1
|
Namvari M, Chakrabarti BK. Electrophoretic deposition of MXenes and their composites: Toward a scalable approach. Adv Colloid Interface Sci 2024; 331:103208. [PMID: 38852471 DOI: 10.1016/j.cis.2024.103208] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/05/2024] [Revised: 06/01/2024] [Accepted: 06/02/2024] [Indexed: 06/11/2024]
Abstract
Over the past decade, MXenes, a novel class of advanced 2D nanomaterials, have manifested as a prominent electrode material with diverse applications. Their unique layered structures, negative zeta potential, charge carrier mobility, mechanical properties, adjustable bandgap, hydrophilicity, metallic nature, and surface chemistry collectively contribute to the abundance of active redox sites on the surface and a reduction in the ion diffusion pathway. Despite such promising attributes of MXene, challenges like aggregation and restacking reduce the accessibility of active surface sites for electrolyte ions. Amongst approaches such as surface functionalization, addition of spacers, or facilitating pore formation, the electrophoretic deposition (EPD) of MXene on substrates has commenced to gain attention aiming to mitigate these issues. More importantly, it offers large-scale film fabrication in a short time without the necessity of using a charge-inducing agent. This review compiles recent advances in the use of EPD for preparing MXene-based electrodes and discusses the effect of EPD parameters on the relevant device performance. Recognition is given to understanding the relation of MXene colloidal composition in aqueous (and in some cases, non-aqueous) dispersions, deposition times, and other relevant parameters on respective device performances. In conclusion, the potential avenues offered by MXenes for future research on electrode materials are emphasized.
Collapse
Affiliation(s)
- Mina Namvari
- Sabanci University Nanotechnology Research and Application Center (SUNUM), Sabanci University, Istanbul 34956, Turkey.
| | - Barun Kumar Chakrabarti
- Sabanci University Nanotechnology Research and Application Center (SUNUM), Sabanci University, Istanbul 34956, Turkey
| |
Collapse
|
2
|
Dutta P, Deb SK, Patra A, Karim GM, Majumder A, Kumar P, Iyer PK, Padma N, Maiti UN. Activating Ion Channels in Collapsed Hydrogel Derived Densified MXene Films with Cellulose Nanofibers to Overcome the Areal Versus Volumetric Capacitance Trade-Off. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2024; 20:e2400119. [PMID: 38676344 DOI: 10.1002/smll.202400119] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/05/2024] [Revised: 04/16/2024] [Indexed: 04/28/2024]
Abstract
Concomitant achievement of all three performance pillars of a supercapacitor device, namely gravimetric, areal, and volumetric capacitance is a grand challenge. Nevertheless, its fulfilment is indispensable for commercial usage. Although, high compactness is the fundamental requirement to achieve high volumetric performance, it severely affects ion transportation in thick electrodes. Such trade-off makes it extremely challenging to realize very high areal and volumetric performance simultaneously. Here, a collapsed hydrogel strategy is introduced to develop MXene/cellulose nanofiber (CNF) based densified electrodes that offer excellent ion transportation despite a massive increase in areal mass loading (>70 mg cm-2). Quasi-oriented MXene/CNF (MXCF) hydrogels are produced through an electric field-guided co-assembly technique. Ambient dehydration of these hydrogels incorporates numerous pores in the resultant compact electrodes due to crumpling of the MXene sheets, while CNF ensures connectivity among the locally blocked pores in different length scales. The resultant collapsed MXCF densified electrode shows a remarkably high areal capacitance of 16 F cm-2 while simultaneously displaying a high volumetric capacitance of 849.8 F cm-3 at an ultrahigh mass loading of up to 73.4 mg cm-2. The universality of strategy, including the co-assembly of hydrogel and its collapse, is further demonstrated to develop high-performance asymmetric and wearable devices.
Collapse
Affiliation(s)
- Pronoy Dutta
- Department of Physics, Indian Institute of Technology Guwahati, Guwahati, Assam, 781039, India
| | - Sujit Kumar Deb
- Department of Physics, Indian Institute of Technology Guwahati, Guwahati, Assam, 781039, India
| | - Amalika Patra
- Department of Physics, Indian Institute of Technology Guwahati, Guwahati, Assam, 781039, India
| | - Golam Masud Karim
- Department of Physics, Indian Institute of Technology Guwahati, Guwahati, Assam, 781039, India
| | - Abhisek Majumder
- Department of Physics, Indian Institute of Technology Guwahati, Guwahati, Assam, 781039, India
| | - Pradip Kumar
- CSIR-Advanced Materials and Processes Research Institute (AMPRI), Bhopal, 462026, India
| | - Parameswar Krishnan Iyer
- Department of Chemistry, Indian Institute of Technology Guwahati, Guwahati, 781039, India
- Centre of Nanotechnology, Indian Institute of Technology Guwahati, Guwahati, 781039, India
| | - Narayanan Padma
- Technical Physics Division, Bhabha Atomic Research Centre, Mumbai, 400085, India
- Homi Bhabha National Institute, Anushaktinagar, Mumbai, 400094, India
| | - Uday Narayan Maiti
- Department of Physics, Indian Institute of Technology Guwahati, Guwahati, Assam, 781039, India
- Centre of Nanotechnology, Indian Institute of Technology Guwahati, Guwahati, 781039, India
| |
Collapse
|
3
|
Yang R, Hu Q, Yang S, Zeng Z, Zhang H, Cao A, Gui X. Anchoring Oxidized MXene Nanosheets on Porous Carbon Nanotube Sponge for Enhancing Ion Transport and Pseudocapacitive Performance. ACS APPLIED MATERIALS & INTERFACES 2022; 14:41997-42006. [PMID: 36070442 DOI: 10.1021/acsami.2c10659] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Two-dimensional (2D) MXene nanosheets are attractive for electrochemical energy storage applications due to their superior surface-controlled charge storage capacity. However, the slow ion transport in the closely packed electrode limits their electrochemical performances. Meanwhile, the restricted surface-controlled pseudocapacitance of MXene nanosheets requires to be enhanced. Herein, a well-controlled electrophoretic deposition strategy is developed to disperse Ti3C2Tx nanosheets into a freestanding, porous carbon nanotube (CNT) sponge. The constructed Ti3C2Tx@CNT hybrid sponge can provide high-speed ion-transport pathways for the charge-discharge process. Furthermore, by tuning the deposition potential, the inserted MXene nanosheets can be partially oxidized, boosting the pseudocapacitance performance. A large gravimetric capacitance of 468 F g-1 at 10 mV s-1 and a retention of 79.8% at 100 mV s-1 can be achieved in the Ti3C2Tx@CNT electrode. Meanwhile, the highest areal capacitance of 661 mF cm-2 at 1 mA cm-2 was obtained in the sample with high-loading Ti3C2Tx. For the assembled symmetric supercapacitor, 92.8% of the capacitance is retained after 10 000 cycles of the charge-discharge process at 10 mA cm-2. Thus, this study develops a promising electrophoretic deposition strategy for dispersing 2D MXene nanosheets and boosting their pseudocapacitive performance, resulting in a high-capacitive electrochemical energy storage electrode.
Collapse
Affiliation(s)
- Rongliang Yang
- State Key Laboratory of Optoelectronic Materials and Technologies, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou 510275, China
| | - Qingmei Hu
- State Key Laboratory of Optoelectronic Materials and Technologies, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou 510275, China
| | - Shaodian Yang
- State Key Laboratory of Optoelectronic Materials and Technologies, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou 510275, China
| | - Zhiping Zeng
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, China
| | - Hao Zhang
- Instrumental Analysis and Research Center (IARC), Sun Yat-sen University, Guangzhou 510275, China
| | - Anyuan Cao
- Department of Materials Science and Engineering, College of Engineering, Peking University, Beijing 100871, China
| | - Xuchun Gui
- State Key Laboratory of Optoelectronic Materials and Technologies, School of Electronics and Information Technology, Sun Yat-sen University, Guangzhou 510275, China
| |
Collapse
|
4
|
Ma R, Zhang X, Zhuo J, Cao L, Song Y, Yin Y, Wang X, Yang G, Yi F. Self-Supporting, Binder-Free, and Flexible Ti 3C 2T x MXene-Based Supercapacitor Electrode with Improved Electrochemical Performance. ACS NANO 2022; 16:9713-9727. [PMID: 35584058 DOI: 10.1021/acsnano.2c03351] [Citation(s) in RCA: 22] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
MXenes have shown great potential for supercapacitor electrodes due to their unique characteristics, but simultaneously achieving high capacitance, rate capability, and cyclic stability along with good mechanical flexibility is exceptionally challenging. Here, highly enhanced capacitance, rate capability, and cyclic stability, as well as good mechanical flexibility for T3C2Tx MXene-based supercapacitor electrodes are simultaneously obtained by engineering the electrode structure, modifying the surface chemistry, and optimizing the fabrication process via an optimized integration approach. This approach combines and more importantly optimizes three methods that all require a calcination process: carbonizing in situ grown polymer ("Cpolymer") on the MXene, alkali treatment ("A"), and template sacrificing ("P"); and the optimized processes lead to more abundant active sites, faster ion accessibility, better chemical stability, and good mechanical flexibility. The obtained P-MXene/Cpolymer-A electrodes are binder-free and self-supporting and not only have good mechanical flexibility but also demonstrate much larger capacitances and better rate performance than the pristine MXene electrode. Specifically, the P-MXene/CPAQ-A electrode (PAQ: quinone-amine polymer) achieves a high capacitance of 532.9 F g-1 at 5 mV s-1, together with superior rate performance and improved cyclic stability (97.1% capacitance retention after 40 000 cycles at 20 A g-1) compared with the pristine MXene (79.6% retention) and P-MXene-A (77.3% retention) electrodes. In addition, it is discovered that carbonizing in situ grown polymers can variously remove the -F group and the removal effect can be accumulated with that by the alkali treatment.
Collapse
Affiliation(s)
- Rui Ma
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, P. R. China
| | - Xujing Zhang
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, P. R. China
| | - Jingting Zhuo
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, P. R. China
| | - Lingyun Cao
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, P. R. China
| | - Yutong Song
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, P. R. China
| | - Yajiang Yin
- Department of Precision Instrument, Tsinghua University, Beijing 100084, P. R. China
| | - Xiaofeng Wang
- Department of Precision Instrument, Tsinghua University, Beijing 100084, P. R. China
| | - Guowei Yang
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, P. R. China
- State Key Laboratory of Optoelectronic Materials and Technologies, Sun Yat-sen University, Guangzhou 510275, P. R. China
| | - Fang Yi
- School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou 510275, P. R. China
- Nanotechnology Research Center, Sun Yat-sen University, Guangzhou 510275, P. R. China
- Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sun Yat-sen University, Guangzhou 510275, P. R. China
| |
Collapse
|
5
|
Chen W, Hao C, Qiu Z, Zhang X, Xu H, Yu B, Chen S. High-Energy-Density Asymmetric Supercapacitor Based on Free-Standing Ti 3C 2T X@NiO-Reduced Graphene Oxide Heterostructured Anode and Defective Reduced Graphene Oxide Hydrogel Cathode. ACS APPLIED MATERIALS & INTERFACES 2022; 14:19534-19546. [PMID: 35446552 DOI: 10.1021/acsami.2c02507] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
The rational design of an asymmetric supercapacitor (ASC) with an expanded operating voltage window has been recognized as a promising strategy to maximize the energy density of the device. Nevertheless, it remains challenging to have electrode materials that feature good electrical conductivity and high specific capacitance. Herein, a 3D layered Ti3C2TX@NiO-reduced graphene oxide (RGO) heterostructured hydrogel was successfully synthesized by uniform deposition of NiO nanoflowers onto Ti3C2TX nanosheets, and the heterostructure was assembled into a 3D porous hydrogel through a hydrothermal GO-gelation process at low temperatures. The resultant Ti3C2TX@NiO-RGO heterostructured hydrogel exhibited an ultrahigh specific capacitance of 979 F g-1 at 0.5 A g-1, in comparison to that of Ti3C2TX@NiO (623 F g-1) and Ti3C2TX (112 F g-1). Separately, a defective RGO (DRGO) hydrogel was found to exhibit a drastic increase in specific capacitance, compared to untreated RGO (261 vs 178 F g-1 at 0.5 A g-1), owing to abundant mesopores. These two materials were then used as free-standing anode and cathode to construct an ASC, which displayed a large operating voltage (1.8 V), a high energy density (79.02 Wh kg-1 at 450 W kg-1 and 45.68 Wh kg-1 at 9000 W kg-1), and remarkable cycling stability (retention of 95.6% of the capacitance after 10,000 cycles at 10 A g-1). This work highlights the unique potential of Ti3C2TX-based heterostructured hydrogels as viable electrode materials for ASCs.
Collapse
Affiliation(s)
- Weiwen Chen
- College of Mathematics & Physics, Beijing University of Chemical Technology, Beijing 100029, China
- Beijing Bioprocess Key Laboratory, Beijing University of Chemical Technology, Beijing 100029, China
| | - Chunfeng Hao
- College of Mathematics & Physics, Beijing University of Chemical Technology, Beijing 100029, China
- Beijing Bioprocess Key Laboratory, Beijing University of Chemical Technology, Beijing 100029, China
| | - Zenghui Qiu
- College of Mathematics & Physics, Beijing University of Chemical Technology, Beijing 100029, China
- Beijing Bioprocess Key Laboratory, Beijing University of Chemical Technology, Beijing 100029, China
| | - Xin Zhang
- College of Mathematics & Physics, Beijing University of Chemical Technology, Beijing 100029, China
- Beijing Bioprocess Key Laboratory, Beijing University of Chemical Technology, Beijing 100029, China
| | - Haijun Xu
- College of Mathematics & Physics, Beijing University of Chemical Technology, Beijing 100029, China
- Beijing Bioprocess Key Laboratory, Beijing University of Chemical Technology, Beijing 100029, China
| | - Bingzhe Yu
- Department of Chemistry and Biochemistry, University of California, 1156 High Street, Santa Cruz, California 95064, United States
| | - Shaowei Chen
- Department of Chemistry and Biochemistry, University of California, 1156 High Street, Santa Cruz, California 95064, United States
| |
Collapse
|
6
|
Pallavolu MR, Gaddam N, Banerjee AN, Nallapureddy RR, Kumar YA, Joo SW. Facile construction and controllable design of CoTiO3@Co3O4/N CNO hybrid heterojunction nanocomposite electrode for high-performance supercapacitors. Electrochim Acta 2022. [DOI: 10.1016/j.electacta.2022.139868] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
7
|
Baig MM, Gul IH, Baig SM, Shahzad F. 2D MXenes: Synthesis, properties, and electrochemical energy storage for supercapacitors – A review. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2021.115920] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
|
8
|
Wu Y, Zhao D, Zhang J, Lin A, Wang Y, Cao L, Wang S, Xiong S, Gu F. Microscale Curling and Alignment of Ti 3C 2T x MXene by Confining Aerosol Droplets for Planar Micro-Supercapacitors. ACS OMEGA 2021; 6:33067-33074. [PMID: 34901658 PMCID: PMC8655942 DOI: 10.1021/acsomega.1c05373] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/28/2021] [Accepted: 11/10/2021] [Indexed: 06/14/2023]
Abstract
Additive manufacturing techniques have revolutionized the field of fabricating micro-supercapacitors (MSCs) with a high degree of pattern and geometry flexibility. However, traditional additive manufacturing processes are based on the functionality of microstructural modulation, which is essential for device performance. Herein, Ti3C2T x MXene was chosen to report a convenient aerosol jet printing (AJP) process for the in situ curling and alignment of MXene nanosheets. The aerosol droplet provides a microscale regime for curling MXene monolayers while their alignment is performed by the as-generated directional stress derived from the quasi-conical fiber array (CFA)-guided parallel droplet flow. Interdigital microelectrodes were further developed with the curled MXene and a satisfying areal capacitance performance has been demonstrated. Importantly, the AJP technique holds promise for revolutionizing additive manufacturing techniques for fabricating future smart microelectronics and devices not only in the microscale but also in the nanoscale.
Collapse
Affiliation(s)
- Yu Wu
- Jiangxi
University of Science and Technology, Ganzhou 341000, China
- Laboratory
of Advanced Materials & Manufacturing (LAMM), Jiangxi Provincial
Key Laboratory for Simulation and Modelling of Particulate Systems, Jiangxi University of Science and Technology, Nanchang 330013, China
| | - Danjiao Zhao
- Jiangxi
University of Science and Technology, Ganzhou 341000, China
- Laboratory
of Advanced Materials & Manufacturing (LAMM), Jiangxi Provincial
Key Laboratory for Simulation and Modelling of Particulate Systems, Jiangxi University of Science and Technology, Nanchang 330013, China
| | - Jidi Zhang
- Institute
for Process Modelling and Optimization, Jiangsu Industrial Technology Research Institute, Suzhou 215123, China
| | - Aiping Lin
- Jiangxi
University of Science and Technology, Ganzhou 341000, China
- Laboratory
of Advanced Materials & Manufacturing (LAMM), Jiangxi Provincial
Key Laboratory for Simulation and Modelling of Particulate Systems, Jiangxi University of Science and Technology, Nanchang 330013, China
| | - Yu Wang
- Jiangxi
University of Science and Technology, Ganzhou 341000, China
- Laboratory
of Advanced Materials & Manufacturing (LAMM), Jiangxi Provincial
Key Laboratory for Simulation and Modelling of Particulate Systems, Jiangxi University of Science and Technology, Nanchang 330013, China
| | - Lei Cao
- Jiangxi
University of Science and Technology, Ganzhou 341000, China
- Laboratory
of Advanced Materials & Manufacturing (LAMM), Jiangxi Provincial
Key Laboratory for Simulation and Modelling of Particulate Systems, Jiangxi University of Science and Technology, Nanchang 330013, China
| | - Shufen Wang
- Jiangxi
University of Science and Technology, Ganzhou 341000, China
- Laboratory
of Advanced Materials & Manufacturing (LAMM), Jiangxi Provincial
Key Laboratory for Simulation and Modelling of Particulate Systems, Jiangxi University of Science and Technology, Nanchang 330013, China
| | - Shixian Xiong
- Jiangxi
University of Science and Technology, Ganzhou 341000, China
- Laboratory
of Advanced Materials & Manufacturing (LAMM), Jiangxi Provincial
Key Laboratory for Simulation and Modelling of Particulate Systems, Jiangxi University of Science and Technology, Nanchang 330013, China
| | - Feng Gu
- Jiangxi
University of Science and Technology, Ganzhou 341000, China
- Laboratory
of Advanced Materials & Manufacturing (LAMM), Jiangxi Provincial
Key Laboratory for Simulation and Modelling of Particulate Systems, Jiangxi University of Science and Technology, Nanchang 330013, China
- Institute
for Process Modelling and Optimization, Jiangsu Industrial Technology Research Institute, Suzhou 215123, China
| |
Collapse
|
9
|
Li T, Chang X, Mei L, Shu X, Ma J, Ouyang L, Gu S. Solvothermal preparation of spherical Bi 2O 3 nanoparticles uniformly distributed on Ti 3C 2T x for enhanced capacitive performance. NANOSCALE ADVANCES 2021; 3:5312-5321. [PMID: 36132625 PMCID: PMC9417557 DOI: 10.1039/d1na00443c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/15/2021] [Accepted: 08/03/2021] [Indexed: 06/15/2023]
Abstract
Ti3C2T x is a promising new two-dimensional layered material for supercapacitors with good electrical conductivity and chemical stability. However, Ti3C2T x has problems such as collapse of the layered structure and low pseudocapacitance. In this paper, we propose Bi2O3-Ti3C2T x nanocomposites prepared by a solvothermal method, study the impact of Bi2O3 loading on the phase state and microstructure, and evaluate the electrochemical performance of Bi2O3-Ti3C2T x . Studies have shown that spherical Bi2O3 particles were uniformly dispersed in the interlayer and surface of Ti3C2T x , which enlarged the interlayer spacing of the Ti3C2T x and increased the pseudocapacitance. When the mass percentage of Bi2O3 and Ti3C2T x was 30% (TB30), the specific capacity of TB30 was as high as 183 F g-1 at a current density of 0.2 A g-1, which was about 2.8 times that of Ti3C2T x (TB0). Moreover, a typical asymmetric supercapacitor device assembled with TB0 as the positive electrode and TB30 as the negative electrode exhibited a high energy density of 3.92 W h kg-1 and a maximum power density of 36 000 W kg-1 and maintained 77.4% of the initial capacitance after 5000 cycles at a current density of 2 A g-1. Therefore, the Bi2O3-Ti3C2T x as the negative electrode of supercapacitor has broad application prospects in the field of energy storage.
Collapse
Affiliation(s)
- Tao Li
- Mechanical and Automotive Engineering, Xiamen University of Technology Xiamen Fujian 361024 P. R. China
- Institute of Precision Actuation and Transmission Xiamen Fujian 361024 P. R. China
| | - Xuefeng Chang
- Mechanical and Automotive Engineering, Xiamen University of Technology Xiamen Fujian 361024 P. R. China
- Institute of Precision Actuation and Transmission Xiamen Fujian 361024 P. R. China
| | - Lifang Mei
- Mechanical and Automotive Engineering, Xiamen University of Technology Xiamen Fujian 361024 P. R. China
- Institute of Precision Actuation and Transmission Xiamen Fujian 361024 P. R. China
| | - Xiayun Shu
- Mechanical and Automotive Engineering, Xiamen University of Technology Xiamen Fujian 361024 P. R. China
- Institute of Precision Actuation and Transmission Xiamen Fujian 361024 P. R. China
| | - Jidong Ma
- The Key Laboratory for Power Metallurgy Technology and Advanced Materials of Xiamen Xiamen Fujian 361024 P. R. China
| | - Li Ouyang
- Mechanical and Automotive Engineering, Xiamen University of Technology Xiamen Fujian 361024 P. R. China
- Institute of Precision Actuation and Transmission Xiamen Fujian 361024 P. R. China
| | - Siyong Gu
- The Key Laboratory for Power Metallurgy Technology and Advanced Materials of Xiamen Xiamen Fujian 361024 P. R. China
| |
Collapse
|
10
|
Spontaneous three-dimensional self-assembly of MXene and graphene for impressive energy and rate performance pseudocapacitors. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2021.138959] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
11
|
Momodu D, Zeraati AS, Pablos FL, Sundararaj U, Roberts EPL. Hybrid energy storage using nitrogen-doped graphene and layered-MXene (Ti3C2) for stable high-rate supercapacitors. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2021.138664] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
12
|
Liao L, Zhang A, Zheng K, Liu R, Cheng Y, Wang L, Li A, Liu J. Fabrication of Cobaltous Sulfide Nanoparticle-Modified 3D MXene/Carbon Foam Hybrid Aerogels for All-Solid-State Supercapacitors. ACS APPLIED MATERIALS & INTERFACES 2021; 13:28222-28230. [PMID: 34105949 DOI: 10.1021/acsami.1c05904] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
MXene is a neoteric type of bidimensional (2D) transition metal carbide/nitride with broad application prospects, in particular with electrochemical energy storage. The electrochemical performance of MXene is unsatisfactory because it is easy to stack resulting in the difficulty of electrolyte penetration and ion transport. In this study, the cobaltous sulfide-modified 3D MXene/N-doped carbon foam (CoS@MXene/CF) hybrid aerogel is projected and manufactured via simple in situ growth and thermal annealing strategies. The capacitance of the as-fabricated 300-CMC-31:1 electrode material reaches 250 F g-1 (1 A g-1), which is obviously higher than those of MXene, CoS@CF, 400-CMC-31:1, 300-CMC-10:1, 300-CMC-50:1, CF, and MXene/CF electrode materials. Moreover, it can hold 97.5% of the original capacitance after 10,000 cycles and the internal resistance (Rs) is only 0.50 Ω. A green bulb can be lit by two all-solid asymmetric supercapacitors installed in series. The prepared CoS@MXene/CF hybrid aerogel exhibits promising potential for practical application in energy storage areas.
Collapse
Affiliation(s)
- Leiping Liao
- College of Material Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, Shandong, China
| | - Aitang Zhang
- College of Material Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, Shandong, China
| | - Kun Zheng
- College of Material Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, Shandong, China
| | - Rui Liu
- College of Material Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, Shandong, China
| | - Yujun Cheng
- College of Material Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, Shandong, China
| | - Lihua Wang
- College of Material Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, Shandong, China
| | - Aihua Li
- College of Material Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, Shandong, China
| | - Jingquan Liu
- College of Material Science and Engineering, Institute for Graphene Applied Technology Innovation, Collaborative Innovation Centre for Marine Biomass Fibers, Materials and Textiles of Shandong Province, Qingdao University, Qingdao 266071, Shandong, China
| |
Collapse
|
13
|
Sun L, Fu Q, Pan C. Hierarchical porous "skin/skeleton"-like MXene/biomass derived carbon fibers heterostructure for self-supporting, flexible all solid-state supercapacitors. JOURNAL OF HAZARDOUS MATERIALS 2021; 410:124565. [PMID: 33229257 DOI: 10.1016/j.jhazmat.2020.124565] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/06/2020] [Revised: 10/26/2020] [Accepted: 11/10/2020] [Indexed: 06/11/2023]
Abstract
Two-dimensional transition metal carbide and nitride are promising energy storage materials. However, the aggregation and rearrangement of two-dimensional nanosheets limit their electrochemical performance. In this paper, a novel hierarchical porous "skin/skeleton"-like MXene/biomass derived carbon fibers (MXene/CF) heterostructure is prepared by one-step pyrolysis, which efficiently weakens the stacking of MXene nanosheets. Moreover, MXene/CF has a well-defined hierarchical porous structure, thereby facilitating electrolyte penetration and providing efficient and stable channels for rapid diffusion/transfer of ions to the electrode and producing functional MXene-based electrodes. When MXene/CF heterostructure is applied as a self-supporting electrode for supercapacitors, the electrode has high volumetric capacitance of 7.14 F cm-3, good rate characteristics (63.9% from 0.5 to 100 A g-1), and excellent cyclic stability (99.8% after 5000 cycles). In addition, all solid-state symmetric supercapacitors based on MXene/CF electrodes are also assembled, which not only exhibits high capacitance and rate performance, but also has good flexibility and long durability. The device still maintains structural integrity and steady capacitance even after 2500 cycles at different bending angles. This work is expecting to guide the design of the next generation of flexible, portable and highly integrated supercapacitors with high capacity and rate performance to further meet the requirements of sustainable development.
Collapse
Affiliation(s)
- Li Sun
- School of Physics and Technology, and MOE Key Laboratory of Artificial Micro, and Nano-structures, Wuhan University, Wuhan 430072, China
| | - Qiang Fu
- Center for Electron Microscopy, Wuhan University, Wuhan 430072, China
| | - Chunxu Pan
- School of Physics and Technology, and MOE Key Laboratory of Artificial Micro, and Nano-structures, Wuhan University, Wuhan 430072, China; Center for Electron Microscopy, Wuhan University, Wuhan 430072, China.
| |
Collapse
|
14
|
Redondo E, Pumera M. MXene-functionalised 3D-printed electrodes for electrochemical capacitors. Electrochem commun 2021. [DOI: 10.1016/j.elecom.2021.106920] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/22/2022] Open
|
15
|
Zheng W, Halim J, El Ghazaly A, Etman AS, Tseng EN, Persson POÅ, Rosen J, Barsoum MW. Flexible Free-Standing MoO 3/Ti 3C 2T z MXene Composite Films with High Gravimetric and Volumetric Capacities. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:2003656. [PMID: 33552874 PMCID: PMC7856882 DOI: 10.1002/advs.202003656] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/25/2020] [Indexed: 05/23/2023]
Abstract
Enhancing both the energy storage and power capabilities of electrochemical capacitors remains a challenge. Herein, Ti3C2T z MXene is mixed with MoO3 nanobelts in various mass ratios and the mixture is used to vacuum filter binder free, open, flexible, and free-standing films. The conductive Ti3C2T z flakes bridge the nanobelts, facilitating electron transfer; the randomly oriented, and interconnected, MoO3 nanobelts, in turn, prevent the restacking of the Ti3C2T z nanosheets. Benefitting from these advantages, a MoO3/Ti3C2T z film with a 8:2 mass ratio exhibits high gravimetric/volumetric capacities with good cyclability, namely, 837 C g-1 and 1836 C cm-3 at 1 A g-1 for an ≈ 10 µm thick film; and 767 C g-1 and 1664 C cm-3 at 1 A g-1 for ≈ 50 µm thick film. To further increase the energy density, hybrid capacitors are fabricated with MoO3/Ti3C2T z films as the negative electrodes and nitrogen-doped activated carbon as the positive electrodes. This device delivers maximum gravimetric/volumetric energy densities of 31.2 Wh kg-1 and 39.2 Wh L-1, respectively. The cycling stability of 94.2% retention ratio after 10 000 continuous charge/discharge cycles is also noteworthy. The high energy density achieved in this work can pave the way for practical applications of MXene-containing materials in energy storage devices.
Collapse
Affiliation(s)
- Wei Zheng
- Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköping581 83Sweden
| | - Joseph Halim
- Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköping581 83Sweden
| | - Ahmed El Ghazaly
- Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköping581 83Sweden
| | - Ahmed S. Etman
- Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköping581 83Sweden
| | - Eric Nestor Tseng
- Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköping581 83Sweden
| | - Per O. Å. Persson
- Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköping581 83Sweden
| | - Johanna Rosen
- Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköping581 83Sweden
| | - Michel W. Barsoum
- Department of Physics, Chemistry and Biology (IFM)Linköping UniversityLinköping581 83Sweden
- Department of Materials Science and EngineeringDrexel UniversityPhiladelphiaPA19104USA
| |
Collapse
|
16
|
Zheng W, Halim J, Etman AS, Ghazaly AE, Rosen J, Barsoum MW. Boosting the volumetric capacitance of MoO3-x free-standing films with Ti3C2 MXene. Electrochim Acta 2021. [DOI: 10.1016/j.electacta.2020.137665] [Citation(s) in RCA: 19] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
|
17
|
Forouzandeh P, Pillai SC. Two-dimensional (2D) electrode materials for supercapacitors. ACTA ACUST UNITED AC 2021. [DOI: 10.1016/j.matpr.2020.05.233] [Citation(s) in RCA: 20] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
|
18
|
Chen X, Liu Y, Zhou Q, Su F. Facile Synthesis of MnO
2
/Ti
3
C
2
T
x
/CC as Positive Electrode of All‐Solid‐State Flexible Asymmetric Supercapacitor. ChemistrySelect 2020. [DOI: 10.1002/slct.202004181] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Xiuhang Chen
- School of Mechanical and Automotive Engineering South China University of Technology Guangzhou 510640 China
| | - Yong Liu
- China Electronic Product Reliability and Environment Testing Research Institute Guangzhou 510610 China
| | - Qiang Zhou
- School of Mechanical and Automotive Engineering South China University of Technology Guangzhou 510640 China
| | - Fenghua Su
- School of Mechanical and Automotive Engineering South China University of Technology Guangzhou 510640 China
| |
Collapse
|
19
|
Qian A, Pang Y, Wang G, Hao Y, Liu Y, Shi H, Chung CH, Du Z, Cheng F. Pseudocapacitive Charge Storage in MXene-V 2O 5 for Asymmetric Flexible Energy Storage Devices. ACS APPLIED MATERIALS & INTERFACES 2020; 12:54791-54797. [PMID: 33231415 DOI: 10.1021/acsami.0c16959] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Pseudocapacitive asymmetric supercapacitors are promising candidates for achieving high energy density in flexible energy storage devices. However, seeking suitable positive electrode materials that are compatible with negative electrode materials remains a considerable challenge. In the current study, a pseudocapacitive Ti3C2Tx MXene used as negative electrodes is rationally compatible with redox-type V2O5 as positive electrodes, resulting in the assembly of an all-pseudocapacitive Ti3C2Tx MXene//V2O5 asymmetric flexible energy storage device. The solid-state asymmetric device can deliver an energy density of 8.33 mW h cm-3 at a current density of 0.5 A g-1. Moreover, it can operate in an expanded voltage window of 1.5 V, with dominant surface-capacitive charge-storage mechanisms. Additionally, the device can power a yellow light-emitting diode for up to 7 s, indicating the potential of the device for use in practical applications. This study demonstrates the possibility of using other two-dimensional transition-metal carbide nanosheets for high-energy density flexible energy storage devices.
Collapse
Affiliation(s)
- Aniu Qian
- Institute of Resources and Environment Engineering, Shanxi University, Taiyuan 030006, P. R. China
| | - Yiwei Pang
- Institute of Resources and Environment Engineering, Shanxi University, Taiyuan 030006, P. R. China
| | - Guangyu Wang
- School of Chemistry and Chemical Engineering, Institute of Molecular Science, Shanxi University, Taiyuan 030006, P. R. China
| | - Yuehui Hao
- Institute of Resources and Environment Engineering, Shanxi University, Taiyuan 030006, P. R. China
| | - Yiming Liu
- School of Chemistry and Chemical Engineering, Institute of Molecular Science, Shanxi University, Taiyuan 030006, P. R. China
| | - Hu Shi
- School of Chemistry and Chemical Engineering, Institute of Molecular Science, Shanxi University, Taiyuan 030006, P. R. China
| | - Chan-Hwa Chung
- School of Chemical Engineering, Sungkyunkwan University, Suwon 16419, Republic of Korea
| | - Zhiping Du
- Institute of Resources and Environment Engineering, Shanxi University, Taiyuan 030006, P. R. China
| | - Fangqin Cheng
- Institute of Resources and Environment Engineering, Shanxi University, Taiyuan 030006, P. R. China
| |
Collapse
|
20
|
Vaghasiya JV, Mayorga-Martinez CC, Sofer Z, Pumera M. MXene-Based Flexible Supercapacitors: Influence of an Organic Ionic Conductor Electrolyte on the Performance. ACS APPLIED MATERIALS & INTERFACES 2020; 12:53039-53048. [PMID: 33175496 DOI: 10.1021/acsami.0c12879] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
Owing to the rise of miniaturized wearable electronic devices in the last decade, significant demands have arisen to obtain high-performance flexible supercapacitors (FSCs). Recently, a lot of research has been focused on developing smart components of FSCs and integrating them into new device configurations. In this work, FSCs based on a Ti3C2 nanosheet (NS) and an organic ionic conductor (OIC)-induced hydrogel as the electrode and the electrolyte, respectively, were used. The FSCs fabricated have three different configurations (sandwich, twisted fiber, and interdigitated) and a comparative study of their electrochemical performance was investigated in terms of cycle stability, bending stability, power density, and energy density. Finally, the experimental validation of practical application was conducted, which suggested excellent electrochemical stability of Ti3C2 NS FSCs for driven commercial electronic gadgets. This study presents mechanically robust, lightweight, high-performance FSCs, which can be assembled in different configurations for powering wearable electronic devices.
Collapse
Affiliation(s)
- Jayraj V Vaghasiya
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Prague 166 28, Czech Republic
| | - Carmen C Mayorga-Martinez
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Prague 166 28, Czech Republic
| | - Zdenek Sofer
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Prague 166 28, Czech Republic
| | - Martin Pumera
- Center for Advanced Functional Nanorobots, Department of Inorganic Chemistry, Faculty of Chemical Technology, University of Chemistry and Technology Prague, Technická 5, Prague 166 28, Czech Republic
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonseiro, Seodaemun-gu, Seoul 03722, Korea
- Department of Medical Research, China Medical University Hospital, China Medical University, No. 91 Hsueh-Shih Road, Taichung 40402, Taiwan
- Future Energy and Innovation Lab, Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 612 00, Czech Republic
| |
Collapse
|
21
|
Hussain S, Rabani I, Vikraman D, Feroze A, Ali M, Seo YS, Kim HS, Chun SH, Jung J. One-Pot Synthesis of W 2C/WS 2 Hybrid Nanostructures for Improved Hydrogen Evolution Reactions and Supercapacitors. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E1597. [PMID: 32823986 PMCID: PMC7466642 DOI: 10.3390/nano10081597] [Citation(s) in RCA: 27] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/11/2020] [Revised: 08/12/2020] [Accepted: 08/12/2020] [Indexed: 12/20/2022]
Abstract
Tungsten sulfide (WS2) and tungsten carbide (W2C) are materialized as the auspicious candidates for various electrochemical applications, owing to their plentiful active edge sites and better conductivity. In this work, the integration of W2C and WS2 was performed by using a simple chemical reaction to form W2C/WS2 hybrid as a proficient electrode for hydrogen evolution and supercapacitors. For the first time, a W2C/WS2 hybrid was engaged as a supercapacitor electrode and explored an incredible specific capacitance of ~1018 F g-1 at 1 A g-1 with the outstanding robustness. Furthermore, the constructed symmetric supercapacitor using W2C/WS2 possessed an energy density of 45.5 Wh kg-1 at 0.5 kW kg-1 power density. For hydrogen evolution, the W2C/WS2 hybrid produced the low overpotentials of 133 and 105 mV at 10 mA cm-2 with the small Tafel slopes of 70 and 84 mV dec-1 in acidic and alkaline media, respectively, proving their outstanding interfaced electrocatalytic characteristics. The engineered W2C/WS2-based electrode offered the high-performance for electrochemical energy applications.
Collapse
Affiliation(s)
- Sajjad Hussain
- Hybrid Materials Center (HMC), Sejong University, Seoul 05006, Korea;
- Department of Nano and Advanced Materials Engineering, Sejong University, Seoul 05006, Korea; (I.R.); (Y.-S.S.)
| | - Iqra Rabani
- Department of Nano and Advanced Materials Engineering, Sejong University, Seoul 05006, Korea; (I.R.); (Y.-S.S.)
| | - Dhanasekaran Vikraman
- Division of Electronics and Electrical Engineering, Dongguk University-Seoul, Seoul 04620, Korea; (D.V.); (H.-S.K.)
| | - Asad Feroze
- Department of Physics, Sejong University, Seoul 05006, Korea; (A.F.); (S.-H.C.)
| | - Muhammad Ali
- Center of Research Excellence in Nanotechnology (CENT), King Fahd University of Petroleum and Minerals (KFUPM), Dhahran 31261, Saudi Arabia;
| | - Young-Soo Seo
- Department of Nano and Advanced Materials Engineering, Sejong University, Seoul 05006, Korea; (I.R.); (Y.-S.S.)
| | - Hyun-Seok Kim
- Division of Electronics and Electrical Engineering, Dongguk University-Seoul, Seoul 04620, Korea; (D.V.); (H.-S.K.)
| | - Seung-Hyun Chun
- Department of Physics, Sejong University, Seoul 05006, Korea; (A.F.); (S.-H.C.)
| | - Jongwan Jung
- Hybrid Materials Center (HMC), Sejong University, Seoul 05006, Korea;
- Department of Nano and Advanced Materials Engineering, Sejong University, Seoul 05006, Korea; (I.R.); (Y.-S.S.)
| |
Collapse
|
22
|
Study on Direct Synthesis of Energy Efficient Multifunctional Polyaniline-Graphene Oxide Nanocomposite and Its Application in Aqueous Symmetric Supercapacitor Devices. NANOMATERIALS 2020; 10:nano10010118. [PMID: 31936220 PMCID: PMC7022722 DOI: 10.3390/nano10010118] [Citation(s) in RCA: 34] [Impact Index Per Article: 8.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/12/2019] [Revised: 12/31/2019] [Accepted: 01/03/2020] [Indexed: 12/22/2022]
Abstract
The synthesis of promising nanocomposite materials can always be tricky and depends a lot on the method of synthesis itself. Developing such synthesis routes, which are not only simple but also can effectively catch up the synergy of the compositing material, is definitely a worthy contribution towards nanomaterial science. Carbon-based materials, such as graphene oxide, and conjugative polymers, such as conductive polyaniline, are considered materials of the 21st century. This study involves a simple one pot synthesis route for obtaining a nanocomposite of polyaniline and graphene oxide with synergistic effects. The study was carried out in a systematic way by gradually changing the composition of the ingredients in the reaction bath until the formation of nanocomposite took place at some particular reaction parameters. These nanocomposites were then utilized for the fabrication of electrodes for aqueous symmetric supercapacitor devices utilizing gold or copper as current collectors. The device manifested a good capacitance value of 264 F/g at 1 A/g, magnificent rate performance, and capacitance retention of 84.09% at a high current density (10 A/g) when gold sheet electrodes were used as the current collectors. It also showed a capacitance retention of 79.83% and columbic efficiency of 99.83% after 2000 cycles.
Collapse
|
23
|
Hu M, Zhang H, Hu T, Fan B, Wang X, Li Z. Emerging 2D MXenes for supercapacitors: status, challenges and prospects. Chem Soc Rev 2020; 49:6666-6693. [DOI: 10.1039/d0cs00175a] [Citation(s) in RCA: 205] [Impact Index Per Article: 51.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
This review provides a comprehensive understanding of the emerging 2D MXene electrode materials for supercapacitor application.
Collapse
Affiliation(s)
- Minmin Hu
- Shenyang National Laboratory for Materials Science
- Institute of Metal Research
- Chinese Academy of Sciences
- Shenyang
- China
| | - Hui Zhang
- Energy Geoscience Division Lawrence Berkeley National Laboratory
- USA
| | - Tao Hu
- Institute for Materials Science and Devices
- Suzhou University of Science and Technology
- Suzhou
- China
| | - Bingbing Fan
- School of Materials Science and Engineering
- Zhengzhou University
- Zhengzhou, 450001
- China
| | - Xiaohui Wang
- Shenyang National Laboratory for Materials Science
- Institute of Metal Research
- Chinese Academy of Sciences
- Shenyang
- China
| | - Zhenjiang Li
- School of Materials Science and Engineering
- Qingdao University of Science and Technology
- Qingdao
- China
| |
Collapse
|
24
|
Achieving Ultrahigh Cycling Stability and Extended Potential Window for Supercapacitors through Asymmetric Combination of Conductive Polymer Nanocomposite and Activated Carbon. Polymers (Basel) 2019; 11:polym11101678. [PMID: 31615090 PMCID: PMC6835797 DOI: 10.3390/polym11101678] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/12/2019] [Revised: 10/04/2019] [Accepted: 10/08/2019] [Indexed: 11/22/2022] Open
Abstract
Conducting polymers and carbon-based materials such as graphene oxide (GO) and activated carbon (AC) are the most promising capacitive materials, though both offer charge storage through different mechanisms. However, their combination can lead to some unusual results, offering improvement in certain properties in comparison with the individual materials. Cycling stability of supercapacitors devices is often a matter of concern, and extensive research is underway to improve this phenomena of supercapacitive devices. Herein, a high-performance asymmetric supercapacitor device was fabricated using graphene oxide–polyaniline (GO@PANI) nanocomposite as positive electrode and activated carbon (AC) as negative electrode. The device showed 142 F g−1 specific capacitance at 1 A g−1 current density with capacitance retention of 73.94% at higher current density (10 A g−1). Most importantly, the device exhibited very high electrochemical cycling stability. It retained 118.6% specific capacitance of the starting value after 10,000 cycles at 3 Ag−1 and with coulombic efficiency of 98.06 %, indicating great potential for practical applications. Very small solution resistance (Rs, 0.640 Ω) and charge transfer resistance (Rct, 0.200 Ω) were observed hinting efficient charge transfer and fast ion diffusion. Due to asymmetric combination, potential window was extended to 1.2 V in aqueous electrolyte, as a result higher energy density (28.5 Wh kg−1) and power density of 2503 W kg−1 were achieved at the current density 1 Ag−1. It also showed an aerial capacitance of 57 mF cm−2 at current 3.2 mA cm−2. At this current density, its energy density was maximum (0.92 mWh cm−2) with power density (10.47 W cm−2).
Collapse
|
25
|
High performance asymmetric supercapacitor having novel 3D networked polypyrrole nanotube/N-doped graphene negative electrode and core-shelled MoO3/PPy supported MoS2 positive electrode. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2019.07.044] [Citation(s) in RCA: 45] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/17/2023]
|
26
|
Two-dimensional molybdenum diselenide nanosheets as a novel electrode material for symmetric supercapacitors using organic electrolyte. Electrochim Acta 2019. [DOI: 10.1016/j.electacta.2018.10.191] [Citation(s) in RCA: 37] [Impact Index Per Article: 7.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
27
|
Fabrication of 9.6 V High-performance Asymmetric Supercapacitors Stack Based on Nickel Hexacyanoferrate-derived Ni(OH) 2 Nanosheets and Bio-derived Activated Carbon. Sci Rep 2019; 9:1104. [PMID: 30705312 PMCID: PMC6355786 DOI: 10.1038/s41598-018-37566-8] [Citation(s) in RCA: 34] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/17/2018] [Accepted: 12/10/2018] [Indexed: 11/17/2022] Open
Abstract
Hydrated Ni(OH)2 and activated carbon based electrodes are widely used in electrochemical applications. Here we report the fabrication of symmetric supercapacitors using Ni(OH)2 nanosheets and activated carbon as positive and negative electrodes in aqueous electrolyte, respectively. The asymmetric supercapacitors stack connected in series exhibited a stable device voltage of 9.6 V and delivered a stored high energy and power of 30 mWh and 1632 mW, respectively. The fabricated device shows an excellent electrochemical stability and high retention of 81% initial capacitance after 100,000 charge-discharges cycling at high charging current of 500 mA. The positive electrode material Ni(OH)2 nanosheets was prepared through chemical decomposition of nickel hexacyanoferrate complex. The XRD pattern revealed the high crystalline nature of Ni(OH)2 with an average crystallite size of ~10 nm. The nitrogen adsorption-desorption isotherms of Ni(OH)2 nanosheets indicate the formation of mesoporous Ni(OH)2 nanosheets. The chemical synthesis of Ni(OH)2 results the formation of hierarchical nanosheets that are randomly oriented which was confirmed by FE-SEM and HR-TEM analysis. The negative electrode, activated porous carbon (OPAA-700) was obtained from orange peel waste. The electrochemical properties of Ni(OH)2 nanosheets and OPAA-700 were studied and exhibit a high specific capacity of 1126 C/g and high specific capacitance of 311 F/g at current density of 2 A/g, respectively. Ni(OH)2 nanosheets delivered a good rate performance and remarkable capacitance retention of 96% at high current density of 32 A/g.
Collapse
|
28
|
Pang J, Mendes RG, Bachmatiuk A, Zhao L, Ta HQ, Gemming T, Liu H, Liu Z, Rummeli MH. Applications of 2D MXenes in energy conversion and storage systems. Chem Soc Rev 2019; 48:72-133. [DOI: 10.1039/c8cs00324f] [Citation(s) in RCA: 978] [Impact Index Per Article: 195.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
This article provides a comprehensive review of MXene materials and their energy-related applications.
Collapse
Affiliation(s)
- Jinbo Pang
- The Leibniz Institute for Solid State and Materials Research Dresden (IFW Dresden)
- Dresden
- Germany
- Institute for Advanced Interdisciplinary Research (iAIR)
- University of Jinan
| | - Rafael G. Mendes
- The Leibniz Institute for Solid State and Materials Research Dresden (IFW Dresden)
- Dresden
- Germany
- Soochow Institute for Energy and Materials InnovationS (SIEMIS)
- Optoelectronics and Energy & Collaborative Innovation Center of Suzhou Nano Science and Technology, and Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province
| | - Alicja Bachmatiuk
- The Leibniz Institute for Solid State and Materials Research Dresden (IFW Dresden)
- Dresden
- Germany
- Soochow Institute for Energy and Materials InnovationS (SIEMIS)
- Optoelectronics and Energy & Collaborative Innovation Center of Suzhou Nano Science and Technology, and Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province
| | - Liang Zhao
- Soochow Institute for Energy and Materials InnovationS (SIEMIS)
- Optoelectronics and Energy & Collaborative Innovation Center of Suzhou Nano Science and Technology, and Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province
- School of Energy
- Soochow University
- Suzhou
| | - Huy Q. Ta
- Soochow Institute for Energy and Materials InnovationS (SIEMIS)
- Optoelectronics and Energy & Collaborative Innovation Center of Suzhou Nano Science and Technology, and Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province
- School of Energy
- Soochow University
- Suzhou
| | - Thomas Gemming
- The Leibniz Institute for Solid State and Materials Research Dresden (IFW Dresden)
- Dresden
- Germany
| | - Hong Liu
- Institute for Advanced Interdisciplinary Research (iAIR)
- University of Jinan
- Jinan 250022
- China
- State Key Laboratory of Crystal Materials
| | - Zhongfan Liu
- Soochow Institute for Energy and Materials InnovationS (SIEMIS)
- Optoelectronics and Energy & Collaborative Innovation Center of Suzhou Nano Science and Technology, and Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province
- School of Energy
- Soochow University
- Suzhou
| | - Mark H. Rummeli
- The Leibniz Institute for Solid State and Materials Research Dresden (IFW Dresden)
- Dresden
- Germany
- Soochow Institute for Energy and Materials InnovationS (SIEMIS)
- Optoelectronics and Energy & Collaborative Innovation Center of Suzhou Nano Science and Technology, and Key Laboratory of Advanced Carbon Materials and Wearable Energy Technologies of Jiangsu Province
| |
Collapse
|
29
|
Mohammad Shiri H, Ehsani A, Behjatmanesh-Ardakani R. Electrochemical deposition and plane-wave periodic DFT study on Dy2O3 nanoparticles and pseudocapacitance performance of Dy2O3/conductive polymer nanocomposite film. J Taiwan Inst Chem Eng 2018. [DOI: 10.1016/j.jtice.2018.09.017] [Citation(s) in RCA: 22] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
|
30
|
Ajdari FB, Kowsari E, Ehsani A, Schorowski M, Ameri T. New synthesized ionic liquid functionalized graphene oxide: Synthesis, characterization and its nanocomposite with conjugated polymer as effective electrode materials in an energy storage device. Electrochim Acta 2018. [DOI: 10.1016/j.electacta.2018.09.177] [Citation(s) in RCA: 57] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
|
31
|
Sanati S, Rezvani Z. Ultrasound-assisted synthesis of NiFe- layered double hydroxides as efficient electrode materials in supercapacitors. ULTRASONICS SONOCHEMISTRY 2018; 48:199-206. [PMID: 30080543 DOI: 10.1016/j.ultsonch.2018.05.035] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/02/2018] [Revised: 05/28/2018] [Accepted: 05/29/2018] [Indexed: 06/08/2023]
Abstract
Under ultrasound irradiation, NiFe-layered double hydroxide (NiFe-LDH) nanostructures with three molar ratios and three dissimilar reaction times were prepared. The powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and Fourier transform infrared spectroscopy (FT-IR) were employed to characterize the synthesized nanomaterials. Using a sonochemichal route, various morphologies of the NiFe-LDH nanostructures without any impurity and variations in the structure were produced. During the optimization process, it was found that sonication time and reagent concentration in a fixed irradiation frequency can affect the size and the morphology of the produced nanostructures. Under ultrasound irradiation, non-aggregated particles with uniform, spherical morphology were obtained with molar ratios of 4:1 (Ni:Fe) with 45 W at 180 min. The NiFe-LDH samples were observed to be supercapacitor under a 6 M KOH solution. When morphologically-controlled NiFe-LDH samples were used, the pseudo-capacitive behavior of the nanostructures was tuned. After 3 h of ultrasonic irradiation, the optimized sample (NiFe-LDH spherical nanostructures with 4:1 M ratio) had a high value of specific capacitance (168F g-1).
Collapse
Affiliation(s)
- Soheila Sanati
- Inorganic Chemistry Laboratory, Department of Chemistry, Faculty of Sciences, Azarbaijan Shahid Madani University, Tabriz 53714-161, Iran
| | - Zolfaghar Rezvani
- Inorganic Chemistry Laboratory, Department of Chemistry, Faculty of Sciences, Azarbaijan Shahid Madani University, Tabriz 53714-161, Iran.
| |
Collapse
|
32
|
Fu J, Yun J, Wu S, Li L, Yu L, Kim KH. Architecturally Robust Graphene-Encapsulated MXene Ti 2CT x@Polyaniline Composite for High-Performance Pouch-Type Asymmetric Supercapacitor. ACS APPLIED MATERIALS & INTERFACES 2018; 10:34212-34221. [PMID: 30238743 DOI: 10.1021/acsami.8b10195] [Citation(s) in RCA: 44] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
A harmonized three-component composite system which preserves the characteristics of individual components is of interest in the field of energy storage. Here, we present a graphene-encapsulated MXene Ti2CT x@polyaniline composite (GMP) material realized in a systematically stable configuration with different ternary nanomaterials for supercapacitor electrodes. Due to the different ζ-potentials in a high-pH solution, chemically converted graphene (negatively charged) is thoroughly unfolded to allow full encapsulation, but the MXene Ti2CT x@polyaniline composite with a low positive ζ-potential is easily attracted toward a counter-charged substance. The obtained GMP electrode exhibits improved cycling stability and better electrochemical performance owing to the use of mechanically robust and chemically inert graphene and the densely intercalated conductive polyaniline between the multilayer MXenes. The GMP electrode has a high gravimetric capacitance of 635 F g-1 (volumetric capacitance of 1143 F cm-3) at a current density of 1 A g-1 with excellent cycling stability of 97.54% after 10 000 cycles. Furthermore, the asymmetric pouch-type supercapacitor assembled using the GMP as a positive electrode and graphene as a negative electrode yields a high energy density of 42.3 Wh kg-1 at a power density of 950 W kg-1 and remarkable cycling stability (94.25% after 10 000 cycles at 10 A g-1).
Collapse
|
33
|
Chang TH, Zhang T, Yang H, Li K, Tian Y, Lee JY, Chen PY. Controlled Crumpling of Two-Dimensional Titanium Carbide (MXene) for Highly Stretchable, Bendable, Efficient Supercapacitors. ACS NANO 2018; 12:8048-8059. [PMID: 30067908 DOI: 10.1021/acsnano.8b02908] [Citation(s) in RCA: 48] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Two-dimensional MXene materials have demonstrated attractive electrical and electrochemical properties in energy storage applications. Adding stretchability to MXene remains challenging due to its high mechanical stiffness and weak intersheet interaction, so the assembling techniques for mechanically stable MXene architectures require further development. We report a simple fabrication by harnessing the interfacial instability to generate higher dimensional MXene nanocoatings capable of programmed crumpling/unfolding. A sequential patterning approach enabled the design of sequence-dependent MXene textures across multiple length scales, which were utilized for controllable wetting surfaces and high-areal-capacitance electrodes. We next transferred the crumpled MXene nanocoating onto an elastomer to fabricate an MXene/elastomer electrode with high stretchability. The accordion-like MXene can be reversibly folded/unfolded and still preserve efficient specific capacitances. We further fabricated asymmetric MXene supercapacitors, and the devices demonstrated efficient electrochemical performance and large deformability (180° bendability, 100% stretchability). Our texturing techniques can be applied to large MXene families for designing stretchable architectures in wearable electronics.
Collapse
Affiliation(s)
- Ting-Hsiang Chang
- Department of Chemical and Biomolecular Engineering , National University of Singapore , Singapore 117585 , Singapore
| | - Tianran Zhang
- Department of Chemical and Biomolecular Engineering , National University of Singapore , Singapore 117585 , Singapore
| | - Haitao Yang
- Department of Chemical and Biomolecular Engineering , National University of Singapore , Singapore 117585 , Singapore
| | - Kerui Li
- Department of Chemical and Biomolecular Engineering , National University of Singapore , Singapore 117585 , Singapore
| | - Yuan Tian
- Department of Chemical and Biomolecular Engineering , National University of Singapore , Singapore 117585 , Singapore
| | - Jim Yang Lee
- Department of Chemical and Biomolecular Engineering , National University of Singapore , Singapore 117585 , Singapore
| | - Po-Yen Chen
- Department of Chemical and Biomolecular Engineering , National University of Singapore , Singapore 117585 , Singapore
| |
Collapse
|
34
|
Sahoo S, Krishnamoorthy K, Pazhamalai P, Kim SJ. Copper molybdenum sulfide anchored nickel foam: a high performance, binder-free, negative electrode for supercapacitors. NANOSCALE 2018; 10:13883-13888. [PMID: 29995042 DOI: 10.1039/c8nr03998d] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Herein, we are demonstrating the use of a binder-free electrode based on copper-molybdenum-sulfide nanostructures grown on nickel foam (CMS/Ni) as a novel negative electrode for supercapacitors. The cyclic voltammetry and charge-discharge analyses reveal the pseudocapacitive nature of the CMS/Ni electrode with a high specific capacity of 633 mAh g-1 (∼20-fold higher than the binder-based CMS electrode) which is mainly due to their superior electronic conductivity and short ion transport pathways. Furthermore, the fabricated symmetric supercapacitor using the CMS/Ni electrode delivered a high device capacitance (265.62 F g-1), high energy density (23.61 Wh kg-1) and long cycle-life. The results ensure that the CMS/Ni binder-free electrode will be a promising negative electrode for high-performance supercapacitors.
Collapse
Affiliation(s)
- Surjit Sahoo
- Nanomaterials and System Lab, Department of Mechatronics Engineering, Jeju National University, Jeju 63243, Republic of Korea.
| | - Karthikeyan Krishnamoorthy
- Nanomaterials and System Lab, Department of Mechatronics Engineering, Jeju National University, Jeju 63243, Republic of Korea.
| | - Parthiban Pazhamalai
- Nanomaterials and System Lab, Department of Mechatronics Engineering, Jeju National University, Jeju 63243, Republic of Korea.
| | - Sang-Jae Kim
- Nanomaterials and System Lab, Department of Mechatronics Engineering, Jeju National University, Jeju 63243, Republic of Korea. and Department of Advanced Convergence Science and Technology, Jeju National University, Jeju 63243, Republic of Korea
| |
Collapse
|