Cd doped porous Co3O4 nanosheets as electrode material for high performance supercapacitor application

Yelamaggad C. Affordable Two-Dimensional Layered Cd(II) Coordination Polymer: High-Performance Pseudocapacitor Electrode Behavior

In recent years, pseudocapacitive materials have been investigated rigorously as they provide a unique pathway for realizing high-energy and high-power densities. However, innovative approaches involving rational design and synthesis of new materials are still vital to address concerns such as degradation, low conductivity, low cycling performance, high resistance, production cost, etc. Working in this direction, we report the cost-effective synthesis, characterization, and excellent pseudocapacitive behavior of a Cd(II)-based coordination polymer (COP) abbreviated as Cd(DAB). It has been realized in quantitative yield through a facile one-pot reaction occurring among the N4-ligand, 3,3'-diaminobenzidine (DAB), and Cd(II) ions, derived from Cd(OAc)2·2H2O, at room temperature. The proposed structure of the COP was ascertained by subjecting it to various standard spectroscopic and electron microscopic studies; these techniques reveal the self-assembly of indefinitely long coordination strands into a two-dimensional (2D) layered structure. The electrochemical performance of Cd(DAB) was evaluated as an electrode material for supercapacitors. Owing to its high conductivity, it portrayed remarkable energy storage (pseudocapacitor) behavior; it exhibited a high specific capacitance of 1341.6 F g-1 and a long cycle life with 81% retention over 10,000 cycles at 20 A g-1. Additionally, an asymmetrical supercapacitor device was fabricated, which exhibited a specific capacitance of 428.5 F g-1 at a current density of 1 A g-1.

Ag doped Co3O4 nanoparticles for high-performance supercapacitor application

Ag doped Co₃O₄ nanoparticles (NPs) were synthesized via a co-precipitation method changing the concentration of Ag. The crystal structure, morphology, surface area, functional group, optical band gap, and thermal property were investigated by XRD, SEM, BET, FTIR, UV-Vis, and TGA/DTA techniques. The XRD results showed the formation of single-cubic Co₃O₄ nanostructured materials with an average crystal size of 19.37 nm and 12.98 nm for pristine Co₃O₄ and 0.25 M Ag-doped Co₃O₄ NPs. Morphological studies showed that pristine Co₃O₄ and 0.25 M Ag-doped Co₃O₄ NPs having a porous structure with small spherical grains, porous structures with sponge-like structures, and loosely packed porous structures, respectively. The pristine and 0.25 M Ag-doped Co₃O₄ NPs showed BET surface areas of 53.06 m²/g, and 407.33 m²/g, respectively. The band gap energy of Co₃O₄ NPs were 2.96 eV, with additional sub-bandgap energy of 1.95 eV. Additionally, it was discovered that the band gap energies of 0.25 M Ag-doped Co₃O₄ NPs ranged from 2.2 to 2.75 eV, with an extra sub-band with energies ranging from 1.43 to 1.94 eV for all as-prepared samples. The Ag-doped Co₃O₄ as prepared samples show improved thermal properties due to the doping effect of silver. The CV test confirmed that the 0.25 M Ag-doped Co₃O₄ NPs exhibited the highest specific capacitance value of 992.7 F/g at 5 mV/s in a 0.1 M KOH electrolyte solution. The energy density and power density of 0.25 M Ag-doped Co₃O₄ NPs were 27.9 W h/kg and 3816.1 W/kg, respectively.

High-performance asymmetric supercapacitor based on a CdCO3/CdO/Co3O4 composite supported on Ni foam – part II: a three-electrode electrochemical study†

A binder-free CdCO₃/CdO/Co₃O₄ compound with a micro-cube-like morphology on a nickel foam (NF) made via a facile two-step hydrothermal + annealing procedure has been developed. The morphological, structural and electrochemical behavior of both the single compounds constituting this final product and the final product itself has been studied. The synergistic contribution effect of the single compounds in the final compounded resulting specific capacitance values are presented and discussed. The CdCO₃/CdO/Co₃O₄@NF electrode exhibits excellent supercapacitive performance with a high specific capacitance (C_S) of 1.759 × 10³ F g⁻¹ at a current density of 1 mA cm⁻² and a C_S value of 792.3 F g⁻¹ at a current density of 50 mA cm⁻² with a very good rate capability. The CdCO₃/CdO/Co₃O₄@NF electrode also demonstrates a high coulombic efficiency of 96% at a current density as high as 50 mA cm⁻² and also exhibits a good cycle stability with capacitance retention of ca. 100% after 1000 cycles at a current density of 10 mA cm⁻² along with a potential window of 0.4 V. The obtained results suggest that the facilely synthesized CdCO₃/CdO/Co₃O₄ compound has great potential in high-performance electrochemical supercapacitor devices.

Schematic illustration of the two-step process involved in the preparation of the different chemical compounds supported on the nickel foam substrates.

Electrochemical Performance of Iron-Doped Cobalt Oxide Hierarchical Nanostructure

In this study, hydrothermally produced Fe-doped Co3O4 nanostructured particles are investigated as electrocatalysts for the water-splitting process and electrode materials for supercapacitor devices. The results of the experiments demonstrated that the surface area, specific capacitance, and electrochemical performance of Co3O4 are all influenced by Fe3+ content. The FexCo3-xO4 with x = 1 sample exhibits a higher BET surface (87.45 m2/g) than that of the pristine Co3O4 (59.4 m2/g). Electrochemical measurements of the electrode carried out in 3 M KOH reveal a high specific capacitance of 153 F/g at a current density of 1 A/g for x = 0.6 and 684 F/g at a 2 mV/s scan rate for x = 1.0 samples. In terms of electrocatalytic performance, the electrode (x = 1.0) displayed a low overpotential of 266 mV (at a current density of 10 mA/cm2) along with 52 mV/dec Tafel slopes in the oxygen evolution reaction. Additionally, the overpotential of 132 mV (at a current density of 10 mA/cm2) and 109 mV with 52 mV/dec Tafel slope were obtained for x = 0.6 sample towards hydrogen evolution reaction (HER). According to electrochemical impedance spectroscopy (EIS) measurements and the density functional theory (DFT) study, the addition of Fe3+ increased the conductivity at the electrode–electrolyte interface, which substantially impacted the high activity of the iron-doped cobalt oxide. The electrochemical results revealed that the mesoporous Fe-doped Co3O4 nanostructure could be used as potential electrode material in the high-performance electrochemical capacitor and water-splitting catalysts.

Mo-doped Co3O4 ultrathin nanosheet arrays anchored on nickel foam as a bi-functional electrode for supercapacitor and overall water splitting

Simple preparation, favorable price and environmental protection have been a long-term challenge in the field of electrochemistry. Herein, we studied and prepared a bifunctional Mo-doped Co₃O₄ ultrathin nanosheets, which has been validated as an effective binder-free electrode material for electrocatalytic water splitting and supercapacitors. The material has a large specific surface area, high electrical conductivity and exposure to more active sites, breaking down the limited performance and range of use of transition metal oxides. Benefiting from intriguing ultrathin property and conductivity, OER and HER process of 0.4Mo-Co₃O₄ have a small Tafel slope of 83.7 and 98 mV dec^-1, respectively. The current density at 10 mA cm^-2 show a low overpotential of 315 and 79 mV and significant stability. The water electrolytic device requires a potential of 1.64 V to reach 10 mA cm^-2, and the potential change is negligible after 12 h of continuous electrolysis. In addition, the manifest improved electrochemical performance of 0.3Mo-Co₃O₄ as supercapacitor electrode material shows high areal capacitance 2815 mF cm^-2 at 1 mA cm^-2, excellent rate performance (85% at 10 mA cm^-2) and retains 90% of the initial capacitance by cycling 5000 at a current density of 10 mA cm^-2. Moreover, 0.3Mo-Co₃O₄||0.3Mo-Co₃O₄ symmetrical supercapacitor has a maximum volumetric energy density of 1.25 mW h cm^-3 at a power density of 7.1 mW cm^-3 and superior cycle life. The influence of doping on electrochemical performance was studied by changing the content of doped metal ions, which is of great significance for the exploration of supercapacitor and electrocatalytic hydrolysis of bifunctional electrode materials.

Green Synthesis of Iron-Doped Cobalt Oxide Nanoparticles from Palm Kernel Oil via Co-Precipitation and Structural Characterization

In this study, a bio-derived precipitating agent/ligand, palm kernel oil, has been used as an alternative route for the green synthesis of nanoparticles of Fe-doped Co3O4 via the co-precipitation reaction. The palm oil was extracted from dried palm kernel seeds by crushing, squeezing and filtration. The reaction of the palm kernel oil with potassium hydroxide, under reflux, yielded a solution containing a mixture of potassium carboxylate and excess hydroxide ions, irrespective of the length of saponification. The as-obtained solution reacts with an aqueous solution containing iron and cobalt ions to yield the desired metallo-organic precursor, iron cobalt carboxylate. Characterization of the precursors by IR and gas chromatography (GC) attests to the presence of carboxylate fatty acids in good agreement with the proportion contained in the oil, and ICP confirms that the metallic ratios are in the proportion used during the synthesis. Analysis of the products thermally decomposed between 400 °C and 600 °C by XRD, EDX, TEM and ToF-SIMS, established that cobalt iron oxide nanoparticles (Co(1-x)Fex)3O4 were obtained for x ≤ 0.2 and a nanocomposite material (Co(1-x)Fex)3O4/Fe3O4 for x ≥ 0.2, with sizes between 22 and 9 nm. ToF-SIMS and XRD provided direct evidence of the progressive substitution of cobalt by iron in the Co3O4 crystal structure for x ≤ 0.2.

The POM@MOF hybrid derived hierarchical hollow Mo/Co bimetal oxides nanocages for efficiently activating peroxymonosulfate to degrade levofloxacin

Herein, we reported the design and fabrication of polyoxometalates coupling metal-organic framework (POM@MOF) hybrids derived hierarchical hollow Mo/Co bimetal oxides nanocages (Mo/Co HHBONs) for the peroxymonosulfate (PMS) activation to degrade levofloxacin (Lev). The Mo/Co HHBONs are hollow nanocages with high specific-surface areas and hierarchical micropores, mesopores, and macropores. In addition to compositional modulation, polyoxometalate (H₃PMo₁₂O₄₀·nH₂O) exhibited striking effect on the textural properties of Mo/Co HHBONs. The Mo/Co HHBONs had outstanding catalytic activity with first order-kinetics that were 6 - 10 times higher those previously reported. They exhibited good adaptability over a pH range of 3 - 11, as well as excellent universality and reusability. By altering the surface porosity, electronic structure, and oxygen vacancies of Co₃O₄, hetero-metal Mo doping induced Mo/Co HHBONs significantly promote the generation of reactive oxygen species, including ^•OH, SO₄^•-, O₂^•-, and ¹O₂. Density functional theory indicated that Mo/Co HHBONs had better adsorption, enhanced electron-transfer abilities, and a longer O-O bond length than did Co₃O₄, for improved catalytic reactivity. This research provides a new strategy to design the POM@MOF hybrids derived hierarchical hollow nanocages with highly PMS activating capacity for the removal of antibiotics and other refractory contaminants.

High-performance asymmetric supercapacitor based on CdCO3/CdO/Co3O4 composite supported on Ni foam

A CdCO₃/CdO/Co₃O₄ composite has been prepared on nickel foam through a combined hydrothermal-annealing method. An asymmetric hybrid supercapacitor (SC) device was assembled with this composite as the positive electrode and activated carbon was the negative electrode. The SC exhibited a high specific capacitance of 84 F g⁻¹ @ 1 mA cm⁻², a maximum energy density of 26.3 W h kg⁻¹, and a power density of 2290 W kg⁻¹, along with a wide potential window of 1.5 V and long cycle life (92% after 6000 cycles). SCs assembled in series powered various light-emitting diodes and moved an electrical mini-motor.

This work presents for the first time a CdCO₃/CdO/Co₃O₄@nickel foam based supercapacitor with high both specific capacitance and energy density, a widespread potential window and a long cycle life.

A novel non-enzymatic glucose electrochemical sensor with high sensitivity and selectivity based on CdIn2O4nanoparticles on 3D Ni foam substrate

Due to the poor conductivity of Fe based, Cu based and Co based electrode materials commonly used in the electrochemical detection of glucose, and the uneven stirring and poor conductivity of the traditional preparation method based on glassy carbon electrode. In order to solve the above problems, in this work, CdIn₂O₄with high electrical conductivity was directly grown on three-dimensional (3D) Ni foam to prepare electrode materials for non-enzymatic glucose sensors. CdIn₂O₄nanoparticles is prepared from cadmium acetate and indium nitrate hydrate in benzyl alcohol by non-aqueous sol-gel method. The electrocatalytic oxidation performances of CdIn₂O₄electrode material for non-enzymatic glucose are studied. The results show that the proposed CdIn₂O₄electrode material has good electrochemical properties and sensing performance for glucose detection. The electrochemical response of CdIn₂O₄electrode material to glucose is recorded that calibration plot for glucose concentrations ranging from 1.0μM to 1.0 mM (R² = 0.99), a limit detection of 0.08μM, an excellent sensitivity of 3.2925 mA.mM^-1.cm^-2, a rapid response time of 1.58 s, a good selectivity and a good long-term stability. These demonstrate the significant potential of CdIn₂O₄electrode material based on 3D Ni foam as non-enzymatic glucose sensors, which makes it possible to use it as a practical glucose detector. This work could introduce a new concept of nanoparticles modified electrode material grown directly on 3D Ni foam, thus a simple and reliable electrochemical glucose sensor platform is realized. This study was completed in 2019 in the school of materials and energy, Yunnan University.

Recent Advance in Co3O4 and Co3O4-Containing Electrode Materials for High-Performance Supercapacitors

Among the popular electrochemical energy storage devices, supercapacitors (SCs) have attracted much attention due to their long cycle life, fast charge and discharge, safety, and reliability. Transition metal oxides are one of the most widely used electrode materials in SCs because of the high specific capacitance. Among various transition metal oxides, Co3O4 and related composites are widely reported in SCs electrodes. In this review, we introduce the synthetic methods of Co3O4, including the hydrothermal/solvothermal method, sol-gel method, thermal decomposition, chemical precipitation, electrodeposition, chemical bath deposition, and the template method. The recent progress of Co3O4-containing electrode materials is summarized in detail, involving Co3O4/carbon, Co3O4/conducting polymer, and Co3O4/metal compound composites. Finally, the current challenges and outlook of Co3O4 and Co3O4-containing composites are put forward.

Study on MnO2/MXene–Ti3C2 composite materials as cathode materials for magnesium batteries

In this paper, MnO₂/MXene–Ti₃C₂ composites with different molar ratios were successfully prepared by a one-step hydro-thermal method, and the optimum proportion was confirmed by XRD and SEM comparative analysis.

Surfactant-assisted synthesis of metallic cadmium, cadmium hydroxide nanostructures and their electrochemical charge storage properties

We report a simple, surfactant-assisted room temperature synthesis of metallic cadmium nanoparticle sheets and their subsequent hydrolysis to the formation of rice-shaped monoclinic cadmium hydroxide nanostructures. These new nanostructures have demonstrated 30-40 fold superior electrochemical charge storage capacity along with quantized double layer charging of metal nanoparticles as compared to the bulk cadmium.

Controllable synthesis of Co3O4 nanocrystals as efficient catalysts for oxygen reduction reaction

The electrochemical oxygen reduction reaction (ORR) has received great attention due to its importance in fuel cells and metal-air batteries. Here, we present a simple approach to prepare non-noble metal catalyst-Co₃O₄ nanocrystals (NCs). The particle size and shape were simply controlled by different types and concentrations of metal precursor. Furthermore, different sizes and shapes of Co₃O₄ NCs are explored as electrocatalysts for ORR, and it has been observed that particles with a similar shape, and smaller particle size led to greater catalytic current densities because of the greater surface area. For particles with a comparable size, the shape or crystalline structure governed the activity of the electrocatalytic reactions. Most importantly, the 9 nm-Co₃O₄ were demonstrated to act as low-cost catalysts for the ORR with a similar performance to that of Pt catalysts.

Spinel Co3O4 nanomaterials for efficient and stable large area carbon-based printed perovskite solar cells

Carbon based perovskite solar cells (PSCs) are fabricated through easily scalable screen printing techniques, using abundant and cheap carbon to replace the hole transport material (HTM) and the gold electrode further reduces costs, and carbon acts as a moisture repellent that helps in maintaining the stability of the underlying perovskite active layer. An inorganic interlayer of spinel cobaltite oxides (Co₃O₄) can greatly enhance the carbon based PSC performance by suppressing charge recombination and extracting holes efficiently. The main focus of this research work is to investigate the effectiveness of Co₃O₄ spinel oxide as the hole transporting interlayer for carbon based perovskite solar cells (PSCs). In these types of PSCs, the power conversion efficiency (PCE) is restricted by the charge carrier transport and recombination processes at the carbon-perovskite interface. The spinel Co₃O₄ nanoparticles are synthesized using the chemical precipitation method, and characterized by X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and UV-Vis spectroscopy. A screen printed thin layer of p-type inorganic spinel Co₃O₄ in carbon PSCs provides a better-energy level matching, superior efficiency, and stability. Compared to standard carbon PSCs (PCE of 11.25%) an improved PCE of 13.27% with long-term stability, up to 2500 hours under ambient conditions, is achieved. Finally, the fabrication of a monolithic perovskite module is demonstrated, having an active area of 70 cm² and showing a power conversion efficiency of >11% with virtually no hysteresis. This indicates that Co₃O₄ is a promising interlayer for efficient and stable large area carbon PSCs.

Improved performance of a CoTe//AC asymmetric supercapacitor using a redox additive aqueous electrolyte

The performance of an ASC with CoTe as the positive electrode can be enhanced by introducing redox additive K₄Fe(CN)₆ into the alkaline electrolyte.

Co3O4 Nanowires on Flexible Carbon Fabric as a Binder-Free Electrode for All Solid-State Symmetric Supercapacitor

Developing portable, lightweight, and flexible energy storage systems has become a necessity with the advent of wearable electronic devices in our modern society. This work focuses on the fabrication of Co₃O₄ nanowires on a flexible carbon fabric (CoNW/CF) substrate by a simple cost-effective hydrothermal route. The merits of the high surface area of the prepared Co₃O₄ nanostructures result in an exceptionally high specific capacitance of 3290 F/g at a scan rate of 5 mV/s, which is close to their theoretical specific capacitance. Furthermore, a solid-state symmetric supercapacitor (SSC) based on CoNW/CF (CoNW/CF//CoNW/CF) was fabricated successfully. The device attains high energy and power densities of 6.7 Wh/kg and 5000 W/kg. It also demonstrates excellent rate capability and retains 95.3% of its initial capacitance after 5000 cycles. Further, the SSC holds its excellent performance at severe bending conditions. When a series assembly of four such devices is charged, it can store sufficient energy to power a series combination of five light-emitting diodes. Thus, this SSC device based on a three-dimensional coaxial architecture opens up new strategies for the design of next-generation flexible supercapacitors.

2-Methylimidazole-Derived Ni-Co Layered Double Hydroxide Nanosheets as High Rate Capability and High Energy Density Storage Material in Hybrid Supercapacitors

A new method based on one-step solvothermal reaction is demonstrated to synthesize ultrathin Ni-Co layered double hydroxide (LDH) nanosheets, which grow directly on a flexible carbon fiber cloth (NiCo-LDH/CFC). Through using 2-methylimidazole as complex and methanol as solvent, the as-prepared NiCo-LDH/CFC shows a (003) facet preferential growth and an expanded interlayer spacing structure, resulting in a unique 3D porous nanostructure with a thickness of nanosheets of around 5-7 nm that shows high energy storage performance. By controlling the ratio of Ni/Co = 4:1 in the precursor solution, the electrode shows a specific capacitance of 2762.7 F g^-1 (1243.2 C g^-1) at a current density of 1 A g^-1. Nevertheless, the optimal composition is obtained with Ni/Co = 1:1, which produces a specific capacitance of 2242.9 F g^-1 (1009.3 C g^-1) at 1 A g^-1 and shows an excellent rate capability with 61% of the original capacitance being retained at a current density of 60 A g^-1. The hybrid supercapacitor (HSC) based on the NiCo-LDH/CFC exhibits a maximum energy density of 59.2 Wh kg^-1 and power densities of 34 kW kg^-1, respectively. Long-term stability test shows that 82% of the original capacitance of the HSC remains after 5000 cycles. Importantly, the electrochemical performance of the solid-state flexible supercapacitors based on the prepared NiCo-LDH/CFC electrode showed a negligible change when the device was bent up to 180°. The performance of synthesized NiCo-LDH/CFC indicates the great potential of the material for delivering both high energy density and high power density in energy storage devices.

Preparation and electrochemical performances of carbon sphere@ZnO core-shell nanocomposites for supercapacitor applications

Carbon sphere (CS)@ZnO core-shell nanocomposites were successfully prepared through facile low-temperature water-bath method without annealing treatment. The morphology and the microstructure of samples were characterized by transition electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), respectively. ZnO nanoparticles with several nanometers in size decorated on the surface of the carbon sphere and formed a core-shell structure. Electrochemical performances of the CS@ZnO core-shell nanocomposites electrodes were investigated by cyclic voltammetry (CV) and galvanostatic charge/discharge (GDC). The CS@ZnO core-shell nanocomposite electrodes exhibit much larger specific capacitance and cycling stability is improved significantly compared with pure ZnO electrode. The CS@ZnO core-shell nanocomposite with mole ratio of 1:1 achieves a specific capacitance of 630 F g⁻¹ at the current density of 2 A g⁻¹. Present work might provide a new route for fabricating carbon sphere and transition metal oxides composite materials as electrodes for the application in supercapacitors.