Mesoporous Ni-P nanocatalysts for alkaline urea electrooxidation

Bifunctional vanadium doped mesoporous Co3O4 on nickel foam towards highly efficient overall urea and water splitting in the alkaline electrolyte

Developing more active and stable electrode materials for oxygen evolution reaction (OER) and urea oxidation reaction (UOR) is necessary for electrocatalytic water and urea oxidation which can be used to generate hydrogen. Here, a low-cost vanadium-doped mesoporous cobalt oxide on Ni foam (V/meso-Co/NF) electrodes are obtained via the grouping of an in-situ citric acid (CA)-assisted evaporation-induced self-assembly (EISA) method and electrophoretic deposition process, and work as highly efficient and long-lasting electrocatalytic materials for OER/UOR. In particular, V/meso-Co/NF electrodes require 329 mV overpotential to maintain a 50 mA/cm2, with exceptional long-term durability of 30 h. Interestingly, V/meso-Co/NF also exhibits excellent electrocatalytic UOR performance, reaching 50 and 100 mA/cm2 versus RHE at low potentials of 1.34 and 1.35 V, respectively. By employing the V/meso-Co/NF materials as both the anode and cathode, this urea electrolysis assembly V/meso-Co/NF-5 (+,-) reaches current densities of 100 mA cm-2 at 1.62 V in KOH/urea, which is nearly 340 mV lesser than classical water electrolysis. The V/meso-Co/NF-5 electrocatalysts also exhibit remarkable durability for electrocatalytic OERs and UORs. The obtained findings revealed that the synthesized V/meso-Co/NF might be a promising electrode materials for overall urea-rich wastewater management and H2 generation from wastewater.

Superwettable and photothermal all-in-one electrocatalyst for boosting water/urea electrolysis

Developing multifunctional all-in-one electrocatalysts for energy-saving hydrogen generation remains a challenge. In this study, a simple and feasible thermal phosphorization strategy is explored to rationally construct P-doped MoO₂-NiMoO₄ heterostructure on nickel foam (NF). The heterointerfaced P-MoO₂-NiMoO₄/NF can simultaneously realize the integrated all-in-one functionalities, innovatively introducing superwettable surfaces, photothermal conversion capabilities and electrocatalytic functions. The superwettability gives P-MoO₂-NiMoO₄/NF sufficient electrolyte permeation and smooth bubble detachment. The plasmonic MoO₂ with photothermal performance greatly elevates the local surface temperature of in P-MoO₂-NiMoO₄/NF, which is conducive to improve the electrocatalytic efficiency. The favorable in-situ surface reconstruction brings abundant active sites for electrocatalytic reactions. As an advanced multifunctional electrocatalyst, the superwettable and photothermal P-MoO₂-NiMoO₄/NF exhibits significantly improved performances in oxygen evolution reaction (OER) and urea oxidation reaction (UOR). More importantly, the highly efficient and stable overall water-urea electrolysis assisted by photothermal fields can be simply achieved by exposing P-MoO₂-NiMoO₄/NF to near-infrared (NIR) light.

Molybdenum carbide/Ni nanoparticles-incorporated carbon nanofibers as effective non-precious catalyst for urea electrooxidation reaction

In this study, molybdenum carbide and carbon were investigated as co-catalysts to enhance the nickel electro-activity toward urea oxidation. The proposed electrocatalyst has been formulated in the form of nanofibrous morphology to exploit the advantage of the large axial ratio. Typically, calcination of electropsun polymeric nanofibers composed of poly(vinyl alcohol), molybdenum chloride and nickel acetate under vacuum resulted in producing good morphology molybdenum carbide/Ni NPs-incorporated carbon nanofibers. Investigation on the composition and morphology of the proposed catalyst was achieved by XRD, SEM, XPS, elemental mapping and TEM analyses which concluded formation of molybdenum carbide and nickel nanoparticles embedded in a carbon nanofiber matrix. As an electrocatalyst for urea oxidation, the electrochemical measurements indicated that the proposed composite has a distinct activity when the molybdenum content is optimized. Typically, the nanofibers prepared from electrospun nanofibers containing 25 wt% molybdenum precursor with respect to nickel acetate revealed the best performance. Numerically, using 0.33 M urea in 1.0 M KOH, the obtained current densities were 15.5, 44.9, 52.6, 30.6, 87.9 and 17.6 mA/cm² for nanofibers prepared at 850 °C from electropsun mats containing 0, 5, 10, 15, 25 and 35 molybdenum chloride, respectively. Study the synthesis temperature of the proposed composite indicated that 1000 °C is the optimum calcination temperature. Kinetic studies indicated that electrooxidation reaction of urea does not follow Arrhenius's law.

Nickel sulfide and phosphide electrocatalysts for hydrogen evolution reaction: challenges and future perspectives

The search for environmentally friendly and sustainable energy sources has become necessary to alleviate the issues associated with the consumption of fossil fuel such as air pollution and global warming. Furthermore, this is significant considering the exhaustible resources and burgeoning energy demand globally. In this regard, hydrogen, a clean fuel with high energy density, is considered a reliable alternative energy source. The hydrogen evolution reaction (HER) is one of the most promising methods to produce green hydrogen from water on a large scale. However, the HER needs effective electrocatalysts to address the concerns of energy consumption; thus, finding active materials has recently been the main focus of researchers. Among the various electrocatalysts, nickel sulfides and phosphides and their derivatives with low cost, high abundance, and relatively straightforward preparation have shown high HER activity. In this review, we compare the diverse methods in the synthesis of nickel sulfides and phosphides together with effective synthesis parameters. Also, the optimum conditions for the preparation of the desired active materials and their properties are provided. Then, the performance of nickel sulfide and phosphide electrocatalysts in the HER is addressed. The HER activity of the various crystalline phases is compared, and their most active crystalline phases are introduced. Finally, the present challenges and perspectives for future HER electrocatalysts are presented.

Hydrothermal Synthesis of MnWO4@GO Composite as Non-Precious Electrocatalyst for Urea Oxidation

In this study, manganese tungstate (MW) and MW/graphene oxide (GO) composites were prepared by a facile hydrothermal synthesis at pH values of 7 and 12. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy were used for the structural, compositional, and morphological characterization of the nanoparticles (NPs). The XRD analysis revealed that the formation of monoclinic MnWO₄ did not have impurities. The SEM and TEM analyses showed that the synthesized NPs were rod-shaped and well-distributed on the GO. The as-synthesized samples can be used as electrocatalysts for the urea oxidation reaction (UOR). The MW@GO-12 electrocatalyst exhibited higher current density values compared to other electrocatalysts. This study provides a new platform for synthesizing inexpensive nanocomposites as promising electrocatalysts for energy storage and conversion applications.

Ni-Fe phosphide deposited carbon felt as free-standing bifunctional catalyst electrode for urea electrolysis

A free-standing catalyst electrode for the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) in a urea electrolysis cell was synthesized by electroplating a Ni-Fe alloy onto carbon felt, followed by phosphidation (P-NiFe@CF). The prepared P-NiFe@CF catalyst consisted of Ni5P4, NiP2, and FeP with 3D flower-like P-NiFe architecture on CF. P-NiFe@CF exhibited excellent electrocatalytic activity for the UOR (demanding only 1.39 V (vs. RHE) to achieve 200 mA cm-2), and for the HER with a low overpotential of 0.023 V (vs. RHE) at 10 mA cm-2, indicating its feasibility as a bifunctional catalyst electrode for urea electrolysis. A urea electrolysis cell with P-NiFe@CF as both the free-standing anode and cathode generated a current density of 10 mA cm-2 at a cell potential of 1.37 V (vs. RHE), which is considerably lower than that of water electrolysis, and also lower than previously reported values. The results indicate that the P-NiFe@CF catalyst electrodes can be used as free-standing bifunctional electrodes for urea electrolyzers.

Ni-Co-B nanoparticle decorated carbon felt by electroless plating as a bi-functional catalyst for urea electrolysis

A free-standing catalyst electrode for urea electrolysis was synthesized by electroless plating of NiCoB alloy onto a flexible carbon felt. The synthesized NiCoB@C catalyst exhibited porous and partially amorphous metallic structure depending on its composition, as analysed by XRD, XPS, and TEM; thus, NiCoB@C catalyst showed a high catalytic activity for urea oxidation reaction as well as hydrogen evolution reaction. The required cell voltage in the electrolysis cell with NiCoB@C as anode and cathode was as low as 1.34 V for the current densities 10 mA cm^-2. Similar performance of the urea electrolysis for H₂ production using 0.33 M urea and a fresh urine in 1 M KOH was observed. The result indicated that NiCoB could be incorporated on to carbon felt by electroless plating, and it could be used as free-standing bifunctional electrodes for urea electrolysis using urea as well as urine.

Structure and electrochemical activity of nickel aluminium fluoride nanosheets during urea electro-oxidation in an alkaline solution

An electrocatalyst of potassium nickel aluminium hexafluoride (KNiAlF₆) nanosheets has been prepared using solid-phase synthesis at 900 °C. X-ray diffraction, scanning electron microscopy, and conductivity studies confirmed the formation of KNiAlF₆ nanosheets having a cubic defect pyrochlore structure with an average thickness of 60–70 nm and conductivity of 1.297 × 10³ S m⁻¹. The electrochemical catalytic activity of the KNiAlF₆ nanosheets was investigated for urea oxidation in alkaline solution. The results show that the KNiAlF₆ nanosheets exhibit a mass activity of ∼395 mA cm⁻² mg⁻¹ at 1.65 V vs. HRE, a reaction activation energy of 4.02 kJ mol⁻¹, Tafel slope of 22 mV dec⁻¹ and an oxidation onset potential of ∼1.35 V vs. HRE which is a significant enhancement for urea oxidation when compared with both bulk Ni(OH)₂ and nickel hydroxide-based catalysts published in the literature. Chronoamperometry and impedance analysis of the KNiAlF₆ nanosheets reveal lower charge transfer resistance and long-term stability during the prolonged urea electro-oxidation process, particularly at 60 °C. After an extended urea electrolysis process, the structure and morphology of the KNiAlF₆ nanosheets were significantly changed due to partial transformation to Ni(OH)₂ but the electrochemical activity was sustained. The enhanced electrochemical surface area and the replacement of nickel in the lattice by aluminium make KNiAlF₆ nanosheets highly active electrocatalysts for urea oxidation in alkaline solution.

An electrocatalyst of potassium nickel aluminium hexafluoride (KNiAlF₆) nanosheets for enhanced urea oxidation reaction.

Trimetallic NiCoMo/graphene multifunctional electrocatalysts with moderate structural/electronic effects for highly efficient alkaline urea oxidation reaction

Trimetallic NiCoMo/graphene (NCM/G 811) multifunctional electrocatalysts demonstrate remarkable catalytic activity, fast kinetics, a low onset potential and high stability towards alkaline urea oxidation reaction (UOR). Moderate structural/electronic effects among Ni, Co and Mo species are responsible for the outstanding catalytic behavior.

NiF2 Nanorod Arrays for Supercapattery Applications

A electrode for energy storage cells is possible directly on Ni foam, using a simple reduction process to form NiF2 nanorod arrays (NA). We demonstrate NiF2@Ni NA for a symmetric electrochemical supercapattery electrode. With an areal specific capacitance of 51 F cm-2 at 0.25 mA cm-2 current density and 94% cycling stability, a NiF2@Ni electrode can exhibit supercapattery behavior, a combination of supercapacitor and battery-like redox. The symmetric electrochemical supercapattery delivers 31 W h m-2 energy density and 797 W m-2 power density with 83% retention in a 1 M KOH electrolyte, constituting a step toward manufacturing a laboratory-scale energy storage device based on metal halides. Producing self-grown hierarchically porous nanostructured electrodes on three-dimensional metal foams by displacement reactions may be useful for other metal halides as electrodes for supercapacitors, supercapatteries, and lithium-ion batteries.

Designing Advanced Catalysts for Energy Conversion Based on Urea Oxidation Reaction

Urea oxidation reaction (UOR) is the underlying reaction that determines the performance of modern urea-based energy conversion technologies. These technologies include electrocatalytic and photoelectrochemical urea splitting for hydrogen production and direct urea fuel cells as power engines. They have demonstrated great potentials as alternatives to current water splitting and hydrogen fuel cell systems with more favorable operating conditions and cost effectiveness. At the moment, UOR performance is mainly limited by the 6-electron transfer process. In this case, various material design and synthesis strategies have recently been reported to produce highly efficient UOR catalysts. The performance of these advanced catalysts is optimized by the modification of their structural and chemical properties, including porosity development, heterostructure construction, defect engineering, surface functionalization, and electronic structure modulation. Considering the rich progress in this field, the recent advances in the design and synthesis of UOR catalysts for urea electrolysis, photoelectrochemical urea splitting, and direct urea fuel cells are reviewed here. Particular attention is paid to those design concepts, which specifically target the characteristics of urea molecules. Moreover, challenges and prospects for the future development of urea-based energy conversion technologies and corresponding catalysts are also discussed.

Recent progress with electrocatalysts for urea electrolysis in alkaline media for energy-saving hydrogen production

Urea electrolysis is a promising energy-saving avenue for hydrogen production owing to the low cell voltage, wastewater remediation and abundant electrocatalysts.

Effect of reactor configuration on the kinetics and nitrogen byproduct selectivity of urea electrolysis using a boron doped diamond electrode

Electrochemical systems have emerged as an advantageous approach for decentralized management of source-separated urine with the possibility of recovering or removing nutrients and generating energy. In this study, the kinetics and byproduct selectivity of the electrolytic removal of urea were investigated using a boron doped diamond working electrode under varied operational conditions with a primary focus on comparing undivided and divided reactors. The urea removal rate in the undivided and divided reactors was similar, but the divided reactor had an increased required cell voltage needed to maintain the equivalent current density. The current efficiency was similar for 0.1, 0.25, and 0.5 A (33.3, 83.3, 167 mA/cm²), suggesting no interference from competing reactions at higher potentials. In a divided reactor, increasing the anolyte pH reduced the urea removal rate presumably from hydroxyl radical scavenging by hydroxide. Further, for all divided reactor experiments, the final pH was less than 1, suggesting that the transport of protons across the ion exchange membrane to the cathode was slower than the oxidation reactions producing protons. The nitrogen byproduct selectivity was markedly different in the undivided and divided reactors. In both reactors, nitrate (NO₃^-) formed as the main byproduct at the anode, but in the undivided reactor it was reduced at the stainless steel cathode to ammonia. In the presence of 1 M chloride, the urea removal kinetics improved from the generation of reactive chlorine species, and the byproduct selectivity was shifted away from NO₃^- to presumably chloramines and N₂. Overall, these results indicate that the electrochemical reactor configuration should be carefully considered depending on the desired outcome of treating source-separated urine (e.g., nitrogen recovery, H₂ generation).

Electrochemical Oxidation of Urea on NiCu Alloy Nanoparticles Decorated Carbon Nanofibers

Bimetallic Cu3.8Ni alloy nanoparticles (NPs)-anchored carbon nanofibers (composite NFs) were synthesized using a simple electrospinning machine. XRD, SEM, TEM, and TGA were employed to examine the physiochemical characteristics of these composite NFs. The characterization techniques proved that Cu3.8Ni alloy NPs-anchored carbon NFs were successfully fabricated. Urea oxidation (UO) processes as a source of hydrogen and electrical energy were investigated using the fabricated composite NFs. The corresponding onset potential of UO and the oxidation current density (OCD) were measured via cyclic voltammetry as 380 mV versus Ag/AgCl electrode and 98 mA/cm2, respectively. Kinetic study indicated that the electrochemical oxidation of urea followed the diffusion controlled process and the reaction order is 0.5 with respect to urea concentration. The diffusion coefficient of urea using the introduced electrocatalyst was found to be 6.04 × 10−3 cm2/s. Additionally, the composite NFs showed steady state stability for 900 s using chronoamperometry test.

Morphology and electronic structure modulation induced by fluorine doping in nickel-based heterostructures for robust bifunctional electrocatalysis

Fabrication of advanced electrocatalysts with high activity and durability is urgently needed to achieve energy conversion and pollution treatment at the same time. Herein, we highlight a fluorine-doped nickel-based heterostructure, in which fluorine doping displays a dual effect in Ni(OH)2 nanosheets/Ni3S2 heteronanorods. On the one hand, fluorine doping can facilitate the formation of Ni(OH)2 nanosheets/Ni3S2 heteronanorods through one-step in situ growth on nickel foams. The unique heterostructure enables good exposure of abundant active sites and highly active heterointerfaces. On the other hand, the uniform incorporation of fluorine can effectively modulate the electron density at the Fermi level of Ni3S2, contributing to the improved electrical conductivity and charge transfer efficiency, further improving the electrocatalytic activity in the oxygen evolution reaction (OER) and urea oxidation reaction (UOR). The optimal heterostructure presents a low overpotential of 360 mV to reach the OER current density of 100 mA cm-2. Finally, this heterostructure also displays a superior UOR anodic peak current of about 322.9 mA cm-2, almost the highest value at the anodic peak compared to the literature.

Recent Advances in the Electro-Oxidation of Urea for Direct Urea Fuel Cell and Urea Electrolysis

This paper provides an overview of recent advances in urea electro-oxidation. Urea sources are abundant from human urine, urea-containing wastewater, and industrial urea, thus becoming an attractive option as anodic fuel for the application in direct urea fuel cells (DUFCs). Besides, as a hydrogen-rich chemical fuel, urea can also be electrolyzed to produce hydrogen for energy storage in the near future. The exact mechanisms of urea decomposition are pretty different in alkaline or neutral mediums and are separately discussed in detail. More importantly, the development of anodic electro-catalysts is of great significance for improving the electrochemical performance of both DUFCs and urea electrolysis cells, which is systematically summarized in our review. Challenges and prospects on the future development of urea electro-oxidation are particularly proposed.

Effect of Urine Compounds on the Electrochemical Oxidation of Urea Using a Nickel Cobaltite Catalyst: An Electroanalytical and Spectroscopic Investigation

Cyclic voltammetry (CV) and in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy were used to investigate the effect of major urine compounds on the electro-oxidation activity of urea using a nickel cobaltite (NiCo₂O₄ ) catalyst. As a substrate, carbon paper exhibited better benchmark potential and current values compared with stainless steel and fluorine-doped tin oxide glass, which was attributed to its greater active surface area per electrode geometric area. CV analysis of synthetic urine showed that phosphate, creatinine, and gelatin (i.e., proteins) had the greatest negative effect on the electro-oxidation activity of urea, with decreases in peak current up to 80% compared to that of a urea-only solution. Further investigation of the binding mechanisms of the deleterious compounds using in situ ATR-FTIR spectroscopy revealed that urea and phosphate weakly bind to NiCo₂O₄ through hydrogen bonding or long-range forces, whereas creatinine interacts strongly, forming deactivating inner-sphere complexes. Phosphate is presumed to disrupt the interaction between urea and NiCo₂O₄ by serving as a hydrogen-bond acceptor in place of catalyst sites. The weak binding of urea supports the hypothesis that it is oxidized through an indirect electron transfer. Outcomes of this study contribute to the development of electrolytic systems for treating source-separated urine.