Effect of food intake and co-administration of placebo self-nanoemulsifying drug delivery systems on the absorption of cinnarizine in healthy human volunteers

Tabletized Nanomedicine: From the Current Scenario to Developing Future Medicine

The limitations of conventional therapeutic treatments prevailed in the development of nanotechnology-based medical formulations, termed nanomedicine. Nanomedicine is an advanced medicine that often consists of therapeutic agent(s) embedded in biodegradable or biocompatible nanomaterial-based formulations. Among nanomedicine approaches, tablet (oral) nanomedicine is still under development. In tabletized nanomedicine, the dynamic interplay between nanoformulations and the intricate milieu of the gastrointestinal tract simulates a pivotal role, particularly accentuating the influence exerted upon the luminal, mucosal, and epithelial cells. In this work, we document the perspectives and opportunities of nanoformulations toward the development of tabletized nanomedicine. This review also unveils the notion of integrating nanomedicine within a tablet formulation, which facilitates the controlled release of drugs, biomolecules, and agent(s) from the formulation to achieve a better therapeutic response. Finally, an attempt was made to explore current trends in nanomedicine technology such as bacteriophage, probiotic, and oligonucleotide tabletized nanomedicine and the combination of nanomedicine with imaging agents, i.e., nanotheranostics.

Fast-Fed Variability: Insights into Drug Delivery, Molecular Manifestations, and Regulatory Aspects

Among various drug administration routes, oral drug delivery is preferred and is considered patient-friendly; hence, most of the marketed drugs are available as conventional tablets or capsules. In such cases, the administration of drugs with or without food has tremendous importance on the bioavailability of the drugs. The presence of food may increase (positive effect) or decrease (negative effect) the bioavailability of the drug. Such a positive or negative effect is undesirable since it makes dosage estimation difficult in several diseases. This may lead to an increased propensity for adverse effects of drugs when a positive food effect is perceived. However, a negative food effect may lead to therapeutic insufficiency for patients suffering from life-threatening disorders. This review emphasizes the causes of food effects, formulation strategies to overcome the fast-fed variability, and the regulatory aspects of drugs with food effects, which may open new avenues for researchers to design products that may help to eliminate fast-fed variability.

Lipid-based solubilization technology via hot melt extrusion: promises and challenges

INTRODUCTION

Self-emulsifying drug delivery systems (SEDDS) are a promising strategy to improve the oral bioavailability of poorly water-soluble drugs (PWSD). The excipients of SEDDS enable permeation through the mucus and gastro-intestinal barrier, inhibiting efflux transporters (e.g. P-glycoprotein) of drugs. Poor drug loading capacity and formulation instability are the main setbacks of traditional SEDDS. The use of polymeric precipitation inhibitors was shown to create supersaturable SEDDS with increased drug payload, and their solidification can help to overcome the instability challenge. As an alternative to several existing SEDDS solidification technologies, hot melt extrusion (HME) holds the potential for lean and continuous manufacturing of supersaturable solid-SEDDS. Despite being ubiquitously applied in solid lipid and polymeric processing, HME has not yet been widely considered for the preparation of SEDDS.

AREAS COVERED

The review begins with the rationale why SEDDS as the preferred lipid-based delivery systems (LBDS) is suitable for the oral delivery of PWSD and discusses the common barriers to oral administration. The potential of LBDS to surmount them is discussed. SEDDS as the flagship of LBDS for PWSD is proposed with a special emphasis on solid-SEDDS. Finally, the opportunities and challenges of HME from the lipid-based excipient (LBE) processing and product performance standpoint are highlighted.

EXPERT OPINION

HME can be a continuous, solvent-free, cost-effective, and scalable technology for manufacturing solid supersaturable SEDDS. Several critical formulations and process parameters in successfully preparing SEDDS via HME are identified.

Comparison of a single pharmaceutical surfactant versus intestinal biorelevant media for etravirine dissolution: Role and impact of micelle diffusivity

Etravirine is an antiviral whose oral absorption is limited by low solubility/dissolution. The objective was to predict and compare etravirine's surfactant-mediated dissolution into polyoxyethylene-10 lauryl ether (POE) and FeSSIF-V2, including the contribution of slow micelle diffusivity. Dynamic light scattering (DLS) was used to measure the size and diffusivity values of drug-loaded micelles. In vitro intrinsic dissolution into surfactant media were predicted using a model for surfactant-mediated dissolution. Compared to maleic buffer, POE and FeSSIF-V2 increased etravirine solubility 232-fold and 8.97-fold, respectively. From DLS, micelle diffusivity of drug-loaded POE micelle and FeSSIF-V2 mixed-micelle was 5.15x10^-7 cm²/s and 5.76x10^-8 cm²/s, respectively. Observed and predicted dissolution enhancement into POE were 50.7 and 31.3, and 1.26 and 1.24 into FeSSIF-V2, respectively. Hence, there was high dissolution enhancement into POE, although the observed enhancement was only 21.9% of the observed solubility enhancement, reflecting the attenuating impact of the large and slowly diffusing drug-loaded POE micelles. Meanwhile, there was minimal dissolution enhancement into FeSSIF-V2, and the observed enhancement was only 14.0% of the observed solubility enhancement, reflecting the even slower diffusing drug-loaded FeSSIF-V2 mixed-micelles compared to drug-loaded POE micelles. Results are considered in light of designing a single pharmaceutical surfactant system for dissolution that mimics a FeSSIF-V2 system.

Bio-enabling strategies to mitigate the pharmaceutical food effect: a mini review

The concomitant administration of oral drugs with food can result in significant changes in bioavailability, leading to variable pharmacokinetics and considerable clinical implications, such as over- or under-dosing. Consequently, there is increasing demand for bio-enabling formulation strategies to reduce variability in exposure between the fasted and fed state and/or mitigate the pharmaceutical food effect. The current review critically evaluates technologies that have been implemented to overcome the positive food effects of pharmaceutical drugs, including, lipid-based formulations, nanosized drug preparations, cyclodextrins, amorphisation and solid dispersions, prodrugs and salts. Additionally, improved insight into preclinical models for predicting the food effect is provided. Despite the wealth of research, this review demonstrates that application of optimal formulation strategies to mitigate the positive food effects and the evaluation in preclinical models is not a universal approach, and improved standardisation of models to predict the food effects would be desirable. Ultimately, the successful reformulation of specific drugs to eliminate the food effect provides a panoply of advantages for patients with regard to clinical efficacy and compliance.

Structured edible lipid-based particle systems for oral drug-delivery

Oral administration is the most popular and patient-compliant route for drug delivery, though it raises great challenges due to the involvement of the gastro-intestine (GI) system and the drug bioavailability. Drug bioavailability is directly related to its ability to dissolve, transport and/or absorb through the physiological environment. A great number of drugs are characterized with low water solubility due to their hydrophobic nature, thus limiting their oral bioavailability and clinical use. Therefore, new strategies aiming to provide a protective shell through the GI system and improve drug solubility and permeability in the intestine were developed to overcome this limitation. Lipid-based systems have been proposed as good candidates for such a task owing to their hydrophobic nature which allows high drug loading, drug micellization ability during intestinal digestion due to the lipid content, and the vehicle physical protective environment. The use of edible lipids with high biocompatibility paves the bench-to-bedside translation. Four main types of structured lipid-based drug delivery systems differing in the physical state of the lipid phase have been described in the literature, namely emulsions, solid lipid nanoparticles, nanostructured lipid carriers, and oleogel-based particles. The current review provides a comprehensive overview of the different structured edible lipid-based oral delivery systems investigated up to date and emphasizes the contribution of each system component to the delivery performance, and the oral delivery path of lipids.

Exploring porcine gastric and intestinal fluids using microscopic and solubility estimates: Impact of placebo self-emulsifying drug delivery system administration to inform bio-predictive in vitro tools

Validation and characterisation of in vitro and pre-clinical animal models to support bio-enabling formulation development is of paramount importance. In this work, post-mortem gastric and small intestinal fluids were collected in the fasted, fed state and at five sample-points post administration of a placebo Self-Emulsifying Drug Delivery System (SEDDS) in the fasted state to pigs. Cryo-TEM and Negative Stain-TEM were used for ultrastructure characterisation. Ex vivo solubility of fenofibrate was determined in the fasted-state, fed-state and post-SEDDS administration. Highest observed ex vivo drug solubility in intestinal fluids after SEDDS administration was used for optimising the biorelevant in vitro conditions to determine maximum solubility. Under microscopic evaluation, fasted, fed and SEDDS fluids resulted in different colloidal structures. Drug solubility appeared highest 1 hour post SEDDS administration, corresponding with presence of SEDDS lipid droplets. A 1:200 dispersion of SEDDS in biorelevant media matched the highest observed ex vivo solubility upon SEDDS administration. Overall, impacts of this study include increasing evidence for the pig preclinical model to mimic drug solubility in humans, observations that SEDDS administration may poorly mimic colloidal structures observed under fed state, while microscopic and solubility porcine assessments provided a framework for increasingly bio-predictive in vitro tools.

Current challenges and future perspectives in oral absorption research: An opinion of the UNGAP network

Although oral drug delivery is the preferred administration route and has been used for centuries, modern drug discovery and development pipelines challenge conventional formulation approaches and highlight the insufficient mechanistic understanding of processes critical to oral drug absorption. This review presents the opinion of UNGAP scientists on four key themes across the oral absorption landscape: (1) specific patient populations, (2) regional differences in the gastrointestinal tract, (3) advanced formulations and (4) food-drug interactions. The differences of oral absorption in pediatric and geriatric populations, the specific issues in colonic absorption, the formulation approaches for poorly water-soluble (small molecules) and poorly permeable (peptides, RNA etc.) drugs, as well as the vast realm of food effects, are some of the topics discussed in detail. The identified controversies and gaps in the current understanding of gastrointestinal absorption-related processes are used to create a roadmap for the future of oral drug absorption research.

Toward simplified oral lipid-based drug delivery using mono-/di-glycerides as single component excipients

OBJECTIVE

This study aimed to systematically explore compositional effects for a series of lipid systems, on the in vitro drug solubilization and in vivo bioavailability of three poorly water-soluble drugs with different physico-chemical properties.

SIGNIFICANCE

While many lipid-based drug products have successfully reached the market, there is still a level of uncertainty on the design guidelines for such drug products with limited understanding on the influence of composition on in vitro and in vivo performance.

METHODS AND RESULTS

Lipid-based drug delivery systems were prepared using either single excipient systems based on partially digested triglycerides (i.e. mono- and/or di-glycerides) or increasingly complex systems by incorporating surfactants and/or triglycerides. These lipid systems were evaluated for both in vitro and in vivo behavior. Results indicated that simple single component long chain lipid systems are more beneficial for the absorption of the weak acid celecoxib and the weak base cinnarizine compared to equivalent single component medium chain lipid systems. Similarly, a two-component system produced by incorporating small amount of hydrophilic surfactant yields similar overall pharmacokinetic effects. The lipid drug delivery systems based on medium chain lipid excipients improved the in vivo exposure of the neutral drug JNJ-2A. The higher in vivo bioavailability of long chain lipid systems compared to medium chain lipid systems was in agreement with in vitro dilution and dispersion studies for celecoxib and cinnarizine.

CONCLUSIONS

The present study demonstrated the benefits of using mono-/di-glycerides as single component excipients in LBDDS to streamline formulation screening and improve oral bioavailability for the three tested poorly water-soluble drugs.

Chase Dosing of Lipid Formulations to Enhance Oral Bioavailability of Nilotinib in Rats

PURPOSE

Lipid-based formulations (LBF) have shown oral bioavailability enhancement of lipophilic drugs, but not necessarily in the case of hydrophobic drugs. This study explored the potential of lipid vehicles to improve the bioavailability of the hydrophobic drug nilotinib comparing a chase dosing approach and lipid suspensions.

METHODS

Nilotinib in vivo bioavailability in rats was determined after administering an aqueous suspension chase dosed with blank olive oil, Captex 1000, Peceol or Capmul MCM, respectively. Absolute bioavailability was determined (relative to an intravenous formulation). Pharmacokinetic parameters were compared to lipid suspensions.

RESULTS

Compared to the lipid suspensions, the chase dosed lipids showed a 2- to 7-fold higher bioavailability. Both long chain chase dosed excipients also significantly increased the bioavailability up to 2-fold compared to the aqueous suspension. Deconvolution of the pharmacokinetic data indicated that chase dosing of nilotinib resulted in prolonged absorption compared to the aqueous suspension.

CONCLUSION

Chase dosed LBF enhanced the in vivo bioavailability of nilotinib. Long chain lipids showed superior performance compared to medium chain lipids. Chase dosing appeared to prolong the absorption phase of the drug. Therefore, chase dosing of LBF is favourable compared to lipid suspensions for 'brick dust' molecules such as nilotinib. Graphical Abstract The potential of bio-enabling lipid vehicles, administered via chase dosing and lipid suspensions, has been evaluated as an approach to enhance oral bioavailability of nilotinib.

Intrinsic Dissolution Rate Profiling of Poorly Water-Soluble Compounds in Biorelevant Dissolution Media

The intrinsic dissolution rate (IDR) of active pharmaceutical ingredients (API) is a key property that aids in early drug development, especially selecting formulation strategies to improve dissolution and thereby drug absorption in the intestine. Here, we developed a robust method for rapid, medium throughput screening of IDR and established the largest IDR dataset in open literature to date that can be used for pharmaceutical computational modeling. Eighteen compounds with diverse physicochemical properties were studied in both fasted and fed state simulated intestinal fluids. Dissolution profiles were measured in small-scale experimental assays using compound suspensions or discs. IDR measurements were not solely linked to API solubility in either dissolution media. Multivariate data analysis revealed that IDR strongly depends on compound partitioning into bile salt and phospholipid micelles in the simulated intestinal fluids, a process that in turn is governed by API lipophilicity, hydrophobicity, and ionization.

Effect of lipids on absorption of carvedilol in dogs: Is coadministration of lipids as efficient as a lipid-based formulation?

Lipid-based formulations (LBFs) is a formulation strategy for enabling oral delivery of poorly water-soluble drugs. However, current use of this strategy is limited to a few percent of the marketed products. Reasons for that are linked to the complexity of LBFs, chemical instability of pre-dissolved drug and a limited understanding of the influence of LBF intestinal digestion on drug absorption. The aim of this study was to explore intestinal drug solubilization from a long-chain LBF, and evaluate whether coadministration of LBF is as efficient as a lipid-based drug formulation containing the pre-dissolved model drug carvedilol. Thus, solubility studies of this weak base were performed in simulated intestinal fluid (SIF) and aspirated dog intestinal fluid (DIF). DIF was collected from duodenal stomas after dosing of water and two levels (1 g and 2 g) of LBF. Similarly, the in vitro SIF solubility studies were conducted prior to, and after addition of, undigested or digested LBF. The DIF fluid was further characterized for lipid digestion products (free fatty acids) and bile salts. Subsequently, carvedilol was orally administered to dogs in a lipid-based drug formulation and coadministered with LBF, and drug plasma exposure was assessed. In addition to these studies, in vitro drug absorption from the different formulation approaches were evaluated in a lipolysis-permeation device, and the obtained data was used to evaluate the in vitro in vivo correlation. The results showed elevated concentrations of free fatty acids and bile salts in the DIF when 2 g of LBF was administered, compared to only water. As expected, the SIF and DIF solubility data revealed that carvedilol solubilization increased by the presence of lipids and lipid digestion products. Moreover, coadministration of LBF and drug demonstrated equal plasma exposure to the lipid-based drug formulation. Furthermore, evaluation of in vitro absorption resulted in the same rank order for the LBFs as in the in vivo dog study. In conclusion, this study demonstrated increased intestinal solubilization from a small amount of LBF, caused by lipid digestion products and bile secretion. The outcomes also support the use of coadministration of LBF as a potential dosing regimen in cases where it is beneficial to have the drug in the solid form, e.g. due to chemical instability in the lipid vehicle. Finally, the in vitro lipolysis-permeation used herein established IVIVC for carvedilol in the presence of LBFs.

Development and Characterization of a Self-Nanoemulsifying Drug Delivery System Comprised of Rice Bran Oil for Poorly Soluble Drugs

Poor aqueous solubility and low bioavailability are limiting factors in the oral delivery of lipophilic drugs. In a formulation approach to overcome these limitations, rice bran (RB) oil was evaluated as drug carrier in the development of self-nanoemulsifying drug delivery systems (SNEDDS). The performance of RB in formulations incorporating Kolliphor RH40 or Kolliphor EL as surfactants and Transcutol HP as cosolvent was compared to a common oil vehicle, corn oil (CO). Serial dilutions of the preconcentrates were performed in various media [distilled water and simulated intestinal fluids mimicking fasted state (FaSSIF) and fed state (FeSSIF)] and at different dilution ratios to simulate the in vivo droplets' behavior. The developed SNEDDS were assessed by means of phase separation, droplet size, polydispersity index, and ζ-potential. Complex ternary diagrams were constructed to identify compositions exhibiting monophasic behavior, droplet size < 100 nm, and polydispersity index (PDI) < 0.25. Multifactor analysis and response surface areas intended to determine the factors significantly affecting droplet size. The oil capacity to accommodate lipophilic drugs was assessed via fluorescence spectroscopy based on the solvatochromic behavior of Nile Red. Solubility studies were performed to prepare fenofibrate- and itraconazole-loaded SNEDDS and assess their droplet size, whereas dissolution experiments were conducted in simulated intestinal fluids. Caco-2 cell viability studies confirmed the safety of the SNEDDS formulations at 1:100 and 1:1000 dilutions after cell exposure in culture for 4 h. The obtained results showed similar performance between RB and CO supporting the potential of RB as oil vehicle for the effective oral delivery of lipophilic compounds.

Exploring the utility of the Chasing Principle: influence of drug-free SNEDDS composition on solubilization of carvedilol, cinnarizine and R3040 in aqueous suspension

This study assessed the influence of the composition of drug-free SNEDDS co-dosed with aqueous suspensions of carvedilol (CAR), cinnarizine (CIN) or R3040 on drug solubilization in a two-compartment in vitro lipolysis model. Correlation of drug logP or solubility in SNEDDS with drug solubilization during in vitro lipolysis in the presence of drug-free SNEDDS was assessed. SNEDDS with varying ratios of soybean oil:Maisine 35-1 (1:1, w/w) and Kolliphor RH40, with ethanol at 10% (w/w) were used. SNEDDS were named F65, F55 and F20 (numbers refer to the percentage of lipids) and aqueous suspensions without drug-free SNEDDS (F0) were also analyzed. While the ranking order of drug solubilization was F65=F55=F20>F0 for CAR; F65=F55>F20>F0 for CIN and F65=F55=F20>F0 for R3040 - with higher CAR solubilization than for R3040 and CIN - the ranking of S eq of CAR, CIN and R3040 in SNEDDS was F65F20 and F65>F55>F20, respectively. Therefore, the composition of SNEDDS influenced the solubilization of CIN, but not CAR and R3040. Furthermore, high S eq in SNEDDS did not reflect high drug solubilization. As CAR (logP 3.8) showed higher solubilization than CIN (logP 5.8) and R3040 (logP 10.4), a correlation between drug logP and drug solubilization was observed.

Identification of beagle food taking patterns and protocol for food effects evaluation on bioavailability

Food is a known primary role to the exposure of the drugs orally administered. Since each animal may have unique food taking pattern and it is difficult to manipulate the food taking to animals, there lacks rationalized protocol for the food effects in pre-clinic study. The objective of this study was to identify the beagle food taking patterns and demonstrate their effects on bioavailability in valsartan. Herein, four types of food taking patterns of beagle were identified via inter-day and intra-day analysis, and named as Persisting, Pulsing, Postponing, Pushing (“4P Modes”), respectively, which were also validated by principal component analysis (PCA). Interestingly, food intake resulted in a reduced area under the concentration-time curve (AUC_0–12h), maximum concentration (C_max) and absorption rate, whilst the reduction varied in “4P Modes” of food taking. General considerations in the design of experiment for food effect to the bioavailability in beagles have been established as: to recognize the food taking patterns in each animal, to confirm the inter-day stability of the food taking behaviors, to trace the food taking patterns in parallel with plasma sampling. In conclusion, the right animals with proper food taking patterns should be assessed and selected for pre-clinic bioavailability evaluations.

Food for thought: formulating away the food effect - a PEARRL review

OBJECTIVES

Co-ingestion of oral dosage forms with meals can cause substantial changes in bioavailability relative to the fasted state. Food-mediated effects on bioavailability can have significant consequences in drug development, regulatory and clinical settings. To date, the primary focus of research has focused on the ability to mechanistically understand the causes and predict the occurrence of these effects.

KEY FINDINGS

The current review describes the mechanisms underpinning the occurrence of food effects, sheds new insights on the relative frequency for newly licensed medicines and describes the various methods by which they can be overcome. Analysis of oral medicines licensed by either the EMA or FDA since 2010 revealed that over 40% display significant food effects. Due to altered bioavailability, these medicines are often required to be dosed, rather restrictively, in either the fed or the fasted state, which can hinder clinical usefulness.

SUMMARY

There are clinical and commercial advantages to predicting the presence of food effects early in the drug development process, in order to mitigate this risk of variable food effect bioavailability. Formulation approaches aimed at reducing variable food-dependent bioavailability, through the use of bio-enabling formulations, are an essential tool in addressing this challenge and the latest state of the art in this field are summarised here.

Self-Emulsifying Granules and Pellets: Composition and Formation Mechanisms for Instant or Controlled Release

Many articles have been published in the last two decades demonstrating improvement in the dissolution and absorption of low solubility drugs when formulated into self-emulsifying drug delivery systems (SEDDS). Several such pharmaceutical products have appeared in the market for medium dose (Neoral^® for Cyclsoprin A, Kaletra^® for Lopinavir and Ritonavir), or low dose medications (Rocaltrol^® for Calcitriol and Avodart^® for Dutasteride). However, these are in the form of viscous liquids or semisolid presentations, characterized by the disadvantages of high production cost, stability problems and the requirement of large quantities of surfactants. Solid SEDDS (S-SEDDS), as coarse powders, granules or pellets, besides solubility improvement, can be filled easily into capsules or processed into tablets providing a handy dosage form with instant release, which can be further developed into controlled release by mixing with suitable polymers or coating with polymeric films. In this review, the materials used for the preparation of S-SEDDS, their properties and role in the formulations are detailed. Factors affecting the physical characteristics, mechanical properties of S-SEDDS as well as their in vitro release and in vivo absorption are discussed. The mechanisms involved in the formation of instant and sustained release self-emulsifying granules or pellets are elucidated. Relationships are demonstrated between the characteristics of S-SEDDS units (size, shape, mechanical properties, re-emulsification ability, drug migration and drug release) and the properties of the submicron emulsions used as massing liquids, with the aim to further elucidate the formation mechanisms. The influence of the composition of the powdered ingredients forming the granule or pellet on the properties of S-SEDDS is also examined. Examples of formulations of S-SEDDS that have been reported in the literature in the last thirteen years (2004–2017) are presented.

Evaluation of preclinical formulations for a poorly water-soluble compound

One central aim of the present work was to find a robust oral formulation approach for Compound A, both to achieve reliable pharmacodynamic read outs but also for long time safety assessment studies. The compound has low aqueous solubility (0.4μM at 37°C), is highly lipophilic and has high Caco-2 permeability, i.e. a typical BCS II compound. A nanocrystal formulation, some oil approaches and a fat diet approach were evaluated in vivo in rats. The two latter strategies resulted in significantly higher in vivo exposures after oral administration compared to the nanocrystal approach. For simplicity, and due to the project development program, a food pellet formulation was selected. In addition, tentative data from a subcutaneous study in mice using nanocrystals of the compound are presented, showing extended profiles on the cost of Cmax. Exposure data in monkeys after administration of nanocrystals both intravenously and per oral are presented. When switched from nanocrystals to an oil formulation, the observed oral exposure behavior was similar as observed in rats.

50years of oral lipid-based formulations: Provenance, progress and future perspectives

Lipid based formulations (LBF) provide well proven opportunities to enhance the oral absorption of drugs and drug candidates that sit close to, or beyond, the boundaries of Lipinski's 'rule-of-five' chemical space. Advantages in permeability, efflux and presystemic metabolism are evident; however, the primary benefit is in increases in dissolution and apparent intestinal solubility for lipophilic, poorly water soluble drugs. This review firstly details the inherent advantages of LBF, their general properties and classification, and provides a brief retrospective assessment of the development of LBF over the past fifty years. More detailed analysis of the ability of LBF to promote intestinal solubilisation, supersaturation and absorption is then provided alongside review of the methods employed to assess formulation performance. Critical review of the ability of simple dispersion and more complex in vitro digestion methods to predict formulation performance subsequently reveals marked differences in the correlative ability of in vitro tests, depending on the properties of the drug involved. Notably, for highly permeable low melting drugs e.g. fenofibrate, LBF appear to provide significant benefit in all cases, and sustained ongoing solubilisation may not be required. In other cases, and particularly for higher melting point drugs such as danazol, where re-dissolution of crystalline precipitate drug is likely to be slow, correlations with ongoing solubilisation and supersaturation are more evident. In spite of their potential benefits, one limitation to broader use of LBF is low drug solubility in the excipients employed to generate formulations. Techniques to increase drug lipophilicity and lipid solubility are therefore explored, and in particular those methods that provide for temporary enhancement including lipophilic ionic liquid and prodrug technologies. The transient nature of these lipophilicity increases enhances lipid solubility and LBF viability, but precludes enduring effects on receptor promiscuity and off target toxicity. Finally, recent efforts to generate solid LBF are briefly described as a means to circumvent the need to encapsulate in soft or hard gelatin capsules, although the latter remain popular with consumers and a proven means of LBF delivery.