Electrode passivation caused by polymerization of different phenolic compounds

A photoelectrocatalytic system as a reaction platform for selective radical-radical coupling

The selection of electrode material is a critical factor that determines the selectivity of electrochemical organic reactions. However, the fundamental principles governing this relationship are still largely unexplored. Herein, we demonstrate a photoelectrocatalytic (PEC) system as a promising reaction platform for the selective radical-radical coupling reaction owing to the inherent charge-transfer properties of photoelectrocatalysis. As a model reaction, the radical trifluoromethylation of arenes is shown on hematite photoanodes without employing molecular catalysts. The PEC platform exhibited superior mono- to bis-trifluoromethylated product selectivity compared to conventional electrochemical methods utilizing conducting anodes. Electrochemical and density functional theory (DFT) computational studies revealed that controlling the kinetics of anodic oxidation of aromatic substrates is essential for increasing reaction selectivity. Only the PEC configuration could generate sufficiently high-energy charge carriers with controlled kinetics due to the generation of photovoltage and charge-carrier recombination, which are characteristic features of semiconductor photoelectrodes. This study opens a novel approach towards selective electrochemical organic reactions through understanding the intrinsic physicochemical properties of semiconducting materials.

All-in-one continuous electrochemical monitoring of 2-phenylphenol removal from water by electro-Fenton treatment

The biggest allure of heterogeneous electro-Fenton (HEF) processes largely fails on its high efficiency for the degradation of a plethora of hazardous compounds present in water, but still challenging to search for good and cost-effective electrocatalyst. In this work, carbon black (CB) and oxidised carbon black (CBox) materials were investigated as cathodes in the electrochemical production of hydrogen peroxide involved in HEF reaction for the degradation of 2-phenylphenol (2PP) as a target pollutant. The electrodes were fabricated by employing carbon cloth as support, and the highest H2O2 production yields were obtained for the CBox, pointing out the beneficial effect of the hydrophilic character of the electrode and oxygen-type functionalization of the carbonaceous surface. HEF degradation of 2PP was explored at -0.7 V vs. Ag/AgCl exhibiting the best conversion rates and degradation grade (total organic carbon) for the CBox-based cathode. In addition, the incorporation of an electrochemical sensor of 2PP in line with the HEF reactor was accomplished by the use of screen-printed electrodes (SPE) in order to monitor the pollutant degradation. The electrochemical sensor performance was evaluated from the oxidation of 2PP in the presence of Fe2+ ions by using square wave voltammetry (SWV) technique. The best electrochemical sensor performance was based on SPE modified with Meldola Blue showing a high sensitivity, low detection limit (0.12 ppm) and wide linear range (0.5-21 ppm) with good reproducibility (RSD 2.3 %). The all-in-one electrochemical station has been successfully tested for the degradation and quantification of 2PP, obtaining good recoveries analysing spiked waters from different water matrices origins.

In situ generation of highly localized chlorine by laser-induced graphene electrodes during electrochemical disinfection

Laser-induced graphene (LIG) has gained popularity for electrochemical water disinfection due to its efficient antimicrobial activity when activated with low voltages. However, the antimicrobial mechanism of LIG electrodes is not yet fully understood. This study demonstrated an array of mechanisms working synergistically to inactivate bacteria during electrochemical treatment using LIG electrodes, including the generation of oxidants, changes in pH-specifically high alkalinity associated with the cathode, and electro-adsorption on the electrodes. All these mechanisms may contribute to the disinfection process when bacteria are close to the surface of the electrodes where inactivation was independent of the reactive chlorine species (RCS); however, RCS was likely responsible for the predominant cause of antibacterial effects in the bulk solution (i.e., ≥100 mL in our study). Furthermore, the concentration and diffusion kinetics of RCS in solution was voltage-dependent. At 6 V, RCS achieved a high concentration in water, while at 3 V, RCS was highly localized on the LIG surface but not measurable in water. Despite this, the LIG electrodes activated by 3 V achieved a 5.5-log reduction in Escherichia coli (E.coli) after 120-min electrolysis without detectable chlorine, chlorate, or perchlorate in the water, suggesting a promising system for efficient, energy-saving, and safe electro-disinfection.

Improved procedure for square-wave voltammetric sensing of fenhexamid residues on blueberries peel surface at the anodically pretreated boron-doped diamond electrode

BACKGROUND

Fungicide fenhexamid (FH) has a high residual concentration on fruits and vegetables, thus, it is of high importance to monitor the level of FH residues on foodstuff samples. So far, the assay of FH residues in selected foodstuff samples has been conducted by electroanalytical methods on sp² carbon-based electrodes that are well-known to be susceptible to severe fouling of the electrodes surfaces during electrochemical measurements. As an alternative, sp³ carbon-based electrode such as boron-doped diamond (BDD) can be used in the analysis of FH residues retained on the peel surface of foodstuff (blueberries) sample.

RESULTS

In situ anodic pretreatment of the BDDE surface was found to be the most successful strategy to remediate the passivated BDDE surface by FH oxidation (by)products, and the best validation parameters, i.e., the widest linear range (3.0-100.0 μmol L^-1), the highest sensitivity (0.0265 μA L μmol^-1) and the lowest limit of detection (0.821 μmol L^-1), were achieved on the anodically pretreated BDDE (APT-BDDE) in a Britton-Robinson buffer, pH 2.0, using square-wave voltammetry (SWV). The assay of FH residues retained on blueberries peel surface was performed on the APT-BDDE using SWV, and the obtained concentration of FH residues of 6.152 μmol L^-1 (1.859 mg kg^-1) was found to be below the maximum residue value fixed for blueberries by the European Union regulations (20 mg kg^-1).

SIGNIFICANCE AND NOVELTY

In this work, a protocol based on a very easy and fast foodstuff sample preparation procedure combined with the straightforward pretreatment approach of the BDDE surface was elaborated for the first time for the monitoring of the level of FH residues retained on the peel surface of blueberries samples. The presented reliable, cost-effective, and easy-to-use protocol could find its application as a rapid screening method for the control of food safety.

Wastewater treatment by anodic oxidation in electrochemical advanced oxidation process: Advance in mechanism, direct and indirect oxidation detection methods

Electrochemical Advanced Oxidation Process (EAOP) has been applied to the degradation of refractory pollutants in wastewater due to its strong oxidation capacity, high degradation efficiency, simple operation, and mild reaction. Among electrochemical processes, anodic oxidation (AO) is the most widely used and its mechanism is mainly divided into direct oxidation and indirect oxidation. Direct oxidation means that pollutants are oxidized at the anode by direct electron transfer. Indirect oxidation refers to the generation of active species during the electrolytic reaction, which acts on pollutants. The mechanism of AO process is controlled by many factors, including electrode type, electrocatalyst material, wastewater composition, pH, applied current and voltage levels. It is very important to explore the reaction mechanism of electrochemical treatment, which determines the efficiency of the reaction, the products of the reaction, and the extent of reaction. This paper firstly reviews the current research progress on the mechanism of AO process, and summarizes in detail the different mechanisms caused by influencing factors under common AO process. Then, strategies and methods to distinguish direct oxidation and indirect oxidation mechanisms are reviewed, such as intermediate product analysis, electrochemical test analysis, active species detection, theoretical calculation, and the limitations of these methods are analyzed. Finally some suggestions are put forward for the study of the mechanism of electrochemical advanced oxidation.

Photoelectrochemical Behavior of Phthalocyanine-Sensitized TiO2 in the Presence of Electron-Shuttling Mediators

Dye-sensitized TiO₂ has found many applications for dye-sensitized solar cells (DSSC), solar-to-chemical energy conversion, water/air purification systems, and (electro)chemical sensors. We report an electrochemical system for testing dye-sensitized materials that can be utilized in photoelectrochemical (PEC) sensors and energy conversion. Unlike related systems, the reported system does not require a direct electron transfer from semiconductors to electrodes. Rather, it relies on electron shuttling by redox mediators. A range of model photocatalytic materials were prepared using three different TiO₂ materials (P25, P90, and PC500) and three sterically hindered phthalocyanines (Pcs) with electron-rich tert-butyl substituents (t-Bu₄PcZn, t-Bu₄PcAlCl, and t-Bu₄PcH₂). The materials were compared with previously developed TiO₂ modified by electron-deficient, also sterically hindered fluorinated phthalocyanine F₆₄PcZn, a singlet oxygen (¹O₂) producer, as well as its metal-free derivative, F₆₄PcH₂. The PEC activity depended on the redox mediator, as well as the type of TiO₂ and Pc. By comparing the responses of one-electron shuttles, such as K₄Fe(CN)₄, and ¹O₂-reactive electron shuttles, such as phenol, it is possible to reveal the action mechanism of the supported photosensitizers, while the overall activity can be assessed using hydroquinone. t-Bu₄PcAlCl showed significantly lower blank responses and higher specific responses toward chlorophenols compared to t-Bu₄PcZn due to the electron-withdrawing effect of the Al³⁺ metal center. The combination of reactivity insights and the need for only microgram amounts of sensing materials renders the reported system advantageous for practical applications.

Emerging bioanalytical sensors for rapid and close-to-real-time detection of priority abiotic and biotic stressors in aquaculture and culture-based fisheries

Abiotic stresses of various chemical contamination of physical, inorganic, organic and biotoxin origin and biotic stresses of bacterial, viral, parasitic and fungal origins are the significant constraints in achieving higher aquaculture production. Testing and rapid detection of these chemical and microbial contaminants are crucial in identifying and mitigating abiotic and biotic stresses, which has become one of the most challenging aspects in aquaculture and culture-based fisheries. The classical analytical techniques, including titrimetric methods, spectrophotometric, mass spectrometric, spectroscopic, and chromatographic techniques, are tedious and sometimes inaccessible when required. The development of novel and improved bioanalytical methods for rapid, selective and sensitive detection is a wide and dynamic field of research. Biosensors offer precise detection of biotic and abiotic stressors in aquaculture and culture-based fisheries within no time. This review article allows filling the knowledge gap for detection and monitoring of chemical and microbial contaminants of abiotic and biotic origin in aquaculture and culture-based fisheries using nano(bio-) analytical technologies, including nano(bio-)molecular and nano(bio-)sensing techniques.

Removal of ammonia and phenol from saline chemical wastewater by ionizing radiation: Performance, mechanism and toxicity

Saline chemical wastewater containing ammonia and toxic organic pollutants has been a challenge for conventional wastewater treatment technology. Advanced treatment is thus required. In this study, the removal of ammonia and phenol in saline chemical wastewater by radiation was investigated in detail. The results showed that chloridion in saline chemical wastewater could be transferred to •Cl and •ClO by radiation, which promoted ammonia oxidation, but inhibited phenol degradation. Solution pH affected the types of reactive species, which further affected the removal of ammonia and phenol. When ammonia and phenol co-existed in saline chemical wastewater, the removal efficiency of ammonia was depressed compared to that in the absence of phenol. Similarly, the phenol removal efficiency was also depressed in the presence of ammonia when the solution pH was lower than 7.0. Interestingly, the phenol removal efficiency was improved with increase of either chloridion concentration (2-8 g/L) or dose (2-5 kGy), which was attributed to the formation of intermediate nitrogen-centered radicals that can react with phenol. In addition, the intermediate products of phenol degradation under different conditions were identified. The acute toxicity of saline chemical wastewater after radiation treatment was evaluated. The results of this study could provide an insight into the removal of ammonia and phenol from saline chemical wastewater by radiation technology.

Propofol inhibits the myeloperoxidase activity by acting as substrate through a redox process

BACKGROUND

Propofol (2,6-diisopropylphenol) is frequently used as intravenous anesthetic agent, especially in its injectable form (Diprivan), to initiate and maintain sedative state during surgery or in intensive care units. Numerous studies have reported the antioxidant and anti-inflammatory effect of propofol. The oxidant enzyme myeloperoxidase (MPO), released from activated neutrophils, plays a key role in host defense. An increase of the circulating MPO concentration has been observed in patients admitted in intensive care unit and presenting a systemic inflammatory response related to septic shock or trauma.

METHODS

This study investigates the immunomodulatory action of propofol and Diprivan as inhibitor of the oxidant activity of MPO. The understanding of the redox action mechanism of propofol and Diprivan on the myeloperoxidase chlorination and peroxidase activities has been refined using the combination of fluorescence and absorption spectroscopies with docking and cyclic voltammetry.

RESULTS

Propofol acts as a reversible MPO inhibitor. The molecule interacts as a reducing substrate in the peroxidase cycle and promotes the accumulation of compound II. At acidic pH (5.5), propofol and Diprivan do not inhibit the chlorination activity, but their action increases at physiological pH (7.4). The main inhibitory action of Diprivan could be attributed to its HOCl scavenging property.

GENERAL SIGNIFICANCE

Propofol can act as a reversible MPO inhibitor at clinical concentrations. This property could, in addition to other previously proven anti-inflammatory actions, induce an immunomodulatory action, beneficial during clinical use, particularly in the treatment of systemic inflammation response syndrome.

Application of palladium nanoparticles supported organo-kaolinite for 4-chloro-2-nitroaniline catalytic reduction and electrochemical detection

Palladium nanoparticles (PdNPs) supported organo-kaolinite was used as a solid catalyst for the reduction and electrochemical detection of 4-chloro-2-nitroaniline (CNA). During the catalytic reduction in presence of NaBH4, the effects...

Carbon Materials in Electroanalysis of Preservatives: A Review

Electrochemical sensors in electroanalysis are a particularly useful and relatively simple way to identify electroactive substances. Among the materials used to design sensors, there is a growing interest in different types of carbon. This is mainly due to its non-toxic properties, low cost, good electrical conductivity, wide potential range, and the possibility of using it in both aqueous and nonaqueous media. The electrodes made of carbon, and especially of carbon modified with different materials, are currently most often used in the voltammetric analysis of various compounds, including preservatives. The objective of this paper is to present the characteristics and suitability of different carbon materials for the construction of working electrodes used in the voltammetric analysis. Various carbon materials were considered and briefly discussed. Their analytical application was presented on the example of the preservatives commonly used in food, cosmetic, and pharmaceutical preparations. It was shown that for the electroanalysis of preservatives, mainly carbon electrodes modified with various modifiers are used. These modifications ensure appropriate selectivity, high sensitivity, low limits of detection and quantification, as well as a wide linearity range of voltammetric methods of their identification and determination.

Functionalization of Screen-Printed Sensors with a High Reactivity Carbonaceous Material for Ascorbic Acid Detection in Fresh-Cut Fruit with Low Vitamin C Content

In this study, carbon screen-printed sensors (C-SPEs) were functionalized with a high reactivity carbonaceous material (HRCM) to measure the ascorbic acid (AA) concentration in fresh-cut fruit (i.e., watermelon and apple) with a low content of vitamin C. HRCM and the functionalized working electrodes (WEs) were characterized by SEM and TEM. The increases in the electroactive area and in the diffusion of AA molecules towards the WE surface were evaluated by cyclic voltammetry (CV) and chronoamperometry. The performance of HRCM-SPEs were evaluated by CV and constant potential amperometry compared with the non-functionalized C-SPEs and MW-SPEs nanostructured with multi-walled carbon nanotubes. The results indicated that SPEs functionalized with 5 mg/mL of HRCM and 10 mg/mL of MWCNTs had the best performances. HRCM and MWCNTs increased the electroactive area by 1.2 and 1.4 times, respectively, whereas, after functionalization, the AA diffusion rate towards the electrode surface increased by an order of 10. The calibration slopes of HRCM and MWCNTs improved from 1.9 to 3.7 times, thus reducing the LOD of C-SPE from 0.55 to 0.15 and 0.28 μM, respectively. Finally, the functionalization of the SPEs proved to be indispensable for determining the AA concentration in the watermelon and apple samples.

Propofol detection for monitoring of intravenous anaesthesia: a review

This paper presents a review of established and emerging methods for detecting and quantifying the intravenous anaesthetic propofol in solution. There is growing evidence of numerous advantages of total intravenous anaesthesia using propofol compared to conventional volatile-based anaesthesia, both in terms of patient outcomes and environmental impact. However, volatile-based anaesthesia still accounts for the vast majority of administered general anaesthetics, largely due to a lack of techniques for real-time monitoring of patient blood propofol concentration. Herein, propofol detection techniques that have been developed to date are reviewed alongside a discussion of remaining challenges.

In Vitro Evaluation of Pro- and Antioxidant Effects of Flavonoid Tricetin in Comparison to Myricetin

Flavonoids are rather common plant phenolic constituents that are known for potent antioxidant effects and can be beneficial for human health. Flavonoids with a pyrogallol moiety are highly efficient reducing agents with possible pro- and antioxidant effects, depending on the reaction milieu. Therefore, the redox properties of myricetin and tricetin were investigated by differential pulse voltammetry and deoxyribose degradation assay. Tricetin proved to be a good antioxidant but only showed negligible pro-oxidant activity in one of the deoxyribose degradation assay variants. Compared to tricetin, myricetin showed pro- and antioxidant effects. The more efficient reducing properties of myricetin are probably caused by the positive mesomeric effect of the enolic 3-hydroxy group on ring C. It is evident that the antioxidant properties of structurally similar flavonoids can be converted to apparent pro-oxidant effects by relatively small structural changes, such as hydroxylation. Since reactive oxygen species (ROS) often serve as secondary messengers in pathological and physiological processes in animal and plant cells, the pro- and antioxidant properties of flavonoids are an important part of controlling mechanisms of tissue signal cascades.

Electrode Materials in Modern Organic Electrochemistry

The choice of electrode material is critical for achieving optimal yields and selectivity in synthetic organic electrochemistry. The material imparts significant influence on the kinetics and thermodynamics of electron transfer, and frequently defines the success or failure of a transformation. Electrode processes are complex and so the choice of a material is often empirical and the underlying mechanisms and rationale for success are unknown. In this review, we aim to highlight recent instances of electrode choice where rationale is offered, which should aid future reaction development.

Ruthenium oxide nanoparticles immobilized over Citrus limetta waste derived carbon material for electrochemical detection of hexestrol

Hexestrol is a non-steroidal estrogen which causes carcinogenic effects in animals. It is therefore important to develop sensitive and selective test methods for its early detection. Herein, we report the development of an electrochemical sensor to detect hexestrol in ultralow concentrations. In order to devise a simple and cost-effective hexestrol sensing electrode, attention is paid to the development of biomass-derived porous carbon (PCB) with large surface area and suitable porosity to immobilize ruthenium oxide nanoparticles (RuO₂ NPs, 3-4 nm). The leftover Citrus limetta pulp is chosen as waste biomass since it has N and O based chemical species. Structural, morphological and compositional analysis of PCB and RuO₂@PCB revealed well-dispersed RuO₂ NPs over the PCB surface. High loading (5.27 at%) of Ru content is achieved due to the large surface area of PCB. Cyclic voltammetry, chronoamperometry and differential pulse voltammetry results suggest that the RuO₂@PCB/ITO electrode is capable of detecting hexestrol concentration (in the range of 1 × 10^-7-2 × 10^-5 M). The practical application of hexestrol detection in milk samples demonstrates the recovery from 96.28 to 101%.

Recent developments in carbon-based two-dimensional materials: synthesis and modification aspects for electrochemical sensors

This review (162 references) focuses on two-dimensional carbon materials, which include graphene as well as its allotropes varying in size, number of layers, and defects, for their application in electrochemical sensors. Many preparation methods are known to yield two-dimensional carbon materials which are often simply addressed as graphene, but which show huge variations in their physical and chemical properties and therefore on their sensing performance. The first section briefly reviews the most promising as well as the latest achievements in graphene synthesis based on growth and delamination techniques, such as chemical vapor deposition, liquid phase exfoliation via sonication or mechanical forces, as well as oxidative procedures ranging from chemical to electrochemical exfoliation. Two-dimensional carbon materials are highly attractive to be integrated in a wide field of sensing applications. Here, graphene is examined as recognition layer in electrochemical sensors like field-effect transistors, chemiresistors, impedance-based devices as well as voltammetric and amperometric sensors. The sensor performance is evaluated from the material's perspective of view and revealed the impact of structure and defects of the 2D carbon materials in different transducing technologies. It is concluded that the performance of 2D carbon-based sensors is strongly related to the preparation method in combination with the electrical transduction technique. Future perspectives address challenges to transfer 2D carbon-based sensors from the lab to the market. Graphical abstract Schematic overview from synthesis and modification of two-dimensional carbon materials to sensor application.

Natural phenolic antioxidants electrochemistry: Towards a new food science methodology

Natural phenolic compounds are abundant in the vegetable kingdom, occurring mainly as secondary metabolites in a wide variety of chemical structures. Around 10,000 different plant phenolic derivatives have been isolated and identified. This review provides an exhaustive overview concerning the electron transfer reactions in natural polyphenols, from the point of view of their in vitro antioxidant and/or pro-oxidant mode of action, as well as their identification in highly complex matrixes, for example, fruits, vegetables, wine, food supplements, relevant for food quality control, nutrition, and health research. The accurate assessment of polyphenols' redox behavior is essential, and the application of the electrochemical methods in routine quality control of natural products and foods, where the polyphenols antioxidant activity needs to be quantified in vitro, is of the utmost importance. The phenol moiety oxidation pathways and the effect of substituents and experimental conditions on their electrochemical behavior will be reviewed. The fundamental principles concerning the redox behavior of natural polyphenols, specifically flavonoids and other benzopyran derivatives, phenolic acids and ester derivatives, quinones, lignins, tannins, lignans, essential oils, stilbenes, curcuminoids, and chalcones, will be described. The final sections will focus on the electroanalysis of phenolic antioxidants in natural products and the electroanalytical evaluation of in vitro total antioxidant capacity.

Detection of carvacrol in essential oils by electrochemical polymerization

Carvacrol (Carv) and thymol (TOH), components of essential oils, are known by their antimicrobial and antioxidant activity. However, Carv but not TOH seems to be the responsible of anti-inflammatory and inhibition of Cu corrosion properties. Since Carv and TOH are positional isomers, their identification is tricky and GC-MS is usually required. To find simple and inexpensive methods that allow the detection of Carv in presence of TOH (e.g. essential oils), cyclic voltammetry and chronoamperometry tests using Pt and Cu as electrodes in TOH and Carv containing mixtures and essential oils were made. Electrochemical and ATR-FTIR results show that pure phytocompounds and mixtures lead to the formation of polymeric layers on both metallic surfaces. Results show that only Cu is suitable for Carv detection. Potentiostatic and potentiodynamic detection is simple and conclusive in Carv + TOH mixtures and in essential oils due to the formation of a homogeneous blocking Carv electropolymeric layer on Cu.

Electrochemical Aminoxyl-Mediated Oxidation of Primary Alcohols in Lignin to Carboxylic Acids: Polymer Modification and Depolymerization

An electrochemical process has been developed for chemoselective oxidation of primary alcohols in lignin to the corresponding carboxylic acids. The electrochemical oxidation reactions proceed under mildly basic conditions and employ 2,2,6,6-tetramethyl-1-piperidine N-oxyl (TEMPO) and 4-acetamido-TEMPO (ACT) as catalytic mediators. Lignin model compounds and related alcohols are used to conduct structure-reactivity studies that provide insights into the origin of the reaction selectivity. The method is applied to the oxidation of lignin extracted from poplar wood chips via a mild acidolysis method, and the reaction affords a novel polyelectrolyte material. Gel permeation chromatography data for the oxidized lignin shows that this material has a molecular weight and molecular weight distribution very similar to that of the extracted lignin, but notable differences are also evident. Base titration reveals a significant increase in the acid content, and the oxidized lignin has much higher water solubility relative to the extracted lignin. Treatment of the oxidized lignin under acidic conditions results in depolymerization of the material into characterized aromatic monomers in nearly 30 wt% yield.

Electro-oxidation of organic pollutants by reactive electrochemical membranes

Electro-oxidation processes are promising options for the removal of organic pollutants from water. The major appeal of these technologies is the possibility to avoid the addition of chemical reagents. However, a major limitation is associated with slow mass transfer that reduces the efficiency and hinders the potential for large-scale application of these technologies. Therefore, improving the reactor configuration is currently one of the most important areas for research and development. The recent development of a reactive electrochemical membrane (REM) as a flow-through electrode has proven to be a breakthrough innovation, leading to both high electrochemically active surface area and convection-enhanced mass transport of pollutants. This review summarizes the current state of the art on REMs for the electro-oxidation of organic compounds by anodic oxidation. Specific focuses on the electroactive surface area, mass transport, reactivity, fouling and stability of REMs are included. Recent advances in the development of sub-stoichiometric titanium oxide REMs as anodes have been made. These electrodes possess high electrical conductivity, reactivity (generation of ^•OH), chemical/electrochemical stability, and suitable pore structure that allows for efficient mass transport. Further development of REMs strongly relies on the development of materials with suitable physico-chemical characteristics that produce electrodes with efficient mass transport properties, high electroactive surface area, high reactivity and long-term stability.

Spectroscopic Investigation of the Electrosynthesis of Diphenyl Carbonate from CO and Phenol on Gold Electrodes

In this work, we study the synthesis of diphenyl carbonate (DPC) from phenol and CO on gold electrodes studied by means of in situ Fourier transform infrared spectroscopy (FTIR). The results show that, on gold electrodes, the formation of DPC is observed at potentials as low as 0.4 V vs Ag/AgCl, together with the formation of dimethyl carbonate (DMC) from the carbonylation of methanol that was used as a solvent. The spectroelectrochemical results also suggest that the formation of DPC occurs via the replacement of the methoxy groups from DMC with phenoxy groups from phenol and not directly by the carbonylation of phenol. Although this transesterification process is known to occur with heterogeneous catalysts, it has not been reported under electrochemical conditions. These are interesting findings, since the direct DPC production by carbonylation of phenol to DPC is usually performed with Pd-based catalysts. With this reaction scheme of transesterification happening under electrochemical conditions, other non-Pd catalysts could be used as well for one-step DPC production from phenol and CO. These findings give important mechanistic insights into this reaction and open up possibilities to an alternative process for the production of DPC.

Scalable carbon dioxide electroreduction coupled to carbonylation chemistry

Significant efforts have been devoted over the last few years to develop efficient molecular electrocatalysts for the electrochemical reduction of carbon dioxide to carbon monoxide, the latter being an industrially important feedstock for the synthesis of bulk and fine chemicals. Whereas these efforts primarily focus on this formal oxygen abstraction step, there are no reports on the exploitation of the chemistry for scalable applications in carbonylation reactions. Here we describe the design and application of an inexpensive and user-friendly electrochemical set-up combined with the two-chamber technology for performing Pd-catalysed carbonylation reactions including amino- and alkoxycarbonylations, as well as carbonylative Sonogashira and Suzuki couplings with near stoichiometric carbon monoxide. The combined two-reaction process allows for milligram to gram synthesis of pharmaceutically relevant compounds. Moreover, this technology can be adapted to the use of atmospheric carbon dioxide.

Electroreduction of CO₂ to CO is a potential valorisation pathway of carbon dioxide for fine chemicals production. Here, the authors show a user-friendly device that couples CO₂ electroreduction with carbonylation chemistry for up to gram scale synthesis of pharmaceuticals even under atmospheric CO₂.