New biomimetic barrier Permeapad™ for efficient investigation of passive permeability of drugs

Comparison of in vitro screening methods for evaluating the effects of pharmaceutical excipients on membrane permeability

The effects of pharmaceutical excipients on intestinal drug absorption have been highlighted and careful excipient selection is required to develop biologically equivalent formulations. This study aimed to evaluate the effects of excipients on drug permeability and compare the characteristics of in vitro screening methods. Three in vitro models, the commercial precoated parallel artificial membrane permeability assay (PAMPA), PermeaPadTM, and Caco-2 monolayer, were used to evaluate the effects of 14 excipients on the permeability of several drugs with different biopharmaceutical classification system classes. Concentration-dependent effects were analyzed to distinguish non-specific effects. The permeability of low-permeability drugs was increased by excipients such as hydroxypropyl cellulose and povidone K30 in the precoated PAMPA model, whereas PermeaPadTM maintained membrane integrity at higher concentrations. Conversely, croscarmellose sodium and sodium lauryl sulfate (SLS) decreased the permeability of highly permeable drugs in both precoated PAMPA and PermeaPadTM assays in a concentration-dependent manner. In Caco-2 monolayer assays, most excipients showed minimal effects on drug permeability. However, SLS significantly reduces the permeability of highly permeable drugs at concentrations above the critical micelle concentration, thereby compromising the integrity of the cell monolayer. Our results suggested that most of excipients, except SLS, did not affect the membrane permeation of drugs at clinically used concentrations. The pre-coated PAMPA model demonstrated high sensitivity to excipient effects, making it suitable for conservative evaluation. The PermeaPadTM and Caco-2 models allowed assessment at higher excipient concentrations, with PermeaPadTM being particularly useful for excipients that cause toxicity in Caco-2 cells.

Permeability of triamcinolone acetonide, released from mucoadhesive films, through a buccal mucosa-mimetic barrier: Permeapad™

OBJECTIVES

The permeability of triamcinolone acetonide (TA), from bilayer mucoadhesive buccal films, through a biomimetic membrane, Permeapad™, was investigated employing Franz diffusion cell. The delivery systems composition and ethyl cellulose (EC) backing layer, on drug permeability, were assessed.

METHODS

Three TA-loaded films were tested; hydroxypropyl methylcellulose (HPMC K4M; bilayer [F1] and monolayer), HPMC K4M/Polyvinylpyrrolidone (PVP): 90/10 [F2], and HPMC K15M film [F3]. All films contained propylene glycol (PG-plasticiser). TA solution alone was used as a control. TA permeability via a Permeapad™ barrier, simulating buccal mucosa, was assessed over 8 h using a Franz diffusion cell. TA permeated into the receptor compartment, released in the donor compartment, and located on/within the Permeapad™ barrier were analysed using UV-spectrophotometer.

RESULTS

45.7 % drug retention within the Permeapad™ barrier was delivered from F1 (highest). F1, F2, and F3 significantly improved the TA's permeability through Permeapad™, compared to TA solution alone (e.g., 8.5 % TA-solution, 21.5 %-F1), attributed to the synergy effect of HPMC and propylene glycol acting as penetration enhancers. F1 displayed a significant increase in drug permeability (receptor compartment; 21.5 %) compared to F3 (17.0 %). PVP significantly enhanced drug permeability (27.5 %). Impermeable EC backing layer controlled unidirectional drug release and reduced drug loss into the donor compartment (e.g., ∼28 % for monolayer film to ∼10 % for bilayer film, F1).

SIGNIFICANCE

The mucoadhesive films demonstrated improved TA permeability via Permeapad™. The findings suggest that these bilayer mucoadhesive films, particularly F1, hold promise for the effective topical treatment of oral mucosa disorders, such as recurrent aphthous stomatitis and oral lichen planus.

Shifting the Focus from Dissolution to Permeation: Introducing the Meso-fluidic Chip for Permeability Assessment (MCPA)

In response to the growing ethical and environmental concerns associated with animal testing, numerous in vitro tools of varying complexity and biorelevance have been developed and adopted in pharmaceutical research and development. In this work, we present one of these tools, i.e., the Meso-fluidic Chip for Permeability Assessment (MCPA), for the first time. The MCPA combines an artificial barrier (PermeaPad®) with an organ-on-chip device (MIVO®) and real-time automated concentration measurements, to yield a sustainable, yet effortless method for permeation testing. The system offers three major physiological aspects, i.e., a biomimetic membrane, an optimal membrane interfacial area-to-donor-volume-ratio (A/V) and a physiological flow on the acceptor/basolateral side, which makes the MPCA an ideal candidate for mechanistic studies and excellent in vivo bioavailability predictions. We validated the method with a handful of assorted drug compounds in unstirred and stirred donor conditions, before exploring its applicability as a tool for dissolution/permeation testing on a BCS class III/I drug (pyrazinamide) crystalline adducts and BCS class II/IV (hydrocortisone) amorphous solid dispersions. The results were highly reproducible and clearly displayed the method's potential for evaluating the performance of enabling formulations, and possibly even predicting in vivo performance. We believe that, upon further development, the MCPA will serve as a useful in vitro tool that could push sustainability into pharmaceutics by refining, reducing and replacing animal testing in early-stage drug development.

Selenium-Methionine-Folic Acid Nanoparticles (SeMetFa NPs) and Its In Vivo Efficacy Against Rheumatoid Arthritis

Selenium nanoparticles can be beneficial against rheumatoid arthritis, with limitations in dosage formulation due to their toxicity and low bioavailability. In the present study, we investigated the bioavailability and in vivo efficiency of selenium-methionine-folic acid nanoparticles (SeMetFa NPs) in chronic inflammatory arthritis in rats. The purpose of this study was to develop a therapeutic agent that is of low toxicity and readily available for the maintenance of rheumatoid arthritis. SeMetFa NPs were synthesised by a wet chemical method (precipitation using a reducing agent). The apparent permeability (Papp) of NPs was investigated to be 10 × 10-6 cm/s. The effect of selenium-methionine-folic acid nanoparticles (SeMetFa NPs) on rats was investigated for oxidative status, anti-inflammatory markers, physical characteristics, radiography of the paw region, and histopathology. Groups with 250 and 500 mg/kg b.w SeMetFa NPs acted as a potent anti-inflammatory agent with reduced (p < 0.05) arthritis-induced parameters in a 21-day study on Wistar rats. The antioxidant enzyme levels in the liver, kidney, and spleen were restored significantly at 500 and 750 mg/kg b.w. Concluding SeMetFa NPs at a concentration of 500 mg/kg b.w. can be a potential therapeutic agent as compared to dextrin-coated nanoparticles.

Nanonization and Deformable Behavior of Fattigated Peptide Drug in Mucoadhesive Buccal Films

This study was tasked with the design of mucoadhesive buccal films (MBFs) containing a peptide drug, leuprolide (LEU), or its diverse nanoparticles (NPs), for enhanced membrane permeability via self-assembled nanonization and deformable behavior. An LEU-oleic acid conjugate (LOC) and its self-assembled NPs (LON) were developed. Additionally, a deformable variant of LON (d-LON) was originally developed by incorporating l-α-phosphatidylcholine into LON as an edge activator. The physicochemical properties of LON and d-LON, encompassing particle size, zeta potential, and deformability index (DI), were evaluated. MBFs containing LEU, LOC, and NPs (LON, d-LON) were prepared using the solvent casting method by varying the ratio of Eudragit RLPO and hydroxypropyl methylcellulose, with propylene glycol used as a plasticizer. The optimization of MBF formulations was based on their physicochemical properties, including in vitro residence time, dissolution, and permeability. The dissolution results demonstrated that the conjugation of oleic acid to LEU exhibited a more sustained LEU release pattern by cleaving the ester bond of the conjugate, as compared to the native LEU, with reduced variability. Moreover, the LOC and its self-assembled NPs (LON, d-LON), equivalent to 1 mg LEU doses in MBF, exhibited an amorphous state and demonstrated better permeability through the nanonization process than LEU alone, regardless of membrane types. The incorporation of lauroyl-L-carnitine into the films as a permeation enhancer synergistically augmented drug permeability. Most importantly, the d-LON-loaded buccal films showed the highest permeability, due to the deformability of NPs. Overall, MBF-containing peptide NPs and permeation enhancers have the potential to replace parenteral LEU administration by improving LEU druggability and patient compliance.

Structure-Activity Relationship Studies and Optimization of 4-Hydroxypyridones as GPR84 Agonists

GPR84 is a putative medium-chain fatty acid receptor that is implicated in regulation of inflammation and fibrogenesis. Studies have indicated that GPR84 agonists may have therapeutic potential in diseases such as Alzheimer's disease, atherosclerosis, and cancer, but there is a lack of quality tool compounds to explore this potential. The fatty acid analogue LY237 (4a) is the most potent GPR84 agonist disclosed to date but has unfavorable physicochemical properties. We here present a SAR study of 4a. Several highly potent agonists were identified with EC50 down to 28 pM, and with SAR generally in excellent agreement with structure-based modeling. Proper incorporation of rings and polar groups resulted in the identification of TUG-2099 (4s) and TUG-2208 (42a), both highly potent GPR84 agonists with lowered lipophilicity and good to excellent solubility, in vitro permeability, and microsomal stability, which will be valuable tools for exploring the pharmacology and therapeutic prospects of GPR84.

In situ setup for screening of drug permeation by NMR spectroscopy

There are various commercially available setups for studying drug permeation, which differ in cost and manual labor. We explore an artificial membrane in an NMR tube to assess drug permeation with automated measurements. NMR-based concentrations were validated with HPLC and compared to a conventional setup. Setup-specific challenges and workarounds as well as future setup-designs for this and other applications are discussed.

Interpreting permeability as a function of free drug fraction: The case studies of cyclodextrins and liposomes

In order to solubilize poorly soluble active pharmaceutical ingredients, various strategies have been implemented over the years, including the use of nanocarriers, such as cyclodextrins and liposomes. However, improving a drug's apparent solubility does not always translate to enhanced bioavailability. This work aimed to investigate to which extent complexation with cyclodextrins and incorporation into liposomes influence drug in vitro permeability and to find a mechanistic description of the permeation process. For this purpose, we investigated hydroxypropyl-β-cyclodextrin (HP-β-CD) and phosphatidylcholine liposomes formulations of three chemically diverse compounds (atenolol, ketoprofen and hydrocortisone). We studied drug diffusion of the formulations by UV-localized spectroscopy and advanced data fitting to extract parameters such as diffusivity and bound-/free drug fractions. We then correlated this information with in vitro drug permeability obtained with the novel PermeaPadⓇ barrier. The results showed that increased concentration of HP-β-CD leads to increased solubilization of the poorly soluble unionized ketoprofen, as well as hydrocortisone. However, this net increment of apparent solubility was not proportional to the increased flux measured. On the other hand, normalising the flux over the empirical free drug concentration, i.e., the free fraction, gave a meaningful absolute permeability coefficient. The results achieved for the liposomal formulation were consistent with the finding on cyclodextrins. In conclusion, we proved the adequacy and usefulness of our method for calculating free drug fractions in the examined enabling formulations, supporting the validity of the established drug diffusion/permeation theory that the unbounded drug fraction is the main driver for drug permeation across a membrane.

In vitro dissolution/permeation tools for amorphous solid dispersions bioavailability forecasting I: Experimental design for PermeaLoop™

Along with the increasing demand for candidate-enabling formulations comes the need for appropriate in vitro bioavailability forecasting. Dissolution/permeation (D/P) systems employing cell-free permeation barriers are increasingly gaining interest, due to their low cost and easy application as passive diffusion bio-predictive profiling in drug product development, as this accounts for nearly 75% of new chemical entities (NCEs) absorption mechanism. To this end, this study comprises theoretical considerations on the design and experimental work towards the establishment and optimization of a PermeaLoop™ based dissolution/permeation assay to simultaneously evaluate the drug release and permeation using Itraconazole (ITZ)-based amorphous solid dispersions (ASD) formulations, with different drug loads, based on a solvent-shift approach. Alternative method conditions were tested such as: donor medium, acceptor medium and permeation barrier were screened using both PermeaPad® and PermeaPlain® 96-well plates. A range of solubilizers, namely Sodium Dodecyl Sulfate, Vitamin E-TPGS and hydroxypropyl-β-cyclodextrin, were screened as possible solubilizing additives to the acceptor medium, while donor medium was varied between blank FaSSIF (phosphate buffer) and FaSSIF. The method optimization also included the ITZ dose selection, being the ITZ single dose (100 mg) considered the most adequate to be used in further experiments to allow the comparison with in vivo studies. In the end, a standardized approach that may be applied to predict the bioavailability of weakly basic poorly soluble drug-based formulations is described, contributing to strengthening the analytical portfolio of in vitro pre-clinical drug product development.

Development of a buccal in vitro permeation method - exploring aQbD implementation

The buccal mucosa is arising within the pharmaceutical landscape as an attractive option for local and systemic drug delivery, mostly due to its high vascularization, inherent permeability and robustness. Still, one of the major challenges in bringing oromucosal preparations to market remains the accurate evaluation of permeability. During pre-clinical drug development, in vitro permeation assessment is essential, and methodologies, based on the selection of a proper membrane in a diffusion cell, have become appealing alternatives to the conventional cell-based models. The development of such methods is being constrained by the number of variables - related to study conditions, setup and formulation - that need to be optimized to accurately estimate buccal permeation. The gap of knowledge over the mentioned variables may lead to long costly developments and poorly accurate methods, especially if the empirical analytical approach is used. In this paper, a systematic risk-based analytical quality by design approach was applied to the development of a buccal in vitro permeation method, ensuring that all sources of variability affecting permeation process were identified, explained and managed by appropriate measures. Researchers are guided through a step by step model, successfully demonstrating with experimental data the impact of critical variables on method's performance.

Predictions from First-Principles of Membrane Permeability to Small Molecules: How Useful Are They in Practice?

Predicting from first-principles the rate of passive permeation of small molecules across the biological membrane represents a promising strategy for screening lead compounds upstream in the drug-discovery and development pipeline. One popular avenue for the estimation of permeation rates rests on computer simulations in conjunction with the inhomogeneous solubility-diffusion model, which requires the determination of the free-energy change and position-dependent diffusivity of the substrate along the translocation pathway through the lipid bilayer. In this Perspective, we will clarify the physical meaning of the membrane permeability inferred from such computer simulations, and how theoretical predictions actually relate to what is commonly measured experimentally. We will also examine why these calculations remain both technically challenging and overly computationally expensive, which has hitherto precluded their routine use in nonacademic settings. We finally synopsize possible research directions to meet these challenges, increase the predictive power of physics-based rates of passive permeation, and, by ricochet, improve their practical usefulness.

Modulation of Distribution and Diffusion through the Lipophilic Membrane with Cyclodextrins Exemplified by a Model Pyridinecarboxamide Derivative

The main aims of the study were to disclose the influence of the structure on the solubility, distribution and permeability of the parent substances, iproniazid (IPN), isoniazid (INZ) and isonicotinamide (iNCT), at 310.2 K and to evaluate how the presence of cyclodextrins (2-hydroxypropyl-β-cyclodextrin (HP-β-CD) and methylated β-cyclodextrin (M-β-CD)) affects the distribution behavior and diffusion properties of a model pyridinecarboxamide derivative, iproniazid (IPN). The following order of decreasing the distribution and permeability coefficients was estimated: IPN > INZ > iNAM. A slight reduction of the distribution coefficients in the 1-octanol/buffer pH 7.4 and n-hexane/buffer pH 7.4 systems (more pronounced in the first system) was revealed. The extremely weak IPN/cyclodextrins complexes were estimated from the distribution experiments: K_C(IPN/HP-β-CD) > K_C(IPN/M-β-CD). The permeability coefficients of IPN through the lipophilic membrane-the PermeaPad barrier-were also measured with and without cyclodextrins in buffer solution. Permeability of iproniazid was increased in the presence of M-β-CD and reduced by HP-β-CD.

Design and Characterization of an Ethosomal Gel Encapsulating Rosehip Extract

Rising environmental awareness drives green consumers to purchase sustainable cosmetics based on natural bioactive compounds. The aim of this study was to deliver Rosa canina L. extract as a botanical ingredient in an anti-aging gel using an eco-friendly approach. Rosehip extract was first characterized in terms of its antioxidant activity through a DPPH assay and ROS reduction test and then encapsulated in ethosomal vesicles with different percentages of ethanol. All formulations were characterized in terms of size, polydispersity, zeta potential, and entrapment efficiency. Release and skin penetration/permeation data were obtained through in vitro studies, and cell viability was assessed using an MTT assay on WS1 fibroblasts. Finally, ethosomes were incorporated in hyaluronic gels (1% or 2% w/v) to facilitate skin application, and rheological properties were studied. Rosehip extract (1 mg/mL) revealed a high antioxidant activity and was successfully encapsulated in ethosomes containing 30% ethanol, having small sizes (225.4 ± 7.0 nm), low polydispersity (0.26 ± 0.02), and good entrapment efficiency (93.41 ± 5.30%). This formulation incorporated in a hyaluronic gel 1% w/v showed an optimal pH for skin application (5.6 ± 0.2), good spreadability, and stability over 60 days at 4 °C. Considering sustainable ingredients and eco-friendly manufacturing technology, the ethosomal gel of rosehip extract could be an innovative and green anti-aging skincare product.

Commercially Available Cell-Free Permeability Tests for Industrial Drug Development: Increased Sustainability through Reduction of In Vivo Studies

Replacing in vivo with in vitro studies can increase sustainability in the development of medicines. This principle has already been applied in the biowaiver approach based on the biopharmaceutical classification system, BCS. A biowaiver is a regulatory process in which a drug is approved based on evidence of in vitro equivalence, i.e., a dissolution test, rather than on in vivo bioequivalence. Currently biowaivers can only be granted for highly water-soluble drugs, i.e., BCS class I/III drugs. When evaluating poorly soluble drugs, i.e., BCS class II/IV drugs, in vitro dissolution testing has proved to be inadequate for predicting in vivo drug performance due to the lack of permeability interpretation. The aim of this review was to provide solid proofs that at least two commercially available cell-free in vitro assays, namely, the parallel artificial membrane permeability assay, PAMPA, and the PermeaPad^® assay, PermeaPad, in different formats and set-ups, have the potential to reduce and replace in vivo testing to some extent, thus increasing sustainability in drug development. Based on the literature review presented here, we suggest that these assays should be implemented as alternatives to (1) more energy-intense in vitro methods, e.g., refining/replacing cell-based permeability assays, and (2) in vivo studies, e.g., reducing the number of pharmacokinetic studies conducted on animals and humans. For this to happen, a new and modern legislative framework for drug approval is required.

Permeability of New Antifungal Fluconazole Derivatives through a Lipophilic Membrane: Experiment and Modeling

Relationships between the structures of molecules and their properties form the basis of modern chemistry and lay the foundation for structure-based drug design. Being the main two determinants of bioavailability, solubility and permeability of drugs are widely investigated experimentally and predicted from physicochemical parameters and structural descriptors. In the present study, we measure the passive diffusion permeability of a series of new fluconazole derivatives with triazole and thiazolo-pyrimidine moieties connected by different linker bridges through the PermeaPad barrier-a relatively new biomimetic lipophilic membrane that has been increasingly used in recent years. The permeability coefficients of new derivatives are shown to be dependent both on the structure of the linker fragment and on the substituent in the phenyl ring of the thiazolo-pyrimidine moiety. The impact of the compound ionization state on the permeability is revealed. Reliable correlations of the permeability with the antifungal activity and distribution coefficient are found. In addition, the solubility-diffusion approach is shown to be able to successfully predict the permeability of the studied derivatives. The obtained results can be considered another step in the development of permeability databases and design of schemes for in vitro permeability prediction.

Buccal films: A review of therapeutic opportunities, formulations & relevant evaluation approaches

The potential of the mucoadhesive film technology is hard to ignore, owing to perceived superior patient acceptability versus buccal tablets, and significant therapeutic opportunities compared to conventional oral drug delivery systems, especially for those who suffer from dysphagia. In spite of this, current translation from published literature into the commercial marketplace is virtually non-existent, with no authorised mucoadhesive buccal films available in the UK and very few available in the USA. This review seeks to provide an overview of the mucoadhesive buccal film technology and identify key areas upon which to focus scientific efforts to facilitate the wider adoption of this patient-centric dosage form. Several indications and opportunities for development were identified, while discussing the patient-related factors influencing the use of these dosage forms. In addition, an overview of the technologies behind the manufacturing of these films was provided, highlighting manufacturing methods like solvent casting, hot melt extrusion, inkjet printing and three-dimensional printing. Over thirty mucoadhesive polymers were identified as being used in film formulations, with details surrounding their mucoadhesive capabilities as well as their inclusion alongside other key formulation constituents provided. Lastly, the importance of physiologically relevant in vitro evaluation methodologies was emphasised, which seek to improve in vivo correlations, potentially leading to better translation of mucoadhesive buccal films from the literature into the commercial marketplace.

Characterization of Dissolution-Permeation System using Hollow Fiber Membrane Module and Utility to Predict in Vivo Drug Permeation Across BCS Classes

A dissolution-permeation system has potential to provide insight into the kinetic contributions of dissolution and permeation to overall drug absorption. The goals of the study were to characterize a dissolution-hollow fiber membrane (D-HFM) system and compare its resulting in vitro drug permeation constants (K_p^') to in vivo clinical permeation constants (k_p), for four drugs in various Biopharmaceutics Classification System (BCS) classes. Model predictions for D-HFM were made based on derived mixing tank (MT) and complete radial (CRM) flow models and independent measurement of membrane permeability. Experimental D-HFM studies included donor flow rate and donor volume sensitivity studies, and drug permeation profile studies. Additionally, for the four drugs, K_p^'from D-HFM system was compared to (k_p) from literature, as well as K_p^' values from side-by-side diffusion cell and dissolution/Caco-2 system. Results show progressive D-HFM system development as a dissolution-permeation tool. Results indicated that D-HFM models using MT or CRM provided close agreement between predicted and observed drug permeation profiles. Drug permeation in D-HFM system was volume dependent, as predicted. Favorably, more drug permeated through the D-HFM system (10-20% in 60 min) compared to side-by-side diffusion cell (1%) and dissolution/Caco-2 system (0.1%). K_p^' from D-HFM system was also closer to in vivo k_p; the two other in vitro models showed lower K_p^'. Overall, studies reflect that HFM module has potential to incorporate drug permeation into the in vitro assessment of in vivo tablet and capsule performance.

Microfluidic system for immune cell activation and inflammatory cytokine profiling: Application to screening of dietary supplements for anti-inflammatory properties

A versatile and reconfigurable microfluidic chip has been fully in-house fabricated and tested for immune cell culture, activation, and quantification of multi-cytokine secretion. The chip comprises three vertically stacked fluidic layers for perfusion, cell culture and cytokine capture, and quantification, respectively. The perfused media were separated from the cell culture by employing a biomimetic membrane as a model of the intestinal epithelial layer. Time-resolved detection and quantification of several secreted cytokines were enabled by an array of parallel channels, which are interfaced with the cell culture by a porous membrane. Each channel hosts magnetic beads conjugated with a specific antibody against the cytokine of interest. Magnetic bead-assisted agitation enables homogenization of the cell culture supernatant and perfusion of the cytokines through the bottom immune assay channels. As a proof of concept, THP-1 monocytic cells and their induced macrophages were used as a model of immune-responsive cells. The cells were sequentially stimulated by lipopolysaccharides and two dietary supplements, namely, docosahexaenoic acid (DHA) and curcumin, which are known to possess inflammasome-modulating activity. Both DHA and curcumin have shown anti-inflammatory effects by downregulating the secretion of TNFα, IL-6, IL-1β, and IL-10. Treatment of the cells with DHA and curcumin together lowered the TNFα secretion by ∼54%. IL-6 secretion was lowered upon cell treatment with curcumin, DHA, or DHA and curcumin co-treatment by 69%, 78%, or 67%, respectively. IL-1β secretion was lowered by 67% upon curcumin treatment and 70% upon curcumin and DHA co-treatment. IL-10 secretion was also lowered upon treating the cells with DHA, curcumin, or DHA and curcumin together by 7%, 53%, or 54%, respectively. The limit of the detection of the assay was determined as 25 pg/ml. Four cytokine profiling was demonstrated, but the design of the chip can be improved to allow a larger number of cytokines to be simultaneously detected from the same set of cells.

Clinical pharmacokinetics of nadolol: A systematic review

WHAT IS KNOWN AND OBJECTIVE

Nadolol is a non-selective beta-adrenergic antagonist that is used for the treatment of hypertension and angina. The primary route for its administration is oral. It is given once daily as it has a longer half-life (t½). The purpose of conducting this systematic review is to provide a comprehensive view of all the available pharmacokinetic (PK) data on nadolol in humans. This review aimed to systematically collate and analyze publish data on the clinical PK of nadolol in humans and this can be beneficial for the clinicians in dosage adjustments.

METHODS

Two electronic databases PubMed and Google Scholar were used for conducting a systematic literature search. All the relevant articles containing PK data of nadolol in humans were retrieved. A total of 1275 articles were searched from both databases and after applying eligibility criteria finally, 22 articles were included for conducting the systematic review.

RESULTS AND DISCUSSION

The area under the plasma concentration curve (AUC) and maximum plasma concentration (C_max ) of nadolol increased in a dose-dependent manner. The t½ of nadolol was increased to double (18.2-68.6 h) in the patients with chronic kidney disease while the serum t½ became shorter (3.2-4.3 h) when administered to the children. The bioavailability of nadolol was greatly reduced by the coadministration of green tea. Nadolol can be effectively removed by hemodialysis. It undergoes enterohepatic circulation thus activated charcoal decreased its bioavailability.

WHAT IS NEW AND CONCLUSION

Since, there is no previous report of a systematic review on the PK of nadolol, the current review encompasses all the relevant published articles on nadolol in humans. The analysis and understanding of PK parameters (AUC, C_max , and t½) of nadolol may be helpful in the development and evaluation of PK models.

Tailoring functional spray-dried powder platform for efficient donepezil nose-to-brain delivery

Shortcomings of oral donepezil administration in the treatment of Alzheimer's disease have paved the way for ongoing investigations towards more efficient and safe donepezil nose-to-brain delivery. Herein we present the development of advantageous powder platform for donepezil nose-to-brain delivery, coupling careful design of chitosan and mannitol-based carrier matrix with spray-drying technology advantages and early consideration of adequate nasal administration mode, employing QbD approach. Unprecedentedly, ultrasonic nozzle was used to atomise the drying feed in response to size-related requirements for nasal aerosol particles. The optimised spray-drying process resulted in free-flowable dry powder with a great majority of particles larger than 10 µm, ensuring localised nasal deposition upon aerosolization, as evidenced by using 3D-printed nasal cavity model. QbD approach coupling formulation, process and administration parameters enabled optimisation of drug deposition profile reaching tremendously high 65.5 % of the applied dose deposited in the olfactory region. The leading formulation exhibited favourable swelling, mucoadhesion, drug release and permeation-enhancing properties, suiting the needs for efficient brain-targeted delivery. Results of in vitro biocompatibility and physico-chemical stability studies confirmed the leading formulation potential for safe and efficient donepezil nose-to-brain delivery. The obtained results encourage extending the study to an appropriate in vivo model needed for the final proof-of-concept.

Cyclodextrins and drug membrane permeation: Thermodynamic considerations

Cyclodextrins are hydrophilic oligosaccharides that can increase aqueous solubility of lipophilic drugs through formation of water-soluble drug/cyclodextrin complexes. Although the complexes are hydrophilic, and as such do not permeate biological membranes, the complexes are known to enhance drug permeation through lipophilic membranes and improve drug bioavailability after, for example, oral administration. However, it is not clear how cyclodextrins enhance the permeation. An artificial biomembrane (PermeaPad®) was used to study the effect of donor medium composition on drug permeation. It was observed that in aqueous solutions the hydrophilic cyclodextrins behave not like disperse systems but rather like organic cosolvents such as ethanol, increasing the solubility without having significant effect on the molecular mobility and ability of lipophilic drug molecules to partition into the lipophilic membrane. Also, that partition of dissolved drug molecules from the aqueous exterior into the membrane is at its maximum when their thermodynamic activity is at its maximum. In other words, that drug flux from aqueous cyclodextrin solutions through lipophilic membranes depends on both the concentration and the thermodynamic activity of dissolved drug. Maximum flux is obtained when both the drug concentration and thermodynamic activity of the dissolved drug molecules are at their maximum value.

Chiral Recognition R- and RS- of New Antifungal: Complexation/Solubilization/Dissolution Thermodynamics and Permeability Assay

Novel potential antifungal of 1,2,4-triazole class have been synthesized as pure enantiomer (R-98) and racemic (RS-186). The effect of 2-hydroxypropyl-β-cyclodextrin (CD) on the solubility and permeability of RS-186 and R-98 in terms of chiral recognition was investigated. Phase solubility studies were carried out at 4 temperatures in 0-0.05 M CD concentration range for pH 2.0 and pH 7.4. AL- and AL--type phase-solubility profiles were obtained for both compounds in pH 2.0 and pH 7.4. The racemic formed more stable complexes with CD as compared to R-isomer. Disclosing of chiral discrimination was facilitated using the approach based on the complex consideration of the derived complexation/solubilization/inherent dissolution thermodynamic functions, including the differential parameters between the racemic compound and R-enantiomer. The differences in the thermodynamic parameters determined by the chirality were discussed in terms of the driving forces of the processes and the main interactions of the compounds with CD in solution. The membrane permeability of both samples in the presence of CD was accessed in order to evaluate the specificity of enantioselective transport through the lipophilic membrane. The solubility/permeability interrelation was disclosed. The investigated compounds were classified as medium permeable in pure buffers and low permeable in the presence of 0.01 M CD. The obtained results can be useful for the design of pharmaceutical products in the form of liquid formulations based on the investigated substances.

Permeability of the Perindopril Arginine under In Vitro Conditions across Caco-2 Monolayer and Biomimetic Phospholipid Membrane

Perindopril arginine (PA) as an angiotensin-converting enzyme (ACE) inhibitor is widely used in cardiovascular diseases, especially in systemic hypertension and heart failure. Although the pharmacokinetics of PA are well documented, there is no available detailed data on its permeation in in vitro conditions. The present study aimed to assess the transport of PA across both biological membranes and artificial biomimetic ones. For the determination of PA transport, the Caco-2 cell line was selected as a reliable in vitro model of gastrointestinal biological barriers. Additionally, a novel 96-well plate with phospholipid membrane PermeaPad was used to evaluate the transport of PA by passive diffusion. We confirmed that PA is relatively poorly permeable across the Caco-2 monolayer. The permeability results obtained from the non-cell-based model demonstrated higher transport of PA as compared to that of Caco-2. Thus, PA transport across the biological membranes might be suggested to be regulated by the membrane transporters.

Modulation of Paracellular-like Drug Transport across an Artificial Biomimetic Barrier by Osmotic Stress-Induced Liposome Shrinking

Various types of artificial biomimetic barriers are widely utilized as in vitro tools to predict the passive “transcellular” transport of drug compounds. The current study investigated if the sandwich barrier PermeaPad^®, which is composed of tightly packed phospholipid vesicles enclosed between two support sheets, contributes to a transport mechanism that is paracellular-like, representing one of the alternative pathways of passive transport in vivo, primarily of relevance for hydrophilic drug compounds. To this end, we pretreated the commercial PermeaPad^® barrier with NaCl solutions of either high or low osmolality prior to permeation experiments on reversed Franz cell setups with hydrophilic model compounds calcein and acyclovir and hydrophobic model compounds hydrocortisone and celecoxib. Our starting hypothesis was that the liposomes formed in the barrier during the hydration step should either shrink or swell upon contact with test media (drug solutions) due to osmotic pressure difference as compared to the pretreatment solutions. Apparent permeabilities for calcein and acyclovir across the PermeaPad^® barrier were found to increase approximately 2.0 and 1.7 fold, respectively, upon hypo-osmotic pretreatment (soaking in hypotonic medium, while the permeation of hydrocortisone and celecoxib remained unchanged. A control experiment with lipid-free barriers (support sheets) indicated that the permeation of all the compounds was virtually unchanged upon hypo-osmotic pretreatment. In conclusion, soaking PermeaPad^® in a medium of lower osmotic pressure than that used during the permeation study appears to induce the osmotic shrinking of the lipid vesicles in the barrier, leaving wider water channels between the vesicles and, thus, allowing hydrophilic compounds to pass the barrier in a paracellular-like manner.

Physicochemical Profile of Antiandrogen Drug Bicalutamide: Solubility, Distribution, Permeability

The pharmacologically relevant physicochemical properties of the antiandrogen drug bicalutamide (BCL) have been determined for the first time. Solubility in aqueous solution, 1-octanol, n-hexane, and ethanol was measured by the shake flask method in the temperature range of 293.15−313.15 K. The compound was shown to be poorly soluble in aqueous medium and n-hexane; at the same time, an essentially higher solubility in the alcohols was revealed. The following order of molar solubility was determined: ethanol > 1-octanol > water ≈ n-hexane. The solubility was correlated with the Van’t Hoff and Apelblat equations. Evaluation of the Hansen solubility parameters and the atomic group contribution approach of Hoftyzer and Van Krevelen demonstrated consistency with the experimental data and good potential adsorption of bicalutamide. The temperature dependences of the distribution coefficients in the 1-octanol/water and n-hexane/water two-phase systems were measured and discussed in the framework of the thermodynamic approach. The ∆logD parameter determined from the distribution experiment clearly demonstrated the preference of the lipophilic delivery pathways for the compound in the biological media. The overall thermodynamic analysis based on the solubility and distribution results of the present study and the sublimation characteristics published previously has been performed. To this end, the thermodynamic parameters of the dissolution, solvation, and transfer processes were calculated and discussed in view of the solute-solvent interactions. The permeation rate of BCL through the PermeaPad barrier was measured and compared with PAMPA permeability.

Human Lactobacillus Biosurfactants as Natural Excipients for Nasal drug Delivery of Hydrocortisone

The inclusion of a chemical permeation enhancer in a dosage form is considered an effective approach to improve absorption across the nasal mucosa. Herein we evaluated the possibility of exploiting biosurfactants (BS) produced by Lactobacillus gasseri BC9 as innovative natural excipients to improve nasal delivery of hydrocortisone (HC). BC9-BS ability to improve HC solubility and the BS mucoadhesive potential were investigated using the surfactant at a concentration below and above the critical micelle concentration (CMC). In vitro diffusion studies through the biomimetic membrane PermeaPad® and the same synthetic barrier functionalized with a mucin layer were assessed to determine BC9-BS absorption enhancing properties in the absence and presence of the mucus layer. Lastly, the diffusion study was performed across the sheep nasal mucosa using BC9-BS at a concentration below the CMC. Results showed that BC9-BS was able to interact with the main component of the nasal mucosa, and that it allowed for a greater solubilization and also permeation of the drug when it was employed at a low concentration. Overall, it seems that BC9-BS could be a promising alternative to chemical surfactants in the nasal drug delivery field.

Best practices in current models mimicking drug permeability in the gastrointestinal tract - an UNGAP review

The absorption of orally administered drug products is a complex, dynamic process, dependent on a range of biopharmaceutical properties; notably the aqueous solubility of a molecule, stability within the gastrointestinal tract (GIT) and permeability. From a regulatory perspective, the concept of high intestinal permeability is intrinsically linked to the fraction of the oral dose absorbed. The relationship between permeability and the extent of absorption means that experimental models of permeability have regularly been used as a surrogate measure to estimate the fraction absorbed. Accurate assessment of a molecule's intestinal permeability is of critical importance during the pharmaceutical development process of oral drug products, and the current review provides a critique of in vivo, in vitro and ex vivo approaches. The usefulness of in silico models to predict drug permeability is also discussed and an overview of solvent systems used in permeability assessments is provided. Studies of drug absorption in humans are an indirect indicator of intestinal permeability, but in vitro and ex vivo tools provide initial screening approaches are important tools for direct assessment of permeability in drug development. Continued refinement of the accuracy of in silico approaches and their validation with human in vivo data will facilitate more efficient characterisation of permeability earlier in the drug development process and will provide useful inputs for integrated, end-to-end absorption modelling.

Protocol for the Isolation of Stratum Corneum from Pig Ear Skin: Evaluation of the Trypsin Digestion Conditions

Stratum corneum (SC) represents the outermost layer of the skin, being an effective barrier against the entry of molecules and pathogens. Skin research has given particular focus to SC as it hampers effective drug delivery for cosmetical and therapeutical purposes. Following recommendations to develop alternative models to animals, the SC isolated from skin obtained from medical procedures or from pigs has gained extensive attention. Yet, there is still missing a standard and simple procedure accepted within the scientific community to avoid application of different isolated SC methodologies, a fact that may hamper progress in skin research. Considering this challenge, the present study evaluated different experimental conditions aiming to establish a useful and sustainable solvent-free procedure for the obtention of a realistic SC model. The studied trypsin digestion parameters included concentration, incubation period and temperature. Isolated SC was characterized using histological analysis and calcein’s permeability, after the procedure and during a 6-week storage period. Data recommend trypsin digestion at 4 °C for 20 h as the most effective procedure to isolate SC from pig ear skin. This work contributes to standardize the SC isolation procedure, and to obtain a valuable and reliable SC mimetic model for skin drug development.

New Antifungal Compound: Impact of Cosolvency, Micellization and Complexation on Solubility and Permeability Processes

Poor solubility of new antifungal of 1,2,4-triazole class (S-119)—a structural analogue of fluconazole in aqueous media was estimated. The solubility improvement using different excipients: biopolymers (PEGs, PVP), surfactants (Brij S20, pluronic F-127) and cyclodextrins (α-CD, β-CD, 2-HP-β-CD, 6-O-Maltosyl-β-CD) was assessed in buffer solutions pH 2.0 and pH 7.4. Additionally, 2-HP-β-CD and 6-O-Maltosyl-β-CD were proposed as promising solubilizers for S-119. According to the solubilization capacity and micelle/water partition coefficients in buffer pH 7.4 pluronic F-127 was shown to improve S-119 solubility better than Brij S20. Among biopolymers, the greatest increase in solubility was shown in PVP solutions (pH 7.4) at concentrations above 4 w/v%. Complex analysis of the driving forces of solubilization, micellization and complexation processes matched the solubility results and suggested pluronic F-127 and 6-O-Maltosyl-β-CD as the most effective solubilizing agents for S-119. The comparison of S-119 diffusion through the cellulose membrane and lipophilic PermeaPad barrier revealed a considerable effect of the lipid layer on the decrease in the permeability coefficient. According to the PermeaPad, S-119 was classified as a highly permeated substance. The addition of 1.5 w/v% CDs in donor solution moves it to low-medium permeability class.

Towards a better mechanistic comprehension of drug permeation and absorption: Introducing the diffusion-partitioning interplay

The process of passive drug absorption from the gastrointestinal tract is still poorly understood and modelled. Additionally, the rapidly evolving field of pharmaceutics demands efficient, affordable and reliable in vitro tools for predicting in vivo performance. In this work, we combined established methods for quantifying drug diffusivity (localized UV-spectroscopy) and permeability (Permeapad® plate) in order to gain a better understanding of the role of unstirred water layers (UWLs) in drug absorption. The effect of diffusion/permeability media composition and viscosity on the apparent permeation resistance (R_app) of model drugs caffeine (CAF) and hydrocortisone (HC) were tested and evaluated by varying the type and concentration of viscosity-enhancing agent - glycerol or a poly(ethylene glycol) (PEG) with different average molecular weights. For all types of media, increased viscosity lead to reduction in diffusivity but could not alone explain the observed effect, which was attributed to intermolecular polymer-drug interactions. Additionally, for both drugs, smaller hydrophilic viscosity-enhancing agents (glycerol and PEG 400) had larger influence than larger ones (PEG 3350 and 6000). The results highlighted the role of UWL as an additive barrier to permeation and indicated that diffusion through UWL is the rate-limiting step to CAF's permeation, whilst HC permeability is a partition-driven process.

An overview of in vitro, ex vivo and in vivo models for studying the transport of drugs across intestinal barriers

Oral administration is the most commonly used route for drug delivery owing to its cost-effectiveness, ease of administration, and high patient compliance. However, the absorption of orally delivered compounds is a complex process that greatly depends on the interplay between the characteristics of the drug/formulation and the gastrointestinal tract. In this contribution, we review the different preclinical models (in vitro, ex vivo and in vivo) from their development to application for studying the transport of drugs across intestinal barriers. This review also discusses the advantages and disadvantages of each model. Furthermore, the authors have reviewed the selection and validation of these models and how the limitations of the models can be addressed in future investigations. The correlation and predictability of the intestinal transport data from the preclinical models and human data are also explored. With the increasing popularity and prevalence of orally delivered drugs/formulations, sophisticated preclinical models with higher predictive capacity for absorption of oral formulations used in clinical studies will be needed.

A Mechanistic Study of Drug Mass Transport from Supersaturated Solutions Across PAMPA Membranes

There is an increasing shift from dissolution testing to dissolution-permeation testing of formulations during formulation development and this has led increasing application of permeability measurements using parallel artificial membrane permeability assay (PAMPA) membranes. However, there is a lack of thorough analysis of the impact of variabilities in the PAMPA setup on the mass flow rate outcomes, particularly for complex solubility-enabling formulations. In this study, we investigated the impact of amorphous drug-rich nanodroplets, formed in supersaturated solutions by liquid-liquid phase separation, on membrane transport by measuring mass flow rate across PAMPA membranes. In addition, we explored the impact of PAMPA variants such as lipid composition, hydrophobicity and pore size of the filter support, as well as receiver sink properties on membrane mass flow rates of solutions containing amorphous nanodroplets. Filter properties and lipid composition did not show a notable influence on the mass flow rates for lipophilic molecules, while a marked impact was observed for hydrophilic molecules. High sink conditions in the receiver compartment, arising from addition of micellar surfactant, altered the membrane integrity for lipid-impregnated hydrophilic membranes. In contrast, no such effect was observed for a hydrophobic filter support. Membrane integrity tests also suggested that monitoring water transport may be an improved approach over using Lucifer yellow. Furthermore, high sink conditions in the receiver compartment resulted in an increase in the overall mass flow rate. This was due to the effect of asymmetric conditions, generated across the membrane, on mass transport kinetics. Linearity between mass flow rate and donor concentration was observed until the donor concentration reached the amorphous solubility. Above the amorphous solubility, a gradual increase in mass flow rate was observed i.e., with an increasing number of nanodroplets in the solution. This was attributed to decrease in the permeability barrier across unstirred water layer due to reduction of the concentration gradient as nanodroplets dissolved to replenish absorbed drug. Observations made in this study provide insights into the mechanisms associated with mass transport of supersaturated solutions across PAMPA membranes, which are critical for improved evaluation of enabling formulations.

In vitro models replicating the human intestinal epithelium for absorption and metabolism studies: A systematic review

Absorption, distribution, metabolism and excretion (ADME) studies represent a fundamental step in the early stages of drug discovery. In particular, the absorption of orally administered drugs, which occurs at the intestinal level, has gained attention since poor oral bioavailability often led to failures for new drug approval. In this context, several in vitro preclinical models have been recently developed and optimized to better resemble human physiology in the lab and serve as an animal alternative to accomplish the 3Rs principles. However, numerous models are ineffective in recapitulating the key features of the human small intestine epithelium and lack of prediction potential for drug absorption and metabolism during the preclinical stage. In this review, we provide an overview of in vitro models aimed at mimicking the intestinal barrier for pharmaceutical screening. After briefly describing how the human small intestine works, we present i) conventional 2D synthetic and cell-based systems, ii) 3D models replicating the main features of the intestinal architecture, iii) micro-physiological systems (MPSs) reproducing the dynamic stimuli to which cells are exposed in the native microenvironment. In this review, we will highlight the benefits and drawbacks of the leading intestinal models used for drug absorption and metabolism studies.

Exploring the transmucosal permeability of cyclobenzaprine: A comparative preformulation by standardized and controlled ex vivo and in vitro permeation studies

As part of early drug development, preformulation studies are used to comprehensively explore the properties of new drugs. In particular, this includes the biopharmaceutical characterization and evaluation of impacting factors (e.g. excipients, microenvironmental conditions etc.) by permeation studies. To overcome the limitations of current studies, a novel standardized ex vivo procedure using esophageal mucosa as surrogate has been established successfully and applied to preformulation studies for oromucosal delivery of cyclobenzaprine hydrochloride, a tricyclic muscle relaxant with potential for psychopharmacotherapeutic use. By using the standardized ex vivo permeation process, a twofold enhancement of permeability (0.98 ± 0.16 to 1.96 ± 0.10 * 10^-5 cm/s) was observed by adjustment and controlling of microenvironmental pH, empowering a targeted and effective development of sublingual formulations. Predictivity and suitability were superior compared to in vitro experiments using artificial biomimetic membranes, revealing a determination coefficient (R²) of 0.995 vs. 0.322 concerning pH-dependent permeability of cyclobenzaprine. In addition, diffusion properties were extensively examined (e.g. influence of mucosal thicknesses, tissue freezing etc.). The alignment of the study design regarding physiologically/clinically relevant conditions resulted in ex vivo data that allowed for the estimation of plasma AUC levels in the extend of reported in vivo ranges.

Estimating the Oral Absorption from Self-Nanoemulsifying Drug Delivery Systems Using an In Vitro Lipolysis-Permeation Method

The aim of this study was to design an in vitro lipolysis-permeation method to estimate drug absorption following the oral administration of self-nanoemulsifying drug delivery systems (SNEDDSs). The method was evaluated by testing five oral formulations containing cinnarizine (four SNEDDSs and one aqueous suspension) from a previously published pharmacokinetic study in rats. In that study, the pharmacokinetic profiles of the five formulations did not correlate with the drug solubilization profiles obtained during in vitro intestinal lipolysis. Using the designed lipolysis-permeation method, in vitro lipolysis of the five formulations was followed by in vitro drug permeation in Franz diffusion cells equipped with PermeaPad^® barriers. A linear in vivo–in vitro correlation was obtained when comparing the area under the in vitro drug permeation–time curve (AUC_0–3h), to the AUC_0–3h of the plasma concentration–time profile obtained from the in vivo study. Based on these results, the evaluated lipolysis-permeation method was found to be a promising tool for estimating the in vivo performance of SNEDDSs, but more studies are needed to evaluate the method further.

Improvement of pharmacologically relevant properties of methotrexate by solid dispersion with Pluronic F127

Solid dispersion with Pluronic F127 was proposed as alternative approach to modify the pharmacologically relevant properties of methotrexate (MTX). Solid dispersion of MTX with Pluronic F127 was prepared by fusion method and characterized by powder X-ray diffraction, thermal analysis, scanning electron microscopy and FTIR spectroscopy with the aim to elucidate the physical state of the dispersed MTX and the nature of the interactions occurring between MTX and the carrier. Effect of Pluronic F127 on solubility, dissolution rate, membrane permeability, and pharmacokinetic parameters was revealed in vitro and in vivo. It was found that physical interactions of MTX with Pluronic F127 are predominant in the solid dispersion. The effect of Pluronic F127 on the MTX solubility and release rate of MTX from the solid dispersion is pH dependent. Apparent solubility of MTX released from the solid dispersion is increased in the acidic medium and remains unchanged in the alkaline medium. In comparison with the pristine MTX, the release of MTX from the solid dispersion is faster in the acidic medium and slower in the alkaline medium. Influence of Pluronic F127 on the membrane permeability of MTX is insignificant. Bioavailability of orally administrated solid dispersion in increased. Results from in vitro and in vivo studies suggested that the pharmacokinetic properties of MTX can be improved by solid dispersion with Pluronic F127.