1
|
Shi C, Wan M, Qian X, Jing J, Zhou K. Zinc Hydroxystannate/Carbon Nanotube Hybrids as Flame Retardant and Smoke Suppressant for Epoxy Resins. Molecules 2023; 28:6820. [PMID: 37836664 PMCID: PMC10574770 DOI: 10.3390/molecules28196820] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/05/2023] [Revised: 09/02/2023] [Accepted: 09/03/2023] [Indexed: 10/15/2023] Open
Abstract
Novel hybrid flame retardants containing zinc hydroxystannate and carbon nanotubes (ZHS-CNTs) were synthesized using the coprecipitation method, and the structure and morphology of ZHS-CNTs were investigate using an X-ray powder diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM) and thermogravimetric analyzer (TGA). Then, the ZHS, CNTs and ZHS-CNTs were incorporated into EP, respectively, and the flame-retardant and smoke inhibition performance of the composites were compared and studied. Among the three composites, the EP/ZHS-CNT composites have the highest improvements on the fire resistance and smoke inhibition properties. With only 2.0 wt.% ZHS-CNT hybrids, the pHRR of EP/ZHS-CNT composite materials is reduced by 34.2% compared with EP. Moreover, the release of toxic gases including CO, CO2 and SPR from the composites was also effectively inhibited. The mechanisms of flame retardant and smoke inhibition were investigated and the improved properties were generally ascribed to the synergistic flame-retardant effects between ZHS and CNTs, the catalyzing effect of ZHS and the stable network structure of CNTs.
Collapse
Affiliation(s)
- Congling Shi
- Beijing Key Laboratory of Metro Fire and Passenger Transportation Safety, China Academy of Safety Science and Technology, Beijing 100012, China
| | - Mei Wan
- Beijing Key Laboratory of Metro Fire and Passenger Transportation Safety, China Academy of Safety Science and Technology, Beijing 100012, China
| | - Xiaodong Qian
- Beijing Key Laboratory of Metro Fire and Passenger Transportation Safety, China Academy of Safety Science and Technology, Beijing 100012, China
| | - Jingyun Jing
- Beijing Key Laboratory of Metro Fire and Passenger Transportation Safety, China Academy of Safety Science and Technology, Beijing 100012, China
| | - Keqing Zhou
- Faculty of Engineering, China University of Geosciences (Wuhan), Wuhan 430074, China
| |
Collapse
|
2
|
Gomez-Villalba LS, Salcines C, Fort R. Application of Inorganic Nanomaterials in Cultural Heritage Conservation, Risk of Toxicity, and Preventive Measures. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:nano13091454. [PMID: 37176999 PMCID: PMC10180185 DOI: 10.3390/nano13091454] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/27/2023] [Revised: 04/06/2023] [Accepted: 04/12/2023] [Indexed: 05/15/2023]
Abstract
Nanotechnology has allowed for significant progress in architectural, artistic, archaeological, or museum heritage conservation for repairing and preventing damages produced by deterioration agents (weathering, contaminants, or biological actions). This review analyzes the current treatments using nanomaterials, including consolidants, biocides, hydrophobic protectives, mechanical resistance improvers, flame-retardants, and multifunctional nanocomposites. Unfortunately, nanomaterials can affect human and animal health, altering the environment. Right now, it is a priority to stop to analyze its advantages and disadvantages. Therefore, the aims are to raise awareness about the nanotoxicity risks during handling and the subsequent environmental exposure to all those directly or indirectly involved in conservation processes. It reports the human-body interaction mechanisms and provides guidelines for preventing or controlling its toxicity, mentioning the current toxicity research of main compounds and emphasizing the need to provide more information about morphological, structural, and specific features that ultimately contribute to understanding their toxicity. It provides information about the current documents of international organizations (European Commission, NIOSH, OECD, Countries Normative) about worker protection, isolation, laboratory ventilation control, and debris management. Furthermore, it reports the qualitative risk assessment methods, management strategies, dose control, and focus/receptor relationship, besides the latest trends of using nanomaterials in masks and gas emissions control devices, discussing their risk of toxicity.
Collapse
Affiliation(s)
- Luz Stella Gomez-Villalba
- Institute of Geosciences, Spanish National Research Council, Complutense University of Madrid (CSIC, UCM), Calle Dr. Severo Ochoa 7, Planta 4, 28040 Madrid, Spain
| | - Ciro Salcines
- Infrastructures Service, Health and Safety Unit, University of Cantabria, Pabellón de Gobierno, Avenida de los Castros 54, 39005 Santander, Spain
| | - Rafael Fort
- Institute of Geosciences, Spanish National Research Council, Complutense University of Madrid (CSIC, UCM), Calle Dr. Severo Ochoa 7, Planta 4, 28040 Madrid, Spain
| |
Collapse
|
3
|
Abstract
Combustion is a reactive oxidation process that releases energy bound in chemical compounds used as fuels─energy that is needed for power generation, transportation, heating, and industrial purposes. Because of greenhouse gas and local pollutant emissions associated with fossil fuels, combustion science and applications are challenged to abandon conventional pathways and to adapt toward the demand of future carbon neutrality. For the design of efficient, low-emission processes, understanding the details of the relevant chemical transformations is essential. Comprehensive knowledge gained from decades of fossil-fuel combustion research includes general principles for establishing and validating reaction mechanisms and process models, relying on both theory and experiments with a suite of analytic monitoring and sensing techniques. Such knowledge can be advantageously applied and extended to configure, analyze, and control new systems using different, nonfossil, potentially zero-carbon fuels. Understanding the impact of combustion and its links with chemistry needs some background. The introduction therefore combines information on exemplary cultural and technological achievements using combustion and on nature and effects of combustion emissions. Subsequently, the methodology of combustion chemistry research is described. A major part is devoted to fuels, followed by a discussion of selected combustion applications, illustrating the chemical information needed for the future.
Collapse
|
4
|
Composites Filled with Metal Organic Frameworks and Their Derivatives: Recent Developments in Flame Retardants. Polymers (Basel) 2022; 14:polym14235279. [PMID: 36501673 PMCID: PMC9740387 DOI: 10.3390/polym14235279] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/13/2022] [Revised: 11/20/2022] [Accepted: 11/28/2022] [Indexed: 12/11/2022] Open
Abstract
Polymer matrix is vulnerable to fire hazards and needs to add flame retardants to enhance its performance and make its application scenarios more extensive. At this stage, it is more necessary to add multiple flame-retardant elements and build a multi-component synergistic system. Metal organic frameworks (MOFs) have been studied for nearly three decades since their introduction. MOFs are known for their structural advantages but have only been applied to flame-retardant polymers for a relatively short period of time. In this paper, we review the development of MOFs utilized as flame retardants and analyze the flame-retardant mechanisms in the gas phase and condensed phase from the original MOF materials, modified MOF composites, and MOF-derived composites as flame retardants, respectively. The effects of carbon-based materials, phosphorus-based materials, nitrogen-based materials, and biomass on the flame-retardant properties of polymers are discussed in the context of MOFs. The construction of MOF multi-structured flame retardants is also introduced, and a variety of MOF-based flame retardants with different morphologies are shown to broaden the ideas for subsequent research.
Collapse
|
5
|
He H, Tian S, Glaubensklee C, Tarroja B, Samuelsen S, Ogunseitan OA, Schoenung JM. Advancing chemical hazard assessment with decision analysis: A case study on lithium-ion and redox flow batteries used for energy storage. JOURNAL OF HAZARDOUS MATERIALS 2022; 437:129301. [PMID: 35716560 DOI: 10.1016/j.jhazmat.2022.129301] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/07/2022] [Revised: 05/18/2022] [Accepted: 06/02/2022] [Indexed: 06/15/2023]
Abstract
Batteries are important for promoting renewable energy, but, like most engineered products, they contain multiple hazardous materials. The purpose of this study is to evaluate industrial-scale batteries using GreenScreen® for Safer Chemicals, an established chemical hazard assessment (CHA) framework, and to develop a systematic, transparent methodology to quantify the CHA results, harmonize them, and aggregate them into single-value hazard scores, which can facilitate quantitative comparison and a robust evaluation of data gaps, inconsistencies, and uncertainty through the implementation of carefully selected scenarios and stochastic multicriteria acceptability analysis (SMAA). Using multiple authoritative toxicity data sources, six battery products are evaluated: three lithium-ion batteries (lithium iron phosphate, lithium nickel cobalt manganese hydroxide, and lithium manganese oxide), and three redox flow batteries (vanadium redox, zinc-bromine, and all-iron). The CHA results indicate that many materials in these batteries, including reagents and intermediates, inherently exhibit high hazard; therefore, safer materials should be identified and considered in future designs. The scenario analysis and SMAA, combined, provide a quantitative evaluation framework to support the decision-making needed to compare alternative technologies. Thus, this study highlights specific strategies to reduce the use of hazardous materials in complex engineered products before they are widely used in this rapidly-expanding industry sector.
Collapse
Affiliation(s)
- Haoyang He
- Department of Materials Science and Engineering, University of California, Irvine, CA, United States
| | - Shan Tian
- Department of Mechanical and Aerospace Engineering, University of California, Irvine, CA, United States; Advanced Power and Energy Program, University of California, Irvine, CA, United States
| | - Chris Glaubensklee
- Department of Materials Science and Engineering, University of California, Irvine, CA, United States
| | - Brian Tarroja
- Advanced Power and Energy Program, University of California, Irvine, CA, United States; Department of Civil and Environmental Engineering, University of California, Irvine, CA, United States
| | - Scott Samuelsen
- Department of Mechanical and Aerospace Engineering, University of California, Irvine, CA, United States; Advanced Power and Energy Program, University of California, Irvine, CA, United States
| | - Oladele A Ogunseitan
- Department of Population Health and Disease Prevention, University of California, Irvine, CA, United States
| | - Julie M Schoenung
- Department of Materials Science and Engineering, University of California, Irvine, CA, United States.
| |
Collapse
|
6
|
Singh V, Cortes-Ramirez J, Toms LM, Sooriyagoda T, Karatela S. Effects of Polybrominated Diphenyl Ethers on Hormonal and Reproductive Health in E-Waste-Exposed Population: A Systematic Review. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 2022; 19:ijerph19137820. [PMID: 35805479 PMCID: PMC9265575 DOI: 10.3390/ijerph19137820] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/25/2022] [Revised: 06/19/2022] [Accepted: 06/20/2022] [Indexed: 02/03/2023]
Abstract
Electronic waste management is a global rising concern that is primarily being handled by informal recycling practices. These release a mix of potentially hazardous chemicals, which is an important public health concern. These chemicals include polybrominated diphenyl ethers (PBDEs), used as flame retardants in electronic parts, which are persistent in nature and show bioaccumulative characteristics. Although PBDEs are suspected endocrine disruptors, particularly targeting thyroid and reproductive hormone functions, the relationship of PBDEs with these health effects are not well established. We used the Navigation Guide methodology to conduct a systematic review of studies in populations exposed to e-waste to better understand the relationships of these persistent flame retardants with hormonal and reproductive health. We assessed nineteen studies that fit our pre-determined inclusion criteria for risk of bias, indirectness, inconsistency, imprecision, and other criteria that helped rate the overall evidence for its quality and strength of evidence. The studies suggest PBDEs may have an adverse effect on thyroid hormones, reproductive hormones, semen quality, and neonatal health. However, more research is required to establish a relationship of these effects in the e-waste-exposed population. We identified the limitations of the data available and made recommendations for future scientific work.
Collapse
Affiliation(s)
- Vishal Singh
- School of Public Health and Social Work, Queensland University of Technology, Brisbane, QLD 4059, Australia; (L.-M.T.); (T.S.)
- Correspondence:
| | - Javier Cortes-Ramirez
- Centre for Data Science, Queensland University of Technology, Brisbane, QLD 4059, Australia;
- Children’s Health and Environment Program, The University of Queensland, Brisbane, QLD 4101, Australia
- Faculty of Medical and Health Sciences, Universidad de Santander, Cúcuta 540003, Colombia
| | - Leisa-Maree Toms
- School of Public Health and Social Work, Queensland University of Technology, Brisbane, QLD 4059, Australia; (L.-M.T.); (T.S.)
| | - Thilakshika Sooriyagoda
- School of Public Health and Social Work, Queensland University of Technology, Brisbane, QLD 4059, Australia; (L.-M.T.); (T.S.)
| | - Shamshad Karatela
- School of Pharmacy, University of Queensland, Brisbane, QLD 4072, Australia;
- Australian Institute of Tropical Health and Medicine, James Cook University, Mackay, QLD 4740, Australia
| |
Collapse
|
7
|
Turner A. PBDEs in the marine environment: Sources, pathways and the role of microplastics. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 301:118943. [PMID: 35150801 DOI: 10.1016/j.envpol.2022.118943] [Citation(s) in RCA: 24] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/29/2021] [Revised: 01/14/2022] [Accepted: 01/31/2022] [Indexed: 06/14/2023]
Abstract
Brominated flame retardants (BFRs) are an important group of additives in plastics that increase resistance to ignition and slow down the rate of burning. Because of concerns about their environmental and human health impacts, however, some of the most widely employed BFRs, including hexabromocyclododecane (HBCD) and commercial mixtures of penta-, octa- and deca- (poly)bromodiphenyl ethers (PBDEs), have been restricted or phased out. In this review, the oceanic sources and pathways of PBDEs, the most widely used BFRs, are evaluated and quantified, with particular focus on emissions due to migration from plastics into the atmosphere versus emissions associated with the input of retarded or contaminated plastics themselves. Calculations based on available measurements of PBDEs in the environment suggest that 3.5 and 135 tonnes of PBDEs are annually deposited in the ocean when scavenged by aerosols and through air-water gas exchange, respectively, with rivers contributing a further ∼40 tonnes. Calculations based on PBDE migration from plastic products in use or awaiting or undergoing disposal yield similar net inputs to the ocean but indicate a relatively rapid decline over the next two decades in association with the reduction in the production and recycling of these chemicals. Estimates associated with the input of PBDEs to the ocean when "bound" to marine plastics and microplastics range from about 360 to 950 tonnes per year based on the annual production of plastics and PBDEs over the past decade, and from about 20 to 50 tonnes per annum based on the abundance and distribution of PBDEs in marine plastic litter. Because of the persistence and pervasiveness of plastics in the ocean and diffusion coefficients for PBDEs on the order of 10-20 to 10-27 m2 s-1, microplastics are likely to act as a long-term source of these chemicals though gradual migration. Locally, however, and more important from an ecotoxicological perspective, PBDE migration may be significantly enhanced when physically and chemically weathered microplastics are exposed to the oily digestive fluids conditions of fish and seabirds.
Collapse
Affiliation(s)
- Andrew Turner
- School of Geography, Earth and Environmental Sciences, University of Plymouth, Drake Circus, Plymouth, PL4 8AA, UK.
| |
Collapse
|
8
|
Fire Behavior of Wood-Based Composite Materials. Polymers (Basel) 2021; 13:polym13244352. [PMID: 34960903 PMCID: PMC8705567 DOI: 10.3390/polym13244352] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/10/2021] [Revised: 12/04/2021] [Accepted: 12/07/2021] [Indexed: 12/22/2022] Open
Abstract
Wood-based composites such as wood plastic composites (WPC) are emerging as a sustainable and excellent performance materials consisting of wood reinforced with polymer matrix with a variety of applications in construction industries. In this context, wood-based composite materials used in construction industries have witnessed a vigorous growth, leading to a great production activity. However, the main setbacks are their high flammability during fires. To address this issue, flame retardants are utilized to improve the performance of fire properties as well as the flame retardancy of WPC material. In this review, flame retardants employed during manufacturing process with their mechanical properties designed to achieve an enhanced flame retardancy were examined. The addition of flame retardants and manufacturing techniques applied were found to be an optimum condition to improve fire resistance and mechanical properties. The review focuses on the manufacturing techniques, applications, mechanical properties and flammability studies of wood fiber/flour polymer/plastics composites materials. Various flame retardant of WPCs and summary of future prospects were also highlighted.
Collapse
|
9
|
Mohammadi Z, Vahabi M, Sadat SM, Zendehdel R. Risk Assessment of Nano-Flame Retardants Coating in the Selected Construction Industry of Iran by Control Banding Approach. Int J Prev Med 2021; 12:96. [PMID: 34584661 PMCID: PMC8428308 DOI: 10.4103/ijpvm.ijpvm_186_19] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/04/2019] [Accepted: 05/21/2020] [Indexed: 12/04/2022] Open
Abstract
Background: There is a wide range of challenges through the use of nano-material in buildings. By developing construction industries the use of flame retardant nano-materials is a hurdle for human health. However occupational exposure measurement is not applicable for nano-particles monitoring. Risk assessment is an alternative method for industrial hygiene strategies. In this study, we use the control banding approach for risk assessment of 3 nano-fire retardant (NFR) in the building industry. Methods: We used control banding as a risk assessment approach for decision making about nano-materials in the building industry. The risk of nano-fire retardants such as monokote accelerator, monokote Z-106 G and monokote Z-106 HY in the construction industry was studied. The level of risk was evaluated by the matrix of hazard severity and probability score. Hazard severity was scored by toxicological information. The probability score was estimated by the state work operation. Results: A score of hazard severity in monokot Z-106 HY was higher than other nano-materials. The probability score of spraying tasks was lower than mixing and transportation tasks. The results show the application of all nano-materials had the higher risk level in transportation and mixing tasks. The risk level of monokote accelerator and monokote Z-106 G in spraying task is lower than monokot Z-106 HY. Conclusions: There is a high risk level for studied nano-materials in the coating tasks of the construction industry. In conclusion, powerful controlling strategies such as the substitution of nano-materials was suggested to decrease the risk of nano-fire retardants.
Collapse
Affiliation(s)
- Zahra Mohammadi
- Department of Occupational Health Engineering, Student Research Committee, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences, Tehran, Iran
| | - Masoume Vahabi
- Department of Occupational Health Engineering, Student Research Committee, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences, Tehran, Iran
| | - Seyed Mohammad Sadat
- Department of Occupational Health Engineering, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences Tehran, Iran
| | - Rezvan Zendehdel
- Department of Occupational Health Engineering, School of Public Health and Safety, Shahid Beheshti University of Medical Sciences Tehran, Iran
| |
Collapse
|
10
|
Phosphorus/phosphorus-nitrogen flame retardants applied to polyurethane/rice husk eco-composites: thermal behavior, flame retardancy, and physico-mechanical properties. Polym Bull (Berl) 2021. [DOI: 10.1007/s00289-020-03237-w] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
11
|
Use of a Mixture of Polyols Based on Metasilicic Acid and Recycled PLA for Synthesis of Rigid Polyurethane Foams Susceptible to Biodegradation. Int J Mol Sci 2020; 22:ijms22010069. [PMID: 33374754 PMCID: PMC7795053 DOI: 10.3390/ijms22010069] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2020] [Revised: 12/16/2020] [Accepted: 12/21/2020] [Indexed: 11/16/2022] Open
Abstract
Two polyol raw materials were obtained in the conducted research, one based on metasilicic acid (MSA), the other based on poly(lactic acid) (PLA) waste. The obtained polyols were characterized in terms of their applicability for the production of rigid polyurethane foams (RPUFs). Their basic analytical properties (hydroxyl number, acid number, elemental analysis) and physicochemical properties (density, viscosity) were determined. The assumed chemical structure of the obtained new compounds was confirmed by performing FTIR and 1H NMR spectroscopic tests. Formulations for the synthesis of RPUFs were developed on the basis of the obtained research results. A mixture of polyols based on MSA and PLA in a weight ratio of 1:1 was used as the polyol component in the polyurethane formulation. The reference foam in these tests was a foam that was synthesized only on the basis of MSA-polyol. The obtained RPUFs were tested for basic functional properties (apparent density, compressive strength, water absorption, thermal conductivity coefficient etc.). Susceptibility to biodegradation in soil environment was also tested. It was found that the use of mixture of polyols based on MSA and PLA positively affected the properties of the obtained foam. The polyurethane foam based on this polyol mixture showed good thermal resistance and significantly reduced flammability in comparison with the foam based MSA-polyol. Moreover, it showed higher compressive strength, lower thermal conductivity and biodegradability in soil. The results of the conducted tests confirmed that the new foam was characterized by very good performance properties. In addition, this research provides information on new waste management opportunities and fits into the doctrine of sustainable resource management offered by the circular economy.
Collapse
|
12
|
DOPO-Functionalized Molybdenum Disulfide and its Impact on the Thermal Properties of Polyethylene and Poly(Lactic Acid) Composites. NANOMATERIALS 2019; 9:nano9111637. [PMID: 31752223 PMCID: PMC6915400 DOI: 10.3390/nano9111637] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/16/2019] [Revised: 11/08/2019] [Accepted: 11/15/2019] [Indexed: 11/21/2022]
Abstract
The fabrication of conventional or biodegradable polymers with improved thermal and fire-resistant properties is an important task for their successful application in various branches of the industry. In this work, few-layered molybdenum disulfide was functionalized with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide and introduced into polyethylene and poly(lactic acid) matrixes. The obtained polyethylene composite samples displayed improved thermal stability, significant reduction in CO emissions, improved fire-resistant properties, and over 100% increases in thermal conductivity. Poly(lactic acid) composites displayed less impressive results, but have managed to improve some values, such as CO emissions, peak heat release rate, and total heat release in comparison to pristine polymer.
Collapse
|
13
|
Tickner J, Jacobs M, Malloy T, Buck T, Stone A, Blake A, Edwards S. Advancing alternatives assessment for safer chemical substitution: A research and practice agenda. INTEGRATED ENVIRONMENTAL ASSESSMENT AND MANAGEMENT 2019; 15:855-866. [PMID: 30117284 DOI: 10.1002/ieam.4094] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2018] [Revised: 05/29/2018] [Accepted: 08/13/2018] [Indexed: 06/08/2023]
Abstract
Alternatives assessment has emerged as a science policy field that supports the evaluation and adoption of safer chemistries in manufacturing processes and consumer products. The recent surge in the development and practice of alternatives assessment has revealed notable methodological challenges. Spurred by this need, we convened an informal community of practice comprising industry experts, academics, and scientists within government and nongovernmental organizations to prioritize a research and practice agenda for the next 5 years that, if implemented, would significantly advance the field of alternatives assessment. With input from over 40 experts, the agenda outlines specific needs to advance methods, tools, and guidance in 5 critical areas: hazard assessment, comparative exposure characterization, life cycle considerations, decision making, and professional practice. Fifteen research and practice needs were identified, ranging from relatively simple efforts to define a minimum hazard data set to the development of more complex performance and decision-analytic methods and data integration tools. Some research needs involve adapting existing approaches to the alternatives assessment context, while others will require the development of entirely new methods and tools. The proposed research and practice agenda is ambitious. Implementing it will require expanding the current network of researchers from academia, government, and industry, as well as increased funding for methodological, application, and evaluation research. Integr Environ Assess Manag 2018;00:000-000. © 2018 SETAC.
Collapse
Affiliation(s)
- Joel Tickner
- University of Massachusetts Lowell, Department of Public Health, Lowell, Massachusetts, USA
- Lowell Center for Sustainable Production, University of Massachusetts Lowell, Lowell, Massachusetts, USA
| | - Molly Jacobs
- University of Massachusetts Lowell, Department of Public Health, Lowell, Massachusetts, USA
- Lowell Center for Sustainable Production, University of Massachusetts Lowell, Lowell, Massachusetts, USA
| | - Tim Malloy
- University of California, Los Angeles, School of Law, Los Angeles, California, USA
| | - Topher Buck
- Northeast Waste Management Officials' Association, Interstate Chemicals Clearinghouse, Boston, Massachusetts, USA
| | - Alex Stone
- Washington Department of Ecology, Lacey, Washington, USA
| | - Ann Blake
- Environmental and Public Health Consulting, Alameda, California, USA
| | - Sally Edwards
- Lowell Center for Sustainable Production, University of Massachusetts Lowell, Lowell, Massachusetts, USA
| |
Collapse
|
14
|
Semenzin E, Giubilato E, Badetti E, Picone M, Volpi Ghirardini A, Hristozov D, Brunelli A, Marcomini A. Guiding the development of sustainable nano-enabled products for the conservation of works of art: proposal for a framework implementing the Safe by Design concept. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2019; 26:26146-26158. [PMID: 31280439 PMCID: PMC6717188 DOI: 10.1007/s11356-019-05819-2] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/07/2019] [Accepted: 06/24/2019] [Indexed: 06/09/2023]
Abstract
Nanotechnology provides innovative and promising solutions for the conservation of cultural heritage, but the development and application of new nano-enabled products pose concerns regarding their human health and environmental risks. To address these issues, we propose a sustainability framework implementing the Safe by Design concept to support product developers in the early steps of product development, with the aim to provide safer nano-formulations for conservation, while retaining their functionality. In addition, this framework can support the assessment of sustainability of new products and their comparison to their conventional chemical counterparts if any. The goal is to promote the selection and use of safer and more sustainable nano-based products in different conservation contexts. The application of the proposed framework is illustrated through a hypothetical case which provides a realistic example of the methodological steps to be followed, tailored and iterated along the decision-making process.
Collapse
Affiliation(s)
- Elena Semenzin
- Department of Environmental Sciences, Informatics and Statistics, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy.
| | - Elisa Giubilato
- Department of Environmental Sciences, Informatics and Statistics, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy
| | - Elena Badetti
- Department of Environmental Sciences, Informatics and Statistics, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy
| | - Marco Picone
- Department of Environmental Sciences, Informatics and Statistics, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy
| | - Annamaria Volpi Ghirardini
- Department of Environmental Sciences, Informatics and Statistics, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy
| | - Danail Hristozov
- Department of Environmental Sciences, Informatics and Statistics, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy
| | - Andrea Brunelli
- Department of Environmental Sciences, Informatics and Statistics, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy
| | - Antonio Marcomini
- Department of Environmental Sciences, Informatics and Statistics, Ca' Foscari University of Venice, Via Torino 155, 30172, Venice, Italy
| |
Collapse
|
15
|
Study on Fire Resistance Ability and Mechanical Properties of Composites Based on Epikote 240 Epoxy Resin and Thermoelectric Fly Ash: An Ecofriendly Additive. J CHEM-NY 2019. [DOI: 10.1155/2019/2635231] [Citation(s) in RCA: 12] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
In this study, fly ash was tested as a filler in epoxy with concentrations of 5, 10, and 20 wt.%. Fly ash particles were modified by chemical treatments (using NaOH and HCl) to enhance the compatibility and adhesion, making mechanical properties and flame retardancy of materials better. Flexural strength, tensile strength, and impact resistance decrease as fly ash content increases. The compressive strength is further increased by the addition of fly ash (compressive strength of the materials including 5, 10, 20 wt.% of fly ash modified with NaOH is 176.01, 189.90, and 197.07 MPa, respectively). The interface between fly ash and epoxy matrix plays an important role in determining the mechanical strength and flame retardancy of synthetic materials. The results of UL-94HB and LOI test method for composite materials including 20 wt.% fly ash (modified by NaOH) reached 13.45 mm/min and 22.4%, respectively. These results showed that fly ash is an efficient additive as a flame retardant which decreases the amounts of additives in products and improves their efficiency. Fly ash was also dispersed into epoxy resin to enhance its resistance to oxidation.
Collapse
|
16
|
Čulin J. Brominated flame retardants: Recommendation for different listing under the Hong Kong Convention. THE SCIENCE OF THE TOTAL ENVIRONMENT 2018; 636:919-926. [PMID: 29729509 DOI: 10.1016/j.scitotenv.2018.04.342] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/12/2018] [Revised: 04/03/2018] [Accepted: 04/25/2018] [Indexed: 06/08/2023]
Abstract
When the Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships, 2009 enters into effect, ships to be sent for recycling will be required to carry an Inventory of Hazardous Materials (IHM) on board, which identifies the hazardous materials contained in the ship's structure or equipment. In its current form, IHM covers two classes of brominated flame retardants (BFRs), namely polybrominated biphenyls and polybrominated diphenyl ethers. Emerging evidence from recent literature suggests that members of all classes of BFRs are present in all environmental compartments and that exposure to them is associated with a wide range of harmful effects in humans and animals, effects that include endocrine disruption. Despite a growing body of research, the necessary data to perform health and environmental risk assessment are still lacking. This paper reviews environmental and human health impacts and discusses some issues of BFR environmental management. It is suggested that based on a precautionary approach, the inclusion of all classes of BFRs in IHM is warranted.
Collapse
Affiliation(s)
- Jelena Čulin
- University of Zadar, Maritime Department, M. Pavlinovića 1, 23000 Zadar, Croatia.
| |
Collapse
|
17
|
Carbon Fibers Decorated by Polyelectrolyte Complexes Toward Their Epoxy Resin Composites with High Fire Safety. CHINESE JOURNAL OF POLYMER SCIENCE 2018. [DOI: 10.1007/s10118-018-2164-1] [Citation(s) in RCA: 28] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/17/2023]
|
18
|
Synthesis and application of synergistic azo-boron-BPA / polydopamine as efficient flame retardant for poly(lactic acid). Polym Degrad Stab 2018. [DOI: 10.1016/j.polymdegradstab.2018.03.018] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/17/2022]
|
19
|
Affiliation(s)
- Alexander B. Morgan
- Center for Flame Retardant Material Science, University of Dayton Research Institute, Dayton, Ohio, USA
| |
Collapse
|
20
|
Lignocellulose-Chitosan-Multiwalled Carbon Nanotube Composites with Improved Mechanical Strength, Dimensional Stability and Fire Retardancy. Polymers (Basel) 2018; 10:polym10030341. [PMID: 30966376 PMCID: PMC6415154 DOI: 10.3390/polym10030341] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/25/2018] [Revised: 03/12/2018] [Accepted: 03/16/2018] [Indexed: 11/17/2022] Open
Abstract
A novel composite composed of lignocellulose (LC), glutaraldehyde crosslinked chitosan (GC) and multiwalled carbon nanotube (MWCNT) was fabricated by the hot-pressing process. The effect of the additional GC and MWCNT on the mechanical strength, dimensional stability and fire retardancy of lignocellulose composites was investigated. The results showed that LC/GC/MWCNT composite exhibited the maximum modulus of rupture (MOR) of 35.3 MPa, modulus of elasticity (MOE) of 2789.1 MPa and internal bonding (IB) strength of 1.2 MPa. Meanwhile, the LC/GC/MWCNT composite displayed improved dimensional stability with a thickness swelling (TS) value of 22.4%. Besides, the LC/GC/MWCNT composite exhibited improved fire retardancy with a limiting oxygen index of 29.0%. The peak heat release rate, the total heat release, the total smoke production and the maximum smoke production ratio of LC/GC/MWCNT composite decreased by 15.9%, 10.7%, 45.5% and 20.7% compared with those of LC composite, respectively. Therefore, the LC/GC/MWCNT composite may be a promising candidate for green wood based composites.
Collapse
|
21
|
Januszewski R, Dutkiewicz M, Maciejewski H, Marciniec B. Synthesis and characterization of phosphorus-containing, silicone rubber based flame retardant coatings. REACT FUNCT POLYM 2018. [DOI: 10.1016/j.reactfunctpolym.2017.12.006] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
22
|
Bakhiyi B, Gravel S, Ceballos D, Flynn MA, Zayed J. Has the question of e-waste opened a Pandora's box? An overview of unpredictable issues and challenges. ENVIRONMENT INTERNATIONAL 2018; 110:173-192. [PMID: 29122313 DOI: 10.1016/j.envint.2017.10.021] [Citation(s) in RCA: 40] [Impact Index Per Article: 6.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/16/2017] [Revised: 10/24/2017] [Accepted: 10/26/2017] [Indexed: 05/23/2023]
Abstract
Despite regulatory efforts and position papers, electrical and electronic waste (e-waste) remains ill-managed as evidenced by the extremely low rates of proper e-waste recycling (e-recycling) worldwide, ongoing illegal shipments to developing countries and constantly reported human health issues and environmental pollution. The objectives of this review are, first, to expose the complexity of e-waste problems, and then to suggest possible upstream and downstream solutions. Exploring e-waste issues is akin to opening a Pandora's box. Thus, a review of prevailing e-waste management practices reveals complex and often intertwined gaps, issues and challenges. These include the absence of any consistent definition of e-waste to date, a prevalent toxic potential still involving already banned or restricted hazardous components such as heavy metals and persistent and bioaccumulative organic compounds, a relentless growth in e-waste volume fueled by planned obsolescence and unsustainable consumption, problematic e-recycling processes, a fragile formal e-recycling sector, sustained and more harmful informal e-recycling practices, and more convoluted and unpredictable patterns of illegal e-waste trade. A close examination of the e-waste legacy contamination reveals critical human health concerns, including significant occupational exposure during both formal and informal e-recycling, and persistent environmental contamination, particularly in some developing countries. However, newly detected e-waste contaminants as well as unexpected sources and environmental fates of contaminants are among the emerging issues that raise concerns. Moreover, scientific knowledge gaps remain regarding the complexity and magnitude of the e-waste legacy contamination, specifically, a comprehensive characterization of e-waste contaminants, information on the scale of legacy contamination in developing countries and on the potential environmental damage in developed countries, and a stronger body of evidence of adverse health effects specifically ascribed to e-waste contaminants. However, the knowledge accumulated to date is sufficient to raise awareness and concern among all stakeholders. Potential solutions to curb e-waste issues should be addressed comprehensively, by focusing on two fronts: upstream and downstream. Potential upstream solutions should focus on more rational and eco-oriented consumer habits in order to decrease e-waste quantities while fostering ethical and sustained commitments from manufacturers, which include a limited usage of hazardous compounds and an optimal increase in e-waste recyclability. At the downstream level, solutions should include suitable and pragmatic actions to progressively reduce the illegal e-waste trade particularly through international cooperation and coordination, better enforcement of domestic laws, and monitoring in both exporting and receiving countries, along with the supervised integration of the informal sector into the recycling system of developing countries and global expansion of formal e-waste collection and recycling activities. Downstream solutions should also introduce stronger reverse logistics, together with upgraded, more affordable, and eco-friendly and worker-friendly e-recycling technologies to ensure that benefits are derived fully and safely from the great economic potential of e-waste.
Collapse
Affiliation(s)
- Bouchra Bakhiyi
- Department of Environmental and Occupational Health, School of Public Health, Université de Montréal, Montreal, Quebec, Canada
| | - Sabrina Gravel
- Department of Environmental and Occupational Health, School of Public Health, Université de Montréal, Montreal, Quebec, Canada; Institut de Recherche Robert-Sauvé en Santé et en Sécurité du Travail (IRSST), Montreal, Quebec, Canada
| | - Diana Ceballos
- Department of Environmental Health, Harvard T.H. Chan School of Public Health, Boston, MA, USA
| | - Michael A Flynn
- National Institute for Occupational Safety and Health, Cincinnati, OH, USA
| | - Joseph Zayed
- Department of Environmental and Occupational Health, School of Public Health, Université de Montréal, Montreal, Quebec, Canada; Institut de Recherche Robert-Sauvé en Santé et en Sécurité du Travail (IRSST), Montreal, Quebec, Canada.
| |
Collapse
|
23
|
Ramgobin A, Fontaine G, Penverne C, Bourbigot S. Thermal Stability and Fire Properties of Salen and Metallosalens as Fire Retardants in Thermoplastic Polyurethane (TPU). MATERIALS 2017; 10:ma10060665. [PMID: 28773025 PMCID: PMC5554046 DOI: 10.3390/ma10060665] [Citation(s) in RCA: 19] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/24/2017] [Revised: 06/04/2017] [Accepted: 06/12/2017] [Indexed: 11/16/2022]
Abstract
This study deals with the synthesis and evaluation of salen based derivatives as fire retardants in thermoplastic polyurethane. Salens, hydroxysalens and their first row transition metal complexes (salen-M) were synthesized (Copper, Manganese, Nickel and Zinc). They were then incorporated in thermoplastic polyurethane (TPU) with a loading as low as 10:1 weight ratio. The thermal stability as well as the fire properties of the formulations were evaluated. Thermogravimetric analysis (TGA) showed that different coordination metals on the salen could induce different decomposition pathways when mixed with TPU. The Pyrolysis Combustion Flow Calorimetry (PCFC) results showed that some M-salen have the ability to significantly decrease the peak heat release rate (−61% compared to neat TPU) and total heat released (−63% compared to neat TPU) when formulated at 10:1 wt % ratio in TPU. Mass Loss Cone Calorimetry (MLC) results have shown that some additives (salen-Cu and salen-Mn) exhibit very promising performance and they are good candidates as flame-retardants for TPU.
Collapse
Affiliation(s)
- Aditya Ramgobin
- UMR 8207-UMET-Unité Matériaux et Transformations, University of Lille, Ecole Nationale Supérieure de Chimie Lille, F-59652 Villeneuve d'Ascq, France.
| | - Gaëlle Fontaine
- UMR 8207-UMET-Unité Matériaux et Transformations, University of Lille, Ecole Nationale Supérieure de Chimie Lille, F-59652 Villeneuve d'Ascq, France.
| | - Christophe Penverne
- USR 3290-MSAP-Miniaturisation pour la Synthèse, l'Analyse et la Protéomique, University of Lille, F-59652 Villeneuve d'Ascq, France.
| | - Serge Bourbigot
- UMR 8207-UMET-Unité Matériaux et Transformations, University of Lille, Ecole Nationale Supérieure de Chimie Lille, F-59652 Villeneuve d'Ascq, France.
| |
Collapse
|