Hierarchical architecture of coupling graphene and 2D WS2 for high-performance supercapacitor

Hierarchically Structured Graphene Aerogel Supported Nickel-Cobalt Oxide Nanowires as an Efficient Electrocatalyst for Oxygen Evolution Reaction

The rational design of a heterostructure electrocatalyst is an attractive strategy to produce hydrogen energy by electrochemical water splitting. Herein, we have constructed hierarchically structured architectures by immobilizing nickel-cobalt oxide nanowires on/beneath the surface of reduced graphene aerogels (NiCoO2/rGAs) through solvent-thermal and activation treatments. The morphological structure of NiCoO2/rGAs was characterized by microscopic analysis, and the porous structure not only accelerates the electrolyte ion diffusion but also prevents the agglomeration of NiCoO2 nanowires, which is favorable to expose the large surface area and active sites. As further confirmed by the spectroscopic analysis, the tuned surface chemical state can boost the catalytic active sites to show the improved oxygen evolution reaction performance in alkaline electrolytes. Due to the synergistic effect of morphology and composition effect, NiCoO2/rGAs show the overpotential of 258 mV at the current density of 10 mA cm-2. Meanwhile, the small values of the Tafel slope and charge transfer resistance imply that NiCoO2/rGAs own fast kinetic behavior during the OER test. The overlap of CV curves at the initial and 1001st cycles and almost no change in current density after the chronoamperometric (CA) test for 10 h confirm that NiCoO2/rGAs own exceptional catalytic stability in a 1 M KOH electrolyte. This work provides a promising way to fabricate the hierarchically structured nanomaterials as efficient electrocatalysts for hydrogen production.

Hybrid and Asymmetric Supercapacitors: Achieving Balanced Stored Charge across Electrode Materials

An electrochemical capacitor configuration extends its operational potential window by leveraging diverse charge storage mechanisms on the positive and negative electrodes. Beyond harnessing capacitive, pseudocapacitive, or Faradaic energy storage mechanisms and enhancing electrochemical performance at high rates, achieving a balance of stored charge across electrodes poses a significant challenge over a wide range of charge-discharge currents or sweep rates. Consequently, fabricating hybrid and asymmetric supercapacitors demands precise electrochemical evaluations of electrode materials and the development of a reliable methodology. This work provides an overview of fundamental aspects related to charge-storage mechanisms and electrochemical methods, aiming to discern the contribution of each process. Subsequently, the electrochemical properties, including the working potential windows, rate capability profiles, and stabilities, of various families of electrode materials are explored. It is then demonstrated, how charge balancing between electrodes falters across a broad range of charge-discharge currents or sweep rates. Finally, a methodology for achieving charge balance in hybrid and asymmetric supercapacitors is proposed, outlining multiple conditions dependent on loaded mass and charge-discharge current. Two step-by-step tutorials and model examples for applying this methodology are also provided. The proposed methodology is anticipated to stimulate continued dialogue among researchers, fostering advancements in achieving stable and high-performance supercapacitor devices.

Experimental and theoretical insights into the supercapacitive performance of interconnected WS2 nanosheets

Transition metal dichalcogenides (TMDs) are fascinating and prodigious considerations in the electrochemical energy storage sector because of their two dimensional chemistry as well as heterogeneous characteristics. Herein, we synthesized interconnected WS2 nanosheets by a hydrothermal method followed by sulphuration at 850 °C in an argon atmosphere. The ultrathin WS2 nanosheet array is endowed with an excellent specific capacitance of 74 F g-1 at the current density of 3 A g-1 up 7000 cycles. Moreover, a symmetric supercapacitor was fabricated using WS2 nanosheets, which provided the admirable high specific capacity of 6.3 F g-1 at 0.05 A g-1 with the energy and power density of 5.6 × 102 mW h kg-1 and 3.6 × 10 5 mW kg-1, respectively. Density functional theory (DFT) simulations revealed the presence of populated energy states near the Fermi level resulting in a high quantum capacitance value, which supports the experimentally achieved high capacitance value. The attained results recommend interconnected WS2 nanosheets as a novel, robust, and low-cost electrode material for supercapacitor energy storage devices.

Strategies for Advanced Supercapacitors Based on 2D Transition Metal Dichalcogenides: From Material Design to Device Setup

Recently, the development of new materials and devices has become the main research focus in the field of energy. Supercapacitors (SCs) have attracted significant attention due to their high power density, fast charge/discharge rate, and excellent cycling stability. With a lamellar structure, 2D transition metal dichalcogenides (2D TMDs) emerge as electrode materials for SCs. Although many 2D TMDs with excellent energy storage capability have been reported, further optimization of electrode materials and devices is still needed for competitive electrochemical performance. Previous reviews have focused on the performance of 2D TMDs as electrode materials in SCs, especially on their modification. Herein, the effects of element doping, morphology, structure and phase, composite, hybrid configuration, and electrolyte are emphatically discussed on the overall performance of 2D TMDs-based SCs from the perspective of device optimization. Finally, the opportunities and challenges of 2D TMDs-based SCs in the field are highlighted, and personal perspectives on methods and ideas for high-performance energy storage devices are provided.

Tailoring the interfacial surfaces of tungsten and molybdenum tungsten disulfide electrodes for hybrid supercapacitors

The layered structures of tungsten disulfide (WS₂) and molybdenum tungsten disulfide (MoWS₂) are considered as the most promising electrode materials for energy storage devices. Herein, MS (magnetron sputtering) is required for the deposition of WS₂ and MoWS₂ on the surface of the current collector to attain an optimized layer thickness. The structural morphology and topological behavior of the sputtered material were examined via X-ray diffraction and atomic force microscopy. Three-electrode assembly was used to start the electrochemical investigations to identify the most optimal and effective sample among WS₂ and MoWS₂. CV (cyclic voltammetry), GCD (galvanostatic charging discharging), and EIS (electro-impedance spectroscopy) techniques were employed to analyze the samples. After preparing WS₂ with optimized thickness as the superior performing sample, a hybrid device was designed as WS₂//AC (activated carbon). With a remarkable cyclic stability of 97% after 3000 continuous cycles, the hybrid supercapacitor generated a maximum energy density (E_s) value of 42.5 W h kg^-1 and 4250 W kg^-1 of power density (P_s). Besides, the capacitive and diffusive contribution during the charge-discharge process and b-values were calculated by Dunn's model, which lay in the 0.5-1.0 range and the fabricated WS₂ hybrid device was found to have a hybrid nature. The outstanding outcomes of WS₂//AC make it suitable for future energy storage applications.

Sodium titanium phosphate nanocube decorated on tablet-like carbon for robust sodium storage performance at low temperature

Sodium-ion batteries, featuring resource abundance and similar working mechanisms to lithium-ion batteries, have gained extensive interest in both scientific exploration and industrial applications. However, the extremely sluggish reaction kinetics of charge carrier (Na+) at subzero temperatures significantly reduces their specific capacities and cycling life. Herein, this study presents a novel hybrid structure with sodium titanium phosphate (NaTi2(PO4)3, NTP) nanocube in-situ decorated on tablet-like carbon (NTP/C), which manifests superior sodium storage performances at low temperatures. At even -25 °C, a stable cycling with a specific capacity of 94.3 mAh/g can still be maintained after 200 cycles at 0.5 A/g, delivering a high capacity retention of 91.5 % compared with that at room temperature, along with an excellent rate capability. Generally, the superionic conductor structure, flat voltage plateaus, as well as the conductive carbonaceous framework can efficiently facilitate the charge transfer, accelerate the diffusion of Na+, and decrease the electrochemical polarization. Moreover, further investigations on diffusion kinetics, solid electrolyte interface layer, and the interaction between NTP and carbonaceous skeleton reveal its high Na+ diffusion coefficient, robust solid electrolyte interface, and strong electronic interaction, thus contributing to the superior capacity retentions at subzero temperatures.

Atomic and structural modifications of two-dimensional transition metal dichalcogenides for various advanced applications

Two-dimensional (2D) transition metal dichalcogenides (TMDs) and their heterostructures have attracted significant interest in both academia and industry because of their unusual physical and chemical properties. They offer numerous applications, such as electronic, optoelectronic, and spintronic devices, in addition to energy storage and conversion. Atomic and structural modifications of van der Waals layered materials are required to achieve unique and versatile properties for advanced applications. This review presents a discussion on the atomic-scale and structural modifications of 2D TMDs and their heterostructures via post-treatment. Atomic-scale modifications such as vacancy generation, substitutional doping, functionalization and repair of 2D TMDs and structural modifications including phase transitions and construction of heterostructures are discussed. Such modifications on the physical and chemical properties of 2D TMDs enable the development of various advanced applications including electronic and optoelectronic devices, sensing, catalysis, nanogenerators, and memory and neuromorphic devices. Finally, the challenges and prospects of various post-treatment techniques and related future advanced applications are addressed.

Facile synthesis of efficient construction of tungsten disulfide/iron cobaltite nanocomposite grown on nickel foam as a battery-type energy material for electrochemical supercapacitors with superior performance

In this research literature, a tungsten disulfide/iron cobaltite (WS₂/FeCo₂O₄) interwoven construction array was prepared by a simplistic hydrothermal approach on Ni foam as an integrative electrode for supercapacitors (SCs). For characterization of the wearing of WS₂ nanostructure on FeCo₂O₄ nanosheets (WS₂/FeCo₂O₄) by the Scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The WS₂/FeCo₂O₄ nanosheets supply a larger surface region and sufficient space to allow for volume changes. Moreover, considerable features of wellbeing conductivity from the Ni foam conductor and the synergistic procedures between WS₂ and FeCo₂O₄, the integrated WS₂/FeCo₂O₄ composite achieved prominent SCs storage performances with a higher specific capacity of 1122C g^-1 (2492.9F g^-1) at 1 A g^-1 and notable capacity retention of 98.1% at 3 A g^-1 after 5000 long cycles and retained higher rate capacity of 951.9 C g^-1 at 15 A g^-1. For practical application, an asymmetric supercapacitors type WS₂/FeCo₂O₄//active carbon (WS₂/FeCo₂O₄//AC) device was successfully prepared. The WS₂/FeCo₂O₄//AC device displays a higher specific capacity of 110C g^-1 and energy density of 85.68 W h kg^-1 at power density at 897.65 W kg^-1, as well as the superior initial capacitance of 98.7% with cyclic stabilities after 4000 long cycles. Thus, these results indicated the great potential of the constructed WS₂/FeCo₂O₄//AC in the scenario electrochemical properties due to their outstanding energy storage activities.

Facile in-situ synthesis of heazlewoodite on nitrogen-doped reduced graphene oxide for enhanced sodium storage

Nickel sulfide based anode materials, featuring rich types, high specific capacities and favorable conversion kinetics, have been proved to be promisingly applied in high-performance sodium-ion batteries (SIBs). Unfortunately, the poor electronic/ionic conductivity, together with the structure change induced degraded capacity upon cycling, restricts their further development. In this work, heazlewoodite nanoparticles decorated on nitrogen doped reduced graphene oxide (Ni₃S₂/NrGO) were fabricated via a facile combined approach with freeze-drying and subsequent in-situ sulfidation. In the obtained hybrid structure, the synergistic effect between Ni₃S₂ and NrGO endows the composite with highly conductive pathways, thus accelerating the charge transfer. Benefitting from the buffering matrix offered by NrGO as well as the tight combination between Ni₃S₂ and NrGO, this novel Ni₃S₂/NrGO demonstrates satisfying sodium storage performance, with a stable reversible capacity of 299.2 mAh g^-1 up to 100 cycles (0.1 A g^-1) and a high initial Coulombic efficiency of 76.8%. Importantly, the rational structure design and synthesis method, as well as the insights on the improved electrochemical performance reported in this work, should be helpful for the development of new-type host materials with high performance for SIBs.

The implementation of graphene-based aerogel in the field of supercapacitor

Graphene and graphene-based hybrid materials have emerged as an outstanding supercapacitor electrode material primarily because of their excellent surface area, high electrical conductivity, and improved thermal, mechanical, electrochemical cycling stabilities. Graphene alone exhibits electric double layer capacitance (EDLC) with low energy density and high power density. The use of aerogels in a supercapacitor is a pragmatic approach due to its extraordinary properties like ultra-lightweight, high porosity and specific surface area. The aerogels encompass a high volume of pores which leads to easy soak by the electrolyte and fast charge-discharge process. Graphene aerogels assembled into three-dimensional (3D) architecture prevent there stacking of graphene sheets and maintain the high surface area and hence excellent cycling stability and rate capacitance. However, the energy density of graphene aerogels is limited due to EDLC type of charge storage mechanism. Consequently, 3D graphene aerogel coupled with pseudocapacitive materials such as transition metal oxides, metal hydroxides, conducting polymers, nitrides, chalcogenides show an efficient energy density and power density performance due to the presence of both types of charge storage mechanisms. This laconic review focuses on the design and development of graphene-based aerogel in the field of the supercapacitor. This review is an erudite article about methods, technology and electrochemical properties of graphene aerogel.

Transition metal dichalcogenide (TMDs) electrodes for supercapacitors: a comprehensive review

As globally, the main focus of the researchers is to develop novel electrode materials that exhibit high energy and power density for efficient performance energy storage devices. This review covers the up-to-date progress achieved in transition metal dichalcogenides (TMDs) (e.g. MoS₂, WS₂, MoSe_2,and WSe₂) as electrode material for supercapacitors (SCs). The TMDs have remarkable properties like large surface area, high electrical conductivity with variable oxidation states. These properties enable the TMDs as the most promising candidates to store electrical energy via hybrid charge storage mechanisms. Consequently, this review article provides a detailed study of TMDs structure, properties, and evolution. The characteristics technique and electrochemical performances of all the efficient TMDs are highlighted meticulously. In brief, the present review article shines a light on the structural and electrochemical properties of TMD electrodes. Furthermore, the latest fabricated TMDs based symmetric/asymmetric SCs have also been reported.

Metallic Transition Metal Dichalcogenides of Group VIB: Preparation, Stabilization, and Energy Applications

Layered transition metal dichalcogenides (TMDs) of group VIB have been widely used in the realms of energy storage and conversions. Along with the existence of semiconducting states, their metallic phases have recently attracted numerous attentions owing to their fascinating physical and chemical properties. Many efforts have been devoted to obtain metallic TMDs with high purity and yield. Nevertheless, such metallic phase is thermodynamically metastable and tends to convert into semiconducting phase, which necessitates the exploration over effective strategies to ensure the stability. In this review, typical fabrication routes are introduced and those critical factors during preparation are elaborately discussed. Moreover, the stabilized strategies are summarized with concrete examples highlighting the key mechanisms toward efficient stabilization. Finally, emerging energy applications are overviewed. This review presents comprehensive research status of metallic group VIB TMDs, aiming to facilitate further scientific investigations and promote future practical applications in the fields of energy storage and conversion.

Three-dimensional nitrogen-doped graphene-based metal-free electrochemical sensors for simultaneous determination of ascorbic acid, dopamine, uric acid, and acetaminophen

Three-dimensional nitrogen-doped graphene (3D-NG) networks, yielded by hydrothermal reaction and freeze-drying treatment, were used as building blocks to construct a metal-free quadruplet electrochemical sensor for simultaneous detection of ascorbic acid (AA), dopamine (DA), uric acid (UA), and acetaminophen (AP). The introduced 3D-NG materials with a 3D porous structure and a nitrogen doping effect were beneficial for the generation of multidimensional electron transfer pathways and the improvement of electrocatalytic activities by modulating their electronic properties, which could contribute to the effective differentiation of the four analytes in their quaternary mixture. Well-resolved oxidation peaks and enhanced response currents of AA, DA, UA, and AP were obtained from the 3D-NG-based electrodes. For the individual determination of one analyte, the linear concentration ranges of AA, DA, UA, and AP were 20-10 000, 1-1000, 0.5-1000, and 0.1-600 μM with detection limits of 3.91, 0.26, 0.12, and 0.02 μM (S/N = 3), respectively. After the synchronous change of the concentrations of AA, DA, UA, and AP, desirable linear relationships were observed in the ranges of 100-7000, 2-600, 1-800, and 10-550 μM with detection limits of 24.33, 0.37, 0.21, and 1.87 μM (S/N = 3), respectively. This sensitive sensing platform was successfully used to monitor AA, DA, UA, and AP in human urine samples, which indicated that 3D-NG could become a promising electrode material for the simultaneous monitoring of multiple electroactive species.

Preparation of hybrid paper electrode based on hexagonal boron nitride integrated graphene nanocomposite for free-standing flexible supercapacitors

Flexible energy storage devices have received great interest due to the increasing demand for wearable and flexible electronic devices with high-power energy sources. Herein, a novel hybrid flexible hexagonal boron nitride integrated graphene paper (BN/GrP) is fabricated from 2D hexagonal boron nitride (h-BN) nanosheets integrated with graphene sheets dispersion via a simple vacuum filtration method. FE-SEM indicated that layered graphene nanosheets tightly confined with h-BN nanosheets. Further, the Raman spectroscopy confirmed successful integration of BN with graphene. As-prepared BN/GrP free-standing flexible conductive paper showed high electrical conductivity of 5.36 × 104 S m-1 with the sheet resistance of 8.87 Ω sq-1. However, after 1000 continuous bending cycles, the BN/GrP sheet resistance increased just about 8.7% which indicated good flexibility of the paper. Furthermore, as-prepared BN/GrP showed excellent specific capacitance of 321.95 F g-1 at current density of 0.5 A g-1. In addition, the power and energy densities were obtained as 3588.3 W kg-1, and 44.7 W h kg-1, respectively. The stability of the prepared flexible electrode was tested in galvanostatic charge/discharge cycles, where the results showed the 96.3% retention even after 6000 cycles. These results exhibited that the proposed BN/GrP may be useful to prepare flexible energy-storage systems.

Boosting Redox-Active Sites of 1T MoS2 Phase by Phosphorus-Incorporated Hierarchical Graphene Architecture for Improved Li Storage Performances

Hybridizing and architecting two kinds of 2D nanomaterials are attractive for energy storage applications. Herein, the chemical and electronic coupling of redox active 1T MoS₂ phase with hierarchical phosphorus-doped graphene architecture (HMPGA) is accomplished by the strong interactions of 2D hybrid colloids. The spectroscopic analyses on the crystal structure, surface morphology, and composition confirm the efficient doping of phosphorus and the hybridization interaction of 1T MoS₂ with the phosphorus-incorporated graphene. The resulting HMPGA anode shows significant improvement in battery performances. The specific capacity is delivered to 1194 mAh g^-1 at 100 mA g^-1 with a cyclability of 93.3% over 600 cycles. This improvement is ascribed to the multicoupling effect arising from the abundant redox-actives sites of 1T MoS₂ phase boosted and stabilized by hierarchically architected, phosphorus-doped graphenes.

One-Pot Synthesis of W2C/WS2 Hybrid Nanostructures for Improved Hydrogen Evolution Reactions and Supercapacitors

Tungsten sulfide (WS2) and tungsten carbide (W2C) are materialized as the auspicious candidates for various electrochemical applications, owing to their plentiful active edge sites and better conductivity. In this work, the integration of W2C and WS2 was performed by using a simple chemical reaction to form W2C/WS2 hybrid as a proficient electrode for hydrogen evolution and supercapacitors. For the first time, a W2C/WS2 hybrid was engaged as a supercapacitor electrode and explored an incredible specific capacitance of ~1018 F g-1 at 1 A g-1 with the outstanding robustness. Furthermore, the constructed symmetric supercapacitor using W2C/WS2 possessed an energy density of 45.5 Wh kg-1 at 0.5 kW kg-1 power density. For hydrogen evolution, the W2C/WS2 hybrid produced the low overpotentials of 133 and 105 mV at 10 mA cm-2 with the small Tafel slopes of 70 and 84 mV dec-1 in acidic and alkaline media, respectively, proving their outstanding interfaced electrocatalytic characteristics. The engineered W2C/WS2-based electrode offered the high-performance for electrochemical energy applications.

Two-Dimensional Transition Metal Chalcogenides for Alkali Metal Ions Storage

On the heels of exacerbating environmental concerns and ever-growing global energy demand, development of high-performance renewable energy-storage and -conversion devices has aroused great interest. The electrode materials, which are the critical components in electrochemical energy storage (EES) devices, largely determine the energy-storage properties, and the development of suitable active electrode materials is crucial to achieve efficient and environmentally friendly EES technologies albeit the challenges. Two-dimensional transition-metal chalcogenides (2D TMDs) are promising electrode materials in alkali metal ion batteries and supercapacitors because of ample interlayer space, large specific surface areas, fast ion-transfer kinetics, and large theoretical capacities achieved through intercalation and conversion reactions. However, they generally suffer from low electronic conductivities as well as substantial volume change and irreversible side reactions during the charge/discharge process, which result in poor cycling stability, poor rate performance, and low round-trip efficiency. In this Review, recent advances of 2D TMDs-based electrode materials for alkali metal-ion energy-storage devices with the focus on lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), potassium-ion batteries (PIBs), high-energy lithium-sulfur (Li-S), and lithium-air (Li-O₂ ) batteries are described. The challenges and future directions of 2D TMDs-based electrode materials for high-performance LIBs, SIBs, PIBs, Li-S, and Li-O₂ batteries as well as emerging alkali metal-ion capacitors are also discussed.

Novel WS2-Based Nanofluids for Concentrating Solar Power: Performance Characterization and Molecular-Level Insights

Nano-colloidal suspensions of nanomaterials in a fluid, nanofluids, are appealing because of their interesting properties related to heat transfer processes. While nanomaterials based on transition metal chalcogenides (TMCs) have been widely studied in catalysis, sensing, and energy storage applications, there are few studies of nanofluids based on TMCs for heat transfer applications. In this study, the preparation and analysis of nanofluids based on 2D-WS₂ in a typical heat transfer fluid (HTF) used in concentrating solar power (CSP) plants are reported. Nanofluids prepared using an exfoliation process exhibited well-defined nanosheets and were highly stable. The nanofluids were characterized in terms of properties related to their application in CSP. The presence of WS₂ nanosheets did not modify significantly the surface tension, the viscosity, or the isobaric specific heat, but the thermal conductivity was improved by up to 30%. The U_r factor, which characterizes the thermal efficiency of the fluid in the solar collector, shows an enhancement of up to 22% in the nanofluid, demonstrating great promise for CSP applications. The Reynolds number and friction factor of the fluid were not significantly modified by the addition of the nanomaterial to the HTF, which is also positive for practical applications in CSP plants. Ab initio molecular dynamics simulations of the nanoparticle/fluid interface showed an irreversible dissociative adsorption of diphenyl oxide molecules on the WS₂ edge, with very low kinetic barrier. The resulting "decoration" of the WS₂ edge dramatically affects the nature of the interface interactions and is therefore expected to affect significantly the rheological and transport properties of the nanofluids.

Untapped Potential of Polymorph MoS2: Tuned Cationic Intercalation for High-Performance Symmetric Supercapacitors

Supercapacitors have been the key target as energy storage devices for modern technology that need fast charging. Although supercapacitors have large power density, modifications should be done to manufacture electrodes with high energy density, longer stability, and simple device structure. The polymorph MoS₂ has been one of the targeted materials for supercapacitor electrodes. However, it was hard to tune its phase and stability to achieve the maximum possible efficiency. Herein, we demonstrate the effect of the three main phases of MoS₂ (the stable semiconductor 2H, the metastable semiconductor 3R, and the metastable metallic 1T) on the capacitance performance. The effect of the cation intercalation on the capacitance performance was also studied in Li₂SO₄, Na₂SO₄, and K₂SO₄ electrolytes. The performance of the electrode containing the metallic 1T outperforms those of the 2H and 3R phases in all electrolytes, with the order 1T > 3R > 2H. The 1T/2H phase showed a maximum performance in the K₂SO₄ electrolyte with a specific capacitance of 590 F g^-1 at a scan rate of 5 mV s^-1. MoS₂ showed a good performance in both positive and negative potential windows allowing the fabrication of symmetric supercapacitor devices. The 1T MoS₂ symmetric device showed a power density of 225 W/kg with an energy density of 4.19 Wh/kg. The capacitance retention was 82% after 1000 cycles, which is an outstanding performance for the metastable 1T-containing electrode.

Recent advances in the use of TiO2 nanotube powder in biological, environmental, and energy applications

The use of titanium dioxide nanotubes in the powder form (TNTP) has been a hot topic for the past few decades in many applications. The high quality of the fabricated TNTP by various synthetic routes may meet the required threshold of performance in a plethora of fields such as drug delivery, sensors, supercapacitors, and photocatalytic applications. This review briefly discusses the synthesis techniques of TNTP, their use in various applications, and future perspectives to expand their use in more applications.