Determination of methyl parathion by a molecularly imprinted sensor based on nitrogen doped graphene sheets

Electrochemical Synthesis of Molecularly Imprinted Polymers for L-Tyrosine Detection

L-Tyrosine (L-Tyr), a critical amino acid whose aberrant levels impact melanin and dopamine levels in human body while also increasing insulin resistance thereby increasing the risk of type 2 diabetes. The objective of this study was to detect the amount of L-Tyr in human fluids by tailored electrochemical synthesis of well adhered, homogenous and thin molecularly imprinted polymers (MIPs) by the electro-polymerization of pyrrole on glassy carbon electrode modified functionalized multi-walled carbon nanotubes. The key benefits of this procedure over previous imprinting techniques were the elimination of expensive materials like Au and tedious multi-step synthesis, for L-Tyr detection using a handheld potentiostat. The developed particles were characterized using Fourier Transform Infrared Spectroscopy, Scanning Electron Microscope, Chronoamperometry, and Cyclic Voltammetry. With strong reproducibility and stability, this optimized approach provides a rapid and effective method of preparing and sensing MIPs for the target analyte with a broad linear range of [Formula: see text] to [Formula: see text]. The Limit of Detection and Limit of Quantification were [Formula: see text] and [Formula: see text], respectively. The engineered sensor was validated for quantifying the concentrations of L-Tyr in human blood and serum samples, yielding satisfactory recovery and can be expanded in future to detect analytes simultaneous.

Reaction mechanism and detecting properties of a novel molecularly imprinted electrochemical sensor for microcystin based on three-dimensional AuNPs@MWCNTs/GQDs

Microcystins with leucine arginine (MC-LR) is a virulent hepatotoxin, which is commonly present in polluted water with its demethylated derivatives [Dha7] MC-LR. This study reported a low-cost molecularly imprinted polymer network-based electrochemical sensor for detecting MC-LR. The sensor was based on a three-dimensional conductive network composed of multi-walled carbon nanotubes (MWCNTs), graphene quantum dots (GQDs), and gold nanoparticles (AuNPs). The molecularly imprinted polymer was engineered by quantum chemical computation utilizing p-aminothiophenol (p-ATP) and methacrylic acid (MAA) as dual functional monomers and L-arginine as a segment template. The electrochemical reaction mechanism of MC-LR on the sensor was studied for the first time, which is an irreversible electrochemical oxidation reaction involving an electron and two protons, and is controlled by a mixed adsorption-diffusion mechanism. The sensor exhibited a great detection response to MC-LR in the linear range of 0.08-2 μg/L, and the limit of detection (LOD) is 0.0027 μg/L (S/N = 3). In addition, the recoveries of the total amount of MC-LR and [Dha7] MC-LR in the actual sample by the obtained sensor were in the range from 91.4 to 116.7%, which indicated its great potential for environmental detection.

Recent Advances of Enzyme-Free Electrochemical Sensors for Flexible Electronics in the Detection of Organophosphorus Compounds: A Review

Emerging materials integrated into high performance flexible electronics to detect environmental contaminants have received extensive attention worldwide. The accurate detection of widespread organophosphorus (OP) compounds in the environment is crucial due to their high toxicity even at low concentrations, which leads to acute health concerns. Therefore, developing rapid, highly sensitive, reliable, and facile analytical sensing techniques is necessary to monitor environmental, ecological, and food safety risks. Although enzyme-based sensors have better sensitivity, their practical usage is hindered due to their low specificity and stability. Therefore, among various detection methods of OP compounds, this review article focuses on the progress made in the development of enzyme-free electrochemical sensors as an effective nostrum. Further, the novel materials used in these sensors and their properties, synthesis methodologies, sensing strategies, analytical methods, detection limits, and stability are discussed. Finally, this article summarizes potential avenues for future prospective electrochemical sensors and the current challenges of enhancing the performance, stability, and shelf life.

Development of 2D graphene oxide sheets-based voltammetric sensor for electrochemical sensing of fungicide, carbendazim

Incorporating new pollutants and environmental pollution has become a formidable issue as new pollutants are introduced into it and have become a significant concern in recent years. Detection of such pollutants needs a susceptible, selective, and cost-effective sensor that can sense their presence and quantify them at a trace level. In the present study, we have designed a 2D graphene oxide (GO)-based glassy carbon electrode (GCE) electrochemical sensor (GO/GCE) and utilized it as a sensing material for the detection and determination of CRZ. The voltammetric behavior of CRZ was studied using cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. The SWV was applied to quantify and analyze CRZ in actual samples. A better response of CRZ was noticed at GO/GCE when phosphate buffer solution of pH 4.2 was used as a supporting electrolyte for to experiment. The SWV technique achieved trace-level detection of CRZ. A linearity plot was obtained for the concentration range of 1.0 × 10^-7 M to 2.5 × 10^-4 M with a limit of detection of 1.38 × 10^-8 M. The selectivity of the modified sensor was verified by the interference study of metal ions and other pesticides with CRZ. The agricultural and environmental significance of the developed method was successfully tested by estimating CRZ in water and soil samples.

Graphene/g-carbon nitride (GO/g-C3N4) nanohybrids as a sensor material for the detection of methyl parathion and carbendazim

The widespread use of methyl parathion (MP) and carbendazim (CBZ) as pesticide molecules for controlling pests and protect crops has added pollution issues; excess usage of these can lead to atmospheric pollution through contaminating water and soil sources. In the present study, detection of these compounds at the trace level was achieved by employing graphene oxide (GO) and graphitic carbon nitride (g-C₃N₄) nanohybrid electrode assembly (GO/g-C₃N₄/GCE). The X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), and Atomic Force Microscopy (AFM) techniques were also used to characterize the materials developed to reveal their purity, crystal structure, and morphology. The complete voltammetric behavior of these analytes was investigated using cyclic voltammetic (CV) and square wave voltammetry (SWV) techniques. The influence of pH was studied and it was noticed that electrochemical response was the highest at pH 7.0 for MP and at pH 4.2 for CBZ. Density Functional Theory (DFT) calculations could help us to understand the adsorption behavior of MP and CBZ onto the GO and g-C₃N₄ before their degradation due to the electrochemical reactions. SWV technique was helpful in the trace level detection of MP and CBZ. Linearity plots were obtained in the range of concentration from 8.0 × 10^-8 M to 1.0 × 10^-4 M with a limit of detection 0.824 nM for MP and 1.0 × 10^-8 M to 2.5 × 10^-4 M for CBZ with the detection limit of 2.82 nM. Significance of the developed method in the field of agricultural and environmental domains was successfully investigated by monitoring MP and CBZ in water and soil samples, and the obtained results suggested the selectivity, stability, and reproducibility of the newly developed GO/g-C₃N₄/GCE electrode assembly.

Application of Molecularly Imprinted Polymers in the Analysis of Waters and Wastewaters

The increase of the global population and shortage of renewable water resources urges the development of possible remedies to improve the quality and reusability of waste and contaminated water supplies. Different water pollutants, such as heavy metals, dyes, pesticides, endocrine disrupting compounds (EDCs), and pharmaceuticals, are produced through continuous technical and industrial developments that are emerging with the increasing population. Molecularly imprinted polymers (MIPs) represent a class of synthetic receptors that can be produced from different types of polymerization reactions between a target template and functional monomer(s), having functional groups specifically interacting with the template; such interactions can be tailored according to the purpose of designing the polymer and based on the nature of the target compounds. The removal of the template using suitable knocking out agents renders a recognition cavity that can specifically rebind to the target template which is the main mechanism of the applicability of MIPs in electrochemical sensors and as solid phase extraction sorbents. MIPs have unique properties in terms of stability, selectivity, and resistance to acids and bases besides being of low cost and simple to prepare; thus, they are excellent materials to be used for water analysis. The current review represents the different applications of MIPs in the past five years for the detection of different classes of water and wastewater contaminants and possible approaches for future applications.

Graphene oxide@Ce-doped TiO2 nanoparticles as electrocatalyst materials for voltammetric detection of hazardous methyl parathion

A sensitive voltammetric sensor has been developed for hazardous methyl parathion detection (MP) using graphene oxide@Ce-doped TiO₂ nanoparticle (GO@Ce-doped TiO₂ NP) electrocatalyst. The GO@Ce-doped TiO₂ NPs were prepared through the sol-gel method and characterized by various physicochemical and electrochemical techniques. The GO@Ce-doped TiO₂ NP-modified glassy carbon electrode (GCE) addresses excellent electrocatalytic activity towards MP detection for environmental safety and protection. The developed strategy of GO@Ce-doped TiO₂ NPs at GCE surfaces for MP detection achieved excellent sensitivity (2.359 μA μM^-1 cm^-2) and a low detection limit (LOD) 0.0016 μM with a wide linear range (0.002 to 48.327 μM). Moreover, the fabricated sensor shows high selectivity and long-term stability towards MP detection; this significant electrode further paves the way for real-time monitoring of environmental quantitative samples with satisfying recoveries.

Ultrasonic-assisted preparation of halloysite nanotubes/zirconia/carbon black nanocomposite for the highly sensitive determination of methyl parathion

Herein, a cost-effective and scalable ultrasound assisted approach was proposed to prepare the nanocomposite of halloysite nanotubes/zirconia/carbon black (Hal/ZrO₂/CB), which was used to fabricate a novel electrochemical sensor for the highly sensitive determination of methyl parathion (MP). In the Hal/ZrO₂/CB nanocomposite, Hal with large specific surface area and numerous active sites could enhance the adsorption capacity and accelerate the redox reaction of MP; ZrO₂ nanoparticles with high affinity toward the phosphate group could contribute to good recognition performance for MP; CB nanoparticles with good dispersibility formed an interconnected pearl-chain-like conductive network. Benefitting from the synergistic effect of the three components, the Hal/ZrO₂/CB/GCE (glassy carbon electrode) sensor showed a remarkably low detection limit of 5.23 nM in a good linear MP detection range of 0.01-10 μM. The Hal/ZrO₂/CB/GCE sensor possessed a pretty decent practicality with satisfactory RSD and recovery results for the determination of MP in peach, pear, and apple juices. Therefore, the Hal/ZrO₂/CB/GCE sensor has important implication on the quite sensitive detection of MP.

Cloud-point extraction associated with voltammetry: preconcentration and elimination of the sample matrix for trace determination of methyl parathion in honey

This work presents the association of cloud point extraction (CPE) and electroanalysis for the selective and sensitive determination of methyl parathion (MP) in honey. The CPE step provided the pre-concentration of MP from a complex sample, in which the optimized extraction parameters (Triton X-100 concentration of 0.75% w/v, NaCl concentration of 1.0% w/v and heating time of 30 min) were investigated using a factorial design (23). The detection of MP was performed using a cathodically pre-treated boron-doped diamond (BDD) working electrode and square wave voltammetry (SWV), after a suitable dilution of the CPE extract in Britton-Robinson buffer pH 6.0 as the supporting electrolyte. MP presented three electrochemical processes over the BDD surface, but only the reduction peak at around -0.7 V was monitored for the MP determination (higher detectability). Improved reproducibility was reached by applying an in situ cleaning step (+2.0 V for 15 s) followed by a re-activation process (-2.0 V for 15 s) between measurements. Using the optimized variables, a linear range between 0.1 and 2.0 μmol L-1 was obtained for MP with a limit of detection of 0.006 μmol L-1, a 6-fold lower value when compared with the value attained without the CPE step. The experimental enrichment factor of MP was 6.1. Also, the optimized CPE allowed the determination of MP in honey samples with good accuracy (recovery between 94 and 106%), which was not possible using direct detection (without CPE) due to the matrix interference. This is the first paper that demonstrates the combination of CPE and electroanalysis for the determination of an organic compound.

Advancements of chiral molecularly imprinted polymers in separation and sensor fields: A review of the last decade

Since chiral recognition mechanism based on molecularly imprinted polymers immerged, it has assisted countless chemical and electrochemical analytical sample preparation techniques. It has done this by enhancing the enatioseparation abilities of these techniques. The preparation and optimization of chiral molecularly imprinted polymers (CMIPs) are two favored methods in the separation and sensor fields. This review aims to present an overview of advances in the preparation and application of CMIPs in analytical approaches in different available formats (eg. column, monolithic column, cartridge, membrane, nanomaterials, pipette tip and stir bar sorptive) over the last decade. In addition, progress in the preparation and development of CMIPs-based sensor fields have been also discussed. Finally, the main application challenges of CMIPs are also summarily explained, as well as upcoming prospects in the field.

Molecularly imprinted polymer-based electrochemical sensors for environmental analysis

The ever-increasing presence of contaminants in environmental waters is an alarming issue, not only because of their harmful effects in the environment but also because of their risk to human health. Pharmaceuticals and pesticides, among other compounds of daily use, such as personal care products or plasticisers, are being released into water bodies. This release mainly occurs through wastewater since the treatments applied in many wastewater treatment plants are not able to completely remove these substances. Therefore, the analysis of these contaminants is essential but this is difficult due to the great variety of contaminating substances. Facing this analytical challenge, electrochemical sensing based on molecularly imprinted polymers (MIPs) has become an interesting field for environmental monitoring. Benefiting from their superior chemical and physical stability, low-cost production, high selectivity and rapid response, MIPs combined with miniaturized electrochemical transducers offer the possibility to detect target analytes in-situ. In most reports, the construction of these sensors include nanomaterials to improve their analytical characteristics, especially their sensitivity. Moreover, these sensors have been successfully applied in real water samples without the need of laborious pre-treatment steps. This review provides a general overview of electrochemical MIP-based sensors that have been reported for the detection of pharmaceuticals, pesticides, heavy metals and other contaminants in water samples in the past decade. Special attention is given to the construction of the sensors, including different functional monomers, sensing platforms and materials employed to achieve the best sensitivity. Additionally, several parameters, such as the limit of detection, the linear concentration range and the type of water samples that were analysed are compiled.

Recent advances in two-dimensional-material-based sensing technology toward health and environmental monitoring applications

Monitoring harmful and toxic chemicals, gases, microorganisms, and radiation has been a challenge to the scientific community for the betterment of human health and environment. Two-dimensional (2D)-material-based sensors are highly efficient and compatible with modern fabrication technology, which yield data that can be proficiently used for health and environmental monitoring. Graphene and its oxides, black phosphorus (BP), transition metal dichalcogenides (TMDCs), metal oxides, and other 2D nanomaterials have demonstrated properties that have been alluring for the manufacture of highly sensitive sensors due to their unique material properties arising from their inherent structures. This review summarizes the properties of 2D nanomaterials that can provide a platform to develop high-performance sensors. In this review, we have also discussed the advances made in the field of infrared photodetectors and electrochemical sensors and how the structural properties of 2D nanomaterials affect sensitivity and performance. Further, this review highlights 2D-nanomaterial-based electrochemical sensors that can be used to check for contaminations from heavy metals, organic/inorganic compounds, poisonous gases, pesticides, bacteria, antibiotics, etc., in water or air, which are severe risks to human wellbeing as well as the environment. Moreover, the limitations, future prospects, and challenges for the development of sensors based on 2D materials are also discussed for future advancements.

Three-dimensional zinc oxide nanostars anchored on graphene oxide for voltammetric determination of methyl parathion

The two-step microwave method was used to synthesize zinc oxide nanostars linked to graphene oxide (GO) nanosheets. The material was used to modify a screen printed carbon electrode (SPCE) and then explored as a binder-free electrocatalyst for the electrochemical determination of methyl parathion (MP). The morphology and crystallinity of the material were characterized by various techniques. The modified SPCE shows extraordinary electrochemical performances for sensitive determination of MP. Figures of merit include (a) a wide linear dynamic range (0.03-670 μM), (b) a low detection limit (1.2 nM; at S/N = 3), (c) a comparably low working voltage (-0.69 V vs. Ag/AgCl); and (d) an excellent sensitivity (16.5 μA μM^-1 cm^-2) that surpasses other modified electrodes. The sensor was successfully applied to the determination of MP, even in the presence of other common electroactive interference, in (spiked) fruits and vegetables. Graphical abstractGraphene oxide anchored three-dimensional zinc oxide nanostars were used to coat electrode for the sensing of methyl parathion (MP) by voltammetry.

Catalytic Chemosensing Assay for Selective Detection of Methyl Parathion Organophosphate Pesticide

Herein, a catalytic chemosensing assay (CCA), based on a bimetallic complex, [Ru^II (bpy)₂ (CN)₂ ]₂ (Cu^I I)₂ (bpy=2,2'-bipyridine), is described. This complex integrates a task-specific catalyst (Cu^I -catalyst) and a signaling unit ([Ru^II (bpy)₂ (CN)₂ ]) to specifically hydrolyze methyl parathion, a highly toxic organophosphate (OP) pesticide. The bimetallic complex catalyzed the hydrolysis of the phosphate ester to generate o,o-dimethyl thiophosphate (DTP) anion and 4-nitrophenolate. Intrinsically, 4-nitrophenolate absorbed UV/Vis light at λ_max =400 nm, creating the first level of the chemosensing signal. DTP interacted with the original complex to displace the chromophore, [Ru^II (bpy)₂ (CN)₂ ], which was monitored by spectrofluorometry; this was classified as the second level of chemosensing signal. By integrating both spectroscopic and spectrofluorometric signals with a simple AND logic gate, only methyl parathion was able to provide a positive response. Other aromatic and aliphatic OP pesticides (diazinon, fenthion, meviphos, terbufos, and phosalone) and 4-nitrophenyl acetate provided negative responses. Furthermore, owing to the metal-catalyzed hydrolysis of methyl parathion, the CCA system led to the detoxification of the pesticide. The CCA system also demonstrated its catalytic chemosensing properties in the detection of methyl parathion in real samples, including tap water, river water, and underground water.

Electrochemical co-deposition synthesis of Au-ZrO2-graphene nanocomposite for a nonenzymatic methyl parathion sensor

For the first time, a simple electrochemical co-deposition was utilized to synthesis the gold and zirconia nanocomposites modified graphene nanosheets on glassy carbon electrode (Au-ZrO₂-GNs/GCE) for electrocatalytic analysis of methyl parathion (MP). According to Field-Emission Scanning Electron Microscopy (FE-SEM), Transmission Electronic Microscopy (TEM) and X-Ray Diffraction (XRD), the gold nanoparticles were uniformly distributed on the surface of graphene-based nanocomposite. The Au-ZrO₂-GNs/GCE based sensor exhibited superior capacity for MP detection, ascribed to the strong affinity of zirconia towards the phosphoric group, as well as the high catalytic activity and good conductivity of Au-GNs. The best fabrication and work conditions were then obtained by systematically optimization of the electrodeposition process, pH value and enrichment time. Compared to the gold nanoparticles, zirconia or graphene modified electrodes, AuZrO₂-GNs/GCE sensor displayed superior electro-catalytic response toward MP oxidation. The sensor response current of square wave voltammetry was highly linearly correlated with the MP concentrations range of 1-100 ng mL^-1 and 100-2400 ng mL^-1 with the detection limit of 1 ng mL^-1. The Au-ZrO₂-GNs/GCE nanocomposite sensor showed excellent accuracy and reproducibility for detection of MP in Chinese cabbage samples, providing a new method for efficient pesticide detection in practical applications.

Paper Based Photoluminescent Sensing Platform with Recognition Sites for Tributyltin

In this study, a novel photoluminescence material for the detection of tributyltin (TBT) was developed by using a paper-based nanocomposite system. For this purpose, molecularly imprinted polymeric nanoparticles (MIN) were synthesized with mini-emulsion polymerization technique. Graphene quantum dots obtained by the hydrothermal pyrolysis were immobilized to the nanoparticle surface via EDC-NHS coupling. The fabrication of sensing platform for TBT can be divided into two steps that are the preparation of nanocomposite and the applying the nanocomposite onto nitrocellulose membrane. The selectivity constant and association kinetics were calculated to analyze the interaction of TBT with immobilized MINs. The results proved that the developed nanosensor is promising for the determination of TBT with high selectivity and sensitivity reaching a detection limit of 0.23 ppt in seawater. This novel photoluminescent nanosensor has the potential to pave the way for further studies and applications.

Electrochemical sensing of methyl parathion on magnetic molecularly imprinted polymer

The electrochemical detection of methyl parathion in fish was performed by preconcentrating the pesticide on magnetic molecularly imprinted polymer and further readout on magneto-actuated electrode by square wave voltammetry. The magnetic molecularly imprinted polymer was synthesized by a magnetic core-shell strategy, using methacrylic acid as a functional monomer, and selected by theoretical calculation using the density functional theory (DFT). The characterization of this material was performed by SEM, TEM and XRD. Moreover, the binding capacity and selectivity towards methyl parathion was studied and compared with the corresponding magnetic non-imprinted polymer. The magneto-actuated electrochemical sensor showed outstanding analytical performance for the detection of methyl parathion in fish, with a limit of detection of as low as 1.22 × 10^-6 mg L^-1 and recovery values ranging from 89.4% to 94.7%. The magnetic molecularly imprinted polymer successfully preconcentrated the analyte from the complex samples and paves the way to incorporate this material in other platforms for the detection of this pesticide in the field of environmental control and food safety.

A novel and high performance enzyme-less sensing layer for electrochemical detection of methyl parathion based on BSA templated Au–Ag bimetallic nanoclusters

In the present manuscript, a modified glassy carbon electrode with BSA templated Au–Ag bimetallic nanoclusters (Au–Ag@BSA/GCE) was employed for the rapid, selective and sensitive determination of methyl parathion (MP) as an enzyme-less electrochemical biosensor.

Surface Molecularly Imprinted Polymer Film with Poly(p-aminothiophenol) Outer Layer Coated on Gold Nanoparticles Inner Layer for Highly Sensitive and Selective Sensing Paraoxon

This paper presents the fabrication of a molecularly imprinted, polymer-based disposable electrochemical sensor for paraoxon (PO) determination. The sensor was based on a screen-printed carbon electrode (SPCE) modified with a surface molecularly imprinted poly (p-aminothiophenol) (PATP)/gold nanoparticles (AuNPs) composite film, which consisted of a PATP outer layer and an AuNPs inner layer. We report a novel strategy, combining surface molecularly imprinting and self-assembly directed electro-polymerization with high densely imprinting PO molecules in the PATP/AuNPs film. Firstly, AuNPs were in situ electrodeposited at the electrode surface, and then assembled with electropolmerizable functional monomer p-aminothiophenol (ATP). Subsequently, PO molecules were assembled onto the ATP monolayer-modified AuNPs, forming a basis of surface molecular imprinting. After that, replenished PO molecules were embedded in the PATP/AuNPs film by PO and the ATP molecular self-assembly directed electro-polymerization in the polymerization precursor mixture. The resulting imprinted PATP/AuNPs/SPCE possesses high sensitivity, affinity, and selectivity toward PO, with a low detection limit of 1 × 10-9 M. The proposed sensor was successfully applied for the determination of PO in fruit and vegetables, giving satisfactory recoveries. The strategy reported herein can be further expected to fabricate various molecular imprinted sensors for the determination of other pesticide residuals.

MIP-MEPS based sensing strategy for the selective assay of dimethoate. Application to wheat flour samples

The aim of this work was to demonstrate the potentialities of the use of a molecularly imprinted (MIP) sensor coupled to a microextraction by packed sorbent (MEPS) strategy for the selective and sensitive detection of dimethoate in real samples. A dimethoate-polypyrrole MIP film was realised by cyclic voltammetry (CV) on the surface of a glassy carbon electrode (GCE). Being dimethoate electro-inactive, K₃[Fe(CN)₆] was used as probe for the indirect quantification of the analyte via the decrease of redox peaks observed upon binding of the target analyte. Detection of dimethoate at low nanomolar range was achieved with linearity in the 0.1-1nM range. Relative standard deviation calculated for different electrodes at 0.5nM of dimethoate was < 3% and selectivity was very satisfactory being the response for omethoate only 23% of dimethoate. A MEPS strategy for the extraction of dimethoate from a challenging matrix as wheat flour was then used in conjunction with the MIP electrochemical sensor. The procedure applied to flour samples spiked with dimethoate at 0.5 MRL, MRL, and 1.5 MRL gave very favourable comparison with a validated UHPLC-MS/MS method with deviations in the -21% /+17% range, demonstrating the feasibility of the approach as screening assay. This work clearly shows that the sequential use of a microextraction based procedure and electrochemical sensing system is low cost, easy to realise and use and can open new perspectives for the development of selective sensing system to be used in field or decentralised lab testing for the selective screening of target analytes.

Methyl parathion detection in vegetables and fruits using silver@graphene nanoribbons nanocomposite modified screen printed electrode

We have developed a sensitive electrochemical sensor for Organophosphorus pesticide methyl parathion (MP) using silver particles supported graphene nanoribbons (Ag@GNRs). The Ag@GNRs nanocomposite was prepared through facile wet chemical strategy and characterized by TEM, EDX, XRD, Raman, UV-visible, electrochemical and impedance spectroscopies. The Ag@GNRs film modified screen printed carbon electrode (SPCE) delivers excellent electrocatalytic ability to the reduction of MP. The Ag@GNRs/SPCE detects sub-nanomolar concentrations of MP with excellent selectivity. The synergic effects between special electrocatalytic ability of Ag and excellent physicochemical properties of GNRs (large surface area, high conductivity, high area-normalized edge-plane structures and abundant catalytic sites) make the composite highly suitable for MP sensing. Most importantly, the method is successfully demonstrated in vegetables and fruits which revealed its potential real-time applicability in food analysis.

Introduction of selectivity and specificity to graphene using an inimitable combination of molecular imprinting and nanotechnology

Recently, the nanostructured modified molecularly imprinting polymer has created a great attention in research field due to its excellent properties such as high surface to volume ratio, low cost, and easy preparation/handling. Among the nanostructured materials, the carbonaceous material such as 'graphene' has attracted the tremendous attention of researchers owing to their fascinating electrical, thermal and physical properties. In this review article, we have tried to explore as well as compile the role of graphene-based nanomaterials in the fabrication of imprinted polymers. In other words, herein the recent efforts made to introduce selectivity in graphene-based nanomaterials were tried collected together. The major concern of this review article is focused on the sensing devices fabricated via a combination of graphene, graphene@nanoparticles, graphene@carbon nanotubes and molecularly imprinted polymers. Additionally, the combination of graphene and quantum dots was also included to explore the fluorescence properties of zero-band-gap graphene.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.

Facile and sensitive electrochemical detection of methyl parathion based on a sensing platform constructed by the direct growth of carbon nanotubes on carbon paper

Facile and sensitive methyl parathion detection was achieved based on a novel carbon nanotube/carbon paper sensor.