Accounting for the solubility–permeability interplay in oral formulation development for poor water solubility drugs: The effect of PEG-400 on carbamazepine absorption

DNA nanotechnology in ionic liquids and deep eutectic solvents

Nucleic acids have the ability to generate advanced nanostructures in a controlled manner and can interact with target sequences or molecules with high affinity and selectivity. For this reason, they have applications in a variety of nanotechnology applications, from highly specific sensors to smart nanomachines and even in other applications such as enantioselective catalysis or drug delivery systems. However, a common disadvantage is the use of water as the ubiquitous solvent. The use of nucleic acids in non-aqueous solvents offers the opportunity to create a completely new toolbox with unprecedented degrees of freedom. Ionic liquids (ILs) and deep eutectic solvents (DESs) are the most promising alternative solvents due to their unique electrolyte and solvent roles, as well as their ability to maintain the stability and functionality of nucleic acids. This review aims to be a comprehensive, critical, and accessible evaluation of how much this goal has been achieved and what are the most critical parameters for accomplishing a breakthrough.

Controlling the Solubility, Release Rate and Permeation of Riluzole with Cyclodextrins

Riluzole (RLZ), a sodium channel-blocking benzothiazole anticonvulsant BCS class II drug, is very slightly soluble in aqueous medium. To improve aqueous solubility and modulate dissolution rate and membrane permeability, complex formation of RLZ with two cyclodextrin, α-cyclodextrin (α-CD) and sulfobutylether-β-cyclodextrin (SBE-β-CD), was studied. The stability constants demonstrated a greater affinity of SBE-β-CD towards RLZ compared to α-CD. A solubility growth of 1.7-fold and 3.7-fold with α-CD and SBE-β-CD, respectively, was detected in the solutions of 1% cyclodextrins and accompanied by the permeability reduction. For 1% CD solutions, several biopolymers (1% w/v) were tested for the membrane permeability under static conditions. The synergistic positive effect of α-CD and polymer on the solubility accompanied by unchanged permeability was revealed in RLZ/α-CD/PG, RLZ/α-CD/PEG400, and RLZ/α-CD/PEG1000 systems. Solid RLZ/CD complexes were prepared. Dynamic dissolution/permeation experiments for the solid samples disclosed the characteristic features of the release processes and permeation rate through different artificial membranes. The maximal permeation rate was determined across the hydrophilic semi-permeable cellulose membrane followed by the lipophilic PermeaPad barrier (model of intestinal and buccal absorption) and polydimethylsiloxane-polycarbonate membrane (simulating transdermal delivery way). Different mode of the permeation between the membranes was estimated and discussed.

Ethanol-based solubility-enabling oral drug formulation development: Accounting for the solubility-permeability interplay

The aim of the current work was to investigate the key factors that govern the success/failure of an ethanol-based solubility-enabling oral drug formulation, including the effects of the ethanol on the solubility of the drug, the permeability across the intestinal membrane, the drug's dissolution in the aqueous milieu of the gastrointestinal tract (GIT), and the resulting solubility-permeability interplay. The concentration-dependent effects of ethanol-based vehicles on the solubility, the in-vitro Caco-2 permeability, the in-vivo rat permeability, and the biorelevant dissolution of the BCS class II antiepileptic drug carbamazepine were studied, and a predictive model describing the solubility-permeability relationship was developed. Significant concentration-dependent solubility increase of CBZ was obtained with increasing ethanol levels, that was accompanied by permeability decrease, both in Caco-2 and in rat perfusion studies, demonstrating a tradeoff between the increased solubility afforded by the ethanol and a concomitant permeability decrease. When ethanol absorption was accounted for, an excellent agreement was achieved between the predicted permeability and the experimental data. Biorelevant dissolution studies revealed that minimal ethanol levels of 30 % and 50 % were needed to fully dissolve 1 and 5 mg CBZ dose respectively, with no drug precipitation.In conclusion, key factors to be accounted for when developing ethanol-based formulation include the drug's solubility, permeability, the solubility-permeability interplay, and the drug dose intended to be delivered. Only the minimal amount of ethanol sufficient to solubilize the drug dose throughout the GIT should be used, and not more than that, to avoid unnecessarily permeability loss, and to maximize overall drug absorption.

Sensitivity assessment of diphacinone by pharmacokinetic analysis in invasive black rats in the Bonin (Ogasawara) Archipelago, Japan

The Bonin Archipelago is a United Nations Educational, Scientific and Cultural Organization's World Natural Heritage Site in Japan with a unique ecosystem; however, the invasive rodents preying on endemic species have been a significant concern. The anticoagulant rodenticide, diphacinone, sprayed by the Ministry of the Environment, has succeeded; however, its repeated use leads to rodenticide resistance. This study evaluated the sensitivity by in vivo pharmacokinetics/pharmacodynamics (PK/PD) analysis and physiologically-based pharmacokinetic modeling to diphacinone in black rats (Rattus rattus) captured on the Bonin Archipelago in February 2022. The Bonin rats exhibited prolonged coagulation time after diphacinone administration. They recovered earlier than susceptible black rats, indicating that Bonin rats were less susceptible, though there were no genetic mutations in Vkorc1, the target enzyme of diphacinone. After the administration of diphacinone, hepatic expression levels of Fsp1, identified as the vitamin K reductase, was decreased, however, the Bonin rats exhibited the most minor suppression. The PK analysis showed that the excretion capacity of the Bonin rats was lower than that of the resistant black rats. In the PBPK modeling, the resistant black rats showed higher clearance than the Bonin and susceptible black rats due to high hepatic metabolic capacity. The Bonin rats demonstrated slow absorption and relatively low clearance. This study highlighted the reduced rodenticide-sensitive tendency of wild black rats in the Bonin Archipelago at an in vivo phenotype level. At the same time, they do not have known rodenticide resistance mechanisms, such as hepatic metabolic enhancement or Vkorc1 mutations. It is crucial to monitor the biological levels to evaluate rodenticide sensitivity accurately.

Mechanistic Insight in Permeability through Different Membranes in the Presence of Pharmaceutical Excipients: A Case of Model Hydrophobic Carbamazepine

The present study reports the effects of two pharmaceutical excipients of differing natures-non-ionic surfactant pluronic F127 (F127) and anionic sulfobutylether-β-cyclodextrin (SBE-β-CD)-on the permeation of the model compound, carbamazepine (CBZ). The permeability coefficients of CBZ at three concentrations of the excipients were measured through two different artificial barriers: hydrophilic cellulose membrane (RC) and lipophilic polydimethylsiloxane-polycarbonate membrane (PDS). The equilibrium solubility of CBZ in F127 and SBE-β-CD solutions was determined. The micellization, complexation, and aggregation tendencies were investigated. Systemically increasing the solubility and the reduction of permeation upon the excipients' concentration growth was revealed. The quantitative evaluation of the permeability tendencies was carried out using a Pratio parameter, a quasi-equilibrium mathematical mass transport model, and a correction of permeability coefficients for the free drug concentration ("true" permeability values). The results revealed the mutual influence of the excipient properties and the membrane nature on the permeability variations.

Solubility-enabling formulations for oral delivery of lipophilic drugs: considering the solubility-permeability interplay for accelerated formulation development

INTRODUCTION

Tackling low water solubility of drug candidates is a major challenge in today's pharmaceutics/biopharmaceutics, especially by means of modern solubility-enabling formulations. However, drug absorption from these formulations oftentimes remains unchanged or even decreases, despite substantial solubility enhancement.

AREAS COVERED

In this article, we overview the simultaneous effects of the formulation on the solubility and the apparent permeability of the drug, and analyze the contribution of this solubility-permeability interplay to the success/failure of the formulation to increase the overall absorption and bioavailability. Three different patterns of interplay were identified: (1) solubility-permeability tradeoff in which every solubility gain comes with a price of concomitant permeability loss; (2) an advantageous interplay pattern in which the permeability remains unchanged alongside the solubility gain; and (3) an optimal interplay pattern in which the formulation increases both the solubility and the permeability. Passive vs. active intestinal permeability considerations in the context of the solubility-permeability interplay are also thoroughly discussed.

EXPERT OPINION

The solubility-permeability interplay pattern of a given formulation has a critical effect on its overall success/failure, and hence, taking into account both parameters in solubility-enabling formulation development is prudent and highly recommended.

Pharmaceutical Methods for Enhancing the Dissolution of Poorly Water-Soluble Drugs

Low water solubility is the main hindrance in the growth of pharmaceutical industry. Approximately 90% of newer molecules under investigation for drugs and 40% of novel drugs have been reported to have low water solubility. The key and thought-provoking task for the formulation scientists is the development of novel techniques to overcome the solubility-related issues of these drugs. The main intention of present review is to depict the conventional and novel strategies to overcome the solubility-related problems of Biopharmaceutical Classification System Class-II drugs. More than 100 articles published in the last 5 years were reviewed to have a look at the strategies used for solubility enhancement. pH modification, salt forms, amorphous forms, surfactant solubilization, cosolvency, solid dispersions, inclusion complexation, polymeric micelles, crystals, size reduction, nanonization, proliposomes, liposomes, solid lipid nanoparticles, microemulsions, and self-emulsifying drug delivery systems are the various techniques to yield better bioavailability of poorly soluble drugs. The selection of solubility enhancement technique is based on the dosage form and physiochemical characteristics of drug molecules.

Carbamazepine Therapy After Bariatric Surgery: Eight Sleeve Gastrectomy Cases and Review of the Literature

Bariatric surgery modifies the anatomy and physiology of the gastrointestinal tract. Carbamazepine (CBZ) is an anticonvulsant with multiple neuropsychiatric indications. Given CBZ physicochemical properties and narrow therapeutic index, bariatric surgery may potentially introduce clinically significant changes in CBZ oral absorption and bioavailability. In this communication, we describe eight patients undergoing sleeve gastrectomy (SG) and treated with CBZ, including therapeutic drug monitoring (TDM) and dosage adjustments at different timeframes before vs. after the surgery (< 3, 4-6, and 7-12 months post-SG), as well as clinical outcomes. We then provide a review of the available literature on CBZ therapy among bariatric patients, concluding with a mechanistic analysis of the results. Four of the eight patients presented with decreased post-SG CBZ levels, and two of them also experienced significant worsening of their previously well-controlled disease. Overall, altered CBZ levels are likely for at least a year after SG. Clinical recommendations include consultation with a clinical pharmacist, careful clinical monitoring, and periodic TDM after (vs. before) the bariatric surgery.

Cyclodextrins and drug membrane permeation: Thermodynamic considerations

Cyclodextrins are hydrophilic oligosaccharides that can increase aqueous solubility of lipophilic drugs through formation of water-soluble drug/cyclodextrin complexes. Although the complexes are hydrophilic, and as such do not permeate biological membranes, the complexes are known to enhance drug permeation through lipophilic membranes and improve drug bioavailability after, for example, oral administration. However, it is not clear how cyclodextrins enhance the permeation. An artificial biomembrane (PermeaPad®) was used to study the effect of donor medium composition on drug permeation. It was observed that in aqueous solutions the hydrophilic cyclodextrins behave not like disperse systems but rather like organic cosolvents such as ethanol, increasing the solubility without having significant effect on the molecular mobility and ability of lipophilic drug molecules to partition into the lipophilic membrane. Also, that partition of dissolved drug molecules from the aqueous exterior into the membrane is at its maximum when their thermodynamic activity is at its maximum. In other words, that drug flux from aqueous cyclodextrin solutions through lipophilic membranes depends on both the concentration and the thermodynamic activity of dissolved drug. Maximum flux is obtained when both the drug concentration and thermodynamic activity of the dissolved drug molecules are at their maximum value.

Best practices in current models mimicking drug permeability in the gastrointestinal tract - an UNGAP review

The absorption of orally administered drug products is a complex, dynamic process, dependent on a range of biopharmaceutical properties; notably the aqueous solubility of a molecule, stability within the gastrointestinal tract (GIT) and permeability. From a regulatory perspective, the concept of high intestinal permeability is intrinsically linked to the fraction of the oral dose absorbed. The relationship between permeability and the extent of absorption means that experimental models of permeability have regularly been used as a surrogate measure to estimate the fraction absorbed. Accurate assessment of a molecule's intestinal permeability is of critical importance during the pharmaceutical development process of oral drug products, and the current review provides a critique of in vivo, in vitro and ex vivo approaches. The usefulness of in silico models to predict drug permeability is also discussed and an overview of solvent systems used in permeability assessments is provided. Studies of drug absorption in humans are an indirect indicator of intestinal permeability, but in vitro and ex vivo tools provide initial screening approaches are important tools for direct assessment of permeability in drug development. Continued refinement of the accuracy of in silico approaches and their validation with human in vivo data will facilitate more efficient characterisation of permeability earlier in the drug development process and will provide useful inputs for integrated, end-to-end absorption modelling.

Amorphous Form of Carvedilol Phosphate-The Case of Divergent Properties

The amorphous form of carvedilol phosphate (CVD) was obtained as a result of grinding. The identity of the obtained amorphous form was confirmed by powder X-ray diffraction (PXRD), different scanning calorimetry (DSC), and FT-IR spectroscopy. The process was optimized in order to obtain the appropriate efficiency and time. The crystalline form of CVD was used as the reference standard. Solid dispersions of crystalline and amorphous CVD forms with hydrophilic polymers (hydroxypropyl-β-cyclodextrin, Pluronic^® F-127, and Soluplus^®) were obtained. Their solubility at pH 1.2 and 6.8 was carried out, as well as their permeation through a model system of biological membranes suitable for the gastrointestinal tract (PAMPA-GIT) was established. The influence of selected polymers on CVD properties was defined for the amorphous form regarding the crystalline form of CVD. As a result of grinding (four milling cycles lasting 15 min with 5 min breaks), amorphous CVD was obtained. Its presence was confirmed by the “halo effect” on the diffraction patterns, the disappearance of the peak at 160.5 °C in the thermograms, and the changes in position/disappearance of many characteristic bands on the FT-IR spectra. As a result of changes in the CVD structure, its lower solubility at pH 1.2 and pH 6.8 was noted. While the amorphous dispersions of CVD, especially with Pluronic^® F-127, achieved better solubility than combinations of crystalline forms with excipients. Using the PAMPA-GIT model, amorphous CVD was assessed as high permeable (Papp > 1 × 10⁻⁶ cm/s), similarly with its amorphous dispersions with excipients (hydroxypropyl-β-cyclodextrin, Pluronic^® F-127, and Soluplus^®), although in their cases, the values of apparent constants permeability were decreased.

Physicochemical Characterization and Biopharmaceutical Evaluation of ZWF: A Novel Anticancer Drug for the Treatment of Non-small Cell Lung Cancer

The orally available novel small molecule drug ZWF is under preclinical development for an anticancer purpose. The present study aimed to assess the viability of developing ZWF as a form of oral formulation for clinical application based on the principles of biopharmaceutics and pharmacokinetics. The crucial physicochemical properties of ZWF were determined by in vitro assays. The in situ gastrointestinal absorption characteristics and in vivo pharmacokinetic behaviors of ZWF in rats were characterized. The solubility of ZWF showed a highly pH-dependent profile, decreasing from 25,392.89 to 20.48 μg/mL as the solution pH increased from 1.0 to 5.8. In PBS with a pH of 1.0 to 5.8, the LogP value of ZWF ranged from -2.35 to 2.20 and was gradually increased as the pH value increased. ZWF was partially absorbed in the stomach, and the favorable absorption sites were the duodenum, jejunum, and ileum. Pharmacokinetic studies showed that the AUC_(0-t) and C_max values of ZWF after its oral administration as a suspension prepared with 0.5% CMC-Na were increased by 18.97% and 40% than that with normal saline, providing a model oral formulation of ZWF with ideal bioavailability and system exposure in rats. From the perspective of oral absorption, ZWF possessed appealing qualities as a drug candidate and could be prepared as an oral preparation for clinical application. The present study has established a fundamental foundation for the development and quality evaluation of the ZWF oral formulations.

The relevance of supersaturation and solubilization in the gastrointestinal tract for oral bioavailability: An in vitro vs. in vivo approach

The influence of supersaturation and solubilization on oral absorption was assessed independently from the dissolution process for the non-formulated model drugs celecoxib and telmisartan. In vitro, physicochemical characterization and biphasic dissolution were used to characterize the supersaturation and solubilization effects of three water soluble polymers (copovidone, methylcellulose and Soluplus®) on the drugs. While celecoxib precipitated in a crystalline form resulting in pronounced stabilization of supersaturation, telmisartan precipitated as a highly energetic amorphous form and the potential of the polymers to enhance its solubility was subsequently, limited. In vivo, for the crystalline precipitating celecoxib, supersaturation and solubilization increased its oral bioavailability up to 10-fold. On the contrary, the amorphous precipitating telmisartan did not benefit from the limited stabilization in terms of oral exposure. Amongst all investigated in vitro tests the biphasic dissolution test was the most predictive in relation to supersaturation. However, for the potential micellar solubilization and the respective impact in the aqueous/organic interface, prediction accuracy of the biphasic dissolution test was limited in combination with Soluplus®. Despite the hetergeneous micellar distribution in vitro and permeation in vivo, the biphasic approach could clearly show the supersaturation potential on bioavailability (BA) for celecoxib on the one hand and the inferiority of supersaturation on BA for telmisartan.

Biowaiver Monograph for Immediate-Release Solid Oral Dosage Forms: Carbamazepine

Literature relevant to assessing whether BCS-based biowaivers can be applied to immediate release (IR) solid oral dosage forms containing carbamazepine as the single active pharmaceutical ingredient are reviewed. Carbamazepine, which is used for the prophylactic therapy of epilepsy, is a non-ionizable drug that cannot be considered "highly soluble" across the range of pH values usually encountered in the upper gastrointestinal tract. Furthermore, evidence in the open literature suggests that carbamazepine is a BCS Class 2 drug. Nevertheless, the oral absolute bioavailability of carbamazepine lies between 70 and 78% and both in vivo and in vitro data support the classification of carbamazepine as a highly permeable drug. Since the therapeutic and toxic plasma level ranges overlap, carbamazepine is considered to have a narrow therapeutic index. For these reasons, a BCS based biowaiver for IR tablets of carbamazepine cannot be recommended. Interestingly, in nine out of ten studies, USP dissolution conditions (900 mL water with 1% SLS, paddle, 75 rpm) appropriately discriminated among bioinequivalent products and this may be a way forward to predicting whether a given formulation will be bioequivalent to the comparator product.

Adequate formulation approach for oral chemotherapy: Etoposide solubility, permeability, and overall bioavailability from cosolvent- vs. vitamin E TPGS-based delivery systems

Injectable-to-oral conversions for anticancer drugs represent an important trend. The goal of this research was to investigate the suitability of formulation approaches for anticancer oral drug delivery, aiming to reveal mechanistic insights that may guide oral chemotherapy development. TPGS vs. PEG-400 were studied as oral formulations for the anticancer drug etoposide, accounting for drug solubility, biorelevant dissolution, permeability, solubility-permeability interplay, and overall bioavailability. Increased etoposide solubility was demonstrated with both excipients. Biorelevant dissolution revealed that TPGS or PEG-400, but not aqueous suspension, allowed complete dissolution of the entire drug dose. Both TPGS and PEG-400 resulted in decreased in-vitro etoposide permeability across artificial membrane, i.e. solubility-permeability tradeoff. While PEG-400 resulted in the same solubility-permeability tradeoff also in-vivo, TPGS showed the opposite trend: the in-vivo permeability of etoposide was markedly increased in the presence of TPGS. This increased permeability was similar to the drug permeability under P-gp inhibition. Rat PK study demonstrated significantly higher etoposide bioavailability from TPGS vs. PEG-400 or suspension (AUC of 72, 41, and 26 µg·min/mL, respectively). All in all, TPGS-based delivery system allows overcoming the solubility-permeability tradeoff, increasing systemic etoposide exposure. Since poor solubility and strong efflux are common to many anticancer agents, this work can aid in the development of better oral delivery approach for chemotherapeutic drugs.

The Solubility-Permeability Interplay for Solubility-Enabling Oral Formulations

The Biopharmaceutical classification system (BCS) classifies the drugs based on their intrinsic solubility and intestinal permeability. The drugs with good solubility and intestinal permeability have good bioavailability. The drugs with poor solubility and poor permeability have solubility dependent and permeability dependent bioavailability, respectively. In the current pharmaceutical field, most of the drugs have poor solubility. To solve the problem of poor solubility, various solubility enhancement approaches have been successfully used. The effects of these solubility enhancing approaches on the intestinal permeability of the drugs are a matter of concern, and must not be overlooked. The current review article focuses on the effect of various solubility enhancing approaches viz. cyclodextrin, surfactant, cosolvent, hydrotropes, and amorphous solid dispersion, on the intestinal permeability of drugs. This article will help in the designing of the optimized formulations having balanced solubility enhancement without affecting the permeability of drugs.

The solubility, permeability and the dose as key factors in formulation development for oral lipophilic drugs: Maximizing the bioavailability of carbamazepine with a cosolvent-based formulation

The purpose of this research was to investigate drug dose, solubility, permeability, and their interplay, as key factors in oral formulation development for lipophilic drugs. A PEG400-based formulation was studied for five doses of the lipophilic drug carbamazepine, accounting for biorelevant dissolution of the dose in the GIT, and in-vivo bioavailability in rats. With the three lower doses (10, 25 and 50 mg/kg), complete in-vitro dissolution was achieved and maintained throughout the experiment with this formulation, while significant precipitation was obtained with higher doses (100 and 200 mg/kg). Likewise, the studied formulation allowed complete bioavailability in-vivo with the three lower doses, while the same formulation allowed only 76% and 42% bioavailability for the 100 and 200 mg/kg doses, respectively. There was good correlation between the in-vitro and in-vivo results. In conclusion, this work demonstrates that the dose is a crucial factor in formulation development; while a given formulation may be optimal for a certain drug dose, it may no longer be optimal for higher doses of the same drug. Hence, the solubility, the permeability, and their interplay, have to be considered in light of the drug dose intended to be administered in order to achieve successful oral formulation development.

Methacrylate-Copolymer Eudragit EPO as a Solubility-Enabling Excipient for Anionic Drugs: Investigation of Drug Solubility, Intestinal Permeability, and Their Interplay

The purpose of this work was to investigate the use of the dimethylaminoethyl methacrylate-copolymer Eudragit EPO (EPO) in oral solubility-enabling formulations for anionic lipophilic drugs, aiming to guide optional formulation design and maximize oral bioavailability. We have studied the solubility, the permeability, and their interplay, using the low-solubility nonsteroidal anti-inflammatory drug mefenamic acid as a model drug. Then, we studied the biorelevant solubility enhancement of mefenamic acid from EPO-based formulations throughout the gastrointestinal tract (GIT), using the pH-dilution dissolution method. EPO allowed a profound and linear solubility increase of mefenamic acid, from 10 μg/mL without EPO to 9.41 mg/mL in the presence of 7.5% EPO (∼940-fold; 37 °C); however, a concomitant decrease of the drug permeability was obtained, both in vitro and in vivo in rats, indicating a solubility-permeability trade-off. In the absence of an excipient, the unstirred water layer (UWL) adjacent to the GI membrane was found to hinder the permeability of the drug, accounting for this UWL effect and revealing that the true membrane permeability allowed good prediction of the solubility-permeability trade-off as a function of EPO level using a direct relationship between the increased solubility afforded by a given EPO level and the consequent decreased permeability. Biorelevant dissolution studies revealed that EPO levels of 0.05 and 0.1% were insufficient to dissolve mefenamic acid dose during the entire dissolution time course, whereas 0.5 and 1% EPO allowed complete solubility with no drug precipitation. In conclusion, EPO may serve as a potent solubility-enabling excipient for BCS class II/IV acidic drugs; however, it should be used carefully. It is prudent to use the minimal EPO amounts just sufficient to dissolve the drug dose throughout the GIT and not more than that. Excess amounts of EPO provide no solubility gain and cause further permeability loss, jeopardizing the overall success of the formulation. This work may help the formulator to hit the optimal solubility-permeability balance, maximizing the oral bioavailability afforded by the formulation.

In vitro digestion models to evaluate lipid based drug delivery systems; present status and current trends

During the past two decades, a range of in vitro models simulating the digestion processes occurring in the stomach and small intestine have been developed to characterize lipid based drug delivery systems (LbDDSs). This review describes the presently existing range of in vitro digestion models and their use in the field of oral drug delivery. The models are evaluated in terms of their suitability to assess LbDDSs, and their ability to produce in vitro - in vivo correlations (IVIVCs). While the pH-stat lipolysis model is by far the most commonly utilized in vitro digestion model in relation to characterizing LbDDSs, a series of recent studies have shown a lack of IVIVCs limiting its future use. Presently, no single in vitro digestion model exists which is able to predict the in vivo performance of various LbDDSs. However, recent research has shown the potential of combined digestion-permeation models as well as species specific digestion models.

Evaluation of a self-nanoemulsifying docetaxel delivery system

A self-nanoemulsifying drug delivery system (SNEDDS) was developed as a novel route to enhance the efficacy of docetaxel lipophilic drug. SNEDDS comprised ethyl oleate, Tween 80 and poly(ethylene glycol) 600, as oil, surfactant and co-surfactant, and formed stabilized monodispersed oil nanodroplets upon dilution in water. SNEDDS represented encapsulation efficiency and loading capacity of 21.4 and 52.7%, respectively. The docetaxel release profile from the drug-loaded SNEDDS was recorded, its effectiveness against MCF-7 cell line was investigated, and an IC₅₀ value of 0.98 ± 0.05 μg mL^-1 was attained. The drug-loaded SNEDDS was administrated in rats, and the pharmacokinetic parameters of maximum concentration of 22.2 ± 0.8 μg mL^-1, time to attain this maximum concentration of 230 min, and area under the curve of 1.71 ± 0.18 μg min mL^-1 were obtained. The developed SNEDDS formulation can be represented as an alternative to docetaxel administration.

The impact of food intake on the luminal environment and performance of oral drug products with a view to in vitro and in silico simulations: a PEARRL review

Objectives

Using the type of meal and dosing conditions suggested by regulatory agencies as a basis, this review has two specific objectives: first, to summarize our understanding on the impact of food intake on luminal environment and drug product performance and second, to summarize the usefulness and limitations of available in vitro and in silico methodologies for the evaluation of drug product performance after food intake.

Key findings

Characterization of the luminal environment and studies evaluating product performance in the lumen, under conditions suggested by regulatory agencies for simulating the fed state, are limited. Various in vitro methodologies have been proposed for evaluating drug product performance in the fed state, but systematic validation is lacking. Physiologically based pharmacokinetic (PBPK) modelling approaches require the use of in vitro biorelevant data and, to date, have been used primarily for investigating the mechanisms via which an already observed food effect is mediated.

Summary

Better understanding of the impact of changes induced by the meal administration conditions suggested by regulatory agencies on the luminal fate of the drug product is needed. Relevant information will be useful for optimizing the in vitro test methods and increasing the usefulness of PBPK modelling methodologies.

Investigating Permeation Behavior of Flufenamic Acid Cocrystals Using a Dissolution and Permeation System

The dissolution and permeation of the cocrystals, flufenamic acid-nicotinamide (FFA-NIC) and flufenamic acid-theophylline (FFA-TP), have been investigated in the presence of two polymers, polyvinylpyrrolidone (PVP) and copolymer of vinylpyrrolidone/vinyl acetate (PVP-VA), using a dissolution/permeation (D/P) system. It showed that the types and concentrations of the polymers and their interactions with the coformers had significant effects on the dissolution and permeation of the FFA cocrystals. The role of PVP as a stabilizing agent was not altered in spite of its interaction with the coformer of NIC or TP, which was supported by the proportional flux rate of FFA to the dissolution performance parameter (DPP). With an appropriate PVP concentration, the maximal flux rate of FFA could be obtained for a given FFA cocrystal. The situation was complicated in the presence of PVP-VA. The role of PVP-VA could change because of its association with the coformers, i.e., from a stabilizing agent to a solubilization agent. In addition, PVP-VA reduced the flux rate of FFA, in contrast to its DPP for FFA cocrystals. Finally, ¹H NMR provided evidence regarding the molecular interactions between FFA, coformers, and polymers at the atomic level and gave insight into the mechanism underlying the supersaturated solution and subsequent permeation behavior of the cocrystals.

Segmental-Dependent Intestinal Drug Permeability: Development and Model Validation of In Silico Predictions Guided by In Vivo Permeability Values

The goal of this work was to develop an in silico model that allows predicting segmental-dependent permeability throughout the small intestine (SI). In vivo permeability of 11 model drugs in 3 SI segments (jejunum, mid-SI, ileum) was studied in rats, creating a data set that reflects the conditions throughout the SI. Then, a predictive model was developed, combining physicochemical drug properties influencing the underlying mechanism of passive permeability: Log p, polar surface area, M_W, H-bond count, and Log f_u, with microenvironmental SI conditions. Excellent correlation was evident between the predicted and experimental data (R² = 0.914), with similar predictability in each SI segment. Log p and Log f_u were identified as the major determinants of permeability, with similar contribution. Total H-bond count was also a significant determinant, followed by polar surface area and M_W. Leaving out any of the model parameters decreased its predictability. The model was validated against 5 external drugs, with excellent predictability. Notably, the model was able to predict the segmental-dependent permeability of all drugs showing this trend experimentally. Model predictability was better in the high-permeability versus low-permeability range. Overall, our approach of constructing a straightforward in silico model allowed reliable predictions of segmental-dependent intestinal permeability, providing new insights into relative effects of drug-related factors and gastrointestinal environment on permeability.

Ranking Itraconazole Formulations Based on the Flux through Artificial Lipophilic Membrane

PURPOSE

The goal of the study was to evaluate a miniaturized dissolution-permeation apparatus (μFLUX™ apparatus) for its ability to benchmark several itraconazole (ITZ) formulations for which in vivo PK data was available in the literature.

METHOD

Untreated and micronized powders of ITZ and various enabling formulations of ITZ (commercial Sporanox® solid dispersion, a Soluplus®-based solid dispersion and a nanosuspension) were introduced to the donor compartment of μFLUX™ apparatus. Donor and acceptor chambers were divided from each other by a lipophilic membrane. In addition to the flux evaluations, changes in solid state as a function of time were investigated to gain further insight into the flux changes observed over time for the solid dispersion formulations.

RESULTS

Initial flux values from Sporanox®, the nanosuspension and the micronized ITZ showed ratios of 52/4/1 with a decreasing flux from nanosuspension and both solid dispersions after 2.5-3 h. Although the initial flux from the Soluplus® formulation was 2.2 times lower than the one observed for Sporanox®, the decrease in flux observed was milder and became ~ 2 times higher than Sporanox® after approximately 2.5 h. The total amounts of ITZ in the receiver compartment after 240 min showed the same rank order as the rodent AUCs of these formulations reported in literature.

CONCLUSIONS

It was demonstrated that in vitro flux measurements using lipophilic artificial membranes could correctly reproduce the rank order of PK results for ITZ formulations. The drop in flux over time for solid dispersions could be backed by experimental indications of crystallization.

Enhanced oral absorption of pemetrexed by ion-pairing complex formation with deoxycholic acid derivative and multiple nanoemulsion formulations: preparation, characterization, and in vivo oral bioavailability and anticancer effect

Objective

The current study sought to design an oral delivery system of pemetrexed (PMX), a multitargeted antifolate antimetabolite, by enhancing its intestinal membrane permeability.

Materials and methods

PMX was ionically complexed with a permeation enhancer such as N^α-deoxycholyl-l-lysyl-methylester (DCK) and prepared as an amorphous solid dispersion by mixing with dispersants such as 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD) and poloxamer 188 (P188), forming an HP-beta-CD/PMX/DCK/P188; the complex was incorporated into multiple water-in-oil-in-water nanoemulsions in a supersaturated state (HP-beta-CD/PMX/DCK/P188-NE).

Results

After complex formation, the partition coefficient and in vitro membrane permeability of PMX were markedly increased, but it showed similar cytotoxic and inhibitory effects on cancer cell proliferation/migration. Furthermore, the intestinal membrane permeability and epithelial cell uptake of PMX were synergistically improved after HP-beta-CD/PMX/DCK/P188 was incorporated into a nanoemulsion with a size of 14.5±0.45 nm. The in vitro permeability of HP-beta-CD/PMX/DCK/P188-NE across a Caco-2 cell monolayer was 9.82-fold greater than that of free PMX, which might be attributable to the partitioning of PMX to the epithelial cells being facilitated via specific interaction of DCK with bile acid transporters, as well as the enhanced lipophilicity accompanied by surfactant-induced changes in the intestinal membrane structure and fluidity. Therefore, the oral bioavailability of HP-beta-CD/PMX/DCK/P188-NE in rats was evaluated as 26.8%±2.98% which was 223% higher than that of oral PMX. Moreover, oral HP-beta-CD/PMX/DCK/P188-NE significantly suppressed tumor growth in Lewis lung carcinoma cell-bearing mice, and the tumor volume was maximally inhibited by 61% compared with that in the control group.

Conclusion

These results imply that HP-beta-CD/PMX/DCK/P188-NE is an effective and promising delivery system for enhancing the oral absorption of PMX. Thus, there is the potential for new medical applications, including applications in metronomic cancer treatment.

Closed-Loop Doluisio (Colon, Small Intestine) and Single-Pass Intestinal Perfusion (Colon, Jejunum) in Rat-Biophysical Model and Predictions Based on Caco-2

PURPOSE

The effective rat intestinal permeability (P _eff ) was deconvolved using a biophysical model based on parameterized paracellular, aqueous boundary layer, transcellular permeabilities, and the villus-fold surface area expansion factor.

METHODS

Four types of rat intestinal perfusion data were considered: single-pass intestinal perfusion (SPIP) in the jejunum (n = 40), and colon (n = 15), closed-loop (Doluisio type) in the small intestine (n = 78), and colon (n = 74). Moreover, in vitro Caco-2 permeability values were used to predict rat in vivo values in the rat data studied.

RESULTS

Comparable number of molecules permeate via paracellular water channels as by the lipoidal transcellular route in the SPIP method, although in the closed-loop method, the paracellular route appears dominant in the colon. The aqueous boundary layer thickness in the small intestine is comparable to that found in unstirred in vitro monolayer assays; it is thinner in the colon. The mucosal surface area in anaesthetized rats is 0.96-1.4 times the smooth cylinder calculated value in the colon, and it is 3.1-3.6 times in the small intestine. The paracellular permeability of the intestine appeared to be greater in rat than human, with the colon showing more leakiness (higher P _para ) than the small intestine.

CONCLUSION

Based on log intrinsic permeability values, the correlations between the in vitro and in vivo models ranged from r² 0.82 to 0.92. The SPIP-Doluisio method comparison indicated identical log permeability selectivity trend with negligible bias.

Active intestinal drug absorption and the solubility-permeability interplay

The solubility-permeability interplay deals with the question: what is the concomitant effect on the drug's apparent permeability when increasing the apparent solubility with a solubility-enabling formulation? The solubility and the permeability are closely related, exhibit certain interplay between them, and ongoing research throughout the past decade shows that treating the one irrespectively of the other may be insufficient. The aim of this article is to provide an overview of the current knowledge on the solubility-permeability interplay when using solubility-enabling formulations for oral lipophilic drugs, highlighting active permeability aspects. A solubility-enabling formulation may affect the permeability in opposite directions; the passive permeability may decrease as a result of the apparent solubility increase, according to the solubility-permeability tradeoff, but at the same time, certain components of the formulation may inhibit/saturate efflux transporters (when relevant), resulting in significant apparent permeability increase. In these cases, excipients with both solubilizing and e.g. P-gp inhibitory properties may lead to concomitant increase of both the solubility and the permeability. Intelligent development of such formulation will account for the simultaneous effects of the excipients' nature/concentrations on the two arms composing the overall permeability: the passive and the active arms. Overall, thorough mechanistic understanding of the various factors involved in the solubility-permeability interplay may allow developing better solubility-enabling formulations, thereby exploiting the advantages analyzed in this article, offering oral delivery solution even for BCS class IV drugs.

Gastrointestinal behavior of itraconazole in humans - Part 2: The effect of intraluminal dilution on the performance of a cyclodextrin-based solution

Hydroxypropyl-β-cyclodextrin (HP-β-CD) is known to enable absorption of the lipophilic drug itraconazole. Since the interaction between HP-β-CD and itraconazole is characterized by a non-lineair, A_P-type phase-solubility diagram, the present study aimed to investigate the influence of intraluminal dilution (water intake) on the behavior and performance of an orally administered cyclodextrin-based solution of itraconazole. Subsequently, the in vivo behavior was simulated by combining in vitro dilution with permeation assessment. After the administration of a Sporanox^® solution to healthy volunteers with or without a glass of water, gastrointestinal and systemic concentrations of itraconazole were simultaneously monitored. Independently of the intake of water, no gastric precipitation of itraconazole was observed. After transfer to the duodenum, precipitation occurred and was more pronounced in the condition with water, resulting in a 7.6-fold reduction in duodenal AUC_0-3h compared to the condition without water. Nevertheless, plasma concentration-time profiles did not demonstrate any significant differences in AUC_0-8h, C_max and t_max. Application of freshly aspirated intestinal fluids on Caco-2 cells clearly confirmed that higher intestinal itraconazole concentrations after intake of Sporanox^® without water do not generate a substantially increased itraconazole uptake. A two-stage in vitro dilution test was combined with a permeation compartment to capture this solubility-permeability interplay. In conclusion, this work demonstrates that variations in intraluminal dilution may have a drastic impact on the gastrointestinal behavior of lipophilic drugs in the presence of cyclodextrins. In the case of an AP-type interaction with cyclodextrins, the trade-off between solubility and permeability may be affected.

Advantageous Solubility-Permeability Interplay When Using Amorphous Solid Dispersion (ASD) Formulation for the BCS Class IV P-gp Substrate Rifaximin: Simultaneous Increase of Both the Solubility and the Permeability

Rifaximin is a BCS class IV (low-solubility, low-permeability) drug and also a P-gp substrate. The aims of this work were to assess the efficiency of different rifaximin amorphous solid dispersion (ASDs) formulations in achieving and maintaining supersaturation and to investigate the consequent solubility-permeability interplay. Spray-dried rifaximin ASDs were prepared with different hydrophilic polymers and their ability to achieve and maintain supersaturation was assessed. Then, rifaximin's apparent intestinal permeability was investigated as a function of increasing supersaturation both in vitro using the parallel artificial membrane permeability assay (PAMPA) and in vivo using the single-pass rat intestinal perfusion (SPIP) model. The efficiency of the different ASDs to achieve and maintain supersaturation of rifaximin was found to be highly polymer dependent, and the copovidone/HPC-SL formulation was found to be superior to the other two, allowing supersaturation of 200× that of the crystalline solubility for 20 h. In vitro, rifaximin flux was increased and the apparent permeability was constant as a function of increasing supersaturation level. In vivo, on the other hand, absorption rate coefficient (k _a) was first constant as a function of increasing supersaturation, but at 250×, the crystalline solubility k _a was doubled, similar to the k _a in the presence of the strong P-gp inhibitor GF120918. In conclusion, a new and favorable nature of solubility-permeability interplay was revealed in this work: delivering high supersaturation level of the BCS class IV drug rifaximin via ASD, thereby saturating the drugs' P-gp-mediated efflux transport, led to the favorable unique win-win situation, where both the solubility and the permeability increased simultaneously.

Polyethylene glycol 400 (PEG400) affects the systemic exposure of oral drugs based on multiple mechanisms: taking berberine as an example

High concentrations of PEG400 increase in vivo exposure to berberine (D) by increasing its solubility (A), permeability (B), and lymphatic transport (C).

Striking the Optimal Solubility-Permeability Balance in Oral Formulation Development for Lipophilic Drugs: Maximizing Carbamazepine Blood Levels

The purpose of this research was to investigate the performance of cosolvent based solubility-enabling formulations in oral delivery of lipophilic drugs, accounting for the gastrointestinal tract (GIT) luminal solubilization processes, the solubility-permeability interplay, and the overall in vivo systemic absorption. The poorly soluble antiepileptic agent carbamazepine was formulated in three cosolvent-based formulations: 20%, 60%, and 100% PEG-400, and the apparent solubility and rat permeability of the drug in these formulations were evaluated. The performance of the formulations in the dynamic GIT environment was assessed utilizing the biorelevant pH-dilution method. Then, the overall in vivo drug exposure was investigated following oral administration to rats. The three formulations showed dramatic solubility and permeability differences; the 100% PEG-400 provided the highest solubility enhancement and the 20% the poorest, while the exact opposite was evident from the permeability point of view. The dissolution results indicated that the 20% PEG-400 formulation crashes quickly following oral administration, but both the 60% and the 100% PEG-400 formulations allowed full solubilization of the dose throughout the entire GIT-like journey. The best in vivo performing formulation was the 60% PEG-400 (F_sys > 90%), followed by the 100% PEG-400 (F_sys = 76%), and the 20% PEG-400 formulation (F_sys ≈ 60%). In conclusion, this work demonstrates the in vivo solubility-permeability trade-off in oral delivery of lipophilic drugs; when a solubility-enabling formulation is developed, minimal threshold solubility should be targeted, that is just enough to allow solubilization of the drug dose throughout the GIT, while excess solubilizer should be avoided.

Hydrotropic Solubilization of Lipophilic Drugs for Oral Delivery: The Effects of Urea and Nicotinamide on Carbamazepine Solubility-Permeability Interplay

Hydrotropy refers to increasing the water solubility of otherwise poorly soluble compound by the presence of small organic molecules. While it can certainly increase the apparent solubility of a lipophilic drug, the effect of hydrotropy on the drugs’ permeation through the intestinal membrane has not been studied. The purpose of this work was to investigate the solubility–permeability interplay when using hydrotropic drug solubilization. The concentration-dependent effects of the commonly used hydrotropes urea and nicotinamide, on the solubility and the permeability of the lipophilic antiepileptic drug carbamazepine were studied. Then, the solubility–permeability interplay was mathematically modeled, and was compared to the experimental data. Both hydrotropes allowed significant concentration-dependent carbamazepine solubility increase (up to ∼30-fold). A concomitant permeability decrease was evident both in vitro and in vivo (∼17-fold for nicotinamide and ∼9-fold for urea), revealing a solubility–permeability tradeoff when using hydrotropic drug solubilization. A relatively simplified simulation approach based on proportional opposite correlation between the solubility increase and the permeability decrease at a given hydrotrope concentration allowed excellent prediction of the overall solubility–permeability tradeoff. In conclusion, when using hydrotropic drug solubilization it is prudent to not focus solely on solubility, but to account for the permeability as well; achieving optimal solubility–permeability balance may promote the overall goal of the formulation to maximize oral drug exposure.

The solubility-permeability interplay and oral drug formulation design: Two heads are better than one

Poor aqueous solubility is a major challenge in today's biopharmaceutics. While solubility-enabling formulations can significantly increase the apparent solubility of the drug, the concomitant effect on the drug's apparent permeability has been largely overlooked. The mathematical equation to describe the membrane permeability of a drug comprises the membrane/aqueous partition coefficient, which in turn is dependent on the drug's apparent solubility in the GI milieu, suggesting that the solubility and the permeability are closely related, exhibit a certain interplay between them, and treating the one irrespectively of the other may be insufficient. In this article, an overview of this solubility-permeability interplay is provided, and the available data is analyzed in the context of the effort to maximize the overall drug exposure. Overall, depending on the type of solubility-permeability interplay, the permeability may decrease, remain unchanged, and even increase, in a way that may critically affect the formulation capability to improve the overall absorption. Therefore, an intelligent design of solubility-enabling formulation needs to consider both the solubility afforded by the formulation and the permeability in the new luminal environment resulting from the formulation.