Cyclodextrin-reduced graphene oxide hybrid nanosheets for the simultaneous determination of lead(II) and cadmium(II) using square wave anodic stripping voltammetry

Fabrication of melamine formaldehyde/graphene oxide composite for efficient static and dynamic adsorption of lead ions from aqueous medium

The present work discusses the synthesis, characterization, and environmental applications of graphene oxide (GO), melamine formaldehyde resin (MF), and melamine formaldehyde/graphene oxide composite (MGO) for the efficient removal of Pb2+ from aqueous medium via batch and column procedures. TGA, XRD, TEM, zeta potential, nitrogen adsorption/desorption, ATR-FTIR, and other characterization techniques revealed that MGO is characterized by a greater surface area (609 m2/g), total pore volume (1.0106 cm3/g), pHPZC (6.5), and the presence of various surface chemical functional groups. The synthesized solid adsorbents were used in both static and dynamic adsorption processes to remove Pb2+, with varying application parameters such as pH, starting concentration, adsorbent dosage, and shaking time in the case of static adsorption method. While through the column adsorption process the effects of column bed height, flow rate, and starting Pb2+ were taken into consideration. Results of the batch adsorption demonstrated that MGO had the highest Langmuir adsorption capacity (201.5 mg/g), and the adsorption fit the nonlinear Langmuir adsorption model and Elovich kinetic models. The adsorption of Pb2+ onto all prepared solid materials is endothermic, spontaneous, and physical in nature, as demonstrated by thermodynamic studies. Column adsorption of Pb2+ well fitted by Thomas and Yoon Nelson nonlinear adsorption models. MGO showed a maximum column adsorption capacity of 168 mg/g when applying 4 cm, 15 mL/min, and 150 mg/L as bed height, flow rate, and initial Pb2+, respectively. With only a 12.6% reduction in its adsorption capacity, column regeneration showed that MGO exhibited a high degree of reusability even after five cycles of adsorption/desorption studies.

Simultaneous removal of antimony and arsenic by nano-TiO2-crosslinked chitosan (TA-chitosan) beads

Antimony (Sb) and arsenic (As), carcinogenic and toxic elements, cause environmental pollution, in addition, the different chemical properties of Sb and As make them difficult to co-removal. In this study, we incorporated of nano-TiO₂ in the chitosan matrix to synthesized an efficient adsorption material nano-titania-crosslinked chitosan (TA-chitosan) beads, which was used to simultaneous removal of Sb and As from aqueous solution. TA-chitosan possesses a robust high removal performance for Sb and As under weakly acidic and neutral conditions; however, the removal is significantly inhibited under alkaline pH values. The adsorption kinetics of Sb and As on TA-chitosan conformed to the pseudo-second-order model, indicating that the removal of Sb and As was a chemical adsorption process. The adsorption isotherms of Sb(III/V) and As(III/V) on TA-chitosan follow the Langmuir model, and their maximum adsorption capacities are 70.19, 25.32, 64.52 and 102.89 mg·g^-1, respectively. The zeta potential showed that the surface of TA-chitosan was negatively charged over the full pH range upon Sb and As adsorption, demonstrating that negatively charged inner-sphere complexes were formed on TA-chitosan. This work may also provide a new perspective in titanium-chitosan material synthesis and heavy metal ions co-removal.

Surface functionalization of natural hydroxyapatite by polymerization of β-cyclodextrin: application as electrode material for the electrochemical detection of Pb(II)

A composite material prepared by polymerization of β-cyclodextrin (β-CD) on the surface of natural hydroxyapatite using citric acid as cross linker, was employed as electrode material for the detection of Pb(II). Hydroxyapatite was obtained from bovine bones, following a three-step procedure including pre-calcination, chemical treatment with (NH₄)₂HPO_4, and calcination. The structure and morphology of the pristine hydroxyapatite (NHAP_P0.5) and its functionalized counterpart (NHAP_p0.5-CA-β-CD) were examined using XRD, FTIR, and SEM. Upon deposition as thin film on a glassy carbon electrode (GCE), the ion exchange ability of NHAP_p0.5-CA-β-CD was exploited to elaborate a sensitive sensor for the detection of lead. The electroanalytical procedure was based on the chemical accumulation of Pb(II) ions under open-circuit conditions, followed by the detection of the preconcentrated species using differential pulse anodic stripping voltammetry. The reproducibility of the proposed method, based on a series of 8 measurements in a solution containing 2 μM Pb(II) gave a coefficient of variation of 1.27%. Significant parameters that can affect the stripping response of Pb(II) were optimized, leading to a linear calibration curve for lead in the concentration range of 2 × 10^-8 mol L^-1 - 20 × 10^-8 mol L^-1 (R² = 0.998). The detection limit (3S/m) and the sensitivity of the proposed sensor were 5.06 × 10^-10 mol L^-1 and 100.80 μA.μM^-1, respectively. The interfering effect of several ions expected to affect the determination of lead was evaluated, and the proposed sensor was successfully applied in the determination of Pb(II) ions in spring water, well water, river water and tap water samples.

Application of nanomaterials decorated with cyclodextrins as sensing elements for environment analysis

Environmental pollution has brought adverse socio-economic consequences. Organic pollutants and heavy metals are the main culprits of environmental pollution. It is of great importance to develop novel, simple, rapid, sensitive, and low-cost detection approaches for sensing trace pollutants in environmental samples. A lot of detection strategies which are based on varieties of nanomaterials have been developed for environmental analysis in past decades. In this review, we retrospect a variety of nanomaterials decorated with cyclodextrins (CDs), including carbon nanomaterials decorated with CDs, noble metal nanomaterials decorated with CDs and other nanomaterials decorated with CDs, and their application in environmental analysis. CDs is a type of ideal modifying molecules which could recognize targets, improve the solubility and dispersibility of corresponding functionalized materials, and enhance the detecting performance of designed sensors. CDs have been widely immobilized to carbon nanomaterials, noble metal nanomaterials, phosphorene (BP) nanocomposites, metal organic framework (MOF), and magnetic nanomaterials, and these nanocomposites have been utilized as the sensing elements for different target analytes. Immobilizing CDs on different nanomaterials could extremely expand the development of new sensing systems for environmental analysis based on these materials, greatly broaden the species of sensing targets, and apparently improve their sensing performance. Herein, the nanomaterials decorated with CDs, as sensing elements for environmental analysis, were reviewed including the types of nanomaterials decorated with CDs and their applications in various sensing strategies for environmental analysis. Finally, the perspectives of the nanomaterials decorated with CDs used as sensing elements were also discussed.

da Silva Alves D, Okeke C, Breslin CB. Cyclodextrins as Supramolecular Recognition Systems: Applications in the Fabrication of Electrochemical Sensors

Supramolecular chemistry, although focused mainly on noncovalent intermolecular and intramolecular interactions, which are considerably weaker than covalent interactions, can be employed to fabricate sensors with a remarkable affinity for a target analyte. In this review the development of cyclodextrin-based electrochemical sensors is described and discussed. Following a short introduction to the general properties of cyclodextrins and their ability to form inclusion complexes, the cyclodextrin-based sensors are introduced. This includes the combination of cyclodextrins with reduced graphene oxide, carbon nanotubes, conducting polymers, enzymes and aptamers, and electropolymerized cyclodextrin films. The applications of these materials as chiral recognition agents and biosensors and in the electrochemical detection of environmental contaminants, biomolecules and amino acids, drugs and flavonoids are reviewed and compared. Based on the papers reviewed, it is clear that cyclodextrins are promising molecular recognition agents in the creation of electrochemical sensors, chiral sensors, and biosensors. Moreover, they have been combined with a host of materials to enhance the detection of the target analytes. Nevertheless, challenges remain, including the development of more robust methods for the integration of cyclodextrins into the sensing unit.

Development of an enzymatic biosensor to determine eugenol in dental samples

A GCE/CRGO-βCD's/ADA-SPE/AuNPs biosensor was successfully developed to determine eugenol in dental samples. The optimal conditions to construct the biosensor were obtained from an experimental design based on the response surfaces methodology. The GCE/CRGO-βCD/ADA-SPE/AuNPs biosensor exhibited a very good analytical performance for the quantification of eugenol. Thus, it shows a linear range between 1.3 × 10^-8 and 1 × 10^-5 mol L^-1, with a sensitivity of (5.3 ± 0.3) x 10^-3 A mol^-1 L. The limits of detection and quantification were 4 × 10^-9 mol L^-1 and 1.3 × 10^-8 mol L^-1, respectively. Biosensors had an intraday and inter day reproducibility of 5% and 8%, respectively. The repeatability was of 3%, and the stability was 21 days (a decrease of 30% in current responses was observed after the fourth week). Recovery studies were performed in order to validate the proposed method. Recovery percentages were between 94 and 108%. A value of the apparent Michaellis-Menten constant, K_M^app, of 3.1 × 10^-6 mol L^-1 was obtained using both Lineweaver-Burk and Eadi-Hofstee methods.

Superior removal of Hg (II) ions from wastewater using hierarchically porous, functionalized carbon

The removal of heavy metal ions from industrial wastewater by adsorption has been central to the environment for decades, where common adsorbent materials are often limited by poor efficiency, complex fabrication and long processing time. Porous carbon derived from biospecies holds promise to address the limitations. In this study we converted bagasse into a carbon composite having hierarchically porous structure; the composite's dispersion phases - iron oxide and manganese oxide - were synthesized by a simple one-step liquid-phase reaction method. Featuring large specific surface area of 350.8 m² g^-1, the composite demonstrated exceptional Hg (II) removal efficiency of 96.8%, adsorption rate of up to 96.8% within 150 min and adsorption capacity of 9.8 mg g^-1. In comparison with other removal materials, our work is outstanding in terms of both removal efficiency and synthesis simplicity. The high efficiency is attributed to the synergy between physical adsorption referring to hierarchically porous structure and chemical adsorption relating to functional complexation processes. It provides a new avenue for the development of high-performance adsorbent materials for heavy metal removal from aqueous media.

Preparation of various thiol-functionalized carbon-based materials for enhanced removal of mercury from aqueous solution

In this work, biochar (BC), activated carbon (AC), and graphene oxide (GO) were thiol-functionalized using 3-mercaptopropyltrimethoxysilane (3-MPTS) (named as BCS, ACS, and GOS, respectively). BCS, ACS, and GOS were synthesized mainly via the interaction between hydrolyzed 3-MPTS and surface oxygen-containing functional groups (e.g., -OH, O-C=O, and C=O) and π-π interaction. The materials before and after modification were characterized and tested for mercury removal, including sorption kinetics and isotherms, the effects of adsorbent dosage, initial pH, and ionic strength. Pseudo-second-order sorption kinetic model (R² = 0.992~1.000) and Langmuir sorption isotherm model (R² = 0.964~0.998) fitted well with the sorption data of mercury. GOS had the most -SH groups with the largest adsorption capacity for Hg²⁺ and CH₃Hg⁺ (449.6 and 127.5 mg/g), followed by ACS (235.7 and 86.7 mg/g) and BCS (175.6 and 30.3 mg/g), which were much larger than GO (96.7 and 4.9 mg/g), AC (81.1 and 24.6 mg/g), and BC (95.6 and 9.4 mg/g). GOS and ACS showed stable mercury adsorption properties at a wide pH range (2~9) and ionic strength (0.01~0.1 mol/L). Mercury maybe removed by ligand exchange, surface complexation, and electrostatic attraction.

Graphene-derived nanomaterials as recognition elements for electrochemical determination of heavy metal ions: a review

This review (with 155 refs.) summarizes the progress made in the past few years in the field of electrochemical sensors based on graphene-derived materials for the determination of heavy metal ions. Following an introduction of this field and a discussion of the various kinds of modified graphenes including graphene oxide and reduced graphene oxide, the review covers graphene based electrodes modified (or doped) with (a) heteroatoms, (b) metal nanoparticles, (c) metal oxides, (d) small organic molecules, (e) polymers, and (f) ternary nanocomposites. Tables are provided that afford an overview of representative methods and materials for fabricating electrochemical sensors. Furthermore, sensing mechanisms are discussed. A concluding section presents new perspectives, opportunities and current challenges. Graphical Abstract Schematic illustration of electrochemical sensor for heavy metal ion sensing based on heteroatom-doped graphene, metal-modified graphene, metal-oxide-modified graphene, organically modified graphene, polymer-modified graphene, and ternary graphene based nanocomposites.

Recent developments in the synthesis and applications of graphene-family materials functionalized with cyclodextrins

The introduction of cyclodextrin species to graphene-family materials (GFMs) constitutes an important area of research, especially in terms of the development of applied nanoscience. The chemistry of cyclodextrins is the so-called host-guest chemistry, which has impacted on many fields of research, including catalysis, electrochemistry and nanomedicine. Cyclodextrins are water-soluble and biocompatible supramolecules, and therefore they may introduce new interesting properties to GFMs and may enhance the physicochemical/biological features of native GFMs. The reported methods for the conjugation of cyclodextrins to GFMs utilize either covalent or non-covalent approaches. The recent progress in the applications of GFMs functionalized with cyclodextrins, with the respect to the chemistry and features of these conjugates, is discussed. Special consideration is also given to the recent developments in (i) nanomedicine, (ii) electrochemistry, (iii) adsorption and (iv) catalysis. Examples of these materials are discussed in this work, together with the future outlook on the impact of GFM-cyclodextrin conjugates in the development of applied nanoscience.

Synthesis and characterization of an iron-impregnated biochar for aqueous arsenic removal

The iron (Fe)-impregnated biochar (FBC), fabricated via thermal pyrolysis of corn straw treated with FeCl₃, was investigated for the sorption characteristics and mechanisms of aqueous arsenate removal. Structural and morphological analysis showed that large quantity of iron oxide particles tightly grew within the porous matrix of biochar (BC) through iron-impregnation. Batch sorption experimental results showed that the composite, with larger surface area, more functional groups, and greater thermal stability, exhibited excellent As(V) adsorption efficiency of 6.80mg/g compared to 0.017mg/g for unmodified BC (a 400-fold increase). The adsorption kinetics data were fitted well by pseudo second-order model, and sorption isotherms of As(V) were simulated well by both Freundlich and Langmuir models. XRD and FTIR analysis suggested that electrostatic attraction and precipitation were dominant mechanisms for As(V) sorption. The As(V)-loaded FBC could be easily separated from the solution by a magnet at the end of the sorption experiment. The FBC showed excellent re-sorption capacity, which account for about 70% removal efficiency for the second and third reuse in As(V) sorption. Results from this study demonstrated the promise of FBC composite as an efficient, low-cost, environmentally friendly, and regenerable adsorbent for As(V) remediation.

CAPSULE

FBC showed enhanced As(V) sorption capacity, excellent re-sorption capacity, and could be easily separated by a magnet.

How cutting-edge technologies impact the design of electrochemical (bio)sensors for environmental analysis. A review

Through the years, scientists have developed cutting-edge technologies to make (bio)sensors more convenient for environmental analytical purposes. Technological advancements in the fields of material science, rational design, microfluidics, and sensor printing, have radically shaped biosensor technology, which is even more evident in the continuous development of sensing systems for the monitoring of hazardous chemicals. These efforts will be crucial in solving some of the problems constraining biosensors to reach real environmental applications, such as continuous analyses in field by means of multi-analyte portable devices. This review (with 203 refs.) covers the progress between 2010 and 2015 in the field of technologies enabling biosensor applications in environmental analysis, including i) printing technology, ii) nanomaterial technology, iii) nanomotors, iv) biomimetic design, and (v) microfluidics. Next section describes futuristic cutting-edge technologies that are gaining momentum in recent years, which furnish highly innovative aspects to biosensing devices.

Protic salt-based nitrogen-doped mesoporous carbon for simultaneous electrochemical detection of Cd(ii) and Pb(ii)

Nitrogen-doped mesoporous carbon (NMC) derived from a single small-molecule protic salt (p-phenylenediamine bisulfate) is used for sensing toxic heavy metal ions.

Cadmium Removal from Aqueous Solution by a Deionization Supercapacitor with a Birnessite Electrode

Birnessite is widely used as an excellent adsorbent for heavy metal ions and as active electrode materials for supercapacitors. The occurrence of redox reactions of manganese oxides is usually accompanied by the intercalation-deintercalation of cations during the charge-discharge processes of supercapacitors. In this study, based on the charge-discharge principle of the supercapacitor and excellent adsorption properties of birnessite, a birnessite-based electrode was used to remove Cd²⁺ from aqueous solutions. The Cd²⁺ removal mechanism and the influences of birnessite loading and pH on the removal performance were investigated. The results showed that Cd²⁺ was adsorbed on the surfaces and interlayers of birnessite, and the maximum electrosorption capacity of birnessite for Cd²⁺ was about 900.7 mg g^-1 (8.01 mmol g^-1), which was significantly higher than the adsorption isotherm capacity of birnessite (125.8 mg g^-1). The electrosorption specific capacity of birnessite for Cd²⁺ increased with an increase in initial Cd²⁺ concentration and decreased with an increase in the loading of active birnessite. In the pH range of 3.0-6.0, the electrosorption capacity increased at first with an increase in pH and then reached equilibrium above pH 4.0. This work provides a new method for the highly efficient adsorption of Cd²⁺ from polluted wastewater.

Preparation of a novel graphene oxide/Fe-Mn composite and its application for aqueous Hg(II) removal

A novel graphene oxide/Fe-Mn (GO/Fe-Mn) composite was synthesized (molar ratio of Fe/Mn=3/1 and mass ratio of Fe/GO=1/7.5) and investigated for the sorption characteristics and mechanisms of aqueous mercury (Hg(2+)) as well as the biological effects to wheat and rice. Characterization tests showed that Fe-Mn oxides were impregnated onto GO sheets in an amorphous form through oxygen-containing functional groups (i.e., CO, epoxy COC, carboxyl OCO, and CO) and π-π interactions. GO/Fe-Mn possessed large surface area, surface enhanced Raman scattering with more sp(3) defects, and greater thermal stability than GO. XPS analysis revealed that Fe2O3, FeOOH, MnO2, MnOOH, and MnO were the dominant metal oxides in GO/Fe-Mn. Pseudo-second-order kinetic model and Sips isotherm model fitted well with the sorption kinetic and isotherm data. The maximum sorption capacity for mercury was 32.9mg/g. Ligand exchange and surface complexation were the dominant mechanisms for mercury removal. GO/Fe-Mn greatly reduced the bioavailability of mercury to wheat and rice, even promoted the seedling growth. This work suggests that GO/Fe-Mn can be used as an effective and environmental-friendly adsorbent in heavy metal remediation.

Cooperative cathode electrode and in situ deposited copper for subsequent enhanced Cd(II) removal and hydrogen evolution in bioelectrochemical systems

Bioelectrochemical systems (BESs) were first operated in microbial fuel cell mode for recovering Cu(II), and then shifted to microbial electrolysis cells for Cd(II) reduction on the same cathodes of titanium sheet (TS), nickel foam (NF) or carbon cloth (CC). Cu(II) reduction was similar to all materials (4.79-4.88mg/Lh) whereas CC exhibited the best Cd(II) reduction (5.86±0.25mg/Lh) and hydrogen evolution (0.35±0.07m(3)/m(3)d), followed by TS (5.27±0.43mg/Lh and 0.15±0.02m(3)/m(3)d) and NF (4.96±0.48mg/Lh and 0.80±0.07m(3)/m(3)d). These values were higher than no copper controls by factors of 2.0 and 5.0 (TS), 4.2 and 2.0 (NF), and 1.8 and 7.0 (CC). These results demonstrated cooperative cathode electrode and in situ deposited copper for subsequent enhanced Cd(II) reduction and hydrogen production in BESs, providing an alternative approach for efficiently remediating Cu(II) and Cd(II) co-contamination with simultaneous hydrogen production.

Simultaneous determination of Cd(II) and Cu(II) using stripping voltammetry in groundwater, soil and Alhagi maurorum plants in industrial and urban areas in Northern Border, Saudi Arabia with luminol as a chelating agent

The cathodic stripping voltammetry of Cu(II) and Cd(II) speciation was re-optimized by using luminol (Lu) in groundwater, soil and Alhagi maurorum plants, finding differences with the pre-existing method and a different interpretation for the electroactive species. The main findings are that optimum sensitivity is obtained at 0.3-142.5 ng/mL and 0.065-60.0 ng/mL for copper and cadmium, respectively, that the complexes responsible for adsorption on the electrode are CuLu and CdLu, and that the sensitivity of the method is much improved in the absence of dissolved oxygen. The limit of detection of the method was 0.011 ± 0.001 ng/mL for Cu(II) and 0.013 ± 0.001 ng/mL for Cd(II). The interference of some common ions: Cr(III), Fe(III), Zn(II), Ni(II), Co(II) and Mo(II) was studied. It was concluded that application of this method for the determination of Cu(II) and Cd(II) in groundwater, soil and Alhagi maurorum plants led to satisfactory results.