Review of nanomaterial aging and transformations through the life cycle of nano-enhanced products

Release of nanoparticle coatings additives from common surfaces via simulated dermal contact

Both nanoparticles (NPs) and nano-enabled products have become widely available in consumer markets in the last decade. Surface coating including paints, stains, and sealants, have seen large increases in the inclusion of nanomaterials in their formulations to increase UV resistance, hydrophobicity, and scratch resistance. Currently, most literature studying the release of NPs and byproducts from coated surfaces has focused exclusively on lumber. In this study, well characterized CeO2 NPs were dispersed in either Milli-Q water, or a commercial paint primer and applied to several test surfaces including sanded plywood, drywall, low density polyethylene, acrylonitrile butadiene styrene, polycarbonate, textured polycarbonate with pebble finish, and glass. Coated surfaces were sampled using a method previously developed by U.S. Consumer Product Safety Commission staff to track the release of NPs via simulated dermal contact. Particular attention has been paid to the total amount, and morphology of material released. The total amount of cerium released from coated surfaces was found to be dependent on both the identity of the test surface, as well as the solution used for coating. Water-based application found 22-50 % of the applied cerium removed during testing, while primer-based application showed released rates ranging between 0.1 and 3 %. Finally, the SEM micrographs presented here suggest the release of microplastic particles during simulated dermal contact with plastic surfaces.

Chitosan-Coated Fosetyl-Al Nanocrystals' Efficacy on Nicotiana tabacum Colonized by Xylella fastidiosa

Xylella fastidiosa (Xf) is a quarantine plant pathogen capable of colonizing the xylem of a wide range of hosts. Currently, there is no cure able to eliminate the pathogen from a diseased plant, but several integrated strategies have been implemented for containing the spread of Xf. Nanotechnology represents an innovative strategy based on the possibility of maximizing the potential antibacterial activity by increasing the surface-to-volume ratio of nanoscale formulations. Nanoparticles based on chitosan and/or fosetyl-Al have shown different in vitro antibacterial efficacy against Xf subsp. fastidiosa (Xff) and pauca (Xfp). This work demonstrated the uptake of chitosan-coated fosetyl-Al nanocrystals (CH-nanoFos) by roots and their localization in the stems and leaves of Olea europaea plants. Additionally, the antibacterial activity of fosetyl-Al, nano-fosetyl, nano-chitosan, and CH-nanoFos was tested on Nicotiana tabacum cultivar SR1 (Petite Havana) inoculated with Xff, Xfp, or Xf subsp. multiplex (Xfm). The bacterial load was evaluated with qPCR, and the results showed that CH-nanoFos was the only treatment able to reduce the colonization of Xff, Xfm, and Xfp in tobacco plants. Additionally, the area under the disease progress curve, used to assess symptom development in tobacco plants inoculated with Xff, Xfm, and Xfp and treated with CH-nanoFos, showed a reduction in symptom development. Furthermore, the twitching assay and bacterial growth under microfluidic conditions confirmed the antibacterial activity of CH-nanoFos.

Interactions shape aquatic microbiome responses to Cu and Au nanoparticle treatments in wetland manipulation experiments

In natural systems, organisms are embedded in complex networks where their physiology and community composition is shaped by both biotic and abiotic factors. Therefore, to assess the ecosystem-level effects of contaminants, we must pair complex, multi-trophic field studies with more targeted hypothesis-driven approaches to explore specific actors and mechanisms. Here, we examine aquatic microbiome responses to long-term additions of commercially-available metallic nanoparticles [copper-based (CuNPs) or gold (AuNPs)] and/or nutrients in complex, wetland mesocosms over 9 months, allowing for a full growth cycle of the aquatic plants. We found that both CuNPs and AuNPs (but not nutrient) treatments showed shifts in microbial communities and populations largely at the end of the experiment, as the aquatic plant community senesced. we examine aquatic microbiomes under chronic dosing of NPs and nutrients Simplified microbe-only or microbe + plant incubations revealed that direct effects of AuNPs on aquatic microbiomes can be buffered by plants (regardless of seasonal As mesocosms were dosed weekly, the absence of water column accumulation indicates the partitioning of both metals into other environmental compartments, mainly the floc and aquatic plants photosynthetically-derived organic matter. Overall, this study identifies the potential for NP environmental impacts to be either suppressed by or propagated across trophic levels via the presence of primary producers, highlighting the importance of organismal interactions in mediating emerging contaminants' ecosystem-wide impacts.

Past progress in environmental nanoanalysis and a future trajectory for atomic mass-spectrometry methods

The development of engineered nanotechnology has necessitated a commensurate maturation of nanoanalysis capabilities. Building off a legacy established by electron microscopy and light-scattering, environmental nanoanalysis has now benefited from ongoing advancements in instrumentation and data analysis, which enable a deeper understanding of nanomaterial properties, behavior, and impacts. Where once environmental nanoparticles and colloids were grouped into broad 'dissolved or particulate' classes that are dependent on a filter size cut-off, now size distributions of submicron particles can be separated and characterized providing a more comprehensive examination of the nanoscale. Inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS), directly coupled to field flow fractionation (FFF-ICP-QMS) or operated in single particle mode (spICP-MS) have spearheaded a revolution in nanoanalysis, enabling research into nanomaterial behavior in environmental and biological systems at expected release concentrations. However, the complexity of the nanoparticle population drives a need to characterize and quantify the multi-element composition of nanoparticles, which has begun to be realized through the application of time-of-flight MS (spICP-TOFMS). Despite its relative infancy, this technique has begun to make significant strides in more fully characterizing particulate systems and expanding our understanding of nanoparticle behavior. Though there is still more work to be done with regards to improving instrumentation and data processing, it is possible we are on the cusp of a new nanoanalysis revolution, capable of broadening our understanding of the size regime between dissolved and bulk particulate compartments of the environment.

Versatile Antibacterial and Antioxidant Bacterial Cellulose@Nanoceria Biotextile: Application in Reusable Antimicrobial Face Masks

Despite considerable interest in medical and pharmaceutical fields, there remains a notable absence of functional textiles that concurrently exhibit antibacterial and antioxidant properties. Herein, a new composite fabric constructed using nanostructured bacterial cellulose (BC) covalently-linked with cerium oxide nanoparticles (BC@CeO2NPs) is introduced. The synthesis of CeO2NPs on the BC is performed via a microwave-assisted, in situ chemical deposition technique, resulting in the formation of mixed valence Ce3+/Ce4+ CeO2NPs. This approach ensures the durability of the composite fabric subjected to multiple washing cycles. The Reactive oxygen species (ROS) scavenging activity of CeO2NPs and their rapid and efficient eradication of >99% model microbes, such as Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus remain unaltered in the composite. To demonstrate the feasibility of incorporating the fabric in marketable products, antimicrobial face masks are fabricated with filter layers made of BC@CeO2NPs cross-linked with propylene or cotton fibers. These masks exhibit complete inhibition of bacterial growth in the three bacterial strains, improved breathability compared to respirator masks and enhanced filtration efficiency compared to single-use surgical face masks. This study provides valuable insights into the development of functional BC@CeO2NPs biotextiles in which design can be extended to the fabrication of medical dressings and cosmetic products with combined antibiotic, antioxidant and anti-inflammatory activities.

Post-Irradiation Behavior of Colored PVA-Based Films Containing Ag Nanoparticles as Radiation Detectors/Exposure Indicators

Ionizing radiation covers a broad spectrum of applications. Since radioactive/radiation pollution is directly related to radiation risk, radiation levels should be strictly controlled. Different detection methods can be applied for radiation registration and monitoring. In this paper, radiation-induced variations in the optical properties of silver-enriched PVA-based hydrogel films with and without azo dye (Toluidine blue O, TBO, and Methyl red, MR) additives were investigated, and the feasibility of these free-standing films to serve as radiation detectors/exposure indicators was assessed. AgNO3 admixed with PVA gel was used as a source for the radiation-induced synthesis of silver nanoparticles (AgNPs) in irradiated gel films. Three types of sensors were prepared: silver-enriched PVA films containing a small amount of glycerol (AgPVAGly); silver-enriched PVA films with toluidine blue adducts (AgPVAGlyTBO); and silver-enriched PVA films with methyl red additives (AgPVAGlyMR). The selection of TBO and MR was based on their sensitivity to irradiation. The irradiation of the samples was performed in TrueBeam2.1 (VARIAN) using 6 MeV photons. Different doses up to 10 Gy were delivered to the films. The sensitivity of the films was assessed by analyzing the characteristic UV-Vis absorbance peaks on the same day as irradiation and 7, 30, 45, 90, and 180 days after irradiation. It was found that the addition of azo dyes led to an enhanced radiation sensitivity of the AgNPs containing films (0.6 Gy-1 for AgPVAGlyTBO and 0.4 Gy-1 for AgPVAGlyMR) irradiated with <2 Gy doses, indicating their applicability as low-dose exposure indicators. The irradiated films were less sensitive to higher doses. Almost no dose fading was detected between the 7th and 45th day after irradiation. Based on the obtained results, competing AgNP formation and color-bleaching effects in the AgPVAGly films with dye additives are discussed.

Everything falls apart: How solids degrade and release nanomaterials, composite fragments, and microplastics

To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies.

Lowering the pH leads to the disaggregation of NiO and ZnO nanoparticles and modifies the mutagenic response

In a changing environmental scenario, acid rain can have a significant impact on aquatic ecosystems. Acidification is known to produce corrosion in metals, hence increasing their harmful effects on the environment, organisms and human health. The prevalent use of metallic nanoparticles (NPs) in everyday products raises concerns regarding exposure and nanotoxicity even in these acidified conditions. We thus report on the cytotoxic and genotoxic potential of nickel oxide (NiO-NP) and zinc oxide (ZnO-NP) NPs when suspended in aqueous media in light of pH variations (7.5 and 5). A modified microsuspension method of the Salmonella/microsome assay was adopted, and strains (TA97a, TA98, TA100, TA102) were exposed to NPs (10-1280 μg/plate) with and without a metabolization fraction. The acidic condition favored disaggregation and caused a decrease in NPs size. Mutagenicity was observed in all samples and different strains, with greater DNA base pair substitution damage (TA100 and TA102), but extrinsic conditions (pH) suggest different action mechanisms of NiO-NP and ZnO-NP on genetic content. Mutagenic activity was found to increase upon metabolic activation (TA98, TA100, and TA102) demonstrating the bioactivity of NiO-NP and ZnO-NP in relation to metabolites generated by the mammalian p450 system in vitro. Modifications in the Salmonella assay methodology increased cell exposure time. The observed responses recommend this modified assay as one of the methodologies of choice for nanoecotoxicological evaluation. These findings emphasize the significance of incorporating the environmental context when evaluating the toxicity of metal-based NPs.

Sublethal effects induced by different plastic nano-sized particles in Daphnia magna at environmentally relevant concentrations

A growing number of studies have reported the toxic effects of nanoplastics (NPs) on organisms. However, the focus of these studies has almost exclusively been on the use of polystyrene (PS) nanospheres. Herein, we aim to evaluate the sublethal effects on Daphnia magna juveniles of three different NP polymers: PS-NPs with an average size of 200 nm, polyethylene [PE] NPs and polyvinyl chloride [PVC] NPs with a size distribution between 50 and 350 nm and a comparable mean size. For each polymer, five environmentally relevant concentrations were tested (from 2.5 to 250 μg/L) for an exposure time of 48 h. NP effects were assessed at the biochemical level by investigating the amount of reactive oxygen species (ROS) and the activity of the antioxidant enzyme catalase (CAT) and at the behavioral level by evaluating the swimming behavior (distance moved). Our results highlight that exposure to PVC-NPs can have sublethal effects on Daphnia magna at the biochemical and behavioral levels. The potential role of particle size on the measured effects cannot be excluded as PVC and PE showed a wider size range distribution than PS, with particles displaying sizes from 50 to 350 nm. However, we infer that the chemical structure of PVC, which differs from that of PE of the same range size, concurs to explain the observed effects. Consequently, as PS seems not to be the most hazardous polymer, we suggest that the use of data on PS toxicity alone can lead to an underestimation of NP hazards.

Effects of Mixtures of Engineered Nanoparticles and Cocontaminants on Anaerobic Digestion

The widespread application of nanotechnology inevitably leads to an increased release of engineered nanoparticles (ENPs) into the environment. Due to their specific physicochemical properties, ENPs may interact with other contaminants and exert combined effects on the microbial community and metabolism of anaerobic digestion (AD), an important process for organic waste reduction, stabilization, and bioenergy recovery. However, the complicated interactions between ENPs and other contaminants as well as their combined effects on AD are often overlooked. This review therefore focuses on the co-occurrence of ENPs and cocontaminants in the AD process. The key interactions between ENPs and cocontaminants and their combined influences on AD are summarized from the available literature, including the critical mechanisms and influencing factors. Some sulfides, coagulants, and chelating agents have a dramatic "detoxification" effect on the inhibition effect of ENPs on AD. However, some antibiotics and surfactants increase the inhibition of ENPs on AD. The reasons for these differences may be related to the interactive effects between ENPs and cocontaminants, changes of key enzyme activities, adenosine triphosphate (ATP) levels, reactive oxygen species (ROS) production, and microbial communities. New scientific opportunities for a better understanding of the coexistence in real world situations are converging on the scale of nanoparticles.

Steam disinfection enhances bioaccessibility of metallic nanoparticles in nano-enabled silicone-rubber baby bottle teats, pacifiers, and teethers

Nano-enabled silicone-rubber articles for feeding or chewing could be a source of metallic nanoparticles (NPs) directly exposed to infants and young children. However, the impact of steam disinfection on release of NPs and the related potential risks to children's health are unknown. Here, we investigated contents and form of Ag and Zn in 57 nano-enabled silicone-rubber baby bottle teats, pacifiers, and teethers of seven countries and examined the impacts of steam disinfection on in vitro bioaccessibility (IVBA) of Ag and Zn in the articles. Nearly 89% articles had a mixture of Ag- and Zn-containing NPs and the teethers had relatively high Ag and Zn contents (up to 501 and 254 µg/g, respectively). Steam disinfection caused rubber decomposition into micro(nano)plastics (0.54-15.7 µm) and NP release from the interior of bulk rubber and micro-sized plastics, thus enhancing the IVBA of Ag and Zn by up to 5.5 times. The findings provide insights into mechanisms for NP release by steam disinfection. Though oral exposure risk assessment suggested low health concerns on individual metal release, our study points out the need to assess the potential health risks of child co-exposure to metallic NPs and micro(nano)plastics.

Environmental behaviors and toxic mechanisms of engineered nanomaterials in soil

Engineered nanomaterials (ENMs) are inevitably released into the environment with the exponential application of nanotechnology. Parts of ENMs eventually accumulate in the soil environment leading to potential adverse effects on soil ecology, crop production, and human health. Therefore, the safety application of ENMs on soil has been widely discussed in recent years. More detailed safety information and potential soil environmental risks are urgently needed. However, most of the studies on the environmental effects of metal-based ENMs have been limited to single-species experiments, ecosystem processes, or abiotic processes. The present review formulated the source and the behaviors of the ENMs in soil, and the potential effects of single and co-exposure ENMs on soil microorganisms, soil fauna, and plants were introduced. The toxicity mechanism of ENMs to soil organisms was also reviewed including oxidative stress, the release of toxic metal ions, and physical contact. Soil properties affect the transport, transformation, and toxicity of ENMs. Toxic mechanisms of ENMs include oxidative stress, ion release, and physical contact. Joint toxic effects occur through adsorption, photodegradation, and loading. Besides, future research should focus on the toxic effects of ENMs at the food chain levels, the effects of ENMs on plant whole-lifecycle, and the co-exposure and long-term toxicity effects. A fast and accurate toxicity evaluation system and model method are urgently needed to solve the current difficulties. It is of great significance for the sustainable development of ENMs to provide the theoretical basis for the ecological risk assessment and environmental management of ENMs.

Predicting environmental concentrations of nanomaterials for exposure assessment - a review

There have been major advances in the science to predict the likely environmental concentrations of nanomaterials, which is a key component of exposure and subsequent risk assessment. Considerable progress has been since the first Material Flow Analyses (MFAs) in 2008, which were based on very limited information, to more refined current tools that take into account engineered nanoparticle (ENP) size distribution, form, dynamic release, and better-informed release factors. These MFAs provide input for all environmental fate models (EFMs), that generate estimates of particle flows and concentrations in various environmental compartments. While MFA models provide valuable information on the magnitude of ENP release, they do not account for fate processes, such as homo- and heteroaggregation, transformations, dissolution, or corona formation. EFMs account for these processes in differing degrees. EFMs can be divided into multimedia compartment models (e.g., atmosphere, waterbodies and their sediments, soils in various landuses), of which there are currently a handful with varying degrees of complexity and process representation, and spatially-resolved watershed models which focus on the water and sediment compartments. Multimedia models have particular applications for considering predicted environmental concentrations (PECs) in particular regions, or for developing generic "fate factors" (i.e., overall persistence in a given compartment) for life-cycle assessment. Watershed models can track transport and eventual fate of emissions into a flowing river, from multiple sources along the waterway course, providing spatially and temporally resolved PECs. Both types of EFMs can be run with either continuous sources of emissions and environmental conditions, or with dynamic emissions (e.g., temporally varying for example as a new nanomaterial is introduced to the market, or with seasonal applications), to better understand the situations that may lead to peak PECs that are more likely to result in exceedance of a toxicological threshold. In addition, bioaccumulation models have been developed to predict the internal concentrations that may accumulate in exposed organisms, based on the PECs from EFMs. The main challenge for MFA and EFMs is a full validation against observed data. To date there have been no field studies that can provide the kind of dataset(s) needed for a true validation of the PECs. While EFMs have been evaluated against a few observations in a small number of locations, with results that indicate they are in the right order of magnitude, there is a great need for field data. Another major challenge is the input data for the MFAs, which depend on market data to estimate the production of ENPs. The current information has major gaps and large uncertainties. There is also a lack of robust analytical techniques for quantifying ENP properties in complex matrices; machine learning may be able to fill this gap. Nevertheless, there has been major progress in the tools for generating PECs. With the emergence of nano- and microplastics as a leading environmental concern, some EFMs have been adapted to these materials. However, caution is needed, since most nano- and microplastics are not engineered, therefore their characteristics are difficult to generalize, and there are new fate and transport processes to consider.

Multifactorial role of nanoparticles in alleviating environmental stresses for sustainable crop production and protection

In the era of dire environmental fluctuations, plants undergo several stressors during their life span, which severely impact their development and overall growth in negative aspects. Abiotic stress factors, especially moisture stress i.e shortage (drought) or excess (flooding), salinity, temperature divergence (i.e. heat and cold stress), heavy metal toxicity, etc. create osmotic and ionic imbalance inside the plant cells, which ultimately lead to devastating crop yield, sometimes crop failure. Apart from the array of abiotic stresses, various biotic stress caused by pathogens, insects, and nematodes also affect production. Therefore, to combat these major challenges in order to increase production, several novel strategies have been adapted, among which the use of nanoparticles (NPs) i.e. nanotechnology is becoming an emerging tool in various facets of the current agriculture system, nowadays. This present review will elaborately depict the deployment and mechanisms of different NPs to withstand these biotic and abiotic stresses, along with a brief overview and indication of the future research works to be oriented based on the steps provided for future research in advance NPs application through the sustainable way.

A Review of the Aquatic Environmental Transformations of Engineered Nanomaterials

Once released into the environment, engineered nanomaterials (ENMs) undergo complex interactions and transformations that determine their fate, exposure concentration, form, and likely impact on biota. Transformations are physical, chemical, or biological changes that occur to the ENM or the ENM coating. Over time, these transformations have an impact on their behaviour and properties. The interactions and transformations of ENMs in the environment depend on their pristine physical and chemical characteristics and the environmental or biological compartment into which they are released. The uniqueness of each ENM property or lifecycle results in a great deal of complexity. Even small changes may have a significant impact on their potential transformations. This review outlines the key influences and outcomes of ENM evolution pathways in aquatic environments and provides an assessment of potential environmental transformations, focusing on key chemical, physical, and biological processes. By obtaining a comprehensive understanding of the potential environmental transformations that nanomaterials can undergo, more realistic models of their probable environmental behaviour and potential impact can be developed. This will, in turn, be crucial in supporting regulatory bodies in their efforts to develop environmental policy in the field of nanotechnology.

Study of the Stability, Uptake and Transformations of Zero Valent Iron Nanoparticles in a Model Plant by Means of an Optimised Single Particle ICP-MS/MS Method

In the context of the widespread distribution of zero valent iron nanoparticles (nZVI) in the environment and its possible exposure to many aquatic and terrestrial organisms, this study investigates the effects, uptake, bioaccumulation, localisation and possible transformations of nZVI in two different forms (aqueous dispersion-Nanofer 25S and air-stable powder-Nanofer STAR) in a model plant-Arabidopsis thaliana. Seedlings exposed to Nanofer STAR displayed symptoms of toxicity, including chlorosis and reduced growth. At the tissue and cellular level, the exposure to Nanofer STAR induced a strong accumulation of Fe in the root intercellular spaces and in Fe-rich granules in pollen grains. Nanofer STAR did not undergo any transformations during 7 days of incubation, while in Nanofer 25S, three different behaviours were observed: (i) stability, (ii) partial dissolution and (iii) the agglomeration process. The size distributions obtained by SP-ICP-MS/MS demonstrated that regardless of the type of nZVI used, iron was taken up and accumulated in the plant, mainly in the form of intact nanoparticles. The agglomerates created in the growth medium in the case of Nanofer 25S were not taken up by the plant. Taken together, the results indicate that Arabidopsis plants do take up, transport and accumulate nZVI in all parts of the plants, including the seeds, which will provide a better understanding of the behaviour and transformations of nZVI once released into the environment, a critical issue from the point of view of food safety.

Effects of sunlight on the fate of graphene oxide and reduced graphene oxide nanomaterials in the natural surface water

Graphene nanomaterials have been commercialized for use in the electronic and biomedical industries, increasing their dissemination into surface waters and subsequent transformation in natural aquatic environment. While the photodegradation of graphene oxide nanomaterials has been investigated in the past, previous research did not consider actual natural aquatic environment and also focused on primarily graphene oxide nanomaterials. In this study, photodegradation of graphene nanomaterials with varying oxidation levels, including graphene oxide (GO) and partially reduced graphene oxide (rGO-2 h) are evaluated in Columbia River Water and compared with each other. Our results indicate that both direct and indirect photolysis of graphene-based nanomaterials will occur simultaneously in natural surface water. However, environmentally relevant concentrations of photosensitizers in surface water are not capable of producing sufficient ^·OH to initiate degradation of GO via indirect photolysis. For all conditions tested, GO showed more rapid photodegradation compared to rGO. Overall, direct and indirect photodegradation of graphene oxide nanomaterials in natural surface water is minimal and slow indicating that phototransformation of graphene-based nanomaterials will be insignificant in natural surface water.

Chemical-analytical characterization and leaching of heavy metals associated with nanoparticles and microplastics from commercial face masks and the abundance of personal protective equipment (PPE) waste in three metropolitan cities of South America

In this study, we surveyed the presence of personal protective equipment (PPE) waste on the streets of Bogotá-Colombia, Lima-Perú, and Mar del Plata-Argentina. Furthermore, this work is also focused on the release capacity of Ag, Cu, and Zn metals associated with nanoparticles, and microplastics (MPs) from textile face masks (TFMs) and disposable face masks. According to our results, an association between low-income areas and PPE waste was found, which may be related to the periodicity of waste collection and economic activity. Polymers, like polypropylene, cotton-polyester, and additives, such as CaCO₃, MgO, and Ag/Cu as nanoparticles, were identified. TFMs released high levels of Cu (35,900-60,200 μg·L^-1), Zn (2340-2380 μg·L^-1), and MPs (4528-10,640 particles/piece). Metals associated with nanoparticles leached by face masks did not present any antimicrobial activity against P. aeruginosa. Our study suggests that TFMs may leach large amounts of polluting nano/micromaterials in aquatic environments with potential toxicological effects on organisms.

Environmental safety of nanotechnologies: The eco-design of manufactured nanomaterials for environmental remediation

Nanosafety is paramount considering the risks associated with manufactured nanomaterials (MNMs) whose implications could outweigh their advantages for environmental applications. Although nanotechnology-based solutions to implement pollution control, remediation and prevention are incremental with clear benefits for public health and Earth' natural ecosystems, nanoremediation is having a setback due to the risks associated with the safety of MNMs for humans and the environment. MNMs are diverse, work differently and bionano-interactions occurring upon environmental exposure will guide their fate and hazardous outcomes. Here we propose a new ecologically-based design strategy (eco-design) having its roots in green nanoscience and LCA that will ground on an Ecological Risk Assessment approach, which introduces the evaluation of MNMs' ecotoxicity along with their performances and efficacies at the design stage. As such, the proposed eco-design strategy will allow recognition and design-out since the very beginning of material synthesis, those hazardous peculiar features that can be hazardous to living beings and the natural environment. A more ecologically sound eco-design strategy in which nanosafety is conceptually included in MNMs design will sustain safer nanotechnologies including those for the environment as remediation by leveraging any risks for humans and natural ecosystems.

Research Progress in Hemicellulose-Based Nanocomposite Film as Food Packaging

As the main component of agricultural and forestry biomass, hemicellulose has the advantages of having an abundant source, biodegradability, nontoxicity and good biocompatibility. Its application in food packaging has thus become the focus of efficient utilization of biomass resources. However, due to its special molecular structure and physical and chemical characteristics, the mechanical properties and barrier properties of hemicellulose films are not sufficient, and modification for performance enhancement is still a challenge. In the field of food packaging materials preparation, modification of hemicellulose through blending with nanofibers or nanoparticles, both inorganic and organic, has attracted research attention because this approach offers the advantages of efficient improvement in the expected properties and better cost efficiency. In this paper, the composition of hemicellulose, the classification of nanofillers and the research status of hemicellulose-based nanocomposite films are reviewed. The research progress in modification of hemicellulose by using layered silicate, inorganic nanoparticles and organic nanoparticles in food packaging is described. Challenges and outlook of research in hemicellulose-based nanocomposite film in food packaging is discussed.

Real-Time Underwater Nanoplastic Detection beyond the Diffusion Limit and Low Raman Scattering Cross-Section via Electro-Photonic Tweezers

Emerging as substantial concerns in the ecosystem, submicron plastics have attracted much attention for their considerable hazards. However, their effect and even amount in the environment remain unclear. Establishing a substantive analytic platform is essential to expand the understanding of nanoplastics. However, the issues of diffusion and detection limit that arise from ultradiluted concentration and extremely small scales of nanoplastics leave significant technical hurdles to analyze the nanoplastic pollutants. In this study, we obtain effective Raman signals in real time from underwater nanoplastics with ultralow concentrations via AC electro-osmotic flows and dielectrophoretic tweezing. This enables the field-induced active collection of nanoplastics toward the optical sensing area from remote areas in a rapid manner, integrating conventional technical skills of preconcentration, separation, and identification in a single process. A step further, synergetic combination with plasmonic nanorods, accomplishes the highest on-site detection performance so far.

Waste to catalyst: Role of agricultural waste in water and wastewater treatment

Presently, owing to the rapid development of industrialization and urbanization activities, a huge quantity of wastewater is generated that contain toxic chemical and heavy metals, imposing higher environmental jeopardies and affecting the life of living well-being and the economy of the counties, if not treated appropriately. Subsequently, the advancement in sustainable cost-effective wastewater treatment technology has attracted more attention from policymakers, legislators, and scientific communities. Therefore, the current review intends to highlight the recent development and applications of biochars and/or green nanoparticles (NPs) produced from agricultural waste via green routes in removing the refractory pollutants from water and wastewater. This review also highlights the contemporary application and mechanism of biochar-supported advanced oxidation processes (AOPs) for the removal of organic pollutants in water and wastewater. Although, the fabrication and application of agriculture waste-derived biochar and NPs are considered a greener approach, nevertheless, before scaling up production and application, its toxicological and life-cycle challenges must be taken into account. Furthermore, future efforts should be carried out towards process engineering to enhance the performance of green catalysts to improve the economy of the process.

Nanomaterials biotransformation: In planta mechanisms of action

Research on engineered nanomaterials (ENMs) exposure has continued to expand rapidly, with a focus on uncovering the underlying mechanisms. The EU largely limits the number and the type of organisms that can be used for experimental testing through the 3R normative. There are different routes through which ENMs can enter the soil-plant system: this includes the agricultural application of sewage sludges, and the distribution of nano-enabled agrochemicals. However, a thorough understanding of the physiological and molecular implications of ENMs dispersion and chronic low-dose exposure remains elusive, thus requiring new evidence and a more mechanistic overview of pathways and major effectors involved in plants. Plants can offer a reliable alternative to conventional model systems to elucidate the concept of ENM biotransformation within tissues and organs, as a crucial step in understanding the mechanisms of ENM-organism interaction. To facilitate the understanding of the physico-chemical forms involved in plant response, synchrotron-based techniques have added new potential perspectives in studying the interactions between ENMs and biota. These techniques are providing new insights on the interactions between ENMs and biomolecules. The present review discusses the principal outcomes for ENMs after intake by plants, including possible routes of biotransformation which make their final fate less uncertain, and therefore require further investigation.

Daphnia as a model organism to probe biological responses to nanomaterials-from individual to population effects via adverse outcome pathways

The importance of the cladoceran Daphnia as a model organism for ecotoxicity testing has been well-established since the 1980s. Daphnia have been increasingly used in standardised testing of chemicals as they are well characterised and show sensitivity to pollutants, making them an essential indicator species for environmental stress. The mapping of the genomes of D. pulex in 2012 and D. magna in 2017 further consolidated their utility for ecotoxicity testing, including demonstrating the responsiveness of the Daphnia genome to environmental stressors. The short lifecycle and parthenogenetic reproduction make Daphnia useful for assessment of developmental toxicity and adaption to stress. The emergence of nanomaterials (NMs) and their safety assessment has introduced some challenges to the use of standard toxicity tests which were developed for soluble chemicals. NMs have enormous reactive surface areas resulting in dynamic interactions with dissolved organic carbon, proteins and other biomolecules in their surroundings leading to a myriad of physical, chemical, biological, and macromolecular transformations of the NMs and thus changes in their bioavailability to, and impacts on, daphnids. However, NM safety assessments are also driving innovations in our approaches to toxicity testing, for both chemicals and other emerging contaminants such as microplastics (MPs). These advances include establishing more realistic environmental exposures via medium composition tuning including pre-conditioning by the organisms to provide relevant biomolecules as background, development of microfluidics approaches to mimic environmental flow conditions typical in streams, utilisation of field daphnids cultured in the lab to assess adaption and impacts of pre-exposure to pollution gradients, and of course development of mechanistic insights to connect the first encounter with NMs or MPs to an adverse outcome, via the key events in an adverse outcome pathway. Insights into these developments are presented below to inspire further advances and utilisation of these important organisms as part of an overall environmental risk assessment of NMs and MPs impacts, including in mixture exposure scenarios.

Surface Functionalization of Polyester Textiles for Antibacterial and Antioxidant Properties

One of the recommendations for future textile development is the modification of textiles to produce materials for human performance (sports, medical, and protective). In the current work, modifying a polyester surface with silver nanoparticles improved antioxidant and antibacterial protection. For this purpose, ethylenediamine aminolysis was utilized as ligands to fabricate polyester textiles, trapping silver ions to further reduce silver nanoparticles (AgNPs). Dopamine (PDA) was used to provide antibacterial and antioxidant properties to the polyester textile by converting silver ions into AgNPs through its phenolic hydroxyl groups. Pristine polyester, polyester treated with ethylenediamine, and PDA-coated AgNP-loaded polyester ethylenediamine were characterized using SEM, EDX, FTIR, TGA, and tensile strength. The antibacterial properties against Staphylococcus aureus and Escherichia coli were examined through the broth test. PDA-AgNPs composite nanocoating exhibited improved tensile strength and antibacterial and antioxidant properties, demonstrating that polyester with a PDA-AgNPs overlay may be used for long-term biomedical textiles.

Nanotechnology in agriculture: Comparison of the toxicity between conventional and nano-based agrochemicals on non-target aquatic species

Increased crop production is necessary to keep up with rising food demand. However, conventional agricultural practices and agrochemicals are unable to sustain further increases without serious risk of adverse environmental consequences. The implementation of nanotechnology in agriculture practices has been increasing in recent years and has shown tremendous potential to boost crop production. The rapid growth in development and use of nano-agrochemicals in agriculture will inevitably result in more chemicals reaching water bodies. Some unique properties of nanoformulations may also alter the toxicity of the AI on aquatic organisms when compared to their conventional counterparts. Results from studies on conventional formulations may not properly represent the toxicity of new nanoformulations in the aquatic environment. As a result, current guidelines derived from conventional formulations may not be suitable to regulate those newly developed nanoformulations. Current knowledge on the toxicity of nano-agrochemicals on aquatic organisms is limited, especially in an ecologically relevant setting. This review complies and analyzes 18 primary studies based on 7 criteria to provide a comprehensive analysis of the available toxicity information of nano-agrochemicals and their conventional counterparts on aquatic organisms. Our analysis demonstrates that the overall toxicity of nano-agrochemicals on non-target aquatic species is significantly lower as compared to conventional counterparts. However, further dividing formulations into three categories (organic, bulk and ionic) shows that some nanoformulations can be more toxic when compared to bulk materials but less toxic as compared to ionic formulations while organic nanopesticides do not show a general trend in overall toxicity. Moreover, our analysis reveals the limitations of current studies and provides recommendations for future toxicity studies to ensure the effective and sustainable application of nano-agrochemicals, which will be beneficial to both the agrochemical industry and regulatory agencies alike.

Prospective Dynamic and Probabilistic Material Flow Analysis of Graphene-Based Materials in Europe from 2004 to 2030

As industrial demand for graphene-based materials (GBMs) grows, more attention falls on potential environmental risks. The present article describes a first assessment of the environmental releases of GBMs using dynamic probabilistic material flow analysis. The model considered all current or expected uses of GBMs from 2004 to 2030, during which time there have already been significant changes in how the graphene mass produced is distributed to different product categories. Although the volume of GBM production is expected to grow exponentially in the coming years, outflow from the consumption of products containing GBMs shows only a slightly positive trend due to their long lifetimes and the large in-use stock of some applications (e.g., GBM composites used in wind turbine blades). From consumption and end-of-life phase GBM mass flows in 2030, estimates suggest that more than 50% will be incinerated and oxidized in waste plants, 16% will be landfilled, 12% will be exported out of Europe, and 1.4% of the annual production will flow to the environment. Predicted release concentrations for 2030 are 1.4 ng/L in surface water and 20 μg/kg in sludge-treated soil. This study's results could be used for prospective environmental risk assessments and as input for environmental fate models.

In Situ Coating of Polydopamine-AgNPs on Polyester Fabrics Producing Antibacterial and Antioxidant Properties

Nanoparticles are increasingly utilized as coating materials to improve the properties of polyester textiles. In this work, polyester textiles were successfully fabricated, with hydrazide groups serving as ligands for the entrapment of sliver ions and subsequent reduction to AgNPs. Polydopamine (PDA) was used in this work to impart antibacterial and antioxidant properties to the polyester textiles through its phenolic hydroxyl groups, which can convert silver ions into AgNPs. Moreover, glucose was used as a reducing agent to create AgNPs-loaded polyester hydrazide. ATR-FTIR, SEM, EDX, thermogravimetric analysis (TGA), and tensile strength were used to characterize the pristine polyester, the polyester hydrazide, the PDA-coated AgNP-loaded polyester hydrazide and the AgNP-loaded polyester hydrazide. A broth test was also used to investigate the textile's antimicrobial activities against Escherichia coli and Staphylococcus aureus. Overall, the composite nanocoating with PDA-AgNPs demonstrated good tensile strength and antioxidant and antibacterial characteristics, implying the practicality of PDA-AgNPs coating polyester for biomedical textile applications.

Nanomaterial Ecotoxicology in the Terrestrial and Aquatic Environment: A Systematic Review

This systematic review analyzes the studies available on the ecotoxicity of nanomaterials (NMs) in the environment to understand where future research should be addressed for achieving Agenda 2030 goals on sustainable development and environmental safety. We discuss the status of NMs ecotoxicological effects across different organisms that are representative of all natural environments (land, air, water). A total of 1562 publications were retrieved from the Web of Science (all databases) by using the search criteria “nanomaterials” and “ecotoxicology”; among them, 303 studies were included in the systematic review because they met any of the following criteria: (i) focalize on both search criteria; (ii) deal with terrestrial, or aquatic environment; (iii) address models (organisms, cells) for the nano environmental risk assessment and exposure. The knowledge gaps are identified together with novel insights that need to be further investigated to better understand the ecotoxicological environmental impacts of NMs.

A review on the generation, discharge, distribution, environmental behavior, and toxicity (especially to microbial aggregates) of nano-TiO2 in sewage and surface-water and related research prospects

This article reviews the nano-effects and applications of different crystalline nano‑titanium dioxide (nano-TiO₂), identifies their discharge, distribution, behavior, and toxicity to aquatic organisms (focusing on microbial aggregates) in sewage and surface-water, summarizes related toxicity mechanisms, and critically proposes future perspectives. The results show that: 1) based on crystal type, application boundaries of nano-TiO₂ have become clear, extending from traditional manufacturing to high-tech fields; 2) concentration of nano-TiO₂ in water is as high as hundreds of thousands of μg/L (sewage) or several to dozens of μg/L (surface-water) due to direct application or indirect release; 3) water environmental behaviors of nano-TiO₂ are mainly controlled by hydration conditions and particle characteristics; 4) aquatic toxicities of nano-TiO₂ are closely related to their water environmental behavior, in which crystal type and tested species (such as single species and microbial aggregates) also play the key role. Going forward, the exploration of the toxicity mechanism will surely become a hot topic in the aquatic-toxicology of nano-TiO₂, because most of the research so far has focused on the responses of biological indicators (such as metabolism and damage), while little is known about the stress imprint caused by the crystal structures of nano-TiO₂ in water environments. Additionally, the aging of nano-TiO₂ in a water environment should be heeded to because the continuously changing surface structure is bound to have a significant impact on its behavior and toxicity. Moreover, for microbial aggregates, comprehensive response analysis should be conducted in terms of the functional activity, surface features, composition structure, internal microenvironment, cellular and molecular level changes, etc., to find the key point of the interaction between nano-TiO₂ and microbial aggregates, and to take mitigation or beneficial measures to deal with the aquatic-toxicity of nano-TiO₂. In short, this article contributes by 1) reviewing the research status of nano-TiO₂ in all aspects: application and discharge, distribution and behavior, and its aquatic toxicity; 2) suggesting the response mechanism of microbial aggregates and putting forward the toxigenic mechanism of nanomaterial structure; 3) pointing out the future research direction of nano-TiO₂ in water environment.

Nanosafety: An Evolving Concept to Bring the Safest Possible Nanomaterials to Society and Environment

The use of nanomaterials has been increasing in recent times, and they are widely used in industries such as cosmetics, drugs, food, water treatment, and agriculture. The rapid development of new nanomaterials demands a set of approaches to evaluate the potential toxicity and risks related to them. In this regard, nanosafety has been using and adapting already existing methods (toxicological approach), but the unique characteristics of nanomaterials demand new approaches (nanotoxicology) to fully understand the potential toxicity, immunotoxicity, and (epi)genotoxicity. In addition, new technologies, such as organs-on-chips and sophisticated sensors, are under development and/or adaptation. All the information generated is used to develop new in silico approaches trying to predict the potential effects of newly developed materials. The overall evaluation of nanomaterials from their production to their final disposal chain is completed using the life cycle assessment (LCA), which is becoming an important element of nanosafety considering sustainability and environmental impact. In this review, we give an overview of all these elements of nanosafety.

Building the Bridge From Aquatic Nanotoxicology to Safety by Design Silver Nanoparticles

Nanotechnologies have rapidly grown, and they are considered the new industrial revolution. However, the augmented production and wide applications of engineered nanomaterials (ENMs) and nanoparticles (NPs) inevitably lead to environmental exposure with consequences on human and environmental health. Engineered nanomaterial and nanoparticle (ENM/P) effects on humans and the environment are complex and largely depend on the interplay between their peculiar properties such as size, shape, coating, surface charge, and degree of agglomeration or aggregation and those of the receiving media/body. These rebounds on ENM/P safety and newly developed concepts such as the safety by design are gaining importance in the field of sustainable nanotechnologies. This article aims to review the critical characteristics of the ENM/Ps that need to be addressed in the safe by design process to develop ENM/Ps with the ablility to reduce/minimize any potential toxicological risks for living beings associated with their exposure. Specifically, we focused on silver nanoparticles (AgNPs) due to an increasing number of nanoproducts containing AgNPs, as well as an increasing knowledge about these nanomaterials (NMs) and their effects. We review the ecotoxicological effects documented on freshwater and marine species that demonstrate the importance of the relationship between the ENM/P design and their biological outcomes in terms of environmental safety.

Titanium dioxide particles frequently present in face masks intended for general use require regulatory control

Although titanium dioxide (TiO₂) is a suspected human carcinogen when inhaled, fiber-grade TiO₂ (nano)particles were demonstrated in synthetic textile fibers of face masks intended for the general public. STEM-EDX analysis on sections of a variety of single use and reusable face masks visualized agglomerated near-spherical TiO₂ particles in non-woven fabrics, polyester, polyamide and bi-component fibers. Median sizes of constituent particles ranged from 89 to 184 nm, implying an important fraction of nano-sized particles (< 100 nm). The total TiO₂ mass determined by ICP-OES ranged from 791 to 152,345 µg per mask. The estimated TiO₂ mass at the fiber surface ranged from 17 to 4394 µg, and systematically exceeded the acceptable exposure level to TiO₂ by inhalation (3.6 µg), determined based on a scenario where face masks are worn intensively. No assumptions were made about the likelihood of the release of TiO₂ particles itself, since direct measurement of release and inhalation uptake when face masks are worn could not be assessed. The importance of wearing face masks against COVID-19 is unquestionable. Even so, these results urge for in depth research of (nano)technology applications in textiles to avoid possible future consequences caused by a poorly regulated use and to implement regulatory standards phasing out or limiting the amount of TiO₂ particles, following the safe-by-design principle.

Effects of natural organic matter on the joint toxicity and accumulation of Cu nanoparticles and ZnO nanoparticles in Daphnia magna

Various modern products have metallic nanoparticles (MNPs) embedded to enhance products performance. Technological advances enable nowadays even multiple hybrid nanoparticles. Consequently, the future co-release of multiple MNPs will inevitably result in the presence of MNP mixtures in the environment. An important question is if the responses of mixtures of MNPs can be dealt with in a similar way as with the responses of biota to mixtures of metal salts. Moreover, natural organic matter (NOM) is an important parameter affecting the behavior and effect of MNPs. Herein, we determined the joint toxicity and accumulation of copper nanoparticles (CuNPs) and zinc oxide nanoparticles (ZnONPs) in Daphnia magna in the absence and presence of Suwannee River natural organic matter (SR-NOM), compared to the joint toxicity and accumulation of corresponding metal salts. The results of toxicity testing showed that the joint toxicity of CuNPs + ZnONPs was greater than the single toxicity of CuNPs or ZnONPs. The joint toxic action of CuNPs + ZnONPs was additive or more-than-additive for D. magna. A similar pattern was found in the toxicity of the mixtures of Cu- and Zn-salts from the literature data. The presence of SR-NOM had no significant impact on the joint toxicity of CuNPs + ZnONPs. The calculated component-specific contribution to overall toxicity indicated that SR-NOM increased the relative contribution of dissolved ions released from the MNPs to the toxicity of the binary mixtures at high-effect concentrations of individual MNPs. Moreover, dissolved Zn-ions released from the ZnONPs were found to dominate the joint toxicity of CuNPs + ZnONPs in the presence of SR-NOM. Furthermore, the results of the accumulation experiment displayed that the presence of SR-NOM significantly enhanced the accumulation of either CuNPs or ZnONPs in D. magna exposed to the MNP mixtures.

Development and validation of a method for the weathering and detachment of representative nanomaterials from conventional silver-containing textiles

Nanotoxicology research commonly utilizes pristine nanomaterials for toxicity assessment, which may not be perfectly representative of what is released into environmental systems. The goal of the present study was to develop a method to simulate human weathering of silver-containing textiles. To achieve this goal the roles of physical and chemical stress on X-Static® containing athletic textiles were investigated and compared to data collected from human weathering experiments and literature. Chemical weathering methods (artificial sweat) were used independently and alongside physical weathering methods (3D printed stretching and abrasion instruments). Non-weathered control textiles were found to release 29 ± 11 mg Ag/kg of textile into wash water effluent (ICP-MS), with 16% being released as ionic silver (ICP-MS) and the rest as metallic nanomaterials, nanosheets, and particulates of varying size (SEM/XANES). Real and simulated human weathered textiles released similar amounts of total silver (67 ± 11 mg Ag/kg, 84 ± 13 mg Ag/kg respectively) with the silver released being composed of ionic (1.5%, 2%) and a mixture of metallic and chlorinated nanomaterials, nanosheets, and particulates. The method was shown to effectively detach environmentally representative silver materials from silver-containing textiles and can provide such materials for future studies on the assessment of their fate, transport, and toxicity.

Aquatic Toxicity Effects and Risk Assessment of 'Form Specific' Product-Released Engineered Nanomaterials

The study investigated the toxicity effects of 'form specific' engineered nanomaterials (ENMs) and ions released from nano-enabled products (NEPs), namely sunscreens, sanitisers, body creams and socks on Pseudokirchneriella subcapitata, Spirodela polyrhiza, and Daphnia magna. Additionally, risk estimation emanating from the exposures was undertaken. The ENMs and the ions released from the products both contributed to the effects to varying extents, with neither being a uniform principal toxicity agent across the exposures; however, the effects were either synergistic or antagonistic. D. magna and S. polyrhiza were the most sensitive and least sensitive test organisms, respectively. The most toxic effects were from ENMs and ions released from sanitisers and sunscreens, whereas body creams and sock counterparts caused negligible effects. The internalisation of the ENMs from the sunscreens could not be established; only adsorption on the biota was evident. It was established that ENMs and ions released from products pose no imminent risk to ecosystems; instead, small to significant adverse effects are expected in the worst-case exposure scenario. The study demonstrates that while ENMs from products may not be considered to pose an imminent risk, increasing nanotechnology commercialization may increase their environmental exposure and risk potential; therefore, priority exposure cases need to be examined.

Boron Nitride Nanosheets Can Induce Water Channels Across Lipid Bilayers Leading to Lysosomal Permeabilization

While the interaction between 2D materials and cells is of key importance to the development of nanomedicines and safe applications of nanotechnology, still little is known about the biological interactions of many emerging 2D materials. Here, an investigation of how hexagonal boron nitride (hBN) interacts with the cell membrane is carried out by combining molecular dynamics (MD), liquid-phase exfoliation, and in vitro imaging methods. MD simulations reveal that a sharp hBN wedge can penetrate a lipid bilayer and form a cross-membrane water channel along its exposed polar edges, while a round hBN sheet does not exhibit this behavior. It is hypothesized that such water channels can facilitate cross-membrane transport, with important consequences including lysosomal membrane permeabilization, an emerging mechanism of cellular toxicity that involves the release of cathepsin B and generation of radical oxygen species leading to cell apoptosis. To test this hypothesis, two types of hBN nanosheets, one with a rhomboidal, cornered morphology and one with a round morphology, are prepared, and human lung epithelial cells are exposed to both materials. The cornered hBN with lateral polar edges results in a dose-dependent cytotoxic effect, whereas round hBN does not cause significant toxicity, thus confirming our premise.

Aquatic Environment Exposure and Toxicity of Engineered Nanomaterials Released from Nano-Enabled Products: Current Status and Data Needs

Rapid commercialisation of nano-enabled products (NEPs) elevates the potential environmental release of engineered nanomaterials (ENMs) along the product life cycle. The current review examined the state of the art literature on aquatic environment exposure and ecotoxicity of product released (PR) engineered nanomaterials (PR-ENMs). Additionally, the data obtained were applied to estimate the risk posed by PR-ENMs to various trophic levels of aquatic biota as a means of identifying priority NEPs cases that may require attention with regards to examining environmental implications. Overall, the PR-ENMs are predominantly associated with the matrix of the respective NEPs, a factor that often hinders proper isolation of nano-driven toxicity effects. Nevertheless, some studies have attributed the toxicity basis of observed adverse effects to a combination of the released ions, ENMs and other components of NEPs. Notwithstanding the limitation of current ecotoxicology data limitations, the risk estimated herein points to an elevated risk towards fish arising from fabrics' PR-nAg, and the considerable potential effects from sunscreens' PR-nZnO and PR-nTiO2 to algae, echinoderms, and crustaceans (PR-nZnO), whereas PR-nTiO2 poses no significant risk to echinoderms. Considering that the current data limitations will not be overcome immediately, we recommend the careful application of similar risk estimation to isolate/prioritise cases of NEPs for detailed characterisation of ENMs' release and effects in aquatic environments.

Metal leaching from antimicrobial cloth face masks intended to slow the spread of COVID-19

Global health organizations recommend the use of cloth face coverings to slow the spread of COVID-19. Seemingly overnight, companies whose primary business is in no way related to healthcare or personal protective equipment-from mattresses manufacturers to big box stores-transitioned into the "mask business." Many companies advertise antimicrobial masks containing silver, copper, or other antimicrobials. Often, the techniques used to load such antimicrobials onto mask fibers are undisclosed, and the potential for metal leaching from these masks is yet unknown. We exposed nine so-called "antimicrobial" face masks (and one 100% cotton control mask) to deionized water, laundry detergent, and artificial saliva to quantify the leachable silver and copper that may occur during mask washing and wearing. Leaching varied widely across manufacturer, metal, and leaching solution, but in some cases was as high as 100% of the metals contained in the as-received mask after 1 h of exposure.

Assessment of Nanopollution from Commercial Products in Water Environments

The use of nano-enabled products (NEPs) can release engineered nanomaterials (ENMs) into water resources, and the increasing commercialisation of NEPs raises the environmental exposure potential. The current study investigated the release of ENMs and their characteristics from six commercial products (sunscreens, body creams, sanitiser, and socks) containing nTiO2, nAg, and nZnO. ENMs were released in aqueous media from all investigated NEPs and were associated with ions (Ag+ and Zn2+) and coating agents (Si and Al). NEPs generally released elongated (7-9 × 66-70 nm) and angular (21-80 × 25-79 nm) nTiO2, near-spherical (12-49 nm) and angular nAg (21-76 × 29-77 nm), and angular nZnO (32-36 × 32-40 nm). NEPs released varying ENMs' total concentrations (ca 0.4-95%) of total Ti, Ag, Ag+, Zn, and Zn2+ relative to the initial amount of ENMs added in NEPs, influenced by the nature of the product and recipient water quality. The findings confirmed the use of the examined NEPs as sources of nanopollution in water resources, and the physicochemical properties of the nanopollutants were determined. Exposure assessment data from real-life sources are highly valuable for enriching the robust environmental risk assessment of nanotechnology.

Form-Specific and Probabilistic Environmental Risk Assessment of 3 Engineered Nanomaterials (Nano-Ag, Nano-TiO2 , and Nano-ZnO) in European Freshwaters

The release of engineered nanomaterials (ENMs) to the environment necessitates an assessment of their environmental risks. The currently available environmental risk assessments (ERA) for ENMs are based on an analysis of the total flows of a specific ENM to the environment and on ecotoxicity studies performed with pristine ENMs. It is known that ENMs undergo transformation during product use and release and in technical systems such as wastewater treatment. The aim of the present study was therefore to perform an ERA of 3 ENMs (nano-Ag, nano-TiO2 , and nano-ZnO) based on a form-specific release model and a form-specific analysis of ecotoxicological data. Predicted environmental concentration values were derived using a form-specific material flow model. Species sensitivity distributions were used to derive predicted-no-effect concentrations (PNECs) for the pristine ENMs and for dissolved and transformed Ag and ZnO. For all ENMs, the matrix-embedded form was included in the assessment. A probabilistic assessment was applied, yielding final probability distributions for the risk characterization ratio (RCR). For nano-Ag, the form-specific assessment resulted in a decrease of the mean RCR from 0.061 for the approach neglecting the different release forms to 0.034 because of the much lower PNEC of transformed Ag. Likewise, for nano-ZnO, the form-specific approach reduced the mean RCR from 1.2 to 0.86. For nano-TiO2 , the form-specific assessment did not change the mean RCR of 0.026. This analysis shows that a form-specific approach can have an influence on the assessment of the environmental risks of ENMs and that, given the availability of form-specific release models, an updated ERA for ENMs can be performed. Environ Toxicol Chem 2021;40:2629-2639. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

The Role of Apoptosis Pathway in the Cytotoxicity Induced by Fresh and Aged Zinc Oxide Nanoparticles

Zinc oxide nanoparticles (ZnO NPs) are used in a wide range of applications including industry, commercial products and medicine field. Numerous mechanistic studies for ZnO NPs' toxicity were performed on pristine (fresh) NPs. However, the cytotoxicity induced by the transformed (aged) ZnO NPs and the underlying mechanisms remain unclear. Here, we observed the physicochemical transformation of ZnO NPs underwent over time, followed by evaluating the cytotoxicity of fresh and aged NPs. We found that fresh ZnO NPs induced higher apoptosis level than their aged counterparts. Accordingly, RNA sequencing data from aged ZnO NP-treated human-hamster hybrid (A_L) cells showed that p53, PI3k-Akt, FoXO, Glutathione, ErbB, HIF-1, Oxytocin and Jak-STAT signaling pathways were enriched but no apoptosis pathway. Quantitative PCR results revealed the significantly higher mRNA level of IL1B and CD69 in fresh NP-treated groups compared to that of aged ZnO NP- and zinc chloride-treated groups. The above results indicated that the lower cytotoxicity of aged ZnO NPs is partially attributed to their reduced potency in inducing apoptosis. The transcriptional regulation of multiple signal pathways activated by aged NPs may help to build the cellular homeostasis. Taken together, our findings highlight the influence of aging (environmental transformation) process of ZnO NPs on their toxicities and biological consequences.

Eco-Interactions of Engineered Nanomaterials in the Marine Environment: Towards an Eco-Design Framework

Marine nano-ecotoxicology has emerged with the purpose to assess the environmental risks associated with engineered nanomaterials (ENMs) among contaminants of emerging concerns entering the marine environment. ENMs’ massive production and integration in everyday life applications, associated with their peculiar physical chemical features, including high biological reactivity, have imposed a pressing need to shed light on risk for humans and the environment. Environmental safety assessment, known as ecosafety, has thus become mandatory with the perspective to develop a more holistic exposure scenario and understand biological effects. Here, we review the current knowledge on behavior and impact of ENMs which end up in the marine environment. A focus on titanium dioxide (n-TiO₂) and silver nanoparticles (AgNPs), among metal-based ENMs massively used in commercial products, and polymeric NPs as polystyrene (PS), largely adopted as proxy for nanoplastics, is made. ENMs eco-interactions with chemical molecules including (bio)natural ones and anthropogenic pollutants, forming eco- and bio-coronas and link with their uptake and toxicity in marine organisms are discussed. An ecologically based design strategy (eco-design) is proposed to support the development of new ENMs, including those for environmental applications (e.g., nanoremediation), by balancing their effectiveness with no associated risk for marine organisms and humans.

Biogenic zinc-oxide nanoparticles of Moringa oleifera leaves abrogates rotenone induced neuroendocrine toxicity by regulation of oxidative stress and acetylcholinesterase activity

Zinc oxide nanoparticles (ZnONPs) from plant origin were postulated to regulate complex hormonal control through the hypothalamus- pituitary-testicular axis and somatic cells due to their unique small size and effective drug delivery to target tissues. This study therefore investigates the biogenic synthesis of zinc oxide nanoparticles (ZnO NPs) from Moringa oleifera leaves on key endocrine hormones (LH, FSH and testosterone), MDA level, antioxidant enzymes (SOD and CAT), acetylcholineesterase (AChE) activity and reactive nitrogen species (NO•) level in rotenone induced male rat. The animals were divided into six groups (n = 8). Group I was orally given olive oil as vehicle; Group II received 60 mg/kg of rotenone (RTNE) only; Group III (RTNE + ZnONPs) received 60 mg/kg RTNE + 10 mg/kg ZnONPs; Group IV (RTNE + ZnCAP) received 60 mg/kg RTNE + 50 mg/kg zinc capsule; Group V (ZnONPs only) received 10 mg/kg ZnONPs only. Group VI received 50 mg/kg ZnCAP only. The experiment lasted 10 days. TEM and XRD images revealed ZnO NPs. Moreover, the presence of organic molecules in bio-reduction reactions from the FTIR spectrum showed the stabilization of the nanoparticles. Also, animals induced with rotenone exhibited impairment in the leydig cells by depleting LH, FSH, and testosterone levels with reduced AChE activity and significant (p < 0.05) alteration in cerebral enzymatic antioxidants. There was also brain increase in NO• production: marker of pro-inflammation. Nanotherapeutically, ZnONPs regulated hypothalamus-pituitary-testicular axis via modulation of cerebral NO•, FSH, LH, testosterone and AChE activity with induction of anti-oxidative enzymes.

Variation in dissolution behavior among different nanoforms and its implication for grouping approaches in inhalation toxicity

Different nanoforms (NF) of the same substance each need to be registered under REACH, but similarities in physiological interaction -among them biodissolution- can justify read-across within a group of NFs, thereby reducing the need to perform animal studies. Here we focused on the endpoint of inhalation toxicity and explored how differences in physical parameters of 17 NFs of silica, and organic and inorganic pigments impact dissolution rates, half-times, and transformation under both pH 7.4 lung lining conditions and pH 4.5 lysosomal conditions. We benchmarked our observations against well-known TiO₂, BaSO₄ and ZnO nanomaterials, representing very slow, partial and quick dissolution respectively. By automated image evaluation, structural transformations were observed for dissolution rates in the order of 0.1 to 10 ng/cm²/h, but did not provide additional decision criteria on the similarity of NFs. Dissolution half-times spanned nearly five orders of magnitude, mostly dictated by the substance and simulant fluid, but modulated up to ten-fold by the subtle differences between NFs. Physiological time scales and benchmark materials help to frame the biologically relevant range, proposed as 1 h to 1 y. NFs of ZnO, Ag, SiO₂, BaSO₄ were in this range. We proposed numerical rules of pairwise similarity within a group, of which the worst case NF would be further assessed by in vivo inhalation studies. These rules divided the colloidal silica NFs into two separate candidate groups, one with Al-doping, one without. Shape or silane surface treatment were less important. The dissolution halftimes of many organic and inorganic pigment NFs were longer than the biologically relevant range, such that dissolution behavior is not an obstacle for their groupings.

Soil-aged nano titanium dioxide effects on full-grown carrot: Dose and surface-coating dependent improvements on growth and nutrient quality

Rutile titanium dioxide nanoparticles (nTiO₂) were weathered in field soil at 0, 100, 200, and 400 mg Ti/kg soil for four months. Two types of nTiO₂ with different surface coatings (hydrophilic and hydrophobic), uncoated nTiO₂ (pristine), and the untreated control were included. Thereafter, carrot seeds (Daucus carota L.) were sown in those soils and grown in a growth chamber for 115 days until full maturity. A comparison was made between this and our previous unaged study, where carrots were treated in the same way in soil with freshly amended nTiO₂. The responses of plants depended on the nTiO₂ surface coating and concentration. The aged hydrophobic and hydrophilic-coated nTiO₂ induced more positive effects on plant development at 400 and 100 mg Ti/kg soil, respectively, compared with control and pristine treatments. Taproot and leaf fresh biomass and plant height were improved by up to 64%, 40%, and 40% compared with control, respectively. Meanwhile, nutrient elements such as Fe in leaves, Mg in taproots, and Ca, Zn, and K in roots were enhanced by up to 66%, 64%, 41, 143% and 46%, respectively. However, the contents of sugar, starch, and some other metal elements in taproots were negatively affected, which may compromise their nutritional quality. Taken together, the overall growth of carrots was benefited by the aged nTiO₂ depending on coating and concentration. The aging process served as a potential sustainable strategy to alleviate the phytotoxicity of unweathered nanoparticles.

In silico nanosafety assessment tools and their ecosystem-level integration prospect

Engineered nanomaterials (ENMs) have tremendous potential in many fields, but their applications and commercialization are difficult to widely implement due to their safety concerns. Recently, in silico nanosafety assessment has become an important and necessary tool to realize the safer-by-design strategy of ENMs and at the same time to reduce animal tests and exposure experiments. Here, in silico nanosafety assessment tools are classified into three categories according to their methodologies and objectives, including (i) data-driven prediction for acute toxicity, (ii) fate modeling for environmental pollution, and (iii) nano-biological interaction modeling for long-term biological effects. Released ENMs may cross environmental boundaries and undergo a variety of transformations in biological and environmental media. Therefore, the potential impacts of ENMs must be assessed from a multimedia perspective and with integrated approaches considering environmental and biological effects. Ecosystems with biodiversity and an abiotic environment may be used as an excellent integration platform to assess the community- and ecosystem-level nanosafety. In this review, the advances and challenges of in silico nanosafety assessment tools are carefully discussed. Furthermore, their integration at the ecosystem level may provide more comprehensive and reliable nanosafety assessment by establishing a site-specific interactive system among ENMs, abiotic environment, and biological communities.

Placing nanoplastics in the context of global plastic pollution

Numerous studies have made the ubiquitous presence of plastic in the environment undeniable, and thus it no longer comes as a surprise when scientists measure the accumulation of macroplastic litter and microplastic fragments in both urban and remote sites. Nanoplastics have recently emerged in the discussions of scientists, regulators and the public, as the weathering of macroplastics may lead to a substantial burden of nanoplastics in various ecosystems. While nanoplastics particles themselves have not (yet) been extensively measured in the environment, there is increased concern that this size fraction of plastic may be more extensively distributed and hazardous that larger-sized particles. This assessment may emanate from an unease with the term 'nano', which may elicit a negative response over uncertainties of the pervasiveness of nanoplastics specifically, or from the lessons learned by many years of intensive environmental health and safety research of engineered nanomaterials. Ultimately, the different physical and chemical characteristics of the different size classes of plastic pollution (macroplastics, microplastics and nanoplastics) will result in divergent fate and hazards. As nanoscientists specializing in understanding the fate, transport and interactions of nanoparticles in human and environmental systems, in this Perspective, we try to place nanoplastics in the context of global plastic pollution by assessing its sources and risks, and by assessing commonalities nanoplastics may share with other nanosized objects in environmental systems, such as engineered nanomaterials and natural colloids.