate precipitation. The calcium source determines the speciation of carbonate precipitation and subsequently the Pb remediation efficiency. The use of CaO results in the dissolution of Pb(OH)2 and, therefore, discharges Pb ions, causing some difficulty in forming the multi-layer structure of carbonate precipitation and degrading Pb remediation. The findings of this study are useful in widening the horizon of applications of the enzyme-induced carbonate precipitation technology to heavy metal remediation.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.

Study on the aerobic remediation of Ni(II) by Pseudomonas hibiscicola strain L1 interaction with nitrate

Aerobic denitrifying bacteria have the potential to remove the co-pollutants Ni(II) and nitrate in industrial wastewater. In this study, aerobic denitrifying bacteria with significant Ni(II) removal efficiency was isolated from the biological reaction tank and named as Pseudomonas hibiscicola L1 strain after 16 S rRNA identification analysis. The removal of ever-increasing Ni(II) and NO₃^--N wastewater under aerobic conditions by strain L1 was discussed. The experimental results showed that strain L1 removed 84% of Ni(II) and 81% of COD, with the use of 34.8 mg L^-1 of nitrogen source and without nitrite accumulation yet. Strain L1 had remarkable activity (OD₆₀₀ = 0.51-0.56 (p < 0.05)) at 20 mg L^-1 of Ni(II) and 100 mg L^-1 of NO₃^--N. It was found that high Ni(II) gradients (2-10 mg L^-1) had little effect on nitrate removal ratio (35-34% (p > 0.05), and the removal ratios of Ni(II) was enhanced (from 42% to 83% (p < 0.05)) by increasing nitrate (25-100 mg L^-1). Also, the results indicated that strain L1 could reduce Ni(II) and nitrate under different pH (6-9); electron donor-glucose, sodium acetate, sodium succinate and trisodium citrate; C/N (5-20) and coexisting ions (Cu(II) and Zn(II)). Notably, the nitrogen balance analysis showed 32.4% of TN was lost nitrogen and 19.7% of TN was assimilated for cell growth, which indicated aerobic denitrification process of strain L1. Meanwhile, characterization technology (SEM, FTIR, and XRD) showed Ni(II) was bioadsorbed in the form of Ni(NH₂)₂, NiCO₃, and Ni(OH)₂·2H₂O through surface functional groups. This research provides new microbial method for the simultaneous removal of nitrate and Ni(II) in wastewater.

Mycoremediation of heavy metals: processes, mechanisms, and affecting factors

Industrial processes and mining of coal and metal ores are generating a number of threats by polluting natural water bodies. Contamination of heavy metals (HMs) in water and soil is the most serious problem caused by industrial and mining processes and other anthropogenic activities. The available literature suggests that existing conventional technologies are costly and generated hazardous waste that necessitates disposal. So, there is a need for cheap and green approaches for the treatment of such contaminated wastewater. Bioremediation is considered a sustainable way where fungi seem to be good bioremediation agents to treat HM-polluted wastewater. Fungi have high adsorption and accumulation capacity of HMs and can be potentially utilized. The most important biomechanisms which are involved in HM tolerance and removal by fungi are bioaccumulation, bioadsorption, biosynthesis, biomineralisation, bioreduction, bio-oxidation, extracellular precipitation, intracellular precipitation, surface sorption, etc. which vary from species to species. However, the time, pH, temperature, concentration of HMs, the dose of fungal biomass, and shaking rate are the most influencing factors that affect the bioremediation of HMs and vary with characteristics of the fungi and nature of the HMs. In this review, we have discussed the application of fungi, involved tolerance and removal strategies in fungi, and factors affecting the removal of HMs.

Bioremediation mechanism and potential of copper by actively growing fungus Trichoderma lixii CR700 isolated from electroplating wastewater

Present study investigated the Cu²⁺ removal potential of Trichoderma lixii CR700, isolated from enormously heavy metal polluted electroplating wastewater. In the batch study, actively growing CR700 was able to remove 84.6% of Cu²⁺ at the concentration 10 mg/L of Cu²⁺ within 120 h after incubation and the accumulated and surface adsorbed amount of Cu was 0.51 and 0.47 mg/g of dry biomass respectively. T. lixii CR700 also showed efficient Cu²⁺ removal potential in the pH ranges from 5.0 to 8.0, in the presence of other co-occurring contaminant such as heavy metal, anions and metabolic inhibitor as well from real tannery wastewater. Alteration on cell surface of Cu²⁺ treated mycelia of T. lixii CR700 was analyzed using scanning electron microscope. Fourier transform infrared spectroscopic analysis was performed to identify the role of surface functional group in Cu²⁺ adsorption which revealed that COO^─ functional group lead Cu²⁺ adsorption onto the surface of T. lixii CR700. Thus, T. lixii CR700 uses simultaneous surface sorption and accumulation mechanism in Cu²⁺ removal and can be potentially applied for bioremediation of Cu²⁺ contaminated wastewater in ecofriendly, safe and sustainable way.

Bioremediation of oily sludge polluted soil employing a novel strain of Pseudomonas aeruginosa and phytotoxicity of petroleum hydrocarbons for seed germination

Agricultural land pollution is key a problem globally, which is linked with growth of industries. Petroleum industrial sector is one of the major industrial sectors and the activities of petroleum industry lead to the agricultural land pollution. Oily sludge is a type of solid and hazardous waste generated from petroleum industrial activities. Hence, there is an urgent need to find remediation methods of the oily sludge contaminated agricultural land. Thus, the aim of this work was to study bioremediation of oily sludge polluted soil employing a novel strain of Pseudomonas aeruginosa and evaluation of phytotoxicity on germination of Vigna radiata seed in pots. Five different approaches were adopted for the bioremediation studies, which included Bioaugmentation + Biostimulation, bioaugmentation, biostimulation, natural attenuation and abiotic factors. Simultaneous application of P. aeruginosa NCIM 5514 and nutrients in microcosm showed 92.97 ± 0.92% decrease in oily sludge with good hydrocarbon utilizing bacterial count and decreased nutrient level in 56 days. Pot experiments on seed germination of mung beans (Vigna radiata) seeds was performed by pot experiments. 80.95% germination in five days in treated soil. From the results it was concluded that simultaneous use of oily sludge degraders and nutrient supplement could revive seed germination ability of oily sludge polluted soil effectively. This is first report of comparing five techniques to bioremediate oily sludge polluted soil using Pseudomonas aeruginosa, followed by pot study using V. radiata seeds, showing that P. aeruginosa can be an efficient bioremediation agent and can be effectively used for remediation of oily sludge contaminated soil.

Bioremediation of Hexavalent Chromium by Chromium Resistant Bacteria Reduces Phytotoxicity

Chromium (Cr) (VI) has long been known as an environmental hazard that can be reduced from aqueous solutions through bioremediation by living cells. In this study, we investigated the efficiency of reduction and biosorption of Cr(VI) by chromate resistant bacteria isolated from tannery effluent. From 28 screened Cr(VI) resistant isolates, selected bacterial strain SH-1 was identified as Klebsiella sp. via 16S rRNA sequencing. In Luria–Bertani broth, the relative reduction level of Cr(VI) was 95%, but in tannery effluent, it was 63.08% after 72 h of incubation. The cell-free extract of SH-1 showed a 72.2% reduction of Cr(VI), which indicated a higher activity of Cr(VI) reducing enzyme than the control. Live and dead biomass of SH-1 adsorbed 51.25 mg and 29.03 mg Cr(VI) per gram of dry weight, respectively. Two adsorption isotherm models—Langmuir and Freundlich—were used for the illustration of Cr(VI) biosorption using SH-1 live biomass. Scanning electron microscopy (SEM) analysis showed an increased cell size of the treated biomass when compared to the controlled biomass, which supports the adsorption of reduced Cr on the biomass cell surface. Fourier-transform infrared analysis indicated that Cr(VI) had an effect on bacterial biomass, including quantitative and structural modifications. Moreover, the chickpea seed germination study showed beneficial environmental effects that suggest possible application of the isolate for the bioremediation of toxic Cr(VI).